aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/3c59x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/3c59x.c')
-rw-r--r--drivers/net/3c59x.c216
1 files changed, 105 insertions, 111 deletions
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index c5669840242..c34aee91250 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -828,14 +828,14 @@ static int vortex_resume(struct pci_dev *pdev)
pci_restore_state(pdev);
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_WARNING "%s: Could not enable device \n",
+ pr_warning("%s: Could not enable device\n",
dev->name);
return err;
}
pci_set_master(pdev);
if (request_irq(dev->irq, vp->full_bus_master_rx ?
&boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev)) {
- printk(KERN_WARNING "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
+ pr_warning("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
pci_disable_device(pdev);
return -EBUSY;
}
@@ -894,7 +894,7 @@ static int __devexit vortex_eisa_remove(struct device *device)
dev = eisa_get_drvdata(edev);
if (!dev) {
- printk("vortex_eisa_remove called for Compaq device!\n");
+ pr_err("vortex_eisa_remove called for Compaq device!\n");
BUG();
}
@@ -1051,7 +1051,7 @@ static int __devinit vortex_probe1(struct device *gendev,
struct eisa_device *edev = NULL;
if (!printed_version) {
- printk (version);
+ pr_info("%s", version);
printed_version = 1;
}
@@ -1068,7 +1068,7 @@ static int __devinit vortex_probe1(struct device *gendev,
dev = alloc_etherdev(sizeof(*vp));
retval = -ENOMEM;
if (!dev) {
- printk (KERN_ERR PFX "unable to allocate etherdev, aborting\n");
+ pr_err(PFX "unable to allocate etherdev, aborting\n");
goto out;
}
SET_NETDEV_DEV(dev, gendev);
@@ -1100,9 +1100,9 @@ static int __devinit vortex_probe1(struct device *gendev,
print_info = (vortex_debug > 1);
if (print_info)
- printk (KERN_INFO "See Documentation/networking/vortex.txt\n");
+ pr_info("See Documentation/networking/vortex.txt\n");
- printk(KERN_INFO "%s: 3Com %s %s at %p.\n",
+ pr_info("%s: 3Com %s %s at %p.\n",
print_name,
pdev ? "PCI" : "EISA",
vci->name,
@@ -1144,10 +1144,9 @@ static int __devinit vortex_probe1(struct device *gendev,
chip only. */
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
if (pci_latency < new_latency) {
- printk(KERN_INFO "%s: Overriding PCI latency"
- " timer (CFLT) setting of %d, new value is %d.\n",
+ pr_info("%s: Overriding PCI latency timer (CFLT) setting of %d, new value is %d.\n",
print_name, pci_latency, new_latency);
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency);
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency);
}
}
}
@@ -1236,17 +1235,17 @@ static int __devinit vortex_probe1(struct device *gendev,
checksum = (checksum ^ (checksum >> 8)) & 0xff;
}
if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO))
- printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+ pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
for (i = 0; i < 3; i++)
((__be16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
if (print_info)
- printk(" %pM", dev->dev_addr);
+ pr_cont(" %pM", dev->dev_addr);
/* Unfortunately an all zero eeprom passes the checksum and this
gets found in the wild in failure cases. Crypto is hard 8) */
if (!is_valid_ether_addr(dev->dev_addr)) {
retval = -EINVAL;
- printk(KERN_ERR "*** EEPROM MAC address is invalid.\n");
+ pr_err("*** EEPROM MAC address is invalid.\n");
goto free_ring; /* With every pack */
}
EL3WINDOW(2);
@@ -1254,17 +1253,17 @@ static int __devinit vortex_probe1(struct device *gendev,
iowrite8(dev->dev_addr[i], ioaddr + i);
if (print_info)
- printk(", IRQ %d\n", dev->irq);
