diff options
Diffstat (limited to 'drivers/net/bnx2x_link.c')
| -rw-r--r-- | drivers/net/bnx2x_link.c | 498 |
1 files changed, 436 insertions, 62 deletions
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index 1f17334c8f0..9e1f19a00ab 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -37,6 +37,10 @@ /* Shortcut definitions */ /***********************************************************/ +#define NIG_LATCH_BC_ENABLE_MI_INT 0 + +#define NIG_STATUS_EMAC0_MI_INT \ + NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT #define NIG_STATUS_XGXS0_LINK10G \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G #define NIG_STATUS_XGXS0_LINK_STATUS \ @@ -1589,8 +1593,9 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params, static u8 bnx2x_link_settings_status(struct link_params *params, - struct link_vars *vars, - u32 gp_status) + struct link_vars *vars, + u32 gp_status, + u8 ext_phy_link_up) { struct bnx2x *bp = params->bp; u16 new_line_speed; @@ -1696,6 +1701,16 @@ static u8 bnx2x_link_settings_status(struct link_params *params, Comes to deals with possible FIFO glitch due to clk change when speed is decreased without link down indicator */ if (new_line_speed != vars->line_speed) { + if (XGXS_EXT_PHY_TYPE(params->ext_phy_config) != + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT && + ext_phy_link_up) { + DP(NETIF_MSG_LINK, "Internal link speed %d is" + " different than the external" + " link speed %d\n", new_line_speed, + vars->line_speed); + vars->phy_link_up = 0; + return 0; + } REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); msleep(1); @@ -1709,9 +1724,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, (XGXS_EXT_PHY_TYPE(params->ext_phy_config) == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) || (XGXS_EXT_PHY_TYPE(params->ext_phy_config) == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) || - (XGXS_EXT_PHY_TYPE(params->ext_phy_config) == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481))) { + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726))) { vars->autoneg = AUTO_NEG_ENABLED; if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) { @@ -3182,6 +3195,130 @@ static void bnx2x_set_preemphasis(struct link_params *params) } } + +static void bnx2x_8481_set_led4(struct link_params *params, + u32 ext_phy_type, u8 ext_phy_addr) +{ + struct bnx2x *bp = params->bp; + + /* PHYC_CTL_LED_CTL */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, 0xa482); + + /* Unmask LED4 for 10G link */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_SIGNAL_MASK, (1<<6)); + /* 'Interrupt Mask' */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + 0xFFFB, 0xFFFD); +} +static void bnx2x_8481_set_legacy_led_mode(struct link_params *params, + u32 ext_phy_type, u8 ext_phy_addr) +{ + struct bnx2x *bp = params->bp; + + /* LED1 (10G Link): Disable LED1 when 10/100/1000 link */ + /* LED2 (1G/100/10 Link): Enable LED2 when 10/100/1000 link) */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_SHADOW, + (1<<15) | (0xd << 10) | (0xc<<4) | 0xe); +} + +static void bnx2x_8481_set_10G_led_mode(struct link_params *params, + u32 ext_phy_type, u8 ext_phy_addr) +{ + struct bnx2x *bp = params->bp; + u16 val1; + + /* LED1 (10G Link) */ + /* Enable continuse based on source 7(10G-link) */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + &val1); + /* Set bit 2 to 0, and bits [1:0] to 10 */ + val1 &= ~((1<<0) | (1<<2)); /* Clear bits 0,2*/ + val1 |= (1<<1); /* Set bit 1 */ + + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + val1); + + /* Unmask LED1 for 10G link */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + &val1); + /* Set bit 2 to 0, and bits [1:0] to 10 */ + val1 |= (1<<7); + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + val1); + + /* LED2 (1G/100/10G Link) */ + /* Mask LED2 for 10G link */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, + 0); + + /* LED3 (10G/1G/100/10G Activity) */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + &val1); + /* Enable blink based on source 4(Activity) */ + val1 &= ~((1<<7) | (1<<8)); /* Clear bits 7,8 */ + val1 |= (1<<6); /* Set only bit 6 */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + val1); + + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + &val1); + val1 |= (1<<4); /* Unmask LED3 for 10G link */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + val1); +} + + static void bnx2x_init_internal_phy(struct link_params *params, struct link_vars *vars) { @@ -3947,16 +4084,109 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) break; } case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: - DP(NETIF_MSG_LINK, - "Setting the BCM8481 LASI control\n"); + /* This phy uses the NIG latch mechanism since link + indication arrives through its LED4 and not via + its LASI signal, so we get steady signal + instead of clear on read */ + bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4, + 1 << NIG_LATCH_BC_ENABLE_MI_INT); + + bnx2x_8481_set_led4(params, ext_phy_type, ext_phy_addr); + if (params->req_line_speed == SPEED_AUTO_NEG) { + + u16 autoneg_val, an_1000_val, an_10_100_val; + /* set 1000 speed advertisement */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1000T_CTRL, + &an_1000_val); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_CTRL, 0x1); + if (params->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) { + an_1000_val |= (1<<8); + if (params->req_duplex == DUPLEX_FULL) + an_1000_val |= (1<<9); + DP(NETIF_MSG_LINK, "Advertising 1G\n"); + } else + an_1000_val &= ~((1<<8) | (1<<9)); - /* Restart autoneg */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1000T_CTRL, + an_1000_val); + + /* set 100 speed advertisement */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_AN_ADV, + &an_10_100_val); + + if (params->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) { + an_10_100_val |= (1<<7); + if (params->req_duplex == DUPLEX_FULL) + an_10_100_val |= (1<<8); + DP(NETIF_MSG_LINK, + "Advertising 100M\n"); + } else + an_10_100_val &= ~((1<<7) | (1<<8)); + + /* set 10 speed advertisement */ + if (params->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) { + an_10_100_val |= (1<<5); + if (params->req_duplex == DUPLEX_FULL) + an_10_100_val |= (1<<6); + DP(NETIF_MSG_LINK, "Advertising 10M\n"); + } + else + an_10_100_val &= ~((1<<5) | (1<<6)); + + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_AN_ADV, + an_10_100_val); + + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, + &autoneg_val); + + /* Disable forced speed */ + autoneg_val &= ~(1<<6|1<<13); + + /* Enable autoneg and restart autoneg + for legacy speeds */ + autoneg_val |= (1<<9|1<<12); + + if (params->req_duplex == DUPLEX_FULL) + autoneg_val |= (1<<8); + else + autoneg_val &= ~(1<<8); + + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, + autoneg_val); + + if (params->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) { + DP(NETIF_MSG_LINK, "Advertising 10G\n"); + /* Restart autoneg for 10G*/ bnx2x_cl45_read(bp, params->port, ext_phy_type, ext_phy_addr, @@ -3968,6 +4198,76 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) ext_phy_addr, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, val); + } + } else { + /* Force speed */ + u16 autoneg_ctrl, pma_ctrl; + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, + &autoneg_ctrl); + + /* Disable autoneg */ + autoneg_ctrl &= ~(1<<12); + + /* Set 1000 force */ + switch (params->req_line_speed) { + case SPEED_10000: + DP(NETIF_MSG_LINK, + "Unable to set 10G force !