aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/host/Kconfig12
-rw-r--r--drivers/mmc/host/Makefile1
-rw-r--r--drivers/mmc/host/sdhci-pci.c1
-rw-r--r--drivers/mmc/host/sdhci-s3c.c375
-rw-r--r--drivers/mmc/host/sdhci.c71
-rw-r--r--drivers/mmc/host/sdhci.h13
6 files changed, 464 insertions, 9 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dfa585f7fea..da40c586aca 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -48,6 +48,18 @@ config MMC_SDHCI_PCI
If unsure, say N.
+config MMC_SDHCI_S3C
+ tristate "SDHCI support on Samsung S3C SoC"
+ depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX)
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ often referrered to as the HSMMC block in some of the Samsung S3C
+ range of SoC.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_RICOH_MMC
tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)"
depends on MMC_SDHCI_PCI
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index c794cc5ce44..779b1ea9a60 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MMC_PXA) += pxamci.o
obj-$(CONFIG_MMC_IMX) += imxmmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
+obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 9bd7026b002..859f53aad36 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -391,6 +391,7 @@ static int sdhci_pci_enable_dma(struct sdhci_host *host)
static struct sdhci_ops sdhci_pci_ops = {
.enable_dma = sdhci_pci_enable_dma,
+ .change_clock = sdhci_change_clock,
};
/*****************************************************************************\
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
new file mode 100644
index 00000000000..a1ddb136d9e
--- /dev/null
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -0,0 +1,375 @@
+/* linux/drivers/mmc/host/sdhci-s3c.c
+ *
+ * Copyright 2008 Openmoko Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * SDHCI (HSMMC) support for Samsung SoC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+#include "sdhci.h"
+
+#define MAX_BUS_CLK (4)
+
+struct sdhci_s3c {
+ struct sdhci_host *host;
+ struct platform_device *pdev;
+ struct resource *ioarea;
+ struct s3c_sdhci_platdata *pdata;
+ unsigned int cur_clk;
+
+ struct clk *clk_io; /* clock for io bus */
+ struct clk *clk_bus[MAX_BUS_CLK];
+};
+
+static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
+{
+ return sdhci_priv(host);
+}
+
+static u32 get_curclk(u32 ctrl2)
+{
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+
+ return ctrl2;
+}
+
+static void sdhci_s3c_check_sclk(struct sdhci_host *host)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+
+ if (get_curclk(tmp) != ourhost->cur_clk) {
+ dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
+
+ tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+ writel(tmp, host->ioaddr + 0x80);
+ }
+}
+
+static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ struct clk *busclk;
+ unsigned int rate, max;
+ int clk;
+
+ /* note, a reset will reset the clock source */
+
+ sdhci_s3c_check_sclk(host);
+
+ for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
+ busclk = ourhost->clk_bus[clk];
+ if (!busclk)
+ continue;
+
+ rate = clk_get_rate(busclk);
+ if (rate > max)
+ max = rate;
+ }
+
+ return max;
+}
+
+static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host)
+{
+ return sdhci_s3c_get_max_clk(host) / 1000000;
+}
+
+static void sdhci_s3c_set_ios(struct sdhci_host *host,
+ struct mmc_ios *ios)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ struct s3c_sdhci_platdata *pdata = ourhost->pdata;
+ int width;
+
+ sdhci_s3c_check_sclk(host);
+
+ if (ios->power_mode != MMC_POWER_OFF) {
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_4:
