diff options
Diffstat (limited to 'drivers/net/igb')
| -rw-r--r-- | drivers/net/igb/e1000_82575.c | 11 | ||||
| -rw-r--r-- | drivers/net/igb/igb.h | 9 | ||||
| -rw-r--r-- | drivers/net/igb/igb_main.c | 24 |
3 files changed, 23 insertions, 21 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index f5e2e7235fc..13ca73f96ec 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -699,11 +699,18 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) /* SGMII link check is done through the PCS register. */ if ((hw->phy.media_type != e1000_media_type_copper) || - (igb_sgmii_active_82575(hw))) + (igb_sgmii_active_82575(hw))) { ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, &duplex); - else + /* + * Use this flag to determine if link needs to be checked or + * not. If we have link clear the flag so that we do not + * continue to check for link. + */ + hw->mac.get_link_status = !hw->mac.serdes_has_link; + } else { ret_val = igb_check_for_copper_link(hw); + } return ret_val; } diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index 5a27825cc48..aebef8e48e7 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -300,11 +300,10 @@ struct igb_adapter { #define IGB_FLAG_HAS_MSI (1 << 0) #define IGB_FLAG_MSI_ENABLE (1 << 1) -#define IGB_FLAG_HAS_DCA (1 << 2) -#define IGB_FLAG_DCA_ENABLED (1 << 3) -#define IGB_FLAG_IN_NETPOLL (1 << 5) -#define IGB_FLAG_QUAD_PORT_A (1 << 6) -#define IGB_FLAG_NEED_CTX_IDX (1 << 7) +#define IGB_FLAG_DCA_ENABLED (1 << 2) +#define IGB_FLAG_IN_NETPOLL (1 << 3) +#define IGB_FLAG_QUAD_PORT_A (1 << 4) +#define IGB_FLAG_NEED_CTX_IDX (1 << 5) enum e1000_state_t { __IGB_TESTING, diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index b82b0fb2056..a50db5398fa 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -206,10 +206,11 @@ static int __init igb_init_module(void) global_quad_port_a = 0; - ret = pci_register_driver(&igb_driver); #ifdef CONFIG_IGB_DCA dca_register_notify(&dca_notifier); #endif + + ret = pci_register_driver(&igb_driver); return ret; } @@ -1156,11 +1157,10 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* set flags */ switch (hw->mac.type) { - case e1000_82576: case e1000_82575: - adapter->flags |= IGB_FLAG_HAS_DCA; adapter->flags |= IGB_FLAG_NEED_CTX_IDX; break; + case e1000_82576: default: break; } @@ -1310,8 +1310,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, goto err_register; #ifdef CONFIG_IGB_DCA - if ((adapter->flags & IGB_FLAG_HAS_DCA) && - (dca_add_requester(&pdev->dev) == 0)) { + if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&pdev->dev, "DCA enabled\n"); /* Always use CB2 mode, difference is masked @@ -1835,11 +1834,11 @@ static void igb_setup_rctl(struct igb_adapter *adapter) rctl |= E1000_RCTL_SECRC; /* - * disable store bad packets, long packet enable, and clear size bits. + * disable store bad packets and clear size bits. */ - rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_LPE | E1000_RCTL_SZ_256); + rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); - if (adapter->netdev->mtu > ETH_DATA_LEN) + /* enable LPE when to prevent packets larger than max_frame_size */ rctl |= E1000_RCTL_LPE; /* Setup buffer sizes */ @@ -1865,7 +1864,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter) */ /* allocations using alloc_page take too long for regular MTU * so only enable packet split for jumbo frames */ - if (rctl & E1000_RCTL_LPE) { + if (adapter->netdev->mtu > ETH_DATA_LEN) { adapter->rx_ps_hdr_size = IGB_RXBUFFER_128; srrctl |= adapter->rx_ps_hdr_size << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; @@ -3473,19 +3472,16 @@ static int __igb_notify_dca(struct device *dev, void *data) struct e1000_hw *hw = &adapter->hw; unsigned long event = *(unsigned long *)data; - if (!(adapter->flags & IGB_FLAG_HAS_DCA)) - goto out; - switch (event) { case DCA_PROVIDER_ADD: /* if already enabled, don't do it again */ if (adapter->flags & IGB_FLAG_DCA_ENABLED) break; - adapter->flags |= IGB_FLAG_DCA_ENABLED; /* Always use CB2 mode, difference is masked * in the CB driver. */ wr32(E1000_DCA_CTRL, 2); if (dca_add_requester(dev) == 0) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&adapter->pdev->dev, "DCA enabled\n"); igb_setup_dca(adapter); break; @@ -3502,7 +3498,7 @@ static int __igb_notify_dca(struct device *dev, void *data) } break; } -out: + return 0; } |