diff options
Diffstat (limited to 'drivers/net/e1000/e1000_hw.h')
| -rw-r--r-- | drivers/net/e1000/e1000_hw.h | 398 |
1 files changed, 392 insertions, 6 deletions
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 467c9ed944f..f9341e3276b 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -62,6 +62,7 @@ typedef enum { e1000_82572, e1000_82573, e1000_80003es2lan, + e1000_ich8lan, e1000_num_macs } e1000_mac_type; @@ -70,6 +71,7 @@ typedef enum { e1000_eeprom_spi, e1000_eeprom_microwire, e1000_eeprom_flash, + e1000_eeprom_ich8, e1000_eeprom_none, /* No NVM support */ e1000_num_eeprom_types } e1000_eeprom_type; @@ -98,6 +100,11 @@ typedef enum { e1000_fc_default = 0xFF } e1000_fc_type; +struct e1000_shadow_ram { + uint16_t eeprom_word; + boolean_t modified; +}; + /* PCI bus types */ typedef enum { e1000_bus_type_unknown = 0, @@ -218,6 +225,8 @@ typedef enum { e1000_phy_igp, e1000_phy_igp_2, e1000_phy_gg82563, + e1000_phy_igp_3, + e1000_phy_ife, e1000_phy_undefined = 0xFF } e1000_phy_type; @@ -313,6 +322,10 @@ int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); int32_t e1000_phy_hw_reset(struct e1000_hw *hw); int32_t e1000_phy_reset(struct e1000_hw *hw); +void e1000_phy_powerdown_workaround(struct e1000_hw *hw); +int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); +int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size); +int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); int32_t e1000_validate_mdi_setting(struct e1000_hw *hw); int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data); @@ -331,6 +344,7 @@ uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw); #define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ #define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ #define E1000_MNG_IAMT_MODE 0x3 +#define E1000_MNG_ICH_IAMT_MODE 0x2 #define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */ #define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */ @@ -388,6 +402,8 @@ int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num); int32_t e1000_read_mac_addr(struct e1000_hw * hw); int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); +void e1000_release_software_flag(struct e1000_hw *hw); +int32_t e1000_get_software_flag(struct e1000_hw *hw); /* Filters (multicast, vlan, receive) */ void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count); @@ -401,6 +417,7 @@ int32_t e1000_setup_led(struct e1000_hw *hw); int32_t e1000_cleanup_led(struct e1000_hw *hw); int32_t e1000_led_on(struct e1000_hw *hw); int32_t e1000_led_off(struct e1000_hw *hw); +int32_t e1000_blink_led_start(struct e1000_hw *hw); /* Adaptive IFS Functions */ @@ -422,6 +439,29 @@ int32_t e1000_disable_pciex_master(struct e1000_hw *hw); int32_t e1000_get_software_semaphore(struct e1000_hw *hw); void e1000_release_software_semaphore(struct e1000_hw *hw); int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); +int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop); + +int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, + uint8_t *data); +int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, + uint8_t byte); +int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, + uint8_t byte); +int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, + uint16_t *data); +int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, + uint32_t size, uint16_t *data); +int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, + uint16_t words, uint16_t *data); +int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, + uint16_t words, uint16_t *data); +int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment); + + +#define E1000_READ_REG_IO(a, reg) \ + e1000_read_reg_io((a), E1000_##reg) +#define E1000_WRITE_REG_IO(a, reg, val) \ + e1000_write_reg_io((a), E1000_##reg, val) /* PCI Device IDs */ #define E1000_DEV_ID_82542 0x1000 @@ -446,6 +486,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D #define E1000_DEV_ID_82541EI 0x1013 #define E1000_DEV_ID_82541EI_MOBILE 0x1018 +#define E1000_DEV_ID_82541ER_LOM 0x1014 #define E1000_DEV_ID_82541ER 0x1078 #define E1000_DEV_ID_82547GI 0x1075 #define E1000_DEV_ID_82541GI 0x1076 @@ -457,18 +498,28 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82546GB_PCIE 0x108A #define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 #define E1000_DEV_ID_82547EI 0x1019 +#define E1000_DEV_ID_82547EI_MOBILE 0x101A #define E1000_DEV_ID_82571EB_COPPER 0x105E #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 #define E1000_DEV_ID_82572EI_COPPER 0x107D #define E1000_DEV_ID_82572EI_FIBER 0x107E #define E1000_DEV_ID_82572EI_SERDES 0x107F +#define E1000_DEV_ID_82572EI 0x10B9 #define E1000_DEV_ID_82573E 0x108B #define E1000_DEV_ID_82573E_IAMT 0x108C #define E1000_DEV_ID_82573L 0x109A #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5 #define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096 #define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098 +#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA +#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB + +#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049 +#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A +#define E1000_DEV_ID_ICH8_IGP_C 0x104B +#define E1000_DEV_ID_ICH8_IFE 0x104C +#define E1000_DEV_ID_ICH8_IGP_M 0x104D #define NODE_ADDRESS_SIZE 6 @@ -539,6 +590,14 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); E1000_IMS_RXSEQ | \ E1000_IMS_LSC) +/* Additional interrupts need to be handled for e1000_ich8lan: + DSW = The FW changed the status of the DISSW bit in FWSM + PHYINT = The LAN connected device generates an interrupt + EPRST = Manageability reset event */ +#define IMS_ICH8LAN_ENABLE_MASK (\ + E1000_IMS_DSW | \ + E1000_IMS_PHYINT | \ + E1000_IMS_EPRST) /* Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. We @@ -546,6 +605,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); * E1000_RAR_ENTRIES - 1 multicast addresses. */ #define E1000_RAR_ENTRIES 15 +#define E1000_RAR_ENTRIES_ICH8LAN 7 #define MIN_NUMBER_OF_DESCRIPTORS 8 #define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 @@ -767,6 +827,9 @@ struct e1000_data_desc { #define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ #define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ +#define E1000_NUM_UNICAST_ICH8LAN 7 +#define E1000_MC_TBL_SIZE_ICH8LAN 32 + /* Receive Address Register */ struct e1000_rar { @@ -776,6 +839,7 @@ struct e1000_rar { /* Number of entries in the Multicast Table Array (MTA). */ #define E1000_NUM_MTA_REGISTERS 128 +#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32 /* IPv4 Address Table Entry */ struct e1000_ipv4_at_entry { @@ -786,6 +850,7 @@ struct e1000_ipv4_at_entry { /* Four wakeup IP addresses are supported */ #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4 #define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX +#define E1000_IP4AT_SIZE_ICH8LAN 3 #define E1000_IP6AT_SIZE 1 /* IPv6 Address Table Entry */ @@ -844,6 +909,7 @@ struct e1000_ffvt_entry { #define E1000_FLA 0x0001C /* Flash Access - RW */ #define E1000_MDIC 0x00020 /* MDI Control - RW */ #define E1000_SCTL 0x00024 /* SerDes Control - RW */ +#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */ #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ #define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ @@ -872,6 +938,8 @@ struct e1000_ffvt_entry { #define E1000_LEDCTL 0x00E00 /* LED Control - RW */ #define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ #define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ +#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ +#define FEXTNVM_SW_CONFIG 0x0001 #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ #define E1000_PBS 0x01008 /* Packet Buffer Size */ #define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ @@ -899,11 +967,13 @@ struct e1000_ffvt_entry { #define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */ #define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */ #define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */ -#define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */ +#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */ +#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */ #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ #define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ #define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ +#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ #define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ #define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ #define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */ @@ -1050,6 +1120,7 @@ struct e1000_ffvt_entry { #define E1000_82542_FLA E1000_FLA #define E1000_82542_MDIC E1000_MDIC #define E1000_82542_SCTL E1000_SCTL +#define E1000_82542_FEXTNVM E1000_FEXTNVM #define E1000_82542_FCAL E1000_FCAL #define E1000_82542_FCAH E1000_FCAH #define E1000_82542_FCT E1000_FCT @@ -1073,6 +1144,19 @@ struct e1000_ffvt_entry { #define E1000_82542_RDLEN0 E1000_82542_RDLEN #define E1000_82542_RDH0 E1000_82542_RDH #define E1000_82542_RDT0 E1000_82542_RDT +#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication + * RX Control - RW */ +#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8)) +#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */ +#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */ +#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */ +#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */ +#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */ +#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */ +#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */ +#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */ +#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */ +#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */ #define E1000_82542_RDTR1 0x00130 #define E1000_82542_RDBAL1 0x00138 #define E1000_82542_RDBAH1 0x0013C @@ -1110,11 +1194,14 @@ struct e1000_ffvt_entry { #define E1000_82542_FLOP E1000_FLOP #define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL #define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE +#define E1000_82542_PHY_CTRL E1000_PHY_CTRL #define E1000_82542_ERT E1000_ERT #define E1000_82542_RXDCTL E1000_RXDCTL +#define E1000_82542_RXDCTL1 E1000_RXDCTL1 #define E1000_82542_RADV E1000_RADV #define E1000_82542_RSRPD E1000_RSRPD #define E1000_82542_TXDMAC E1000_TXDMAC +#define E1000_82542_KABGTXD E1000_KABGTXD #define E1000_82542_TDFHS E1000_TDFHS #define E1000_82542_TDFTS E1000_TDFTS #define E1000_82542_TDFPC E1000_TDFPC @@ -1310,13 +1397,16 @@ struct e1000_hw_stats { /* Structure containing variables used by the shared code (e1000_hw.c) */ struct e1000_hw { - uint8_t __iomem *hw_addr; + uint8_t *hw_addr; uint8_t *flash_address; e1000_mac_type mac_type; e1000_phy_type phy_type; uint32_t phy_init_script; e1000_media_type media_type; void *back; + struct e1000_shadow_ram *eeprom_shadow_ram; + uint32_t flash_bank_size; + uint32_t flash_base_addr; e1000_fc_type fc; e1000_bus_speed bus_speed; e1000_bus_width bus_width; @@ -1328,6 +1418,7 @@ struct e1000_hw { uint32_t asf_firmware_present; uint32_t eeprom_semaphore_present; uint32_t swfw_sync_present; + uint32_t swfwhw_semaphore_present; unsigned long io_base; uint32_t phy_id; uint32_t phy_revision; @@ -1387,6 +1478,7 @@ struct e1000_hw { boolean_t in_ifs_mode; boolean_t mng_reg_access_disabled; boolean_t leave_av_bit_off; + boolean_t kmrn_lock_loss_workaround_disabled; }; @@ -1435,6 +1527,7 @@ struct e1000_hw { #define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */ #define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ #define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ +#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */ /* Device Status */ #define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ @@ -1449,6 +1542,8 @@ struct e1000_hw { #define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ #define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ #define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ +#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion + by EEPROM/Flash */ #define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ #define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */ #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ @@ -1506,6 +1601,10 @@ struct e1000_hw { #define E1000_STM_OPCODE 0xDB00 #define E1000_HICR_FW_RESET 0xC0 +#define E1000_SHADOW_RAM_WORDS 2048 +#define E1000_ICH8_NVM_SIG_WORD 0x13 +#define E1000_ICH8_NVM_SIG_MASK 0xC0 + /* EEPROM Read */ #define E1000_EERD_START 0x00000001 /* Start Read */ #define E1000_EERD_DONE 0x00000010 /* Read Done */ @@ -1551,7 +1650,6 @@ struct e1000_hw { #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 -#define E1000_CTRL_EXT_CANC 0x04000000 /* Interrupt delay cancellation */ #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ @@ -1591,12 +1689,31 @@ struct e1000_hw { #define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800 /* In-Band Control */ +#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT 0x00000500 #define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010 /* Half-Duplex Control */ #define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004 #define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000 +#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL 0x0000001E + +#define E1000_KUMCTRLSTA_DIAG_FELPBK 0x2000 +#define E1000_KUMCTRLSTA_DIAG_NELPBK 0x1000 + +#define E1000_KUMCTRLSTA_K0S_100_EN 0x2000 +#define E1000_KUMCTRLSTA_K0S_GBE_EN 0x1000 +#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK 0x0003 + +#define E1000_KABGTXD_BGSQLBIAS 0x00050000 + +#define E1000_PHY_CTRL_SPD_EN 0x00000001 +#define E1000_PHY_CTRL_D0A_LPLU 0x00000002 +#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004 +#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008 +#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040 +#define E1000_PHY_CTRL_B2B_EN 0x00000080 + /* LED Control */ #define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F #define E1000_LEDCTL_LED0_MODE_SHIFT 0 @@ -1666,6 +1783,9 @@ struct e1000_hw { #define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */ #define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */ #define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */ +#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */ +#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */ +#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */ /* Interrupt Cause Set */ #define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1692,6 +1812,9 @@ struct