+ pr_cont(", IRQ %d\n", dev->irq);
/* Tell them about an invalid IRQ. */
if (dev->irq <= 0 || dev->irq >= nr_irqs)
- printk(KERN_WARNING " *** Warning: IRQ %d is unlikely to work! ***\n",
+ pr_warning(" *** Warning: IRQ %d is unlikely to work! ***\n",
dev->irq);
EL3WINDOW(4);
step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
if (print_info) {
- printk(KERN_INFO " product code %02x%02x rev %02x.%d date %02d-"
- "%02d-%02d\n", eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
+ pr_info(" product code %02x%02x rev %02x.%d date %02d-%02d-%02d\n",
+ eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9);
}
@@ -1279,8 +1278,7 @@ static int __devinit vortex_probe1(struct device *gendev,
}
if (print_info) {
- printk(KERN_INFO "%s: CardBus functions mapped "
- "%16.16llx->%p\n",
+ pr_info("%s: CardBus functions mapped %16.16llx->%p\n",
print_name,
(unsigned long long)pci_resource_start(pdev, 2),
vp->cb_fn_base);
@@ -1307,7 +1305,7 @@ static int __devinit vortex_probe1(struct device *gendev,
if (vp->info1 & 0x8000) {
vp->full_duplex = 1;
if (print_info)
- printk(KERN_INFO "Full duplex capable\n");
+ pr_info("Full duplex capable\n");
}
{
@@ -1319,9 +1317,9 @@ static int __devinit vortex_probe1(struct device *gendev,
vp->available_media = 0x40;
config = ioread32(ioaddr + Wn3_Config);
if (print_info) {
- printk(KERN_DEBUG " Internal config register is %4.4x, "
- "transceivers %#x.\n", config, ioread16(ioaddr + Wn3_Options));
- printk(KERN_INFO " %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+ pr_debug(" Internal config register is %4.4x, transceivers %#x.\n",
+ config, ioread16(ioaddr + Wn3_Options));
+ pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
8 << RAM_SIZE(config),
RAM_WIDTH(config) ? "word" : "byte",
ram_split[RAM_SPLIT(config)],
@@ -1336,7 +1334,7 @@ static int __devinit vortex_probe1(struct device *gendev,
}
if (vp->media_override != 7) {
- printk(KERN_INFO "%s: Media override to transceiver type %d (%s).\n",
+ pr_info("%s: Media override to transceiver type %d (%s).\n",
print_name, vp->media_override,
media_tbl[vp->media_override].name);
dev->if_port = vp->media_override;
@@ -1369,8 +1367,8 @@ static int __devinit vortex_probe1(struct device *gendev,
if (mii_status && mii_status != 0xffff) {
vp->phys[phy_idx++] = phyx;
if (print_info) {
- printk(KERN_INFO " MII transceiver found at address %d,"
- " status %4x.\n", phyx, mii_status);
+ pr_info(" MII transceiver found at address %d, status %4x.\n",
+ phyx, mii_status);
}
if ((mii_status & 0x0040) == 0)
mii_preamble_required++;
@@ -1378,7 +1376,7 @@ static int __devinit vortex_probe1(struct device *gendev,
}
mii_preamble_required--;
if (phy_idx == 0) {
- printk(KERN_WARNING" ***WARNING*** No MII transceivers found!\n");
+ pr_warning(" ***WARNING*** No MII transceivers found!\n");
vp->phys[0] = 24;
} else {
vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE);
@@ -1394,7 +1392,7 @@ static int __devinit vortex_probe1(struct device *gendev,
if (vp->capabilities & CapBusMaster) {
vp->full_bus_master_tx = 1;
if (print_info) {
- printk(KERN_INFO " Enabling bus-master transmits and %s receives.\n",
+ pr_info(" Enabling bus-master transmits and %s receives.\n",
(vp->info2 & 1) ? "early" : "whole-frame" );
}
vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2;
@@ -1414,7 +1412,7 @@ static int __devinit vortex_probe1(struct device *gendev,
dev->netdev_ops = &vortex_netdev_ops;
if (print_info) {
- printk(KERN_INFO "%s: scatter/gather %sabled. h/w checksums %sabled\n",
+ pr_info("%s: scatter/gather %sabled. h/w checksums %sabled\n",
print_name,
(dev->features & NETIF_F_SG) ? "en":"dis",
