aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/maps
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/maps')
-rw-r--r--drivers/mtd/maps/Kconfig71
-rw-r--r--drivers/mtd/maps/Makefile4
-rw-r--r--drivers/mtd/maps/amd76xrom.c34
-rw-r--r--drivers/mtd/maps/bast-flash.c2
-rw-r--r--drivers/mtd/maps/ceiva.c3
-rw-r--r--drivers/mtd/maps/ck804xrom.c356
-rw-r--r--drivers/mtd/maps/cstm_mips_ixx.c283
-rw-r--r--drivers/mtd/maps/esb2rom.c450
-rw-r--r--drivers/mtd/maps/integrator-flash.c4
-rw-r--r--drivers/mtd/maps/nettel.c5
-rw-r--r--drivers/mtd/maps/omap_nor.c4
-rw-r--r--drivers/mtd/maps/pcmciamtd.c3
-rw-r--r--drivers/mtd/maps/physmap.c5
-rw-r--r--drivers/mtd/maps/physmap_of.c255
-rw-r--r--drivers/mtd/maps/plat-ram.c3
-rw-r--r--drivers/mtd/maps/sa1100-flash.c4
-rw-r--r--drivers/mtd/maps/tqm834x.c8
-rw-r--r--drivers/mtd/maps/tqm8xxl.c3
18 files changed, 1134 insertions, 363 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index d132ed571f1..f457315579d 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -60,6 +60,15 @@ config MTD_PHYSMAP_BANKWIDTH
Ignore this option if you use run-time physmap configuration
(i.e., run-time calling physmap_configure()).
+config MTD_PHYSMAP_OF
+ tristate "Flash device in physical memory map based on OF descirption"
+ depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
+ help
+ This provides a 'mapping' driver which allows the NOR Flash and
+ ROM driver code to communicate with chips which are mapped
+ physically into the CPU's memory. The mapping description here is
+ taken from OF device tree.
+
config MTD_SUN_UFLASH
tristate "Sun Microsystems userflash support"
depends on SPARC && MTD_CFI
@@ -184,6 +193,24 @@ config MTD_ICHXROM
BE VERY CAREFUL.
+config MTD_ESB2ROM
+ tristate "BIOS flash chip on Intel ESB Controller Hub 2"
+ depends on X86 && MTD_JEDECPROBE && PCI
+ help
+ Support for treating the BIOS flash chip on ESB2 motherboards
+ as an MTD device - with this you can reprogram your BIOS.
+
+ BE VERY CAREFUL.
+
+config MTD_CK804XROM
+ tristate "BIOS flash chip on Nvidia CK804"
+ depends on X86 && MTD_JEDECPROBE
+ help
+ Support for treating the BIOS flash chip on nvidia motherboards
+ as an MTD device - with this you can reprogram your BIOS.
+
+ BE VERY CAREFUL.
+
config MTD_SCB2_FLASH
tristate "BIOS flash chip on Intel SCB2 boards"
depends on X86 && MTD_JEDECPROBE
@@ -355,50 +382,6 @@ config MTD_TQM834x
TQ Components TQM834x boards. If you have one of these boards
and would like to use the flash chips on it, say 'Y'.
-config MTD_CSTM_MIPS_IXX
- tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
- depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
- help
- This provides a mapping driver for the Integrated Technology
- Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR
- Reference Board. It provides the necessary addressing, length,
- buswidth, vpp code and addition setup of the flash device for
- these boards. In addition, this mapping driver can be used for
- other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/
- LEN/BUSWIDTH parameters. This mapping will provide one mtd device
- using one partition. The start address can be offset from the
- beginning of flash and the len can be less than the total flash
- device size to allow a window into the flash. Both CFI and JEDEC
- probes are called.
-
-config MTD_CSTM_MIPS_IXX_START
- hex "Physical start address of flash mapping"
- depends on MTD_CSTM_MIPS_IXX
- default "0x8000000"
- help
- This is the physical memory location that the MTD driver will
- use for the flash chips on your particular target board.
- Refer to the memory map which should hopefully be in the
- documentation for your board.
-
-config MTD_CSTM_MIPS_IXX_LEN
- hex "Physical length of flash mapping"
- depends on MTD_CSTM_MIPS_IXX
- default "0x4000000"
- help
- This is the total length that the MTD driver will use for the
- flash chips on your particular board. Refer to the memory
- map which should hopefully be in the documentation for your
- board.
-
-config MTD_CSTM_MIPS_IXX_BUSWIDTH
- int "Bus width in octets"
- depends on MTD_CSTM_MIPS_IXX
- default "2"
- help
- This is the total bus width of the mapping of the flash chips
- on your particular board.
-
config MTD_OCELOT
tristate "Momenco Ocelot boot flash device"
depends on MIPS && MOMENCO_OCELOT
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 191c1928bbe..071d0bf922b 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -12,12 +12,13 @@ obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
obj-$(CONFIG_MTD_BAST) += bast-flash.o
obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
-obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o
obj-$(CONFIG_MTD_DC21285) += dc21285.o
obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o
obj-$(CONFIG_MTD_L440GX) += l440gx.o
obj-$(CONFIG_MTD_AMD76XROM) += amd76xrom.o
+obj-$(CONFIG_MTD_ESB2ROM) += esb2rom.o
obj-$(CONFIG_MTD_ICHXROM) += ichxrom.o
+obj-$(CONFIG_MTD_CK804XROM) += ck804xrom.o
obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o
obj-$(CONFIG_MTD_LUBBOCK) += lubbock-flash.o
obj-$(CONFIG_MTD_MAINSTONE) += mainstone-flash.o
@@ -25,6 +26,7 @@ obj-$(CONFIG_MTD_MBX860) += mbx860.o
obj-$(CONFIG_MTD_CEIVA) += ceiva.o
obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o
obj-$(CONFIG_MTD_PHYSMAP) += physmap.o
+obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
obj-$(CONFIG_MTD_PNC2000) += pnc2000.o
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 797caffb20b..78b671172bb 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -7,6 +7,7 @@
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
@@ -44,6 +45,23 @@ struct amd76xrom_map_info {
char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
};
+/* The 2 bits controlling the window size are often set to allow reading
+ * the BIOS, but too small to allow writing, since the lock registers are
+ * 4MiB lower in the address space than the data.
+ *
+ * This is intended to prevent flashing the bios, perhaps accidentally.
+ *
+ * This parameter allows the normal driver to over-ride the BIOS settings.
+ *
+ * The bits are 6 and 7. If both bits are set, it is a 5MiB window.
+ * If only the 7 Bit is set, it is a 4MiB window. Otherwise, a
+ * 64KiB window.
+ *
+ */
+static uint win_size_bits;
+module_param(win_size_bits, uint, 0);
+MODULE_PARM_DESC(win_size_bits, "ROM window size bits override for 0x43 byte, normally set by BIOS.");
+
static struct amd76xrom_window amd76xrom_window = {
.maps = LIST_HEAD_INIT(amd76xrom_window.maps),
};
@@ -95,6 +113,16 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
/* Remember the pci dev I find the window in - already have a ref */
window->pdev = pdev;
+ /* Enable the selected rom window. This is often incorrectly
+ * set up by the BIOS, and the 4MiB offset for the lock registers
+ * requires the full 5MiB of window space.
