aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/dgrs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dgrs.c')
-rw-r--r--drivers/net/dgrs.c1617
1 files changed, 1617 insertions, 0 deletions
diff --git a/drivers/net/dgrs.c b/drivers/net/dgrs.c
new file mode 100644
index 00000000000..7809838e6c4
--- /dev/null
+++ b/drivers/net/dgrs.c
@@ -0,0 +1,1617 @@
+/*
+ * Digi RightSwitch SE-X loadable device driver for Linux
+ *
+ * The RightSwitch is a 4 (EISA) or 6 (PCI) port etherswitch and
+ * a NIC on an internal board.
+ *
+ * Author: Rick Richardson, rick@remotepoint.com
+ * Derived from the SVR4.2 (UnixWare) driver for the same card.
+ *
+ * Copyright 1995-1996 Digi International Inc.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ * For information on purchasing a RightSwitch SE-4 or SE-6
+ * board, please contact Digi's sales department at 1-612-912-3444
+ * or 1-800-DIGIBRD. Outside the U.S., please check our Web page
+ * at http://www.dgii.com for sales offices worldwide.
+ *
+ * OPERATION:
+ * When compiled as a loadable module, this driver can operate
+ * the board as either a 4/6 port switch with a 5th or 7th port
+ * that is a conventional NIC interface as far as the host is
+ * concerned, OR as 4/6 independent NICs. To select multi-NIC
+ * mode, add "nicmode=1" on the insmod load line for the driver.
+ *
+ * This driver uses the "dev" common ethernet device structure
+ * and a private "priv" (dev->priv) structure that contains
+ * mostly DGRS-specific information and statistics. To keep
+ * the code for both the switch mode and the multi-NIC mode
+ * as similar as possible, I have introduced the concept of
+ * "dev0"/"priv0" and "devN"/"privN" pointer pairs in subroutines
+ * where needed. The first pair of pointers points to the
+ * "dev" and "priv" structures of the zeroth (0th) device
+ * interface associated with a board. The second pair of
+ * pointers points to the current (Nth) device interface
+ * for the board: the one for which we are processing data.
+ *
+ * In switch mode, the pairs of pointers are always the same,
+ * that is, dev0 == devN and priv0 == privN. This is just
+ * like previous releases of this driver which did not support
+ * NIC mode.
+ *
+ * In multi-NIC mode, the pairs of pointers may be different.
+ * We use the devN and privN pointers to reference just the
+ * name, port number, and statistics for the current interface.
+ * We use the dev0 and priv0 pointers to access the variables
+ * that control access to the board, such as board address
+ * and simulated 82596 variables. This is because there is
+ * only one "fake" 82596 that serves as the interface to
+ * the board. We do not want to try to keep the variables
+ * associated with this 82596 in sync across all devices.
+ *
+ * This scheme works well. As you will see, except for
+ * initialization, there is very little difference between
+ * the two modes as far as this driver is concerned. On the
+ * receive side in NIC mode, the interrupt *always* comes in on
+ * the 0th interface (dev0/priv0). We then figure out which
+ * real 82596 port it came in on from looking at the "chan"
+ * member that the board firmware adds at the end of each
+ * RBD (a.k.a. TBD). We get the channel number like this:
+ * int chan = ((I596_RBD *) S2H(cbp->xmit.tbdp))->chan;
+ *
+ * On the transmit side in multi-NIC mode, we specify the
+ * output 82596 port by setting the new "dstchan" structure
+ * member that is at the end of the RFD, like this:
+ * priv0->rfdp->dstchan = privN->chan;
+ *
+ * TODO:
+ * - Multi-NIC mode is not yet supported when the driver is linked
+ * into the kernel.
+ * - Better handling of multicast addresses.
+ *
+ * Fixes:
+ * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001
+ * - fix dgrs_found_device wrt checking kmalloc return and
+ * rollbacking the partial steps of the whole process when
+ * one of the devices can't be allocated. Fix SET_MODULE_OWNER
+ * on the loop to use devN instead of repeated calls to dev.
+ *
+ * davej <davej@suse.de> - 9/2/2001
+ * - Enable PCI device before reading ioaddr/irq
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/eisa.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+static char version[] __initdata =
+ "$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $";
+
+/*
+ * DGRS include files
+ */
+typedef unsigned char uchar;
+typedef unsigned int bool;
+#define vol volatile
+
+#include "dgrs.h"
+#include "dgrs_es4h.h"
+#include "dgrs_plx9060.h"
+#include "dgrs_i82596.h"
+#include "dgrs_ether.h"
+#include "dgrs_asstruct.h"
+#include "dgrs_bcomm.h"
+
+#ifdef CONFIG_PCI
+static struct pci_device_id dgrs_pci_tbl[] = {
+ { SE6_PCI_VENDOR_ID, SE6_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, dgrs_pci_tbl);
+#endif
+
+#ifdef CONFIG_EISA
+static struct eisa_device_id dgrs_eisa_tbl[] = {
+ { "DBI0A01" },
+ { }
+};
+MODULE_DEVICE_TABLE(eisa, dgrs_eisa_tbl);
+#endif
+
+MODULE_LICENSE("GPL");
+
+
+/*
+ * Firmware. Compiled separately for local compilation,
+ * but #included for Linux distribution.
+ */
+#ifndef NOFW
+ #include "dgrs_firmware.c"
+#else
+ extern int dgrs_firmnum;
+ extern char dgrs_firmver[];
+ extern char dgrs_firmdate[];
+ extern uchar dgrs_code[];
+ extern int dgrs_ncode;
+#endif
+
+/*
+ * Linux out*() is backwards from all other operating systems
+ */
+#define OUTB(ADDR, VAL) outb(VAL, ADDR)
+#define OUTW(ADDR, VAL) outw(VAL, ADDR)
+#define OUTL(ADDR, VAL) outl(VAL, ADDR)
+
+/*
+ * Macros to convert switch to host and host to switch addresses
+ * (assumes a local variable priv points to board dependent struct)
+ */
+#define S2H(A) ( ((unsigned long)(A)&0x00ffffff) + priv0->vmem )
+#define S2HN(A) ( ((unsigned long)(A)&0x00ffffff) + privN->vmem )
+#define H2S(A) ( ((char *) (A) - priv0->vmem) + 0xA3000000 )
+
+/*
+ * Convert a switch address to a "safe" address for use with the
+ * PLX 9060 DMA registers and the associated HW kludge that allows
+ * for host access of the DMA registers.
+ */
+#define S2DMA(A) ( (unsigned long)(A) & 0x00ffffff)
+
+/*
+ * "Space.c" variables, now settable from module interface
+ * Use the name below, minus the "dgrs_" prefix. See init_module().
