diff options
Diffstat (limited to 'drivers/net/igb')
| -rw-r--r-- | drivers/net/igb/Makefile | 37 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_82575.c | 1269 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_82575.h | 150 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_defines.h | 772 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_hw.h | 599 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_mac.c | 1505 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_mac.h | 98 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_nvm.c | 605 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_nvm.h | 40 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_phy.c | 1807 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_phy.h | 98 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_regs.h | 270 | ||||
| -rw-r--r-- | drivers/net/igb/igb.h | 300 | ||||
| -rw-r--r-- | drivers/net/igb/igb_ethtool.c | 1927 | ||||
| -rw-r--r-- | drivers/net/igb/igb_main.c | 4138 |
15 files changed, 13615 insertions, 0 deletions
diff --git a/drivers/net/igb/Makefile b/drivers/net/igb/Makefile new file mode 100644 index 00000000000..1927b3fd6f0 --- /dev/null +++ b/drivers/net/igb/Makefile @@ -0,0 +1,37 @@ +################################################################################ +# +# Intel 82575 PCI-Express Ethernet Linux driver +# Copyright(c) 1999 - 2007 Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# +# The full GNU General Public License is included in this distribution in +# the file called "COPYING". +# +# Contact Information: +# Linux NICS <linux.nics@intel.com> +# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> +# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 +# +################################################################################ + +# +# Makefile for the Intel(R) 82575 PCI-Express ethernet driver +# + +obj-$(CONFIG_IGB) += igb.o + +igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \ + e1000_mac.o e1000_nvm.o e1000_phy.o + diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c new file mode 100644 index 00000000000..cda3ec87909 --- /dev/null +++ b/drivers/net/igb/e1000_82575.c @@ -0,0 +1,1269 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* e1000_82575 + * e1000_82576 + */ + +#include <linux/types.h> +#include <linux/slab.h> + +#include "e1000_mac.h" +#include "e1000_82575.h" + +static s32 igb_get_invariants_82575(struct e1000_hw *); +static s32 igb_acquire_phy_82575(struct e1000_hw *); +static void igb_release_phy_82575(struct e1000_hw *); +static s32 igb_acquire_nvm_82575(struct e1000_hw *); +static void igb_release_nvm_82575(struct e1000_hw *); +static s32 igb_check_for_link_82575(struct e1000_hw *); +static s32 igb_get_cfg_done_82575(struct e1000_hw *); +static s32 igb_init_hw_82575(struct e1000_hw *); +static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *); +static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *); +static void igb_rar_set_82575(struct e1000_hw *, u8 *, u32); +static s32 igb_reset_hw_82575(struct e1000_hw *); +static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool); +static s32 igb_setup_copper_link_82575(struct e1000_hw *); +static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *); +static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16); +static void igb_clear_hw_cntrs_82575(struct e1000_hw *); +static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16); +static s32 igb_configure_pcs_link_82575(struct e1000_hw *); +static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *, + u16 *); +static s32 igb_get_phy_id_82575(struct e1000_hw *); +static void igb_release_swfw_sync_82575(struct e1000_hw *, u16); +static bool igb_sgmii_active_82575(struct e1000_hw *); +static s32 igb_reset_init_script_82575(struct e1000_hw *); +static s32 igb_read_mac_addr_82575(struct e1000_hw *); + + +struct e1000_dev_spec_82575 { + bool sgmii_active; +}; + +static s32 igb_get_invariants_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + struct e1000_nvm_info *nvm = &hw->nvm; + struct e1000_mac_info *mac = &hw->mac; + struct e1000_dev_spec_82575 *dev_spec; + u32 eecd; + s32 ret_val; + u16 size; + u32 ctrl_ext = 0; + + switch (hw->device_id) { + case E1000_DEV_ID_82575EB_COPPER: + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82575GB_QUAD_COPPER: + mac->type = e1000_82575; + break; + default: + return -E1000_ERR_MAC_INIT; + break; + } + + /* MAC initialization */ + hw->dev_spec_size = sizeof(struct e1000_dev_spec_82575); + + /* Device-specific structure allocation */ + hw->dev_spec = kzalloc(hw->dev_spec_size, GFP_KERNEL); + + if (!hw->dev_spec) + return -ENOMEM; + + dev_spec = (struct e1000_dev_spec_82575 *)hw->dev_spec; + + /* Set media type */ + /* + * The 82575 uses bits 22:23 for link mode. The mode can be changed + * based on the EEPROM. We cannot rely upon device ID. There + * is no distinguishable difference between fiber and internal + * SerDes mode on the 82575. There can be an external PHY attached + * on the SGMII interface. For this, we'll set sgmii_active to true. + */ + phy->media_type = e1000_media_type_copper; + dev_spec->sgmii_active = false; + + ctrl_ext = rd32(E1000_CTRL_EXT); + if ((ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) == + E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES) { + hw->phy.media_type = e1000_media_type_internal_serdes; + ctrl_ext |= E1000_CTRL_I2C_ENA; + } else if (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII) { + dev_spec->sgmii_active = true; + ctrl_ext |= E1000_CTRL_I2C_ENA; + } else { + ctrl_ext &= ~E1000_CTRL_I2C_ENA; + } + wr32(E1000_CTRL_EXT, ctrl_ext); + + /* Set mta register count */ + mac->mta_reg_count = 128; + /* Set rar entry count */ + mac->rar_entry_count = E1000_RAR_ENTRIES_82575; + /* Set if part includes ASF firmware */ + mac->asf_firmware_present = true; + /* Set if manageability features are enabled. */ + mac->arc_subsystem_valid = + (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK) + ? true : false; + + /* physical interface link setup */ + mac->ops.setup_physical_interface = + (hw->phy.media_type == e1000_media_type_copper) + ? igb_setup_copper_link_82575 + : igb_setup_fiber_serdes_link_82575; + + /* NVM initialization */ + eecd = rd32(E1000_EECD); + + nvm->opcode_bits = 8; + nvm->delay_usec = 1; + switch (nvm->override) { + case e1000_nvm_override_spi_large: + nvm->page_size = 32; + nvm->address_bits = 16; + break; + case e1000_nvm_override_spi_small: + nvm->page_size = 8; + nvm->address_bits = 8; + break; + default: + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8; + break; + } + + nvm->type = e1000_nvm_eeprom_spi; + + size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> + E1000_EECD_SIZE_EX_SHIFT); + + /* + * Added to a constant, "size" becomes the left-shift value + * for setting word_size. + */ + size += NVM_WORD_SIZE_BASE_SHIFT; + nvm->word_size = 1 << size; + + /* setup PHY parameters */ + if (phy->media_type != e1000_media_type_copper) { + phy->type = e1000_phy_none; + return 0; + } + + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; + + /* PHY function pointers */ + if (igb_sgmii_active_82575(hw)) { + phy->ops.reset_phy = igb_phy_hw_reset_sgmii_82575; + phy->ops.read_phy_reg = igb_read_phy_reg_sgmii_82575; + phy->ops.write_phy_reg = igb_write_phy_reg_sgmii_82575; + } else { + phy->ops.reset_phy = igb_phy_hw_reset; + phy->ops.read_phy_reg = igb_read_phy_reg_igp; + phy->ops.write_phy_reg = igb_write_phy_reg_igp; + } + + /* Set phy->phy_addr and phy->id. */ + ret_val = igb_get_phy_id_82575(hw); + if (ret_val) + return ret_val; + + /* Verify phy id and set remaining function pointers */ + switch (phy->id) { + case M88E1111_I_PHY_ID: + phy->type = e1000_phy_m88; + phy->ops.get_phy_info = igb_get_phy_info_m88; + phy->ops.get_cable_length = igb_get_cable_length_m88; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; + break; + case IGP03E1000_E_PHY_ID: + phy->type = e1000_phy_igp_3; + phy->ops.get_phy_info = igb_get_phy_info_igp; + phy->ops.get_cable_length = igb_get_cable_length_igp_2; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state; + break; + default: + return -E1000_ERR_PHY; + } + + return 0; +} + +/** + * e1000_acquire_phy_82575 - Acquire rights to access PHY + * @hw: pointer to the HW structure + * + * Acquire access rights to the correct PHY. This is a + * function pointer entry point called by the api module. + **/ +static s32 igb_acquire_phy_82575(struct e1000_hw *hw) +{ + u16 mask; + + mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM; + + return igb_acquire_swfw_sync_82575(hw, mask); +} + +/** + * e1000_release_phy_82575 - Release rights to access PHY + * @hw: pointer to the HW structure + * + * A wrapper to release access rights to the correct PHY. This is a + * function pointer entry point called by the api module. + **/ +static void igb_release_phy_82575(struct e1000_hw *hw) +{ + u16 mask; + + mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM; + igb_release_swfw_sync_82575(hw, mask); +} + +/** + * e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the serial gigabit media independent + * interface and stores the retrieved information in data. + **/ +static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, + u16 *data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, i2ccmd = 0; + + if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { + hw_dbg(hw, "PHY Address %u is out of range\n", offset); + return -E1000_ERR_PARAM; + } + + /* + * Set up Op-code, Phy Address, and register address in the I2CCMD + * register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + (E1000_I2CCMD_OPCODE_READ)); + + wr32(E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + udelay(50); + i2ccmd = rd32(E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) + break; + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + hw_dbg(hw, "I2CCMD Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + hw_dbg(hw, "I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + + /* Need to byte-swap the 16-bit value. */ + *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00); + + return 0; +} + +/** + * e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset using the serial gigabit + * media independent interface. + **/ +static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, + u16 data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, i2ccmd = 0; + u16 phy_data_swapped; + + if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { + hw_dbg(hw, "PHY Address %d is out of range\n", offset); + return -E1000_ERR_PARAM; + } + + /* Swap the data bytes for the I2C interface */ + phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00); + + /* + * Set up Op-code, Phy Address, and register address in the I2CCMD + * register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | + phy_data_swapped); + + wr32(E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + udelay(50); + i2ccmd = rd32(E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) + break; + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + hw_dbg(hw, "I2CCMD Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + hw_dbg(hw, "I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + + return 0; +} + +/** + * e1000_get_phy_id_82575 - Retreive PHY addr and id + * @hw: pointer to the HW structure + * + * Retreives the PHY address and ID for both PHY's which do and do not use + * sgmi interface. + **/ +static s32 igb_get_phy_id_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 phy_id; + + /* + * For SGMII PHYs, we try the list of possible addresses until + * we find one that works. For non-SGMII PHYs + * (e.g. integrated copper PHYs), an address of 1 should + * work. The result of this function should mean phy->phy_addr + * and phy->id are set correctly. + */ + if (!(igb_sgmii_active_82575(hw))) { + phy->addr = 1; + ret_val = igb_get_phy_id(hw); + goto out; + } + + /* + * The address field in the I2CCMD register is 3 bits and 0 is invalid. + * Therefore, we need to test 1-7 + */ + for (phy->addr = 1; phy->addr < 8; phy->addr++) { + ret_val = igb_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id); + if (ret_val == 0) { + hw_dbg(hw, "Vendor ID 0x%08X read at address %u\n", + phy_id, + phy->addr); + /* + * At the time of this writing, The M88 part is + * the only supported SGMII PHY product. + */ + if (phy_id == M88_VENDOR) + break; + } else { + hw_dbg(hw, "PHY address %u was unreadable\n", + phy->addr); + } + } + + /* A valid PHY type couldn't be found. */ + if (phy->addr == 8) { + phy->addr = 0; + ret_val = -E1000_ERR_PHY; + goto out; + } + + ret_val = igb_get_phy_id(hw); + +out: + return ret_val; +} + +/** + * e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset + * @hw: pointer to the HW structure + * + * Resets the PHY using the serial gigabit media independent interface. + **/ +static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) +{ + s32 ret_val; + + /* + * This isn't a true "hard" reset, but is the only reset + * available to us at this time. + */ + + hw_dbg(hw, "Soft resetting SGMII attached PHY...\n"); + + /* + * SFP documentation requires the following to configure the SPF module + * to work on SGMII. No further documentation is given. + */ + ret_val = hw->phy.ops.write_phy_reg(hw, 0x1B, 0x8084); + if (ret_val) + goto out; + + ret_val = igb_phy_sw_reset(hw); + +out: + return ret_val; +} + +/** + * e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU D0 state according to the active flag. When + * activating LPLU this function also disables smart speed + * and vice versa. LPLU will not be activated unless the + * device autonegotiation advertisement meets standards of + * either 10 or 10/100 or 10/100/1000 at all duplexes. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + ret_val = hw->phy.ops.read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + &data); + if (ret_val) + goto out; + + if (active) { + data |= IGP02E1000_PM_D0_LPLU; + ret_val = hw->phy.ops.write_phy_reg(hw, + IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + goto out; + + /* When LPLU is enabled, we should disable SmartSpeed */ + ret_val = hw->phy.ops.read_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = hw->phy.ops.write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } else { + data &= ~IGP02E1000_PM_D0_LPLU; + ret_val = hw->phy.ops.write_phy_reg(hw, + IGP02E1000_PHY_POWER_MGMT, + data); + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) { + ret_val = hw->phy.ops.read_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = hw->phy.ops.write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } else if (phy->smart_speed == e1000_smart_speed_off) { + ret_val = hw->phy.ops.read_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = hw->phy.ops.write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } + } + +out: + return ret_val; +} + +/** + * e1000_acquire_nvm_82575 - Request for access to EEPROM + * @hw: pointer to the HW structure + * + * Acquire the necessary semaphores for exclussive access to the EEPROM. + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -E1000_ERR_NVM (-1). + **/ +static s32 igb_acquire_nvm_82575(struct e1000_hw *hw) +{ + s32 ret_val; + + ret_val = igb_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); + if (ret_val) + goto out; + + ret_val = igb_acquire_nvm(hw); + + if (ret_val) + igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); + +out: + return ret_val; +} + +/** + * e1000_release_nvm_82575 - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit, + * then release the semaphores acquired. + **/ +static void igb_release_nvm_82575(struct e1000_hw *hw) +{ + igb_release_nvm(hw); + igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); +} + +/** + * e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Acquire the SW/FW semaphore to access the PHY or NVM. The mask + * will also specify which port we're acquiring the lock for. + **/ +static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + u32 fwmask = mask << 16; + s32 ret_val = 0; + s32 i = 0, timeout = 200; /* FIXME: find real value to use here */ + + while (i < timeout) { + if (igb_get_hw_semaphore(hw)) { + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync = rd32(E1000_SW_FW_SYNC); + if (!(swfw_sync & (fwmask | swmask))) + break; + + /* + * Firmware currently using resource (fwmask) + * or other software thread using resource (swmask) + */ + igb_put_hw_semaphore(hw); + mdelay(5); + i++; + } + + if (i == timeout) { + hw_dbg(hw, "Can't access resource, SW_FW_SYNC timeout.\n"); + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync |= swmask; + wr32(E1000_SW_FW_SYNC, swfw_sync); + + igb_put_hw_semaphore(hw); + +out: + return ret_val; +} + +/** + * e1000_release_swfw_sync_82575 - Release SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Release the SW/FW semaphore used to access the PHY or NVM. The mask + * will also specify which port we're releasing the lock for. + **/ +static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + + while (igb_get_hw_semaphore(hw) != 0); + /* Empty */ + + swfw_sync = rd32(E1000_SW_FW_SYNC); + swfw_sync &= ~mask; + wr32(E1000_SW_FW_SYNC, swfw_sync); + + igb_put_hw_semaphore(hw); +} + +/** + * e1000_get_cfg_done_82575 - Read config done bit + * @hw: pointer to the HW structure + * + * Read the management control register for the config done bit for + * completion status. NOTE: silicon which is EEPROM-less will fail trying + * to read the config done bit, so an error is *ONLY* logged and returns + * 0. If we were to return with error, EEPROM-less silicon + * would not be able to be reset or change link. + **/ +static s32 igb_get_cfg_done_82575(struct e1000_hw *hw) +{ + s32 timeout = PHY_CFG_TIMEOUT; + s32 ret_val = 0; + u32 mask = E1000_NVM_CFG_DONE_PORT_0; + + if (hw->bus.func == 1) + mask = E1000_NVM_CFG_DONE_PORT_1; + + while (timeout) { + if (rd32(E1000_EEMNGCTL) & mask) + break; + msleep(1); + timeout--; + } + if (!timeout) + hw_dbg(hw, "MNG configuration cycle has not completed.\n"); + + /* If EEPROM is not marked present, init the PHY manually */ + if (((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) && + (hw->phy.type == e1000_phy_igp_3)) + igb_phy_init_script_igp3(hw); + + return ret_val; +} + +/** + * e1000_check_for_link_82575 - Check for link + * @hw: pointer to the HW structure + * + * If sgmii is enabled, then use the pcs register to determine link, otherwise + * use the generic interface for determining link. + **/ +static s32 igb_check_for_link_82575(struct e1000_hw *hw) +{ + s32 ret_val; + u16 speed, duplex; + + /* SGMII link check is done through the PCS register. */ + if ((hw->phy.media_type != e1000_media_type_copper) || + (igb_sgmii_active_82575(hw))) + ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, + &duplex); + else + ret_val = igb_check_for_copper_link(hw); + + return ret_val; +} + +/** + * e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Using the physical coding sub-layer (PCS), retreive the current speed and + * duplex, then store the values in the pointers provided. + **/ +static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 pcs; + + /* Set up defaults for the return values of this function */ + mac->serdes_has_link = false; + *speed = 0; + *duplex = 0; + + /* + * Read the PCS Status register for link state. For non-copper mode, + * the status register is not accurate. The PCS status register is + * used instead. + */ + pcs = rd32(E1000_PCS_LSTAT); + + /* + * The link up bit determines when link is up on autoneg. The sync ok + * gets set once both sides sync up and agree upon link. Stable link + * can be determined by checking for both link up and link sync ok + */ + if ((pcs & E1000_PCS_LSTS_LINK_OK) && (pcs & E1000_PCS_LSTS_SYNK_OK)) { + mac->serdes_has_link = true; + + /* Detect and store PCS speed */ + if (pcs & E1000_PCS_LSTS_SPEED_1000) { + *speed = SPEED_1000; + } else if (pcs & E1000_PCS_LSTS_SPEED_100) { + *speed = SPEED_100; + } else { + *speed = SPEED_10; + } + + /* Detect and store PCS duplex */ + if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) { + *duplex = FULL_DUPLEX; + } else { + *duplex = HALF_DUPLEX; + } + } + + return 0; +} + +/** + * e1000_rar_set_82575 - Set receive address register + * @hw: pointer to the HW structure + * @addr: pointer to the receive address + * @index: receive address array register + * + * Sets the receive address array register at index to the address passed + * in by addr. + **/ +static void igb_rar_set_82575(struct e1000_hw *hw, u8 *addr, u32 index) +{ + if (index < E1000_RAR_ENTRIES_82575) + igb_rar_set(hw, addr, index); + + return; +} + +/** + * e1000_reset_hw_82575 - Reset hardware + * @hw: pointer to the HW structure + * + * This resets the hardware into a known state. This is a + * function pointer entry point called by the api module. + **/ +static s32 igb_reset_hw_82575(struct e1000_hw *hw) +{ + u32 ctrl, icr; + s32 ret_val; + + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + ret_val = igb_disable_pcie_master(hw); + if (ret_val) + hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + + hw_dbg(hw, "Masking off all interrupts\n"); + wr32(E1000_IMC, 0xffffffff); + + wr32(E1000_RCTL, 0); + wr32(E1000_TCTL, E1000_TCTL_PSP); + wrfl(); + + msleep(10); + + ctrl = rd32(E1000_CTRL); + + hw_dbg(hw, "Issuing a global reset to MAC\n"); + wr32(E1000_CTRL, ctrl | E1000_CTRL_RST); + + ret_val = igb_get_auto_rd_done(hw); + if (ret_val) { + /* + * When auto config read does not complete, do not + * return with an error. This can happen in situations + * where there is no eeprom and prevents getting link. + */ + hw_dbg(hw, "Auto Read Done did not complete\n"); + } + + /* If EEPROM is not present, run manual init scripts */ + if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) + igb_reset_init_script_82575(hw); + + /* Clear any pending interrupt events. */ + wr32(E1000_IMC, 0xffffffff); + icr = rd32(E1000_ICR); + + igb_check_alt_mac_addr(hw); + + return ret_val; +} + +/** + * e1000_init_hw_82575 - Initialize hardware + * @hw: pointer to the HW structure + * + * This inits the hardware readying it for operation. + **/ +static s32 igb_init_hw_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + u16 i, rar_count = mac->rar_entry_count; + + /* Initialize identification LED */ + ret_val = igb_id_led_init(hw); + if (ret_val) { + hw_dbg(hw, "Error initializing identification LED\n"); + /* This is not fatal and we should not stop init due to this */ + } + + /* Disabling VLAN filtering */ + hw_dbg(hw, "Initializing the IEEE VLAN\n"); + igb_clear_vfta(hw); + + /* Setup the receive address */ + igb_init_rx_addrs(hw, rar_count); + /* Zero out the Multicast HASH table */ + hw_dbg(hw, "Zeroing the MTA\n"); + for (i = 0; i < mac->mta_reg_count; i++) + array_wr32(E1000_MTA, i, 0); + + /* Setup link and flow control */ + ret_val = igb_setup_link(hw); + + /* + * Clear all of the statistics registers (clear on read). It is + * important that we do this after we have tried to establish link + * because the symbol error count will increment wildly if there + * is no link. + */ + igb_clear_hw_cntrs_82575(hw); + + return ret_val; +} + +/** + * e1000_setup_copper_link_82575 - Configure copper link settings + * @hw: pointer to the HW structure + * + * Configures the link for auto-neg or forced speed and duplex. Then we check + * for link, once link is established calls to configure collision distance + * and flow control are called. + **/ +static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) +{ + u32 ctrl, led_ctrl; + s32 ret_val; + bool link; + + ctrl = rd32(E1000_CTRL); + ctrl |= E1000_CTRL_SLU; + ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + wr32(E1000_CTRL, ctrl); + + switch (hw->phy.type) { + case e1000_phy_m88: + ret_val = igb_copper_link_setup_m88(hw); + break; + case e1000_phy_igp_3: + ret_val = igb_copper_link_setup_igp(hw); + /* Setup activity LED */ + led_ctrl = rd32(E1000_LEDCTL); + led_ctrl &= IGP_ACTIVITY_LED_MASK; + led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); + wr32(E1000_LEDCTL, led_ctrl); + break; + default: + ret_val = -E1000_ERR_PHY; + break; + } + + if (ret_val) + goto out; + + if (hw->mac.autoneg) { + /* + * Setup autoneg and flow control advertisement + * and perform autonegotiation. + */ + ret_val = igb_copper_link_autoneg(hw); + if (ret_val) + goto out; + } else { + /* + * PHY will be set to 10H, 10F, 100H or 100F + * depending on user settings. + */ + hw_dbg(hw, "Forcing Speed and Duplex\n"); + ret_val = igb_phy_force_speed_duplex(hw); + if (ret_val) { + hw_dbg(hw, "Error Forcing Speed and Duplex\n"); + goto out; + } + } + + ret_val = igb_configure_pcs_link_82575(hw); + if (ret_val) + goto out; + + /* + * Check link status. Wait up to 100 microseconds for link to become + * valid. + */ + ret_val = igb_phy_has_link(hw, + COPPER_LINK_UP_LIMIT, + 10, + &link); + if (ret_val) + goto out; + + if (link) { + hw_dbg(hw, "Valid link established!!!\n"); + /* Config the MAC and PHY after link is up */ + igb_config_collision_dist(hw); + ret_val = igb_config_fc_after_link_up(hw); + } else { + hw_dbg(hw, "Unable to establish link!!!\n"); + } + +out: + return ret_val; +} + +/** + * e1000_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes + * @hw: pointer to the HW structure + * + * Configures speed and duplex for fiber and serdes links. + **/ +static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) +{ + u32 reg; + + /* + * On the 82575, SerDes loopback mode persists until it is + * explicitly turned off or a power cycle is performed. A read to + * the register does not indicate its status. Therefore, we ensure + * loopback mode is disabled during initialization. + */ + wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); + + /* Force link up, set 1gb, set both sw defined pins */ + reg = rd32(E1000_CTRL); + reg |= E1000_CTRL_SLU | + E1000_CTRL_SPD_1000 | + E1000_CTRL_FRCSPD | + E1000_CTRL_SWDPIN0 | + E1000_CTRL_SWDPIN1; + wr32(E1000_CTRL, reg); + + /* Set switch control to serdes energy detect */ + reg = rd32(E1000_CONNSW); + reg |= E1000_CONNSW_ENRGSRC; + wr32(E1000_CONNSW, reg); + + /* + * New SerDes mode allows for forcing speed or autonegotiating speed + * at 1gb. Autoneg should be default set by most drivers. This is the + * mode that will be compatible with older link partners and switches. + * However, both are supported by the hardware and some drivers/tools. + */ + reg = rd32(E1000_PCS_LCTL); + + reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | + E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); + + if (hw->mac.autoneg) { + /* Set PCS register for autoneg */ + reg |= E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ + E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ + E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ + E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ + hw_dbg(hw, "Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg); + } else { + /* Set PCS register for forced speed */ + reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */ + E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ + E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ + E1000_PCS_LCTL_FSD | /* Force Speed */ + E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ + hw_dbg(hw, "Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg); + } + wr32(E1000_PCS_LCTL, reg); + + return 0; +} + +/** + * e1000_configure_pcs_link_82575 - Configure PCS link + * @hw: pointer to the HW structure + * + * Configure the physical coding sub-layer (PCS) link. The PCS link is + * only used on copper connections where the serialized gigabit media + * independent interface (sgmii) is being used. Configures the link + * for auto-negotiation or forces speed/duplex. + **/ +static s32 igb_configure_pcs_link_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 reg = 0; + + if (hw->phy.media_type != e1000_media_type_copper || + !