+ *
+ * This 'write, then read' approach leaves the bits for
+ * other uses of the hardware info.
+ */
+ pci_read_config_byte(pdev, 0x43, &byte);
+ pci_write_config_byte(pdev, 0x43, byte | win_size_bits );
+
/* Assume the rom window is properly setup, and find it's size */
pci_read_config_byte(pdev, 0x43, &byte);
if ((byte & ((1<<7)|(1<<6))) == ((1<<7)|(1<<6))) {
@@ -129,12 +157,6 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
(unsigned long long)window->rsrc.end);
}
-#if 0
-
- /* Enable the selected rom window */
- pci_read_config_byte(pdev, 0x43, &byte);
- pci_write_config_byte(pdev, 0x43, byte | rwindow->segen_bits);
-#endif
/* Enable writes through the rom window */
pci_read_config_byte(pdev, 0x40, &byte);
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
index e074bb6787d..fc3b2672d1e 100644
--- a/drivers/mtd/maps/bast-flash.c
+++ b/drivers/mtd/maps/bast-flash.c
@@ -131,7 +131,7 @@ static int bast_flash_probe(struct platform_device *pdev)
info->map.phys = res->start;
info->map.size = res->end - res->start + 1;
- info->map.name = pdev->dev.bus_id;
+ info->map.name = pdev->dev.bus_id;
info->map.bankwidth = 2;
if (info->map.size > AREA_MAXSIZE)
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index 0402c21e291..629e6e2641a 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -122,10 +122,9 @@ static int __init clps_setup_mtd(struct clps_info *clps, int nr, struct mtd_info
/*
* Allocate the map_info structs in one go.
*/
- maps = kmalloc(sizeof(struct map_info) * nr, GFP_KERNEL);
+ maps = kzalloc(sizeof(struct map_info) * nr, GFP_KERNEL);
if (!maps)
return -ENOMEM;
- memset(maps, 0, sizeof(struct map_info) * nr);
/*
* Claim and then map the memory regions.
*/
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
new file mode 100644
index 00000000000..238d42e88ec
--- /dev/null
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -0,0 +1,356 @@
+/*
+ * ck804xrom.c
+ *
+ * Normal mappings of chips in physical memory
+ *
+ * Dave Olsen <dolsen@lnxi.com>
+ * Ryan Jackson <rjackson@lnxi.com>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/list.h>
+
+
+#define MOD_NAME KBUILD_BASENAME
+
+#define ADDRESS_NAME_LEN 18
+
+#define ROM_PROBE_STEP_SIZE (64*1024)
+
+struct ck804xrom_window {
+ void __iomem *virt;
+ unsigned long phys;
+ unsigned long size;
+ struct list_head maps;
+ struct resource rsrc;
+ struct pci_dev *pdev;
+};
+
+struct ck804xrom_map_info {
+ struct list_head list;
+ struct map_info map;
+ struct mtd_info *mtd;
+ struct resource rsrc;
+ char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
+};
+
+
+/* The 2 bits controlling the window size are often set to allow reading
+ * the BIOS, but too small to allow writing, since the lock registers are
+ * 4MiB lower in the address space than the data.
+ *
+ * This is intended to prevent flashing the bios, perhaps accidentally.
+ *
+ * This parameter allows the normal driver to override the BIOS settings.
+ *
+ * The bits are 6 and 7. If both bits are set, it is a 5MiB window.
+ * If only the 7 Bit is set, it is a 4MiB window. Otherwise, a
+ * 64KiB window.
+ *
+ */
+static uint win_size_bits = 0;
+module_param(win_size_bits, uint, 0);
+MODULE_PARM_DESC(win_size_bits, "ROM window size bits override for 0x88 byte, normally set by BIOS.");
+
+static struct ck804xrom_window ck804xrom_window = {
+ .maps = LIST_HEAD_INIT(ck804xrom_window.maps),
+};
+
+static void ck804xrom_cleanup(struct ck804xrom_window *window)
+{
+ struct ck804xrom_map_info *map, *scratch;
+ u8 byte;
+
+ if (window->pdev) {
+ /* Disable writes through the rom window */
+ pci_read_config_byte(window->pdev, 0x6d, &byte);
+ pci_write_config_byte(window->pdev, 0x6d, byte & ~1);
+ }
+
+ /* Free all of the mtd devices */
+ list_for_each_entry_safe(map, scratch, &window->maps, list) {
+ if (map->rsrc.parent)
+ release_resource(&map->rsrc);
+
+ del_mtd_device(map->mtd);
+ map_destroy(map->mtd);
+ list_del(&map->list);
+ kfree(map);
+ }
+ if (window->rsrc.parent)
+ release_resource(&window->rsrc);
+
+ if (window->virt) {
+ iounmap(window->virt);
+ window->virt = NULL;
+ window->phys = 0;
+ window->size = 0;
+ }
+ pci_dev_put(window->pdev);
+}
+
+
+static int __devinit ck804xrom_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
+ u8 byte;
+ struct ck804xrom_window *window = &ck804xrom_window;
+ struct ck804xrom_map_info *map = NULL;
+ unsigned long map_top;
+
+ /* Remember the pci dev I find the window in */
+ window->pdev = pci_dev_get(pdev);
+
+ /* Enable the selected rom window. This is often incorrectly
+ * set up by the BIOS, and the 4MiB offset for the lock registers
+ * requires the full 5MiB of window space.
+ *
+ * This 'write, then read' approach leaves the bits for
+ * other uses of the hardware info.
+ */
+ pci_read_config_byte(pdev, 0x88, &byte);
+ pci_write_config_byte(pdev, 0x88, byte | win_size_bits );
+
+
+ /* Assume the rom window is properly setup, and find it's size */
+ pci_read_config_byte(pdev, 0x88, &byte);
+
+ if ((byte & ((1<<7)|(1<<6))) == ((1<<7)|(1<<6)))
+ window->phys = 0xffb00000; /* 5MiB */
+ else if ((byte & (1<<7)) == (1<<7))
+ window->phys = 0xffc00000; /* 4MiB */
+ else
+ window->phys = 0xffff0000; /* 64KiB */
+
+ window->size = 0xffffffffUL - window->phys + 1UL;
+
+ /*
+ * Try to reserve the window mem region. If this fails then
+ * it is likely due to a fragment of the window being
+ * "reserved" by the BIOS. In the case that the
+ * request_mem_region() fails then once the rom size is
+ * discovered we will try to reserve the unreserved fragment.
+ */
+ window->rsrc.name = MOD_NAME;
+ window->rsrc.start = window->phys;
+ window->rsrc.end = window->phys + window->size - 1;
+ window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&iomem_resource, &window->rsrc)) {
+ window->rsrc.parent = NULL;
+ printk(KERN_ERR MOD_NAME
+ " %s(): Unable to register resource"
+ " 0x%.016llx-0x%.016llx - kernel bug?\n",
+ __func__,
+ (unsigned long long)window->rsrc.start,
+ (unsigned long long)window->rsrc.end);
+ }
+
+
+ /* Enable writes through the rom window */
+ pci_read_config_byte(pdev, 0x6d, &byte);
+ pci_write_config_byte(pdev, 0x6d, byte | 1);
+
+ /* FIXME handle registers 0x80 - 0x8C the bios region locks */
+
+ /* For write accesses caches are useless */
+ window->virt = ioremap_nocache(window->phys, window->size);
+ if (!window->virt) {
+ printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
+ window->phys, window->size);
+ goto out;
+ }
+
+ /* Get the first address to look for a rom chip at */
+ map_top = window->phys;
+#if 1
+ /* The probe sequence run over the firmware hub lock
+ * registers sets them to 0x7 (no access).
+ * Probe at most the last 4MiB of the address space.
+ */
+ if (map_top < 0xffc00000)
+ map_top = 0xffc00000;
+#endif
+ /* Loop through and look for rom chips. Since we don't know the
+ * starting address for each chip, probe every ROM_PROBE_STEP_SIZE
+ * bytes from the starting address of the window.
+ */
+ while((map_top - 1) < 0xffffffffUL) {
+ struct cfi_private *cfi;
+ unsigned long offset;
+ int i;
+
+ if (!map)
+ map = kmalloc(sizeof(*map), GFP_KERNEL);
+
+ if (!map) {
+ printk(KERN_ERR MOD_NAME ": kmalloc failed");
+ goto out;
+ }
+ memset(map, 0, sizeof(*map));
+ INIT_LIST_HEAD(&map->list);
+ map->map.name = map->map_name;
+ map->map.phys = map_top;
+ offset = map_top - window->phys;
+ map->map.virt = (void __iomem *)
+ (((unsigned long)(window->virt)) + offset);
+ map->map.size = 0xffffffffUL - map_top + 1UL;
+ /* Set the name of the map to the address I am trying */
+ sprintf(map->map_name, "%s @%08lx",
+ MOD_NAME, map->map.phys);
+
+ /* There is no generic VPP support */
+ for(map->map.bankwidth = 32; map->map.bankwidth;
+ map->map.bankwidth >>= 1)
+ {
+ char **probe_type;
+ /* Skip bankwidths that are not supported */
+ if (!map_bankwidth_supported(map->map.bankwidth))
+ continue;
+
+ /* Setup the map methods */
+ simple_map_init(&map->map);
+
+ /* Try all of the probe methods */
+ probe_type = rom_probe_types;
+ for(; *probe_type; probe_type++) {
+ map->mtd = do_map_probe(*probe_type, &map->map);
+ if (map->mtd)
+ goto found;
+ }
+ }
+ map_top += ROM_PROBE_STEP_SIZE;
+ continue;
+ found:
+ /* Trim the size if we are larger than the map */
+ if (map->mtd->size > map->map.size) {
+ printk(KERN_WARNING MOD_NAME
+ " rom(%u) larger than window(%lu). fixing...\n",
+ map->mtd->size, map->map.size);
+ map->mtd->size = map->map.size;
+ }
+ if (window->rsrc.parent) {
+ /*
+ * Registering the MTD device in iomem may not be possible
+ * if there is a BIOS "reserved" and BUSY range. If this
+ * fails then continue anyway.
+ */
+ map->rsrc.name = map->map_name;
+ map->rsrc.start = map->map.phys;
+ map->rsrc.end = map->map.phys + map->mtd->size - 1;
+ map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&window->rsrc, &map->rsrc)) {
+ printk(KERN_ERR MOD_NAME
+ ": cannot reserve MTD resource\n");
+ map->rsrc.parent = NULL;
+ }
+ }
+
+ /* Make the whole region visible in the map */
+ map->map.virt = window->virt;
+ map->map.phys = window->phys;
+ cfi = map->map.fldrv_priv;
+ for(i = 0; i < cfi->numchips; i++)
+ cfi->chips[i].start += offset;
+
+ /* Now that the mtd devices is complete claim and export it */
+ map->mtd->owner = THIS_MODULE;
+ if (add_mtd_device(map->mtd)) {
+ map_destroy(map->mtd);
+ map->mtd = NULL;
+ goto out;
+ }
+
+
+ /* Calculate the new value of map_top */
+ map_top += map->mtd->size;
+
+ /* File away the map structure */
+ list_add(&map->list, &window->maps);
+ map = NULL;
+ }
+
+ out:
+ /* Free any left over map structures */
+ if (map)
+ kfree(map);
+
+ /* See if I have any map structures */
+ if (list_empty(&window->maps)) {
+ ck804xrom_cleanup(window);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+
+static void __devexit ck804xrom_remove_one (struct pci_dev *pdev)
+{
+ struct ck804xrom_window *window = &ck804xrom_window;
+
+ ck804xrom_cleanup(window);
+}
+
+static struct pci_device_id ck804xrom_pci_tbl[] = {
+ { PCI_VENDOR_ID_NVIDIA, 0x0051,
+ PCI_ANY_ID, PCI_ANY_ID, }, /* nvidia ck804 */
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, ck804xrom_pci_tbl);
+
+#if 0
+static struct pci_driver ck804xrom_driver = {
+ .name = MOD_NAME,
+ .id_table = ck804xrom_pci_tbl,
+ .probe = ck804xrom_init_one,
+ .remove = ck804xrom_remove_one,
+};
+#endif
+
+static int __init init_ck804xrom(void)
+{
+ struct pci_dev *pdev;
+ struct pci_device_id *id;
+ int retVal;
+ pdev = NULL;
+
+ for(id = ck804xrom_pci_tbl; id->vendor; id++) {
+ pdev = pci_find_device(id->vendor, id->device, NULL);
+ if (pdev)
+ break;
+ }
+ if (pdev) {
+ retVal = ck804xrom_init_one(pdev, &ck804xrom_pci_tbl[0]);
+ pci_dev_put(pdev);
+ return retVal;
+ }
+ return -ENXIO;
+#if 0
+ return pci_module_init(&ck804xrom_driver);
+#endif
+}
+
+static void __exit cleanup_ck804xrom(void)
+{
+ ck804xrom_remove_one(ck804xrom_window.pdev);
+}
+
+module_init(init_ck804xrom);
+module_exit(cleanup_ck804xrom);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>, Dave Olsen <dolsen@lnxi.com>");
+MODULE_DESCRIPTION("MTD map driver for BIOS chips on the Nvidia ck804 southbridge");
+
diff --git a/drivers/mtd/maps/cstm_mips_ixx.c b/drivers/mtd/maps/cstm_mips_ixx.c
deleted file mode 100644
index df2c38ef105..00000000000
--- a/drivers/mtd/maps/cstm_mips_ixx.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * $Id: cstm_mips_ixx.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
- *
- * Mapping of a custom board with both AMD CFI and JEDEC flash in partitions.
- * Config with both CFI and JEDEC device support.
- *
- * Basically physmap.c with the addition of partitions and
- * an array of mapping info to accomodate more than one flash type per board.
