aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/can
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/can')
-rw-r--r--drivers/net/can/Kconfig13
-rw-r--r--drivers/net/can/Makefile2
-rw-r--r--drivers/net/can/at91_can.c34
-rw-r--r--drivers/net/can/dev.c76
-rw-r--r--drivers/net/can/mcp251x.c1164
-rw-r--r--drivers/net/can/sja1000/sja1000.c17
-rw-r--r--drivers/net/can/sja1000/sja1000.h2
-rw-r--r--drivers/net/can/ti_hecc.c993
-rw-r--r--drivers/net/can/usb/ems_usb.c20
9 files changed, 2245 insertions, 76 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index df32c109b7a..b819cc2a429 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -95,6 +95,19 @@ config CAN_AT91
---help---
This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
+config CAN_TI_HECC
+ depends on CAN_DEV && ARCH_OMAP3
+ tristate "TI High End CAN Controller"
+ ---help---
+ Driver for TI HECC (High End CAN Controller) module found on many
+ TI devices. The device specifications are available from www.ti.com
+
+config CAN_MCP251X
+ tristate "Microchip MCP251x SPI CAN controllers"
+ depends on CAN_DEV && SPI
+ ---help---
+ Driver for the Microchip MCP251x SPI CAN controllers.
+
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
depends on CAN
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index 0dea62721f2..14891817ea5 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -11,5 +11,7 @@ obj-y += usb/
obj-$(CONFIG_CAN_SJA1000) += sja1000/
obj-$(CONFIG_CAN_AT91) += at91_can.o
+obj-$(CONFIG_CAN_TI_HECC) += ti_hecc.o
+obj-$(CONFIG_CAN_MCP251X) += mcp251x.o
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index f67ae285a35..cbe3fce53e3 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -221,38 +221,6 @@ static inline void set_mb_mode(const struct at91_priv *priv, unsigned int mb,
set_mb_mode_prio(priv, mb, mode, 0);
}
-static struct sk_buff *alloc_can_skb(struct net_device *dev,
- struct can_frame **cf)
-{
- struct sk_buff *skb;
-
- skb = netdev_alloc_skb(dev, sizeof(struct can_frame));
- if (unlikely(!skb))
- return NULL;
-
- skb->protocol = htons(ETH_P_CAN);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-
- return skb;
-}
-
-static struct sk_buff *alloc_can_err_skb(struct net_device *dev,
- struct can_frame **cf)
-{
- struct sk_buff *skb;
-
- skb = alloc_can_skb(dev, cf);
- if (unlikely(!skb))
- return NULL;
-
- memset(*cf, 0, sizeof(struct can_frame));
- (*cf)->can_id = CAN_ERR_FLAG;
- (*cf)->can_dlc = CAN_ERR_DLC;
-
- return skb;
-}
-
/*
* Swtich transceiver on or off
*/
@@ -1087,7 +1055,7 @@ static int __init at91_can_probe(struct platform_device *pdev)
goto exit_release;
}
- dev = alloc_candev(sizeof(struct at91_priv));
+ dev = alloc_candev(sizeof(struct at91_priv), AT91_MB_TX_NUM);
if (!dev) {
err = -ENOMEM;
goto exit_iounmap;
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 564e31c9fee..26c89aaeba6 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -245,7 +245,7 @@ static void can_flush_echo_skb(struct net_device *dev)
struct net_device_stats *stats = &dev->stats;
int i;
- for (i = 0; i < CAN_ECHO_SKB_MAX; i++) {
+ for (i = 0; i < priv->echo_skb_max; i++) {
if (priv->echo_skb[i]) {
kfree_skb(priv->echo_skb[i]);
priv->echo_skb[i] = NULL;
@@ -262,10 +262,13 @@ static void can_flush_echo_skb(struct net_device *dev)
* of the device driver. The driver must protect access to
* priv->echo_skb, if necessary.
*/
-void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx)
+void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
+ unsigned int idx)
{
struct can_priv *priv = netdev_priv(dev);
+ BUG_ON(idx >= priv->echo_skb_max);
+
/* check flag whether this packet has to be looped back */
if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK) {
kfree_skb(skb);
@@ -311,10 +314,12 @@ EXPORT_SYMBOL_GPL(can_put_echo_skb);
* is handled in the device driver. The driver must protect
* access to priv->echo_skb, if necessary.
*/
-void can_get_echo_skb(struct net_device *dev, int idx)
+void can_get_echo_skb(struct net_device *dev, unsigned int idx)
{
struct can_priv *priv = netdev_priv(dev);
+ BUG_ON(idx >= priv->echo_skb_max);
+
if (priv->echo_skb[idx]) {
netif_rx(priv->echo_skb[idx]);
priv->echo_skb[idx] = NULL;
@@ -327,10 +332,12 @@ EXPORT_SYMBOL_GPL(can_get_echo_skb);
*
* The function is typically called when TX failed.
*/
-void can_free_echo_skb(struct net_device *dev, int idx)
+void can_free_echo_skb(struct net_device *dev, unsigned int idx)
{
struct can_priv *priv = netdev_priv(dev);
+ BUG_ON(idx >= priv->echo_skb_max);
+
if (priv->echo_skb[idx]) {
kfree_skb(priv->echo_skb[idx]);
priv->echo_skb[idx] = NULL;
@@ -359,17 +366,12 @@ void can_restart(unsigned long data)
can_flush_echo_skb(dev);
/* send restart message upstream */
- skb = dev_alloc_skb(sizeof(struct can_frame));
+ skb = alloc_can_err_skb(dev, &cf);
if (skb == NULL) {
err = -ENOMEM;
goto restart;
}
- skb->dev = dev;
- skb->protocol = htons(ETH_P_CAN);
- cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
- memset(cf, 0, sizeof(struct can_frame));
- cf->can_id = CAN_ERR_FLAG | CAN_ERR_RESTARTED;
- cf->can_dlc = CAN_ERR_DLC;
+ cf->can_id |= CAN_ERR_RESTARTED;
netif_rx(skb);
@@ -442,20 +444,66 @@ static void can_setup(struct net_device *dev)
dev->features = NETIF_F_NO_CSUM;
}
+struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
+{
+ struct sk_buff *skb;
+
+ skb = netdev_alloc_skb(dev, sizeof(struct can_frame));
+ if (unlikely(!skb))
+ return NULL;
+
+ skb->protocol = htons(ETH_P_CAN);
+ skb->pkt_type = PACKET_BROADCAST;
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+ memset(*cf, 0, sizeof(struct can_frame));
+
+ return skb;
+}
+EXPORT_SYMBOL_GPL(alloc_can_skb);
+
+struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf)
+{
+ struct sk_buff *skb;
+
+ skb = alloc_can_skb(dev, cf);
+ if (unlikely(!skb))
+ return NULL;
+
+ (*cf)->can_id = CAN_ERR_FLAG;
+ (*cf)->can_dlc = CAN_ERR_DLC;
+
+ return skb;
+}
+EXPORT_SYMBOL_GPL(alloc_can_err_skb);
+
/*
* Allocate and setup space for the CAN network device
*/
-struct net_device *alloc_candev(int sizeof_priv)
+struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max)
{
struct net_device *dev;
struct can_priv *priv;
+ int size;
- dev = alloc_netdev(sizeof_priv, "can%d", can_setup);
+ if (echo_skb_max)
+ size = ALIGN(sizeof_priv, sizeof(struct sk_buff *)) +
+ echo_skb_max * sizeof(struct sk_buff *);
+ else
+ size = sizeof_priv;
+
+ dev = alloc_netdev(size, "can%d", can_setup);
if (!dev)
return NULL;
priv = netdev_priv(dev);
+ if (echo_skb_max) {
+ priv->echo_skb_max = echo_skb_max;
+ priv->echo_skb = (void *)priv +
+ ALIGN(sizeof_priv, sizeof(struct sk_buff *));
+ }
+
priv->state = CAN_STATE_STOPPED;
init_timer(&priv->restart_timer);
@@ -642,7 +690,7 @@ nla_put_failure:
return -EMSGSIZE;
}
-static int can_newlink(struct net_device *dev,
+static int can_newlink(struct net *src_net, struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[])
{
return -EOPNOTSUPP;
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
new file mode 100644
index 00000000000..8f48f4b50b7
--- /dev/null
+++ b/drivers/net/can/mcp251x.c
@@ -0,0 +1,1164 @@
+/*
+ * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ *
+ * MCP2510 support and bug fixes by Christian Pellegrin
+ * <chripell@evolware.org>
+ *
+ * Copyright 2009 Christian Pellegrin EVOL S.r.l.
+ *
+ * Copyright 2007 Raymarine UK, Ltd. All Rights Reserved.
+ * Written under contract by:
+ * Chris Elston, Katalix Systems, Ltd.
+ *
+ * Based on Microchip MCP251x CAN controller driver written by
+ * David Vrabel, Copyright 2006 Arcom Control Systems Ltd.
+ *
+ * Based on CAN bus driver for the CCAN controller written by
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix
+ * - Simon Kallweit, intefo AG
+ * Copyright 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ *
+ * Your platform definition file should specify something like:
+ *
+ * static struct mcp251x_platform_data mcp251x_info = {
+ * .oscillator_frequency = 8000000,
+ * .board_specific_setup = &mcp251x_setup,
+ * .model = CAN_MCP251X_MCP2510,
+ * .power_enable = mcp251x_power_enable,
+ * .transceiver_enable = NULL,
+ * };
+ *
+ * static struct spi_board_info spi_board_info[] = {
+ * {
+ * .modalias = "mcp251x",
+ * .platform_data = &mcp251x_info,
+ * .irq = IRQ_EINT13,
+ * .max_speed_hz = 2*1000*1000,
+ * .chip_select = 2,
+ * },
+ * };
+ *
+ * Please see mcp251x.h for a description of the fields in
+ * struct mcp251x_platform_data.