+ */
+static int dgrs_debug = 1;
+static int dgrs_dma = 1;
+static int dgrs_spantree = -1;
+static int dgrs_hashexpire = -1;
+static uchar dgrs_ipaddr[4] = { 0xff, 0xff, 0xff, 0xff};
+static uchar dgrs_iptrap[4] = { 0xff, 0xff, 0xff, 0xff};
+static __u32 dgrs_ipxnet = -1;
+static int dgrs_nicmode;
+
+/*
+ * Private per-board data structure (dev->priv)
+ */
+typedef struct
+{
+ /*
+ * Stuff for generic ethercard I/F
+ */
+ struct net_device_stats stats;
+
+ /*
+ * DGRS specific data
+ */
+ char *vmem;
+
+ struct bios_comm *bcomm; /* Firmware BIOS comm structure */
+ PORT *port; /* Ptr to PORT[0] struct in VM */
+ I596_SCB *scbp; /* Ptr to SCB struct in VM */
+ I596_RFD *rfdp; /* Current RFD list */
+ I596_RBD *rbdp; /* Current RBD list */
+
+ volatile int intrcnt; /* Count of interrupts */
+
+ /*
+ * SE-4 (EISA) board variables
+ */
+ uchar is_reg; /* EISA: Value for ES4H_IS reg */
+
+ /*
+ * SE-6 (PCI) board variables
+ *
+ * The PLX "expansion rom" space is used for DMA register
+ * access from the host on the SE-6. These are the physical
+ * and virtual addresses of that space.
+ */
+ ulong plxreg; /* Phys address of PLX chip */
+ char *vplxreg; /* Virtual address of PLX chip */
+ ulong plxdma; /* Phys addr of PLX "expansion rom" */
+ ulong volatile *vplxdma; /* Virtual addr of "expansion rom" */
+ int use_dma; /* Flag: use DMA */
+ DMACHAIN *dmadesc_s; /* area for DMA chains (SW addr.) */
+ DMACHAIN *dmadesc_h; /* area for DMA chains (Host Virtual) */
+
+ /*
+ * Multi-NIC mode variables
+ *
+ * All entries of the devtbl[] array are valid for the 0th
+ * device (i.e. eth0, but not eth1...eth5). devtbl[0] is
+ * valid for all devices (i.e. eth0, eth1, ..., eth5).
+ */
+ int nports; /* Number of physical ports (4 or 6) */
+ int chan; /* Channel # (1-6) for this device */
+ struct net_device *devtbl[6]; /* Ptrs to N device structs */
+
+} DGRS_PRIV;
+
+
+/*
+ * reset or un-reset the IDT processor
+ */
+static void
+proc_reset(struct net_device *dev0, int reset)
+{
+ DGRS_PRIV *priv0 = (DGRS_PRIV *) dev0->priv;
+
+ if (priv0->plxreg)
+ {
+ ulong val;
+ val = inl(dev0->base_addr + PLX_MISC_CSR);
+ if (reset)
+ val |= SE6_RESET;
+ else
+ val &= ~SE6_RESET;
+ OUTL(dev0->base_addr + PLX_MISC_CSR, val);
+ }
+ else
+ {
+ OUTB(dev0->base_addr + ES4H_PC, reset ? ES4H_PC_RESET : 0);
+ }
+}
+
+/*
+ * See if the board supports bus master DMA
+ */
+static int
+check_board_dma(struct net_device *dev0)
+{
+ DGRS_PRIV *priv0 = (DGRS_PRIV *) dev0->priv;
+ ulong x;
+
+ /*
+ * If Space.c says not to use DMA, or if it's not a PLX based
+ * PCI board, or if the expansion ROM space is not PCI
+ * configured, then return false.
+ */
+ if (!dgrs_dma || !priv0->plxreg || !priv0->plxdma)
+ return (0);
+
+ /*
+ * Set the local address remap register of the "expansion rom"
+ * area to 0x80000000 so that we can use it to access the DMA
+ * registers from the host side.
+ */
+ OUTL(dev0->base_addr + PLX_ROM_BASE_ADDR, 0x80000000);
+
+ /*
+ * Set the PCI region descriptor to:
+ * Space 0:
+ * disable read-prefetch
+ * enable READY
+ * enable BURST
+ * 0 internal wait states
+ * Expansion ROM: (used for host DMA register access)
+ * disable read-prefetch
+ * enable READY
+ * disable BURST
+ * 0 internal wait states
+ */
+ OUTL(dev0->base_addr + PLX_BUS_REGION, 0x49430343);
+
+ /*
+ * Now map the DMA registers into our virtual space
+ */
+ priv0->vplxdma = (ulong *) ioremap (priv0->plxdma, 256);
+ if (!priv0->vplxdma)
+ {
+ printk("%s: can't *remap() the DMA regs\n", dev0->name);
+ return (0);
+ }
+
+ /*
+ * Now test to see if we can access the DMA registers
+ * If we write -1 and get back 1FFF, then we accessed the
+ * DMA register. Otherwise, we probably have an old board
+ * and wrote into regular RAM.
+ */
+ priv0->vplxdma[PLX_DMA0_MODE/4] = 0xFFFFFFFF;
+ x = priv0->vplxdma[PLX_DMA0_MODE/4];
+ if (x != 0x00001FFF) {
+ iounmap((void *)priv0->vplxdma);
+ return (0);
+ }
+
+ return (1);
+}
+
+/*
+ * Initiate DMA using PLX part on PCI board. Spin the
+ * processor until completed. All addresses are physical!
+ *
+ * If pciaddr is NULL, then it's a chaining DMA, and lcladdr is
+ * the address of the first DMA descriptor in the chain.
+ *
+ * If pciaddr is not NULL, then it's a single DMA.
+ *
+ * In either case, "lcladdr" must have been fixed up to make
+ * sure the MSB isn't set using the S2DMA macro before passing
+ * the address to this routine.