- *
- * Copyright 2000 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
-#define CC_GCR 0xB4013818
-#define CC_GPBCR 0xB401380A
-#define CC_GPBDR 0xB4013808
-#define CC_M68K_DEVICE 1
-#define CC_M68K_FUNCTION 6
-#define CC_CONFADDR 0xB8004000
-#define CC_CONFDATA 0xB8004004
-#define CC_FC_FCR 0xB8002004
-#define CC_FC_DCR 0xB8002008
-#define CC_GPACR 0xB4013802
-#define CC_GPAICR 0xB4013804
-#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
-
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
-void cstm_mips_ixx_set_vpp(struct map_info *map,int vpp)
-{
- static DEFINE_SPINLOCK(vpp_lock);
- static int vpp_count = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&vpp_lock, flags);
-
- if (vpp) {
- if (!vpp_count++) {
- __u16 data;
- __u8 data1;
- static u8 first = 1;
-
- // Set GPIO port B pin3 to high
- data = *(__u16 *)(CC_GPBCR);
- data = (data & 0xff0f) | 0x0040;
- *(__u16 *)CC_GPBCR = data;
- *(__u8 *)CC_GPBDR = (*(__u8*)CC_GPBDR) | 0x08;
- if (first) {
- first = 0;
- /* need to have this delay for first
- enabling vpp after powerup */
- udelay(40);
- }
- }
- } else {
- if (!--vpp_count) {
- __u16 data;
-
- // Set GPIO port B pin3 to high
- data = *(__u16 *)(CC_GPBCR);
- data = (data & 0xff3f) | 0x0040;
- *(__u16 *)CC_GPBCR = data;
- *(__u8 *)CC_GPBDR = (*(__u8*)CC_GPBDR) & 0xf7;
- }
- }
- spin_unlock_irqrestore(&vpp_lock, flags);
-}
-#endif
-
-/* board and partition description */
-
-#define MAX_PHYSMAP_PARTITIONS 8
-struct cstm_mips_ixx_info {
- char *name;
- unsigned long window_addr;
- unsigned long window_size;
- int bankwidth;
- int num_partitions;
-};
-
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
-#define PHYSMAP_NUMBER 1 // number of board desc structs needed, one per contiguous flash type
-const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] =
-{
- { // 28F128J3A in 2x16 configuration
- "big flash", // name
- 0x08000000, // window_addr
- 0x02000000, // window_size
- 4, // bankwidth
- 1, // num_partitions
- }
-
-};
-static struct mtd_partition cstm_mips_ixx_partitions[PHYSMAP_NUMBER][MAX_PHYSMAP_PARTITIONS] = {
-{ // 28F128J3A in 2x16 configuration
- {
- .name = "main partition ",
- .size = 0x02000000, // 128 x 2 x 128k byte sectors
- .offset = 0,
- },
-},
-};
-#else /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
-#define PHYSMAP_NUMBER 1 // number of board desc structs needed, one per contiguous flash type
-const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] =
-{
- {
- "MTD flash", // name
- CONFIG_MTD_CSTM_MIPS_IXX_START, // window_addr
- CONFIG_MTD_CSTM_MIPS_IXX_LEN, // window_size
- CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH, // bankwidth
- 1, // num_partitions
- },
-
-};
-static struct mtd_partition cstm_mips_ixx_partitions[PHYSMAP_NUMBER][MAX_PHYSMAP_PARTITIONS] = {
-{
- {
- .name = "main partition",
- .size = CONFIG_MTD_CSTM_MIPS_IXX_LEN,
- .offset = 0,
- },
-},
-};
-#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
-
-struct map_info cstm_mips_ixx_map[PHYSMAP_NUMBER];
-
-int __init init_cstm_mips_ixx(void)
-{
- int i;
- int jedec;
- struct mtd_info *mymtd;
- struct mtd_partition *parts;
-
- /* Initialize mapping */
- for (i=0;i<PHYSMAP_NUMBER;i++) {
- printk(KERN_NOTICE "cstm_mips_ixx flash device: 0x%lx at 0x%lx\n",
- cstm_mips_ixx_board_desc[i].window_size, cstm_mips_ixx_board_desc[i].window_addr);
-
-
- cstm_mips_ixx_map[i].phys = cstm_mips_ixx_board_desc[i].window_addr;
- cstm_mips_ixx_map[i].virt = ioremap(cstm_mips_ixx_board_desc[i].window_addr, cstm_mips_ixx_board_desc[i].window_size);
- if (!cstm_mips_ixx_map[i].virt) {
- int j = 0;
- printk(KERN_WARNING "Failed to ioremap\n");
- for (j = 0; j < i; j++) {
- if (cstm_mips_ixx_map[j].virt) {
- iounmap(cstm_mips_ixx_map[j].virt);
- cstm_mips_ixx_map[j].virt = NULL;
- }
- }
- return -EIO;
- }
- cstm_mips_ixx_map[i].name = cstm_mips_ixx_board_desc[i].name;
- cstm_mips_ixx_map[i].size = cstm_mips_ixx_board_desc[i].window_size;
- cstm_mips_ixx_map[i].bankwidth = cstm_mips_ixx_board_desc[i].bankwidth;
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
- cstm_mips_ixx_map[i].set_vpp = cstm_mips_ixx_set_vpp;
-#endif
- simple_map_init(&cstm_mips_ixx_map[i]);
- //printk(KERN_NOTICE "cstm_mips_ixx: ioremap is %x\n",(unsigned int)(cstm_mips_ixx_map[i].virt));
- }
-
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
- setup_ITE_IVR_flash();
-#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
-
- for (i=0;i<PHYSMAP_NUMBER;i++) {
- parts = &cstm_mips_ixx_partitions[i][0];
- jedec = 0;
- mymtd = (struct mtd_info *)do_map_probe("cfi_probe", &cstm_mips_ixx_map[i]);
- //printk(KERN_NOTICE "phymap %d cfi_probe: mymtd is %x\n",i,(unsigned int)mymtd);
- if (!mymtd) {
- jedec = 1;
- mymtd = (struct mtd_info *)do_map_probe("jedec", &cstm_mips_ixx_map[i]);
- printk(KERN_NOTICE "cstm_mips_ixx %d jedec: mymtd is %x\n",i,(unsigned int)mymtd);
- }
- if (mymtd) {
- mymtd->owner = THIS_MODULE;
-
- cstm_mips_ixx_map[i].map_priv_2 = (unsigned long)mymtd;
- add_mtd_partitions(mymtd, parts, cstm_mips_ixx_board_desc[i].num_partitions);
- }
- else {
- for (i = 0; i < PHYSMAP_NUMBER; i++) {
- if (cstm_mips_ixx_map[i].virt) {
- iounmap(cstm_mips_ixx_map[i].virt);
- cstm_mips_ixx_map[i].virt = NULL;
- }
- }
- return -ENXIO;
- }
- }
- return 0;
-}
-
-static void __exit cleanup_cstm_mips_ixx(void)
-{
- int i;
- struct mtd_info *mymtd;
-
- for (i=0;i<PHYSMAP_NUMBER;i++) {
- mymtd = (struct mtd_info *)cstm_mips_ixx_map[i].map_priv_2;
- if (mymtd) {
- del_mtd_partitions(mymtd);
- map_destroy(mymtd);
- }
- if (cstm_mips_ixx_map[i].virt) {
- iounmap((void *)cstm_mips_ixx_map[i].virt);
- cstm_mips_ixx_map[i].virt = 0;
- }
- }
-}
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
-void PCISetULongByOffset(__u32 DevNumber, __u32 FuncNumber, __u32 Offset, __u32 data)
-{
- __u32 offset;
-
- offset = ( unsigned long )( 0x80000000 | ( DevNumber << 11 ) + ( FuncNumber << 8 ) + Offset) ;
-
- *(__u32 *)CC_CONFADDR = offset;
- *(__u32 *)CC_CONFDATA = data;
-}
-void setup_ITE_IVR_flash()
-{
- __u32 size, base;
-
- size = 0x0e000000; // 32MiB
- base = (0x08000000) >> 8 >>1; // Bug: we must shift one more bit
-
- /* need to set ITE flash to 32 bits instead of default 8 */
-#ifdef CONFIG_MIPS_IVR
- *(__u32 *)CC_FC_FCR = 0x55;
- *(__u32 *)CC_GPACR = 0xfffc;
-#else
- *(__u32 *)CC_FC_FCR = 0x77;
-#endif
- /* turn bursting off */
- *(__u32 *)CC_FC_DCR = 0x0;
-
- /* setup for one chip 4 byte PCI access */
- PCISetULongByOffset(CC_M68K_DEVICE, CC_M68K_FUNCTION, 0x60, size | base);
- PCISetULongByOffset(CC_M68K_DEVICE, CC_M68K_FUNCTION, 0x64, 0x02);
-}
-#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
-
-module_init(init_cstm_mips_ixx);
-module_exit(cleanup_cstm_mips_ixx);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
-MODULE_DESCRIPTION("MTD map driver for ITE 8172G and Globespan IVR boards");
diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c
new file mode 100644
index 00000000000..a9d808a617c
--- /dev/null
+++ b/drivers/mtd/maps/esb2rom.c
@@ -0,0 +1,450 @@
+/*
+ * esb2rom.c
+ *
+ * Normal mappings of flash chips in physical memory
+ * through the Intel ESB2 Southbridge.
+ *
+ * This was derived from ichxrom.c in May 2006 by
+ * Lew Glendenning <lglendenning@lnxi.com>
+ *
+ * Eric Biederman, of course, was a major help in this effort.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/list.h>
+
+#define MOD_NAME KBUILD_BASENAME
+
+#define ADDRESS_NAME_LEN 18
+
+#define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */
+
+#define BIOS_CNTL 0xDC
+#define BIOS_LOCK_ENABLE 0x02
+#define BIOS_WRITE_ENABLE 0x01
+
+/* This became a 16-bit register, and EN2 has disappeared */
+#define FWH_DEC_EN1 0xD8
+#define FWH_F8_EN 0x8000
+#define FWH_F0_EN 0x4000
+#define FWH_E8_EN 0x2000
+#define FWH_E0_EN 0x1000
+#define FWH_D8_EN 0x0800
+#define FWH_D0_EN 0x0400
+#define FWH_C8_EN 0x0200
+#define FWH_C0_EN 0x0100
+#define FWH_LEGACY_F_EN 0x0080
+#define FWH_LEGACY_E_EN 0x0040
+/* reserved 0x0020 and 0x0010 */
+#define FWH_70_EN 0x0008
+#define FWH_60_EN 0x0004
+#define FWH_50_EN 0x0002
+#define FWH_40_EN 0x0001
+
+/* these are 32-bit values */
+#define FWH_SEL1 0xD0
+#define FWH_SEL2 0xD4
+
+#define FWH_8MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN | FWH_60_EN | FWH_50_EN | FWH_40_EN)
+
+#define FWH_7MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN | FWH_60_EN | FWH_50_EN)
+
+#define FWH_6MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN | FWH_60_EN)
+
+#define FWH_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN)
+
+#define FWH_4MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN)
+
+#define FWH_3_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN)
+
+#define FWH_3MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN)
+
+#define FWH_2_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN)
+
+#define FWH_2MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN)
+
+#define FWH_1_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN)
+
+#define FWH_1MiB (FWH_F8_EN | FWH_F0_EN)
+
+#define FWH_0_5MiB (FWH_F8_EN)
+
+
+struct esb2rom_window {
+ void __iomem* virt;
+ unsigned long phys;
+ unsigned long size;
+ struct list_head maps;
+ struct resource rsrc;
+ struct pci_dev *pdev;
+};
+
+struct esb2rom_map_info {
+ struct list_head list;
+ struct map_info map;
+ struct mtd_info *mtd;
+ struct resource rsrc;
+ char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
+};
+
+static struct esb2rom_window esb2rom_window = {
+ .maps = LIST_HEAD_INIT(esb2rom_window.maps),
+};
+
+static void esb2rom_cleanup(struct esb2rom_window *window)
+{
+ struct esb2rom_map_info *map, *scratch;
+ u8 byte;
+
+ /* Disable writes through the rom window */
+ pci_read_config_byte(window->pdev, BIOS_CNTL, &byte);
+ pci_write_config_byte(window->pdev, BIOS_CNTL,
+ byte & ~BIOS_WRITE_ENABLE);
+
+ /* Free all of the mtd devices */
+ list_for_each_entry_safe(map, scratch, &window->maps, list) {
+ if (map->rsrc.parent)
+ release_resource(&map->rsrc);
+ del_mtd_device(map->mtd);
+ map_destroy(map->mtd);
+ list_del(&map->list);
+ kfree(map);
+ }
+ if (window->rsrc.parent)
+ release_resource(&window->rsrc);
+ if (window->virt) {
+ iounmap(window->virt);
+ window->virt = NULL;
+ window->phys = 0;
+ window->size = 0;
+ }
+ pci_dev_put(window->pdev);
+}
+
+static int __devinit esb2rom_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
+ struct esb2rom_window *window = &esb2rom_window;
+ struct esb2rom_map_info *map = NULL;
+ unsigned long map_top;
+ u8 byte;
+ u16 word;
+
+ /* For now I just handle the ecb2 and I assume there
+ * are not a lot of resources up at the top of the address
+ * space. It is possible to handle other devices in the
+ * top 16MiB but it is very painful. Also since
+ * you can only really attach a FWH to an ICHX there
+ * a number of simplifications you can make.
+ *
+ * Also you can page firmware hubs if an 8MiB window isn't enough
+ * but don't currently handle that case either.
