diff options
Diffstat (limited to 'drivers/net/bnx2.h')
| -rw-r--r-- | drivers/net/bnx2.h | 76 |
1 files changed, 73 insertions, 3 deletions
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 49a5de253b1..102adfe1e92 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6338,6 +6338,8 @@ struct l2_fhdr { #define RX_COPY_THRESH 92 +#define BNX2_MISC_ENABLE_DEFAULT 0x7ffffff + #define DMA_READ_CHANS 5 #define DMA_WRITE_CHANS 3 @@ -6431,6 +6433,11 @@ struct sw_bd { #define ST_MICRO_FLASH_PAGE_SIZE 256 #define ST_MICRO_FLASH_BASE_TOTAL_SIZE 65536 +#define BCM5709_FLASH_PAGE_BITS 8 +#define BCM5709_FLASH_PHY_PAGE_SIZE (1 << BCM5709_FLASH_PAGE_BITS) +#define BCM5709_FLASH_BYTE_ADDR_MASK (BCM5709_FLASH_PHY_PAGE_SIZE-1) +#define BCM5709_FLASH_PAGE_SIZE 256 + #define NVRAM_TIMEOUT_COUNT 30000 @@ -6447,7 +6454,10 @@ struct flash_spec { u32 config2; u32 config3; u32 write1; - u32 buffered; + u32 flags; +#define BNX2_NV_BUFFERED 0x00000001 +#define BNX2_NV_TRANSLATE 0x00000002 +#define BNX2_NV_WREN 0x00000004 u32 page_bits; u32 page_size; u32 addr_mask; @@ -6537,6 +6547,7 @@ struct bnx2 { #define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100 #define PHY_INT_MODE_LINK_READY_FLAG 0x200 #define PHY_DIS_EARLY_DAC_FLAG 0x400 +#define REMOTE_PHY_CAP_FLAG 0x800 u32 mii_bmcr; u32 mii_bmsr; @@ -6625,6 +6636,7 @@ struct bnx2 { u16 req_line_speed; u8 req_duplex; + u8 phy_port; u8 link_up; u16 line_speed; @@ -6656,7 +6668,7 @@ struct bnx2 { u32 shmem_base; - u32 fw_ver; + char fw_version[32]; int pm_cap; int pcix_cap; @@ -6770,7 +6782,7 @@ struct fw_info { * the firmware has timed out, the driver will assume there is no firmware * running and there won't be any firmware-driver synchronization during a * driver reset. */ -#define FW_ACK_TIME_OUT_MS 100 +#define FW_ACK_TIME_OUT_MS 1000 #define BNX2_DRV_RESET_SIGNATURE 0x00000000 @@ -6788,6 +6800,7 @@ struct fw_info { #define BNX2_DRV_MSG_CODE_DIAG 0x07000000 #define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL 0x09000000 #define BNX2_DRV_MSG_CODE_UNLOAD_LNK_DN 0x0b000000 +#define BNX2_DRV_MSG_CODE_CMD_SET_LINK 0x10000000 #define BNX2_DRV_MSG_DATA 0x00ff0000 #define BNX2_DRV_MSG_DATA_WAIT0 0x00010000 @@ -6836,6 +6849,7 @@ struct fw_info { #define BNX2_LINK_STATUS_SERDES_LINK (1<<20) #define BNX2_LINK_STATUS_PARTNER_AD_2500FULL (1<<21) #define BNX2_LINK_STATUS_PARTNER_AD_2500HALF (1<<22) +#define BNX2_LINK_STATUS_HEART_BEAT_EXPIRED (1<<31) #define BNX2_DRV_PULSE_MB 0x00000010 #define BNX2_DRV_PULSE_SEQ_MASK 0x00007fff @@ -6845,6 +6859,30 @@ struct fw_info { * This is used for debugging. */ #define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE 0x00080000 +#define BNX2_DRV_MB_ARG0 0x00000014 +#define BNX2_NETLINK_SET_LINK_SPEED_10HALF (1<<0) +#define BNX2_NETLINK_SET_LINK_SPEED_10FULL (1<<1) +#define BNX2_NETLINK_SET_LINK_SPEED_10 \ + (BNX2_NETLINK_SET_LINK_SPEED_10HALF | \ + BNX2_NETLINK_SET_LINK_SPEED_10FULL) +#define