diff options
Diffstat (limited to 'drivers/mtd/maps/esb2rom.c')
| -rw-r--r-- | drivers/mtd/maps/esb2rom.c | 450 |
1 files changed, 450 insertions, 0 deletions
diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c new file mode 100644 index 00000000000..a9d808a617c --- /dev/null +++ b/drivers/mtd/maps/esb2rom.c @@ -0,0 +1,450 @@ +/* + * esb2rom.c + * + * Normal mappings of flash chips in physical memory + * through the Intel ESB2 Southbridge. + * + * This was derived from ichxrom.c in May 2006 by + * Lew Glendenning <lglendenning@lnxi.com> + * + * Eric Biederman, of course, was a major help in this effort. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/io.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/cfi.h> +#include <linux/mtd/flashchip.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/list.h> + +#define MOD_NAME KBUILD_BASENAME + +#define ADDRESS_NAME_LEN 18 + +#define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */ + +#define BIOS_CNTL 0xDC +#define BIOS_LOCK_ENABLE 0x02 +#define BIOS_WRITE_ENABLE 0x01 + +/* This became a 16-bit register, and EN2 has disappeared */ +#define FWH_DEC_EN1 0xD8 +#define FWH_F8_EN 0x8000 +#define FWH_F0_EN 0x4000 +#define FWH_E8_EN 0x2000 +#define FWH_E0_EN 0x1000 +#define FWH_D8_EN 0x0800 +#define FWH_D0_EN 0x0400 +#define FWH_C8_EN 0x0200 +#define FWH_C0_EN 0x0100 +#define FWH_LEGACY_F_EN 0x0080 +#define FWH_LEGACY_E_EN 0x0040 +/* reserved 0x0020 and 0x0010 */ +#define FWH_70_EN 0x0008 +#define FWH_60_EN 0x0004 +#define FWH_50_EN 0x0002 +#define FWH_40_EN 0x0001 + +/* these are 32-bit values */ +#define FWH_SEL1 0xD0 +#define FWH_SEL2 0xD4 + +#define FWH_8MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \ + FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \ + FWH_70_EN | FWH_60_EN | FWH_50_EN | FWH_40_EN) + +#define FWH_7MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \ + FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \ + FWH_70_EN | FWH_60_EN | FWH_50_EN) + +#define FWH_6MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \ + FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \ + FWH_70_EN | FWH_60_EN) + +#define FWH_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \ + FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \ + FWH_70_EN) + +#define FWH_4MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \ + FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN) + +#define FWH_3_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \ + FWH_D8_EN | FWH_D0_EN | FWH_C8_EN) + +#define FWH_3MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \ + FWH_D8_EN | FWH_D0_EN) + +#define FWH_2_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \ + FWH_D8_EN) + +#define FWH_2MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN) + +#define FWH_1_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN) + +#define FWH_1MiB (FWH_F8_EN | FWH_F0_EN) + +#define FWH_0_5MiB (FWH_F8_EN) + + +struct esb2rom_window { + void __iomem* virt; + unsigned long phys; + unsigned long size; + struct list_head maps; + struct resource rsrc; + struct pci_dev *pdev; +}; + +struct esb2rom_map_info { + struct list_head list; + struct map_info map; + struct mtd_info *mtd; + struct resource rsrc; + char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN]; +}; + +static struct esb2rom_window esb2rom_window = { + .maps = LIST_HEAD_INIT(esb2rom_window.maps), +}; + +static void esb2rom_cleanup(struct esb2rom_window *window) +{ + struct esb2rom_map_info *map, *scratch; + u8 byte; + + /* Disable writes through the rom window */ + pci_read_config_byte(window->pdev, BIOS_CNTL, &byte); + pci_write_config_byte(window->pdev, BIOS_CNTL, + byte & ~BIOS_WRITE_ENABLE); + + /* Free all of the mtd devices */ + list_for_each_entry_safe(map, scratch, &window->maps, list) { + if (map->rsrc.parent) + release_resource(&map->rsrc); + del_mtd_device(map->mtd); + map_destroy(map->mtd); + list_del(&map->list); + kfree(map); + } + if (window->rsrc.parent) + release_resource(&window->rsrc); + if (window->virt) { + iounmap(window->virt); + window->virt = NULL; + window->phys = 0; + window->size = 0; + } + pci_dev_put(window->pdev); +} + +static int __devinit esb2rom_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL }; + struct esb2rom_window *window = &esb2rom_window; + struct