+ *
+ */
+
+#include <linux/can.h>
+#include <linux/can/core.h>
+#include <linux/can/dev.h>
+#include <linux/can/platform/mcp251x.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/freezer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/uaccess.h>
+
+/* SPI interface instruction set */
+#define INSTRUCTION_WRITE 0x02
+#define INSTRUCTION_READ 0x03
+#define INSTRUCTION_BIT_MODIFY 0x05
+#define INSTRUCTION_LOAD_TXB(n) (0x40 + 2 * (n))
+#define INSTRUCTION_READ_RXB(n) (((n) == 0) ? 0x90 : 0x94)
+#define INSTRUCTION_RESET 0xC0
+
+/* MPC251x registers */
+#define CANSTAT 0x0e
+#define CANCTRL 0x0f
+# define CANCTRL_REQOP_MASK 0xe0
+# define CANCTRL_REQOP_CONF 0x80
+# define CANCTRL_REQOP_LISTEN_ONLY 0x60
+# define CANCTRL_REQOP_LOOPBACK 0x40
+# define CANCTRL_REQOP_SLEEP 0x20
+# define CANCTRL_REQOP_NORMAL 0x00
+# define CANCTRL_OSM 0x08
+# define CANCTRL_ABAT 0x10
+#define TEC 0x1c
+#define REC 0x1d
+#define CNF1 0x2a
+# define CNF1_SJW_SHIFT 6
+#define CNF2 0x29
+# define CNF2_BTLMODE 0x80
+# define CNF2_SAM 0x40
+# define CNF2_PS1_SHIFT 3
+#define CNF3 0x28
+# define CNF3_SOF 0x08
+# define CNF3_WAKFIL 0x04
+# define CNF3_PHSEG2_MASK 0x07
+#define CANINTE 0x2b
+# define CANINTE_MERRE 0x80
+# define CANINTE_WAKIE 0x40
+# define CANINTE_ERRIE 0x20
+# define CANINTE_TX2IE 0x10
+# define CANINTE_TX1IE 0x08
+# define CANINTE_TX0IE 0x04
+# define CANINTE_RX1IE 0x02
+# define CANINTE_RX0IE 0x01
+#define CANINTF 0x2c
+# define CANINTF_MERRF 0x80
+# define CANINTF_WAKIF 0x40
+# define CANINTF_ERRIF 0x20
+# define CANINTF_TX2IF 0x10
+# define CANINTF_TX1IF 0x08
+# define CANINTF_TX0IF 0x04
+# define CANINTF_RX1IF 0x02
+# define CANINTF_RX0IF 0x01
+#define EFLG 0x2d
+# define EFLG_EWARN 0x01
+# define EFLG_RXWAR 0x02
+# define EFLG_TXWAR 0x04
+# define EFLG_RXEP 0x08
+# define EFLG_TXEP 0x10
+# define EFLG_TXBO 0x20
+# define EFLG_RX0OVR 0x40
+# define EFLG_RX1OVR 0x80
+#define TXBCTRL(n) (((n) * 0x10) + 0x30 + TXBCTRL_OFF)
+# define TXBCTRL_ABTF 0x40
+# define TXBCTRL_MLOA 0x20
+# define TXBCTRL_TXERR 0x10
+# define TXBCTRL_TXREQ 0x08
+#define TXBSIDH(n) (((n) * 0x10) + 0x30 + TXBSIDH_OFF)
+# define SIDH_SHIFT 3
+#define TXBSIDL(n) (((n) * 0x10) + 0x30 + TXBSIDL_OFF)
+# define SIDL_SID_MASK 7
+# define SIDL_SID_SHIFT 5
+# define SIDL_EXIDE_SHIFT 3
+# define SIDL_EID_SHIFT 16
+# define SIDL_EID_MASK 3
+#define TXBEID8(n) (((n) * 0x10) + 0x30 + TXBEID8_OFF)
+#define TXBEID0(n) (((n) * 0x10) + 0x30 + TXBEID0_OFF)
+#define TXBDLC(n) (((n) * 0x10) + 0x30 + TXBDLC_OFF)
+# define DLC_RTR_SHIFT 6
+#define TXBCTRL_OFF 0
+#define TXBSIDH_OFF 1
+#define TXBSIDL_OFF 2
+#define TXBEID8_OFF 3
+#define TXBEID0_OFF 4
+#define TXBDLC_OFF 5
+#define TXBDAT_OFF 6
+#define RXBCTRL(n) (((n) * 0x10) + 0x60 + RXBCTRL_OFF)
+# define RXBCTRL_BUKT 0x04
+# define RXBCTRL_RXM0 0x20
+# define RXBCTRL_RXM1 0x40
+#define RXBSIDH(n) (((n) * 0x10) + 0x60 + RXBSIDH_OFF)
+# define RXBSIDH_SHIFT 3
+#define RXBSIDL(n) (((n) * 0x10) + 0x60 + RXBSIDL_OFF)
+# define RXBSIDL_IDE 0x08
+# define RXBSIDL_EID 3
+# define RXBSIDL_SHIFT 5
+#define RXBEID8(n) (((n) * 0x10) + 0x60 + RXBEID8_OFF)
+#define RXBEID0(n) (((n) * 0x10) + 0x60 + RXBEID0_OFF)
+#define RXBDLC(n) (((n) * 0x10) + 0x60 + RXBDLC_OFF)
+# define RXBDLC_LEN_MASK 0x0f
+# define RXBDLC_RTR 0x40
+#define RXBCTRL_OFF 0
+#define RXBSIDH_OFF 1
+#define RXBSIDL_OFF 2
+#define RXBEID8_OFF 3
+#define RXBEID0_OFF 4
+#define RXBDLC_OFF 5
+#define RXBDAT_OFF 6
+
+#define GET_BYTE(val, byte) \
+ (((val) >> ((byte) * 8)) & 0xff)
+#define SET_BYTE(val, byte) \
+ (((val) & 0xff) << ((byte) * 8))
+
+/*
+ * Buffer size required for the largest SPI transfer (i.e., reading a
+ * frame)
+ */
+#define CAN_FRAME_MAX_DATA_LEN 8
+#define SPI_TRANSFER_BUF_LEN (6 + CAN_FRAME_MAX_DATA_LEN)
+#define CAN_FRAME_MAX_BITS 128
+
+#define TX_ECHO_SKB_MAX 1
+
+#define DEVICE_NAME "mcp251x"
+
+static int mcp251x_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */
+module_param(mcp251x_enable_dma, int, S_IRUGO);
+MODULE_PARM_DESC(mcp251x_enable_dma, "Enable SPI DMA. Default: 0 (Off)");
+
+static struct can_bittiming_const mcp251x_bittiming_const = {
+ .name = DEVICE_NAME,
+ .tseg1_min = 3,
+ .tseg1_max = 16,
+ .tseg2_min = 2,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 64,
+ .brp_inc = 1,
+};
+
+struct mcp251x_priv {
+ struct can_priv can;
+ struct net_device *net;
+ struct spi_device *spi;
+
+ struct mutex spi_lock; /* SPI buffer lock */
+ u8 *spi_tx_buf;
+ u8 *spi_rx_buf;
+ dma_addr_t spi_tx_dma;
+ dma_addr_t spi_rx_dma;
+
+ struct sk_buff *tx_skb;
+ int tx_len;
+ struct workqueue_struct *wq;
+ struct work_struct tx_work;
+ struct work_struct irq_work;
+ struct completion awake;
+ int wake;
+ int force_quit;
+ int after_suspend;
+#define AFTER_SUSPEND_UP 1
+#define AFTER_SUSPEND_DOWN 2
+#define AFTER_SUSPEND_POWER 4
+#define AFTER_SUSPEND_RESTART 8
+ int restart_tx;
+};
+
+static void mcp251x_clean(struct net_device *net)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+
+ net->stats.tx_errors++;
+ if (priv->tx_skb)
+ dev_kfree_skb(priv->tx_skb);
+ if (priv->tx_len)
+ can_free_echo_skb(priv->net, 0);
+ priv->tx_skb = NULL;
+ priv->tx_len = 0;
+}
+
+/*
+ * Note about handling of error return of mcp251x_spi_trans: accessing
+ * registers via SPI is not really different conceptually than using
+ * normal I/O assembler instructions, although it's much more
+ * complicated from a practical POV. So it's not advisable to always
+ * check the return value of this function. Imagine that every
+ * read{b,l}, write{b,l} and friends would be bracketed in "if ( < 0)
+ * error();", it would be a great mess (well there are some situation
+ * when exception handling C++ like could be useful after all). So we
+ * just check that transfers are OK at the beginning of our
+ * conversation with the chip and to avoid doing really nasty things
+ * (like injecting bogus packets in the network stack).
+ */
+static int mcp251x_spi_trans(struct spi_device *spi, int len)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ struct spi_transfer t = {
+ .tx_buf = priv->spi_tx_buf,
+ .rx_buf = priv->spi_rx_buf,
+ .len = len,
+ .cs_change = 0,
+ };
+ struct spi_message m;
+ int ret;
+
+ spi_message_init(&m);
+
+ if (mcp251x_enable_dma) {
+ t.tx_dma = priv->spi_tx_dma;
+ t.rx_dma = priv->spi_rx_dma;
+ m.is_dma_mapped = 1;
+ }
+
+ spi_message_add_tail(&t, &m);
+
+ ret = spi_sync(spi, &m);
+ if (ret)
+ dev_err(&spi->dev, "spi transfer failed: ret = %d\n", ret);
+ return ret;
+}
+
+static u8 mcp251x_read_reg(struct spi_device *spi, uint8_t reg)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ u8 val = 0;
+
+ mutex_lock(&priv->spi_lock);
+
+ priv->spi_tx_buf[0] = INSTRUCTION_READ;
+ priv->spi_tx_buf[1] = reg;
+
+ mcp251x_spi_trans(spi, 3);
+ val = priv->spi_rx_buf[2];
+
+ mutex_unlock(&priv->spi_lock);
+
+ return val;
+}
+
+static void mcp251x_write_reg(struct spi_device *spi, u8 reg, uint8_t val)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+ mutex_lock(&priv->spi_lock);
+
+ priv->spi_tx_buf[0] = INSTRUCTION_WRITE;
+ priv->spi_tx_buf[1] = reg;
+ priv->spi_tx_buf[2] = val;
+
+ mcp251x_spi_trans(spi, 3);
+
+ mutex_unlock(&priv->spi_lock);
+}
+
+static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
+ u8 mask, uint8_t val)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+ mutex_lock(&priv->spi_lock);
+
+ priv->spi_tx_buf[0] = INSTRUCTION_BIT_MODIFY;
+ priv->spi_tx_buf[1] = reg;
+ priv->spi_tx_buf[2] = mask;
+ priv->spi_tx_buf[3] = val;
+
+ mcp251x_spi_trans(spi, 4);
+
+ mutex_unlock(&priv->spi_lock);
+}
+
+static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
+ int len, int tx_buf_idx)
+{
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+ if (pdata->model == CAN_MCP251X_MCP2510) {
+ int i;
+
+ for (i = 1; i < TXBDAT_OFF + len; i++)
+ mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx) + i,
+ buf[i]);
+ } else {
+ mutex_lock(&priv->spi_lock);
+ memcpy(priv->spi_tx_buf, buf, TXBDAT_OFF + len);
+ mcp251x_spi_trans(spi, TXBDAT_OFF + len);
+ mutex_unlock(&priv->spi_lock);
+ }
+}
+
+static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
+ int tx_buf_idx)
+{
+ u32 sid, eid, exide, rtr;
+ u8 buf[SPI_TRANSFER_BUF_LEN];
+
+ exide = (frame->can_id & CAN_EFF_FLAG) ? 1 : 0; /* Extended ID Enable */
+ if (exide)
+ sid = (frame->can_id & CAN_EFF_MASK) >> 18;
+ else
+ sid = frame->can_id & CAN_SFF_MASK; /* Standard ID */
+ eid = frame->can_id & CAN_EFF_MASK; /* Extended ID */
+ rtr = (frame->can_id & CAN_RTR_FLAG) ? 1 : 0; /* Remote transmission */
+
+ buf[TXBCTRL_OFF] = INSTRUCTION_LOAD_TXB(tx_buf_idx);
+ buf[TXBSIDH_OFF] = sid >> SIDH_SHIFT;
+ buf[TXBSIDL_OFF] = ((sid & SIDL_SID_MASK) << SIDL_SID_SHIFT) |
+ (exide << SIDL_EXIDE_SHIFT) |
+ ((eid >> SIDL_EID_SHIFT) & SIDL_EID_MASK);
+ buf[TXBEID8_OFF] = GET_BYTE(eid, 1);
+ buf[TXBEID0_OFF] = GET_BYTE(eid, 0);
+ buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc;
+ memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc);
+ mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx);
+ mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx), TXBCTRL_TXREQ);
