diff options
Diffstat (limited to 'drivers/net/e1000e/phy.c')
-rw-r--r-- | drivers/net/e1000e/phy.c | 92 |
1 files changed, 46 insertions, 46 deletions
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 95a8196cf44..cff1df20403 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -212,7 +212,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) u32 i, mdic = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + e_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -239,11 +239,11 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Read did not complete\n"); + e_dbg("MDI Read did not complete\n"); return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + e_dbg("MDI Error\n"); return -E1000_ERR_PHY; } *data = (u16) mdic; @@ -265,7 +265,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) u32 i, mdic = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + e_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -293,11 +293,11 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Write did not complete\n"); + e_dbg("MDI Write did not complete\n"); return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + e_dbg("MDI Error\n"); return -E1000_ERR_PHY; } @@ -786,7 +786,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) /* Commit the changes. */ ret_val = e1000e_commit_phy(hw); if (ret_val) { - hw_dbg(hw, "Error committing the PHY changes\n"); + e_dbg("Error committing the PHY changes\n"); return ret_val; } @@ -823,7 +823,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) ret_val = e1000_phy_hw_reset(hw); if (ret_val) { - hw_dbg(hw, "Error resetting the PHY.\n"); + e_dbg("Error resetting the PHY.\n"); return ret_val; } @@ -836,7 +836,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) /* disable lplu d0 during driver init */ ret_val = e1000_set_d0_lplu_state(hw, 0); if (ret_val) { - hw_dbg(hw, "Error Disabling LPLU D0\n"); + e_dbg("Error Disabling LPLU D0\n"); return ret_val; } /* Configure mdi-mdix settings */ @@ -972,39 +972,39 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) NWAY_AR_10T_HD_CAPS); mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); - hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised); + e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); /* Do we want to advertise 10 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_HALF) { - hw_dbg(hw, "Advertise 10mb Half duplex\n"); + e_dbg("Advertise 10mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; } /* Do we want to advertise 10 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_FULL) { - hw_dbg(hw, "Advertise 10mb Full duplex\n"); + e_dbg("Advertise 10mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; } /* Do we want to advertise 100 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_HALF) { - hw_dbg(hw, "Advertise 100mb Half duplex\n"); + e_dbg("Advertise 100mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; } /* Do we want to advertise 100 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_FULL) { - hw_dbg(hw, "Advertise 100mb Full duplex\n"); + e_dbg("Advertise 100mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; } /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ if (phy->autoneg_advertised & ADVERTISE_1000_HALF) - hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n"); + e_dbg("Advertise 1000mb Half duplex request denied!\n"); /* Do we want to advertise 1000 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { - hw_dbg(hw, "Advertise 1000mb Full duplex\n"); + e_dbg("Advertise 1000mb Full duplex\n"); mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; } @@ -1063,7 +1063,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + e_dbg("Flow control param set incorrectly\n"); ret_val = -E1000_ERR_CONFIG; return ret_val; } @@ -1072,7 +1072,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); + e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); if (phy->autoneg_mask & ADVERTISE_1000_FULL) { ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); @@ -1109,13 +1109,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_advertised == 0) phy->autoneg_advertised = phy->autoneg_mask; - hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n"); + e_dbg("Reconfiguring auto-neg advertisement params\n"); ret_val = e1000_phy_setup_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error Setting up Auto-Negotiation\n"); + e_dbg("Error Setting up Auto-Negotiation\n"); return ret_val; } - hw_dbg(hw, "Restarting Auto-Neg\n"); + e_dbg("Restarting Auto-Neg\n"); /* * Restart auto-negotiation by setting the Auto Neg Enable bit and @@ -1137,7 +1137,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_wait_to_complete) { ret_val = e1000_wait_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error while waiting for " + e_dbg("Error while waiting for " "autoneg to complete\n"); return ret_val; } @@ -1175,10 +1175,10 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) * PHY will be set to 10H, 10F, 100H or 100F * depending on user settings. */ - hw_dbg(hw, "Forcing Speed and Duplex\n"); + e_dbg("Forcing Speed and Duplex\n"); ret_val = e1000_phy_force_speed_duplex(hw); if (ret_val) { - hw_dbg(hw, "Error Forcing Speed and Duplex\n"); + e_dbg("Error Forcing Speed and Duplex\n"); return ret_val; } } @@ -1195,11 +1195,11 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) return ret_val; if (link) { - hw_dbg(hw, "Valid link established!!!