(dev->features & NETIF_F_IP_CSUM) ? "en":"dis");
@@ -1442,7 +1440,7 @@ free_region:
if (vp->must_free_region)
release_region(dev->base_addr, vci->io_size);
free_netdev(dev);
- printk(KERN_ERR PFX "vortex_probe1 fails. Returns %d\n", retval);
+ pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval);
out:
return retval;
}
@@ -1464,13 +1462,13 @@ issue_and_wait(struct net_device *dev, int cmd)
for (i = 0; i < 100000; i++) {
if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) {
if (vortex_debug > 1)
- printk(KERN_INFO "%s: command 0x%04x took %d usecs\n",
+ pr_info("%s: command 0x%04x took %d usecs\n",
dev->name, cmd, i * 10);
return;
}
udelay(10);
}
- printk(KERN_ERR "%s: command 0x%04x did not complete! Status=0x%x\n",
+ pr_err("%s: command 0x%04x did not complete! Status=0x%x\n",
dev->name, cmd, ioread16(ioaddr + EL3_STATUS));
}
@@ -1480,7 +1478,7 @@ vortex_set_duplex(struct net_device *dev)
struct vortex_private *vp = netdev_priv(dev);
void __iomem *ioaddr = vp->ioaddr;
- printk(KERN_INFO "%s: setting %s-duplex.\n",
+ pr_info("%s: setting %s-duplex.\n",
dev->name, (vp->full_duplex) ? "full" : "half");
EL3WINDOW(3);
@@ -1522,7 +1520,7 @@ vortex_up(struct net_device *dev)
pci_restore_state(VORTEX_PCI(vp));
err = pci_enable_device(VORTEX_PCI(vp));
if (err) {
- printk(KERN_WARNING "%s: Could not enable device \n",
+ pr_warning("%s: Could not enable device\n",
dev->name);
goto err_out;
}
@@ -1533,14 +1531,14 @@ vortex_up(struct net_device *dev)
config = ioread32(ioaddr + Wn3_Config);
if (vp->media_override != 7) {
- printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
+ pr_info("%s: Media override to transceiver %d (%s).\n",
dev->name, vp->media_override,
media_tbl[vp->media_override].name);
dev->if_port = vp->media_override;
} else if (vp->autoselect) {
if (vp->has_nway) {
if (vortex_debug > 1)
- printk(KERN_INFO "%s: using NWAY device table, not %d\n",
+ pr_info("%s: using NWAY device table, not %d\n",
dev->name, dev->if_port);
dev->if_port = XCVR_NWAY;
} else {
@@ -1549,13 +1547,13 @@ vortex_up(struct net_device *dev)
while (! (vp->available_media & media_tbl[dev->if_port].mask))
dev->if_port = media_tbl[dev->if_port].next;
if (vortex_debug > 1)
- printk(KERN_INFO "%s: first available media type: %s\n",
+ pr_info("%s: first available media type: %s\n",
dev->name, media_tbl[dev->if_port].name);
}
} else {
dev->if_port = vp->default_media;
if (vortex_debug > 1)
- printk(KERN_INFO "%s: using default media %s\n",
+ pr_info("%s: using default media %s\n",
dev->name, media_tbl[dev->if_port].name);
}
@@ -1570,13 +1568,13 @@ vortex_up(struct net_device *dev)
vp->rx_oom_timer.function = rx_oom_timer;
if (vortex_debug > 1)
- printk(KERN_DEBUG "%s: Initial media type %s.\n",
+ pr_debug("%s: Initial media type %s.\n",
dev->name, media_tbl[dev->if_port].name);
vp->full_duplex = vp->mii.force_media;
config = BFINS(config, dev->if_port, 20, 4);
if (vortex_debug > 6)
- printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config);
+ pr_debug("vortex_up(): writing 0x%x to InternalConfig\n", config);
iowrite32(config, ioaddr + Wn3_Config);
if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
@@ -1602,7 +1600,7 @@ vortex_up(struct net_device *dev)
if (vortex_debug > 1) {
EL3WINDOW(4);
- printk(KERN_DEBUG "%s: vortex_up() irq %d media status %4.4x.\n",
+ pr_debug("%s: vortex_up() irq %d media status %4.4x.\n",
dev->name, dev->irq, ioread16(ioaddr + Wn4_Media));
}
@@ -1704,13 +1702,13 @@ vortex_open(struct net_device *dev)
/* Use the now-standard shared IRQ implementation. */
if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ?
&boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev))) {
- printk(KERN_ERR "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
+ pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
goto err;
}
if (vp->full_bus_master_rx) { /* Boomerang bus master. */
if (vortex_debug > 2)
- printk(KERN_DEBUG "%s: Filling in the Rx ring.\n", dev->name);
+ pr_debug("%s: Filling in the Rx ring.\n", dev->name);
for (i = 0; i < RX_RING_SIZE; i++) {
struct sk_buff *skb;
vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1));
@@ -1728,7 +1726,7 @@ vortex_open(struct net_device *dev)
}
if (i != RX_RING_SIZE) {
int j;
- printk(KERN_EMERG "%s: no memory for rx ring\n", dev->name);
+ pr_emerg("%s: no memory for rx ring\n", dev->name);
for (j = 0; j < i; j++) {
if (vp->rx_skbuff[j]) {
dev_kfree_skb(vp->rx_skbuff[j]);
@@ -1750,7 +1748,7 @@ err_free_irq:
free_irq(dev->irq, dev);
err:
if (vortex_debug > 1)
- printk(KERN_ERR "%s: vortex_open() fails: returning %d\n", dev->name, retval);
+ pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval);
out:
return retval;
}
@@ -1766,9 +1764,9 @@ vortex_timer(unsigned long data)
int media_status, old_window;
if (vortex_debug > 2) {
- printk(KERN_DEBUG "%s: Media selection timer tick happened, %s.\n",
+ pr_debug("%s: Media selection timer tick happened, %s.\n",
dev->name, media_tbl[dev->if_port].name);
- printk(KERN_DEBUG "dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
+ pr_debug("dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
}
disable_irq_lockdep(dev->irq);
@@ -1781,12 +1779,12 @@ vortex_timer(unsigned long data)
netif_carrier_on(dev);
ok = 1;
if (vortex_debug > 1)
- printk(KERN_DEBUG "%s: Media %s has link beat, %x.\n",
+ pr_debug("%s: Media %s has link beat, %x.\n",
dev->name, media_tbl[dev->if_port].name, media_status);
} else {
netif_carrier_off(dev);
if (vortex_debug > 1) {
- printk(KERN_DEBUG "%s: Media %s has no link beat, %x.\n",
+ pr_debug("%s: Media %s has no link beat, %x.\n",
dev->name, media_tbl[dev->if_port].name, media_status);
}
}
@@ -1802,7 +1800,7 @@ vortex_timer(unsigned long data)
break;
default: /* Other media types handled by Tx timeouts. */
if (vortex_debug > 1)
- printk(KERN_DEBUG "%s: Media %s has no indication, %x.\n",
+ pr_debug("%s: Media %s has no indication, %x.\n",
dev->name, media_tbl[dev->if_port].name, media_status);
ok = 1;
}
@@ -1822,13 +1820,11 @@ vortex_timer(unsigned long data)
if (dev->if_port == XCVR_Default) { /* Go back to default. */
dev->if_port = vp->default_media;
if (vortex_debug > 1)
- printk(KERN_DEBUG "%s: Media selection failing, using default "
- "%s port.\n",
+ pr_debug("%s: Media selection failing, using default %s port.\n",
dev->name, media_tbl[dev->if_port].name);
} else {
if (vortex_debug > 1)
- printk(KERN_DEBUG "%s: Media selection failed, now trying "
- "%s port.\n",
+ pr_debug("%s: Media selection failed, now trying %s port.\n",
dev->name, media_tbl[dev->if_port].name);
next_tick = media_tbl[dev->if_port].wait;
}
@@ -1843,13 +1839,13 @@ vortex_timer(unsigned long data)
iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
ioaddr + EL3_CMD);
if (vortex_debug > 1)
- printk(KERN_DEBUG "wrote 0x%08x to Wn3_Config\n", config);
+ pr_debug("wrote 0x%08x to Wn3_Config\n", config);
/* AKPM: FIXME: Should reset Rx & Tx here. P60 of 3c90xc.pdf */
}
leave_media_alone:
if (vortex_debug > 2)
- printk(KERN_DEBUG "%s: Media selection timer finished, %s.\n",
+ pr_debug("%s: Media selection timer finished, %s.\n",
dev->name, media_tbl[dev->if_port].name);
EL3WINDOW(old_window);
@@ -1865,21 +1861,21 @@ static void vortex_tx_timeout(struct net_device *dev)
struct vortex_private *vp = netdev_priv(dev);
void __iomem *ioaddr = vp->ioaddr;
- printk(KERN_ERR "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+ pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