+}
+
+static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
+ int buf_idx)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+
+ if (pdata->model == CAN_MCP251X_MCP2510) {
+ int i, len;
+
+ for (i = 1; i < RXBDAT_OFF; i++)
+ buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i);
+ len = buf[RXBDLC_OFF] & RXBDLC_LEN_MASK;
+ if (len > 8)
+ len = 8;
+ for (; i < (RXBDAT_OFF + len); i++)
+ buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i);
+ } else {
+ mutex_lock(&priv->spi_lock);
+
+ priv->spi_tx_buf[RXBCTRL_OFF] = INSTRUCTION_READ_RXB(buf_idx);
+ mcp251x_spi_trans(spi, SPI_TRANSFER_BUF_LEN);
+ memcpy(buf, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN);
+
+ mutex_unlock(&priv->spi_lock);
+ }
+}
+
+static void mcp251x_hw_rx(struct spi_device *spi, int buf_idx)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ struct sk_buff *skb;
+ struct can_frame *frame;
+ u8 buf[SPI_TRANSFER_BUF_LEN];
+
+ skb = alloc_can_skb(priv->net, &frame);
+ if (!skb) {
+ dev_err(&spi->dev, "cannot allocate RX skb\n");
+ priv->net->stats.rx_dropped++;
+ return;
+ }
+
+ mcp251x_hw_rx_frame(spi, buf, buf_idx);
+ if (buf[RXBSIDL_OFF] & RXBSIDL_IDE) {
+ /* Extended ID format */
+ frame->can_id = CAN_EFF_FLAG;
+ frame->can_id |=
+ /* Extended ID part */
+ SET_BYTE(buf[RXBSIDL_OFF] & RXBSIDL_EID, 2) |
+ SET_BYTE(buf[RXBEID8_OFF], 1) |
+ SET_BYTE(buf[RXBEID0_OFF], 0) |
+ /* Standard ID part */
+ (((buf[RXBSIDH_OFF] << RXBSIDH_SHIFT) |
+ (buf[RXBSIDL_OFF] >> RXBSIDL_SHIFT)) << 18);
+ /* Remote transmission request */
+ if (buf[RXBDLC_OFF] & RXBDLC_RTR)
+ frame->can_id |= CAN_RTR_FLAG;
+ } else {
+ /* Standard ID format */
+ frame->can_id =
+ (buf[RXBSIDH_OFF] << RXBSIDH_SHIFT) |
+ (buf[RXBSIDL_OFF] >> RXBSIDL_SHIFT);
+ }
+ /* Data length */
+ frame->can_dlc = buf[RXBDLC_OFF] & RXBDLC_LEN_MASK;
+ if (frame->can_dlc > 8) {
+ dev_warn(&spi->dev, "invalid frame recevied\n");
+ priv->net->stats.rx_errors++;
+ dev_kfree_skb(skb);
+ return;
+ }
+ memcpy(frame->data, buf + RXBDAT_OFF, frame->can_dlc);
+
+ priv->net->stats.rx_packets++;
+ priv->net->stats.rx_bytes += frame->can_dlc;
+ netif_rx(skb);
+}
+
+static void mcp251x_hw_sleep(struct spi_device *spi)
+{
+ mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_SLEEP);
+}
+
+static void mcp251x_hw_wakeup(struct spi_device *spi)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+ priv->wake = 1;
+
+ /* Can only wake up by generating a wake-up interrupt. */
+ mcp251x_write_bits(spi, CANINTE, CANINTE_WAKIE, CANINTE_WAKIE);
+ mcp251x_write_bits(spi, CANINTF, CANINTF_WAKIF, CANINTF_WAKIF);
+
+ /* Wait until the device is awake */
+ if (!wait_for_completion_timeout(&priv->awake, HZ))
+ dev_err(&spi->dev, "MCP251x didn't wake-up\n");
+}
+
+static netdev_tx_t mcp251x_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *net)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+ struct spi_device *spi = priv->spi;
+
+ if (priv->tx_skb || priv->tx_len) {
+ dev_warn(&spi->dev, "hard_xmit called while tx busy\n");
+ netif_stop_queue(net);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (skb->len != sizeof(struct can_frame)) {
+ dev_err(&spi->dev, "dropping packet - bad length\n");
+ dev_kfree_skb(skb);
+ net->stats.tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ netif_stop_queue(net);
+ priv->tx_skb = skb;
+ net->trans_start = jiffies;
+ queue_work(priv->wq, &priv->tx_work);
+
+ return NETDEV_TX_OK;
+}
+
+static int mcp251x_do_set_mode(struct net_device *net, enum can_mode mode)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+
+ switch (mode) {
+ case CAN_MODE_START:
+ /* We have to delay work since SPI I/O may sleep */
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+ priv->restart_tx = 1;
+ if (priv->can.restart_ms == 0)
+ priv->after_suspend = AFTER_SUSPEND_RESTART;
+ queue_work(priv->wq, &priv->irq_work);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static void mcp251x_set_normal_mode(struct spi_device *spi)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ unsigned long timeout;
+
+ /* Enable interrupts */
+ mcp251x_write_reg(spi, CANINTE,
+ CANINTE_ERRIE | CANINTE_TX2IE | CANINTE_TX1IE |
+ CANINTE_TX0IE | CANINTE_RX1IE | CANINTE_RX0IE |
+ CANINTF_MERRF);
+
+ if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
+ /* Put device into loopback mode */
+ mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LOOPBACK);
+ } else {
+ /* Put device into normal mode */
+ mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL);
+
+ /* Wait for the device to enter normal mode */
+ timeout = jiffies + HZ;
+ while (mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) {
+ schedule();
+ if (time_after(jiffies, timeout)) {
+ dev_err(&spi->dev, "MCP251x didn't"
+ " enter in normal mode\n");
+ return;
+ }
+ }
+ }
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+}
+
+static int mcp251x_do_set_bittiming(struct net_device *net)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+ struct can_bittiming *bt = &priv->can.bittiming;
+ struct spi_device *spi = priv->spi;
+
+ mcp251x_write_reg(spi, CNF1, ((bt->sjw - 1) << CNF1_SJW_SHIFT) |
+ (bt->brp - 1));
+ mcp251x_write_reg(spi, CNF2, CNF2_BTLMODE |
+ (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES ?
+ CNF2_SAM : 0) |
+ ((bt->phase_seg1 - 1) << CNF2_PS1_SHIFT) |
+ (bt->prop_seg - 1));
+ mcp251x_write_bits(spi, CNF3, CNF3_PHSEG2_MASK,
+ (bt->phase_seg2 - 1));
+ dev_info(&spi->dev, "CNF: 0x%02x 0x%02x 0x%02x\n",
+ mcp251x_read_reg(spi, CNF1),
+ mcp251x_read_reg(spi, CNF2),
+ mcp251x_read_reg(spi, CNF3));
+
+ return 0;
+}
+
+static int mcp251x_setup(struct net_device *net, struct mcp251x_priv *priv,
+ struct spi_device *spi)
+{
+ int ret;
+
+ ret = open_candev(net);
+ if (ret) {
+ dev_err(&spi->dev, "unable to set initial baudrate!\n");
+ return ret;
+ }
+
+ /* Enable RX0->RX1 buffer roll over and disable filters */
+ mcp251x_write_bits(spi, RXBCTRL(0),
+ RXBCTRL_BUKT | RXBCTRL_RXM0 | RXBCTRL_RXM1,
+ RXBCTRL_BUKT | RXBCTRL_RXM0 | RXBCTRL_RXM1);
+ mcp251x_write_bits(spi, RXBCTRL(1),
+ RXBCTRL_RXM0 | RXBCTRL_RXM1,
+ RXBCTRL_RXM0 | RXBCTRL_RXM1);
+ return 0;
+}
+
+static void mcp251x_hw_reset(struct spi_device *spi)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ int ret;
+
+ mutex_lock(&priv->spi_lock);
+
+ priv->spi_tx_buf[0] = INSTRUCTION_RESET;
+
+ ret = spi_write(spi, priv->spi_tx_buf, 1);
+
+ mutex_unlock(&priv->spi_lock);
+
+ if (ret)
+ dev_err(&spi->dev, "reset failed: ret = %d\n", ret);
+ /* Wait for reset to finish */
+ mdelay(10);
+}
+
+static int mcp251x_hw_probe(struct spi_device *spi)
+{
+ int st1, st2;
+
+ mcp251x_hw_reset(spi);
+
+ /*
+ * Please note that these are "magic values" based on after
+ * reset defaults taken from data sheet which allows us to see
+ * if we really have a chip on the bus (we avoid common all
+ * zeroes or all ones situations)
+ */
+ st1 = mcp251x_read_reg(spi, CANSTAT) & 0xEE;
+ st2 = mcp251x_read_reg(spi, CANCTRL) & 0x17;
+
+ dev_dbg(&spi->dev, "CANSTAT 0x%02x CANCTRL 0x%02x\n", st1, st2);
+
+ /* Check for power up default values */
+ return (st1 == 0x80 && st2 == 0x07) ? 1 : 0;
+}
+
+static irqreturn_t mcp251x_can_isr(int irq, void *dev_id)
+{
+ struct net_device *net = (struct net_device *)dev_id;
+ struct mcp251x_priv *priv = netdev_priv(net);
+
+ /* Schedule bottom half */
+ if (!work_pending(&priv->irq_work))
+ queue_work(priv->wq, &priv->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static int mcp251x_open(struct net_device *net)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+ struct spi_device *spi = priv->spi;
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ int ret;
+
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(1);
+
+ priv->force_quit = 0;
+ priv->tx_skb = NULL;
+ priv->tx_len = 0;
+
+ ret = request_irq(spi->irq, mcp251x_can_isr,
+ IRQF_TRIGGER_FALLING, DEVICE_NAME, net);
+ if (ret) {
+ dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq);
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(0);
+ return ret;
+ }
+
+ mcp251x_hw_wakeup(spi);
+ mcp251x_hw_reset(spi);
+ ret = mcp251x_setup(net, priv, spi);
+ if (ret) {
+ free_irq(spi->irq, net);
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(0);
+ return ret;
+ }
+ mcp251x_set_normal_mode(spi);
+ netif_wake_queue(net);
+
+ return 0;
+}
+
+static int mcp251x_stop(struct net_device *net)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+ struct spi_device *spi = priv->spi;
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+
+ close_candev(net);
+
+ /* Disable and clear pending interrupts */
+ mcp251x_write_reg(spi, CANINTE, 0x00);
+ mcp251x_write_reg(spi, CANINTF, 0x00);
+
+ priv->force_quit = 1;
+ free_irq(spi->irq, net);
+ flush_workqueue(priv->wq);
+
+ mcp251x_write_reg(spi, TXBCTRL(0), 0);
+ if (priv->tx_skb || priv->tx_len)
+ mcp251x_clean(net);
+
+ mcp251x_hw_sleep(spi);
+
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(0);
+
+ priv->can.state = CAN_STATE_STOPPED;
+
+ return 0;
+}
+
+static void mcp251x_tx_work_handler(struct work_struct *ws)
+{
+ struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv,
+ tx_work);