+ width = 4;
+ break;
+ case MMC_BUS_WIDTH_1:
+ width = 1;
+ break;
+ default:
+ BUG();
+ }
+
+ if (pdata->cfg_gpio)
+ pdata->cfg_gpio(ourhost->pdev, width);
+ }
+
+ if (pdata->cfg_card)
+ pdata->cfg_card(ourhost->pdev, host->ioaddr,
+ ios, host->mmc->card);
+}
+
+static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
+ unsigned int src,
+ unsigned int wanted)
+{
+ unsigned long rate;
+ struct clk *clksrc = ourhost->clk_bus[src];
+ int div;
+
+ if (!clksrc)
+ return UINT_MAX;
+
+ rate = clk_get_rate(clksrc);
+
+ for (div = 1; div < 256; div *= 2) {
+ if ((rate / div) <= wanted)
+ break;
+ }
+
+ dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
+ src, rate, wanted, rate / div);
+
+ return (wanted - (rate / div));
+}
+
+static void sdhci_s3c_change_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ unsigned int best = UINT_MAX;
+ unsigned int delta;
+ int best_src = 0;
+ int src;
+ u32 ctrl;
+
+ for (src = 0; src < MAX_BUS_CLK; src++) {
+ delta = sdhci_s3c_consider_clock(ourhost, src, clock);
+ if (delta < best) {
+ best = delta;
+ best_src = src;
+ }
+ }
+
+ dev_dbg(&ourhost->pdev->dev,
+ "selected source %d, clock %d, delta %d\n",
+ best_src, clock, best);
+
+ /* turn clock off to card before changing clock source */
+ writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+
+ /* select the new clock source */
+
+ if (ourhost->cur_clk != best_src) {
+ struct clk *clk = ourhost->clk_bus[best_src];
+
+ ourhost->cur_clk = best_src;
+ host->max_clk = clk_get_rate(clk);
+ host->timeout_clk = host->max_clk / 1000000;
+
+ ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+ ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+ writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+ }
+
+ sdhci_change_clock(host, clock);
+}
+
+static struct sdhci_ops sdhci_s3c_ops = {
+ .get_max_clock = sdhci_s3c_get_max_clk,
+ .get_timeout_clock = sdhci_s3c_get_timeout_clk,
+ .change_clock = sdhci_s3c_change_clock,
+ .set_ios = sdhci_s3c_set_ios,
+};
+
+static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
+{
+ struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct sdhci_host *host;
+ struct sdhci_s3c *sc;
+ struct resource *res;
+ int ret, irq, ptr, clks;
+
+ if (!pdata) {
+ dev_err(dev, "no device data specified\n");
+ return -ENOENT;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "no irq specified\n");
+ return irq;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "no memory specified\n");
+ return -ENOENT;
+ }
+
+ host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
+ if (IS_ERR(host)) {
+ dev_err(dev, "sdhci_alloc_host() failed\n");
+ return PTR_ERR(host);
+ }
+
+ sc = sdhci_priv(host);
+
+ sc->host = host;
+ sc->pdev = pdev;
+ sc->pdata = pdata;
+
+ sc->clk_io = clk_get(dev, "hsmmc");
+ if (IS_ERR(sc->clk_io)) {
+ dev_err(dev, "failed to get io clock\n");
+ ret = PTR_ERR(sc->clk_io);
+ goto err_io_clk;
+ }
+
+ /* enable the local io clock and keep it running for the moment. */
+ clk_enable(sc->clk_io);
+
+ for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
+ struct clk *clk;
+ char *name = pdata->clocks[ptr];
+
+ if (name == NULL)
+ continue;
+
+ clk = clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to get clock %s\n", name);
+ continue;
+ }
+
+ clks++;
+ sc->clk_bus[ptr] = clk;
+ clk_enable(clk);
+
+ dev_info(dev, "clock source %d: %s (%ld Hz)\n",
+ ptr, name, clk_get_rate(clk));
+ }
+
+ if (clks == 0) {
+ dev_err(dev, "failed to find any bus clocks\n");
+ ret = -ENOENT;
+ goto err_no_busclks;
+ }
+
+ sc->ioarea = request_mem_region(res->start, resource_size(res),
+ mmc_hostname(host->mmc));