dev->name, ioread8(ioaddr + TxStatus),
ioread16(ioaddr + EL3_STATUS));
EL3WINDOW(4);
- printk(KERN_ERR " diagnostics: net %04x media %04x dma %08x fifo %04x\n",
+ pr_err(" diagnostics: net %04x media %04x dma %08x fifo %04x\n",
ioread16(ioaddr + Wn4_NetDiag),
ioread16(ioaddr + Wn4_Media),
ioread32(ioaddr + PktStatus),
ioread16(ioaddr + Wn4_FIFODiag));
/* Slight code bloat to be user friendly. */
if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88)
- printk(KERN_ERR "%s: Transmitter encountered 16 collisions --"
+ pr_err("%s: Transmitter encountered 16 collisions --"
" network cable problem?\n", dev->name);
if (ioread16(ioaddr + EL3_STATUS) & IntLatch) {
- printk(KERN_ERR "%s: Interrupt posted but not delivered --"
+ pr_err("%s: Interrupt posted but not delivered --"
" IRQ blocked by another device?\n", dev->name);
/* Bad idea here.. but we might as well handle a few events. */
{
@@ -1903,7 +1899,7 @@ static void vortex_tx_timeout(struct net_device *dev)
dev->stats.tx_errors++;
if (vp->full_bus_master_tx) {
- printk(KERN_DEBUG "%s: Resetting the Tx ring pointer.\n", dev->name);
+ pr_debug("%s: Resetting the Tx ring pointer.\n", dev->name);
if (vp->cur_tx - vp->dirty_tx > 0 && ioread32(ioaddr + DownListPtr) == 0)
iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc),
ioaddr + DownListPtr);
@@ -1938,7 +1934,7 @@ vortex_error(struct net_device *dev, int status)
unsigned char tx_status = 0;
if (vortex_debug > 2) {
- printk(KERN_ERR "%s: vortex_error(), status=0x%x\n", dev->name, status);
+ pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status);
}
if (status & TxComplete) { /* Really "TxError" for us. */
@@ -1946,10 +1942,10 @@ vortex_error(struct net_device *dev, int status)
/* Presumably a tx-timeout. We must merely re-enable. */
if (vortex_debug > 2
|| (tx_status != 0x88 && vortex_debug > 0)) {
- printk(KERN_ERR "%s: Transmit error, Tx status register %2.2x.\n",
+ pr_err("%s: Transmit error, Tx status register %2.2x.\n",
dev->name, tx_status);
if (tx_status == 0x82) {
- printk(KERN_ERR "Probably a duplex mismatch. See "
+ pr_err("Probably a duplex mismatch. See "
"Documentation/networking/vortex.txt\n");
}
dump_tx_ring(dev);
@@ -1975,13 +1971,13 @@ vortex_error(struct net_device *dev, int status)
if (status & StatsFull) { /* Empty statistics. */
static int DoneDidThat;
if (vortex_debug > 4)
- printk(KERN_DEBUG "%s: Updating stats.\n", dev->name);
+ pr_debug("%s: Updating stats.\n", dev->name);
update_stats(ioaddr, dev);
/* HACK: Disable statistics as an interrupt source. */
/* This occurs when we have the wrong media type! */
if (DoneDidThat == 0 &&
ioread16(ioaddr + EL3_STATUS) & StatsFull) {
- printk(KERN_WARNING "%s: Updating statistics failed, disabling "
+ pr_warning("%s: Updating statistics failed, disabling "
"stats as an interrupt source.\n", dev->name);
EL3WINDOW(5);
iowrite16(SetIntrEnb | (ioread16(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD);
@@ -1998,7 +1994,7 @@ vortex_error(struct net_device *dev, int status)
u16 fifo_diag;
EL3WINDOW(4);
fifo_diag = ioread16(ioaddr + Wn4_FIFODiag);
- printk(KERN_ERR "%s: Host error, FIFO diagnostic register %4.4x.\n",
+ pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n",
dev->name, fifo_diag);
/* Adapter failure requires Tx/Rx reset and reinit. */
if (vp->full_bus_master_tx) {
@@ -2006,7 +2002,7 @@ vortex_error(struct net_device *dev, int status)
/* 0x80000000 PCI master abort. */
/* 0x40000000 PCI target abort. */
if (vortex_debug)
- printk(KERN_ERR "%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);
+ pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);
/* In this case, blow the card away */
/* Must not enter D3 or we can't legally issue the reset! */
