aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/fsl_pq_mdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/fsl_pq_mdio.c')
-rw-r--r--drivers/net/fsl_pq_mdio.c468
1 files changed, 468 insertions, 0 deletions
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
new file mode 100644
index 00000000000..b3079a5a7f2
--- /dev/null
+++ b/drivers/net/fsl_pq_mdio.c
@@ -0,0 +1,468 @@
+/*
+ * Freescale PowerQUICC Ethernet Driver -- MIIM bus implementation
+ * Provides Bus interface for MIIM regs
+ *
+ * Author: Andy Fleming <afleming@freescale.com>
+ *
+ * Copyright (c) 2002-2004,2008 Freescale Semiconductor, Inc.
+ *
+ * Based on gianfar_mii.c and ucc_geth_mii.c (Li Yang, Kim Phillips)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/ucc.h>
+
+#include "gianfar.h"
+#include "fsl_pq_mdio.h"
+
+/*
+ * Write value to the PHY at mii_id at register regnum,
+ * on the bus attached to the local interface, which may be different from the
+ * generic mdio bus (tied to a single interface), waiting until the write is
+ * done before returning. This is helpful in programming interfaces like
+ * the TBI which control interfaces like onchip SERDES and are always tied to
+ * the local mdio pins, which may not be the same as system mdio bus, used for
+ * controlling the external PHYs, for example.
+ */
+int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
+ int regnum, u16 value)
+{
+ /* Set the PHY address and the register address we want to write */
+ out_be32(&regs->miimadd, (mii_id << 8) | regnum);
+
+ /* Write out the value we want */
+ out_be32(&regs->miimcon, value);
+
+ /* Wait for the transaction to finish */
+ while (in_be32(&regs->miimind) & MIIMIND_BUSY)
+ cpu_relax();
+
+ return 0;
+}
+
+/*
+ * Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value. Clears miimcom first. All PHY operation
+ * done on the bus attached to the local interface,
+ * which may be different from the generic mdio bus
+ * This is helpful in programming interfaces like
+ * the TBI which, in turn, control interfaces like onchip SERDES
+ * and are always tied to the local mdio pins, which may not be the
+ * same as system mdio bus, used for controlling the external PHYs, for eg.
+ */
+int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs,
+ int mii_id, int regnum)
+{
+ u16 value;
+
+ /* Set the PHY address and the register address we want to read */
+ out_be32(&regs->miimadd, (mii_id << 8) | regnum);
+
+ /* Clear miimcom, and then initiate a read */
+ out_be32(&regs->miimcom, 0);
+ out_be32(&regs->miimcom, MII_READ_COMMAND);
+
+ /* Wait for the transaction to finish */
+ while (in_be32(&regs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
+ cpu_relax();
+
+ /* Grab the value of the register from miimstat */
+ value = in_be32(&regs->miimstat);
+
+ return value;
+}
+
+/*
+ * Write value to the PHY at mii_id at register regnum,
+ * on the bus, waiting until the write is done before returning.
+ */
+int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
+{
+ struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv;
+
+ /* Write to the local MII regs */
+ return(fsl_pq_local_mdio_write(regs, mii_id, regnum, value));
+}
+
+/*
+ * Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value. Clears miimcom first.