+ if (!sc->ioarea) {
+ dev_err(dev, "failed to reserve register area\n");
+ ret = -ENXIO;
+ goto err_req_regs;
+ }
+
+ host->ioaddr = ioremap_nocache(res->start, resource_size(res));
+ if (!host->ioaddr) {
+ dev_err(dev, "failed to map registers\n");
+ ret = -ENXIO;
+ goto err_req_regs;
+ }
+
+ /* Ensure we have minimal gpio selected CMD/CLK/Detect */
+ if (pdata->cfg_gpio)
+ pdata->cfg_gpio(pdev, 0);
+
+ sdhci_s3c_check_sclk(host);
+
+ host->hw_name = "samsung-hsmmc";
+ host->ops = &sdhci_s3c_ops;
+ host->quirks = 0;
+ host->irq = irq;
+
+ /* Setup quirks for the controller */
+
+ /* Currently with ADMA enabled we are getting some length
+ * interrupts that are not being dealt with, do disable
+ * ADMA until this is sorted out. */
+ host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
+ host->quirks |= SDHCI_QUIRK_32BIT_ADMA_SIZE;
+
+ /* It seems we do not get an DATA transfer complete on non-busy
+ * transfers, not sure if this is a problem with this specific
+ * SDHCI block, or a missing configuration that needs to be set. */
+ host->quirks |= SDHCI_QUIRK_NO_TCIRQ_ON_NOT_BUSY;
+
+ host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_32BIT_DMA_SIZE);
+
+ ret = sdhci_add_host(host);
+ if (ret) {
+ dev_err(dev, "sdhci_add_host() failed\n");
+ goto err_add_host;
+ }
+
+ return 0;
+
+ err_add_host:
+ release_resource(sc->ioarea);
+ kfree(sc->ioarea);
+
+ err_req_regs:
+ for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
+ clk_disable(sc->clk_bus[ptr]);
+ clk_put(sc->clk_bus[ptr]);
+ }
+
+ err_no_busclks:
+ clk_disable(sc->clk_io);
+ clk_put(sc->clk_io);
+
+ err_io_clk:
+ sdhci_free_host(host);
+
+ return ret;
+}
+
+static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver sdhci_s3c_driver = {
+ .probe = sdhci_s3c_probe,
+ .remove = __devexit_p(sdhci_s3c_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "s3c-sdhci",
+ },
+};
+
+static int __init sdhci_s3c_init(void)
+{
+ return platform_driver_register(&sdhci_s3c_driver);
+}
+
+static void __exit sdhci_s3c_exit(void)
+{
+ platform_driver_unregister(&sdhci_s3c_driver);
+}
+
+module_init(sdhci_s3c_init);
+module_exit(sdhci_s3c_exit);
+
+MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPLv2");
+MODULE_ALIAS("platform:s3c-sdhci");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 4d010a984be..ed2c89254df 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -73,6 +73,11 @@ static void sdhci_dumpregs(struct sdhci_host *host)
readl(host->ioaddr + SDHCI_CAPABILITIES),
readl(host->ioaddr + SDHCI_MAX_CURRENT));
+ if (host->flags & SDHCI_USE_ADMA)
+ printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+
printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
}
@@ -731,6 +736,23 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
}
+static void shdci_check_dma_overrun(struct sdhci_host *host, struct mmc_data *data)
+{
+ u32 dma_pos = readl(host->ioaddr + SDHCI_DMA_ADDRESS);
+ u32 dma_start = sg_dma_address(data->sg);
+ u32 dma_end = dma_start + data->sg->length;
+
+ /* Test whether we ended up moving more data than
+ * was originally requested. */
+
+ if (dma_pos <= dma_end)
+ return;
+
+ printk(KERN_ERR "%s: dma overrun, dma %08x, req %08x..%08x\n",
+ mmc_hostname(host->mmc), dma_pos,
+ dma_start, dma_end);
+}
+
static void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_data *data;
@@ -744,6 +766,8 @@ static void sdhci_finish_data(struct sdhci_host *host)
if (host->flags & SDHCI_USE_ADMA)
sdhci_adma_table_post(host, data);
else {
+ shdci_check_dma_overrun(host, data);
+
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
data->sg_len, (data->flags & MMC_DATA_READ) ?