@@ -2075,7 +2071,7 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
while (--i > 0 && (tx_status = ioread8(ioaddr + TxStatus)) > 0) {
if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */
if (vortex_debug > 2)
- printk(KERN_DEBUG "%s: Tx error, status %2.2x.\n",
+ pr_debug("%s: Tx error, status %2.2x.\n",
dev->name, tx_status);
if (tx_status & 0x04) dev->stats.tx_fifo_errors++;
if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
@@ -2101,17 +2097,17 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
unsigned long flags;
if (vortex_debug > 6) {
- printk(KERN_DEBUG "boomerang_start_xmit()\n");
- printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n",
+ pr_debug("boomerang_start_xmit()\n");
+ pr_debug("%s: Trying to send a packet, Tx index %d.\n",
dev->name, vp->cur_tx);
}
if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) {
if (vortex_debug > 0)
- printk(KERN_WARNING "%s: BUG! Tx Ring full, refusing to send buffer.\n",
+ pr_warning("%s: BUG! Tx Ring full, refusing to send buffer.\n",
dev->name);
netif_stop_queue(dev);
- return 1;
+ return NETDEV_TX_BUSY;
}
vp->tx_skbuff[entry] = skb;
@@ -2204,7 +2200,7 @@ vortex_interrupt(int irq, void *dev_id)
status = ioread16(ioaddr + EL3_STATUS);
if (vortex_debug > 6)
- printk("vortex_interrupt(). status=0x%4x\n", status);
+ pr_debug("vortex_interrupt(). status=0x%4x\n", status);
if ((status & IntLatch) == 0)
goto handler_exit; /* No interrupt: shared IRQs cause this */
@@ -2219,19 +2215,19 @@ vortex_interrupt(int irq, void *dev_id)
goto handler_exit;
if (vortex_debug > 4)
- printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
+ pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
dev->name, status, ioread8(ioaddr + Timer));
do {
if (vortex_debug > 5)
- printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n",
+ pr_debug("%s: In interrupt loop, status %4.4x.\n",
dev->name, status);
if (status & RxComplete)
vortex_rx(dev);
if (status & TxAvailable) {
if (vortex_debug > 5)
- printk(KERN_DEBUG " TX room bit was handled.\n");
+ pr_debug(" TX room bit was handled.\n");
/* There's room in the FIFO for a full-sized packet. */
iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD);
netif_wake_queue (dev);
@@ -2263,8 +2259,8 @@ vortex_interrupt(int irq, void *dev_id)
}
if (--work_done < 0) {
- printk(KERN_WARNING "%s: Too much work in interrupt, status "
- "%4.4x.\n", dev->name, status);
+ pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
+ dev->name, status);
/* Disable all pending interrupts. */
do {
vp->deferred |= status;
@@ -2281,7 +2277,7 @@ vortex_interrupt(int irq, void *dev_id)
} while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
if (vortex_debug > 4)
- printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
+ pr_debug("%s: exiting interrupt, status %4.4x.\n",
dev->name, status);
handler_exit:
spin_unlock(&vp->lock);
@@ -2313,14 +2309,14 @@ boomerang_interrupt(int irq, void *dev_id)
status = ioread16(ioaddr + EL3_STATUS);
if (vortex_debug > 6)
- printk(KERN_DEBUG "boomerang_interrupt. status=0x%4x\n", status);
+ pr_debug("boomerang_interrupt. status=0x%4x\n", status);
if ((status & IntLatch) == 0)
goto handler_exit; /* No interrupt: shared IRQs can cause this */
if (status == 0xffff) { /* h/w no longer present (hotplug)? */
if (vortex_debug > 1)
- printk(KERN_DEBUG "boomerang_interrupt(1): status = 0xffff\n");
+ pr_debug("boomerang_interrupt(1): status = 0xffff\n");
goto handler_exit;
}
@@ -2330,16 +2326,16 @@ boomerang_interrupt(int irq, void *dev_id)
}
if (vortex_debug > 4)
- printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
+ pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
dev->name, status, ioread8(ioaddr + Timer));
do {
if (vortex_debug > 5)
- printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n",
