diff options
Diffstat (limited to 'drivers/net/dgrs_plx9060.h')
| -rw-r--r-- | drivers/net/dgrs_plx9060.h | 175 |
1 files changed, 0 insertions, 175 deletions
diff --git a/drivers/net/dgrs_plx9060.h b/drivers/net/dgrs_plx9060.h deleted file mode 100644 index 6888ae0d0ce..00000000000 --- a/drivers/net/dgrs_plx9060.h +++ /dev/null @@ -1,175 +0,0 @@ -/* - * PLX 9060 PCI Interface chip - */ - -/* - * PCI configuration registers, same offset on local and PCI sides, - * but on PCI side, must use PCI BIOS calls to read/write. - */ -#define PCI_PLXREGS_BASE_ADDR 0x10 - -#define PCI_PLXREGS_IO_ADDR 0x14 - -#define PCI_SPACE0_BASE_ADDR 0x18 - -#define PCI_ROM_BASE_ADDR 0x30 -# define PCI_ROM_ENABLED 0x00000001 - -#define PCI_INT_LINE 0x3C - -/* - * Registers accessible directly from PCI and local side. - * Offset is from PCI side. Add PLX_LCL_OFFSET for local address. - */ -#define PLX_LCL_OFFSET 0x80 /* Offset of regs from local side */ - -/* - * Local Configuration Registers - */ -#define PLX_SPACE0_RANGE 0x00 /* Range for PCI to Lcl Addr Space 0 */ -#define PLX_SPACE0_BASE_ADDR 0x04 /* Lcl Base address remap */ - -#define PLX_ROM_RANGE 0x10 /* Range for expansion ROM (DMA) */ -#define PLX_ROM_BASE_ADDR 0x14 /* Lcl base address remap for ROM */ - -#define PLX_BUS_REGION 0x18 /* Bus Region Descriptors */ - -/* - * Shared Run Time Registers - */ -#define PLX_MBOX0 0x40 -#define PLX_MBOX1 0x44 -#define PLX_MBOX2 0x48 -#define PLX_MBOX3 0x4C -#define PLX_MBOX4 0x50 -#define PLX_MBOX5 0x54 -#define PLX_MBOX6 0x58 -#define PLX_MBOX7 0x5C - -#define PLX_PCI2LCL_DOORBELL 0x60 - -#define PLX_LCL2PCI_DOORBELL 0x64 - -#define PLX_INT_CSR 0x68 /* Interrupt Control/Status */ -# define PLX_LSERR_ENABLE 0x00000001 -# define PLX_LSERR_PE 0x00000002 -# define PLX_SERR 0x00000004 -# undef PLX_UNUSED /* 0x00000008 */ -# undef PLX_UNUSED /* 0x00000010 */ -# undef PLX_UNUSED /* 0x00000020 */ -# undef PLX_UNUSED /* 0x00000040 */ -# undef PLX_UNUSED /* 0x00000080 */ -# define PLX_PCI_IE 0x00000100 -# define PLX_PCI_DOORBELL_IE 0x00000200 -# define PLX_PCI_ABORT_IE 0x00000400 -# define PLX_PCI_LOCAL_IE 0x00000800 -# define PLX_RETRY_ABORT_ENABLE 0x00001000 -# define PLX_PCI_DOORBELL_INT 0x00002000 -# define PLX_PCI_ABORT_INT 0x00004000 -# define PLX_PCI_LOCAL_INT 0x00008000 -# define PLX_LCL_IE 0x00010000 -# define PLX_LCL_DOORBELL_IE 0x00020000 -# define PLX_LCL_DMA0_IE 0x00040000 -# define PLX_LCL_DMA1_IE 0x00080000 -# define PLX_LCL_DOORBELL_INT 0x00100000 -# define PLX_LCL_DMA0_INT 0x00200000 -# define PLX_LCL_DMA1_INT 0x00400000 -# define PLX_LCL_BIST_INT 0x00800000 -# define PLX_BM_DIRECT_ 0x01000000 -# define PLX_BM_DMA0_ 0x02000000 -# define PLX_BM_DMA1_ 0x04000000 -# define PLX_BM_ABORT_ 0x08000000 -# undef PLX_UNUSED /* 0x10000000 */ -# undef PLX_UNUSED /* 0x20000000 */ -# undef PLX_UNUSED /* 0x40000000 */ -# undef PLX_UNUSED /* 0x80000000 */ - -#define PLX_MISC_CSR 0x6c /* EEPROM,PCI,User,Init