+ */
+static int
+do_plx_dma(
+ struct net_device *dev,
+ ulong pciaddr,
+ ulong lcladdr,
+ int len,
+ int to_host
+)
+{
+ int i;
+ ulong csr = 0;
+ DGRS_PRIV *priv = (DGRS_PRIV *) dev->priv;
+
+ if (pciaddr)
+ {
+ /*
+ * Do a single, non-chain DMA
+ */
+ priv->vplxdma[PLX_DMA0_PCI_ADDR/4] = pciaddr;
+ priv->vplxdma[PLX_DMA0_LCL_ADDR/4] = lcladdr;
+ priv->vplxdma[PLX_DMA0_SIZE/4] = len;
+ priv->vplxdma[PLX_DMA0_DESCRIPTOR/4] = to_host
+ ? PLX_DMA_DESC_TO_HOST
+ : PLX_DMA_DESC_TO_BOARD;
+ priv->vplxdma[PLX_DMA0_MODE/4] =
+ PLX_DMA_MODE_WIDTH32
+ | PLX_DMA_MODE_WAITSTATES(0)
+ | PLX_DMA_MODE_READY
+ | PLX_DMA_MODE_NOBTERM
+ | PLX_DMA_MODE_BURST
+ | PLX_DMA_MODE_NOCHAIN;
+ }
+ else
+ {
+ /*
+ * Do a chaining DMA
+ */
+ priv->vplxdma[PLX_DMA0_MODE/4] =
+ PLX_DMA_MODE_WIDTH32
+ | PLX_DMA_MODE_WAITSTATES(0)
+ | PLX_DMA_MODE_READY
+ | PLX_DMA_MODE_NOBTERM
+ | PLX_DMA_MODE_BURST
+ | PLX_DMA_MODE_CHAIN;
+ priv->vplxdma[PLX_DMA0_DESCRIPTOR/4] = lcladdr;
+ }
+
+ priv->vplxdma[PLX_DMA_CSR/4] =
+ PLX_DMA_CSR_0_ENABLE | PLX_DMA_CSR_0_START;
+
+ /*
+ * Wait for DMA to complete
+ */
+ for (i = 0; i < 1000000; ++i)
+ {
+ /*
+ * Spin the host CPU for 1 usec, so we don't thrash
+ * the PCI bus while the PLX 9060 is doing DMA.
+ */
+ udelay(1);
+
+ csr = (volatile unsigned long) priv->vplxdma[PLX_DMA_CSR/4];
+
+ if (csr & PLX_DMA_CSR_0_DONE)
+ break;
+ }
+
+ if ( ! (csr & PLX_DMA_CSR_0_DONE) )
+ {
+ printk("%s: DMA done never occurred. DMA disabled.\n",
+ dev->name);
+ priv->use_dma = 0;
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * dgrs_rcv_frame()
+ *
+ * Process a received frame. This is called from the interrupt
+ * routine, and works for both switch mode and multi-NIC mode.
+ *
+ * Note that when in multi-NIC mode, we want to always access the
+ * hardware using the dev and priv structures of the first port,
+ * so that we are using only one set of variables to maintain
+ * the board interface status, but we want to use the Nth port
+ * dev and priv structures to maintain statistics and to pass
+ * the packet up.
+ *
+ * Only the first device structure is attached to the interrupt.
+ * We use the special "chan" variable at the end of the first RBD
+ * to select the Nth device in multi-NIC mode.
+ *
+ * We currently do chained DMA on a per-packet basis when the
+ * packet is "long", and we spin the CPU a short time polling
+ * for DMA completion. This avoids a second interrupt overhead,
+ * and gives the best performance for light traffic to the host.
+ *
+ * However, a better scheme that could be implemented would be
+ * to see how many packets are outstanding for the host, and if
+ * the number is "large", create a long chain to DMA several
+ * packets into the host in one go. In this case, we would set
+ * up some state variables to let the host CPU continue doing
+ * other things until a DMA completion interrupt comes along.
+ */
+static void
+dgrs_rcv_frame(
+ struct net_device *dev0,
+ DGRS_PRIV *priv0,
+ I596_CB *cbp
+)
+{
+ int len;
+ I596_TBD *tbdp;
+ struct sk_buff *skb;
+ uchar *putp;
+ uchar *p;
+ struct net_device *devN;
+ DGRS_PRIV *privN;
+
+ /*
+ * Determine Nth priv and dev structure pointers
+ */
+ if (dgrs_nicmode)
+ { /* Multi-NIC mode */
+ int chan = ((I596_RBD *) S2H(cbp->xmit.tbdp))->chan;
+
+ devN = priv0->devtbl[chan-1];
+ /*
+ * If devN is null, we got an interrupt before the I/F
+ * has been initialized. Pitch the packet.
+ */
+ if (devN == NULL)
+ goto out;
+ privN = (DGRS_PRIV *) devN->priv;
+ }
+ else
+ { /* Switch mode */
+ devN = dev0;
+ privN = priv0;
+ }
+
+ if (0) printk("%s: rcv len=%ld\n", devN->name, cbp->xmit.count);
+
+ /*
+ * Allocate a message block big enough to hold the whole frame
+ */
+ len = cbp->xmit.count;
+ if ((skb = dev_alloc_skb(len+5)) == NULL)
+ {
+ printk("%s: dev_alloc_skb failed for rcv buffer\n", devN->name);
+ ++privN->stats.rx_dropped;
+ /* discarding the frame */
+ goto out;
+ }
+ skb->dev = devN;
+ skb_reserve(skb, 2); /* Align IP header */
+
+again:
+ putp = p = skb_put(skb, len);
+
+ /*
+ * There are three modes here for doing the packet copy.
+ * If we have DMA, and the packet is "long", we use the
+ * chaining mode of DMA. If it's shorter, we use single
+ * DMA's. Otherwise, we use memcpy().
+ */
+ if (priv0->use_dma && priv0->dmadesc_h && len > 64)
+ {
+ /*
+ * If we can use DMA and it's a long frame, copy it using
+ * DMA chaining.
+ */
+ DMACHAIN *ddp_h; /* Host virtual DMA desc. pointer */
+ DMACHAIN *ddp_s; /* Switch physical DMA desc. pointer */
+ uchar *phys_p;
+
+ /*
+ * Get the physical address of the STREAMS buffer.
+ * NOTE: allocb() guarantees that the whole buffer
+ * is in a single page if the length < 4096.
+ */
+ phys_p = (uchar *) virt_to_phys(putp);
+
+ ddp_h = priv0->dmadesc_h;
+ ddp_s = priv0->dmadesc_s;
+ tbdp = (I596_TBD *) S2H(cbp->xmit.tbdp);
+ for (;;)
+ {
+ int count;
+ int amt;
+
+ count = tbdp->count;
+ amt = count & 0x3fff;
+ if (amt == 0)
+ break; /* For safety */
+ if ( (p-putp) >= len)
+ {
+ printk("%s: cbp = %lx\n", devN->name, (long) H2S(cbp));
+ proc_reset(dev0, 1); /* Freeze IDT */
+ break; /* For Safety */
+ }
+
+ ddp_h->pciaddr = (ulong) phys_p;
+ ddp_h->lcladdr = S2DMA(tbdp->buf);
+ ddp_h->len = amt;
+
+ phys_p += amt;
+ p += amt;
+
+ if (count & I596_TBD_EOF)
+ {
+ ddp_h->next = PLX_DMA_DESC_TO_HOST
+ | PLX_DMA_DESC_EOC;
+ ++ddp_h;
+ break;
+ }
+ else
+ {
+ ++ddp_s;
+ ddp_h->next = PLX_DMA_DESC_TO_HOST
+ | (ulong) ddp_s;
+ tbdp = (I596_TBD *) S2H(tbdp->next);
+ ++ddp_h;
+ }
+ }
+ if (ddp_h - priv0->dmadesc_h)
+ {
+ int rc;
+
+ rc = do_plx_dma(dev0,
+ 0, (ulong) priv0->dmadesc_s, len, 0);
+ if (rc)
+ {
+ printk("%s: Chained DMA failure\n", devN->name);
+ goto again;
+ }
+ }
+ }
+ else if (priv0->use_dma)
+ {
+ /*
+ * If we can use DMA and it's a shorter frame, copy it
+ * using single DMA transfers.