(igb_sgmii_active_82575(hw))) + goto out; + + /* For SGMII, we need to issue a PCS autoneg restart */ + reg = rd32(E1000_PCS_LCTL); + + /* AN time out should be disabled for SGMII mode */ + reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT); + + if (mac->autoneg) { + /* Make sure forced speed and force link are not set */ + reg &= ~(E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); + + /* + * The PHY should be setup prior to calling this function. + * All we need to do is restart autoneg and enable autoneg. + */ + reg |= E1000_PCS_LCTL_AN_RESTART | E1000_PCS_LCTL_AN_ENABLE; + } else { + /* Set PCS regiseter for forced speed */ + + /* Turn off bits for full duplex, speed, and autoneg */ + reg &= ~(E1000_PCS_LCTL_FSV_1000 | + E1000_PCS_LCTL_FSV_100 | + E1000_PCS_LCTL_FDV_FULL | + E1000_PCS_LCTL_AN_ENABLE); + + /* Check for duplex first */ + if (mac->forced_speed_duplex & E1000_ALL_FULL_DUPLEX) + reg |= E1000_PCS_LCTL_FDV_FULL; + + /* Now set speed */ + if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) + reg |= E1000_PCS_LCTL_FSV_100; + + /* Force speed and force link */ + reg |= E1000_PCS_LCTL_FSD | + E1000_PCS_LCTL_FORCE_LINK | + E1000_PCS_LCTL_FLV_LINK_UP; + + hw_dbg(hw, + "Wrote 0x%08X to PCS_LCTL to configure forced link\n", + reg); + } + wr32(E1000_PCS_LCTL, reg); + +out: + return 0; +} + +/** + * e1000_sgmii_active_82575 - Return sgmii state + * @hw: pointer to the HW structure + * + * 82575 silicon has a serialized gigabit media independent interface (sgmii) + * which can be enabled for use in the embedded applications. Simply + * return the current state of the sgmii interface. + **/ +static bool igb_sgmii_active_82575(struct e1000_hw *hw) +{ + struct e1000_dev_spec_82575 *dev_spec; + bool ret_val; + + if (hw->mac.type != e1000_82575) { + ret_val = false; + goto out; + } + + dev_spec = (struct e1000_dev_spec_82575 *)hw->dev_spec; + + ret_val = dev_spec->sgmii_active; + +out: + return ret_val; +} + +/** + * e1000_reset_init_script_82575 - Inits HW defaults after reset + * @hw: pointer to the HW structure + * + * Inits recommended HW defaults after a reset when there is no EEPROM + * detected. This is only for the 82575. + **/ +static s32 igb_reset_init_script_82575(struct e1000_hw *hw) +{ + if (hw->mac.type == e1000_82575) { + hw_dbg(hw, "Running reset init script for 82575\n"); + /* SerDes configuration via SERDESCTRL */ + igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x00, 0x0C); + igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x01, 0x78); + igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x1B, 0x23); + igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x23, 0x15); + + /* CCM configuration via CCMCTL register */ + igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x14, 0x00); + igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x10, 0x00); + + /* PCIe lanes configuration */ + igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x00, 0xEC); + igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x61, 0xDF); + igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x34, 0x05); + igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x2F, 0x81); + + /* PCIe PLL Configuration */ + igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x02, 0x47); + igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x14, 0x00); + igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x10, 0x00); + } + + return 0; +} + +/** + * e1000_read_mac_addr_82575 - Read device MAC address + * @hw: pointer to the HW structure + **/ +static s32 igb_read_mac_addr_82575(struct e1000_hw *hw) +{ + s32 ret_val = 0; + + if (igb_check_alt_mac_addr(hw)) + ret_val = igb_read_mac_addr(hw); + + return ret_val; +} + +/** + * e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters + * @hw: pointer to the HW structure + * + * Clears the hardware counters by reading the counter registers. + **/ +static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw) +{ + u32 temp; + + igb_clear_hw_cntrs_base(hw); + + temp = rd32(E1000_PRC64); + temp = rd32(E1000_PRC127); + temp = rd32(E1000_PRC255); + temp = rd32(E1000_PRC511); + temp = rd32(E1000_PRC1023); + temp = rd32(E1000_PRC1522); + temp = rd32(E1000_PTC64); + temp = rd32(E1000_PTC127); + temp = rd32(E1000_PTC255); + temp = rd32(E1000_PTC511); + temp = rd32(E1000_PTC1023); + temp = rd32(E1000_PTC1522); + + temp = rd32(E1000_ALGNERRC); + temp = rd32(E1000_RXERRC); + temp = rd32(E1000_TNCRS); + temp = rd32(E1000_CEXTERR); + temp = rd32(E1000_TSCTC); + temp = rd32(E1000_TSCTFC); + + temp = rd32(E1000_MGTPRC); + temp = rd32(E1000_MGTPDC); + temp = rd32(E1000_MGTPTC); + + temp = rd32(E1000_IAC); + temp = rd32(E1000_ICRXOC); + + temp = rd32(E1000_ICRXPTC); + temp = rd32(E1000_ICRXATC); + temp = rd32(E1000_ICTXPTC); + temp = rd32(E1000_ICTXATC); + temp = rd32(E1000_ICTXQEC); + temp = rd32(E1000_ICTXQMTC); + temp = rd32(E1000_ICRXDMTC); + + temp = rd32(E1000_CBTMPC); + temp = rd32(E1000_HTDPMC); + temp = rd32(E1000_CBRMPC); + temp = rd32(E1000_RPTHC); + temp = rd32(E1000_HGPTC); + temp = rd32(E1000_HTCBDPC); + temp = rd32(E1000_HGORCL); + temp = rd32(E1000_HGORCH); + temp = rd32(E1000_HGOTCL); + temp = rd32(E1000_HGOTCH); + temp = rd32(E1000_LENERRS); + + /* This register should not be read in copper configurations */ + if (hw->phy.media_type == e1000_media_type_internal_serdes) + temp = rd32(E1000_SCVPC); +} + +static struct e1000_mac_operations e1000_mac_ops_82575 = { + .reset_hw = igb_reset_hw_82575, + .init_hw = igb_init_hw_82575, + .check_for_link = igb_check_for_link_82575, + .rar_set = igb_rar_set_82575, + .read_mac_addr = igb_read_mac_addr_82575, + .get_speed_and_duplex = igb_get_speed_and_duplex_copper, +}; + +static struct e1000_phy_operations e1000_phy_ops_82575 = { + .acquire_phy = igb_acquire_phy_82575, + .get_cfg_done = igb_get_cfg_done_82575, + .release_phy = igb_release_phy_82575, +}; + +static struct e1000_nvm_operations e1000_nvm_ops_82575 = { + .acquire_nvm = igb_acquire_nvm_82575, + .read_nvm = igb_read_nvm_eerd, + .release_nvm = igb_release_nvm_82575, + .write_nvm = igb_write_nvm_spi, +}; + +const struct e1000_info e1000_82575_info = { + .get_invariants = igb_get_invariants_82575, + .mac_ops = &e1000_mac_ops_82575, + .phy_ops = &e1000_phy_ops_82575, + .nvm_ops = &e1000_nvm_ops_82575, +}; + diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h new file mode 100644 index 00000000000..6604d96bd56 --- /dev/null +++ b/drivers/net/igb/e1000_82575.h @@ -0,0 +1,150 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_82575_H_ +#define _E1000_82575_H_ + +#define E1000_RAR_ENTRIES_82575 16 + +/* SRRCTL bit definitions */ +#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ +#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */ +#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 + +#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002 +#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 +#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 +#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000 + +#define E1000_EICR_TX_QUEUE ( \ + E1000_EICR_TX_QUEUE0 | \ + E1000_EICR_TX_QUEUE1 | \ + E1000_EICR_TX_QUEUE2 | \ + E1000_EICR_TX_QUEUE3) + +#define E1000_EICR_RX_QUEUE ( \ + E1000_EICR_RX_QUEUE0 | \ + E1000_EICR_RX_QUEUE1 | \ + E1000_EICR_RX_QUEUE2 | \ + E1000_EICR_RX_QUEUE3) + +#define E1000_EIMS_RX_QUEUE E1000_EICR_RX_QUEUE +#define E1000_EIMS_TX_QUEUE E1000_EICR_TX_QUEUE + +/* Immediate Interrupt RX (A.K.A. Low Latency Interrupt) */ + +/* Receive Descriptor - Advanced */ +union e1000_adv_rx_desc { + struct { + u64 pkt_addr; /* Packet buffer address */ + u64 hdr_addr; /* Header buffer address */ + } read; + struct { + struct { + struct { + u16 pkt_info; /* RSS type, Packet type */ + u16 hdr_info; /* Split Header, + * header buffer length */ + } lo_dword; + union { + u32 rss; /* RSS Hash */ + struct { + u16 ip_id; /* IP id */ + u16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + u32 status_error; /* ext status/error */ + u16 length; /* Packet length */ + u16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0 +#define E1000_RXDADV_HDRBUFLEN_SHIFT 5 + +/* RSS Hash results */ + +/* RSS Packet Types as indicated in the receive descriptor */ + +/* Transmit Descriptor - Advanced */ +union e1000_adv_tx_desc { + struct { + u64 buffer_addr; /* Address of descriptor's data buf */ + u32 cmd_type_len; + u32 olinfo_status; + } read; + struct { + u64 rsvd; /* Reserved */ + u32 nxtseq_seed; + u32 status; + } wb; +}; + +/* Adv Transmit Descriptor Config Masks */ +#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ +#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ +#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */ +#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */ +#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ +#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ + +/* Context descriptors */ +struct e1000_adv_tx_context_desc { + u32 vlan_macip_lens; + u32 seqnum_seed; + u32 type_tucmd_mlhl; + u32 mss_l4len_idx; +}; + +#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ +#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ +/* IPSec Encrypt Enable for ESP */ +#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ +#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ +/* Adv ctxt IPSec SA IDX mask */ +/* Adv ctxt IPSec ESP len mask */ + +/* Additional Transmit Descriptor Control definitions */ +#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */ +/* Tx Queue Arbitration Priority 0=low, 1=high */ + +/* Additional Receive Descriptor Control definitions */ +#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */ + +/* Direct Cache Access (DCA) definitions */ + + + +#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* TX Desc writeback RO bit */ + +#endif diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h new file mode 100644 index 00000000000..8da9ffedc42 --- /dev/null +++ b/drivers/net/igb/e1000_defines.h @@ -0,0 +1,772 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_DEFINES_H_ +#define _E1000_DEFINES_H_ + +/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ +#define REQ_TX_DESCRIPTOR_MULTIPLE 8 +#define REQ_RX_DESCRIPTOR_MULTIPLE 8 + +/* Definitions for power management and wakeup registers */ +/* Wake Up Control */ +#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ + +/* Wake Up Filter Control */ +#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ +#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ +#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ +#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ +#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ +#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ +#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ +#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ +#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ +#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ + +/* Wake Up Status */ + +/* Wake Up Packet Length */ + +/* Four Flexible Filters are supported */ +#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4 + +/* Each Flexible Filter is at most 128 (0x80) bytes in length */ +#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128 + + +/* Extended Device Control */ +#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */ +#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */ +#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */ +#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ +#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */ +#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ +#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 +#define E1000_CTRL_EXT_EIAME 0x01000000 +#define E1000_CTRL_EXT_IRCA 0x00000001 +/* Interrupt delay cancellation */ +/* Driver loaded bit for FW */ +#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 +/* Interrupt acknowledge Auto-mask */ +/* Clear Interrupt timers after IMS clear */ +/* packet buffer parity error detection enabled */ +/* descriptor FIFO parity error detection enable */ +#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ +#define E1000_I2CCMD_REG_ADDR_SHIFT 16 +#define E1000_I2CCMD_PHY_ADDR_SHIFT 24 +#define E1000_I2CCMD_OPCODE_READ 0x08000000 +#define E1000_I2CCMD_OPCODE_WRITE 0x00000000 +#define E1000_I2CCMD_READY 0x20000000 +#define E1000_I2CCMD_ERROR 0x80000000 +#define E1000_MAX_SGMII_PHY_REG_ADDR 255 +#define E1000_I2CCMD_PHY_TIMEOUT 200 + +/* Receive Decriptor bit definitions */ +#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ +#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ +#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ +#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ +#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ +#define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ +#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ +#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ +#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ +#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ +#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ +#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ + +#define E1000_RXDEXT_STATERR_CE 0x01000000 +#define E1000_RXDEXT_STATERR_SE 0x02000000 +#define E1000_RXDEXT_STATERR_SEQ 0x04000000 +#define E1000_RXDEXT_STATERR_CXE 0x10000000 +#define E1000_RXDEXT_STATERR_TCPE 0x20000000 +#define E1000_RXDEXT_STATERR_IPE 0x40000000 +#define E1000_RXDEXT_STATERR_RXE 0x80000000 + +/* mask to determine if packets should be dropped due to frame errors */ +#define E1000_RXD_ERR_FRAME_ERR_MASK ( \ + E1000_RXD_ERR_CE | \ + E1000_RXD_ERR_SE | \ + E1000_RXD_ERR_SEQ | \ + E1000_RXD_ERR_CXE | \ + E1000_RXD_ERR_RXE) + +/* Same mask, but for extended and packet split descriptors */ +#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) + +#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 +#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 +#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 + + +/* Management Control */ +#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ +#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ +#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ +/* Enable Neighbor Discovery Filtering */ +#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ +#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ +/* Enable MAC address filtering */ +#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 +/* Enable MNG packets to host memory */ +#define E1000_MANC_EN_MNG2HOST 0x00200000 +/* Enable IP address filtering */ + + +/* Receive Control */ +#define E1000_RCTL_EN 0x00000002 /* enable */ +#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ +#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */ +#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */ +#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ +#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ +#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ +#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ +#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ +#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ +#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ +/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ +#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */ +#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */ +#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */ +#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */ +/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ +#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */ +#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */ +#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */ +#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ +#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ +#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ +#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ + +/* + * Use byte values for the following shift parameters + * Usage: + * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & + * E1000_PSRCTL_BSIZE0_MASK) | + * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & + * E1000_PSRCTL_BSIZE1_MASK) | + * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & + * E1000_PSRCTL_BSIZE2_MASK) | + * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; + * E1000_PSRCTL_BSIZE3_MASK)) + * where value0 = [128..16256], default=256 + * value1 = [1024..64512], default=4096 + * value2 = [0..64512], default=4096 + * value3 = [0..64512], default=0 + */ + +#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F +#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 +#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 +#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 + +#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ +#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ +#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ +#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ + +/* SWFW_SYNC Definitions */ +#define E1000_SWFW_EEP_SM 0x1 +#define E1000_SWFW_PHY0_SM 0x2 +#define E1000_SWFW_PHY1_SM 0x4 + +/* FACTPS Definitions */ +/* Device Control */ +#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ +#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ +#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ +#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ +#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ +#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ +#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ +#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ +#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ +#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +/* Defined polarity of Dock/Undock indication in SDP[0] */ +/* Reset both PHY ports, through PHYRST_N pin */ +/* enable link status from external LINK_0 and LINK_1 pins */ +#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ +#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ +#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ +#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ +#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ +#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */ +#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */ +#define E1000_CTRL_RST 0x04000000 /* Global reset */ +#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ +#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ +#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ +#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ +/* Initiate an interrupt to manageability engine */ +#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */ + +/* Bit definitions for the Management Data IO (MDIO) and Management Data + * Clock (MDC) pins in the Device Control Register. + */ + +#define E1000_CONNSW_ENRGSRC 0x4 +#define E1000_PCS_LCTL_FLV_LINK_UP 1 +#define E1000_PCS_LCTL_FSV_100 2 +#define E1000_PCS_LCTL_FSV_1000 4 +#define E1000_PCS_LCTL_FDV_FULL 8 +#define E1000_PCS_LCTL_FSD 0x10 +#define E1000_PCS_LCTL_FORCE_LINK 0x20 +#define E1000_PCS_LCTL_AN_ENABLE 0x10000 +#define E1000_PCS_LCTL_AN_RESTART 0x20000 +#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000 + +#define E1000_PCS_LSTS_LINK_OK 1 +#define E1000_PCS_LSTS_SPEED_100 2 +#define E1000_PCS_LSTS_SPEED_1000 4 +#define E1000_PCS_LSTS_DUPLEX_FULL 8 +#define E1000_PCS_LSTS_SYNK_OK 0x10 + +/* Device Status */ +#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ +#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ +#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ +#define E1000_STATUS_FUNC_SHIFT 2 +#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ +#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ +#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ +#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ +/* Change in Dock/Undock state. Clear on write '0'. */ +/* Status of Master requests. */ +#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 +/* BMC external code execution disabled */ + +/* Constants used to intrepret the masked PCI-X bus speed. */ + +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + + +#define ADVERTISE_10_HALF 0x0001 +#define ADVERTISE_10_FULL 0x0002 +#define ADVERTISE_100_HALF 0x0004 +#define ADVERTISE_100_FULL 0x0008 +#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */ +#define ADVERTISE_1000_FULL 0x0020 + +/* 1000/H is not supported, nor spec-compliant. */ +#define E1000_ALL_SPEED_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ + ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ + ADVERTISE_1000_FULL) +#define E1000_ALL_NOT_GIG (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ + ADVERTISE_100_HALF | ADVERTISE_100_FULL) +#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) +#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) +#define E1000_ALL_FULL_DUPLEX (ADVERTISE_10_FULL | ADVERTISE_100_FULL | \ + ADVERTISE_1000_FULL) +#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) + +#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX + +/* LED Control */ +#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F +#define E1000_LEDCTL_LED0_MODE_SHIFT 0 +#define E1000_LEDCTL_LED0_IVRT 0x00000040 +#define E1000_LEDCTL_LED0_BLINK 0x00000080 + +#define E1000_LEDCTL_MODE_LED_ON 0xE +#define E1000_LEDCTL_MODE_LED_OFF 0xF + +/* Transmit Descriptor bit definitions */ +#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ +#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ +#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ +#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ +#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ +/* Extended desc bits for Linksec and timesync */ + +/* Transmit Control */ +#define E1000_TCTL_EN 0x00000002 /* enable tx */ +#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ +#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ +#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ +#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ + +/* Transmit Arbitration Count */ + +/* SerDes Control */ +#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 + +/* Receive Checksum Control */ +#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ +#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ + +/* Header split receive */ + +/* Collision related configuration parameters */ +#define E1000_COLLISION_THRESHOLD 15 +#define E1000_CT_SHIFT 4 +#define E1000_COLLISION_DISTANCE 63 +#define E1000_COLD_SHIFT 12 + +/* Ethertype field values */ +#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ + +#define MAX_JUMBO_FRAME_SIZE 0x3F00 + +/* Extended Configuration Control and Size */ +#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040 + +/* PBA constants */ +#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ +#define E1000_PBA_24K 0x0018 +#define E1000_PBA_34K 0x0022 + +#define IFS_MAX 80 +#define IFS_MIN 40 +#define IFS_RATIO 4 +#define IFS_STEP 10 +#define MIN_NUM_XMITS 1000 + +/* SW Semaphore Register */ +#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ + +/* Interrupt Cause Read */ +#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ +#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ +#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ +#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */ +#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */ +#define E1000_ICR_RXO 0x00000040 /* rx overrun */ +#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ +#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ +#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */ +#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ +#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ +#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ +#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ +#define E1000_ICR_TXD_LOW 0x00008000 +#define E1000_ICR_SRPD 0x00010000 +#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ +#define E1000_ICR_MNG 0x00040000 /* Manageability event */ +#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ +/* If this bit asserted, the driver should claim the interrupt */ +#define E1000_ICR_INT_ASSERTED 0x80000000 +/* queue 0 Rx descriptor FIFO parity error */ +#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 +/* queue 0 Tx descriptor FIFO parity error */ +#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 +/* host arb read buffer parity error */ +#define E1000_ICR_HOST_ARB_PAR 0x00400000 +#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */ +/* queue 1 Rx descriptor FIFO parity error */ +#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 +/* queue 1 Tx descriptor FIFO parity error */ +#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 +/* FW changed the status of DISSW bit in the FWSM */ +#define E1000_ICR_DSW 0x00000020 +/* LAN connected device generates an interrupt */ +#define E1000_ICR_PHYINT 0x00001000 +#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */ + +/* Extended Interrupt Cause Read */ +#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */ +#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */ +#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */ +#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */ +#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */ +#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */ +#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */ +#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */ +#define E1000_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ +#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ +/* TCP Timer */ + +/* + * This defines the bits that are set in the Interrupt Mask + * Set/Read Register. Each bit is documented below: + * o RXT0 = Receiver Timer Interrupt (ring 0) + * o TXDW = Transmit Descriptor Written Back + * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) + * o RXSEQ = Receive Sequence Error + * o LSC = Link Status Change + */ +#define IMS_ENABLE_MASK ( \ + E1000_IMS_RXT0 | \ + E1000_IMS_TXDW | \ + E1000_IMS_RXDMT0 | \ + E1000_IMS_RXSEQ | \ + E1000_IMS_LSC) + +/* Interrupt Mask Set */ +#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ +#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ +#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ +#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ +/* queue 0 Rx descriptor FIFO parity error */ +/* queue 0 Tx descriptor FIFO parity error */ +/* host arb read buffer parity error */ +/* packet buffer parity error */ +/* queue 1 Rx descriptor FIFO parity error */ +/* queue 1 Tx descriptor FIFO parity error */ + +/* Extended Interrupt Mask Set */ +#define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ +#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ + +/* Interrupt Cause Set */ +#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ +/* queue 0 Rx descriptor FIFO parity error */ +/* queue 0 Tx descriptor FIFO parity error */ +/* host arb read buffer parity error */ +/* packet buffer parity error */ +/* queue 1 Rx descriptor FIFO parity error */ +/* queue 1 Tx descriptor FIFO parity error */ + +/* Extended Interrupt Cause Set */ + +/* Transmit Descriptor Control */ +/* Enable the counting of descriptors still to be processed. */ + +/* Flow Control Constants */ +#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 +#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 +#define FLOW_CONTROL_TYPE 0x8808 + +/* 802.1q VLAN Packet Size */ +#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ +#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ + +/* Receive Address */ +/* + * Number of high/low register pairs in the RAR. The RAR (Receive Address + * Registers) holds the directed and multicast addresses that we monitor. + * Technically, we have 16 spots. However, we reserve one of these spots + * (RAR[15]) for our directed address used by controllers with + * manageability enabled, allowing us room for 15 multicast addresses. + */ +#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ + +/* Error Codes */ +#define E1000_ERR_NVM 1 +#define E1000_ERR_PHY 2 +#define E1000_ERR_CONFIG 3 +#define E1000_ERR_PARAM 4 +#define E1000_ERR_MAC_INIT 5 +#define E1000_ERR_RESET 9 +#define E1000_ERR_MASTER_REQUESTS_PENDING 10 +#define E1000_ERR_HOST_INTERFACE_COMMAND 11 +#define E1000_BLK_PHY_RESET 12 +#define E1000_ERR_SWFW_SYNC 13 +#define E1000_NOT_IMPLEMENTED 14 + +/* Loop limit on how long we wait for auto-negotiation to complete */ +#define COPPER_LINK_UP_LIMIT 10 +#define PHY_AUTO_NEG_LIMIT 45 +#define PHY_FORCE_LIMIT 20 +/* Number of 100 microseconds we wait for PCI Express master disable */ +#define MASTER_DISABLE_TIMEOUT 800 +/* Number of milliseconds we wait for PHY configuration done after MAC reset */ +#define PHY_CFG_TIMEOUT 100 +/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */ +/* Number of milliseconds for NVM auto read done after MAC reset. */ +#define AUTO_READ_DONE_TIMEOUT 10 + +/* Flow Control */ +#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ + +/* Transmit Configuration Word */ +#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ + +/* Receive Configuration Word */ + +/* PCI Express Control */ +#define E1000_GCR_RXD_NO_SNOOP 0x00000001 +#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002 +#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004 +#define E1000_GCR_TXD_NO_SNOOP 0x00000008 +#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010 +#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020 + +#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \ + E1000_GCR_RXDSCW_NO_SNOOP | \ + E1000_GCR_RXDSCR_NO_SNOOP | \ + E1000_GCR_TXD_NO_SNOOP | \ + E1000_GCR_TXDSCW_NO_SNOOP | \ + E1000_GCR_TXDSCR_NO_SNOOP) + +/* PHY Control Register */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_1000 