esb2rom_map_info *map = NULL; + unsigned long map_top; + u8 byte; + u16 word; + + /* For now I just handle the ecb2 and I assume there + * are not a lot of resources up at the top of the address + * space. It is possible to handle other devices in the + * top 16MiB but it is very painful. Also since + * you can only really attach a FWH to an ICHX there + * a number of simplifications you can make. + * + * Also you can page firmware hubs if an 8MiB window isn't enough + * but don't currently handle that case either. + */ + window->pdev = pci_dev_get(pdev); + + /* RLG: experiment 2. Force the window registers to the widest values */ + +/* + pci_read_config_word(pdev, FWH_DEC_EN1, &word); + printk(KERN_DEBUG "Original FWH_DEC_EN1 : %x\n", word); + pci_write_config_byte(pdev, FWH_DEC_EN1, 0xff); + pci_read_config_byte(pdev, FWH_DEC_EN1, &byte); + printk(KERN_DEBUG "New FWH_DEC_EN1 : %x\n", byte); + + pci_read_config_byte(pdev, FWH_DEC_EN2, &byte); + printk(KERN_DEBUG "Original FWH_DEC_EN2 : %x\n", byte); + pci_write_config_byte(pdev, FWH_DEC_EN2, 0x0f); + pci_read_config_byte(pdev, FWH_DEC_EN2, &byte); + printk(KERN_DEBUG "New FWH_DEC_EN2 : %x\n", byte); +*/ + + /* Find a region continuous to the end of the ROM window */ + window->phys = 0; + pci_read_config_word(pdev, FWH_DEC_EN1, &word); + printk(KERN_DEBUG "pci_read_config_byte : %x\n", word); + + if ((word & FWH_8MiB) == FWH_8MiB) + window->phys = 0xff400000; + else if ((word & FWH_7MiB) == FWH_7MiB) + window->phys = 0xff500000; + else if ((word & FWH_6MiB) == FWH_6MiB) + window->phys = 0xff600000; + else if ((word & FWH_5MiB) == FWH_5MiB) + window->phys = 0xFF700000; + else if ((word & FWH_4MiB) == FWH_4MiB) + window->phys = 0xffc00000; + else if ((word & FWH_3_5MiB) == FWH_3_5MiB) + window->phys = 0xffc80000; + else if ((word & FWH_3MiB) == FWH_3MiB) + window->phys = 0xffd00000; + else if ((word & FWH_2_5MiB) == FWH_2_5MiB) + window->phys = 0xffd80000; + else if ((word & FWH_2MiB) == FWH_2MiB) + window->phys = 0xffe00000; + else if ((word & FWH_1_5MiB) == FWH_1_5MiB) + window->phys = 0xffe80000; + else if ((word & FWH_1MiB) == FWH_1MiB) + window->phys = 0xfff00000; + else if ((word & FWH_0_5MiB) == FWH_0_5MiB) + window->phys = 0xfff80000; + + /* reserved 0x0020 and 0x0010 */ + window->phys -= 0x400000UL; + window->size = (0xffffffffUL - window->phys) + 1UL; + + /* Enable writes through the rom window */ + pci_read_config_byte(pdev, BIOS_CNTL, &byte); + if (!(byte & BIOS_WRITE_ENABLE) && (byte & (BIOS_LOCK_ENABLE))) { + /* The BIOS will generate an error if I enable + * this device, so don't even try. + */ + printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n"); + goto out; + } + pci_write_config_byte(pdev, BIOS_CNTL, byte | BIOS_WRITE_ENABLE); + + /* + * Try to reserve the window mem region. If this fails then + * it is likely due to the window being "reseved" by the BIOS. + */ + window->rsrc.name = MOD_NAME; + window->rsrc.start = window->phys; + window->rsrc.end = window->phys + window->size - 1; + window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; + if (request_resource(&iomem_resource, &window->rsrc)) { + window->rsrc.parent = NULL; + printk(KERN_DEBUG MOD_NAME + ": %s(): Unable to register resource" + " 0x%.08llx-0x%.08llx - kernel bug?\n", + __func__, + (unsigned long long)window->rsrc.start, + (unsigned long long)window->rsrc.end); + } + + /* Map the firmware hub into my address space. */ + window->virt = ioremap_nocache(window->phys, window->size); + if (!window->virt) { + printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n", + window->phys, window->size); + goto out; + } + + /* Get the first address to look for an rom chip at */ + map_top = window->phys; + if ((window->phys & 0x3fffff) != 0) { + /* if not aligned on 4MiB, look 4MiB lower in address space */ + map_top = window->phys + 0x400000; + } +#if 1 + /* The probe sequence run over the firmware hub lock + * registers sets them to 0x7 (no access). + * (Insane hardware design, but most copied Intel's.) + * ==> Probe at most the last 4M of the address space. + */ + if (map_top < 0xffc00000) + map_top = 0xffc00000; +#endif + /* Loop through and look for rom chips */ + while ((map_top - 1) < 0xffffffffUL) { + struct cfi_private *cfi; + unsigned long offset; + int i; + + if (!map) + map = kmalloc(sizeof(*map), GFP_KERNEL); + if (!map) { + printk(KERN_ERR MOD_NAME ": kmalloc failed"); + goto out; + } + memset(map, 0, sizeof(*map)); + INIT_LIST_HEAD(&map->list); + map->map.name = map->map_name; + map->map.phys = map_top; + offset = map_top - window->phys; + map->map.virt = (void __iomem *) + (((unsigned long)(window->virt)) + offset); + map->map.size = 0xffffffffUL - map_top + 1UL; + /* Set the name of the map to the address I am trying */ + sprintf(map->map_name, "%s @%08lx", + MOD_NAME, map->map.phys); + + /* Firmware hubs only use vpp when being programmed + * in a factory setting. So in-place programming + * needs to use a different method. + */ + for(map->map.bankwidth = 32; map->map.bankwidth; + map->map.bankwidth >>= 1) { + char **probe_type; + /* Skip bankwidths that are not supported */ + if (!map_bankwidth_supported(map->map.bankwidth)) + continue; + + /* Setup the map methods */ + simple_map_init(&map->map); + + /* Try all of the probe methods */ + probe_type = rom_probe_types; + for(; *probe_type; probe_type++) { + map->mtd = do_map_probe(*probe_type, &map->map); + if (map->mtd) + goto found; + } + } + map_top += ROM_PROBE_STEP_SIZE; + continue; + found: + /* Trim the size if we are larger than the map */ + if (map->mtd->size > map->map.size) { + printk(KERN_WARNING MOD_NAME + " rom(%u) larger than window(%lu). fixing...\n", + map->mtd->size, map->map.size); + map->mtd->size = map->map.size; + } + if (window->rsrc.parent) { + /* + * Registering the MTD device in iomem may not be possible + * if there is a BIOS "reserved" and BUSY range. If this + * fails then continue anyway. + */ + map->rsrc.name = map->map_name; + map->rsrc.start = map->map.phys; + map->rsrc.end = map->map.phys + map->mtd->size - 1; + map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; + if (request_resource(&window->rsrc, &map->rsrc)) { + printk(KERN_ERR MOD_NAME + ": cannot reserve MTD resource\n"); + map->rsrc.parent = NULL; + } + } + + /* Make the whole region visible in the map */ + map->map.virt = window->virt; + map->map.phys = window->phys; + cfi = map->map.fldrv_priv; + for(i = 0; i < cfi->numchips; i++) + cfi->chips[i].start += offset; + + /* Now that the mtd devices is complete claim and export it */ + map->mtd->owner = THIS_MODULE; + if (add_mtd_device(map->mtd)) { + map_destroy(map->mtd); + map->mtd = NULL; + goto out; + } + + /* Calculate the new value of map_top */ + map_top += map->mtd->size; + + /* File away the map structure */ + list_add(&map->list, &window->maps); + map = NULL; + } + + out: + /* Free any left over map structures */ + kfree(map); + + /* See if I have any map structures */ + if (list_empty(&window->maps)) { + esb2rom_cleanup(window); + return -ENODEV; + } + return 0; +} + +static void __devexit esb2rom_remove_one (struct pci_dev *pdev) +{ + struct esb2rom_window *window = &esb2rom_window; + esb2rom_cleanup(window); +} + +static struct pci_device_id esb2rom_pci_tbl[] __devinitdata = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, + PCI_ANY_ID, PCI_ANY_ID, }, + { 0, }, +}; + +#if 0 +MODULE_DEVICE_TABLE(pci, esb2rom_pci_tbl); + +static struct pci_driver esb2rom_driver = { + .name = MOD_NAME, + .id_table = esb2rom_pci_tbl, + .probe = esb2rom_init_one, + .remove = esb2rom_remove_one, +}; +#endif + +static int __init init_esb2rom(void) +{ + struct pci_dev *pdev; + struct pci_device_id *id; + int retVal; + + pdev = NULL; + for (id = esb2rom_pci_tbl; id->vendor; id++) { + printk(KERN_DEBUG "device id = %x\n", id->device); + pdev = pci_get_device(id->vendor, id->device, NULL); + if (pdev) { + printk(KERN_DEBUG "matched device = %x\n", id->device); + break; + } + } + if (pdev) { + printk(KERN_DEBUG "matched device id %x\n", id->device); + retVal = esb2rom_init_one(pdev, &esb2rom_pci_tbl[0]); + pci_dev_put(pdev); + printk(KERN_DEBUG "retVal = %d\n", retVal); + return retVal; + } + return -ENXIO; +#if 0 + return pci_register_driver(&esb2rom_driver); +#endif +} + +static void __exit cleanup_esb2rom(void) +{ + esb2rom_remove_one(esb2rom_window.pdev); +} + +module_init(init_esb2rom); +module_exit(cleanup_esb2rom); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Lew Glendenning <lglendenning@lnxi.com>"); +MODULE_DESCRIPTION("MTD map driver for BIOS chips on the ESB2 southbridge"); |