+ */
+ window->pdev = pci_dev_get(pdev);
+
+ /* RLG: experiment 2. Force the window registers to the widest values */
+
+/*
+ pci_read_config_word(pdev, FWH_DEC_EN1, &word);
+ printk(KERN_DEBUG "Original FWH_DEC_EN1 : %x\n", word);
+ pci_write_config_byte(pdev, FWH_DEC_EN1, 0xff);
+ pci_read_config_byte(pdev, FWH_DEC_EN1, &byte);
+ printk(KERN_DEBUG "New FWH_DEC_EN1 : %x\n", byte);
+
+ pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
+ printk(KERN_DEBUG "Original FWH_DEC_EN2 : %x\n", byte);
+ pci_write_config_byte(pdev, FWH_DEC_EN2, 0x0f);
+ pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
+ printk(KERN_DEBUG "New FWH_DEC_EN2 : %x\n", byte);
+*/
+
+ /* Find a region continuous to the end of the ROM window */
+ window->phys = 0;
+ pci_read_config_word(pdev, FWH_DEC_EN1, &word);
+ printk(KERN_DEBUG "pci_read_config_byte : %x\n", word);
+
+ if ((word & FWH_8MiB) == FWH_8MiB)
+ window->phys = 0xff400000;
+ else if ((word & FWH_7MiB) == FWH_7MiB)
+ window->phys = 0xff500000;
+ else if ((word & FWH_6MiB) == FWH_6MiB)
+ window->phys = 0xff600000;
+ else if ((word & FWH_5MiB) == FWH_5MiB)
+ window->phys = 0xFF700000;
+ else if ((word & FWH_4MiB) == FWH_4MiB)
+ window->phys = 0xffc00000;
+ else if ((word & FWH_3_5MiB) == FWH_3_5MiB)
+ window->phys = 0xffc80000;
+ else if ((word & FWH_3MiB) == FWH_3MiB)
+ window->phys = 0xffd00000;
+ else if ((word & FWH_2_5MiB) == FWH_2_5MiB)
+ window->phys = 0xffd80000;
+ else if ((word & FWH_2MiB) == FWH_2MiB)
+ window->phys = 0xffe00000;
+ else if ((word & FWH_1_5MiB) == FWH_1_5MiB)
+ window->phys = 0xffe80000;
+ else if ((word & FWH_1MiB) == FWH_1MiB)
+ window->phys = 0xfff00000;
+ else if ((word & FWH_0_5MiB) == FWH_0_5MiB)
+ window->phys = 0xfff80000;
+
+ /* reserved 0x0020 and 0x0010 */
+ window->phys -= 0x400000UL;
+ window->size = (0xffffffffUL - window->phys) + 1UL;
+
+ /* Enable writes through the rom window */
+ pci_read_config_byte(pdev, BIOS_CNTL, &byte);
+ if (!(byte & BIOS_WRITE_ENABLE) && (byte & (BIOS_LOCK_ENABLE))) {
+ /* The BIOS will generate an error if I enable
+ * this device, so don't even try.
+ */
+ printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n");
+ goto out;
+ }
+ pci_write_config_byte(pdev, BIOS_CNTL, byte | BIOS_WRITE_ENABLE);
+
+ /*
+ * Try to reserve the window mem region. If this fails then
+ * it is likely due to the window being "reseved" by the BIOS.
+ */
+ window->rsrc.name = MOD_NAME;
+ window->rsrc.start = window->phys;
+ window->rsrc.end = window->phys + window->size - 1;
+ window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&iomem_resource, &window->rsrc)) {
+ window->rsrc.parent = NULL;
+ printk(KERN_DEBUG MOD_NAME
+ ": %s(): Unable to register resource"
+ " 0x%.08llx-0x%.08llx - kernel bug?\n",
+ __func__,
+ (unsigned long long)window->rsrc.start,
+ (unsigned long long)window->rsrc.end);
+ }
+
+ /* Map the firmware hub into my address space. */
+ window->virt = ioremap_nocache(window->phys, window->size);
+ if (!window->virt) {
+ printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
+ window->phys, window->size);
+ goto out;
+ }
+
+ /* Get the first address to look for an rom chip at */
+ map_top = window->phys;
+ if ((window->phys & 0x3fffff) != 0) {
+ /* if not aligned on 4MiB, look 4MiB lower in address space */
+ map_top = window->phys + 0x400000;
+ }
+#if 1
+ /* The probe sequence run over the firmware hub lock
+ * registers sets them to 0x7 (no access).
+ * (Insane hardware design, but most copied Intel's.)
+ * ==> Probe at most the last 4M of the address space.
+ */
+ if (map_top < 0xffc00000)
+ map_top = 0xffc00000;
+#endif
+ /* Loop through and look for rom chips */
+ while ((map_top - 1) < 0xffffffffUL) {
+ struct cfi_private *cfi;
+ unsigned long offset;
+ int i;
+
+ if (!map)
+ map = kmalloc(sizeof(*map), GFP_KERNEL);
+ if (!map) {
+ printk(KERN_ERR MOD_NAME ": kmalloc failed");
+ goto out;
+ }
+ memset(map, 0, sizeof(*map));
+ INIT_LIST_HEAD(&map->list);
+ map->map.name = map->map_name;
+ map->map.phys = map_top;
+ offset = map_top - window->phys;
+ map->map.virt = (void __iomem *)
+ (((unsigned long)(window->virt)) + offset);
+ map->map.size = 0xffffffffUL - map_top + 1UL;
+ /* Set the name of the map to the address I am trying */
+ sprintf(map->map_name, "%s @%08lx",
+ MOD_NAME, map->map.phys);
+
+ /* Firmware hubs only use vpp when being programmed
+ * in a factory setting. So in-place programming
+ * needs to use a different method.
+ */
+ for(map->map.bankwidth = 32; map->map.bankwidth;
+ map->map.bankwidth >>= 1) {
+ char **probe_type;
+ /* Skip bankwidths that are not supported */
+ if (!map_bankwidth_supported(map->map.bankwidth))
+ continue;
+
+ /* Setup the map methods */
+ simple_map_init(&map->map);
+
+ /* Try all of the probe methods */
+ probe_type = rom_probe_types;
+ for(; *probe_type; probe_type++) {
+ map->mtd = do_map_probe(*probe_type, &map->map);
+ if (map->mtd)
+ goto found;
+ }
+ }
+ map_top += ROM_PROBE_STEP_SIZE;
+ continue;
+ found:
+ /* Trim the size if we are larger than the map */
+ if (map->mtd->size > map->map.size) {
+ printk(KERN_WARNING MOD_NAME
+ " rom(%u) larger than window(%lu). fixing...\n",
+ map->mtd->size, map->map.size);
+ map->mtd->size = map->map.size;
+ }
+ if (window->rsrc.parent) {
+ /*
+ * Registering the MTD device in iomem may not be possible
+ * if there is a BIOS "reserved" and BUSY range. If this
+ * fails then continue anyway.