0x0040 +#define MII_CR_SPEED_100 0x2000 +#define MII_CR_SPEED_10 0x0000 + +/* PHY Status Register */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ + +/* Autoneg Advertisement Register */ +#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ +#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ + +/* Link Partner Ability Register (Base Page) */ +#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ +#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ + +/* Autoneg Expansion Register */ + +/* 1000BASE-T Control Register */ +#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ + /* 0=DTE device */ +#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ + /* 0=Configure PHY as Slave */ +#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ + /* 0=Automatic Master/Slave config */ + +/* 1000BASE-T Status Register */ +#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ + + +/* PHY 1000 MII Register/Bit Definitions */ +/* PHY Registers defined by IEEE */ +#define PHY_CONTROL 0x00 /* Control Register */ +#define PHY_STATUS 0x01 /* Status Regiser */ +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ +#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ +#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ + +/* NVM Control */ +#define E1000_EECD_SK 0x00000001 /* NVM Clock */ +#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ +#define E1000_EECD_DI 0x00000004 /* NVM Data In */ +#define E1000_EECD_DO 0x00000008 /* NVM Data Out */ +#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */ +#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */ +#define E1000_EECD_PRES 0x00000100 /* NVM Present */ +/* NVM Addressing bits based on type 0=small, 1=large */ +#define E1000_EECD_ADDR_BITS 0x00000400 +#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */ +#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ +#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ +#define E1000_EECD_SIZE_EX_SHIFT 11 + +/* Offset to data in NVM read/write registers */ +#define E1000_NVM_RW_REG_DATA 16 +#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ +#define E1000_NVM_RW_REG_START 1 /* Start operation */ +#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */ + +/* NVM Word Offsets */ +#define NVM_ID_LED_SETTINGS 0x0004 +/* For SERDES output amplitude adjustment. */ +#define NVM_INIT_CONTROL2_REG 0x000F +#define NVM_INIT_CONTROL3_PORT_A 0x0024 +#define NVM_ALT_MAC_ADDR_PTR 0x0037 +#define NVM_CHECKSUM_REG 0x003F + +#define E1000_NVM_CFG_DONE_PORT_0 0x40000 /* MNG config cycle done */ +#define E1000_NVM_CFG_DONE_PORT_1 0x80000 /* ...for second port */ + +/* Mask bits for fields in Word 0x0f of the NVM */ +#define NVM_WORD0F_PAUSE_MASK 0x3000 +#define NVM_WORD0F_ASM_DIR 0x2000 + +/* Mask bits for fields in Word 0x1a of the NVM */ + +/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */ +#define NVM_SUM 0xBABA + +#define NVM_PBA_OFFSET_0 8 +#define NVM_PBA_OFFSET_1 9 +#define NVM_WORD_SIZE_BASE_SHIFT 6 + +/* NVM Commands - Microwire */ + +/* NVM Commands - SPI */ +#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ +#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */ +#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ +#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */ +#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */ + +/* SPI NVM Status Register */ +#define NVM_STATUS_RDY_SPI 0x01 + +/* Word definitions for ID LED Settings */ +#define ID_LED_RESERVED_0000 0x0000 +#define ID_LED_RESERVED_FFFF 0xFFFF +#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ + (ID_LED_OFF1_OFF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_DEF1_DEF2)) +#define ID_LED_DEF1_DEF2 0x1 +#define ID_LED_DEF1_ON2 0x2 +#define ID_LED_DEF1_OFF2 0x3 +#define ID_LED_ON1_DEF2 0x4 +#define ID_LED_ON1_ON2 0x5 +#define ID_LED_ON1_OFF2 0x6 +#define ID_LED_OFF1_DEF2 0x7 +#define ID_LED_OFF1_ON2 0x8 +#define ID_LED_OFF1_OFF2 0x9 + +#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF +#define IGP_ACTIVITY_LED_ENABLE 0x0300 +#define IGP_LED3_MODE 0x07000000 + +/* PCI/PCI-X/PCI-EX Config space */ +#define PCI_HEADER_TYPE_REGISTER 0x0E +#define PCIE_LINK_STATUS 0x12 + +#define PCI_HEADER_TYPE_MULTIFUNC 0x80 +#define PCIE_LINK_WIDTH_MASK 0x3F0 +#define PCIE_LINK_WIDTH_SHIFT 4 + +#define PHY_REVISION_MASK 0xFFFFFFF0 +#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ +#define MAX_PHY_MULTI_PAGE_REG 0xF + +/* Bit definitions for valid PHY IDs. */ +/* + * I = Integrated + * E = External + */ +#define M88E1111_I_PHY_ID 0x01410CC0 +#define IGP03E1000_E_PHY_ID 0x02A80390 +#define M88_VENDOR 0x0141 + +/* M88E1000 Specific Registers */ +#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ +#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */ +#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */ + +#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */ +#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */ + +/* M88E1000 PHY Specific Control Register */ +#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ +/* 1=CLK125 low, 0=CLK125 toggling */ +#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ + /* Manual MDI configuration */ +#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ +/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ +#define M88E1000_PSCR_AUTO_X_1000T 0x0040 +/* Auto crossover enabled all speeds */ +#define M88E1000_PSCR_AUTO_X_MODE 0x0060 +/* + * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold + * 0=Normal 10BASE-T RX Threshold + */ +/* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */ +#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ + +/* M88E1000 PHY Specific Status Register */ +#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ +#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ +#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ +/* + * 0 = <50M + * 1 = 50-80M + * 2 = 80-110M + * 3 = 110-140M + * 4 = >140M + */ +#define M88E1000_PSSR_CABLE_LENGTH 0x0380 +#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ + +#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 + +/* M88E1000 Extended PHY Specific Control Register */ +/* + * 1 = Lost lock detect enabled. + * Will assert lost lock and bring + * link down if idle not seen + * within 1ms in 1000BASE-T + */ +/* + * Number of times we will attempt to autonegotiate before downshifting if we + * are the master + */ +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 +/* + * Number of times we will attempt to autonegotiate before downshifting if we + * are the slave + */ +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 +#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ + +/* M88EC018 Rev 2 specific DownShift settings */ +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 + +/* MDI Control */ +#define E1000_MDIC_REG_SHIFT 16 +#define E1000_MDIC_PHY_SHIFT 21 +#define E1000_MDIC_OP_WRITE 0x04000000 +#define E1000_MDIC_OP_READ 0x08000000 +#define E1000_MDIC_READY 0x10000000 +#define E1000_MDIC_ERROR 0x40000000 + +/* SerDes Control */ +#define E1000_GEN_CTL_READY 0x80000000 +#define E1000_GEN_CTL_ADDRESS_SHIFT 8 +#define E1000_GEN_POLL_TIMEOUT 640 + +#endif diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h new file mode 100644 index 00000000000..161fb68764a --- /dev/null +++ b/drivers/net/igb/e1000_hw.h @@ -0,0 +1,599 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_HW_H_ +#define _E1000_HW_H_ + +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include "e1000_mac.h" +#include "e1000_regs.h" +#include "e1000_defines.h" + +struct e1000_hw; + +#define E1000_DEV_ID_82575EB_COPPER 0x10A7 +#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 +#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 + +#define E1000_REVISION_2 2 +#define E1000_REVISION_4 4 + +#define E1000_FUNC_1 1 + +enum e1000_mac_type { + e1000_undefined = 0, + e1000_82575, + e1000_num_macs /* List is 1-based, so subtract 1 for true count. */ +}; + +enum e1000_media_type { + e1000_media_type_unknown = 0, + e1000_media_type_copper = 1, + e1000_media_type_fiber = 2, + e1000_media_type_internal_serdes = 3, + e1000_num_media_types +}; + +enum e1000_nvm_type { + e1000_nvm_unknown = 0, + e1000_nvm_none, + e1000_nvm_eeprom_spi, + e1000_nvm_eeprom_microwire, + e1000_nvm_flash_hw, + e1000_nvm_flash_sw +}; + +enum e1000_nvm_override { + e1000_nvm_override_none = 0, + e1000_nvm_override_spi_small, + e1000_nvm_override_spi_large, + e1000_nvm_override_microwire_small, + e1000_nvm_override_microwire_large +}; + +enum e1000_phy_type { + e1000_phy_unknown = 0, + e1000_phy_none, + e1000_phy_m88, + e1000_phy_igp, + e1000_phy_igp_2, + e1000_phy_gg82563, + e1000_phy_igp_3, + e1000_phy_ife, +}; + +enum e1000_bus_type { + e1000_bus_type_unknown = 0, + e1000_bus_type_pci, + e1000_bus_type_pcix, + e1000_bus_type_pci_express, + e1000_bus_type_reserved +}; + +enum e1000_bus_speed { + e1000_bus_speed_unknown = 0, + e1000_bus_speed_33, + e1000_bus_speed_66, + e1000_bus_speed_100, + e1000_bus_speed_120, + e1000_bus_speed_133, + e1000_bus_speed_2500, + e1000_bus_speed_5000, + e1000_bus_speed_reserved +}; + +enum e1000_bus_width { + e1000_bus_width_unknown = 0, + e1000_bus_width_pcie_x1, + e1000_bus_width_pcie_x2, + e1000_bus_width_pcie_x4 = 4, + e1000_bus_width_pcie_x8 = 8, + e1000_bus_width_32, + e1000_bus_width_64, + e1000_bus_width_reserved +}; + +enum e1000_1000t_rx_status { + e1000_1000t_rx_status_not_ok = 0, + e1000_1000t_rx_status_ok, + e1000_1000t_rx_status_undefined = 0xFF +}; + +enum e1000_rev_polarity { + e1000_rev_polarity_normal = 0, + e1000_rev_polarity_reversed, + e1000_rev_polarity_undefined = 0xFF +}; + +enum e1000_fc_type { + e1000_fc_none = 0, + e1000_fc_rx_pause, + e1000_fc_tx_pause, + e1000_fc_full, + e1000_fc_default = 0xFF +}; + + +/* Receive Descriptor */ +struct e1000_rx_desc { + u64 buffer_addr; /* Address of the descriptor's data buffer */ + u16 length; /* Length of data DMAed into data buffer */ + u16 csum; /* Packet checksum */ + u8 status; /* Descriptor status */ + u8 errors; /* Descriptor Errors */ + u16 special; +}; + +/* Receive Descriptor - Extended */ +union e1000_rx_desc_extended { + struct { + u64 buffer_addr; + u64 reserved; + } read; + struct { + struct { + u32 mrq; /* Multiple Rx Queues */ + union { + u32 rss; /* RSS Hash */ + struct { + u16 ip_id; /* IP id */ + u16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + u32 status_error; /* ext status/error */ + u16 length; + u16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define MAX_PS_BUFFERS 4 +/* Receive Descriptor - Packet Split */ +union e1000_rx_desc_packet_split { + struct { + /* one buffer for protocol header(s), three data buffers */ + u64 buffer_addr[MAX_PS_BUFFERS]; + } read; + struct { + struct { + u32 mrq; /* Multiple Rx Queues */ + union { + u32 rss; /* RSS Hash */ + struct { + u16 ip_id; /* IP id */ + u16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + u32 status_error; /* ext status/error */ + u16 length0; /* length of buffer 0 */ + u16 vlan; /* VLAN tag */ + } middle; + struct { + u16 header_status; + u16 length[3]; /* length of buffers 1-3 */ + } upper; + u64 reserved; + } wb; /* writeback */ +}; + +/* Transmit Descriptor */ +struct e1000_tx_desc { + u64 buffer_addr; /* Address of the descriptor's data buffer */ + union { + u32 data; + struct { + u16 length; /* Data buffer length */ + u8 cso; /* Checksum offset */ + u8 cmd; /* Descriptor control */ + } flags; + } lower; + union { + u32 data; + struct { + u8 status; /* Descriptor status */ + u8 css; /* Checksum start */ + u16 special; + } fields; + } upper; +}; + +/* Offload Context Descriptor */ +struct e1000_context_desc { + union { + u32 ip_config; + struct { + u8 ipcss; /* IP checksum start */ + u8 ipcso; /* IP checksum offset */ + u16 ipcse; /* IP checksum end */ + } ip_fields; + } lower_setup; + union { + u32 tcp_config; + struct { + u8 tucss; /* TCP checksum start */ + u8 tucso; /* TCP checksum offset */ + u16 tucse; /* TCP checksum end */ + } tcp_fields; + } upper_setup; + u32 cmd_and_length; + union { + u32 data; + struct { + u8 status; /* Descriptor status */ + u8 hdr_len; /* Header length */ + u16 mss; /* Maximum segment size */ + } fields; + } tcp_seg_setup; +}; + +/* Offload data descriptor */ +struct e1000_data_desc { + u64 buffer_addr; /* Address of the descriptor's buffer address */ + union { + u32 data; + struct { + u16 length; /* Data buffer length */ + u8 typ_len_ext; + u8 cmd; + } flags; + } lower; + union { + u32 data; + struct { + u8 status; /* Descriptor status */ + u8 popts; /* Packet Options */ + u16 special; + } fields; + } upper; +}; + +/* Statistics counters collected by the MAC */ +struct e1000_hw_stats { + u64 crcerrs; + u64 algnerrc; + u64 symerrs; + u64 rxerrc; + u64 mpc; + u64 scc; + u64 ecol; + u64 mcc; + u64 latecol; + u64 colc; + u64 dc; + u64 tncrs; + u64 sec; + u64 cexterr; + u64 rlec; + u64 xonrxc; + u64 xontxc; + u64 xoffrxc; + u64 xofftxc; + u64 fcruc; + u64 prc64; + u64 prc127; + u64 prc255; + u64 prc511; + u64 prc1023; + u64 prc1522; + u64 gprc; + u64 bprc; + u64 mprc; + u64 gptc; + u64 gorc; + u64 gotc; + u64 rnbc; + u64 ruc; + u64 rfc; + u64 roc; + u64 rjc; + u64 mgprc; + u64 mgpdc; + u64 mgptc; + u64 tor; + u64 tot; + u64 tpr; + u64 tpt; + u64 ptc64; + u64 ptc127; + u64 ptc255; + u64 ptc511; + u64 ptc1023; + u64 ptc1522; + u64 mptc; + u64 bptc; + u64 tsctc; + u64 tsctfc; + u64 iac; + u64 icrxptc; + u64 icrxatc; + u64 ictxptc; + u64 ictxatc; + u64 ictxqec; + u64 ictxqmtc; + u64 icrxdmtc; + u64 icrxoc; + u64 cbtmpc; + u64 htdpmc; + u64 cbrdpc; + u64 cbrmpc; + u64 rpthc; + u64 hgptc; + u64 htcbdpc; + u64 hgorc; + u64 hgotc; + u64 lenerrs; + u64 scvpc; + u64 hrmpc; +}; + +struct e1000_phy_stats { + u32 idle_errors; + u32 receive_errors; +}; + +struct e1000_host_mng_dhcp_cookie { + u32 signature; + u8 status; + u8 reserved0; + u16 vlan_id; + u32 reserved1; + u16 reserved2; + u8 reserved3; + u8 checksum; +}; + +/* Host Interface "Rev 1" */ +struct e1000_host_command_header { + u8 command_id; + u8 command_length; + u8 command_options; + u8 checksum; +}; + +#define E1000_HI_MAX_DATA_LENGTH 252 +struct e1000_host_command_info { + struct e1000_host_command_header command_header; + u8 command_data[E1000_HI_MAX_DATA_LENGTH]; +}; + +/* Host Interface "Rev 2" */ +struct e1000_host_mng_command_header { + u8 command_id; + u8 checksum; + u16 reserved1; + u16 reserved2; + u16 command_length; +}; + +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 +struct e1000_host_mng_command_info { + struct e1000_host_mng_command_header command_header; + u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; +}; + +#include "e1000_mac.h" +#include "e1000_phy.h" +#include "e1000_nvm.h" + +struct e1000_mac_operations { + s32 (*check_for_link)(struct e1000_hw *); + s32 (*reset_hw)(struct e1000_hw *); + s32 (*init_hw)(struct e1000_hw *); + s32 (*setup_physical_interface)(struct e1000_hw *); + void (*rar_set)(struct e1000_hw *, u8 *, u32); + s32 (*read_mac_addr)(struct e1000_hw *); + s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *); +}; + +struct e1000_phy_operations { + s32 (*acquire_phy)(struct e1000_hw *); + s32 (*force_speed_duplex)(struct e1000_hw *); + s32 (*get_cfg_done)(struct e1000_hw *hw); + s32 (*get_cable_length)(struct e1000_hw *); + s32 (*get_phy_info)(struct e1000_hw *); + s32 (*read_phy_reg)(struct e1000_hw *, u32, u16 *); + void (*release_phy)(struct e1000_hw *); + s32 (*reset_phy)(struct e1000_hw *); + s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); + s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); + s32 (*write_phy_reg)(struct e1000_hw *, u32, u16); +}; + +struct e1000_nvm_operations { + s32 (*acquire_nvm)(struct e1000_hw *); + s32 (*read_nvm)(struct e1000_hw *, u16, u16, u16 *); + void (*release_nvm)(struct e1000_hw *); + s32 (*write_nvm)(struct e1000_hw *, u16, u16, u16 *); +}; + +struct e1000_info { + s32 (*get_invariants)(struct e1000_hw *); + struct e1000_mac_operations *mac_ops; + struct e1000_phy_operations *phy_ops; + struct e1000_nvm_operations *nvm_ops; +}; + +extern const struct e1000_info e1000_82575_info; + +struct e1000_mac_info { + struct e1000_mac_operations ops; + + u8 addr[6]; + u8 perm_addr[6]; + + enum e1000_mac_type type; + + u32 collision_delta; + u32 ledctl_default; + u32 ledctl_mode1; + u32 ledctl_mode2; + u32 mc_filter_type; + u32 tx_packet_delta; + u32 txcw; + + u16 current_ifs_val; + u16 ifs_max_val; + u16 ifs_min_val; + u16 ifs_ratio; + u16 ifs_step_size; + u16 mta_reg_count; + u16 rar_entry_count; + + u8 forced_speed_duplex; + + bool adaptive_ifs; + bool arc_subsystem_valid; + bool asf_firmware_present; + bool autoneg; + bool autoneg_failed; + bool disable_av; + bool disable_hw_init_bits; + bool get_link_status; + bool ifs_params_forced; + bool in_ifs_mode; + bool report_tx_early; + bool serdes_has_link; + bool tx_pkt_filtering; +}; + +struct e1000_phy_info { + struct e1000_phy_operations ops; + + enum e1000_phy_type type; + + enum e1000_1000t_rx_status local_rx; + enum e1000_1000t_rx_status remote_rx; + enum e1000_ms_type ms_type; + enum e1000_ms_type original_ms_type; + enum e1000_rev_polarity cable_polarity; + enum e1000_smart_speed smart_speed; + + u32 addr; + u32 id; + u32 reset_delay_us; /* in usec */ + u32 revision; + + enum e1000_media_type media_type; + + u16 autoneg_advertised; + u16 autoneg_mask; + u16 cable_length; + u16 max_cable_length; + u16 min_cable_length; + + u8 mdix; + + bool disable_polarity_correction; + bool is_mdix; + bool polarity_correction; + bool reset_disable; + bool speed_downgraded; + bool autoneg_wait_to_complete; +}; + +struct e1000_nvm_info { + struct e1000_nvm_operations ops; + + enum e1000_nvm_type type; + enum e1000_nvm_override override; + + u32 flash_bank_size; + u32 flash_base_addr; + + u16 word_size; + u16 delay_usec; + u16 address_bits; + u16 opcode_bits; + u16 page_size; +}; + +struct e1000_bus_info { + enum e1000_bus_type type; + enum e1000_bus_speed speed; + enum e1000_bus_width width; + + u32 snoop; + + u16 func; + u16 pci_cmd_word; +}; + +struct e1000_fc_info { + u32 high_water; /* Flow control high-water mark */ + u32 low_water; /* Flow control low-water mark */ + u16 pause_time; /* Flow control pause timer */ + bool send_xon; /* Flow control send XON */ + bool strict_ieee; /* Strict IEEE mode */ + enum e1000_fc_type type; /* Type of flow control */ + enum e1000_fc_type original_type; +}; + +struct e1000_hw { + void *back; + void *dev_spec; + + u8 __iomem *hw_addr; + u8 __iomem *flash_address; + unsigned long io_base; + + struct e1000_mac_info mac; + struct e1000_fc_info fc; + struct e1000_phy_info phy; + struct e1000_nvm_info nvm; + struct e1000_bus_info bus; + struct e1000_host_mng_dhcp_cookie mng_cookie; + + u32 dev_spec_size; + + u16 device_id; + u16 subsystem_vendor_id; + u16 subsystem_device_id; + u16 vendor_id; + + u8 revision_id; +}; + +#ifdef DEBUG +extern char *igb_get_hw_dev_name(struct e1000_hw *hw); +#define hw_dbg(hw, format, arg...) \ + printk(KERN_DEBUG "%s: " format, igb_get_hw_dev_name(hw), ##arg) +#else +static inline int __attribute__ ((format (printf, 2, 3))) +hw_dbg(struct e1000_hw *hw, const char *format, ...) +{ + return 0; +} +#endif + +#endif diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c new file mode 100644 index 00000000000..3e84a3f0c1d --- /dev/null +++ b/drivers/net/igb/e1000_mac.c @@ -0,0 +1,1505 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/if_ether.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/netdevice.h> + +#include "e1000_mac.h" + +#include "igb.h" + +static s32 igb_set_default_fc(struct e1000_hw *hw); +static s32 igb_set_fc_watermarks(struct e1000_hw *hw); +static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); + +/** + * e1000_remove_device - Free device specific structure + * @hw: pointer to the HW structure + * + * If a device specific structure was allocated, this function will + * free it. + **/ +void igb_remove_device(struct e1000_hw *hw) +{ + /* Freeing the dev_spec member of e1000_hw structure */ + kfree(hw->dev_spec); +} + +static void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + struct igb_adapter *adapter = hw->back; + + pci_read_config_word(adapter->pdev, reg, value); +} + +static s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + struct igb_adapter *adapter = hw->back; + u16 cap_offset; + + cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); + if (!cap_offset) + return -E1000_ERR_CONFIG; + + pci_read_config_word(adapter->pdev, cap_offset + reg, value); + + return 0; +} + +/** + * e1000_get_bus_info_pcie - Get PCIe bus information + * @hw: pointer to the HW structure + * + * Determines and stores the system bus information for a particular + * network interface. The following bus information is determined and stored: + * bus speed, bus width, type (PCIe), and PCIe function. + **/ +s32 igb_get_bus_info_pcie(struct e1000_hw *hw) +{ + struct e1000_bus_info *bus = &hw->bus; + s32 ret_val; + u32 status; + u16 pcie_link_status, pci_header_type; + + bus->type = e1000_bus_type_pci_express; + bus->speed = e1000_bus_speed_2500; + + ret_val = igb_read_pcie_cap_reg(hw, + PCIE_LINK_STATUS, + &pcie_link_status); + if (ret_val) + bus->width = e1000_bus_width_unknown; + else + bus->width = (enum e1000_bus_width)((pcie_link_status & + PCIE_LINK_WIDTH_MASK) >> + PCIE_LINK_WIDTH_SHIFT); + + igb_read_pci_cfg(hw, PCI_HEADER_TYPE_REGISTER, &pci_header_type); + if (pci_header_type & PCI_HEADER_TYPE_MULTIFUNC) { + status = rd32(E1000_STATUS); + bus->func = (status & E1000_STATUS_FUNC_MASK) + >> E1000_STATUS_FUNC_SHIFT; + } else { + bus->func = 0; + } + + return 0; +} + +/** + * e1000_clear_vfta - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * Clears the register array which contains the VLAN filter table by + * setting all the values to 0. + **/ +void igb_clear_vfta(struct e1000_hw *hw) +{ + u32 offset; + + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + array_wr32(E1000_VFTA, offset, 0); + wrfl(); + } +} + +/** + * e1000_write_vfta - Write value to VLAN filter table + * @hw: pointer to the HW structure + * @offset: register offset in VLAN filter table + * @value: register value written to VLAN filter table + * + * Writes value at the given offset in the register array which stores + * the VLAN filter table. + **/ +void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) +{ + array_wr32(E1000_VFTA, offset, value); + wrfl(); +} + +/** + * e1000_init_rx_addrs - Initialize receive address's + * @hw: pointer to the HW structure + * @rar_count: receive address registers + * + * Setups the receive address registers by setting the base receive address + * register to the devices MAC address and clearing all the other receive + * address registers to 0. + **/ +void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) +{ + u32 i; + + /* Setup the receive address */ + hw_dbg(hw, "Programming MAC Address into RAR[0]\n"); + + hw->mac.ops.rar_set(hw, hw->mac.addr, 0); + + /* Zero out the other (rar_entry_count - 1) receive addresses */ + hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1); + for (i = 1; i < rar_count; i++) { + array_wr32(E1000_RA, (i << 1), 0); + wrfl(); + array_wr32(E1000_RA, ((i << 1) + 1), 0); + wrfl(); + } +} + +/** + * e1000_check_alt_mac_addr - Check for alternate MAC addr + * @hw: pointer to the HW structure + * + * Checks the nvm for an alternate MAC address. An alternate MAC address + * can be setup by pre-boot software and must be treated like a permanent + * address and must override the actual permanent MAC address. If an + * alternate MAC address is fopund it is saved in the hw struct and + * prgrammed into RAR0 and the cuntion returns success, otherwise the + * fucntion returns an error. + **/ +s32 igb_check_alt_mac_addr(struct e1000_hw *hw) +{ + u32 i; + s32 ret_val = 0; + u16 offset, nvm_alt_mac_addr_offset, nvm_data; + u8 alt_mac_addr[ETH_ALEN]; + + ret_val = hw->nvm.ops.read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, + &nvm_alt_mac_addr_offset); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + goto out; + } + + if (nvm_alt_mac_addr_offset == 0xFFFF) { + ret_val = -(E1000_NOT_IMPLEMENTED); + goto out; + } + + if (hw->bus.func == E1000_FUNC_1) + nvm_alt_mac_addr_offset += ETH_ALEN/sizeof(u16); + + for (i = 0; i < ETH_ALEN; i += 2) { + offset = nvm_alt_mac_addr_offset + (i >> 1); + ret_val = hw->nvm.ops.read_nvm(hw, offset, 1, &nvm_data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + goto out; + } + + alt_mac_addr[i] = (u8)(nvm_data & 0xFF); + alt_mac_addr[i + 1] = (u8)(nvm_data >> 8); + } + + /* if multicast bit is set, the alternate address will not be used */ + if (alt_mac_addr[0] & 0x01) { + ret_val = -(E1000_NOT_IMPLEMENTED); + goto out; + } + + for (i = 0; i < ETH_ALEN; i++) + hw->mac.addr[i] = hw->mac.perm_addr[i] = alt_mac_addr[i]; + + hw->mac.ops.rar_set(hw, hw->mac.perm_addr, 0); + +out: + return ret_val; +} + +/** + * e1000_rar_set - Set receive address register + * @hw: pointer to the HW structure + * @addr: pointer to the receive address + * @index: receive address array register + * + * Sets the receive address array register at index to the address passed + * in by addr. + **/ +void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) +{ + u32 rar_low, rar_high; + + /* + * HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32) addr[0] | + ((u32) addr[1] << 8) | + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + + rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); + + if (!hw->mac.disable_av) + rar_high |= E1000_RAH_AV; + + array_wr32(E1000_RA, (index << 1), rar_low); + array_wr32(E1000_RA, ((index << 1) + 1), rar_high); +} + +/** + * e1000_mta_set - Set multicast filter table address + * @hw: pointer to the HW structure + * @hash_value: determines the MTA register and bit to set + * + * The multicast table address is a register array of 32-bit registers. + * The hash_value is used to determine what register the bit is in, the + * current value is read, the new bit is OR'd in and the new value is + * written back into the register. + **/ +static void igb_mta_set(struct e1000_hw *hw, u32 hash_value) +{ + u32 hash_bit, hash_reg, mta; + + /* + * The MTA is a register array of 32-bit registers. It is + * treated like an array of (32*mta_reg_count) bits. We want to + * set bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The (hw->mac.mta_reg_count - 1) serves as a + * mask to bits 31:5 of the hash value which gives us the + * register we're modifying. The hash bit within that register + * is determined by the lower 5 bits of the hash value. + */ + hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); + hash_bit = hash_value & 0x1F; + + mta = array_rd32(E1000_MTA, hash_reg); + + mta |= (1 << hash_bit); + + array_wr32(E1000_MTA, hash_reg, mta); + wrfl(); +} + +/** + * e1000_update_mc_addr_list - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * @rar_used_count: the first RAR register free to program + * @rar_count: total number of supported Receive Address Registers + * + * Updates the Receive Address Registers and Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + * The parameter rar_count will usually be hw->mac.rar_entry_count + * unless there are workarounds that change this. + **/ +void igb_update_mc_addr_list(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count, + u32 rar_used_count, u32 rar_count) +{ + u32 hash_value; + u32 i; + + /* + * Load the first set of multicast addresses into the exact + * filters (RAR). If there are not enough to fill the RAR + * array, clear the filters. + */ + for (i = rar_used_count; i < rar_count; i++) { + if (mc_addr_count) { + hw->mac.ops.rar_set(hw, mc_addr_list, i); + mc_addr_count--; + mc_addr_list += ETH_ALEN; + } else { + array_wr32(E1000_RA, i << 1, 0); + wrfl(); + array_wr32(E1000_RA, (i << 1) + 1, 0); + wrfl(); + } + } + + /* Clear the old settings from the MTA */ + hw_dbg(hw, "Clearing MTA\n"); + for (i = 0; i < hw->mac.mta_reg_count; i++) { + array_wr32(E1000_MTA, i, 0); + wrfl(); + } + + /* Load any remaining multicast addresses into the hash table. */ + for (; mc_addr_count > 0; mc_addr_count--) { + hash_value = igb_hash_mc_addr(hw, mc_addr_list); + hw_dbg(hw, "Hash value = 0x%03X\n", hash_value); + igb_mta_set(hw, hash_value); + mc_addr_list += ETH_ALEN; + } +} + +/** + * e1000_hash_mc_addr - Generate a multicast hash value + * @hw: pointer to the HW structure + * @mc_addr: pointer to a multicast address + * + * Generates a multicast address hash value which is used to determine + * the multicast filter table array address and new table value. See + * igb_mta_set() + **/ +static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) +{ + u32 hash_value, hash_mask; + u8 bit_shift = 0; + + /* Register count multiplied by bits per register */ + hash_mask = (hw->mac.mta_reg_count * 32) - 1; + + /* + * For a mc_filter_type of 0, bit_shift is the number