aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/can/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/can/Kconfig')
-rw-r--r--drivers/net/can/Kconfig62
1 files changed, 62 insertions, 0 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 57def0d5737..d5e18812bf4 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -12,6 +12,68 @@ config CAN_VCAN
This driver can also be built as a module. If so, the module
will be called vcan.
+config CAN_DEV
+ tristate "Platform CAN drivers with Netlink support"
+ depends on CAN
+ default Y
+ ---help---
+ Enables the common framework for platform CAN drivers with Netlink
+ support. This is the standard library for CAN drivers.
+ If unsure, say Y.
+
+config CAN_CALC_BITTIMING
+ bool "CAN bit-timing calculation"
+ depends on CAN_DEV
+ default Y
+ ---help---
+ If enabled, CAN bit-timing parameters will be calculated for the
+ bit-rate specified via Netlink argument "bitrate" when the device
+ get started. This works fine for the most common CAN controllers
+ with standard bit-rates but may fail for exotic bit-rates or CAN
+ source clock frequencies. Disabling saves some space, but then the
+ bit-timing parameters must be specified directly using the Netlink
+ arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
+ If unsure, say Y.
+
+config CAN_SJA1000
+ depends on CAN_DEV
+ tristate "Philips SJA1000"
+ ---help---
+ Driver for the SJA1000 CAN controllers from Philips or NXP
+
+config CAN_SJA1000_PLATFORM
+ depends on CAN_SJA1000
+ tristate "Generic Platform Bus based SJA1000 driver"
+ ---help---
+ This driver adds support for the SJA1000 chips connected to
+ the "platform bus" (Linux abstraction for directly to the
+ processor attached devices). Which can be found on various
+ boards from Phytec (http://www.phytec.de) like the PCM027,
+ PCM038.
+
+config CAN_SJA1000_OF_PLATFORM
+ depends on CAN_SJA1000 && PPC_OF
+ tristate "Generic OF Platform Bus based SJA1000 driver"
+ ---help---
+ This driver adds support for the SJA1000 chips connected to
+ the OpenFirmware "platform bus" found on embedded systems with
+ OpenFirmware bindings, e.g. if you have a PowerPC based system
+ you may want to enable this option.
+
+config CAN_EMS_PCI
+ tristate "EMS CPC-PCI and CPC-PCIe Card"
+ depends on PCI && CAN_SJA1000
+ ---help---
+ This driver is for the one or two channel CPC-PCI and CPC-PCIe
+ cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
+config CAN_KVASER_PCI
+ tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+ depends on PCI && CAN_SJA1000
+ ---help---
+ This driver is for the the PCIcanx and PCIcan cards (1, 2 or
+ 4 channel) from Kvaser (http://www.kvaser.com).
+
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
depends on CAN