+ */
+int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv;
+
+ /* Read the local MII regs */
+ return(fsl_pq_local_mdio_read(regs, mii_id, regnum));
+}
+
+/* Reset the MIIM registers, and wait for the bus to free */
+static int fsl_pq_mdio_reset(struct mii_bus *bus)
+{
+ struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv;
+ int timeout = PHY_INIT_TIMEOUT;
+
+ mutex_lock(&bus->mdio_lock);
+
+ /* Reset the management interface */
+ out_be32(&regs->miimcfg, MIIMCFG_RESET);
+
+ /* Setup the MII Mgmt clock speed */
+ out_be32(&regs->miimcfg, MIIMCFG_INIT_VALUE);
+
+ /* Wait until the bus is free */
+ while ((in_be32(&regs->miimind) & MIIMIND_BUSY) && timeout--)
+ cpu_relax();
+
+ mutex_unlock(&bus->mdio_lock);
+
+ if (timeout < 0) {
+ printk(KERN_ERR "%s: The MII Bus is stuck!\n",
+ bus->name);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+/* Allocate an array which provides irq #s for each PHY on the given bus */
+static int *create_irq_map(struct device_node *np)
+{
+ int *irqs;
+ int i;
+ struct device_node *child = NULL;
+
+ irqs = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
+
+ if (!irqs)
+ return NULL;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ irqs[i] = PHY_POLL;
+
+ while ((child = of_get_next_child(np, child)) != NULL) {
+ int irq = irq_of_parse_and_map(child, 0);
+ const u32 *id;
+
+ if (irq == NO_IRQ)
+ continue;
+
+ id = of_get_property(child, "reg", NULL);
+
+ if (!id)
+ continue;
+
+ if (*id < PHY_MAX_ADDR && *id >= 0)
+ irqs[*id] = irq;
+ else
+ printk(KERN_WARNING "%s: "
+ "%d is not a valid PHY address\n",
+ np->full_name, *id);
+ }
+
+ return irqs;
+}
+
+void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
+{
+ const u32 *addr;
+ u64 taddr = OF_BAD_ADDR;
+
+ addr = of_get_address(np, 0, NULL, NULL);
+ if (addr)
+ taddr = of_translate_address(np, addr);
+
+ snprintf(name, MII_BUS_ID_SIZE, "%s@%llx", np->name,
+ (unsigned long long)taddr);
+}
+
+/* Scan the bus in reverse, looking for an empty spot */
+static int fsl_pq_mdio_find_free(struct mii_bus *new_bus)
+{
+ int i;
+
+ for (i = PHY_MAX_ADDR; i > 0; i--) {
+ u32 phy_id;
+
+ if (get_phy_id(new_bus, i, &phy_id))
+ return -1;
+
+ if (phy_id == 0xffffffff)
+ break;
+ }
+
+ return i;
+}
+
+
+#ifdef CONFIG_GIANFAR
+static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs)
+{
+ struct gfar __iomem *enet_regs;
+
+ /*
+ * This is mildly evil, but so is our hardware for doing this.
+ * Also, we have to cast back to struct gfar because of
+ * definition weirdness done in gianfar.h.
+ */
+ enet_regs = (struct gfar __iomem *)
+ ((char __iomem *)regs - offsetof(struct gfar, gfar_mii_regs));
+
+ return &enet_regs->tbipa;
+}
+#endif
+
+
+#ifdef CONFIG_UCC_GETH
+static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
+{
+ struct device_node *np = NULL;
+ int err = 0;
+
+ for_each_compatible_node(np, NULL, "ucc_geth") {
+ struct resource tempres;
+
+ err = of_address_to_resource(np, 0, &tempres);
+ if (err)
+ continue;
+
+ /* if our mdio regs fall within this UCC regs range */
+ if ((start >= tempres.start) && (end <= tempres.end)) {
+ /* Find the id of the UCC */
+ const u32 *id;
+
+ id = of_get_property(np, "cell-index", NULL);
+ if (!id) {
+ id = of_get_property(np, "device-id", NULL);
+ if (!id)
+ continue;
+ }
+
+ *ucc_id = *id;
+
+ return 0;
+ }
+ }
+
+ if (err)
+ return err;
+ else
+ return -EINVAL;
+}
+#endif
+
+
+static int fsl_pq_mdio_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct device_node *np = ofdev->node;
+ struct device_node *tbi;
+ struct fsl_pq_mdio __iomem *regs;
+ u32 __iomem *tbipa;
