aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/chelsio/sge.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/chelsio/sge.c')
-rw-r--r--drivers/net/chelsio/sge.c115
1 files changed, 49 insertions, 66 deletions
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 0ca8d876e16..659cb2252e4 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1413,16 +1413,20 @@ static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len)
if (unlikely(adapter->vlan_grp && p->vlan_valid)) {
st->vlan_xtract++;
- if (adapter->params.sge.polling)
+#ifdef CONFIG_CHELSIO_T1_NAPI
vlan_hwaccel_receive_skb(skb, adapter->vlan_grp,
ntohs(p->vlan));
- else
+#else
vlan_hwaccel_rx(skb, adapter->vlan_grp,
ntohs(p->vlan));
- } else if (adapter->params.sge.polling)
+#endif
+ } else {
+#ifdef CONFIG_CHELSIO_T1_NAPI
netif_receive_skb(skb);
- else
+#else
netif_rx(skb);
+#endif
+ }
return 0;
}
@@ -1572,6 +1576,7 @@ static int process_responses(struct adapter *adapter, int budget)
return budget;
}
+#ifdef CONFIG_CHELSIO_T1_NAPI
/*
* A simpler version of process_responses() that handles only pure (i.e.,
* non data-carrying) responses. Such respones are too light-weight to justify
@@ -1619,92 +1624,76 @@ static int process_pure_responses(struct adapter *adapter, struct respQ_e *e)
* or protection from interrupts as data interrupts are off at this point and
* other adapter interrupts do not interfere.
*/
-static int t1_poll(struct net_device *dev, int *budget)
+int t1_poll(struct net_device *dev, int *budget)
{
struct adapter *adapter = dev->priv;
int effective_budget = min(*budget, dev->quota);
-
int work_done = process_responses(adapter, effective_budget);
+
*budget -= work_done;
dev->quota -= work_done;
if (work_done >= effective_budget)
return 1;
+ spin_lock_irq(&adapter->async_lock);
__netif_rx_complete(dev);
-
- /*
- * Because we don't atomically flush the following write it is
- * possible that in very rare cases it can reach the device in a way
- * that races with a new response being written plus an error interrupt
- * causing the NAPI interrupt handler below to return unhandled status
- * to the OS. To protect against this would require flushing the write
- * and doing both the write and the flush with interrupts off. Way too
- * expensive and unjustifiable given the rarity of the race.
- */
writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING);
- return 0;
-}
+ writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA,
+ adapter->regs + A_PL_ENABLE);
+ spin_unlock_irq(&adapter->async_lock);
-/*
- * Returns true if the device is already scheduled for polling.
- */
-static inline int napi_is_scheduled(struct net_device *dev)
-{
- return test_bit(__LINK_STATE_RX_SCHED, &dev->state);
+ return 0;
}
/*
* NAPI version of the main interrupt handler.
*/
-static irqreturn_t t1_interrupt_napi(int irq, void *data)
+irqreturn_t t1_interrupt(int irq, void *data)
{
- int handled;
struct adapter *adapter = data;
+ struct net_device *dev = adapter->sge->netdev;
struct sge *sge = adapter->sge;
- struct respQ *q = &adapter->sge->respQ;
+ u32 cause;
+ int handled = 0;
- /*
- * Clear the SGE_DATA interrupt first thing. Normally the NAPI
- * handler has control of the response queue and the interrupt handler
- * can look at the queue reliably only once it knows NAPI is off.
- * We can't wait that long to clear the SGE_DATA interrupt because we
- * could race with t1_poll rearming the SGE interrupt, so we need to
- * clear the interrupt speculatively and really early on.
- */
- writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+ cause = readl(adapter->regs + A_PL_CAUSE);
+ if (cause == 0 || cause == ~0)
+ return IRQ_NONE;
spin_lock(&adapter->async_lock);
- if (!napi_is_scheduled(sge->netdev)) {
+ if (cause & F_PL_INTR_SGE_DATA) {
+ struct respQ *q = &adapter->sge->respQ;
struct respQ_e *e = &q->entries[q->cidx];
- if (e->GenerationBit == q->genbit) {
- if (e->DataValid ||
- process_pure_responses(adapter, e)) {
- if (likely(__netif_rx_schedule_prep(sge->netdev)))
- __netif_rx_schedule(sge->netdev);
- else if (net_ratelimit())
- printk(KERN_INFO
- "NAPI schedule failure!\n");
- } else
- writel(q->cidx, adapter->regs + A_SG_SLEEPING);
-
- handled = 1;
- goto unlock;
- } else
- writel(q->cidx, adapter->regs + A_SG_SLEEPING);
- } else if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) {
- printk(KERN_ERR "data interrupt while NAPI running\n");
- }
-
- handled = t1_slow_intr_handler(adapter);
+ handled = 1;
+ writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+
+ if (e->GenerationBit == q->genbit &&
+ __netif_rx_schedule_prep(dev)) {
+ if (e->DataValid || process_pure_responses(adapter, e)) {
+ /* mask off data IRQ */
+ writel(adapter->slow_intr_mask,
+ adapter->regs + A_PL_ENABLE);
+ __netif_rx_schedule(sge->netdev);
+ goto unlock;
+ }
+ /* no data, no NAPI needed */
+ netif_poll_enable(dev);
+
+ }
+ writel(q->cidx, adapter->regs + A_SG_SLEEPING);
+ } else
+ handled = t1_slow_intr_handler(adapter);
+
if (!handled)
sge->stats.unhandled_irqs++;
- unlock:
+unlock:
spin_unlock(&adapter->async_lock);
return IRQ_RETVAL(handled != 0);
}
+#else
/*
* Main interrupt handler, optimized assuming that we took a 'DATA'
* interrupt.
@@ -1720,7 +1709,7 @@ static irqreturn_t t1_interrupt_napi(int irq, void *data)
* 5. If we took an interrupt, but no valid respQ descriptors was found we
* let the slow_intr_handler run and do error handling.
*/
-static irqreturn_t t1_interrupt(int irq, void *cookie)
+irqreturn_t t1_interrupt(int irq, void *cookie)
{
int work_done;
struct respQ_e *e;
@@ -1752,11 +1741,7 @@ static irqreturn_t t1_interrupt(int irq, void *cookie)
spin_unlock(&adapter->async_lock);
return IRQ_RETVAL(work_done != 0);
}
-
-irq_handler_t t1_select_intr_handler(adapter_t *adapter)
-{
- return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt;
-}
+#endif
/*
* Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it.
@@ -2033,7 +2018,6 @@ static void sge_tx_reclaim_cb(unsigned long data)
*/
int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p)
{
- sge->netdev->poll = t1_poll;
sge->fixed_intrtimer = p->rx_coalesce_usecs *
core_ticks_per_usec(sge->adapter);
writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER);
@@ -2234,7 +2218,6 @@ struct sge * __devinit t1_sge_create(struct adapter *adapter,
p->coalesce_enable = 0;
p->sample_interval_usecs = 0;
- p->polling = 0;
return sge;
nomem_port: