aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/3c509.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/3c509.c')
-rw-r--r--drivers/net/3c509.c53
1 files changed, 22 insertions, 31 deletions
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index cbdae54f715..59c33925be6 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -28,7 +28,7 @@
FIXES:
Alan Cox: Removed the 'Unexpected interrupt' bug.
Michael Meskes: Upgraded to Donald Becker's version 1.07.
- Alan Cox: Increased the eeprom delay. Regardless of
+ Alan Cox: Increased the eeprom delay. Regardless of
what the docs say some people definitely
get problems with lower (but in card spec)
delays
@@ -162,7 +162,7 @@ enum RxFilter {
#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */
#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
#define WN4_NETDIAG 0x06 /* Window 4: Net diagnostic */
-#define FD_ENABLE 0x8000 /* Enable full-duplex ("external loopback") */
+#define FD_ENABLE 0x8000 /* Enable full-duplex ("external loopback") */
/*
* Must be a power of two (we use a binary and in the
@@ -200,7 +200,7 @@ static void set_multicast_list(struct net_device *dev);
static void el3_tx_timeout (struct net_device *dev);
static void el3_down(struct net_device *dev);
static void el3_up(struct net_device *dev);
-static struct ethtool_ops ethtool_ops;
+static const struct ethtool_ops ethtool_ops;
#ifdef EL3_SUSPEND
static int el3_suspend(struct device *, pm_message_t);
static int el3_resume(struct device *);
@@ -350,7 +350,7 @@ static int __init el3_common_init(struct net_device *dev)
{
const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"};
printk("%s: 3c5x9 found at %#3.3lx, %s port, address ",
- dev->name, dev->base_addr,
+ dev->name, dev->base_addr,
if_names[(dev->if_port & 0x03)]);
}
@@ -528,7 +528,7 @@ no_pnp:
SET_MODULE_OWNER(dev);
netdev_boot_setup_check(dev);
-
+
/* Set passed-in IRQ or I/O Addr. */
if (dev->irq > 1 && dev->irq < 16)
irq = dev->irq;
@@ -630,7 +630,7 @@ static int __init el3_mca_probe(struct device *device)
if_port = pos4 & 0x03;
irq = mca_device_transform_irq(mdev, irq);
- ioaddr = mca_device_transform_ioport(mdev, ioaddr);
+ ioaddr = mca_device_transform_ioport(mdev, ioaddr);
if (el3_debug > 2) {
printk("3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
}
@@ -667,7 +667,7 @@ static int __init el3_mca_probe(struct device *device)
el3_cards++;
return 0;
}
-
+
#endif /* CONFIG_MCA */
#ifdef CONFIG_EISA
@@ -684,7 +684,7 @@ static int __init el3_eisa_probe (struct device *device)
/* Yeepee, The driver framework is calling us ! */
edev = to_eisa_device (device);
ioaddr = edev->base_addr;
-
+
if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509"))
return -EBUSY;
@@ -751,7 +751,7 @@ static int __devexit el3_device_remove (struct device *device)
static ushort read_eeprom(int ioaddr, int index)
{
outw(EEPROM_READ + index, ioaddr + 10);
- /* Pause for at least 162 us. for the read to take place.
+ /* Pause for at least 162 us. for the read to take place.
Some chips seem to require much longer */
mdelay(2);
return inw(ioaddr + 12);
@@ -769,7 +769,7 @@ static ushort __init id_read_eeprom(int index)
/* Pause for at least 162 us. for the read to take place. */
/* Some chips seem to require much longer */
mdelay(4);
-
+
for (bit = 15; bit >= 0; bit--)
word = (word << 1) + (inb(id_port) & 0x01);
@@ -838,7 +838,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
netif_stop_queue (dev);
lp->stats.tx_bytes += skb->len;
-
+
if (el3_debug > 4) {
printk("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
dev->name, skb->len, inw(ioaddr + EL3_STATUS));
@@ -879,11 +879,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
outw(skb->len, ioaddr + TX_FIFO);
outw(0x00, ioaddr + TX_FIFO);
/* ... and the packet rounded to a doubleword. */
-#ifdef __powerpc__
- outsl_ns(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
-#else
outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
-#endif
dev->trans_start = jiffies;
if (inw(ioaddr + TX_FREE) > 1536)
@@ -1024,7 +1020,7 @@ el3_get_stats(struct net_device *dev)
* This is fast enough not to bother with disable IRQ
* stuff.
