aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/diskonchip.c5
-rw-r--r--drivers/mtd/nand/nand_base.c52
-rw-r--r--drivers/mtd/nand/ndfc.c2
-rw-r--r--drivers/mtd/nand/rtc_from4.c5
-rw-r--r--drivers/mtd/nand/s3c2410.c5
-rw-r--r--drivers/mtd/nand/sharpsl.c5
6 files changed, 42 insertions, 32 deletions
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 82262a4a420..463e12ced1b 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1058,8 +1058,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
* safer. The only problem with it is that any code that parses oobfree must
* be able to handle out-of-order segments.
*/
-static struct nand_oobinfo doc200x_oobinfo = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout doc200x_oobinfo = {
.eccbytes = 6,
.eccpos = {0, 1, 2, 3, 4, 5},
.oobfree = {{8, 8}, {6, 2}}
@@ -1662,7 +1661,7 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.calculate = doc200x_calculate_ecc;
nand->ecc.correct = doc200x_correct_data;
- nand->autooob = &doc200x_oobinfo;
+ nand->ecc.layout = &doc200x_oobinfo;
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 20f79fec73b..e922b829c4b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -52,28 +52,33 @@
#endif
/* Define default oob placement schemes for large and small page devices */
-static struct nand_oobinfo nand_oob_8 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_8 = {
.eccbytes = 3,
.eccpos = {0, 1, 2},
- .oobfree = {{3, 2}, {6, 2}}
+ .oobfree = {
+ {.offset = 3,
+ .length = 2},
+ {.offset = 6,
+ .length = 2}}
};
-static struct nand_oobinfo nand_oob_16 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_16 = {
.eccbytes = 6,
.eccpos = {0, 1, 2, 3, 6, 7},
- .oobfree = {{8, 8}}
+ .oobfree = {
+ {.offset = 8,
+ . length = 8}}
};
-static struct nand_oobinfo nand_oob_64 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_64 = {
.eccbytes = 24,
.eccpos = {
40, 41, 42, 43, 44, 45, 46, 47,
48, 49, 50, 51, 52, 53, 54, 55,
56, 57, 58, 59, 60, 61, 62, 63},
- .oobfree = {{2, 38}}
+ .oobfree = {
+ {.offset = 2,
+ .length = 38}}
};
/* This is used for padding purposes in nand_write_oob */
@@ -749,7 +754,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *p = buf;
uint8_t *ecc_calc = chip->buffers.ecccalc;
uint8_t *ecc_code = chip->buffers.ecccode;
- int *eccpos = chip->autooob->eccpos;
+ int *eccpos = chip->ecc.layout->eccpos;
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -795,7 +800,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *p = buf;
uint8_t *ecc_calc = chip->buffers.ecccalc;
uint8_t *ecc_code = chip->buffers.ecccode;
- int *eccpos = chip->autooob->eccpos;
+ int *eccpos = chip->ecc.layout->eccpos;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
chip->ecc.hwctl(mtd, NAND_ECC_READ);
@@ -1198,7 +1203,7 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
int eccsteps = chip->ecc.steps;
uint8_t *ecc_calc = chip->buffers.ecccalc;
const uint8_t *p = buf;
- int *eccpos = chip->autooob->eccpos;
+ int *eccpos = chip->ecc.layout->eccpos;
if (chip->ecc.mode != NAND_ECC_NONE) {
/* Software ecc calculation */
@@ -1227,7 +1232,7 @@ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
int eccsteps = chip->ecc.steps;
uint8_t *ecc_calc = chip->buffers.ecccalc;
const uint8_t *p = buf;
- int *eccpos = chip->autooob->eccpos;
+ int *eccpos = chip->ecc.layout->eccpos;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
@@ -2124,16 +2129,16 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
/*
* If no default placement scheme is given, select an appropriate one
*/
- if (!chip->autooob) {
+ if (!chip->ecc.layout) {
switch (mtd->oobsize) {
case 8:
- chip->autooob = &nand_oob_8;
+ chip->ecc.layout = &nand_oob_8;
break;
case 16:
- chip->autooob = &nand_oob_16;
