diff options
Diffstat (limited to 'drivers/net/bnx2x_hsi.h')
| -rw-r--r-- | drivers/net/bnx2x_hsi.h | 40 |
1 files changed, 36 insertions, 4 deletions
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h index 03c62421d99..7de83c4a557 100644 --- a/drivers/net/bnx2x_hsi.h +++ b/drivers/net/bnx2x_hsi.h @@ -91,6 +91,21 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_HIDE_PORT1 0x00002000 + /* The fan failure mechanism is usually related to the PHY type + since the power consumption of the board is determined by the PHY. + Currently, fan is required for most designs with SFX7101, BCM8727 + and BCM8481. If a fan is not required for a board which uses one + of those PHYs, this field should be set to "Disabled". If a fan is + required for a different PHY type, this option should be set to + "Enabled". + The fan failure indication is expected on + SPIO5 */ +#define SHARED_HW_CFG_FAN_FAILURE_MASK 0x00180000 +#define SHARED_HW_CFG_FAN_FAILURE_SHIFT 19 +#define SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE 0x00000000 +#define SHARED_HW_CFG_FAN_FAILURE_DISABLED 0x00080000 +#define SHARED_HW_CFG_FAN_FAILURE_ENABLED 0x00100000 + u32 power_dissipated; /* 0x11c */ #define SHARED_HW_CFG_POWER_DIS_CMN_MASK 0xff000000 #define SHARED_HW_CFG_POWER_DIS_CMN_SHIFT 24 @@ -233,6 +248,8 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726 0x00000600 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481 0x00000700 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101 0x00000800 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727 0x00000900 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC 0x00000a00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00 @@ -343,10 +360,16 @@ struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */ #define PORT_FEATURE_MBA_ENABLED 0x02000000 #define PORT_FEATURE_MFW_ENABLED 0x04000000 - /* Check the optic vendor via i2c before allowing it to be used by - SW */ -#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLED 0x00000000 -#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_ENABLED 0x08000000 + /* Reserved bits: 28-29 */ + /* Check the optic vendor via i2c against a list of approved modules + in a separate nvram image */ +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK 0xE0000000 +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_SHIFT 29 +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT 0x00000000 +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER 0x20000000 +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_WARNING_MSG 0x40000000 +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN 0x60000000 + u32 wol_config; /* Default is used when driver sets to "auto" mode */ @@ -642,6 +665,12 @@ struct drv_func_mb { #define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000 #define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 #define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 + /* + * The optic module verification commands requris bootcode + * v5.0.6 or later + */ +#define DRV_MSG_CODE_VRFY_OPT_MDL 0xa0000000 +#define REQ_BC_VER_4_VRFY_OPT_MDL 0x00050006 #define BIOS_MSG_CODE_LIC_CHALLENGE 0xff010000 #define BIOS_MSG_CODE_LIC_RESPONSE 0xff020000 @@ -676,6 +705,9 @@ struct drv_func_mb { #define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x90220000 #define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x90230000 #define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x90240000 +#define FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS 0xa0100000 +#define FW_MSG_CODE_VRFY_OPT_MDL_INVLD_IMG 0xa0200000 +#define FW_MSG_CODE_VRFY_OPT_MDL_UNAPPROVED 0xa0300000 #define FW_MSG_CODE_LIC_CHALLENGE 0xff010000 #define FW_MSG_CODE_LIC_RESPONSE 0xff020000 |