+ */
+ uchar *phys_p;
+
+ /*
+ * Get the physical address of the STREAMS buffer.
+ * NOTE: allocb() guarantees that the whole buffer
+ * is in a single page if the length < 4096.
+ */
+ phys_p = (uchar *) virt_to_phys(putp);
+
+ tbdp = (I596_TBD *) S2H(cbp->xmit.tbdp);
+ for (;;)
+ {
+ int count;
+ int amt;
+ int rc;
+
+ count = tbdp->count;
+ amt = count & 0x3fff;
+ if (amt == 0)
+ break; /* For safety */
+ if ( (p-putp) >= len)
+ {
+ printk("%s: cbp = %lx\n", devN->name, (long) H2S(cbp));
+ proc_reset(dev0, 1); /* Freeze IDT */
+ break; /* For Safety */
+ }
+ rc = do_plx_dma(dev0, (ulong) phys_p,
+ S2DMA(tbdp->buf), amt, 1);
+ if (rc)
+ {
+ memcpy(p, S2H(tbdp->buf), amt);
+ printk("%s: Single DMA failed\n", devN->name);
+ }
+ phys_p += amt;
+ p += amt;
+ if (count & I596_TBD_EOF)
+ break;
+ tbdp = (I596_TBD *) S2H(tbdp->next);
+ }
+ }
+ else
+ {
+ /*
+ * Otherwise, copy it piece by piece using memcpy()
+ */
+ tbdp = (I596_TBD *) S2H(cbp->xmit.tbdp);
+ for (;;)
+ {
+ int count;
+ int amt;
+
+ count = tbdp->count;
+ amt = count & 0x3fff;
+ if (amt == 0)
+ break; /* For safety */
+ if ( (p-putp) >= len)
+ {
+ printk("%s: cbp = %lx\n", devN->name, (long) H2S(cbp));
+ proc_reset(dev0, 1); /* Freeze IDT */
+ break; /* For Safety */
+ }
+ memcpy(p, S2H(tbdp->buf), amt);
+ p += amt;
+ if (count & I596_TBD_EOF)
+ break;
+ tbdp = (I596_TBD *) S2H(tbdp->next);
+ }
+ }
+
+ /*
+ * Pass the frame to upper half
+ */
+ skb->protocol = eth_type_trans(skb, devN);
+ netif_rx(skb);
+ devN->last_rx = jiffies;
+ ++privN->stats.rx_packets;
+ privN->stats.rx_bytes += len;
+
+out:
+ cbp->xmit.status = I596_CB_STATUS_C | I596_CB_STATUS_OK;
+}
+
+/*
+ * Start transmission of a frame
+ *
+ * The interface to the board is simple: we pretend that we are
+ * a fifth 82596 ethernet controller 'receiving' data, and copy the
+ * data into the same structures that a real 82596 would. This way,
+ * the board firmware handles the host 'port' the same as any other.
+ *
+ * NOTE: we do not use Bus master DMA for this routine. Turns out
+ * that it is not needed. Slave writes over the PCI bus are about
+ * as fast as DMA, due to the fact that the PLX part can do burst
+ * writes. The same is not true for data being read from the board.
+ *
+ * For multi-NIC mode, we tell the firmware the desired 82596
+ * output port by setting the special "dstchan" member at the
+ * end of the traditional 82596 RFD structure.
+ */
+
+static int dgrs_start_xmit(struct sk_buff *skb, struct net_device *devN)
+{
+ DGRS_PRIV *privN = (DGRS_PRIV *) devN->priv;
+ struct net_device *dev0;
+ DGRS_PRIV *priv0;
+ I596_RBD *rbdp;
+ int count;
+ int i, len, amt;
+
+ /*
+ * Determine 0th priv and dev structure pointers
+ */
+ if (dgrs_nicmode)
+ {
+ dev0 = privN->devtbl[0];
+ priv0 = (DGRS_PRIV *) dev0->priv;
+ }
+ else
+ {
+ dev0 = devN;
+ priv0 = privN;
+ }
+
+ if (dgrs_debug > 1)
+ printk("%s: xmit len=%d\n", devN->name, (int) skb->len);
+
+ devN->trans_start = jiffies;
+ netif_start_queue(devN);
+
+ if (priv0->rfdp->cmd & I596_RFD_EL)
+ { /* Out of RFD's */
+ if (0) printk("%s: NO RFD's\n", devN->name);
+ goto no_resources;
+ }
+
+ rbdp = priv0->rbdp;
+ count = 0;
+ priv0->rfdp->rbdp = (I596_RBD *) H2S(rbdp);
+
+ i = 0; len = skb->len;
+ for (;;)
+ {
+ if (rbdp->size & I596_RBD_EL)
+ { /* Out of RBD's */
+ if (0) printk("%s: NO RBD's\n", devN->name);
+ goto no_resources;
+ }
+
+ amt = min_t(unsigned int, len, rbdp->size - count);
+ memcpy( (char *) S2H(rbdp->buf) + count, skb->data + i, amt);
+ i += amt;
+ count += amt;
+ len -= amt;
+ if (len == 0)
+ {
+ if (skb->len < 60)
+ rbdp->count = 60 | I596_RBD_EOF;
+ else
+ rbdp->count = count | I596_RBD_EOF;
+ rbdp = (I596_RBD *) S2H(rbdp->next);
+ goto frame_done;
+ }
+ else if (count < 32)
+ {
+ /* More data to come, but we used less than 32
+ * bytes of this RBD. Keep filling this RBD.
