aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/Kconfig4
-rw-r--r--drivers/mtd/maps/Kconfig2
-rw-r--r--drivers/mtd/nand/Kconfig2
3 files changed, 4 insertions, 4 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index f6b775e63ac..5ac265dde42 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -78,7 +78,7 @@ config MTD_REDBOOT_DIRECTORY_BLOCK
option.
The option specifies which Flash sectors holds the RedBoot
- partition table. A zero or positive value gives an absolete
+ partition table. A zero or positive value gives an absolute
erase block number. A negative value specifies a number of
sectors before the end of the device.
@@ -103,7 +103,7 @@ config MTD_CMDLINE_PARTS
bool "Command line partition table parsing"
depends on MTD_PARTITIONS = "y"
---help---
- Allow generic configuration of the MTD paritition tables via the kernel
+ Allow generic configuration of the MTD partition tables via the kernel
command line. Multiple flash resources are supported for hardware where
different kinds of flash memory are available.
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index b06ef2bdd42..4e2bd37b3d8 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -109,7 +109,7 @@ config MTD_TS5500
mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL.
Note that jumper 3 ("Write Enable Drive A") must be set
- otherwise detection won't succeeed.
+ otherwise detection won't succeed.
config MTD_SBC_GXX
tristate "CFI Flash device mapped on Arcom SBC-GXx boards"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4a1db31aef6..b4a7086b219 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -93,7 +93,7 @@ config MTD_NAND_S3C2410
This enables the NAND flash controller on the S3C2410 and S3C2440
SoCs
- No board specfic support is done by this driver, each board
+ No board specific support is done by this driver, each board
must advertise a platform_device for the driver to attach.
config MTD_NAND_S3C2410_DEBUG