+ struct spi_device *spi = priv->spi;
+ struct net_device *net = priv->net;
+ struct can_frame *frame;
+
+ if (priv->tx_skb) {
+ frame = (struct can_frame *)priv->tx_skb->data;
+
+ if (priv->can.state == CAN_STATE_BUS_OFF) {
+ mcp251x_clean(net);
+ netif_wake_queue(net);
+ return;
+ }
+ if (frame->can_dlc > CAN_FRAME_MAX_DATA_LEN)
+ frame->can_dlc = CAN_FRAME_MAX_DATA_LEN;
+ mcp251x_hw_tx(spi, frame, 0);
+ priv->tx_len = 1 + frame->can_dlc;
+ can_put_echo_skb(priv->tx_skb, net, 0);
+ priv->tx_skb = NULL;
+ }
+}
+
+static void mcp251x_irq_work_handler(struct work_struct *ws)
+{
+ struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv,
+ irq_work);
+ struct spi_device *spi = priv->spi;
+ struct net_device *net = priv->net;
+ u8 txbnctrl;
+ u8 intf;
+ enum can_state new_state;
+
+ if (priv->after_suspend) {
+ mdelay(10);
+ mcp251x_hw_reset(spi);
+ mcp251x_setup(net, priv, spi);
+ if (priv->after_suspend & AFTER_SUSPEND_RESTART) {
+ mcp251x_set_normal_mode(spi);
+ } else if (priv->after_suspend & AFTER_SUSPEND_UP) {
+ netif_device_attach(net);
+ /* Clean since we lost tx buffer */
+ if (priv->tx_skb || priv->tx_len) {
+ mcp251x_clean(net);
+ netif_wake_queue(net);
+ }
+ mcp251x_set_normal_mode(spi);
+ } else {
+ mcp251x_hw_sleep(spi);
+ }
+ priv->after_suspend = 0;
+ }
+
+ if (priv->can.restart_ms == 0 && priv->can.state == CAN_STATE_BUS_OFF)
+ return;
+
+ while (!priv->force_quit && !freezing(current)) {
+ u8 eflag = mcp251x_read_reg(spi, EFLG);
+ int can_id = 0, data1 = 0;
+
+ mcp251x_write_reg(spi, EFLG, 0x00);
+
+ if (priv->restart_tx) {
+ priv->restart_tx = 0;
+ mcp251x_write_reg(spi, TXBCTRL(0), 0);
+ if (priv->tx_skb || priv->tx_len)
+ mcp251x_clean(net);
+ netif_wake_queue(net);
+ can_id |= CAN_ERR_RESTARTED;
+ }
+
+ if (priv->wake) {
+ /* Wait whilst the device wakes up */
+ mdelay(10);
+ priv->wake = 0;
+ }
+
+ intf = mcp251x_read_reg(spi, CANINTF);
+ mcp251x_write_bits(spi, CANINTF, intf, 0x00);
+
+ /* Update can state */
+ if (eflag & EFLG_TXBO) {
+ new_state = CAN_STATE_BUS_OFF;
+ can_id |= CAN_ERR_BUSOFF;
+ } else if (eflag & EFLG_TXEP) {
+ new_state = CAN_STATE_ERROR_PASSIVE;
+ can_id |= CAN_ERR_CRTL;
+ data1 |= CAN_ERR_CRTL_TX_PASSIVE;
+ } else if (eflag & EFLG_RXEP) {
+ new_state = CAN_STATE_ERROR_PASSIVE;
+ can_id |= CAN_ERR_CRTL;
+ data1 |= CAN_ERR_CRTL_RX_PASSIVE;
+ } else if (eflag & EFLG_TXWAR) {
+ new_state = CAN_STATE_ERROR_WARNING;
+ can_id |= CAN_ERR_CRTL;
+ data1 |= CAN_ERR_CRTL_TX_WARNING;
+ } else if (eflag & EFLG_RXWAR) {
+ new_state = CAN_STATE_ERROR_WARNING;
+ can_id |= CAN_ERR_CRTL;
+ data1 |= CAN_ERR_CRTL_RX_WARNING;
+ } else {
+ new_state = CAN_STATE_ERROR_ACTIVE;
+ }
+
+ /* Update can state statistics */
+ switch (priv->can.state) {
+ case CAN_STATE_ERROR_ACTIVE:
+ if (new_state >= CAN_STATE_ERROR_WARNING &&
+ new_state <= CAN_STATE_BUS_OFF)
+ priv->can.can_stats.error_warning++;
+ case CAN_STATE_ERROR_WARNING: /* fallthrough */
+ if (new_state >= CAN_STATE_ERROR_PASSIVE &&
+ new_state <= CAN_STATE_BUS_OFF)
+ priv->can.can_stats.error_passive++;
+ break;
+ default:
+ break;
+ }
+ priv->can.state = new_state;
+
+ if ((intf & CANINTF_ERRIF) || (can_id & CAN_ERR_RESTARTED)) {
+ struct sk_buff *skb;
+ struct can_frame *frame;
+
+ /* Create error frame */
+ skb = alloc_can_err_skb(net, &frame);
+ if (skb) {
+ /* Set error frame flags based on bus state */
+ frame->can_id = can_id;
+ frame->data[1] = data1;
+
+ /* Update net stats for overflows */
+ if (eflag & (EFLG_RX0OVR | EFLG_RX1OVR)) {
+ if (eflag & EFLG_RX0OVR)
+ net->stats.rx_over_errors++;
+ if (eflag & EFLG_RX1OVR)
+ net->stats.rx_over_errors++;
+ frame->can_id |= CAN_ERR_CRTL;
+ frame->data[1] |=
+ CAN_ERR_CRTL_RX_OVERFLOW;
+ }
+
+ netif_rx(skb);
+ } else {
+ dev_info(&spi->dev,
+ "cannot allocate error skb\n");
+ }
+ }
+
+ if (priv->can.state == CAN_STATE_BUS_OFF) {
+ if (priv->can.restart_ms == 0) {
+ can_bus_off(net);
+ mcp251x_hw_sleep(spi);
+ return;
+ }
+ }
+
+ if (intf == 0)
+ break;
+
+ if (intf & CANINTF_WAKIF)
+ complete(&priv->awake);
+
+ if (intf & CANINTF_MERRF) {
+ /* If there are pending Tx buffers, restart queue */
+ txbnctrl = mcp251x_read_reg(spi, TXBCTRL(0));
+ if (!(txbnctrl & TXBCTRL_TXREQ)) {
+ if (priv->tx_skb || priv->tx_len)
+ mcp251x_clean(net);
+ netif_wake_queue(net);
+ }
+ }
+
+ if (intf & (CANINTF_TX2IF | CANINTF_TX1IF | CANINTF_TX0IF)) {
+ net->stats.tx_packets++;
+ net->stats.tx_bytes += priv->tx_len - 1;
+ if (priv->tx_len) {
+ can_get_echo_skb(net, 0);
+ priv->tx_len = 0;
+ }
+ netif_wake_queue(net);
+ }
+
+ if (intf & CANINTF_RX0IF)
+ mcp251x_hw_rx(spi, 0);
+
+ if (intf & CANINTF_RX1IF)
+ mcp251x_hw_rx(spi, 1);
+ }
+}
+
+static const struct net_device_ops mcp251x_netdev_ops = {
+ .ndo_open = mcp251x_open,
+ .ndo_stop = mcp251x_stop,
+ .ndo_start_xmit = mcp251x_hard_start_xmit,
+};
+
+static int __devinit mcp251x_can_probe(struct spi_device *spi)
+{
+ struct net_device *net;
+ struct mcp251x_priv *priv;
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ int ret = -ENODEV;
+
+ if (!pdata)
+ /* Platform data is required for osc freq */
+ goto error_out;
+
+ /* Allocate can/net device */
+ net = alloc_candev(sizeof(struct mcp251x_priv), TX_ECHO_SKB_MAX);
+ if (!net) {
+ ret = -ENOMEM;
+ goto error_alloc;
+ }
+
+ net->netdev_ops = &mcp251x_netdev_ops;
+ net->flags |= IFF_ECHO;
+
+ priv = netdev_priv(net);
+ priv->can.bittiming_const = &mcp251x_bittiming_const;
+ priv->can.do_set_mode = mcp251x_do_set_mode;
+ priv->can.clock.freq = pdata->oscillator_frequency / 2;
+ priv->can.do_set_bittiming = mcp251x_do_set_bittiming;
+ priv->net = net;
+ dev_set_drvdata(&spi->dev, priv);
+
+ priv->spi = spi;
+ mutex_init(&priv->spi_lock);
+
+ /* If requested, allocate DMA buffers */
+ if (mcp251x_enable_dma) {
+ spi->dev.coherent_dma_mask = ~0;
+
+ /*
+ * Minimum coherent DMA allocation is PAGE_SIZE, so allocate
+ * that much and share it between Tx and Rx DMA buffers.
+ */
+ priv->spi_tx_buf = dma_alloc_coherent(&spi->dev,
+ PAGE_SIZE,
+ &priv->spi_tx_dma,
+ GFP_DMA);
+
+ if (priv->spi_tx_buf) {
+ priv->spi_rx_buf = (u8 *)(priv->spi_tx_buf +
+ (PAGE_SIZE / 2));
+ priv->spi_rx_dma = (dma_addr_t)(priv->spi_tx_dma +
+ (PAGE_SIZE / 2));
+ } else {
+ /* Fall back to non-DMA */
+ mcp251x_enable_dma = 0;
+ }
+ }
+
+ /* Allocate non-DMA buffers */
+ if (!mcp251x_enable_dma) {
+ priv->spi_tx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_tx_buf) {
+ ret = -ENOMEM;
+ goto error_tx_buf;
+ }
+ priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_tx_buf) {
+ ret = -ENOMEM;
+ goto error_rx_buf;
+ }
+ }
+
+ if (pdata->power_enable)
+ pdata->power_enable(1);
+
+ /* Call out to platform specific setup */
+ if (pdata->board_specific_setup)
+ pdata->board_specific_setup(spi);
+
+ SET_NETDEV_DEV(net, &spi->dev);
+
+ priv->wq = create_freezeable_workqueue("mcp251x_wq");
+
+ INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler);
+ INIT_WORK(&priv->irq_work, mcp251x_irq_work_handler);
+
+ init_completion(&priv->awake);
+
+ /* Configure the SPI bus */
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ spi_setup(spi);
+
+ if (!mcp251x_hw_probe(spi)) {
+ dev_info(&spi->dev, "Probe failed\n");
+ goto error_probe;
+ }
+ mcp251x_hw_sleep(spi);
+
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(0);
+
+ ret = register_candev(net);
+ if (!ret) {
+ dev_info(&spi->dev, "probed\n");
+ return ret;
+ }
+error_probe:
+ if (!mcp251x_enable_dma)
+ kfree(priv->spi_rx_buf);
+error_rx_buf:
+ if (!mcp251x_enable_dma)
+ kfree(priv->spi_tx_buf);
+error_tx_buf:
+ free_candev(net);
+ if (mcp251x_enable_dma)
+ dma_free_coherent(&spi->dev, PAGE_SIZE,
+ priv->spi_tx_buf, priv->spi_tx_dma);
+error_alloc:
+ if (pdata->power_enable)
+ pdata->power_enable(0);
+ dev_err(&spi->dev, "probe failed\n");
+error_out:
+ return ret;
+}
+
+static int __devexit mcp251x_can_remove(struct spi_device *spi)
+{
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ struct net_device *net = priv->net;
+
+ unregister_candev(net);
+ free_candev(net);
+
+ priv->force_quit = 1;
+ flush_workqueue(priv->wq);
+ destroy_workqueue(priv->wq);
+
+ if (mcp251x_enable_dma) {
+ dma_free_coherent(&spi->dev, PAGE_SIZE,
+ priv->spi_tx_buf, priv->spi_tx_dma);
+ } else {
+ kfree(priv->spi_tx_buf);
+ kfree(priv->spi_rx_buf);
+ }
+
+ if (pdata->power_enable)
+ pdata->power_enable(0);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int mcp251x_can_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ struct net_device *net = priv->net;
+
+ if (netif_running(net)) {
+ netif_device_detach(net);
+
+ mcp251x_hw_sleep(spi);
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(0);
+ priv->after_suspend = AFTER_SUSPEND_UP;
+ } else {
+ priv->after_suspend = AFTER_SUSPEND_DOWN;
+ }
+
+ if (pdata->power_enable) {
+ pdata->power_enable(0);
+ priv->after_suspend |= AFTER_SUSPEND_POWER;
+ }
+
+ return 0;
+}
+
+static int mcp251x_can_resume(struct spi_device *spi)
+{
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+ if (priv->after_suspend & AFTER_SUSPEND_POWER) {
+ pdata->power_enable(1);
+ queue_work(priv->wq, &priv->irq_work);
+ } else {
