diff options
Diffstat (limited to 'drivers/net/atlx/atl1.c')
| -rw-r--r-- | drivers/net/atlx/atl1.c | 157 |
1 files changed, 98 insertions, 59 deletions
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 0afe522b8f7..9c2394d4942 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -1,7 +1,7 @@ /* * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com> - * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com> + * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com> * * Derived from Intel e1000 driver * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. @@ -36,7 +36,6 @@ * A very incomplete list of things that need to be dealt with: * * TODO: - * Wake on LAN. * Add more ethtool functions. * Fix abstruse irq enable/disable condition described here: * http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2 @@ -638,21 +637,18 @@ static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) } /* - *TODO: do something or get rid of this + * Force the PHY into power saving mode using vendor magic. */ #ifdef CONFIG_PM -static s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) +static void atl1_phy_enter_power_saving(struct atl1_hw *hw) { -/* s32 ret_val; - * u16 phy_data; - */ + atl1_write_phy_reg(hw, MII_DBG_ADDR, 0); + atl1_write_phy_reg(hw, MII_DBG_DATA, 0x124E); + atl1_write_phy_reg(hw, MII_DBG_ADDR, 2); + atl1_write_phy_reg(hw, MII_DBG_DATA, 0x3000); + atl1_write_phy_reg(hw, MII_DBG_ADDR, 3); + atl1_write_phy_reg(hw, MII_DBG_DATA, 0); -/* - ret_val = atl1_write_phy_reg(hw, ...); - ret_val = atl1_write_phy_reg(hw, ...); - .... -*/ - return 0; } #endif @@ -2784,64 +2780,93 @@ static int atl1_suspend(struct pci_dev *pdev, pm_message_t state) struct atl1_hw *hw = &adapter->hw; u32 ctrl = 0; u32 wufc = adapter->wol; + u32 val; + int retval; + u16 speed; + u16 duplex; netif_device_detach(netdev); if (netif_running(netdev)) atl1_down(adapter); + retval = pci_save_state(pdev); + if (retval) + return retval; + atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); - if (ctrl & BMSR_LSTATUS) + val = ctrl & BMSR_LSTATUS; + if (val) wufc &= ~ATLX_WUFC_LNKC; - /* reduce speed to 10/100M */ - if (wufc) { - atl1_phy_enter_power_saving(hw); - /* if resume, let driver to re- setup link */ - hw->phy_configured = false; - atl1_set_mac_addr(hw); - atlx_set_multi(netdev); + if (val && wufc) { + val = atl1_get_speed_and_duplex(hw, &speed, &duplex); + if (val) { + if (netif_msg_ifdown(adapter)) + dev_printk(KERN_DEBUG, &pdev->dev, + "error getting speed/duplex\n"); + goto disable_wol; + } ctrl = 0; - /* turn on magic packet wol */ - if (wufc & ATLX_WUFC_MAG) - ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN; - /* turn on Link change WOL */ - if (wufc & ATLX_WUFC_LNKC) - ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); + /* enable magic packet WOL */ + if (wufc & ATLX_WUFC_MAG) + ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN); iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); - - /* turn on all-multi mode if wake on multicast is enabled */ - ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL); - ctrl &= ~MAC_CTRL_DBG; - ctrl &= ~MAC_CTRL_PROMIS_EN; - if (wufc & ATLX_WUFC_MC) - ctrl |= MAC_CTRL_MC_ALL_EN; - else - ctrl &= ~MAC_CTRL_MC_ALL_EN; - - /* turn on broadcast mode if wake on-BC is enabled */ - if (wufc & ATLX_WUFC_BC) + ioread32(hw->hw_addr + REG_WOL_CTRL); + + /* configure the mac */ + ctrl = MAC_CTRL_RX_EN; + ctrl |= ((u32)((speed == SPEED_1000) ? MAC_CTRL_SPEED_1000 : + MAC_CTRL_SPEED_10_100) << MAC_CTRL_SPEED_SHIFT); + if (duplex == FULL_DUPLEX) + ctrl |= MAC_CTRL_DUPLX; + ctrl |= (((u32)adapter->hw.preamble_len & + MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); + if (adapter->vlgrp) + ctrl |= MAC_CTRL_RMV_VLAN; + if (wufc & ATLX_WUFC_MAG) ctrl |= MAC_CTRL_BC_EN; - else - ctrl &= ~MAC_CTRL_BC_EN; - - /* enable RX */ - ctrl |= MAC_CTRL_RX_EN; iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } else { - iowrite32(0, hw->hw_addr + REG_WOL_CTRL); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); + ioread32(hw->hw_addr + REG_MAC_CTRL); + + /* poke the PHY */ + ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC); + ioread32(hw->hw_addr + REG_PCIE_PHYMISC); + + pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); + goto exit; } - pci_save_state(pdev); + if (!val && wufc) { + ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); + iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); + ioread32(hw->hw_addr + REG_WOL_CTRL); + iowrite32(0, hw->hw_addr + REG_MAC_CTRL); + ioread32(hw->hw_addr + REG_MAC_CTRL); + hw->phy_configured = false; + pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); + goto exit; + } + +disable_wol: + iowrite32(0, hw->hw_addr + REG_WOL_CTRL); + ioread32(hw->hw_addr + REG_WOL_CTRL); + ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC); + ioread32(hw->hw_addr + REG_PCIE_PHYMISC); + atl1_phy_enter_power_saving(hw); + hw->phy_configured = false; + pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); +exit: + if (netif_running(netdev)) + pci_disable_msi(adapter->pdev); pci_disable_device(pdev); - - pci_set_power_state(pdev, PCI_D3hot); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); return 0; } @@ -2855,20 +2880,26 @@ static int atl1_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); - /* FIXME: check and handle */ err = pci_enable_device(pdev); + if (err) { + if (netif_msg_ifup(adapter)) + dev_printk(KERN_DEBUG, &pdev->dev, + "error enabling pci device\n"); + return err; + } + + pci_set_master(pdev); + iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); - iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); - atl1_reset(adapter); + atl1_reset_hw(&adapter->hw); + adapter->cmb.cmb->int_stats = 0; if (netif_running(netdev)) atl1_up(adapter); netif_device_attach(netdev); - atl1_via_workaround(adapter); - return 0; } #else @@ -2876,6 +2907,13 @@ static int atl1_resume(struct pci_dev *pdev) #define atl1_resume NULL #endif +static void atl1_shutdown(struct pci_dev *pdev) +{ +#ifdef CONFIG_PM + atl1_suspend(pdev, PMSG_SUSPEND); +#endif +} + #ifdef CONFIG_NET_POLL_CONTROLLER static void atl1_poll_controller(struct net_device *netdev) { @@ -3122,7 +3160,8 @@ static struct pci_driver atl1_driver = { .probe = atl1_probe, .remove = __devexit_p(atl1_remove), .suspend = atl1_suspend, - .resume = atl1_resume + .resume = atl1_resume, + .shutdown = atl1_shutdown }; /* |