+ */
+ {} /* Yes, we do nothing here */
+ }
+ else
+ {
+ rbdp->count = count;
+ rbdp = (I596_RBD *) S2H(rbdp->next);
+ count = 0;
+ }
+ }
+
+frame_done:
+ priv0->rbdp = rbdp;
+ if (dgrs_nicmode)
+ priv0->rfdp->dstchan = privN->chan;
+ priv0->rfdp->status = I596_RFD_C | I596_RFD_OK;
+ priv0->rfdp = (I596_RFD *) S2H(priv0->rfdp->next);
+
+ ++privN->stats.tx_packets;
+
+ dev_kfree_skb (skb);
+ return (0);
+
+no_resources:
+ priv0->scbp->status |= I596_SCB_RNR; /* simulate I82596 */
+ return (-EAGAIN);
+}
+
+/*
+ * Open the interface
+ */
+static int
+dgrs_open( struct net_device *dev )
+{
+ netif_start_queue(dev);
+ return (0);
+}
+
+/*
+ * Close the interface
+ */
+static int dgrs_close( struct net_device *dev )
+{
+ netif_stop_queue(dev);
+ return (0);
+}
+
+/*
+ * Get statistics
+ */
+static struct net_device_stats *dgrs_get_stats( struct net_device *dev )
+{
+ DGRS_PRIV *priv = (DGRS_PRIV *) dev->priv;
+
+ return (&priv->stats);
+}
+
+/*
+ * Set multicast list and/or promiscuous mode
+ */
+
+static void dgrs_set_multicast_list( struct net_device *dev)
+{
+ DGRS_PRIV *priv = (DGRS_PRIV *) dev->priv;
+
+ priv->port->is_promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
+}
+
+/*
+ * Unique ioctl's
+ */
+static int dgrs_ioctl(struct net_device *devN, struct ifreq *ifr, int cmd)
+{
+ DGRS_PRIV *privN = (DGRS_PRIV *) devN->priv;
+ DGRS_IOCTL ioc;
+ int i;
+
+ if (cmd != DGRSIOCTL)
+ return -EINVAL;
+
+ if(copy_from_user(&ioc, ifr->ifr_data, sizeof(DGRS_IOCTL)))
+ return -EFAULT;
+
+ switch (ioc.cmd)
+ {
+ case DGRS_GETMEM:
+ if (ioc.len != sizeof(ulong))
+ return -EINVAL;
+ if(copy_to_user(ioc.data, &devN->mem_start, ioc.len))
+ return -EFAULT;
+ return (0);
+ case DGRS_SETFILTER:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (ioc.port > privN->bcomm->bc_nports)
+ return -EINVAL;
+ if (ioc.filter >= NFILTERS)
+ return -EINVAL;
+ if (ioc.len > privN->bcomm->bc_filter_area_len)
+ return -EINVAL;
+
+ /* Wait for old command to finish */
+ for (i = 0; i < 1000; ++i)
+ {
+ if ( (volatile long) privN->bcomm->bc_filter_cmd <= 0 )
+ break;
+ udelay(1);
+ }
+ if (i >= 1000)
+ return -EIO;
+
+ privN->bcomm->bc_filter_port = ioc.port;
+ privN->bcomm->bc_filter_num = ioc.filter;
+ privN->bcomm->bc_filter_len = ioc.len;
+
+ if (ioc.len)
+ {
+ if(copy_from_user(S2HN(privN->bcomm->bc_filter_area),
+ ioc.data, ioc.len))
+ return -EFAULT;
+ privN->bcomm->bc_filter_cmd = BC_FILTER_SET;
+ }
+ else
+ privN->bcomm->bc_filter_cmd = BC_FILTER_CLR;
+ return(0);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/*
+ * Process interrupts
+ *
+ * dev, priv will always refer to the 0th device in Multi-NIC mode.
+ */
+
+static irqreturn_t dgrs_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev0 = (struct net_device *) dev_id;
+ DGRS_PRIV *priv0 = (DGRS_PRIV *) dev0->priv;
+ I596_CB *cbp;
+ int cmd;
+ int i;
+
+ ++priv0->intrcnt;
+ if (1) ++priv0->bcomm->bc_cnt[4];
+ if (0)
+ {
+ static int cnt = 100;
+ if (--cnt > 0)
+ printk("%s: interrupt: irq %d\n", dev0->name, irq);
+ }
+
+ /*
+ * Get 596 command
+ */
+ cmd = priv0->scbp->cmd;
+
+ /*
+ * See if RU has been restarted
+ */
+ if ( (cmd & I596_SCB_RUC) == I596_SCB_RUC_START)
+ {
+ if (0) printk("%s: RUC start\n", dev0->name);
+ priv0->rfdp = (I596_RFD *) S2H(priv0->scbp->rfdp);
+ priv0->rbdp = (I596_RBD *) S2H(priv0->rfdp->rbdp);
+ priv0->scbp->status &= ~(I596_SCB_RNR|I596_SCB_RUS);
+ /*
+ * Tell upper half (halves)
+ */
+ if (dgrs_nicmode)
+ {
+ for (i = 0; i < priv0->nports; ++i)
+ netif_wake_queue (priv0->devtbl[i]);
+ }
+ else
+ netif_wake_queue (dev0);
+ /* if (bd->flags & TX_QUEUED)
+ DL_sched(bd, bdd); */
+ }
+
+ /*
+ * See if any CU commands to process
+ */
+ if ( (cmd & I596_SCB_CUC) != I596_SCB_CUC_START)
+ {
+ priv0->scbp->cmd = 0; /* Ignore all other commands */
+ goto ack_intr;
+ }
+ priv0->scbp->status &= ~(I596_SCB_CNA|I596_SCB_CUS);
+
+ /*
+ * Process a command
+ */
+ cbp = (I596_CB *) S2H(priv0->scbp->cbp);
+ priv0->scbp->cmd = 0; /* Safe to clear the command */
+ for (;;)
+ {
+ switch (cbp->nop.cmd & I596_CB_CMD)
+ {
+ case I596_CB_CMD_XMIT:
+ dgrs_rcv_frame(dev0, priv0, cbp);
+ break;
+ default:
+ cbp->nop.status = I596_CB_STATUS_C | I596_CB_STATUS_OK;
+ break;
+ }
+ if (cbp->nop.cmd & I596_CB_CMD_EL)
+ break;
+ cbp = (I596_CB *) S2H(cbp->nop.next);
+ }
+ priv0->scbp->status |= I596_SCB_CNA;
+
+ /*
+ * Ack the interrupt
+ */
+ack_intr:
+ if (priv0->plxreg)
+ OUTL(dev0->base_addr + PLX_LCL2PCI_DOORBELL, 1);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Download the board firmware
+ */
+static int __init
+dgrs_download(struct net_device *dev0)
+{
+ DGRS_PRIV *priv0 = (DGRS_PRIV *) dev0->priv;
+ int is;
+ unsigned long i;
+
+ static int iv2is[16] = {
+ 0, 0, 0, ES4H_IS_INT3,
+ 0, ES4H_IS_INT5, 0, ES4H_IS_INT7,
+ 0, 0, ES4H_IS_INT10, ES4H_IS_INT11,
+ ES4H_IS_INT12, 0, 0, ES4H_IS_INT15 };
+
+ /*
+ * Map in the dual port memory