+ */
+ map->rsrc.name = map->map_name;
+ map->rsrc.start = map->map.phys;
+ map->rsrc.end = map->map.phys + map->mtd->size - 1;
+ map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&window->rsrc, &map->rsrc)) {
+ printk(KERN_ERR MOD_NAME
+ ": cannot reserve MTD resource\n");
+ map->rsrc.parent = NULL;
+ }
+ }
+
+ /* Make the whole region visible in the map */
+ map->map.virt = window->virt;
+ map->map.phys = window->phys;
+ cfi = map->map.fldrv_priv;
+ for(i = 0; i < cfi->numchips; i++)
+ cfi->chips[i].start += offset;
+
+ /* Now that the mtd devices is complete claim and export it */
+ map->mtd->owner = THIS_MODULE;
+ if (add_mtd_device(map->mtd)) {
+ map_destroy(map->mtd);
+ map->mtd = NULL;
+ goto out;
+ }
+
+ /* Calculate the new value of map_top */
+ map_top += map->mtd->size;
+
+ /* File away the map structure */
+ list_add(&map->list, &window->maps);
+ map = NULL;
+ }
+
+ out:
+ /* Free any left over map structures */
+ kfree(map);
+
+ /* See if I have any map structures */
+ if (list_empty(&window->maps)) {
+ esb2rom_cleanup(window);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void __devexit esb2rom_remove_one (struct pci_dev *pdev)
+{
+ struct esb2rom_window *window = &esb2rom_window;
+ esb2rom_cleanup(window);
+}
+
+static struct pci_device_id esb2rom_pci_tbl[] __devinitdata = {
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { 0, },
+};
+
+#if 0
+MODULE_DEVICE_TABLE(pci, esb2rom_pci_tbl);
+
+static struct pci_driver esb2rom_driver = {
+ .name = MOD_NAME,
+ .id_table = esb2rom_pci_tbl,
+ .probe = esb2rom_init_one,
+ .remove = esb2rom_remove_one,
+};
+#endif
+
+static int __init init_esb2rom(void)
+{
+ struct pci_dev *pdev;
+ struct pci_device_id *id;
+ int retVal;
+
+ pdev = NULL;
+ for (id = esb2rom_pci_tbl; id->vendor; id++) {
+ printk(KERN_DEBUG "device id = %x\n", id->device);
+ pdev = pci_get_device(id->vendor, id->device, NULL);
+ if (pdev) {
+ printk(KERN_DEBUG "matched device = %x\n", id->device);
+ break;
+ }
+ }
+ if (pdev) {
+ printk(KERN_DEBUG "matched device id %x\n", id->device);
+ retVal = esb2rom_init_one(pdev, &esb2rom_pci_tbl[0]);
+ pci_dev_put(pdev);
+ printk(KERN_DEBUG "retVal = %d\n", retVal);
+ return retVal;
+ }
+ return -ENXIO;
+#if 0
+ return pci_register_driver(&esb2rom_driver);
+#endif
+}
+
+static void __exit cleanup_esb2rom(void)
+{
+ esb2rom_remove_one(esb2rom_window.pdev);
+}
+
+module_init(init_esb2rom);
+module_exit(cleanup_esb2rom);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lew Glendenning <lglendenning@lnxi.com>");
+MODULE_DESCRIPTION("MTD map driver for BIOS chips on the ESB2 southbridge");
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index c8db01b3e45..6946d802e6f 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -75,14 +75,12 @@ static int armflash_probe(struct platform_device *dev)
int err;
void __iomem *base;
- info = kmalloc(sizeof(struct armflash_info), GFP_KERNEL);
+ info = kzalloc(sizeof(struct armflash_info), GFP_KERNEL);
if (!info) {
err = -ENOMEM;
goto out;
}
- memset(info, 0, sizeof(struct armflash_info));
-
info->plat = plat;
if (plat && plat->init) {
err = plat->init();
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index f9e8e5bcbc3..9f53c655af3 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -20,6 +20,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/cfi.h>
#include <linux/reboot.h>
+#include <linux/err.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
#include <asm/io.h>
@@ -178,7 +179,7 @@ int nettel_eraseconfig(void)
init_waitqueue_head(&wait_q);
mtd = get_mtd_device(NULL, 2);
- if (mtd) {
+ if (!IS_ERR(mtd)) {
nettel_erase.mtd = mtd;
nettel_erase.callback = nettel_erasecallback;
nettel_erase.callback = NULL;
@@ -471,7 +472,7 @@ out_unmap2:
iounmap(nettel_amd_map.virt);
return(rc);
-
+
}
/****************************************************************************/
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index 418afffb2d8..e8d9ae53567 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -78,12 +78,10 @@ static int __devinit omapflash_probe(struct platform_device *pdev)
struct resource *res = pdev->resource;
unsigned long size = res->end - res->start + 1;
- info = kmalloc(sizeof(struct omapflash_info), GFP_KERNEL);
+ info = kzalloc(sizeof(struct omapflash_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
- memset(info, 0, sizeof(struct omapflash_info));
-
if (!request_mem_region(res->start, size, "flash")) {
err = -EBUSY;
goto out_free_info;
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 995347b1beb..eaeb56a4070 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -735,11 +735,10 @@ static int pcmciamtd_probe(struct pcmcia_device *link)
struct pcmciamtd_dev *dev;
/* Create new memory card device */
- dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) return -ENOMEM;
DEBUG(1, "dev=0x%p", dev);
- memset(dev, 0, sizeof(*dev));
dev->p_dev = link;
link->priv = dev;
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index d1717763f71..28c5ffd7523 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -89,15 +89,14 @@ static int physmap_flash_probe(struct platform_device *dev)
return -ENODEV;
printk(KERN_NOTICE "physmap platform flash device: %.8llx at %.8llx\n",
- (unsigned long long)dev->resource->end - dev->resource->start + 1,
+ (unsigned long long)(dev->resource->end - dev->resource->start + 1),
(unsigned long long)dev->resource->start);
- info = kmalloc(sizeof(struct physmap_flash_info), GFP_KERNEL);
+ info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL);
if (info == NULL) {
err = -ENOMEM;
goto err_out;
}
- memset(info, 0, sizeof(*info));
platform_set_drvdata(dev, info);
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
new file mode 100644
index 00000000000..7efe744ad31
--- /dev/null
+++ b/drivers/mtd/maps/physmap_of.c
@@ -0,0 +1,255 @@
+/*
+ * Normal mappings of chips in physical memory for OF devices
+ *
+ * Copyright (C) 2006 MontaVista Software Inc.
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+
+struct physmap_flash_info {
+ struct mtd_info *mtd;
+ struct map_info map;
+ struct resource *res;
+#ifdef CONFIG_MTD_PARTITIONS
+ int nr_parts;
+ struct mtd_partition *parts;
+#endif
+};
+
+static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+#ifdef CONFIG_MTD_PARTITIONS
+static int parse_flash_partitions(struct device_node *node,
+ struct mtd_partition **parts)
+{
+ int i, plen, retval = -ENOMEM;
+ const u32 *part;
+ const char *name;
+
+ part = get_property(node, "partitions", &plen);
+ if (part == NULL)
+ goto err;
+
+ retval = plen / (2 * sizeof(u32));
+ *parts = kzalloc(retval * sizeof(struct mtd_partition), GFP_KERNEL);
+ if (*parts == NULL) {
+ printk(KERN_ERR "Can't allocate the flash partition data!\n");
+ goto err;
+ }
+
+ name = get_property(node, "partition-names", &plen);
+
+ for (i = 0; i < retval; i++) {
+ (*parts)[i].offset = *part++;
+ (*parts)[i].size = *part & ~1;
+ if (*part++ & 1) /* bit 0 set signifies read only partition */