+ if (priv->after_suspend & AFTER_SUSPEND_UP) {
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(1);
+ queue_work(priv->wq, &priv->irq_work);
+ } else {
+ priv->after_suspend = 0;
+ }
+ }
+ return 0;
+}
+#else
+#define mcp251x_can_suspend NULL
+#define mcp251x_can_resume NULL
+#endif
+
+static struct spi_driver mcp251x_can_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+
+ .probe = mcp251x_can_probe,
+ .remove = __devexit_p(mcp251x_can_remove),
+ .suspend = mcp251x_can_suspend,
+ .resume = mcp251x_can_resume,
+};
+
+static int __init mcp251x_can_init(void)
+{
+ return spi_register_driver(&mcp251x_can_driver);
+}
+
+static void __exit mcp251x_can_exit(void)
+{
+ spi_unregister_driver(&mcp251x_can_driver);
+}
+
+module_init(mcp251x_can_init);
+module_exit(mcp251x_can_exit);
+
+MODULE_AUTHOR("Chris Elston <celston@katalix.com>, "
+ "Christian Pellegrin <chripell@evolware.org>");
+MODULE_DESCRIPTION("Microchip 251x CAN driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 16d2ecd2a3b..782a47fabf2 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -296,11 +296,9 @@ static void sja1000_rx(struct net_device *dev)
uint8_t dlc;
int i;
- skb = dev_alloc_skb(sizeof(struct can_frame));
+ skb = alloc_can_skb(dev, &cf);
if (skb == NULL)
return;
- skb->dev = dev;
- skb->protocol = htons(ETH_P_CAN);
fi = priv->read_reg(priv, REG_FI);
dlc = fi & 0x0F;
@@ -323,8 +321,6 @@ static void sja1000_rx(struct net_device *dev)
if (fi & FI_RTR)
id |= CAN_RTR_FLAG;
- cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
- memset(cf, 0, sizeof(struct can_frame));
cf->can_id = id;
cf->can_dlc = dlc;
for (i = 0; i < dlc; i++)
@@ -351,15 +347,9 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
enum can_state state = priv->can.state;
uint8_t ecc, alc;
- skb = dev_alloc_skb(sizeof(struct can_frame));
+ skb = alloc_can_err_skb(dev, &cf);
if (skb == NULL)
return -ENOMEM;
- skb->dev = dev;
- skb->protocol = htons(ETH_P_CAN);
- cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
- memset(cf, 0, sizeof(struct can_frame));
- cf->can_id = CAN_ERR_FLAG;
- cf->can_dlc = CAN_ERR_DLC;
if (isrc & IRQ_DOI) {
/* data overrun interrupt */
@@ -565,7 +555,8 @@ struct net_device *alloc_sja1000dev(int sizeof_priv)
struct net_device *dev;
struct sja1000_priv *priv;
- dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv);
+ dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv,
+ SJA1000_ECHO_SKB_MAX);
if (!dev)
return NULL;
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index 302d2c763ad..97a622b9302 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -50,6 +50,8 @@
#include <linux/can/dev.h>
#include <linux/can/platform/sja1000.h>
+#define SJA1000_ECHO_SKB_MAX 1 /* the SJA1000 has one TX buffer object */
+
#define SJA1000_MAX_IRQ 20 /* max. number of interrupts handled in ISR */
/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
new file mode 100644
index 00000000000..07e8016b17e
--- /dev/null
+++ b/drivers/net/can/ti_hecc.c
@@ -0,0 +1,993 @@
+/*
+ * TI HECC (CAN) device driver
+ *
+ * This driver supports TI's HECC (High End CAN Controller module) and the
+ * specs for the same is available at <http://www.ti.com>
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed as is WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/*
+ * Your platform definitions should specify module ram offsets and interrupt
+ * number to use as follows:
+ *
+ * static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
+ * .scc_hecc_offset = 0,
+ * .scc_ram_offset = 0x3000,
+ * .hecc_ram_offset = 0x3000,
+ * .mbx_offset = 0x2000,
+ * .int_line = 0,
+ * .revision = 1,
+ * };
+ *
+ * Please see include/can/platform/ti_hecc.h for description of above fields
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/can/platform/ti_hecc.h>
+
+#define DRV_NAME "ti_hecc"
+#define HECC_MODULE_VERSION "0.7"
+MODULE_VERSION(HECC_MODULE_VERSION);
+#define DRV_DESC "TI High End CAN Controller Driver " HECC_MODULE_VERSION
+
+/* TX / RX Mailbox Configuration */
+#define HECC_MAX_MAILBOXES 32 /* hardware mailboxes - do not change */
+#define MAX_TX_PRIO 0x3F /* hardware value - do not change */
+
+/*
+ * Important Note: TX mailbox configuration
+ * TX mailboxes should be restricted to the number of SKB buffers to avoid
+ * maintaining SKB buffers separately. TX mailboxes should be a power of 2
+ * for the mailbox logic to work. Top mailbox numbers are reserved for RX
+ * and lower mailboxes for TX.
+ *
+ * HECC_MAX_TX_MBOX HECC_MB_TX_SHIFT
+ * 4 (default) 2
+ * 8 3
+ * 16 4
+ */
+#define HECC_MB_TX_SHIFT 2 /* as per table above */
+#define HECC_MAX_TX_MBOX BIT(HECC_MB_TX_SHIFT)
+
+#define HECC_TX_PRIO_SHIFT (HECC_MB_TX_SHIFT)
+#define HECC_TX_PRIO_MASK (MAX_TX_PRIO << HECC_MB_TX_SHIFT)
+#define HECC_TX_MB_MASK (HECC_MAX_TX_MBOX - 1)
+#define HECC_TX_MASK ((HECC_MAX_TX_MBOX - 1) | HECC_TX_PRIO_MASK)
+#define HECC_TX_MBOX_MASK (~(BIT(HECC_MAX_TX_MBOX) - 1))
+#define HECC_DEF_NAPI_WEIGHT HECC_MAX_RX_MBOX
+
+/*
+ * Important Note: RX mailbox configuration
+ * RX mailboxes are further logically split into two - main and buffer
+ * mailboxes. The goal is to get all packets into main mailboxes as
+ * driven by mailbox number and receive priority (higher to lower) and
+ * buffer mailboxes are used to receive pkts while main mailboxes are being
+ * processed. This ensures in-order packet reception.
+ *
+ * Here are the recommended values for buffer mailbox. Note that RX mailboxes
+ * start after TX mailboxes:
+ *
+ * HECC_MAX_RX_MBOX HECC_RX_BUFFER_MBOX No of buffer mailboxes
+ * 28 12 8
+ * 16 20 4
+ */
+
+#define HECC_MAX_RX_MBOX (HECC_MAX_MAILBOXES - HECC_MAX_TX_MBOX)
+#define HECC_RX_BUFFER_MBOX 12 /* as per table above */
+#define HECC_RX_FIRST_MBOX (HECC_MAX_MAILBOXES - 1)
+#define HECC_RX_HIGH_MBOX_MASK (~(BIT(HECC_RX_BUFFER_MBOX) - 1))
+
+/* TI HECC module registers */
+#define HECC_CANME 0x0 /* Mailbox enable */
+#define HECC_CANMD 0x4 /* Mailbox direction */
+#define HECC_CANTRS 0x8 /* Transmit request set */
+#define HECC_CANTRR 0xC /* Transmit request */
+#define HECC_CANTA 0x10 /* Transmission acknowledge */
+#define HECC_CANAA 0x14 /* Abort acknowledge */
+#define HECC_CANRMP 0x18 /* Receive message pending */
+#define HECC_CANRML 0x1C /* Remote message lost */
+#define HECC_CANRFP 0x20 /* Remote frame pending */
+#define HECC_CANGAM 0x24 /* SECC only:Global acceptance mask */
+#define HECC_CANMC 0x28 /* Master control */
+#define HECC_CANBTC 0x2C /* Bit timing configuration */
+#define HECC_CANES 0x30 /* Error and status */
+#define HECC_CANTEC 0x34 /* Transmit error counter */
+#define HECC_CANREC 0x38 /* Receive error counter */
+#define HECC_CANGIF0 0x3C /* Global interrupt flag 0 */
+#define HECC_CANGIM 0x40 /* Global interrupt mask */
+#define HECC_CANGIF1 0x44 /* Global interrupt flag 1 */
+#define HECC_CANMIM 0x48 /* Mailbox interrupt mask */
+#define HECC_CANMIL 0x4C /* Mailbox interrupt level */
+#define HECC_CANOPC 0x50 /* Overwrite protection control */
+#define HECC_CANTIOC 0x54 /* Transmit I/O control */
+#define HECC_CANRIOC 0x58 /* Receive I/O control */
+#define HECC_CANLNT 0x5C /* HECC only: Local network time */
+#define HECC_CANTOC 0x60 /* HECC only: Time-out control */
+#define HECC_CANTOS 0x64 /* HECC only: Time-out status */
+#define HECC_CANTIOCE 0x68 /* SCC only:Enhanced TX I/O control */
+#define HECC_CANRIOCE 0x6C /* SCC only:Enhanced RX I/O control */
+
+/* Mailbox registers */
+#define HECC_CANMID 0x0
+#define HECC_CANMCF 0x4
+#define HECC_CANMDL 0x8
+#define HECC_CANMDH 0xC
+
+#define HECC_SET_REG 0xFFFFFFFF
+#define HECC_CANID_MASK 0x3FF /* 18 bits mask for extended id's */
+#define HECC_CCE_WAIT_COUNT 100 /* Wait for ~1 sec for CCE bit */
+
+#define HECC_CANMC_SCM BIT(13) /* SCC compat mode */
+#define HECC_CANMC_CCR BIT(12) /* Change config request */
+#define HECC_CANMC_PDR BIT(11) /* Local Power down - for sleep mode */
+#define HECC_CANMC_ABO BIT(7) /* Auto Bus On */
+#define HECC_CANMC_STM BIT(6) /* Self test mode - loopback */
+#define HECC_CANMC_SRES BIT(5) /* Software reset */
+
+#define HECC_CANTIOC_EN BIT(3) /* Enable CAN TX I/O pin */
+#define HECC_CANRIOC_EN BIT(3) /* Enable CAN RX I/O pin */
+
+#define HECC_CANMID_IDE BIT(31) /* Extended frame format */
+#define HECC_CANMID_AME BIT(30) /* Acceptance mask enable */
+#define HECC_CANMID_AAM BIT(29) /* Auto answer mode */
+
+#define HECC_CANES_FE BIT(24) /* form error */
+#define HECC_CANES_BE BIT(23) /* bit error */
+#define HECC_CANES_SA1 BIT(22) /* stuck at dominant error */
+#define HECC_CANES_CRCE BIT(21) /* CRC error */
+#define HECC_CANES_SE BIT(20) /* stuff bit error */
+#define HECC_CANES_ACKE BIT(19) /* ack error */
+#define HECC_CANES_BO BIT(18) /* Bus off status */
+#define HECC_CANES_EP BIT(17) /* Error passive status */
+#define HECC_CANES_EW BIT(16) /* Error warning status */
+#define HECC_CANES_SMA BIT(5) /* suspend mode ack */
+#define HECC_CANES_CCE BIT(4) /* Change config enabled */
+#define HECC_CANES_PDA BIT(3) /* Power down mode ack */
+
+#define HECC_CANBTC_SAM BIT(7) /* sample points */
+
+#define HECC_BUS_ERROR (HECC_CANES_FE | HECC_CANES_BE |\
