diff options
Diffstat (limited to 'drivers/net/e1000/e1000_hw.c')
| -rw-r--r-- | drivers/net/e1000/e1000_hw.c | 101 |
1 files changed, 70 insertions, 31 deletions
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 8fc876da43b..a267c5235fc 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -68,6 +68,38 @@ static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw); static int32_t e1000_set_phy_mode(struct e1000_hw *hw); static int32_t e1000_host_if_read_cookie(struct e1000_hw *hw, uint8_t *buffer); static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length); +static uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); +static int32_t e1000_check_downshift(struct e1000_hw *hw); +static int32_t e1000_check_polarity(struct e1000_hw *hw, uint16_t *polarity); +static void e1000_clear_hw_cntrs(struct e1000_hw *hw); +static void e1000_clear_vfta(struct e1000_hw *hw); +static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); +static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, + boolean_t link_up); +static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw); +static int32_t e1000_detect_gig_phy(struct e1000_hw *hw); +static int32_t e1000_get_auto_rd_done(struct e1000_hw *hw); +static int32_t e1000_get_cable_length(struct e1000_hw *hw, + uint16_t *min_length, + uint16_t *max_length); +static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); +static int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw); +static int32_t e1000_id_led_init(struct e1000_hw * hw); +static void e1000_init_rx_addrs(struct e1000_hw *hw); +static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); +static int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); +static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); +static int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, + uint16_t words, uint16_t *data); +static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); +static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); +static int32_t e1000_wait_autoneg(struct e1000_hw *hw); + +static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, + uint32_t value); + +#define E1000_WRITE_REG_IO(a, reg, val) \ + e1000_write_reg_io((a), E1000_##reg, val) /* IGP cable length table */ static const @@ -2035,7 +2067,7 @@ e1000_force_mac_fc(struct e1000_hw *hw) * based on the flow control negotiated by the PHY. In TBI mode, the TFCE * and RFCE bits will be automaticaly set to the negotiated flow control mode. *****************************************************************************/ -int32_t +static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw) { int32_t ret_val; @@ -2537,7 +2569,7 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -int32_t +static int32_t e1000_wait_autoneg(struct e1000_hw *hw) { int32_t ret_val; @@ -3021,7 +3053,7 @@ e1000_phy_reset(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -int32_t +static int32_t e1000_detect_gig_phy(struct e1000_hw *hw) { int32_t phy_init_status, ret_val; @@ -3121,7 +3153,7 @@ e1000_phy_reset_dsp(struct e1000_hw *hw) * hw - Struct containing variables accessed by shared code * phy_info - PHY information structure ******************************************************************************/ -int32_t +static int32_t e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { @@ -3195,7 +3227,7 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, * hw - Struct containing variables accessed by shared code * phy_info - PHY information structure ******************************************************************************/ -int32_t +static int32_t e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { @@ -3905,7 +3937,7 @@ e1000_read_eeprom(struct e1000_hw *hw, * data - word read from the EEPROM * words - number of words to read *****************************************************************************/ -int32_t +static int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, @@ -3939,7 +3971,7 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw, * data - word read from the EEPROM * words - number of words to read *****************************************************************************/ -int32_t +static int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, @@ -3976,7 +4008,7 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -int32_t +static int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) { uint32_t attempts = 100000; @@ -4004,7 +4036,7 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) * * hw - Struct containing variables accessed by shared code ****************************************************************************/ -boolean_t +static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) { uint32_t eecd = 0; @@ -4322,7 +4354,7 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw, * data - word read from the EEPROM * words - number of words to read *****************************************************************************/ -int32_t +static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw) { uint32_t attempts = 100000; @@ -4453,7 +4485,7 @@ e1000_read_mac_addr(struct e1000_hw * hw) * of the receive addresss registers. Clears the multicast table. Assumes * the receiver is in reset when the routine is called. *****************************************************************************/ -void +static void e1000_init_rx_addrs(struct e1000_hw *hw) { uint32_t i; @@ -4481,6 +4513,7 @@ e1000_init_rx_addrs(struct e1000_hw *hw) } } +#if 0 /****************************************************************************** * Updates the MAC's list of multicast addresses. * @@ -4564,6 +4597,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, } DEBUGOUT("MC Update Complete\n"); } +#endif /* 0 */ /****************************************************************************** * Hashes an address to determine its location in the multicast table @@ -4705,7 +4739,7 @@ e1000_write_vfta(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -void +static void e1000_clear_vfta(struct e1000_hw *hw) { uint32_t offset; @@ -4735,7 +4769,7 @@ e1000_clear_vfta(struct e1000_hw *hw) } } -int32_t +static int32_t