of left-shifts + * where 0xFF would still fall within the hash mask. + */ + while (hash_mask >> bit_shift != 0xFF) + bit_shift++; + + /* + * The portion of the address that is used for the hash table + * is determined by the mc_filter_type setting. + * The algorithm is such that there is a total of 8 bits of shifting. + * The bit_shift for a mc_filter_type of 0 represents the number of + * left-shifts where the MSB of mc_addr[5] would still fall within + * the hash_mask. Case 0 does this exactly. Since there are a total + * of 8 bits of shifting, then mc_addr[4] will shift right the + * remaining number of bits. Thus 8 - bit_shift. The rest of the + * cases are a variation of this algorithm...essentially raising the + * number of bits to shift mc_addr[5] left, while still keeping the + * 8-bit shifting total. + * + * For example, given the following Destination MAC Address and an + * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask), + * we can see that the bit_shift for case 0 is 4. These are the hash + * values resulting from each mc_filter_type... + * [0] [1] [2] [3] [4] [5] + * 01 AA 00 12 34 56 + * LSB MSB + * + * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563 + * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6 + * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163 + * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634 + */ + switch (hw->mac.mc_filter_type) { + default: + case 0: + break; + case 1: + bit_shift += 1; + break; + case 2: + bit_shift += 2; + break; + case 3: + bit_shift += 4; + break; + } + + hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | + (((u16) mc_addr[5]) << bit_shift))); + + return hash_value; +} + +/** + * e1000_clear_hw_cntrs_base - Clear base hardware counters + * @hw: pointer to the HW structure + * + * Clears the base hardware counters by reading the counter registers. + **/ +void igb_clear_hw_cntrs_base(struct e1000_hw *hw) +{ + u32 temp; + + temp = rd32(E1000_CRCERRS); + temp = rd32(E1000_SYMERRS); + temp = rd32(E1000_MPC); + temp = rd32(E1000_SCC); + temp = rd32(E1000_ECOL); + temp = rd32(E1000_MCC); + temp = rd32(E1000_LATECOL); + temp = rd32(E1000_COLC); + temp = rd32(E1000_DC); + temp = rd32(E1000_SEC); + temp = rd32(E1000_RLEC); + temp = rd32(E1000_XONRXC); + temp = rd32(E1000_XONTXC); + temp = rd32(E1000_XOFFRXC); + temp = rd32(E1000_XOFFTXC); + temp = rd32(E1000_FCRUC); + temp = rd32(E1000_GPRC); + temp = rd32(E1000_BPRC); + temp = rd32(E1000_MPRC); + temp = rd32(E1000_GPTC); + temp = rd32(E1000_GORCL); + temp = rd32(E1000_GORCH); + temp = rd32(E1000_GOTCL); + temp = rd32(E1000_GOTCH); + temp = rd32(E1000_RNBC); + temp = rd32(E1000_RUC); + temp = rd32(E1000_RFC); + temp = rd32(E1000_ROC); + temp = rd32(E1000_RJC); + temp = rd32(E1000_TORL); + temp = rd32(E1000_TORH); + temp = rd32(E1000_TOTL); + temp = rd32(E1000_TOTH); + temp = rd32(E1000_TPR); + temp = rd32(E1000_TPT); + temp = rd32(E1000_MPTC); + temp = rd32(E1000_BPTC); +} + +/** + * e1000_check_for_copper_link - Check for link (Copper) + * @hw: pointer to the HW structure + * + * Checks to see of the link status of the hardware has changed. If a + * change in link status has been detected, then we read the PHY registers + * to get the current speed/duplex if link exists. + **/ +s32 igb_check_for_copper_link(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + bool link; + + /* + * We only want to go out to the PHY registers to see if Auto-Neg + * has completed and/or if our link status has changed. The + * get_link_status flag is set upon receiving a Link Status + * Change or Rx Sequence Error interrupt. + */ + if (!mac->get_link_status) { + ret_val = 0; + goto out; + } + + /* + * First we want to see if the MII Status Register reports + * link. If so, then we want to get the current speed/duplex + * of the PHY. + */ + ret_val = igb_phy_has_link(hw, 1, 0, &link); + if (ret_val) + goto out; + + if (!link) + goto out; /* No link detected */ + + mac->get_link_status = false; + + /* + * Check if there was DownShift, must be checked + * immediately after link-up + */ + igb_check_downshift(hw); + + /* + * If we are forcing speed/duplex, then we simply return since + * we have already determined whether we have link or not. + */ + if (!mac->autoneg) { + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + /* + * Auto-Neg is enabled. Auto Speed Detection takes care + * of MAC speed/duplex configuration. So we only need to + * configure Collision Distance in the MAC. + */ + igb_config_collision_dist(hw); + + /* + * Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + ret_val = igb_config_fc_after_link_up(hw); + if (ret_val) + hw_dbg(hw, "Error configuring flow control\n"); + +out: + return ret_val; +} + +/** + * e1000_setup_link - Setup flow control and link settings + * @hw: pointer to the HW structure + * + * Determines which flow control settings to use, then configures flow + * control. Calls the appropriate media-specific link configuration + * function. Assuming the adapter has a valid link partner, a valid link + * should be established. Assumes the hardware has previously been reset + * and the transmitter and receiver are not enabled. + **/ +s32 igb_setup_link(struct e1000_hw *hw) +{ + s32 ret_val = 0; + + /* + * In the case of the phy reset being blocked, we already have a link. + * We do not need to set it up again. + */ + if (igb_check_reset_block(hw)) + goto out; + + ret_val = igb_set_default_fc(hw); + if (ret_val) + goto out; + + /* + * We want to save off the original Flow Control configuration just + * in case we get disconnected and then reconnected into a different + * hub or switch with different Flow Control capabilities. + */ + hw->fc.original_type = hw->fc.type; + + hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", hw->fc.type); + + /* Call the necessary media_type subroutine to configure the link. */ + ret_val = hw->mac.ops.setup_physical_interface(hw); + if (ret_val) + goto out; + + /* + * Initialize the flow control address, type, and PAUSE timer + * registers to their default values. This is done even if flow + * control is disabled, because it does not hurt anything to + * initialize these registers. + */ + hw_dbg(hw, + "Initializing the Flow Control address, type and timer regs\n"); + wr32(E1000_FCT, FLOW_CONTROL_TYPE); + wr32(E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH); + wr32(E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW); + + wr32(E1000_FCTTV, hw->fc.pause_time); + + ret_val = igb_set_fc_watermarks(hw); + +out: + return ret_val; +} + +/** + * e1000_config_collision_dist - Configure collision distance + * @hw: pointer to the HW structure + * + * Configures the collision distance to the default value and is used + * during link setup. Currently no func pointer exists and all + * implementations are handled in the generic version of this function. + **/ +void igb_config_collision_dist(struct e1000_hw *hw) +{ + u32 tctl; + + tctl = rd32(E1000_TCTL); + + tctl &= ~E1000_TCTL_COLD; + tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT; + + wr32(E1000_TCTL, tctl); + wrfl(); +} + +/** + * e1000_set_fc_watermarks - Set flow control high/low watermarks + * @hw: pointer to the HW structure + * + * Sets the flow control high/low threshold (watermark) registers. If + * flow control XON frame transmission is enabled, then set XON frame + * tansmission as well. + **/ +static s32 igb_set_fc_watermarks(struct e1000_hw *hw) +{ + s32 ret_val = 0; + u32 fcrtl = 0, fcrth = 0; + + /* + * Set the flow control receive threshold registers. Normally, + * these registers will be set to a default threshold that may be + * adjusted later by the driver's runtime code. However, if the + * ability to transmit pause frames is not enabled, then these + * registers will be set to 0. + */ + if (hw->fc.type & e1000_fc_tx_pause) { + /* + * We need to set up the Receive Threshold high and low water + * marks as well as (optionally) enabling the transmission of + * XON frames. + */ + fcrtl = hw->fc.low_water; + if (hw->fc.send_xon) + fcrtl |= E1000_FCRTL_XONE; + + fcrth = hw->fc.high_water; + } + wr32(E1000_FCRTL, fcrtl); + wr32(E1000_FCRTH, fcrth); + + return ret_val; +} + +/** + * e1000_set_default_fc - Set flow control default values + * @hw: pointer to the HW structure + * + * Read the EEPROM for the default values for flow control and store the + * values. + **/ +static s32 igb_set_default_fc(struct e1000_hw *hw) +{ + s32 ret_val = 0; + u16 nvm_data; + + /* + * Read and store word 0x0F of the EEPROM. This word contains bits + * that determine the hardware's default PAUSE (flow control) mode, + * a bit that determines whether the HW defaults to enabling or + * disabling auto-negotiation, and the direction of the + * SW defined pins. If there is no SW over-ride of the flow + * control setting, then the variable hw->fc will + * be initialized based on a value in the EEPROM. + */ + ret_val = hw->nvm.ops.read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, + &nvm_data); + + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + goto out; + } + + if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0) + hw->fc.type = e1000_fc_none; + else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == + NVM_WORD0F_ASM_DIR) + hw->fc.type = e1000_fc_tx_pause; + else + hw->fc.type = e1000_fc_full; + +out: + return ret_val; +} + +/** + * e1000_force_mac_fc - Force the MAC's flow control settings + * @hw: pointer to the HW structure + * + * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the + * device control register to reflect the adapter settings. TFCE and RFCE + * need to be explicitly set by software when a copper PHY is used because + * autonegotiation is managed by the PHY rather than the MAC. Software must + * also configure these bits when link is forced on a fiber connection. + **/ +s32 igb_force_mac_fc(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val = 0; + + ctrl = rd32(E1000_CTRL); + + /* + * Because we didn't get link via the internal auto-negotiation + * mechanism (we either forced link or we got link via PHY + * auto-neg), we have to manually enable/disable transmit an + * receive flow control. + * + * The "Case" statement below enables/disable flow control + * according to the "hw->fc.type" parameter. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause + * frames but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * frames but we do not receive pause frames). + * 3: Both Rx and TX flow control (symmetric) is enabled. + * other: No other values should be possible at this point. + */ + hw_dbg(hw, "hw->fc.type = %u\n", hw->fc.type); + + switch (hw->fc.type) { + case e1000_fc_none: + ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); + break; + case e1000_fc_rx_pause: + ctrl &= (~E1000_CTRL_TFCE); + ctrl |= E1000_CTRL_RFCE; + break; + case e1000_fc_tx_pause: + ctrl &= (~E1000_CTRL_RFCE); + ctrl |= E1000_CTRL_TFCE; + break; + case e1000_fc_full: + ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); + break; + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + wr32(E1000_CTRL, ctrl); + +out: + return ret_val; +} + +/** + * e1000_config_fc_after_link_up - Configures flow control after link + * @hw: pointer to the HW structure + * + * Checks the status of auto-negotiation after link up to ensure that the + * speed and duplex were not forced. If the link needed to be forced, then + * flow control needs to be forced also. If auto-negotiation is enabled + * and did not fail, then we configure flow control based on our link + * partner. + **/ +s32 igb_config_fc_after_link_up(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val = 0; + u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; + u16 speed, duplex; + + /* + * Check for the case where we have fiber media and auto-neg failed + * so we had to force link. In this case, we need to force the + * configuration of the MAC to match the "fc" parameter. + */ + if (mac->autoneg_failed) { + if (hw->phy.media_type == e1000_media_type_fiber || + hw->phy.media_type == e1000_media_type_internal_serdes) + ret_val = igb_force_mac_fc(hw); + } else { + if (hw->phy.media_type == e1000_media_type_copper) + ret_val = igb_force_mac_fc(hw); + } + + if (ret_val) { + hw_dbg(hw, "Error forcing flow control settings\n"); + goto out; + } + + /* + * Check for the case where we have copper media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) { + /* + * Read the MII Status Register and check to see if AutoNeg + * has completed. We read this twice because this reg has + * some "sticky" (latched) bits. + */ + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS, + &mii_status_reg); + if (ret_val) + goto out; + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS, + &mii_status_reg); + if (ret_val) + goto out; + + if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { + hw_dbg(hw, "Copper PHY and Auto Neg " + "has not completed.\n"); + goto out; + } + + /* + * The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement + * Register (Address 4) and the Auto_Negotiation Base + * Page Ability Register (Address 5) to determine how + * flow control was negotiated. + */ + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_AUTONEG_ADV, + &mii_nway_adv_reg); + if (ret_val) + goto out; + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_LP_ABILITY, + &mii_nway_lp_ability_reg); + if (ret_val) + goto out; + + /* + * Two bits in the Auto Negotiation Advertisement Register + * (Address 4) and two bits in the Auto Negotiation Base + * Page Ability Register (Address 5) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | e1000_fc_none + * 0 | 1 | 0 | DC | e1000_fc_none + * 0 | 1 | 1 | 0 | e1000_fc_none + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 1 | 0 | 0 | DC | e1000_fc_none + * 1 | DC | 1 | DC | e1000_fc_full + * 1 | 1 | 0 | 0 | e1000_fc_none + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * + * Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | E1000_fc_full + * + */ + if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { + /* + * Now we need to check if the user selected RX ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise RX + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.original_type == e1000_fc_full) { + hw->fc.type = e1000_fc_full; + hw_dbg(hw, "Flow Control = FULL.\r\n"); + } else { + hw->fc.type = e1000_fc_rx_pause; + hw_dbg(hw, "Flow Control = " + "RX PAUSE frames only.