Control/Status*/ -# define PLX_USEROUT 0x00010000 -# define PLX_USERIN 0x00020000 -# define PLX_EECK 0x01000000 -# define PLX_EECS 0x02000000 -# define PLX_EEWD 0x04000000 -# define PLX_EERD 0x08000000 - -/* - * DMA registers. Offset is from local side - */ -#define PLX_DMA0_MODE 0x100 -# define PLX_DMA_MODE_WIDTH32 0x00000003 -# define PLX_DMA_MODE_WAITSTATES(X) ((X)<<2) -# define PLX_DMA_MODE_NOREADY 0x00000000 -# define PLX_DMA_MODE_READY 0x00000040 -# define PLX_DMA_MODE_NOBTERM 0x00000000 -# define PLX_DMA_MODE_BTERM 0x00000080 -# define PLX_DMA_MODE_NOBURST 0x00000000 -# define PLX_DMA_MODE_BURST 0x00000100 -# define PLX_DMA_MODE_NOCHAIN 0x00000000 -# define PLX_DMA_MODE_CHAIN 0x00000200 -# define PLX_DMA_MODE_DONE_IE 0x00000400 -# define PLX_DMA_MODE_ADDR_HOLD 0x00000800 - -#define PLX_DMA0_PCI_ADDR 0x104 - /* non-chaining mode PCI address */ - -#define PLX_DMA0_LCL_ADDR 0x108 - /* non-chaining mode local address */ - -#define PLX_DMA0_SIZE 0x10C - /* non-chaining mode length */ - -#define PLX_DMA0_DESCRIPTOR 0x110 -# define PLX_DMA_DESC_EOC 0x00000002 -# define PLX_DMA_DESC_TC_IE 0x00000004 -# define PLX_DMA_DESC_TO_HOST 0x00000008 -# define PLX_DMA_DESC_TO_BOARD 0x00000000 -# define PLX_DMA_DESC_NEXTADDR 0xFFFFfff0 - -#define PLX_DMA1_MODE 0x114 -#define PLX_DMA1_PCI_ADDR 0x118 -#define PLX_DMA1_LCL_ADDR 0x11C -#define PLX_DMA1_SIZE 0x110 -#define PLX_DMA1_DESCRIPTOR 0x124 - -#define PLX_DMA_CSR 0x128 -# define PLX_DMA_CSR_0_ENABLE 0x00000001 -# define PLX_DMA_CSR_0_START 0x00000002 -# define PLX_DMA_CSR_0_ABORT 0x00000004 -# define PLX_DMA_CSR_0_CLR_INTR 0x00000008 -# define PLX_DMA_CSR_0_DONE 0x00000010 -# define PLX_DMA_CSR_1_ENABLE 0x00000100 -# define PLX_DMA_CSR_1_START 0x00000200 -# define PLX_DMA_CSR_1_ABORT 0x00000400 -# define PLX_DMA_CSR_1_CLR_INTR 0x00000800 -# define PLX_DMA_CSR_1_DONE 0x00001000 - -#define PLX_DMA_ARB0 0x12C -# define PLX_DMA_ARB0_LATENCY_T 0x000000FF -# define PLX_DMA_ARB0_PAUSE_T 0x0000FF00 -# define PLX_DMA_ARB0_LATENCY_EN 0x00010000 -# define PLX_DMA_ARB0_PAUSE_EN 0x00020000 -# define PLX_DMA_ARB0_BREQ_EN 0x00040000 -# define PLX_DMA_ARB0_PRI 0x00180000 -# define PLX_DMA_ARB0_PRI_ROUND 0x00000000 -# define PLX_DMA_ARB0_PRI_0 0x00080000 -# define PLX_DMA_ARB0_PRI_1 0x00100000 - -#define PLX_DMA_ARB1 0x130 - /* Chan 0: FIFO DEPTH=16 */ -# define PLX_DMA_ARB1_0_P2L_LW_TRIG(X) ( ((X)&15) << 0 ) -# define PLX_DMA_ARB1_0_L2P_LR_TRIG(X) ( ((X)&15) << 4 ) -# define PLX_DMA_ARB1_0_L2P_PW_TRIG(X) ( ((X)&15) << 8 ) -# define PLX_DMA_ARB1_0_P2L_PR_TRIG(X) ( ((X)&15) << 12 ) - /* Chan 1: FIFO DEPTH=8 */ -# define PLX_DMA_ARB1_1_P2L_LW_TRIG(X) ( ((X)& 7) << 16 ) -# define PLX_DMA_ARB1_1_L2P_LR_TRIG(X) ( ((X)& 7) << 20 ) -# define PLX_DMA_ARB1_1_L2P_PW_TRIG(X) ( ((X)& 7) << 24 ) -# define PLX_DMA_ARB1_1_P2L_PR_TRIG(X) ( ((X)& 7) << 28 ) - -typedef struct _dmachain -{ - ulong pciaddr; - ulong lcladdr; - ulong len; - ulong next; -} DMACHAIN; |