+ (*parts)[i].mask_flags = MTD_WRITEABLE;
+
+ if (name != NULL && plen > 0) {
+ int len = strlen(name) + 1;
+
+ (*parts)[i].name = (char *)name;
+ plen -= len;
+ name += len;
+ } else
+ (*parts)[i].name = "unnamed";
+ }
+err:
+ return retval;
+}
+#endif
+
+static int of_physmap_remove(struct of_device *dev)
+{
+ struct physmap_flash_info *info;
+
+ info = dev_get_drvdata(&dev->dev);
+ if (info == NULL)
+ return 0;
+ dev_set_drvdata(&dev->dev, NULL);
+
+ if (info->mtd != NULL) {
+#ifdef CONFIG_MTD_PARTITIONS
+ if (info->nr_parts) {
+ del_mtd_partitions(info->mtd);
+ kfree(info->parts);
+ } else {
+ del_mtd_device(info->mtd);
+ }
+#else
+ del_mtd_device(info->mtd);
+#endif
+ map_destroy(info->mtd);
+ }
+
+ if (info->map.virt != NULL)
+ iounmap(info->map.virt);
+
+ if (info->res != NULL) {
+ release_resource(info->res);
+ kfree(info->res);
+ }
+
+ return 0;
+}
+
+static int __devinit of_physmap_probe(struct of_device *dev, const struct of_device_id *match)
+{
+ struct device_node *dp = dev->node;
+ struct resource res;
+ struct physmap_flash_info *info;
+ const char **probe_type;
+ const char *of_probe;
+ const u32 *width;
+ int err;
+
+
+ if (of_address_to_resource(dp, 0, &res)) {
+ dev_err(&dev->dev, "Can't get the flash mapping!\n");
+ err = -EINVAL;
+ goto err_out;
+ }
+
+ dev_dbg(&dev->dev, "physmap flash device: %.8llx at %.8llx\n",
+ (unsigned long long)res.end - res.start + 1,
+ (unsigned long long)res.start);
+
+ info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL);
+ if (info == NULL) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ memset(info, 0, sizeof(*info));
+
+ dev_set_drvdata(&dev->dev, info);
+
+ info->res = request_mem_region(res.start, res.end - res.start + 1,
+ dev->dev.bus_id);
+ if (info->res == NULL) {
+ dev_err(&dev->dev, "Could not reserve memory region\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ width = get_property(dp, "bank-width", NULL);
+ if (width == NULL) {
+ dev_err(&dev->dev, "Can't get the flash bank width!\n");
+ err = -EINVAL;
+ goto err_out;
+ }
+
+ info->map.name = dev->dev.bus_id;
+ info->map.phys = res.start;
+ info->map.size = res.end - res.start + 1;
+ info->map.bankwidth = *width;
+
+ info->map.virt = ioremap(info->map.phys, info->map.size);
+ if (info->map.virt == NULL) {
+ dev_err(&dev->dev, "Failed to ioremap flash region\n");
+ err = EIO;
+ goto err_out;
+ }
+
+ simple_map_init(&info->map);
+
+ of_probe = get_property(dp, "probe-type", NULL);
+ if (of_probe == NULL) {
+ probe_type = rom_probe_types;
+ for (; info->mtd == NULL && *probe_type != NULL; probe_type++)
+ info->mtd = do_map_probe(*probe_type, &info->map);
+ } else if (!strcmp(of_probe, "CFI"))
+ info->mtd = do_map_probe("cfi_probe", &info->map);
+ else if (!strcmp(of_probe, "JEDEC"))
+ info->mtd = do_map_probe("jedec_probe", &info->map);
+ else {
+ if (strcmp(of_probe, "ROM"))
+ dev_dbg(&dev->dev, "map_probe: don't know probe type "
+ "'%s', mapping as rom\n");
+ info->mtd = do_map_probe("mtd_rom", &info->map);
+ }
+ if (info->mtd == NULL) {
+ dev_err(&dev->dev, "map_probe failed\n");
+ err = -ENXIO;
+ goto err_out;
+ }
+ info->mtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+ err = parse_mtd_partitions(info->mtd, part_probe_types, &info->parts, 0);
+ if (err > 0) {
+ add_mtd_partitions(info->mtd, info->parts, err);
+ } else if ((err = parse_flash_partitions(dp, &info->parts)) > 0) {
+ dev_info(&dev->dev, "Using OF partition information\n");
+ add_mtd_partitions(info->mtd, info->parts, err);
+ info->nr_parts = err;
+ } else
+#endif
+
+ add_mtd_device(info->mtd);
+ return 0;
+
+err_out:
+ of_physmap_remove(dev);
+ return err;
+
+ return 0;
+
+
+}
+
+static struct of_device_id of_physmap_match[] = {
+ {
+ .type = "rom",
+ .compatible = "direct-mapped"
+ },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, of_physmap_match);
+
+
+static struct of_platform_driver of_physmap_flash_driver = {
+ .name = "physmap-flash",
+ .match_table = of_physmap_match,
+ .probe = of_physmap_probe,
+ .remove = of_physmap_remove,
+};
+
+static int __init of_physmap_init(void)
+{
+ return of_register_platform_driver(&of_physmap_flash_driver);
+}
+
+static void __exit of_physmap_exit(void)
+{
+ of_unregister_platform_driver(&of_physmap_flash_driver);
+}
+
+module_init(of_physmap_init);
+module_exit(of_physmap_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vitaly Wool <vwool@ru.mvista.com>");
+MODULE_DESCRIPTION("Configurable MTD map driver for OF");
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 5d3c75451ca..2b6504ecbbd 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -147,14 +147,13 @@ static int platram_probe(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL) {
dev_err(&pdev->dev, "no memory for flash info\n");
err = -ENOMEM;
goto exit_error;
}
- memset(info, 0, sizeof(*info));
platform_set_drvdata(pdev, info);
info->dev = &pdev->dev;
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 950bf1c5784..f904e6bd02e 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -273,14 +273,12 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat)
/*
* Allocate the map_info structs in one go.
*/
- info = kmalloc(size, GFP_KERNEL);
+ info = kzalloc(size, GFP_KERNEL);
if (!info) {
ret = -ENOMEM;
goto out;
}
- memset(info, 0, size);
-
if (plat->init) {
ret = plat->init();
if (ret)
diff --git a/drivers/mtd/maps/tqm834x.c b/drivers/mtd/maps/tqm834x.c
index 58e5912bd38..9adc970e55e 100644
--- a/drivers/mtd/maps/tqm834x.c
+++ b/drivers/mtd/maps/tqm834x.c
@@ -132,20 +132,16 @@ static int __init init_tqm834x_mtd(void)
pr_debug("%s: chip probing count %d\n", __FUNCTION__, idx);
- map_banks[idx] =
- (struct map_info *)kmalloc(sizeof(struct map_info),
- GFP_KERNEL);
+ map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL);
if (map_banks[idx] == NULL) {
ret = -ENOMEM;
goto error_mem;
}
- memset((void *)map_banks[idx], 0, sizeof(struct map_info));
- map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL);
+ map_banks[idx]->name = kzalloc(16, GFP_KERNEL);
if (map_banks[idx]->name == NULL) {
ret = -ENOMEM;
goto error_mem;
}
- memset((void *)map_banks[idx]->name, 0, 16);
sprintf(map_banks[idx]->name, "TQM834x-%d", idx);
map_banks[idx]->size = flash_size;
diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c
index 19578ba84ee..37e4ded9b60 100644
--- a/drivers/mtd/maps/tqm8xxl.c
+++ b/drivers/mtd/maps/tqm8xxl.c
@@ -134,14 +134,13 @@ int __init init_tqm_mtd(void)
printk(KERN_INFO "%s: chip probing count %d\n", __FUNCTION__, idx);
- map_banks[idx] = (struct map_info *)kmalloc(sizeof(struct map_info), GFP_KERNEL);
+ map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL);
if(map_banks[idx] == NULL) {
ret = -ENOMEM;
/* FIXME: What if some MTD devices were probed already? */
goto error_mem;
}
- memset((void *)map_banks[idx], 0, sizeof(struct map_info));
map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL);
if (!map_banks[idx]->name) {
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 22:34:16 +0000