+ HECC_CANES_CRCE | HECC_CANES_SE |\
+ HECC_CANES_ACKE)
+
+#define HECC_CANMCF_RTR BIT(4) /* Remote transmit request */
+
+#define HECC_CANGIF_MAIF BIT(17) /* Message alarm interrupt */
+#define HECC_CANGIF_TCOIF BIT(16) /* Timer counter overflow int */
+#define HECC_CANGIF_GMIF BIT(15) /* Global mailbox interrupt */
+#define HECC_CANGIF_AAIF BIT(14) /* Abort ack interrupt */
+#define HECC_CANGIF_WDIF BIT(13) /* Write denied interrupt */
+#define HECC_CANGIF_WUIF BIT(12) /* Wake up interrupt */
+#define HECC_CANGIF_RMLIF BIT(11) /* Receive message lost interrupt */
+#define HECC_CANGIF_BOIF BIT(10) /* Bus off interrupt */
+#define HECC_CANGIF_EPIF BIT(9) /* Error passive interrupt */
+#define HECC_CANGIF_WLIF BIT(8) /* Warning level interrupt */
+#define HECC_CANGIF_MBOX_MASK 0x1F /* Mailbox number mask */
+#define HECC_CANGIM_I1EN BIT(1) /* Int line 1 enable */
+#define HECC_CANGIM_I0EN BIT(0) /* Int line 0 enable */
+#define HECC_CANGIM_DEF_MASK 0x700 /* only busoff/warning/passive */
+#define HECC_CANGIM_SIL BIT(2) /* system interrupts to int line 1 */
+
+/* CAN Bittiming constants as per HECC specs */
+static struct can_bittiming_const ti_hecc_bittiming_const = {
+ .name = DRV_NAME,
+ .tseg1_min = 1,
+ .tseg1_max = 16,
+ .tseg2_min = 1,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 256,
+ .brp_inc = 1,
+};
+
+struct ti_hecc_priv {
+ struct can_priv can; /* MUST be first member/field */
+ struct napi_struct napi;
+ struct net_device *ndev;
+ struct clk *clk;
+ void __iomem *base;
+ u32 scc_ram_offset;
+ u32 hecc_ram_offset;
+ u32 mbx_offset;
+ u32 int_line;
+ spinlock_t mbx_lock; /* CANME register needs protection */
+ u32 tx_head;
+ u32 tx_tail;
+ u32 rx_next;
+};
+
+static inline int get_tx_head_mb(struct ti_hecc_priv *priv)
+{
+ return priv->tx_head & HECC_TX_MB_MASK;
+}
+
+static inline int get_tx_tail_mb(struct ti_hecc_priv *priv)
+{
+ return priv->tx_tail & HECC_TX_MB_MASK;
+}
+
+static inline int get_tx_head_prio(struct ti_hecc_priv *priv)
+{
+ return (priv->tx_head >> HECC_TX_PRIO_SHIFT) & MAX_TX_PRIO;
+}
+
+static inline void hecc_write_lam(struct ti_hecc_priv *priv, u32 mbxno, u32 val)
+{
+ __raw_writel(val, priv->base + priv->hecc_ram_offset + mbxno * 4);
+}
+
+static inline void hecc_write_mbx(struct ti_hecc_priv *priv, u32 mbxno,
+ u32 reg, u32 val)
+{
+ __raw_writel(val, priv->base + priv->mbx_offset + mbxno * 0x10 +
+ reg);
+}
+
+static inline u32 hecc_read_mbx(struct ti_hecc_priv *priv, u32 mbxno, u32 reg)
+{
+ return __raw_readl(priv->base + priv->mbx_offset + mbxno * 0x10 +
+ reg);
+}
+
+static inline void hecc_write(struct ti_hecc_priv *priv, u32 reg, u32 val)
+{
+ __raw_writel(val, priv->base + reg);
+}
+
+static inline u32 hecc_read(struct ti_hecc_priv *priv, int reg)
+{
+ return __raw_readl(priv->base + reg);
+}
+
+static inline void hecc_set_bit(struct ti_hecc_priv *priv, int reg,
+ u32 bit_mask)
+{
+ hecc_write(priv, reg, hecc_read(priv, reg) | bit_mask);
+}
+
+static inline void hecc_clear_bit(struct ti_hecc_priv *priv, int reg,
+ u32 bit_mask)
+{
+ hecc_write(priv, reg, hecc_read(priv, reg) & ~bit_mask);
+}
+
+static inline u32 hecc_get_bit(struct ti_hecc_priv *priv, int reg, u32 bit_mask)
+{
+ return (hecc_read(priv, reg) & bit_mask) ? 1 : 0;
+}
+
+static int ti_hecc_get_state(const struct net_device *ndev,
+ enum can_state *state)
+{
+ struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+ *state = priv->can.state;
+ return 0;
+}
+
+static int ti_hecc_set_btc(struct ti_hecc_priv *priv)
+{
+ struct can_bittiming *bit_timing = &priv->can.bittiming;
+ u32 can_btc;
+
+ can_btc = (bit_timing->phase_seg2 - 1) & 0x7;
+ can_btc |= ((bit_timing->phase_seg1 + bit_timing->prop_seg - 1)
+ & 0xF) << 3;
+ if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) {
+ if (bit_timing->brp > 4)
+ can_btc |= HECC_CANBTC_SAM;
+ else
+ dev_warn(priv->ndev->dev.parent, "WARN: Triple" \
+ "sampling not set due to h/w limitations");
+ }
+ can_btc |= ((bit_timing->sjw - 1) & 0x3) << 8;
+ can_btc |= ((bit_timing->brp - 1) & 0xFF) << 16;
+
+ /* ERM being set to 0 by default meaning resync at falling edge */
+
+ hecc_write(priv, HECC_CANBTC, can_btc);
+ dev_info(priv->ndev->dev.parent, "setting CANBTC=%#x\n", can_btc);
+
+ return 0;
+}
+
+static void ti_hecc_reset(struct net_device *ndev)
+{
+ u32 cnt;
+ struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+ dev_dbg(ndev->dev.parent, "resetting hecc ...\n");
+ hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_SRES);
+
+ /* Set change control request and wait till enabled */
+ hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+
+ /*
+ * INFO: It has been observed that at times CCE bit may not be
+ * set and hw seems to be ok even if this bit is not set so
+ * timing out with a timing of 1ms to respect the specs
+ */
+ cnt = HECC_CCE_WAIT_COUNT;
+ while (!hecc_get_bit(priv, HECC_CANES, HECC_CANES_CCE) && cnt != 0) {
+ --cnt;
+ udelay(10);
+ }
+
+ /*
+ * Note: On HECC, BTC can be programmed only in initialization mode, so
+ * it is expected that the can bittiming parameters are set via ip
+ * utility before the device is opened
+ */
+ ti_hecc_set_btc(priv);
+
+ /* Clear CCR (and CANMC register) and wait for CCE = 0 enable */
+ hecc_write(priv, HECC_CANMC, 0);
+
+ /*
+ * INFO: CAN net stack handles bus off and hence disabling auto-bus-on
+ * hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_ABO);
+ */
+
+ /*
+ * INFO: It has been observed that at times CCE bit may not be
+ * set and hw seems to be ok even if this bit is not set so
+ */
+ cnt = HECC_CCE_WAIT_COUNT;
+ while (hecc_get_bit(priv, HECC_CANES, HECC_CANES_CCE) && cnt != 0) {
+ --cnt;
+ udelay(10);
+ }
+
+ /* Enable TX and RX I/O Control pins */
+ hecc_write(priv, HECC_CANTIOC, HECC_CANTIOC_EN);
+ hecc_write(priv, HECC_CANRIOC, HECC_CANRIOC_EN);
+
+ /* Clear registers for clean operation */
+ hecc_write(priv, HECC_CANTA, HECC_SET_REG);
+ hecc_write(priv, HECC_CANRMP, HECC_SET_REG);
+ hecc_write(priv, HECC_CANGIF0, HECC_SET_REG);
+ hecc_write(priv, HECC_CANGIF1, HECC_SET_REG);
+ hecc_write(priv, HECC_CANME, 0);
+ hecc_write(priv, HECC_CANMD, 0);
+
+ /* SCC compat mode NOT supported (and not needed too) */
+ hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_SCM);
+}
+
+static void ti_hecc_start(struct net_device *ndev)
+{
+ struct ti_hecc_priv *priv = netdev_priv(ndev);
+ u32 cnt, mbxno, mbx_mask;
+
+ /* put HECC in initialization mode and set btc */
+ ti_hecc_reset(ndev);
+
+ priv->tx_head = priv->tx_tail = HECC_TX_MASK;
+ priv->rx_next = HECC_RX_FIRST_MBOX;
+
+ /* Enable local and global acceptance mask registers */
+ hecc_write(priv, HECC_CANGAM, HECC_SET_REG);
+
+ /* Prepare configured mailboxes to receive messages */
+ for (cnt = 0; cnt < HECC_MAX_RX_MBOX; cnt++) {
+ mbxno = HECC_MAX_MAILBOXES - 1 - cnt;
+ mbx_mask = BIT(mbxno);
+ hecc_clear_bit(priv, HECC_CANME, mbx_mask);
+ hecc_write_mbx(priv, mbxno, HECC_CANMID, HECC_CANMID_AME);
+ hecc_write_lam(priv, mbxno, HECC_SET_REG);
+ hecc_set_bit(priv, HECC_CANMD, mbx_mask);
+ hecc_set_bit(priv, HECC_CANME, mbx_mask);
+ hecc_set_bit(priv, HECC_CANMIM, mbx_mask);
+ }
+
+ /* Prevent message over-write & Enable interrupts */
+ hecc_write(priv, HECC_CANOPC, HECC_SET_REG);
+ if (priv->int_line) {
+ hecc_write(priv, HECC_CANMIL, HECC_SET_REG);
+ hecc_write(priv, HECC_CANGIM, HECC_CANGIM_DEF_MASK |
+ HECC_CANGIM_I1EN | HECC_CANGIM_SIL);
+ } else {
+ hecc_write(priv, HECC_CANMIL, 0);
+ hecc_write(priv, HECC_CANGIM,
+ HECC_CANGIM_DEF_MASK | HECC_CANGIM_I0EN);
+ }
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+}
+
+static void ti_hecc_stop(struct net_device *ndev)
+{
+ struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+ /* Disable interrupts and disable mailboxes */
+ hecc_write(priv, HECC_CANGIM, 0);
+ hecc_write(priv, HECC_CANMIM, 0);
+ hecc_write(priv, HECC_CANME, 0);
+ priv->can.state = CAN_STATE_STOPPED;
+}
+
+static int ti_hecc_do_set_mode(struct net_device *ndev, enum can_mode mode)
+{
+ int ret = 0;
+
+ switch (mode) {
+ case CAN_MODE_START:
+ ti_hecc_start(ndev);
+ netif_wake_queue(ndev);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * ti_hecc_xmit: HECC Transmit
+ *
+ * The transmit mailboxes start from 0 to HECC_MAX_TX_MBOX. In HECC the
+ * priority of the mailbox for tranmission is dependent upon priority setting
+ * field in mailbox registers. The mailbox with highest value in priority field
+ * is transmitted first. Only when two mailboxes have the same value in
+ * priority field the highest numbered mailbox is transmitted first.
+ *
+ * To utilize the HECC priority feature as described above we start with the
+ * highest numbered mailbox with highest priority level and move on to the next
+ * mailbox with the same priority level and so on. Once we loop through all the
+ * transmit mailboxes we choose the next priority level (lower) and so on
+ * until we reach the lowest priority level on the lowest numbered mailbox
+ * when we stop transmission until all mailboxes are transmitted and then
+ * restart at highest numbered mailbox with highest priority.