\n"); + e_dbg("Valid link established!!!\n"); e1000e_config_collision_dist(hw); ret_val = e1000e_config_fc_after_link_up(hw); } else { - hw_dbg(hw, "Unable to establish link!!!\n"); + e_dbg("Unable to establish link!!!\n"); } return ret_val; @@ -1245,12 +1245,12 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "IGP PSCR: %X\n", phy_data); + e_dbg("IGP PSCR: %X\n", phy_data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n"); + e_dbg("Waiting for forced speed/duplex link on IGP phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -1260,7 +1260,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) return ret_val; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + e_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = e1000e_phy_has_link_generic(hw, @@ -1304,7 +1304,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data); + e_dbg("M88E1000 PSCR: %X\n", phy_data); ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); if (ret_val) @@ -1322,7 +1322,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) return ret_val; if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n"); + e_dbg("Waiting for forced speed/duplex link on M88 phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, 100000, &link); @@ -1413,11 +1413,11 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { ctrl &= ~E1000_CTRL_FD; *phy_ctrl &= ~MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Half Duplex\n"); + e_dbg("Half Duplex\n"); } else { ctrl |= E1000_CTRL_FD; *phy_ctrl |= MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Full Duplex\n"); + e_dbg("Full Duplex\n"); } /* Forcing 10mb or 100mb? */ @@ -1425,12 +1425,12 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) ctrl |= E1000_CTRL_SPD_100; *phy_ctrl |= MII_CR_SPEED_100; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); - hw_dbg(hw, "Forcing 100mb\n"); + e_dbg("Forcing 100mb\n"); } else { ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); *phy_ctrl |= MII_CR_SPEED_10; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); - hw_dbg(hw, "Forcing 10mb\n"); + e_dbg("Forcing 10mb\n"); } e1000e_config_collision_dist(hw); @@ -1826,7 +1826,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) bool link; if (hw->phy.media_type != e1000_media_type_copper) { - hw_dbg(hw, "Phy info is only valid for copper media\n"); + e_dbg("Phy info is only valid for copper media\n"); return -E1000_ERR_CONFIG; } @@ -1835,7 +1835,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) return ret_val; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); return -E1000_ERR_CONFIG; } @@ -1903,7 +1903,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) return ret_val; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); return -E1000_ERR_CONFIG; } @@ -2031,7 +2031,7 @@ s32 e1000e_get_cfg_done(struct e1000_hw *hw) **/ s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw) { - hw_dbg(hw, "Running IGP 3 PHY init script\n"); + e_dbg("Running IGP 3 PHY init script\n"); /* PHY init IGP 3 */ /* Enable rise/fall, 10-mode work in class-A */ @@ -2474,7 +2474,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, /* Gig must be disabled for MDIO accesses to page 800 */ if ((hw->mac.type == e1000_pchlan) && (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE))) - hw_dbg(hw, "Attempting to access page 800 while gig enabled\n"); + e_dbg("Attempting to access page 800 while gig enabled\n"); /* All operations in this function are phy address 1 */ hw->phy.addr = 1; @@ -2884,7 +2884,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, /* masking with 0x3F to remove the page from offset */ ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F); if (ret_val) { - hw_dbg(hw, "Could not write PHY the HV address register\n"); + e_dbg("Could not write PHY the HV address register\n"); goto out; } @@ -2895,7 +2895,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data); if (ret_val) { - hw_dbg(hw, "Could not read data value from HV data register\n"); + e_dbg("Could not read data value from HV data register\n"); goto out; } @@ -3021,12 +3021,12 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) if (ret_val) goto out; - hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data); + e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n"); + e_dbg("Waiting for forced speed/duplex link on 82577 phy\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -3036,7 +3036,7 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) goto out; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + e_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = e1000e_phy_has_link_generic(hw, @@ -3072,7 +3072,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) goto out; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); ret_val = -E1000_ERR_CONFIG; goto out; } |