DMA_FROM_DEVICE : DMA_TO_DEVICE);
@@ -883,13 +907,18 @@ static void sdhci_finish_command(struct sdhci_host *host)
static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
{
+ if (clock == host->clock)
+ return;
+
+ host->ops->change_clock(host, clock);
+}
+
+void sdhci_change_clock(struct sdhci_host *host, unsigned int clock)
+{
int div;
u16 clk;
unsigned long timeout;
- if (clock == host->clock)
- return;
-
writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
if (clock == 0)
@@ -926,6 +955,8 @@ out:
host->clock = clock;
}
+EXPORT_SYMBOL_GPL(sdhci_set_clock);
+
static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
{
u8 pwr;
@@ -1033,6 +1064,9 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
sdhci_init(host);
}
+ if (host->ops->set_ios)
+ host->ops->set_ios(host, ios);
+
sdhci_set_clock(host, ios->clock);
if (ios->power_mode == MMC_POWER_OFF)
@@ -1283,11 +1317,24 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
* controllers.
*/
if (host->cmd->flags & MMC_RSP_BUSY) {
+ u32 present;
+
if (host->cmd->data)
DBG("Cannot wait for busy signal when also "
"doing a data transfer");
- else
+ else if (!(host->quirks & SDHCI_QUIRK_NO_TCIRQ_ON_NOT_BUSY))
return;
+
+ /* The Samsung SDHCI does not seem to provide an INT_DATA_END
+ * when the system goes non-busy, so check the state of the
+ * transfer by reading SDHCI_PRESENT_STATE to see if the
+ * controller is ready
+ */
+
+ present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
+ DBG("busy? present %08x, intstat %08x\n", present, intmask);
+
+ /* fall through and take the SDHCI_INT_RESPONSE */
}
if (intmask & SDHCI_INT_RESPONSE)
@@ -1604,17 +1651,23 @@ int sdhci_add_host(struct sdhci_host *host)
mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
}
- host->max_clk =
- (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
+ if (host->ops->get_max_clock)
+ host->max_clk = host->ops->get_max_clock(host);
+ else {
+ host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
+ host->max_clk *= 1000000;
+ }
if (host->max_clk == 0) {
printk(KERN_ERR "%s: Hardware doesn't specify base clock "
"frequency.\n", mmc_hostname(mmc));
return -ENODEV;
}
- host->max_clk *= 1000000;
- host->timeout_clk =
- (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
+ if (host->ops->get_timeout_clock)
+ host->timeout_clk = host->ops->get_timeout_clock(host);
+ else
+ host->timeout_clk =
+ (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
if (host->timeout_clk == 0) {
printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
"frequency.\n", mmc_hostname(mmc));
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 31f4b1528e7..ad4b2e29b38 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -57,6 +57,7 @@
#define SDHCI_DATA_AVAILABLE 0x00000800
#define SDHCI_CARD_PRESENT 0x00010000
#define SDHCI_WRITE_PROTECT 0x00080000
+#define SDHCI_DATA_BIT(x) (1 << ((x) + 20))
#define SDHCI_HOST_CONTROL 0x28
#define SDHCI_CTRL_LED 0x01
@@ -210,6 +211,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
/* Controller supports high speed but doesn't have the caps bit set */
#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_TCIRQ_ON_NOT_BUSY (1<<15)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
@@ -267,6 +270,14 @@ struct sdhci_host {
struct sdhci_ops {
int (*enable_dma)(struct sdhci_host *host);
+ unsigned int (*get_max_clock)(struct sdhci_host *host);
+ unsigned int (*get_timeout_clock)(struct sdhci_host *host);
+
+ void (*change_clock)(struct sdhci_host *host,
+ unsigned int clock);
+
+ void (*set_ios)(struct sdhci_host *host,
+ struct mmc_ios *ios);
};
@@ -274,6 +285,8 @@ extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
size_t priv_size);
extern void sdhci_free_host(struct sdhci_host *host);
+extern void sdhci_change_clock(struct sdhci_host *host, unsigned int clock);
+
static inline void *sdhci_priv(struct sdhci_host *host)
{
return (void *)host->private;
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-09 22:03:59 +0000