+ */
+ priv0->vmem = ioremap(dev0->mem_start, 2048*1024);
+ if (!priv0->vmem)
+ {
+ printk("%s: cannot map in board memory\n", dev0->name);
+ return -ENXIO;
+ }
+
+ /*
+ * Hold the processor and configure the board addresses
+ */
+ if (priv0->plxreg)
+ { /* PCI bus */
+ proc_reset(dev0, 1);
+ }
+ else
+ { /* EISA bus */
+ is = iv2is[dev0->irq & 0x0f];
+ if (!is)
+ {
+ printk("%s: Illegal IRQ %d\n", dev0->name, dev0->irq);
+ iounmap(priv0->vmem);
+ priv0->vmem = NULL;
+ return -ENXIO;
+ }
+ OUTB(dev0->base_addr + ES4H_AS_31_24,
+ (uchar) (dev0->mem_start >> 24) );
+ OUTB(dev0->base_addr + ES4H_AS_23_16,
+ (uchar) (dev0->mem_start >> 16) );
+ priv0->is_reg = ES4H_IS_LINEAR | is |
+ ((uchar) (dev0->mem_start >> 8) & ES4H_IS_AS15);
+ OUTB(dev0->base_addr + ES4H_IS, priv0->is_reg);
+ OUTB(dev0->base_addr + ES4H_EC, ES4H_EC_ENABLE);
+ OUTB(dev0->base_addr + ES4H_PC, ES4H_PC_RESET);
+ OUTB(dev0->base_addr + ES4H_MW, ES4H_MW_ENABLE | 0x00);
+ }
+
+ /*
+ * See if we can do DMA on the SE-6
+ */
+ priv0->use_dma = check_board_dma(dev0);
+ if (priv0->use_dma)
+ printk("%s: Bus Master DMA is enabled.\n", dev0->name);
+
+ /*
+ * Load and verify the code at the desired address
+ */
+ memcpy(priv0->vmem, dgrs_code, dgrs_ncode); /* Load code */
+ if (memcmp(priv0->vmem, dgrs_code, dgrs_ncode))
+ {
+ iounmap(priv0->vmem);
+ priv0->vmem = NULL;
+ printk("%s: download compare failed\n", dev0->name);
+ return -ENXIO;
+ }
+
+ /*
+ * Configurables
+ */
+ priv0->bcomm = (struct bios_comm *) (priv0->vmem + 0x0100);
+ priv0->bcomm->bc_nowait = 1; /* Tell board to make printf not wait */
+ priv0->bcomm->bc_squelch = 0; /* Flag from Space.c */
+ priv0->bcomm->bc_150ohm = 0; /* Flag from Space.c */
+
+ priv0->bcomm->bc_spew = 0; /* Debug flag from Space.c */
+ priv0->bcomm->bc_maxrfd = 0; /* Debug flag from Space.c */
+ priv0->bcomm->bc_maxrbd = 0; /* Debug flag from Space.c */
+
+ /*
+ * Tell board we are operating in switch mode (1) or in
+ * multi-NIC mode (2).
+ */
+ priv0->bcomm->bc_host = dgrs_nicmode ? BC_MULTINIC : BC_SWITCH;
+
+ /*
+ * Request memory space on board for DMA chains
+ */
+ if (priv0->use_dma)
+ priv0->bcomm->bc_hostarea_len = (2048/64) * 16;
+
+ /*
+ * NVRAM configurables from Space.c
+ */
+ priv0->bcomm->bc_spantree = dgrs_spantree;
+ priv0->bcomm->bc_hashexpire = dgrs_hashexpire;
+ memcpy(priv0->bcomm->bc_ipaddr, dgrs_ipaddr, 4);
+ memcpy(priv0->bcomm->bc_iptrap, dgrs_iptrap, 4);
+ memcpy(priv0->bcomm->bc_ipxnet, &dgrs_ipxnet, 4);
+
+ /*
+ * Release processor, wait 8 seconds for board to initialize
+ */
+ proc_reset(dev0, 0);
+
+ for (i = jiffies + 8 * HZ; time_after(i, jiffies); )
+ {
+ barrier(); /* Gcc 2.95 needs this */
+ if (priv0->bcomm->bc_status >= BC_RUN)
+ break;
+ }
+
+ if (priv0->bcomm->bc_status < BC_RUN)
+ {
+ printk("%s: board not operating\n", dev0->name);
+ iounmap(priv0->vmem);
+ priv0->vmem = NULL;
+ return -ENXIO;
+ }
+
+ priv0->port = (PORT *) S2H(priv0->bcomm->bc_port);
+ priv0->scbp = (I596_SCB *) S2H(priv0->port->scbp);
+ priv0->rfdp = (I596_RFD *) S2H(priv0->scbp->rfdp);
+ priv0->rbdp = (I596_RBD *) S2H(priv0->rfdp->rbdp);
+
+ priv0->scbp->status = I596_SCB_CNA; /* CU is idle */
+
+ /*
+ * Get switch physical and host virtual pointers to DMA
+ * chaining area. NOTE: the MSB of the switch physical
+ * address *must* be turned off. Otherwise, the HW kludge
+ * that allows host access of the PLX DMA registers will
+ * erroneously select the PLX registers.
+ */
+ priv0->dmadesc_s = (DMACHAIN *) S2DMA(priv0->bcomm->bc_hostarea);
+ if (priv0->dmadesc_s)
+ priv0->dmadesc_h = (DMACHAIN *) S2H(priv0->dmadesc_s);
+ else
+ priv0->dmadesc_h = NULL;
+
+ /*
+ * Enable board interrupts
+ */
+ if (priv0->plxreg)
+ { /* PCI bus */
+ OUTL(dev0->base_addr + PLX_INT_CSR,
+ inl(dev0->base_addr + PLX_INT_CSR)
+ | PLX_PCI_DOORBELL_IE); /* Enable intr to host */
+ OUTL(dev0->base_addr + PLX_LCL2PCI_DOORBELL, 1);
+ }
+ else
+ { /* EISA bus */
+ }
+
+ return (0);
+}
+
+/*
+ * Probe (init) a board
+ */
+static int __init
+dgrs_probe1(struct net_device *dev)
+{
+ DGRS_PRIV *priv = (DGRS_PRIV *) dev->priv;
+ unsigned long i;
+ int rc;
+
+ printk("%s: Digi RightSwitch io=%lx mem=%lx irq=%d plx=%lx dma=%lx\n",
+ dev->name, dev->base_addr, dev->mem_start, dev->irq,
+ priv->plxreg, priv->plxdma);
+
+ /*
+ * Download the firmware and light the processor
+ */
+ rc = dgrs_download(dev);
+ if (rc)
+ goto err_out;
+
+ /*
+ * Get ether address of board
+ */
+ printk("%s: Ethernet address", dev->name);
+ memcpy(dev->dev_addr, priv->port->ethaddr, 6);
+ for (i = 0; i < 6; ++i)
+ printk("%c%2.2x", i ? ':' : ' ', dev->dev_addr[i]);
+ printk("\n");
+
+ if (dev->dev_addr[0] & 1)
+ {
+ printk("%s: Illegal Ethernet Address\n", dev->name);
+ rc = -ENXIO;
+ goto err_out;
+ }
+
+ /*
+ * ACK outstanding interrupts, hook the interrupt,
+ * and verify that we are getting interrupts from the board.