e1000_id_led_init(struct e1000_hw * hw) { uint32_t ledctl; @@ -4997,7 +5031,7 @@ e1000_led_off(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -void +static void e1000_clear_hw_cntrs(struct e1000_hw *hw) { volatile uint32_t temp; @@ -5283,6 +5317,8 @@ e1000_get_bus_info(struct e1000_hw *hw) break; } } + +#if 0 /****************************************************************************** * Reads a value from one of the devices registers using port I/O (as opposed * memory mapped I/O). Only 82544 and newer devices support port I/O. @@ -5300,6 +5336,7 @@ e1000_read_reg_io(struct e1000_hw *hw, e1000_io_write(hw, io_addr, offset); return e1000_io_read(hw, io_data); } +#endif /* 0 */ /****************************************************************************** * Writes a value to one of the devices registers using port I/O (as opposed to @@ -5309,7 +5346,7 @@ e1000_read_reg_io(struct e1000_hw *hw, * offset - offset to write to * value - value to write *****************************************************************************/ -void +static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value) @@ -5337,7 +5374,7 @@ e1000_write_reg_io(struct e1000_hw *hw, * register to the minimum and maximum range. * For IGP phy's, the function calculates the range by the AGC registers. *****************************************************************************/ -int32_t +static int32_t e1000_get_cable_length(struct e1000_hw *hw, uint16_t *min_length, uint16_t *max_length) @@ -5489,7 +5526,7 @@ e1000_get_cable_length(struct e1000_hw *hw, * return 0. If the link speed is 1000 Mbps the polarity status is in the * IGP01E1000_PHY_PCS_INIT_REG. *****************************************************************************/ -int32_t +static int32_t e1000_check_polarity(struct e1000_hw *hw, uint16_t *polarity) { @@ -5551,7 +5588,7 @@ e1000_check_polarity(struct e1000_hw *hw, * Link Health register. In IGP this bit is latched high, so the driver must * read it immediately after link is established. *****************************************************************************/ -int32_t +static int32_t e1000_check_downshift(struct e1000_hw *hw) { int32_t ret_val; @@ -5592,7 +5629,7 @@ e1000_check_downshift(struct e1000_hw *hw) * ****************************************************************************/ -int32_t +static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up) { @@ -5823,7 +5860,7 @@ e1000_set_phy_mode(struct e1000_hw *hw) * ****************************************************************************/ -int32_t +static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active) { @@ -5936,7 +5973,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, * ****************************************************************************/ -int32_t +static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active) { @@ -6103,7 +6140,7 @@ e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer) * timeout * - E1000_SUCCESS for success. ****************************************************************************/ -int32_t +static int32_t e1000_mng_enable_host_if(struct e1000_hw * hw) { uint32_t hicr; @@ -6137,7 +6174,7 @@ e1000_mng_enable_host_if(struct e1000_hw * hw) * * returns - E1000_SUCCESS for success. ****************************************************************************/ -int32_t +static int32_t e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer, uint16_t length, uint16_t offset, uint8_t *sum) { @@ -6205,7 +6242,7 @@ e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer, * * returns - E1000_SUCCESS for success. ****************************************************************************/ -int32_t +static int32_t e1000_mng_write_cmd_header(struct e1000_hw * hw, struct e1000_host_mng_command_header * hdr) { @@ -6243,7 +6280,7 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw, * * returns - E1000_SUCCESS for success. ****************************************************************************/ -int32_t +static int32_t e1000_mng_write_commit( struct e1000_hw * hw) { @@ -6496,7 +6533,7 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw) * returns: - none. * ***************************************************************************/ -void +static void e1000_set_pci_express_master_disable(struct e1000_hw *hw) { uint32_t ctrl; @@ -6511,6 +6548,7 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL, ctrl); } +#if 0 /*************************************************************************** * * Enables PCI-Express master access. @@ -6534,6 +6572,7 @@ e1000_enable_pciex_master(struct e1000_hw *hw) ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE; E1000_WRITE_REG(hw, CTRL, ctrl); } +#endif /* 0 */ /******************************************************************************* * @@ -6584,7 +6623,7 @@ e1000_disable_pciex_master(struct e1000_hw *hw) * E1000_SUCCESS at any other case. * ******************************************************************************/ -int32_t +static int32_t e1000_get_auto_rd_done(struct e1000_hw *hw) { int32_t timeout = AUTO_READ_DONE_TIMEOUT; @@ -6623,7 +6662,7 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) * E1000_SUCCESS at any other case. * ***************************************************************************/ -int32_t +static int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw) { int32_t timeout = PHY_CFG_TIMEOUT; @@ -6666,7 +6705,7 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw) * E1000_SUCCESS at any other case. * ***************************************************************************/ -int32_t +static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) { int32_t timeout; @@ -6711,7 +6750,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) * returns: - None. * ***************************************************************************/ -void +static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) { uint32_t swsm; @@ -6747,7 +6786,7 @@ e1000_check_phy_reset_block(struct e1000_hw *hw) E1000_BLK_PHY_RESET : E1000_SUCCESS; } -uint8_t +static uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw) { uint32_t fwsm; |