\n"); + break; + case SPEED_1000: + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, + &pma_ctrl); + autoneg_ctrl &= ~(1<<13); + autoneg_ctrl |= (1<<6); + pma_ctrl &= ~(1<<13); + pma_ctrl |= (1<<6); + DP(NETIF_MSG_LINK, + "Setting 1000M force\n"); + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, + pma_ctrl); + break; + case SPEED_100: + autoneg_ctrl |= (1<<13); + autoneg_ctrl &= ~(1<<6); + DP(NETIF_MSG_LINK, + "Setting 100M force\n"); + break; + case SPEED_10: + autoneg_ctrl &= ~(1<<13); + autoneg_ctrl &= ~(1<<6); + DP(NETIF_MSG_LINK, + "Setting 10M force\n"); + break; + } + + /* Duplex mode */ + if (params->req_duplex == DUPLEX_FULL) { + autoneg_ctrl |= (1<<8); + DP(NETIF_MSG_LINK, + "Setting full duplex\n"); + } else + autoneg_ctrl &= ~(1<<8); + + /* Update autoneg ctrl and pma ctrl */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, + autoneg_ctrl); + } bnx2x_save_bcm_spirom_ver(bp, params->port, ext_phy_type, @@ -4104,7 +4404,8 @@ static void bnx2x_8727_handle_mod_abs(struct link_params *params) static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, - struct link_vars *vars) + struct link_vars *vars, + u8 is_mi_int) { struct bnx2x *bp = params->bp; u32 ext_phy_type; @@ -4647,48 +4948,77 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, } break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: - /* Clear LASI interrupt */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "8481 LASI status reg = 0x%x\n", - val1); - /* Check 10G-BaseT link status */ - /* Check Global PMD signal ok */ + /* Check PMD signal ok */ bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, - &rx_sd); - /* Check PCS block lock */ + ext_phy_addr, + MDIO_AN_DEVAD, + 0xFFFA, + &val1); bnx2x_cl45_read(bp, params->port, ext_phy_type, ext_phy_addr, - MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, - &pcs_status); - DP(NETIF_MSG_LINK, "8481 1.a = 0x%x, 1.20 = 0x%x\n", - rx_sd, pcs_status); - if (rx_sd & pcs_status & 0x1) { + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_PMD_SIGNAL, + &val2); + DP(NETIF_MSG_LINK, "PMD_SIGNAL 1.a811 = 0x%x\n", val2); + + /* Check link 10G */ + if (val2 & (1<<11)) { vars->line_speed = SPEED_10000; ext_phy_link_up = 1; - } else { - - /* Check 1000-BaseT link status */ - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, 0xFFE1, - &val1); + bnx2x_8481_set_10G_led_mode(params, + ext_phy_type, + ext_phy_addr); + } else { /* Check Legacy speed link */ + u16 legacy_status, legacy_speed; + + /* Enable expansion register 0x42 + (Operation mode status) */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_ACCESS, + 0xf42); - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, 0xFFE1, - &val2); - DP(NETIF_MSG_LINK, "8481 7.FFE1 =" - "0x%x-->0x%x\n", val1, val2); - if (val2 & (1<<2)) { - vars->line_speed = SPEED_1000; - ext_phy_link_up = 1; + /* Get legacy speed operation status */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, + &legacy_status); + + DP(NETIF_MSG_LINK, "Legacy speed status" + " = 0x%x\n", legacy_status); + ext_phy_link_up = ((legacy_status & (1<<11)) + == (1<<11)); + if (ext_phy_link_up) { + legacy_speed = (legacy_status & (3<<9)); + if (legacy_speed == (0<<9)) + vars->line_speed = SPEED_10; + else if (legacy_speed == (1<<9)) + vars->line_speed = + SPEED_100; + else if (legacy_speed == (2<<9)) + vars->line_speed = + SPEED_1000; + else /* Should not happen */ + vars->line_speed = 0; + + if (legacy_status & (1<<8)) + vars->duplex = DUPLEX_FULL; + else + vars->duplex = DUPLEX_HALF; + + DP(NETIF_MSG_LINK, "Link is up " + "in %dMbps, is_duplex_full" + "= %d\n", + vars->line_speed, + (vars->duplex == DUPLEX_FULL)); + bnx2x_8481_set_legacy_led_mode(params, + ext_phy_type, + ext_phy_addr); } } @@ -4775,12 +5105,47 @@ static void bnx2x_link_int_enable(struct link_params *params) REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); } - +static void bnx2x_8481_rearm_latch_signal(struct bnx2x *bp, u8 port, + u8 is_mi_int) +{ + u32 latch_status = 0, is_mi_int_status; + /* Disable the MI INT ( external phy int ) + * by writing 1 to the status register. Link down indication + * is high-active-signal, so in this case we need to write the + * status to clear the XOR + */ + /* Read Latched signals */ + latch_status = REG_RD(bp, + NIG_REG_LATCH_STATUS_0 + port*8); + is_mi_int_status = REG_RD(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + port*4); + DP(NETIF_MSG_LINK, "original_signal = 0x%x, nig_status = 0x%x," + "latch_status = 0x%x\n", + is_mi_int, is_mi_int_status, latch_status); + /* Handle only those with latched-signal=up.