+ pr_debug("%s: In interrupt loop, status %4.4x.\n",
dev->name, status);
if (status & UpComplete) {
iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD);
if (vortex_debug > 5)
- printk(KERN_DEBUG "boomerang_interrupt->boomerang_rx\n");
+ pr_debug("boomerang_interrupt->boomerang_rx\n");
boomerang_rx(dev);
}
@@ -2374,7 +2370,7 @@ boomerang_interrupt(int irq, void *dev_id)
dev_kfree_skb_irq(skb);
vp->tx_skbuff[entry] = NULL;
} else {
- printk(KERN_DEBUG "boomerang_interrupt: no skb!\n");
+ pr_debug("boomerang_interrupt: no skb!\n");
}
/* dev->stats.tx_packets++; Counted below. */
dirty_tx++;
@@ -2382,7 +2378,7 @@ boomerang_interrupt(int irq, void *dev_id)
vp->dirty_tx = dirty_tx;
if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) {
if (vortex_debug > 6)
- printk(KERN_DEBUG "boomerang_interrupt: wake queue\n");
+ pr_debug("boomerang_interrupt: wake queue\n");
netif_wake_queue (dev);
}
}
@@ -2392,8 +2388,8 @@ boomerang_interrupt(int irq, void *dev_id)
vortex_error(dev, status);
if (--work_done < 0) {
- printk(KERN_WARNING "%s: Too much work in interrupt, status "
- "%4.4x.\n", dev->name, status);
+ pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
+ dev->name, status);
/* Disable all pending interrupts. */
do {
vp->deferred |= status;
@@ -2413,7 +2409,7 @@ boomerang_interrupt(int irq, void *dev_id)
} while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch);
if (vortex_debug > 4)
- printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
+ pr_debug("%s: exiting interrupt, status %4.4x.\n",
dev->name, status);
handler_exit:
spin_unlock(&vp->lock);
@@ -2428,13 +2424,13 @@ static int vortex_rx(struct net_device *dev)
short rx_status;
if (vortex_debug > 5)
- printk(KERN_DEBUG "vortex_rx(): status %4.4x, rx_status %4.4x.\n",
+ pr_debug("vortex_rx(): status %4.4x, rx_status %4.4x.\n",
ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus));
while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) {
if (rx_status & 0x4000) { /* Error, update stats. */
unsigned char rx_error = ioread8(ioaddr + RxErrors);
if (vortex_debug > 2)
- printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
+ pr_debug(" Rx error: status %2.2x.\n", rx_error);
dev->stats.rx_errors++;
if (rx_error & 0x01) dev->stats.rx_over_errors++;
if (rx_error & 0x02) dev->stats.rx_length_errors++;
@@ -2448,7 +2444,7 @@ static int vortex_rx(struct net_device *dev)
skb = dev_alloc_skb(pkt_len + 5);
if (vortex_debug > 4)
- printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n",
+ pr_debug("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
if (skb != NULL) {
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
@@ -2478,8 +2474,8 @@ static int vortex_rx(struct net_device *dev)
break;
continue;
} else if (vortex_debug > 0)
- printk(KERN_NOTICE "%s: No memory to allocate a sk_buff of "
- "size %d.\n", dev->name, pkt_len);
+ pr_notice("%s: No memory to allocate a sk_buff of size %d.\n",
+ dev->name, pkt_len);
dev->stats.rx_dropped++;
}
issue_and_wait(dev, RxDiscard);
@@ -2498,7 +2494,7 @@ boomerang_rx(struct net_device *dev)
int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx;
if (vortex_debug > 5)
- printk(KERN_DEBUG "boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
+ pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){
if (--rx_work_limit < 0)
@@ -2506,7 +2502,7 @@ boomerang_rx(struct net_device *dev)
if (rx_status & RxDError) { /* Error, update stats. */
unsigned char rx_error = rx_status >> 16;
if (vortex_debug > 2)
- printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
+ pr_debug(" Rx error: status %2.2x.\n", rx_error);
dev->stats.rx_errors++;
if (rx_error & 0x01) dev->stats.rx_over_errors++;
if (rx_error & 0x02) dev->stats.rx_length_errors++;
@@ -2520,7 +2516,7 @@ boomerang_rx(struct net_device *dev)
dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr);
if (vortex_debug > 4)
- printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n",
+ pr_debug("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
/* Check if the packet is long enough to just accept without
@@ -2566,7 +2562,7 @@ boomerang_rx(struct net_device *dev)
if (skb == NULL) {
static unsigned long last_jif;
if (time_after(jiffies, last_jif + 10 * HZ)) {
- printk(KERN_WARNING "%s: memory shortage\n", dev->name);
+ pr_warning("%s: memory shortage\n", dev->name);
last_jif = jiffies;
}
if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE)
@@ -2598,7 +2594,7 @@ rx_oom_timer(unsigned long arg)
if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) /* This test is redundant, but makes me feel good */
boomerang_rx(dev);
if (vortex_debug > 1) {
- printk(KERN_DEBUG "%s: rx_oom_timer %s\n", dev->name,
+ pr_debug("%s: rx_oom_timer %s\n", dev->name,
((vp->cur_rx - vp->dirty_rx) != RX_RING_SIZE) ? "succeeded" : "retrying");
}
spin_unlock_irq(&vp->lock);
@@ -2655,9 +2651,9 @@ vortex_close(struct net_device *dev)
vortex_down(dev, 1);
if (vortex_debug > 1) {
- printk(KERN_DEBUG"%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
+ pr_debug("%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus));
- printk(KERN_DEBUG "%s: vortex close stats: rx_nocopy %d rx_copy %d"
+ pr_debug("%s: vortex close stats: rx_nocopy %d rx_copy %d"
" tx_queued %d Rx pre-checksummed %d.\n",
dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits);
}
@@ -2666,8 +2662,7 @@ vortex_close(struct net_device *dev)
if (vp->rx_csumhits &&
(vp->drv_flags & HAS_HWCKSM) == 0 &&
(vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) {
- printk(KERN_WARNING "%s supports hardware checksums, and we're "
- "not using them!\n", dev->name);
+ pr_warning("%s supports hardware checksums, and we're not using them!\n", dev->name);
}
#endif
@@ -2717,16 +2712,16 @@ dump_tx_ring(struct net_device *dev)
int i;
int stalled = ioread32(ioaddr + PktStatus) & 0x04; /* Possible racy. But it's only debug stuff */
- printk(KERN_ERR " Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
+ pr_err(" Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
vp->full_bus_master_tx,
vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE,
vp->cur_tx, vp->cur_tx % TX_RING_SIZE);
- printk(KERN_ERR " Transmit list %8.8x vs. %p.\n",
+ pr_err(" Transmit list %8.8x vs. %p.\n",
ioread32(ioaddr + DownListPtr),
&vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
issue_and_wait(dev, DownStall);
for (i = 0; i < TX_RING_SIZE; i++) {
- printk(KERN_ERR " %d: @%p length %8.8x status %8.8x\n", i,
+ pr_err(" %d: @%p length %8.8x status %8.8x\n", i,
&vp->tx_ring[i],
#if DO_ZEROCOPY
le32_to_cpu(vp->tx_ring[i].frag[0].length),
@@ -2970,7 +2965,7 @@ static void set_rx_mode(struct net_device *dev)
if (dev->flags & IFF_PROMISC) {
if (vortex_debug > 3)
- printk(KERN_NOTICE "%s: Setting promiscuous mode.\n", dev->name);
+ pr_notice("%s: Setting promiscuous mode.\n", dev->name);
new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm;
} else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) {
new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast;
@@ -3145,8 +3140,7 @@ static void acpi_set_WOL(struct net_device *dev)
iowrite16(RxEnable, ioaddr + EL3_CMD);
if (pci_enable_wake(VORTEX_PCI(vp), PCI_D3hot, 1)) {
- printk(KERN_INFO "%s: WOL not supported.\n",
- pci_name(VORTEX_PCI(vp)));
+ pr_info("%s: WOL not supported.\n", pci_name(VORTEX_PCI(vp)));
vp->enable_wol = 0;
return;
@@ -3164,7 +3158,7 @@ static void __devexit vortex_remove_one(struct pci_dev *pdev)
struct vortex_private *vp;
if (!dev) {
- printk("vortex_remove_one called for Compaq device!\n");
+ pr_err("vortex_remove_one called for Compaq device!\n");
BUG();
}