diff options
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/mmc.c | 140 | ||||
-rw-r--r-- | drivers/mmc/mmc_block.c | 8 |
2 files changed, 119 insertions, 29 deletions
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 105f419d08c..b48c277312d 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -289,7 +289,10 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card, else limit_us = 100000; - if (timeout_us > limit_us) { + /* + * SDHC cards always use these fixed values. + */ + if (timeout_us > limit_us || mmc_card_blockaddr(card)) { data->timeout_ns = limit_us * 1000; data->timeout_clks = 0; } @@ -372,7 +375,7 @@ static inline void mmc_set_ios(struct mmc_host *host) mmc_hostname(host), ios->clock, ios->bus_mode, ios->power_mode, ios->chip_select, ios->vdd, ios->bus_width); - + host->ops->set_ios(host, ios); } @@ -588,34 +591,65 @@ static void mmc_decode_csd(struct mmc_card *card) if (mmc_card_sd(card)) { csd_struct = UNSTUFF_BITS(resp, 126, 2); - if (csd_struct != 0) { + + switch (csd_struct) { + case 0: + m = UNSTUFF_BITS(resp, 115, 4); + e = UNSTUFF_BITS(resp, 112, 3); + csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10; + csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100; + + m = UNSTUFF_BITS(resp, 99, 4); + e = UNSTUFF_BITS(resp, 96, 3); + csd->max_dtr = tran_exp[e] * tran_mant[m]; + csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); + + e = UNSTUFF_BITS(resp, 47, 3); + m = UNSTUFF_BITS(resp, 62, 12); + csd->capacity = (1 + m) << (e + 2); + + csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); + csd->read_partial = UNSTUFF_BITS(resp, 79, 1); + csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); + csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); + csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); + csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); + csd->write_partial = UNSTUFF_BITS(resp, 21, 1); + break; + case 1: + /* + * This is a block-addressed SDHC card. Most + * interesting fields are unused and have fixed + * values. To avoid getting tripped by buggy cards, + * we assume those fixed values ourselves. + */ + mmc_card_set_blockaddr(card); + + csd->tacc_ns = 0; /* Unused */ + csd->tacc_clks = 0; /* Unused */ + + m = UNSTUFF_BITS(resp, 99, 4); + e = UNSTUFF_BITS(resp, 96, 3); + csd->max_dtr = tran_exp[e] * tran_mant[m]; + csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); + + m = UNSTUFF_BITS(resp, 48, 22); + csd->capacity = (1 + m) << 10; + + csd->read_blkbits = 9; + csd->read_partial = 0; + csd->write_misalign = 0; + csd->read_misalign = 0; + csd->r2w_factor = 4; /* Unused */ + csd->write_blkbits = 9; + csd->write_partial = 0; + break; + default: printk("%s: unrecognised CSD structure version %d\n", mmc_hostname(card->host), csd_struct); mmc_card_set_bad(card); return; } - - m = UNSTUFF_BITS(resp, 115, 4); - e = UNSTUFF_BITS(resp, 112, 3); - csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10; - csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100; - - m = UNSTUFF_BITS(resp, 99, 4); - e = UNSTUFF_BITS(resp, 96, 3); - csd->max_dtr = tran_exp[e] * tran_mant[m]; - csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); - - e = UNSTUFF_BITS(resp, 47, 3); - m = UNSTUFF_BITS(resp, 62, 12); - csd->capacity = (1 + m) << (e + 2); - - csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); - csd->read_partial = UNSTUFF_BITS(resp, 79, 1); - csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); - csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); - csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); - csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); - csd->write_partial = UNSTUFF_BITS(resp, 21, 1); } else { /* * We only understand CSD structure v1.1 and v1.2. @@ -848,6 +882,41 @@ static int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) return err; } +static int mmc_send_if_cond(struct mmc_host *host, u32 ocr, int *rsd2) +{ + struct mmc_command cmd; + int err, sd2; + static const u8 test_pattern = 0xAA; + + /* + * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND + * before SD_APP_OP_COND. This command will harmlessly fail for + * SD 1.0 cards. + */ + cmd.opcode = SD_SEND_IF_COND; + cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern; + cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR; + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err == MMC_ERR_NONE) { + if ((cmd.resp[0] & 0xFF) == test_pattern) { + sd2 = 1; + } else { + sd2 = 0; + err = MMC_ERR_FAILED; + } + } else { + /* + * Treat errors as SD 1.0 card. + */ + sd2 = 0; + err = MMC_ERR_NONE; + } + if (rsd2) + *rsd2 = sd2; + return err; +} + /* * Discover cards by requesting their CID. If this command * times out, it is not an error; there are no further cards @@ -1334,6 +1403,10 @@ static void mmc_setup(struct mmc_host *host) mmc_power_up(host); mmc_idle_cards(host); + err = mmc_send_if_cond(host, host->ocr_avail, NULL); + if (err != MMC_ERR_NONE) { + return; + } err = mmc_send_app_op_cond(host, 0, &ocr); /* @@ -1386,10 +1459,21 @@ static void mmc_setup(struct mmc_host *host) * all get the idea that they should be ready for CMD2. * (My SanDisk card seems to need this.) */ - if (host->mode == MMC_MODE_SD) - mmc_send_app_op_cond(host, host->ocr, NULL); - else + if (host->mode == MMC_MODE_SD) { + int err, sd2; + err = mmc_send_if_cond(host, host->ocr, &sd2); + if (err == MMC_ERR_NONE) { + /* + * If SD_SEND_IF_COND indicates an SD 2.0 + * compliant card and we should set bit 30 + * of the ocr to indicate that we can handle + * block-addressed SDHC cards. + */ + mmc_send_app_op_cond(host, host->ocr | (sd2 << 30), NULL); + } + } else { mmc_send_op_cond(host, host->ocr, NULL); + } mmc_discover_cards(host); diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index 87713572293..5a4eacac0bb 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -237,7 +237,9 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.mrq.cmd = &brq.cmd; brq.mrq.data = &brq.data; - brq.cmd.arg = req->sector << 9; + brq.cmd.arg = req->sector; + if (!mmc_card_blockaddr(card)) + brq.cmd.arg <<= 9; brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; brq.data.blksz = 1 << md->block_bits; brq.data.blocks = req->nr_sectors >> (md->block_bits - 9); @@ -494,6 +496,10 @@ mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) struct mmc_command cmd; int err; + /* Block-addressed cards ignore MMC_SET_BLOCKLEN. */ + if (mmc_card_blockaddr(card)) + return 0; + mmc_card_claim_host(card); cmd.opcode = MMC_SET_BLOCKLEN; cmd.arg = 1 << md->block_bits; |