+ */
+ if (priv->plxreg)
+ OUTL(dev->base_addr + PLX_LCL2PCI_DOORBELL, 1);
+
+ rc = request_irq(dev->irq, &dgrs_intr, SA_SHIRQ, "RightSwitch", dev);
+ if (rc)
+ goto err_out;
+
+ priv->intrcnt = 0;
+ for (i = jiffies + 2*HZ + HZ/2; time_after(i, jiffies); )
+ {
+ cpu_relax();
+ if (priv->intrcnt >= 2)
+ break;
+ }
+ if (priv->intrcnt < 2)
+ {
+ printk(KERN_ERR "%s: Not interrupting on IRQ %d (%d)\n",
+ dev->name, dev->irq, priv->intrcnt);
+ rc = -ENXIO;
+ goto err_free_irq;
+ }
+
+ /*
+ * Entry points...
+ */
+ dev->open = &dgrs_open;
+ dev->stop = &dgrs_close;
+ dev->get_stats = &dgrs_get_stats;
+ dev->hard_start_xmit = &dgrs_start_xmit;
+ dev->set_multicast_list = &dgrs_set_multicast_list;
+ dev->do_ioctl = &dgrs_ioctl;
+
+ return rc;
+
+err_free_irq:
+ free_irq(dev->irq, dev);
+err_out:
+ return rc;
+}
+
+static int __init
+dgrs_initclone(struct net_device *dev)
+{
+ DGRS_PRIV *priv = (DGRS_PRIV *) dev->priv;
+ int i;
+
+ printk("%s: Digi RightSwitch port %d ",
+ dev->name, priv->chan);
+ for (i = 0; i < 6; ++i)
+ printk("%c%2.2x", i ? ':' : ' ', dev->dev_addr[i]);
+ printk("\n");
+
+ return (0);
+}
+
+static struct net_device * __init
+dgrs_found_device(
+ int io,
+ ulong mem,
+ int irq,
+ ulong plxreg,
+ ulong plxdma,
+ struct device *pdev
+)
+{
+ DGRS_PRIV *priv;
+ struct net_device *dev;
+ int i, ret = -ENOMEM;
+
+ dev = alloc_etherdev(sizeof(DGRS_PRIV));
+ if (!dev)
+ goto err0;
+
+ priv = (DGRS_PRIV *)dev->priv;
+
+ dev->base_addr = io;
+ dev->mem_start = mem;
+ dev->mem_end = mem + 2048 * 1024 - 1;
+ dev->irq = irq;
+ priv->plxreg = plxreg;
+ priv->plxdma = plxdma;
+ priv->vplxdma = NULL;
+
+ priv->chan = 1;
+ priv->devtbl[0] = dev;
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, pdev);
+
+ ret = dgrs_probe1(dev);
+ if (ret)
+ goto err1;
+
+ ret = register_netdev(dev);
+ if (ret)
+ goto err2;
+
+ if ( !dgrs_nicmode )
+ return dev; /* Switch mode, we are done */
+
+ /*
+ * Operating card as N separate NICs
+ */
+
+ priv->nports = priv->bcomm->bc_nports;
+
+ for (i = 1; i < priv->nports; ++i)
+ {
+ struct net_device *devN;
+ DGRS_PRIV *privN;
+ /* Allocate new dev and priv structures */
+ devN = alloc_etherdev(sizeof(DGRS_PRIV));
+ ret = -ENOMEM;
+ if (!devN)
+ goto fail;
+
+ /* Don't copy the network device structure! */
+
+ /* copy the priv structure of dev[0] */
+ privN = (DGRS_PRIV *)devN->priv;
+ *privN = *priv;
+
+ /* ... and zero out VM areas */
+ privN->vmem = NULL;
+ privN->vplxdma = NULL;
+ /* ... and zero out IRQ */
+ devN->irq = 0;
+ /* ... and base MAC address off address of 1st port */
+ devN->dev_addr[5] += i;
+
+ ret = dgrs_initclone(devN);
+ if (ret)
+ goto fail;
+
+ SET_MODULE_OWNER(devN);
+ SET_NETDEV_DEV(dev, pdev);
+
+ ret = register_netdev(devN);
+ if (ret) {
+ free_netdev(devN);
+ goto fail;
+ }
+ privN->chan = i+1;
+ priv->devtbl[i] = devN;
+ }
+ return dev;
+
+ fail:
+ while (i >= 0) {
+ struct net_device *d = priv->devtbl[i--];
+ unregister_netdev(d);
+ free_netdev(d);
+ }
+
+ err2:
+ free_irq(dev->irq, dev);
+ err1:
+ free_netdev(dev);
+ err0:
+ return ERR_PTR(ret);
+}
+
+static void __devexit dgrs_remove(struct net_device *dev)
+{
+ DGRS_PRIV *priv = dev->priv;
+ int i;
+
+ unregister_netdev(dev);
+
+ for (i = 1; i < priv->nports; ++i) {
+ struct net_device *d = priv->devtbl[i];
+ if (d) {
+ unregister_netdev(d);
+ free_netdev(d);
+ }
+ }
+
+ proc_reset(priv->devtbl[0], 1);
+
+ if (priv->vmem)
+ iounmap(priv->vmem);
+ if (priv->vplxdma)
+ iounmap((uchar *) priv->vplxdma);
+
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+
+ for (i = 1; i < priv->nports; ++i) {
+ if (priv->devtbl[i])
+ unregister_netdev(priv->devtbl[i]);
+ }
+}
+
+#ifdef CONFIG_PCI
+static int __init dgrs_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev;
+ int err;
+ uint io;
+ uint mem;
+ uint irq;
+ uint plxreg;
+ uint plxdma;
+
+ /*
+ * Get and check the bus-master and latency values.
+ * Some PCI BIOSes fail to set the master-enable bit,
+ * and the latency timer must be set to the maximum
+ * value to avoid data corruption that occurs when the
+ * timer expires during a transfer. Yes, it's a bug.