+ chip->ecc.layout = &nand_oob_16;
break;
case 64:
- chip->autooob = &nand_oob_64;
+ chip->ecc.layout = &nand_oob_64;
break;
default:
printk(KERN_WARNING "No oob scheme defined for "
@@ -2198,6 +2203,15 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
}
/*
+ * The number of bytes available for a client to place data into
+ * the out of band area
+ */
+ chip->ecc.layout->oobavail = 0;
+ for (i = 0; chip->ecc.layout->oobfree[i].length; i++)
+ chip->ecc.layout->oobavail +=
+ chip->ecc.layout->oobfree[i].length;
+
+ /*
* Set the number of read / write steps for one page depending on ECC
* mode
*/
@@ -2236,8 +2250,8 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
mtd->block_isbad = nand_block_isbad;
mtd->block_markbad = nand_block_markbad;
- /* and make the autooob the default one */
- mtd->oobinfo = chip->autooob;
+ /* propagate ecc.layout to mtd_info */
+ mtd->ecclayout = chip->ecc.layout;
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 5790d630fae..551702ddcac 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -168,7 +168,7 @@ static void ndfc_chip_init(struct ndfc_nand_mtd *mtd)
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 256;
chip->ecc.bytes = 3;
- chip->autooob = mtd->pl_chip->oobinfo;
+ chip->ecclayout = mtd->pl_chip->ecclayout;
mtd->mtd.priv = chip;
mtd->mtd.owner = THIS_MODULE;
}
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index de6de91fbad..f8c49645324 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -142,8 +142,7 @@ static struct rs_control *rs_decoder;
/*
* hardware specific Out Of Band information
*/
-static struct nand_oobinfo rtc_from4_nand_oobinfo = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout rtc_from4_nand_oobinfo = {
.eccbytes = 32,
.eccpos = {
0, 1, 2, 3, 4, 5, 6, 7,
@@ -574,7 +573,7 @@ static int __init rtc_from4_init(void)
/* return the status of extra status and ECC checks */
this->errstat = rtc_from4_errstat;
/* set the nand_oobinfo to support FPGA H/W error detection */
- this->autooob = &rtc_from4_nand_oobinfo;
+ this->ecc.layout = &rtc_from4_nand_oobinfo;
this->ecc.hwctl = rtc_from4_enable_hwecc;
this->ecc.calculate = rtc_from4_calculate_ecc;
this->ecc.correct = rtc_from4_correct_data;
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 215227d1a65..8429793a628 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -76,8 +76,7 @@ static int hardware_ecc = 0;
/* new oob placement block for use with hardware ecc generation
*/
-static struct nand_oobinfo nand_hw_eccoob = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_hw_eccoob = {
.eccbytes = 3,
.eccpos = {0, 1, 2},
.oobfree = {{8, 8}}
@@ -502,7 +501,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 512;
chip->ecc.bytes = 3;
- chip->autooob = &nand_hw_eccoob;
+ chip->ecc.layout = &nand_hw_eccoob;
if (info->is_s3c2440) {
chip->ecc.hwctl = s3c2440_nand_enable_hwecc;
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 45a1da724bf..21743658d15 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -115,8 +115,7 @@ static struct nand_bbt_descr sharpsl_akita_bbt = {
.pattern = scan_ff_pattern
};
-static struct nand_oobinfo akita_oobinfo = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout akita_oobinfo = {
.eccbytes = 24,
.eccpos = {
0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
@@ -202,7 +201,7 @@ static int __init sharpsl_nand_init(void)
this->badblock_pattern = &sharpsl_bbt;
if (machine_is_akita() || machine_is_borzoi()) {
this->badblock_pattern = &sharpsl_akita_bbt;
- this->autooob = &akita_oobinfo;
+ this->ecc.layout = &akita_oobinfo;
}
this->ecc.hwctl = sharpsl_nand_enable_hwecc;
this->ecc.calculate = sharpsl_nand_calculate_ecc;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 08:07:31 +0000