*/
-
+
spin_lock_irqsave(&lp->lock, flags);
update_stats(dev);
spin_unlock_irqrestore(&lp->lock, flags);
@@ -1103,13 +1099,8 @@ el3_rx(struct net_device *dev)
skb_reserve(skb, 2); /* Align IP on 16 byte */
/* 'skb->data' points to the start of sk_buff data area. */
-#ifdef __powerpc__
- insl_ns(ioaddr+RX_FIFO, skb_put(skb,pkt_len),
- (pkt_len + 3) >> 2);
-#else
insl(ioaddr + RX_FIFO, skb_put(skb,pkt_len),
(pkt_len + 3) >> 2);
-#endif
outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
skb->protocol = eth_type_trans(skb,dev);
@@ -1168,7 +1159,7 @@ el3_close(struct net_device *dev)
{
int ioaddr = dev->base_addr;
struct el3_private *lp = netdev_priv(dev);
-
+
if (el3_debug > 2)
printk("%s: Shutting down ethercard.\n", dev->name);
@@ -1187,7 +1178,7 @@ el3_close(struct net_device *dev)
return 0;
}
-static int
+static int
el3_link_ok(struct net_device *dev)
{
int ioaddr = dev->base_addr;
@@ -1204,9 +1195,9 @@ el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
{
u16 tmp;
int ioaddr = dev->base_addr;
-
+
EL3WINDOW(0);
- /* obtain current transceiver via WN4_MEDIA? */
+ /* obtain current transceiver via WN4_MEDIA? */
tmp = inw(ioaddr + WN0_ADDR_CONF);
ecmd->transceiver = XCVR_INTERNAL;
switch (tmp >> 14) {
@@ -1349,7 +1340,7 @@ static void el3_set_msglevel(struct net_device *dev, u32 v)
el3_debug = v;
}
-static struct ethtool_ops ethtool_ops = {
+static const struct ethtool_ops ethtool_ops = {
.get_drvinfo = el3_get_drvinfo,
.get_settings = el3_get_settings,
.set_settings = el3_set_settings,
@@ -1391,7 +1382,7 @@ el3_up(struct net_device *dev)
{
int i, sw_info, net_diag;
int ioaddr = dev->base_addr;
-
+
/* Activating the board required and does no harm otherwise */
outw(0x0001, ioaddr + 4);
@@ -1411,7 +1402,7 @@ el3_up(struct net_device *dev)
/* Combine secondary sw_info word (the adapter level) and primary
sw_info word (duplex setting plus other useless bits) */
EL3WINDOW(0);
- sw_info = (read_eeprom(ioaddr, 0x14) & 0x400f) |
+ sw_info = (read_eeprom(ioaddr, 0x14) & 0x400f) |
(read_eeprom(ioaddr, 0x0d) & 0xBff0);
EL3WINDOW(4);
@@ -1483,7 +1474,7 @@ el3_suspend(struct device *pdev, pm_message_t state)
struct net_device *dev;
struct el3_private *lp;
int ioaddr;
-
+
dev = pdev->driver_data;
lp = netdev_priv(dev);
ioaddr = dev->base_addr;
@@ -1507,7 +1498,7 @@ el3_resume(struct device *pdev)
struct net_device *dev;
struct el3_private *lp;
int ioaddr;
-
+
dev = pdev->driver_data;
lp = netdev_priv(dev);
ioaddr = dev->base_addr;
@@ -1519,7 +1510,7 @@ el3_resume(struct device *pdev)
if (netif_running(dev))
netif_device_attach(dev);
-
+
spin_unlock_irqrestore(&lp->lock, flags);
return 0;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 11:42:43 +0000