e1000_hw { #define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ #define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ #define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_ICS_DSW E1000_ICR_DSW +#define E1000_ICS_PHYINT E1000_ICR_PHYINT +#define E1000_ICS_EPRST E1000_ICR_EPRST /* Interrupt Mask Set */ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1718,6 +1841,9 @@ struct e1000_hw { #define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ #define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ #define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_IMS_DSW E1000_ICR_DSW +#define E1000_IMS_PHYINT E1000_ICR_PHYINT +#define E1000_IMS_EPRST E1000_ICR_EPRST /* Interrupt Mask Clear */ #define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1744,6 +1870,9 @@ struct e1000_hw { #define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ #define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ #define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_IMC_DSW E1000_ICR_DSW +#define E1000_IMC_PHYINT E1000_ICR_PHYINT +#define E1000_IMC_EPRST E1000_ICR_EPRST /* Receive Control */ #define E1000_RCTL_RST 0x00000001 /* Software reset */ @@ -1918,9 +2047,10 @@ struct e1000_hw { #define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 #define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 #define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 -#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00040000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 #define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000 #define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 /* Definitions for power management and wakeup registers */ /* Wake Up Control */ @@ -2010,6 +2140,15 @@ struct e1000_hw { #define E1000_FWSM_MODE_SHIFT 1 #define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */ +#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */ +#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */ +#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */ +#define E1000_FWSM_SKUEL_SHIFT 29 +#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */ +#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */ +#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */ +#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */ + /* FFLT Debug Register */ #define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */ @@ -2082,6 +2221,8 @@ struct e1000_host_command_info { E1000_GCR_TXDSCW_NO_SNOOP | \ E1000_GCR_TXDSCR_NO_SNOOP) +#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL + #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 /* Function Active and Power State to MNG */ #define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 @@ -2140,8 +2281,10 @@ struct e1000_host_command_info { #define EEPROM_PHY_CLASS_WORD 0x0007 #define EEPROM_INIT_CONTROL1_REG 0x000A #define EEPROM_INIT_CONTROL2_REG 0x000F +#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010 #define EEPROM_INIT_CONTROL3_PORT_B 0x0014 #define EEPROM_INIT_3GIO_3 0x001A +#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020 #define EEPROM_INIT_CONTROL3_PORT_A 0x0024 #define EEPROM_CFG 0x0012 #define EEPROM_FLASH_VERSION 0x0032 @@ -2153,10 +2296,16 @@ struct e1000_host_command_info { /* Word definitions for ID LED Settings */ #define ID_LED_RESERVED_0000 0x0000 #define ID_LED_RESERVED_FFFF 0xFFFF +#define ID_LED_RESERVED_82573 0xF746 +#define ID_LED_DEFAULT_82573 0x1811 #define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ (ID_LED_OFF1_OFF2 << 8) | \ (ID_LED_DEF1_DEF2 << 4) | \ (ID_LED_DEF1_DEF2)) +#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_DEF1_OFF2 << 8) | \ + (ID_LED_DEF1_ON2 << 4) | \ + (ID_LED_DEF1_DEF2)) #define ID_LED_DEF1_DEF2 0x1 #define ID_LED_DEF1_ON2 0x2 #define ID_LED_DEF1_OFF2 0x3 @@ -2191,6 +2340,11 @@ struct e1000_host_command_info { #define EEPROM_WORD0F_ASM_DIR 0x2000 #define EEPROM_WORD0F_ANE 0x0800 #define EEPROM_WORD0F_SWPDIO_EXT 0x00F0 +#define EEPROM_WORD0F_LPLU 0x0001 + +/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */ +#define EEPROM_WORD1020_GIGA_DISABLE 0x0010 +#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008 /* Mask bits for fields in Word 0x1a of the EEPROM */ #define EEPROM_WORD1A_ASPM_MASK 0x000C @@ -2265,23 +2419,29 @@ struct e1000_host_command_info { #define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010 #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 #define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040 -#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x1FFF0000 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x0FFF0000 #define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF #define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000 +#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 /* PBA constants */ +#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */ #define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */ #define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ #define E1000_PBA_22K 0x0016 #define E1000_PBA_24K 0x0018 #define E1000_PBA_30K 0x001E #define E1000_PBA_32K 0x0020 +#define E1000_PBA_34K 0x0022 #define E1000_PBA_38K 0x0026 #define E1000_PBA_40K 0x0028 #define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */ +#define E1000_PBS_16K E1000_PBA_16K + /* Flow Control Constants */ #define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 @@ -2336,7 +2496,7 @@ struct e1000_host_command_info { /* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */ #define AUTO_READ_DONE_TIMEOUT 10 /* Number of milliseconds we wait for PHY configuration done after MAC reset */ -#define PHY_CFG_TIMEOUT 40 +#define PHY_CFG_TIMEOUT 100 #define E1000_TX_BUFFER_SIZE ((uint32_t)1514) @@ -2764,6 +2924,17 @@ struct e1000_host_command_info { #define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ #define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */ +/* M88EC018 Rev 2 specific DownShift settings */ +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00 + /* IGP01E1000 Specific Port Config Register - R/W */ #define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010 #define IGP01E1000_PSCFR_PRE_EN 0x0020 @@ -2990,6 +3161,221 @@ struct e1000_host_command_info { #define L1LXT971A_PHY_ID 0x001378E0 #define GG82563_E_PHY_ID 0x01410CA0 + +/* Bits... + * 15-5: page + * 4-0: register offset + */ +#define PHY_PAGE_SHIFT 5 +#define PHY_REG(page, reg) \ + (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) + +#define IGP3_PHY_PORT_CTRL \ + PHY_REG(769, 17) /* Port General Configuration */ +#define IGP3_PHY_RATE_ADAPT_CTRL \ + PHY_REG(769, 25) /* Rate Adapter Control Register */ + +#define IGP3_KMRN_FIFO_CTRL_STATS \ + PHY_REG(770, 16) /* KMRN FIFO's control/status register */ +#define IGP3_KMRN_POWER_MNG_CTRL \ + PHY_REG(770, 17) /* KMRN Power Management Control Register */ +#define IGP3_KMRN_INBAND_CTRL \ + PHY_REG(770, 18) /* KMRN Inband Control Register */ +#define IGP3_KMRN_DIAG \ + PHY_REG(770, 19) /* KMRN Diagnostic register */ +#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */ +#define IGP3_KMRN_ACK_TIMEOUT \ + PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */ + +#define IGP3_VR_CTRL \ + PHY_REG(776, 18) /* Voltage regulator control register */ +#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */ + +#define IGP3_CAPABILITY \ + PHY_REG(776, 19) /* IGP3 Capability Register */ + +/* Capabilities for SKU Control */ +#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */ +#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */ +#define IGP3_CAP_ASF 0x0004 /* Support ASF */ +#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */ +#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */ +#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */ +#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */ +#define IGP3_CAP_RSS 0x0080 /* Support RSS */ +#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */ +#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */ + +#define IGP3_PPC_JORDAN_EN 0x0001 +#define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002 + +#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS 0x0001 +#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK 0x001E +#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020 +#define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040 + +#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */ +#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */ + +#define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18) +#define IGP3_KMRN_EC_DIS_INBAND 0x0080 + +#define IGP03E1000_E_PHY_ID 0x02A80390 +#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */ +#define IFE_PLUS_E_PHY_ID 0x02A80320 +#define IFE_C_E_PHY_ID 0x02A80310 + +#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */ +#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */ +#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */ +#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnet Counter */ +#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */ +#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */ +#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */ +#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */ +#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */ +#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */ +#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */ +#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */ +#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */ + +#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Defaut 1 = Disable auto reduced power down */ +#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */ +#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */ +#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */ +#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */ +#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */ +#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */ +#define IFE_PESC_POLARITY_REVERSED_SHIFT 8 + +#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dyanmic Power Down disabled */ +#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */ +#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */ +#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */ +#define IFE_PSC_FORCE_POLARITY_SHIFT 5 +#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4 + +#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */ +#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */ +#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ +#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorthm is completed */ +#define IFE_PMC_MDIX_MODE_SHIFT 6 +#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */ + +#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */ +#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */ +#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */ +#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */ +#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */ +#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */ +#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */ +#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */ +#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */ +#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ +#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ + +#define ICH8_FLASH_COMMAND_TIMEOUT 500 /* 500 ms , should be adjusted */ +#define ICH8_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles , should be adjusted */ +#define ICH8_FLASH_SEG_SIZE_256 256 +#define ICH8_FLASH_SEG_SIZE_4K 4096 +#define ICH8_FLASH_SEG_SIZE_64K 65536 + +#define ICH8_CYCLE_READ 0x0 +#define ICH8_CYCLE_RESERVED 0x1 +#define ICH8_CYCLE_WRITE 0x2 +#define ICH8_CYCLE_ERASE 0x3 + +#define ICH8_FLASH_GFPREG 0x0000 +#define ICH8_FLASH_HSFSTS 0x0004 +#define ICH8_FLASH_HSFCTL 0x0006 +#define ICH8_FLASH_FADDR 0x0008 +#define ICH8_FLASH_FDATA0 0x0010 +#define ICH8_FLASH_FRACC 0x0050 +#define ICH8_FLASH_FREG0 0x0054 +#define ICH8_FLASH_FREG1 0x0058 +#define ICH8_FLASH_FREG2 0x005C +#define ICH8_FLASH_FREG3 0x0060 +#define ICH8_FLASH_FPR0 0x0074 +#define ICH8_FLASH_FPR1 0x0078 +#define ICH8_FLASH_SSFSTS 0x0090 +#define ICH8_FLASH_SSFCTL 0x0092 +#define ICH8_FLASH_PREOP 0x0094 +#define ICH8_FLASH_OPTYPE 0x0096 +#define ICH8_FLASH_OPMENU 0x0098 + +#define ICH8_FLASH_REG_MAPSIZE 0x00A0 +#define ICH8_FLASH_SECTOR_SIZE 4096 +#define ICH8_GFPREG_BASE_MASK 0x1FFF +#define ICH8_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF + +/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ +/* Offset 04h HSFSTS */ +union ich8_hws_flash_status { + struct ich8_hsfsts { +#ifdef E1000_BIG_ENDIAN + uint16_t reserved2 :6; + uint16_t fldesvalid :1; + uint16_t flockdn :1; + uint16_t flcdone :1; + uint16_t flcerr :1; + uint16_t dael :1; + uint16_t berasesz :2; + uint16_t flcinprog :1; + uint16_t reserved1 :2; +#else + uint16_t flcdone :1; /* bit 0 Flash Cycle Done */ + uint16_t flcerr :1; /* bit 1 Flash Cycle Error */ + uint16_t dael :1; /* bit 2 Direct Access error Log */ + uint16_t berasesz :2; /* bit 4:3 Block/Sector Erase Size */ + uint16_t flcinprog :1; /* bit 5 flash SPI cycle in Progress */ + uint16_t reserved1 :2; /* bit 13:6 Reserved */ + uint16_t reserved2 :6; /* bit 13:6 Reserved */ + uint16_t fldesvalid :1; /* bit 14 Flash Descriptor Valid */ + uint16_t flockdn :1; /* bit 15 Flash Configuration Lock-Down */ +#endif + } hsf_status; + uint16_t regval; +}; + +/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */ +/* Offset 06h FLCTL */ +union ich8_hws_flash_ctrl { + struct ich8_hsflctl { +#ifdef E1000_BIG_ENDIAN + uint16_t fldbcount :2; + uint16_t flockdn :6; + uint16_t flcgo :1; + uint16_t flcycle :2; + uint16_t reserved :5; +#else + uint16_t flcgo :1; /* 0 Flash Cycle Go */ + uint16_t flcycle :2; /* 2:1 Flash Cycle */ + uint16_t reserved :5; /* 7:3 Reserved */ + uint16_t fldbcount :2; /* 9:8 Flash Data Byte Count */ + uint16_t flockdn :6; /* 15:10 Reserved */ +#endif + } hsf_ctrl; + uint16_t regval; +}; + +/* ICH8 Flash Region Access Permissions */ +union ich8_hws_flash_regacc { + struct ich8_flracc { +#ifdef E1000_BIG_ENDIAN + uint32_t gmwag :8; + uint32_t gmrag :8; + uint32_t grwa :8; + uint32_t grra :8; +#else + uint32_t grra :8; /* 0:7 GbE region Read Access */ + uint32_t grwa :8; /* 8:15 GbE region Write Access */ + uint32_t gmrag :8; /* 23:16 GbE Master Read Access Grant */ + uint32_t gmwag :8; /* 31:24 GbE Master Write Access Grant */ +#endif + } hsf_flregacc; + uint16_t regval; +}; + /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF #define PHY_SOF 0x01 |