+ *
+ * Two counters (head and tail) are used to track the next mailbox to transmit
+ * and to track the echo buffer for already transmitted mailbox. The queue
+ * is stopped when all the mailboxes are busy or when there is a priority
+ * value roll-over happens.
+ */
+static netdev_tx_t ti_hecc_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct ti_hecc_priv *priv = netdev_priv(ndev);
+ struct can_frame *cf = (struct can_frame *)skb->data;
+ u32 mbxno, mbx_mask, data;
+ unsigned long flags;
+
+ mbxno = get_tx_head_mb(priv);
+ mbx_mask = BIT(mbxno);
+ spin_lock_irqsave(&priv->mbx_lock, flags);
+ if (unlikely(hecc_read(priv, HECC_CANME) & mbx_mask)) {
+ spin_unlock_irqrestore(&priv->mbx_lock, flags);
+ netif_stop_queue(ndev);
+ dev_err(priv->ndev->dev.parent,
+ "BUG: TX mbx not ready tx_head=%08X, tx_tail=%08X\n",
+ priv->tx_head, priv->tx_tail);
+ return NETDEV_TX_BUSY;
+ }
+ spin_unlock_irqrestore(&priv->mbx_lock, flags);
+
+ /* Prepare mailbox for transmission */
+ data = min_t(u8, cf->can_dlc, 8);
+ if (cf->can_id & CAN_RTR_FLAG) /* Remote transmission request */
+ data |= HECC_CANMCF_RTR;
+ data |= get_tx_head_prio(priv) << 8;
+ hecc_write_mbx(priv, mbxno, HECC_CANMCF, data);
+
+ if (cf->can_id & CAN_EFF_FLAG) /* Extended frame format */
+ data = (cf->can_id & CAN_EFF_MASK) | HECC_CANMID_IDE;
+ else /* Standard frame format */
+ data = (cf->can_id & CAN_SFF_MASK) << 18;
+ hecc_write_mbx(priv, mbxno, HECC_CANMID, data);
+ hecc_write_mbx(priv, mbxno, HECC_CANMDL,
+ be32_to_cpu(*(u32 *)(cf->data)));
+ if (cf->can_dlc > 4)
+ hecc_write_mbx(priv, mbxno, HECC_CANMDH,
+ be32_to_cpu(*(u32 *)(cf->data + 4)));
+ else
+ *(u32 *)(cf->data + 4) = 0;
+ can_put_echo_skb(skb, ndev, mbxno);
+
+ spin_lock_irqsave(&priv->mbx_lock, flags);
+ --priv->tx_head;
+ if ((hecc_read(priv, HECC_CANME) & BIT(get_tx_head_mb(priv))) ||
+ (priv->tx_head & HECC_TX_MASK) == HECC_TX_MASK) {
+ netif_stop_queue(ndev);
+ }
+ hecc_set_bit(priv, HECC_CANME, mbx_mask);
+ spin_unlock_irqrestore(&priv->mbx_lock, flags);
+
+ hecc_clear_bit(priv, HECC_CANMD, mbx_mask);
+ hecc_set_bit(priv, HECC_CANMIM, mbx_mask);
+ hecc_write(priv, HECC_CANTRS, mbx_mask);
+
+ return NETDEV_TX_OK;
+}
+
+static int ti_hecc_rx_pkt(struct ti_hecc_priv *priv, int mbxno)
+{
+ struct net_device_stats *stats = &priv->ndev->stats;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+ u32 data, mbx_mask;
+ unsigned long flags;
+
+ skb = alloc_can_skb(priv->ndev, &cf);
+ if (!skb) {
+ if (printk_ratelimit())
+ dev_err(priv->ndev->dev.parent,
+ "ti_hecc_rx_pkt: alloc_can_skb() failed\n");
+ return -ENOMEM;
+ }
+
+ mbx_mask = BIT(mbxno);
+ data = hecc_read_mbx(priv, mbxno, HECC_CANMID);
+ if (data & HECC_CANMID_IDE)
+ cf->can_id = (data & CAN_EFF_MASK) | CAN_EFF_FLAG;
+ else
+ cf->can_id = (data >> 18) & CAN_SFF_MASK;
+ data = hecc_read_mbx(priv, mbxno, HECC_CANMCF);
+ if (data & HECC_CANMCF_RTR)
+ cf->can_id |= CAN_RTR_FLAG;
+ cf->can_dlc = data & 0xF;
+ data = hecc_read_mbx(priv, mbxno, HECC_CANMDL);
+ *(u32 *)(cf->data) = cpu_to_be32(data);
+ if (cf->can_dlc > 4) {
+ data = hecc_read_mbx(priv, mbxno, HECC_CANMDH);
+ *(u32 *)(cf->data + 4) = cpu_to_be32(data);
+ } else {
+ *(u32 *)(cf->data + 4) = 0;
+ }
+ spin_lock_irqsave(&priv->mbx_lock, flags);
+ hecc_clear_bit(priv, HECC_CANME, mbx_mask);
+ hecc_write(priv, HECC_CANRMP, mbx_mask);
+ /* enable mailbox only if it is part of rx buffer mailboxes */
+ if (priv->rx_next < HECC_RX_BUFFER_MBOX)
+ hecc_set_bit(priv, HECC_CANME, mbx_mask);
+ spin_unlock_irqrestore(&priv->mbx_lock, flags);
+
+ stats->rx_bytes += cf->can_dlc;
+ netif_receive_skb(skb);
+ stats->rx_packets++;
+
+ return 0;
+}
+
+/*
+ * ti_hecc_rx_poll - HECC receive pkts
+ *
+ * The receive mailboxes start from highest numbered mailbox till last xmit
+ * mailbox. On CAN frame reception the hardware places the data into highest
+ * numbered mailbox that matches the CAN ID filter. Since all receive mailboxes
+ * have same filtering (ALL CAN frames) packets will arrive in the highest
+ * available RX mailbox and we need to ensure in-order packet reception.
+ *
+ * To ensure the packets are received in the right order we logically divide
+ * the RX mailboxes into main and buffer mailboxes. Packets are received as per
+ * mailbox priotity (higher to lower) in the main bank and once it is full we
+ * disable further reception into main mailboxes. While the main mailboxes are
+ * processed in NAPI, further packets are received in buffer mailboxes.
+ *
+ * We maintain a RX next mailbox counter to process packets and once all main
+ * mailboxe packets are passed to the upper stack we enable all of them but
+ * continue to process packets received in buffer mailboxes. With each packet
+ * received from buffer mailbox we enable it immediately so as to handle the
+ * overflow from higher mailboxes.
+ */
+static int ti_hecc_rx_poll(struct napi_struct *napi, int quota)
+{
+ struct net_device *ndev = napi->dev;
+ struct ti_hecc_priv *priv = netdev_priv(ndev);
+ u32 num_pkts = 0;
+ u32 mbx_mask;
+ unsigned long pending_pkts, flags;
+
+ if (!netif_running(ndev))
+ return 0;
+
+ while ((pending_pkts = hecc_read(priv, HECC_CANRMP)) &&
+ num_pkts < quota) {
+ mbx_mask = BIT(priv->rx_next); /* next rx mailbox to process */
+ if (mbx_mask & pending_pkts) {
+ if (ti_hecc_rx_pkt(priv, priv->rx_next) < 0)
+ return num_pkts;
+ ++num_pkts;
+ } else if (priv->rx_next > HECC_RX_BUFFER_MBOX) {
+ break; /* pkt not received yet */
+ }
+ --priv->rx_next;
+ if (priv->rx_next == HECC_RX_BUFFER_MBOX) {
+ /* enable high bank mailboxes */
+ spin_lock_irqsave(&priv->mbx_lock, flags);
+ mbx_mask = hecc_read(priv, HECC_CANME);
+ mbx_mask |= HECC_RX_HIGH_MBOX_MASK;
+ hecc_write(priv, HECC_CANME, mbx_mask);
+ spin_unlock_irqrestore(&priv->mbx_lock, flags);
+ } else if (priv->rx_next == HECC_MAX_TX_MBOX - 1) {
+ priv->rx_next = HECC_RX_FIRST_MBOX;
+ break;
+ }
+ }
+
+ /* Enable packet interrupt if all pkts are handled */
+ if (hecc_read(priv, HECC_CANRMP) == 0) {
+ napi_complete(napi);
+ /* Re-enable RX mailbox interrupts */
+ mbx_mask = hecc_read(priv, HECC_CANMIM);
+ mbx_mask |= HECC_TX_MBOX_MASK;
+ hecc_write(priv, HECC_CANMIM, mbx_mask);
+ }
+
+ return num_pkts;
+}
+
+static int ti_hecc_error(struct net_device *ndev, int int_status,
+ int err_status)
+{
+ struct ti_hecc_priv *priv = netdev_priv(ndev);
+ struct net_device_stats *stats = &ndev->stats;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+
+ /* propogate the error condition to the can stack */
+ skb = alloc_can_err_skb(ndev, &cf);
+ if (!skb) {
+ if (printk_ratelimit())
+ dev_err(priv->ndev->dev.parent,
+ "ti_hecc_error: alloc_can_err_skb() failed\n");
+ return -ENOMEM;
+ }
+
+ if (int_status & HECC_CANGIF_WLIF) { /* warning level int */
+ if ((int_status & HECC_CANGIF_BOIF) == 0) {
+ priv->can.state = CAN_STATE_ERROR_WARNING;
+ ++priv->can.can_stats.error_warning;
+ cf->can_id |= CAN_ERR_CRTL;
+ if (hecc_read(priv, HECC_CANTEC) > 96)
+ cf->data[1] |= CAN_ERR_CRTL_TX_WARNING;
+ if (hecc_read(priv, HECC_CANREC) > 96)
+ cf->data[1] |= CAN_ERR_CRTL_RX_WARNING;
+ }
+ hecc_set_bit(priv, HECC_CANES, HECC_CANES_EW);
+ dev_dbg(priv->ndev->dev.parent, "Error Warning interrupt\n");
+ hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+ }
+
+ if (int_status & HECC_CANGIF_EPIF) { /* error passive int */
+ if ((int_status & HECC_CANGIF_BOIF) == 0) {
+ priv->can.state = CAN_STATE_ERROR_PASSIVE;
+ ++priv->can.can_stats.error_passive;
+ cf->can_id |= CAN_ERR_CRTL;
+ if (hecc_read(priv, HECC_CANTEC) > 127)
+ cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
+ if (hecc_read(priv, HECC_CANREC) > 127)
+ cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
+ }
+ hecc_set_bit(priv, HECC_CANES, HECC_CANES_EP);
+ dev_dbg(priv->ndev->dev.parent, "Error passive interrupt\n");
+ hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+ }
+
+ /*
+ * Need to check busoff condition in error status register too to
+ * ensure warning interrupts don't hog the system
+ */
+ if ((int_status & HECC_CANGIF_BOIF) || (err_status & HECC_CANES_BO)) {
+ priv->can.state = CAN_STATE_BUS_OFF;
+ cf->can_id |= CAN_ERR_BUSOFF;
+ hecc_set_bit(priv, HECC_CANES, HECC_CANES_BO);
+ hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+ /* Disable all interrupts in bus-off to avoid int hog */
+ hecc_write(priv, HECC_CANGIM, 0);
+ can_bus_off(ndev);
+ }
+
+ if (err_status & HECC_BUS_ERROR) {
+ ++priv->can.can_stats.bus_error;
+ cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT;
+ cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+ if (err_status & HECC_CANES_FE) {
+ hecc_set_bit(priv, HECC_CANES, HECC_CANES_FE);
+ cf->data[2] |= CAN_ERR_PROT_FORM;
+ }
+ if (err_status & HECC_CANES_BE) {
+ hecc_set_bit(priv, HECC_CANES, HECC_CANES_BE);
+ cf->data[2] |= CAN_ERR_PROT_BIT;
+ }
+ if (err_status & HECC_CANES_SE) {