+ */
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+ err = pci_request_regions(pdev, "RightSwitch");
+ if (err)
+ return err;
+
+ pci_set_master(pdev);
+
+ plxreg = pci_resource_start (pdev, 0);
+ io = pci_resource_start (pdev, 1);
+ mem = pci_resource_start (pdev, 2);
+ pci_read_config_dword(pdev, 0x30, &plxdma);
+ irq = pdev->irq;
+ plxdma &= ~15;
+
+ /*
+ * On some BIOSES, the PLX "expansion rom" (used for DMA)
+ * address comes up as "0". This is probably because
+ * the BIOS doesn't see a valid 55 AA ROM signature at
+ * the "ROM" start and zeroes the address. To get
+ * around this problem the SE-6 is configured to ask
+ * for 4 MB of space for the dual port memory. We then
+ * must set its range back to 2 MB, and use the upper
+ * half for DMA register access
+ */
+ OUTL(io + PLX_SPACE0_RANGE, 0xFFE00000L);
+ if (plxdma == 0)
+ plxdma = mem + (2048L * 1024L);
+ pci_write_config_dword(pdev, 0x30, plxdma + 1);
+ pci_read_config_dword(pdev, 0x30, &plxdma);
+ plxdma &= ~15;
+
+ dev = dgrs_found_device(io, mem, irq, plxreg, plxdma, &pdev->dev);
+ if (IS_ERR(dev)) {
+ pci_release_regions(pdev);
+ return PTR_ERR(dev);
+ }
+
+ pci_set_drvdata(pdev, dev);
+ return 0;
+}
+
+static void __devexit dgrs_pci_remove(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ dgrs_remove(dev);
+ pci_release_regions(pdev);
+ free_netdev(dev);
+}
+
+static struct pci_driver dgrs_pci_driver = {
+ .name = "dgrs",
+ .id_table = dgrs_pci_tbl,
+ .probe = dgrs_pci_probe,
+ .remove = __devexit_p(dgrs_pci_remove),
+};
+#endif
+
+
+#ifdef CONFIG_EISA
+static int is2iv[8] __initdata = { 0, 3, 5, 7, 10, 11, 12, 15 };
+
+static int __init dgrs_eisa_probe (struct device *gendev)
+{
+ struct net_device *dev;
+ struct eisa_device *edev = to_eisa_device(gendev);
+ uint io = edev->base_addr;
+ uint mem;
+ uint irq;
+ int rc = -ENODEV; /* Not EISA configured */
+
+ if (!request_region(io, 256, "RightSwitch")) {
+ printk(KERN_ERR "dgrs: eisa io 0x%x, which is busy.\n", io);
+ return -EBUSY;
+ }
+
+ if ( ! (inb(io+ES4H_EC) & ES4H_EC_ENABLE) )
+ goto err_out;
+
+ mem = (inb(io+ES4H_AS_31_24) << 24)
+ + (inb(io+ES4H_AS_23_16) << 16);
+
+ irq = is2iv[ inb(io+ES4H_IS) & ES4H_IS_INTMASK ];
+
+ dev = dgrs_found_device(io, mem, irq, 0L, 0L, gendev);
+ if (IS_ERR(dev)) {
+ rc = PTR_ERR(dev);
+ goto err_out;
+ }
+
+ gendev->driver_data = dev;
+ return 0;
+ err_out:
+ release_region(io, 256);
+ return rc;
+}
+
+static int __devexit dgrs_eisa_remove(struct device *gendev)
+{
+ struct net_device *dev = gendev->driver_data;
+
+ dgrs_remove(dev);
+
+ release_region(dev->base_addr, 256);
+
+ free_netdev(dev);
+ return 0;
+}
+
+
+static struct eisa_driver dgrs_eisa_driver = {
+ .id_table = dgrs_eisa_tbl,
+ .driver = {
+ .name = "dgrs",
+ .probe = dgrs_eisa_probe,
+ .remove = __devexit_p(dgrs_eisa_remove),
+ }
+};
+#endif
+
+/*
+ * Variables that can be overriden from module command line
+ */
+static int debug = -1;
+static int dma = -1;
+static int hashexpire = -1;
+static int spantree = -1;
+static int ipaddr[4] = { -1 };
+static int iptrap[4] = { -1 };
+static __u32 ipxnet = -1;
+static int nicmode = -1;
+
+module_param(debug, int, 0);
+module_param(dma, int, 0);
+module_param(hashexpire, int, 0);
+module_param(spantree, int, 0);
+module_param_array(ipaddr, int, NULL, 0);
+module_param_array(iptrap, int, NULL, 0);
+module_param(ipxnet, int, 0);
+module_param(nicmode, int, 0);
+MODULE_PARM_DESC(debug, "Digi RightSwitch enable debugging (0-1)");
+MODULE_PARM_DESC(dma, "Digi RightSwitch enable BM DMA (0-1)");
+MODULE_PARM_DESC(nicmode, "Digi RightSwitch operating mode (1: switch, 2: multi-NIC)");
+
+static int __init dgrs_init_module (void)
+{
+ int i;
+ int eisacount = 0, pcicount = 0;
+
+ /*
+ * Command line variable overrides
+ * debug=NNN
+ * dma=0/1
+ * spantree=0/1
+ * hashexpire=NNN
+ * ipaddr=A,B,C,D
+ * iptrap=A,B,C,D
+ * ipxnet=NNN
+ * nicmode=NNN
+ */
+ if (debug >= 0)
+ dgrs_debug = debug;
+ if (dma >= 0)
+ dgrs_dma = dma;
+ if (nicmode >= 0)
+ dgrs_nicmode = nicmode;
+ if (hashexpire >= 0)
+ dgrs_hashexpire = hashexpire;
+ if (spantree >= 0)
+ dgrs_spantree = spantree;
+ if (ipaddr[0] != -1)
+ for (i = 0; i < 4; ++i)
+ dgrs_ipaddr[i] = ipaddr[i];
+ if (iptrap[0] != -1)
+ for (i = 0; i < 4; ++i)
+ dgrs_iptrap[i] = iptrap[i];
+ if (ipxnet != -1)
+ dgrs_ipxnet = htonl( ipxnet );
+
+ if (dgrs_debug)
+ {
+ printk(KERN_INFO "dgrs: SW=%s FW=Build %d %s\nFW Version=%s\n",
+ version, dgrs_firmnum, dgrs_firmdate, dgrs_firmver);
+ }
+
+ /*
+ * Find and configure all the cards
+ */
+#ifdef CONFIG_EISA
+ eisacount = eisa_driver_register(&dgrs_eisa_driver);
+ if (eisacount < 0)
+ return eisacount;
+#endif
+#ifdef CONFIG_PCI
+ pcicount = pci_register_driver(&dgrs_pci_driver);
+ if (pcicount)
+ return pcicount;
+#endif
+ return 0;
+}
+
+static void __exit dgrs_cleanup_module (void)
+{
+#ifdef CONFIG_EISA
+ eisa_driver_unregister (&dgrs_eisa_driver);
+#endif
+#ifdef CONFIG_PCI
+ pci_unregister_driver (&dgrs_pci_driver);
+#endif
+}
+
+module_init(dgrs_init_module);
+module_exit(dgrs_cleanup_module);