BNX2_NETLINK_SET_LINK_SPEED_100HALF (1<<2) +#define BNX2_NETLINK_SET_LINK_SPEED_100FULL (1<<3) +#define BNX2_NETLINK_SET_LINK_SPEED_100 \ + (BNX2_NETLINK_SET_LINK_SPEED_100HALF | \ + BNX2_NETLINK_SET_LINK_SPEED_100FULL) +#define BNX2_NETLINK_SET_LINK_SPEED_1GHALF (1<<4) +#define BNX2_NETLINK_SET_LINK_SPEED_1GFULL (1<<5) +#define BNX2_NETLINK_SET_LINK_SPEED_2G5HALF (1<<6) +#define BNX2_NETLINK_SET_LINK_SPEED_2G5FULL (1<<7) +#define BNX2_NETLINK_SET_LINK_SPEED_10GHALF (1<<8) +#define BNX2_NETLINK_SET_LINK_SPEED_10GFULL (1<<9) +#define BNX2_NETLINK_SET_LINK_ENABLE_AUTONEG (1<<10) +#define BNX2_NETLINK_SET_LINK_PHY_APP_REMOTE (1<<11) +#define BNX2_NETLINK_SET_LINK_FC_SYM_PAUSE (1<<12) +#define BNX2_NETLINK_SET_LINK_FC_ASYM_PAUSE (1<<13) +#define BNX2_NETLINK_SET_LINK_ETH_AT_WIRESPEED (1<<14) +#define BNX2_NETLINK_SET_LINK_PHY_RESET (1<<15) + #define BNX2_DEV_INFO_SIGNATURE 0x00000020 #define BNX2_DEV_INFO_SIGNATURE_MAGIC 0x44564900 #define BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK 0xffffff00 @@ -7006,6 +7044,8 @@ struct fw_info { #define BNX2_PORT_FEATURE_MBA_VLAN_TAG_MASK 0xffff #define BNX2_PORT_FEATURE_MBA_VLAN_ENABLE 0x10000 +#define BNX2_MFW_VER_PTR 0x00000014c + #define BNX2_BC_STATE_RESET_TYPE 0x000001c0 #define BNX2_BC_STATE_RESET_TYPE_SIG 0x00005254 #define BNX2_BC_STATE_RESET_TYPE_SIG_MASK 0x0000ffff @@ -7059,12 +7099,42 @@ struct fw_info { #define BNX2_BC_STATE_ERR_NO_RXP (BNX2_BC_STATE_SIGN | 0x0600) #define BNX2_BC_STATE_ERR_TOO_MANY_RBUF (BNX2_BC_STATE_SIGN | 0x0700) +#define BNX2_BC_STATE_CONDITION 0x000001c8 +#define BNX2_CONDITION_MFW_RUN_UNKNOWN 0x00000000 +#define BNX2_CONDITION_MFW_RUN_IPMI 0x00002000 +#define BNX2_CONDITION_MFW_RUN_UMP 0x00004000 +#define BNX2_CONDITION_MFW_RUN_NCSI 0x00006000 +#define BNX2_CONDITION_MFW_RUN_NONE 0x0000e000 +#define BNX2_CONDITION_MFW_RUN_MASK 0x0000e000 + #define BNX2_BC_STATE_DEBUG_CMD 0x1dc #define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE 0x42440000 #define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE_MASK 0xffff0000 #define BNX2_BC_STATE_BC_DBG_CMD_LOOP_CNT_MASK 0xffff #define BNX2_BC_STATE_BC_DBG_CMD_LOOP_INFINITE 0xffff +#define BNX2_FW_EVT_CODE_MB 0x354 +#define BNX2_FW_EVT_CODE_SW_TIMER_EXPIRATION_EVENT 0x00000000 +#define BNX2_FW_EVT_CODE_LINK_EVENT 0x00000001 + +#define BNX2_DRV_ACK_CAP_MB 0x364 +#define BNX2_DRV_ACK_CAP_SIGNATURE 0x35450000 +#define BNX2_CAPABILITY_SIGNATURE_MASK 0xFFFF0000 + +#define BNX2_FW_CAP_MB 0x368 +#define BNX2_FW_CAP_SIGNATURE 0xaa550000 +#define BNX2_FW_ACK_DRV_SIGNATURE 0x52500000 +#define BNX2_FW_CAP_SIGNATURE_MASK 0xffff0000 +#define BNX2_FW_CAP_REMOTE_PHY_CAPABLE 0x00000001 +#define BNX2_FW_CAP_REMOTE_PHY_PRESENT 0x00000002 + +#define BNX2_RPHY_SIGNATURE 0x36c +#define BNX2_RPHY_LOAD_SIGNATURE 0x5a5a5a5a + +#define BNX2_RPHY_FLAGS 0x370 +#define BNX2_RPHY_SERDES_LINK 0x374 +#define BNX2_RPHY_COPPER_LINK 0x378 + #define HOST_VIEW_SHMEM_BASE 0x167c00 #endif |