+ hecc_set_bit(priv, HECC_CANES, HECC_CANES_SE);
+ cf->data[2] |= CAN_ERR_PROT_STUFF;
+ }
+ if (err_status & HECC_CANES_CRCE) {
+ hecc_set_bit(priv, HECC_CANES, HECC_CANES_CRCE);
+ cf->data[2] |= CAN_ERR_PROT_LOC_CRC_SEQ |
+ CAN_ERR_PROT_LOC_CRC_DEL;
+ }
+ if (err_status & HECC_CANES_ACKE) {
+ hecc_set_bit(priv, HECC_CANES, HECC_CANES_ACKE);
+ cf->data[2] |= CAN_ERR_PROT_LOC_ACK |
+ CAN_ERR_PROT_LOC_ACK_DEL;
+ }
+ }
+
+ netif_receive_skb(skb);
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+ return 0;
+}
+
+static irqreturn_t ti_hecc_interrupt(int irq, void *dev_id)
+{
+ struct net_device *ndev = (struct net_device *)dev_id;
+ struct ti_hecc_priv *priv = netdev_priv(ndev);
+ struct net_device_stats *stats = &ndev->stats;
+ u32 mbxno, mbx_mask, int_status, err_status;
+ unsigned long ack, flags;
+
+ int_status = hecc_read(priv,
+ (priv->int_line) ? HECC_CANGIF1 : HECC_CANGIF0);
+
+ if (!int_status)
+ return IRQ_NONE;
+
+ err_status = hecc_read(priv, HECC_CANES);
+ if (err_status & (HECC_BUS_ERROR | HECC_CANES_BO |
+ HECC_CANES_EP | HECC_CANES_EW))
+ ti_hecc_error(ndev, int_status, err_status);
+
+ if (int_status & HECC_CANGIF_GMIF) {
+ while (priv->tx_tail - priv->tx_head > 0) {
+ mbxno = get_tx_tail_mb(priv);
+ mbx_mask = BIT(mbxno);
+ if (!(mbx_mask & hecc_read(priv, HECC_CANTA)))
+ break;
+ hecc_clear_bit(priv, HECC_CANMIM, mbx_mask);
+ hecc_write(priv, HECC_CANTA, mbx_mask);
+ spin_lock_irqsave(&priv->mbx_lock, flags);
+ hecc_clear_bit(priv, HECC_CANME, mbx_mask);
+ spin_unlock_irqrestore(&priv->mbx_lock, flags);
+ stats->tx_bytes += hecc_read_mbx(priv, mbxno,
+ HECC_CANMCF) & 0xF;
+ stats->tx_packets++;
+ can_get_echo_skb(ndev, mbxno);
+ --priv->tx_tail;
+ }
+
+ /* restart queue if wrap-up or if queue stalled on last pkt */
+ if (((priv->tx_head == priv->tx_tail) &&
+ ((priv->tx_head & HECC_TX_MASK) != HECC_TX_MASK)) ||
+ (((priv->tx_tail & HECC_TX_MASK) == HECC_TX_MASK) &&
+ ((priv->tx_head & HECC_TX_MASK) == HECC_TX_MASK)))
+ netif_wake_queue(ndev);
+
+ /* Disable RX mailbox interrupts and let NAPI reenable them */
+ if (hecc_read(priv, HECC_CANRMP)) {
+ ack = hecc_read(priv, HECC_CANMIM);
+ ack &= BIT(HECC_MAX_TX_MBOX) - 1;
+ hecc_write(priv, HECC_CANMIM, ack);
+ napi_schedule(&priv->napi);
+ }
+ }
+
+ /* clear all interrupt conditions - read back to avoid spurious ints */
+ if (priv->int_line) {
+ hecc_write(priv, HECC_CANGIF1, HECC_SET_REG);
+ int_status = hecc_read(priv, HECC_CANGIF1);
+ } else {
+ hecc_write(priv, HECC_CANGIF0, HECC_SET_REG);
+ int_status = hecc_read(priv, HECC_CANGIF0);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ti_hecc_open(struct net_device *ndev)
+{
+ struct ti_hecc_priv *priv = netdev_priv(ndev);
+ int err;
+
+ err = request_irq(ndev->irq, ti_hecc_interrupt, IRQF_SHARED,
+ ndev->name, ndev);
+ if (err) {
+ dev_err(ndev->dev.parent, "error requesting interrupt\n");
+ return err;
+ }
+
+ /* Open common can device */
+ err = open_candev(ndev);
+ if (err) {
+ dev_err(ndev->dev.parent, "open_candev() failed %d\n", err);
+ free_irq(ndev->irq, ndev);
+ return err;
+ }
+
+ clk_enable(priv->clk);
+ ti_hecc_start(ndev);
+ napi_enable(&priv->napi);
+ netif_start_queue(ndev);
+
+ return 0;
+}
+
+static int ti_hecc_close(struct net_device *ndev)
+{
+ struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+ netif_stop_queue(ndev);
+ napi_disable(&priv->napi);
+ ti_hecc_stop(ndev);
+ free_irq(ndev->irq, ndev);
+ clk_disable(priv->clk);
+ close_candev(ndev);
+
+ return 0;
+}
+
+static const struct net_device_ops ti_hecc_netdev_ops = {
+ .ndo_open = ti_hecc_open,
+ .ndo_stop = ti_hecc_close,
+ .ndo_start_xmit = ti_hecc_xmit,
+};
+
+static int ti_hecc_probe(struct platform_device *pdev)
+{
+ struct net_device *ndev = (struct net_device *)0;
+ struct ti_hecc_priv *priv;
+ struct ti_hecc_platform_data *pdata;
+ struct resource *mem, *irq;
+ void __iomem *addr;
+ int err = -ENODEV;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data\n");
+ goto probe_exit;
+ }
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "No mem resources\n");
+ goto probe_exit;
+ }
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "No irq resource\n");
+ goto probe_exit;
+ }
+ if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) {
+ dev_err(&pdev->dev, "HECC region already claimed\n");
+ err = -EBUSY;
+ goto probe_exit;
+ }
+ addr = ioremap(mem->start, resource_size(mem));
+ if (!addr) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ err = -ENOMEM;
+ goto probe_exit_free_region;
+ }
+
+ ndev = alloc_candev(sizeof(struct ti_hecc_priv), HECC_MAX_TX_MBOX);
+ if (!ndev) {
+ dev_err(&pdev->dev, "alloc_candev failed\n");
+ err = -ENOMEM;
+ goto probe_exit_iounmap;
+ }
+
+ priv = netdev_priv(ndev);
+ priv->ndev = ndev;
+ priv->base = addr;
+ priv->scc_ram_offset = pdata->scc_ram_offset;
+ priv->hecc_ram_offset = pdata->hecc_ram_offset;
+ priv->mbx_offset = pdata->mbx_offset;
+ priv->int_line = pdata->int_line;
+
+ priv->can.bittiming_const = &ti_hecc_bittiming_const;
+ priv->can.do_set_mode = ti_hecc_do_set_mode;
+ priv->can.do_get_state = ti_hecc_get_state;
+
+ ndev->irq = irq->start;
+ ndev->flags |= IFF_ECHO;
+ platform_set_drvdata(pdev, ndev);
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+ ndev->netdev_ops = &ti_hecc_netdev_ops;
+
+ priv->clk = clk_get(&pdev->dev, "hecc_ck");
+ if (IS_ERR(priv->clk)) {
+ dev_err(&pdev->dev, "No clock available\n");
+ err = PTR_ERR(priv->clk);
+ priv->clk = NULL;
+ goto probe_exit_candev;
+ }
+ priv->can.clock.freq = clk_get_rate(priv->clk);
+ netif_napi_add(ndev, &priv->napi, ti_hecc_rx_poll,
+ HECC_DEF_NAPI_WEIGHT);
+
+ err = register_candev(ndev);
+ if (err) {
+ dev_err(&pdev->dev, "register_candev() failed\n");
+ goto probe_exit_clk;
+ }
+ dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%u)\n",
+ priv->base, (u32) ndev->irq);
+
+ return 0;
+
+probe_exit_clk:
+ clk_put(priv->clk);
+probe_exit_candev:
+ free_candev(ndev);
+probe_exit_iounmap:
+ iounmap(addr);
+probe_exit_free_region:
+ release_mem_region(mem->start, resource_size(mem));
+probe_exit:
+ return err;
+}
+
+static int __devexit ti_hecc_remove(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+ clk_put(priv->clk);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ iounmap(priv->base);
+ release_mem_region(res->start, resource_size(res));
+ unregister_candev(ndev);
+ free_candev(ndev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+/* TI HECC netdevice driver: platform driver structure */
+static struct platform_driver ti_hecc_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = ti_hecc_probe,
+ .remove = __devexit_p(ti_hecc_remove),
+};
+
+static int __init ti_hecc_init_driver(void)
+{
+ printk(KERN_INFO DRV_DESC "\n");
+ return platform_driver_register(&ti_hecc_driver);
+}
+module_init(ti_hecc_init_driver);
+
+static void __exit ti_hecc_exit_driver(void)
+{
+ printk(KERN_INFO DRV_DESC " unloaded\n");
+ platform_driver_unregister(&ti_hecc_driver);
+}
+module_exit(ti_hecc_exit_driver);
+
+MODULE_AUTHOR("Anant Gole <anantgole@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION(DRV_DESC);
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index abdbd9c2b78..3e4419054c8 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -232,7 +232,7 @@ MODULE_DEVICE_TABLE(usb, ems_usb_table);
#define INTR_IN_BUFFER_SIZE 4
#define MAX_RX_URBS 10
-#define MAX_TX_URBS CAN_ECHO_SKB_MAX
+#define MAX_TX_URBS 10
struct ems_usb;
@@ -311,14 +311,10 @@ static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg)
int i;
struct net_device_stats *stats = &dev->netdev->stats;
- skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+ skb = alloc_can_skb(dev->netdev, &cf);
if (skb == NULL)
return;
- skb->protocol = htons(ETH_P_CAN);
-
- cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-
cf->can_id = le32_to_cpu(msg->msg.can_msg.id);
cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8);
@@ -346,18 +342,10 @@ static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg)
struct sk_buff *skb;
struct net_device_stats *stats = &dev->netdev->stats;
- skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+ skb = alloc_can_err_skb(dev->netdev, &cf);
if (skb == NULL)
return;
- skb->protocol = htons(ETH_P_CAN);
-
- cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
- memset(cf, 0, sizeof(struct can_frame));
-
- cf->can_id = CAN_ERR_FLAG;
- cf->can_dlc = CAN_ERR_DLC;
-
if (msg->type == CPC_MSG_TYPE_CAN_STATE) {
u8 state = msg->msg.can_state;
@@ -1015,7 +1003,7 @@ static int ems_usb_probe(struct usb_interface *intf,
struct ems_usb *dev;
int i, err = -ENOMEM;
- netdev = alloc_candev(sizeof(struct ems_usb));
+ netdev = alloc_candev(sizeof(struct ems_usb), MAX_TX_URBS);
if (!netdev) {
dev_err(netdev->dev.parent, "Couldn't alloc candev\n");
return -ENOMEM;
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 23:01:51 +0000