*/ + if (latch_status & 1) { + /* For all latched-signal=up,Write original_signal to status */ + if (is_mi_int) + bnx2x_bits_en(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + + port*4, + NIG_STATUS_EMAC0_MI_INT); + else + bnx2x_bits_dis(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + + port*4, + NIG_STATUS_EMAC0_MI_INT); + /* For all latched-signal=up : Re-Arm Latch signals */ + REG_WR(bp, NIG_REG_LATCH_STATUS_0 + port*8, + (latch_status & 0xfffe) | (latch_status & 1)); + } +} /* * link management */ static void bnx2x_link_int_ack(struct link_params *params, - struct link_vars *vars, u8 is_10g) + struct link_vars *vars, u8 is_10g, + u8 is_mi_int) { struct bnx2x *bp = params->bp; u8 port = params->port; @@ -4791,6 +5156,10 @@ static void bnx2x_link_int_ack(struct link_params *params, (NIG_STATUS_XGXS0_LINK10G | NIG_STATUS_XGXS0_LINK_STATUS | NIG_STATUS_SERDES0_LINK_STATUS)); + if (XGXS_EXT_PHY_TYPE(params->ext_phy_config) + == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) { + bnx2x_8481_rearm_latch_signal(bp, port, is_mi_int); + } if (vars->phy_link_up) { if (is_10g) { /* Disable the 10G link interrupt @@ -4810,7 +5179,8 @@ static void bnx2x_link_int_ack(struct link_params *params, PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - DP(NETIF_MSG_LINK, "1G XGXS phy link up\n"); + DP(NETIF_MSG_LINK, "%d speed XGXS phy link up\n", + vars->line_speed); bnx2x_bits_en(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, ((1 << ser_lane) << @@ -5270,7 +5640,7 @@ u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars) &gp_status); /* link is up only if both local phy and external phy are up */ if ((gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) && - bnx2x_ext_phy_is_link_up(params, vars)) + bnx2x_ext_phy_is_link_up(params, vars, 1)) return 0; return -ESRCH; @@ -5758,16 +6128,19 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) u8 link_10g; u8 ext_phy_link_up, rc = 0; u32 ext_phy_type; + u8 is_mi_int = 0; DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n", - port, - (vars->phy_flags & PHY_XGXS_FLAG), - REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); + port, (vars->phy_flags & PHY_XGXS_FLAG), + REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); + is_mi_int = (u8)(REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + + port*0x18) > 0); DP(NETIF_MSG_LINK, "int_mask 0x%x MI_INT %x, SERDES_LINK %x\n", - REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), - REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), - REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c)); + REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), + is_mi_int, + REG_RD(bp, + NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c)); DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n", REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), @@ -5779,7 +6152,7 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); /* Check external link change only for non-direct */ - ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars); + ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars, is_mi_int); /* Read gp_status */ CL45_RD_OVER_CL22(bp, port, params->phy_addr, @@ -5787,7 +6160,8 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) MDIO_GP_STATUS_TOP_AN_STATUS1, &gp_status); - rc = bnx2x_link_settings_status(params, vars, gp_status); + rc = bnx2x_link_settings_status(params, vars, gp_status, + ext_phy_link_up); if (rc != 0) return rc; @@ -5799,7 +6173,7 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) (vars->line_speed == SPEED_15000) || (vars->line_speed == SPEED_16000)); - bnx2x_link_int_ack(params, vars, link_10g); + bnx2x_link_int_ack(params, vars, link_10g, is_mi_int); /* In case external phy link is up, and internal link is down ( not initialized yet probably after link initialization, it needs |