diff options
Diffstat (limited to 'drivers/mtd/nand/s3c2410.c')
-rw-r--r-- | drivers/mtd/nand/s3c2410.c | 73 |
1 files changed, 58 insertions, 15 deletions
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 9260ad94752..b34a460ab67 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -119,8 +119,7 @@ struct s3c2410_nand_info { void __iomem *sel_reg; int sel_bit; int mtd_count; - - unsigned long save_nfconf; + unsigned long save_sel; enum s3c_cpu_type cpu_type; }; @@ -358,6 +357,14 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, if (diff0 == 0 && diff1 == 0 && diff2 == 0) return 0; /* ECC is ok */ + /* sometimes people do not think about using the ECC, so check + * to see if we have an 0xff,0xff,0xff read ECC and then ignore + * the error, on the assumption that this is an un-eccd page. + */ + if (read_ecc[0] == 0xff && read_ecc[1] == 0xff && read_ecc[2] == 0xff + && info->platform->ignore_unset_ecc) + return 0; + /* Can we correct this ECC (ie, one row and column change). * Note, this is similar to the 256 error code on smartmedia */ @@ -473,7 +480,7 @@ static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u ecc_code[1] = ecc >> 8; ecc_code[2] = ecc >> 16; - pr_debug("%s: returning ecc %06lx\n", __func__, ecc); + pr_debug("%s: returning ecc %06lx\n", __func__, ecc & 0xffffff); return 0; } @@ -644,9 +651,6 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, chip->ecc.calculate = s3c2410_nand_calculate_ecc; chip->ecc.correct = s3c2410_nand_correct_data; chip->ecc.mode = NAND_ECC_HW; - chip->ecc.size = 512; - chip->ecc.bytes = 3; - chip->ecc.layout = &nand_hw_eccoob; switch (info->cpu_type) { case TYPE_S3C2410: @@ -668,6 +672,40 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, } else { chip->ecc.mode = NAND_ECC_SOFT; } + + if (set->ecc_layout != NULL) + chip->ecc.layout = set->ecc_layout; + + if (set->disable_ecc) + chip->ecc.mode = NAND_ECC_NONE; +} + +/* s3c2410_nand_update_chip + * + * post-probe chip update, to change any items, such as the + * layout for large page nand + */ + +static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info, + struct s3c2410_nand_mtd *nmtd) +{ + struct nand_chip *chip = &nmtd->chip; + + printk("%s: chip %p: %d\n", __func__, chip, chip->page_shift); + + if (hardware_ecc) { + /* change the behaviour depending on wether we are using + * the large or small page nand device */ + + if (chip->page_shift > 10) { + chip->ecc.size = 256; + chip->ecc.bytes = 3; + } else { + chip->ecc.size = 512; + chip->ecc.bytes = 3; + chip->ecc.layout = &nand_hw_eccoob; + } + } } /* s3c2410_nand_probe @@ -776,9 +814,12 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, s3c2410_nand_init_chip(info, nmtd, sets); - nmtd->scan_res = nand_scan(&nmtd->mtd, (sets) ? sets->nr_chips : 1); + nmtd->scan_res = nand_scan_ident(&nmtd->mtd, + (sets) ? sets->nr_chips : 1); if (nmtd->scan_res == 0) { + s3c2410_nand_update_chip(info, nmtd); + nand_scan_tail(&nmtd->mtd); s3c2410_nand_add_partition(info, nmtd, sets); } @@ -810,15 +851,14 @@ static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm) struct s3c2410_nand_info *info = platform_get_drvdata(dev); if (info) { - info->save_nfconf = readl(info->regs + S3C2410_NFCONF); + info->save_sel = readl(info->sel_reg); /* For the moment, we must ensure nFCE is high during * the time we are suspended. This really should be * handled by suspending the MTDs we are using, but * that is currently not the case. */ - writel(info->save_nfconf | info->sel_bit, - info->regs + S3C2410_NFCONF); + writel(info->save_sel | info->sel_bit, info->sel_reg); if (!allow_clk_stop(info)) clk_disable(info->clk); @@ -830,7 +870,7 @@ static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm) static int s3c24xx_nand_resume(struct platform_device *dev) { struct s3c2410_nand_info *info = platform_get_drvdata(dev); - unsigned long nfconf; + unsigned long sel; if (info) { clk_enable(info->clk); @@ -838,10 +878,10 @@ static int s3c24xx_nand_resume(struct platform_device *dev) /* Restore the state of the nFCE line. */ - nfconf = readl(info->regs + S3C2410_NFCONF); - nfconf &= ~info->sel_bit; - nfconf |= info->save_nfconf & info->sel_bit; - writel(nfconf, info->regs + S3C2410_NFCONF); + sel = readl(info->sel_reg); + sel &= ~info->sel_bit; + sel |= info->save_sel & info->sel_bit; + writel(sel, info->sel_reg); if (allow_clk_stop(info)) clk_disable(info->clk); @@ -927,3 +967,6 @@ module_exit(s3c2410_nand_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); MODULE_DESCRIPTION("S3C24XX MTD NAND driver"); +MODULE_ALIAS("platform:s3c2410-nand"); +MODULE_ALIAS("platform:s3c2412-nand"); +MODULE_ALIAS("platform:s3c2440-nand"); |