+ struct mii_bus *new_bus;
+ int tbiaddr = -1;
+ u64 addr, size;
+ int err = 0;
+
+ new_bus = mdiobus_alloc();
+ if (NULL == new_bus)
+ return -ENOMEM;
+
+ new_bus->name = "Freescale PowerQUICC MII Bus",
+ new_bus->read = &fsl_pq_mdio_read,
+ new_bus->write = &fsl_pq_mdio_write,
+ new_bus->reset = &fsl_pq_mdio_reset,
+ fsl_pq_mdio_bus_name(new_bus->id, np);
+
+ /* Set the PHY base address */
+ addr = of_translate_address(np, of_get_address(np, 0, &size, NULL));
+ regs = ioremap(addr, size);
+
+ if (NULL == regs) {
+ err = -ENOMEM;
+ goto err_free_bus;
+ }
+
+ new_bus->priv = (void __force *)regs;
+
+ new_bus->irq = create_irq_map(np);
+
+ if (NULL == new_bus->irq) {
+ err = -ENOMEM;
+ goto err_unmap_regs;
+ }
+
+ new_bus->parent = &ofdev->dev;
+ dev_set_drvdata(&ofdev->dev, new_bus);
+
+ if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
+ of_device_is_compatible(np, "fsl,gianfar-tbi") ||
+ of_device_is_compatible(np, "gianfar")) {
+#ifdef CONFIG_GIANFAR
+ tbipa = get_gfar_tbipa(regs);
+#else
+ err = -ENODEV;
+ goto err_free_irqs;
+#endif
+ } else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
+ of_device_is_compatible(np, "ucc_geth_phy")) {
+#ifdef CONFIG_UCC_GETH
+ u32 id;
+
+ tbipa = &regs->utbipar;
+
+ if ((err = get_ucc_id_for_range(addr, addr + size, &id)))
+ goto err_free_irqs;
+
+ ucc_set_qe_mux_mii_mng(id - 1);
+#else
+ err = -ENODEV;
+ goto err_free_irqs;
+#endif
+ } else {
+ err = -ENODEV;
+ goto err_free_irqs;
+ }
+
+ for_each_child_of_node(np, tbi) {
+ if (!strncmp(tbi->type, "tbi-phy", 8))
+ break;
+ }
+
+ if (tbi) {
+ const u32 *prop = of_get_property(tbi, "reg", NULL);
+
+ if (prop)
+ tbiaddr = *prop;
+ }
+
+ if (tbiaddr == -1) {
+ out_be32(tbipa, 0);
+
+ tbiaddr = fsl_pq_mdio_find_free(new_bus);
+ }
+
+ /*
+ * We define TBIPA at 0 to be illegal, opting to fail for boards that
+ * have PHYs at 1-31, rather than change tbipa and rescan.
+ */
+ if (tbiaddr == 0) {
+ err = -EBUSY;
+
+ goto err_free_irqs;
+ }
+
+ out_be32(tbipa, tbiaddr);
+
+ /*
+ * The TBIPHY-only buses will find PHYs at every address,
+ * so we mask them all but the TBI
+ */
+ if (!of_device_is_compatible(np, "fsl,gianfar-mdio"))
+ new_bus->phy_mask = ~(1 << tbiaddr);
+
+ err = mdiobus_register(new_bus);
+
+ if (err) {
+ printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
+ new_bus->name);
+ goto err_free_irqs;
+ }
+
+ return 0;
+
+err_free_irqs:
+ kfree(new_bus->irq);
+err_unmap_regs:
+ iounmap(regs);
+err_free_bus:
+ kfree(new_bus);
+
+ return err;
+}
+
+
+static int fsl_pq_mdio_remove(struct of_device *ofdev)
+{
+ struct device *device = &ofdev->dev;
+ struct mii_bus *bus = dev_get_drvdata(device);
+
+ mdiobus_unregister(bus);
+
+ dev_set_drvdata(device, NULL);
+
+ iounmap((void __iomem *)bus->priv);
+ bus->priv = NULL;
+ mdiobus_free(bus);
+
+ return 0;
+}
+
+static struct of_device_id fsl_pq_mdio_match[] = {
+ {
+ .type = "mdio",
+ .compatible = "ucc_geth_phy",
+ },
+ {
+ .type = "mdio",
+ .compatible = "gianfar",
+ },
+ {
+ .compatible = "fsl,ucc-mdio",
+ },
+ {
+ .compatible = "fsl,gianfar-tbi",
+ },
+ {
+ .compatible = "fsl,gianfar-mdio",
+ },
+ {},
+};
+
+static struct of_platform_driver fsl_pq_mdio_driver = {
+ .name = "fsl-pq_mdio",
+ .probe = fsl_pq_mdio_probe,
+ .remove = fsl_pq_mdio_remove,
+ .match_table = fsl_pq_mdio_match,
+};
+
+int __init fsl_pq_mdio_init(void)
+{
+ return of_register_platform_driver(&fsl_pq_mdio_driver);
+}
+
+void fsl_pq_mdio_exit(void)
+{
+ of_unregister_platform_driver(&fsl_pq_mdio_driver);
+}
+subsys_initcall_sync(fsl_pq_mdio_init);
+module_exit(fsl_pq_mdio_exit);