\r\n"); + } + } + /* + * For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + */ + else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + hw->fc.type = e1000_fc_tx_pause; + hw_dbg(hw, "Flow Control = TX PAUSE frames only.\r\n"); + } + /* + * For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + */ + else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + hw->fc.type = e1000_fc_rx_pause; + hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); + } + /* + * Per the IEEE spec, at this point flow control should be + * disabled. However, we want to consider that we could + * be connected to a legacy switch that doesn't advertise + * desired flow control, but can be forced on the link + * partner. So if we advertised no flow control, that is + * what we will resolve to. If we advertised some kind of + * receive capability (Rx Pause Only or Full Flow Control) + * and the link partner advertised none, we will configure + * ourselves to enable Rx Flow Control only. We can do + * this safely for two reasons: If the link partner really + * didn't want flow control enabled, and we enable Rx, no + * harm done since we won't be receiving any PAUSE frames + * anyway. If the intent on the link partner was to have + * flow control enabled, then by us enabling RX only, we + * can at least receive pause frames and process them. + * This is a good idea because in most cases, since we are + * predominantly a server NIC, more times than not we will + * be asked to delay transmission of packets than asking + * our link partner to pause transmission of frames. + */ + else if ((hw->fc.original_type == e1000_fc_none || + hw->fc.original_type == e1000_fc_tx_pause) || + hw->fc.strict_ieee) { + hw->fc.type = e1000_fc_none; + hw_dbg(hw, "Flow Control = NONE.\r\n"); + } else { + hw->fc.type = e1000_fc_rx_pause; + hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); + } + + /* + * Now we need to do one last check... If we auto- + * negotiated to HALF DUPLEX, flow control should not be + * enabled per IEEE 802.3 spec. + */ + ret_val = hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) { + hw_dbg(hw, "Error getting link speed and duplex\n"); + goto out; + } + + if (duplex == HALF_DUPLEX) + hw->fc.type = e1000_fc_none; + + /* + * Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + ret_val = igb_force_mac_fc(hw); + if (ret_val) { + hw_dbg(hw, "Error forcing flow control settings\n"); + goto out; + } + } + +out: + return ret_val; +} + +/** + * e1000_get_speed_and_duplex_copper - Retreive current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Read the status register for the current speed/duplex and store the current + * speed and duplex for copper connections. + **/ +s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + u32 status; + + status = rd32(E1000_STATUS); + if (status & E1000_STATUS_SPEED_1000) { + *speed = SPEED_1000; + hw_dbg(hw, "1000 Mbs, "); + } else if (status & E1000_STATUS_SPEED_100) { + *speed = SPEED_100; + hw_dbg(hw, "100 Mbs, "); + } else { + *speed = SPEED_10; + hw_dbg(hw, "10 Mbs, "); + } + + if (status & E1000_STATUS_FD) { + *duplex = FULL_DUPLEX; + hw_dbg(hw, "Full Duplex\n"); + } else { + *duplex = HALF_DUPLEX; + hw_dbg(hw, "Half Duplex\n"); + } + + return 0; +} + +/** + * e1000_get_hw_semaphore - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM + **/ +s32 igb_get_hw_semaphore(struct e1000_hw *hw) +{ + u32 swsm; + s32 ret_val = 0; + s32 timeout = hw->nvm.word_size + 1; + s32 i = 0; + + /* Get the SW semaphore */ + while (i < timeout) { + swsm = rd32(E1000_SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + udelay(50); + i++; + } + + if (i == timeout) { + hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + + /* Get the FW semaphore. */ + for (i = 0; i < timeout; i++) { + swsm = rd32(E1000_SWSM); + wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI); + + /* Semaphore acquired if bit latched */ + if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI) + break; + + udelay(50); + } + + if (i == timeout) { + /* Release semaphores */ + igb_put_hw_semaphore(hw); + hw_dbg(hw, "Driver can't access the NVM\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_put_hw_semaphore - Release hardware semaphore + * @hw: pointer to the HW structure + * + * Release hardware semaphore used to access the PHY or NVM + **/ +void igb_put_hw_semaphore(struct e1000_hw *hw) +{ + u32 swsm; + + swsm = rd32(E1000_SWSM); + + swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + + wr32(E1000_SWSM, swsm); +} + +/** + * e1000_get_auto_rd_done - Check for auto read completion + * @hw: pointer to the HW structure + * + * Check EEPROM for Auto Read done bit. + **/ +s32 igb_get_auto_rd_done(struct e1000_hw *hw) +{ + s32 i = 0; + s32 ret_val = 0; + + + while (i < AUTO_READ_DONE_TIMEOUT) { + if (rd32(E1000_EECD) & E1000_EECD_AUTO_RD) + break; + msleep(1); + i++; + } + + if (i == AUTO_READ_DONE_TIMEOUT) { + hw_dbg(hw, "Auto read by HW from NVM has not completed.\n"); + ret_val = -E1000_ERR_RESET; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_valid_led_default - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + ret_val = hw->nvm.ops.read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + goto out; + } + + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) + *data = ID_LED_DEFAULT; + +out: + return ret_val; +} + +/** + * e1000_id_led_init - + * @hw: pointer to the HW structure + * + **/ +s32 igb_id_led_init(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + const u32 ledctl_mask = 0x000000FF; + const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; + const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; + u16 data, i, temp; + const u16 led_mask = 0x0F; + + ret_val = igb_valid_led_default(hw, &data); + if (ret_val) + goto out; + + mac->ledctl_default = rd32(E1000_LEDCTL); + mac->ledctl_mode1 = mac->ledctl_default; + mac->ledctl_mode2 = mac->ledctl_default; + + for (i = 0; i < 4; i++) { + temp = (data >> (i << 2)) & led_mask; + switch (temp) { + case ID_LED_ON1_DEF2: + case ID_LED_ON1_ON2: + case ID_LED_ON1_OFF2: + mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode1 |= ledctl_on << (i << 3); + break; + case ID_LED_OFF1_DEF2: + case ID_LED_OFF1_ON2: + case ID_LED_OFF1_OFF2: + mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode1 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + switch (temp) { + case ID_LED_DEF1_ON2: + case ID_LED_ON1_ON2: + case ID_LED_OFF1_ON2: + mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode2 |= ledctl_on << (i << 3); + break; + case ID_LED_DEF1_OFF2: + case ID_LED_ON1_OFF2: + case ID_LED_OFF1_OFF2: + mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode2 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + } + +out: + return ret_val; +} + +/** + * e1000_cleanup_led - Set LED config to default operation + * @hw: pointer to the HW structure + * + * Remove the current LED configuration and set the LED configuration + * to the default value, saved from the EEPROM. + **/ +s32 igb_cleanup_led(struct e1000_hw *hw) +{ + wr32(E1000_LEDCTL, hw->mac.ledctl_default); + return 0; +} + +/** + * e1000_blink_led - Blink LED + * @hw: pointer to the HW structure + * + * Blink the led's which are set to be on. + **/ +s32 igb_blink_led(struct e1000_hw *hw) +{ + u32 ledctl_blink = 0; + u32 i; + + if (hw->phy.media_type == e1000_media_type_fiber) { + /* always blink LED0 for PCI-E fiber */ + ledctl_blink = E1000_LEDCTL_LED0_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); + } else { + /* + * set the blink bit for each LED that's "on" (0x0E) + * in ledctl_mode2 + */ + ledctl_blink = hw->mac.ledctl_mode2; + for (i = 0; i < 4; i++) + if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == + E1000_LEDCTL_MODE_LED_ON) + ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << + (i * 8)); + } + + wr32(E1000_LEDCTL, ledctl_blink); + + return 0; +} + +/** + * e1000_led_off - Turn LED off + * @hw: pointer to the HW structure + * + * Turn LED off. + **/ +s32 igb_led_off(struct e1000_hw *hw) +{ + u32 ctrl; + + switch (hw->phy.media_type) { + case e1000_media_type_fiber: + ctrl = rd32(E1000_CTRL); + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + wr32(E1000_CTRL, ctrl); + break; + case e1000_media_type_copper: + wr32(E1000_LEDCTL, hw->mac.ledctl_mode1); + break; + default: + break; + } + + return 0; +} + +/** + * e1000_disable_pcie_master - Disables PCI-express master access + * @hw: pointer to the HW structure + * + * Returns 0 (0) if successful, else returns -10 + * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued + * the master requests to be disabled. + * + * Disables PCI-Express master access and verifies there are no pending + * requests. + **/ +s32 igb_disable_pcie_master(struct e1000_hw *hw) +{ + u32 ctrl; + s32 timeout = MASTER_DISABLE_TIMEOUT; + s32 ret_val = 0; + + if (hw->bus.type != e1000_bus_type_pci_express) + goto out; + + ctrl = rd32(E1000_CTRL); + ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; + wr32(E1000_CTRL, ctrl); + + while (timeout) { + if (!(rd32(E1000_STATUS) & + E1000_STATUS_GIO_MASTER_ENABLE)) + break; + udelay(100); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Master requests are pending.\n"); + ret_val = -E1000_ERR_MASTER_REQUESTS_PENDING; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_reset_adaptive - Reset Adaptive Interframe Spacing + * @hw: pointer to the HW structure + * + * Reset the Adaptive Interframe Spacing throttle to default values. + **/ +void igb_reset_adaptive(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + if (!mac->adaptive_ifs) { + hw_dbg(hw, "Not in Adaptive IFS mode!\n"); + goto out; + } + + if (!mac->ifs_params_forced) { + mac->current_ifs_val = 0; + mac->ifs_min_val = IFS_MIN; + mac->ifs_max_val = IFS_MAX; + mac->ifs_step_size = IFS_STEP; + mac->ifs_ratio = IFS_RATIO; + } + + mac->in_ifs_mode = false; + wr32(E1000_AIT, 0); +out: + return; +} + +/** + * e1000_update_adaptive - Update Adaptive Interframe Spacing + * @hw: pointer to the HW structure + * + * Update the Adaptive Interframe Spacing Throttle value based on the + * time between transmitted packets and time between collisions. + **/ +void igb_update_adaptive(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + if (!mac->adaptive_ifs) { + hw_dbg(hw, "Not in Adaptive IFS mode!\n"); + goto out; + } + + if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { + if (mac->tx_packet_delta > MIN_NUM_XMITS) { + mac->in_ifs_mode = true; + if (mac->current_ifs_val < mac->ifs_max_val) { + if (!mac->current_ifs_val) + mac->current_ifs_val = mac->ifs_min_val; + else + mac->current_ifs_val += + mac->ifs_step_size; + wr32(E1000_AIT, + mac->current_ifs_val); + } + } + } else { + if (mac->in_ifs_mode && + (mac->tx_packet_delta <= MIN_NUM_XMITS)) { + mac->current_ifs_val = 0; + mac->in_ifs_mode = false; + wr32(E1000_AIT, 0); + } + } +out: + return; +} + +/** + * e1000_validate_mdi_setting - Verify MDI/MDIx settings + * @hw: pointer to the HW structure + * + * Verify that when not using auto-negotitation that MDI/MDIx is correctly + * set, which is forced to MDI mode only. + **/ +s32 igb_validate_mdi_setting(struct e1000_hw *hw) +{ + s32 ret_val = 0; + + if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) { + hw_dbg(hw, "Invalid MDI setting detected\n"); + hw->phy.mdix = 1; + ret_val = -E1000_ERR_CONFIG; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_write_8bit_ctrl_reg - Write a 8bit CTRL register + * @hw: pointer to the HW structure + * @reg: 32bit register offset such as E1000_SCTL + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes an address/data control type register. There are several of these + * and they all have the format address << 8 | data and bit 31 is polled for + * completion. + **/ +s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, + u32 offset, u8 data) +{ + u32 i, regvalue = 0; + s32 ret_val = 0; + + /* Set up the address and data */ + regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT); + wr32(reg, regvalue); + + /* Poll the ready bit to see if the MDI read completed */ + for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) { + udelay(5); + regvalue = rd32(reg); + if (regvalue & E1000_GEN_CTL_READY) + break; + } + if (!(regvalue & E1000_GEN_CTL_READY)) { + hw_dbg(hw, "Reg %08x did not indicate ready\n", reg); + ret_val = -E1000_ERR_PHY; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_enable_mng_pass_thru - Enable processing of ARP's + * @hw: pointer to the HW structure + * + * Verifies the hardware needs to allow ARPs to be processed by the host. + **/ +bool igb_enable_mng_pass_thru(struct e1000_hw *hw) +{ + u32 manc; + u32 fwsm, factps; + bool ret_val = false; + + if (!hw->mac.asf_firmware_present) + goto out; + + manc = rd32(E1000_MANC); + + if (!(manc & E1000_MANC_RCV_TCO_EN) || + !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) + goto out; + + if (hw->mac.arc_subsystem_valid) { + fwsm = rd32(E1000_FWSM); + factps = rd32(E1000_FACTPS); + + if (!(factps & E1000_FACTPS_MNGCG) && + ((fwsm & E1000_FWSM_MODE_MASK) == + (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) { + ret_val = true; + goto out; + } + } else { + if ((manc & E1000_MANC_SMBUS_EN) && + !(manc & E1000_MANC_ASF_EN)) { + ret_val = true; + goto out; + } + } + +out: + return ret_val; +} diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h new file mode 100644 index 00000000000..326b6592307 --- /dev/null +++ b/drivers/net/igb/e1000_mac.h @@ -0,0 +1,98 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_MAC_H_ +#define _E1000_MAC_H_ + +#include "e1000_hw.h" + +#include "e1000_phy.h" +#include "e1000_nvm.h" +#include "e1000_defines.h" + +/* + * Functions that should not be called directly from drivers but can be used + * by other files in this 'shared code' + */ +s32 igb_blink_led(struct e1000_hw *hw); +s32 igb_check_for_copper_link(struct e1000_hw *hw); +s32 igb_cleanup_led(struct e1000_hw *hw); +s32 igb_config_fc_after_link_up(struct e1000_hw *hw); +s32 igb_disable_pcie_master(struct e1000_hw *hw); +s32 igb_force_mac_fc(struct e1000_hw *hw); +s32 igb_get_auto_rd_done(struct e1000_hw *hw); +s32 igb_get_bus_info_pcie(struct e1000_hw *hw); +s32 igb_get_hw_semaphore(struct e1000_hw *hw); +s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +s32 igb_id_led_init(struct e1000_hw *hw); +s32 igb_led_off(struct e1000_hw *hw); +void igb_update_mc_addr_list(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count, + u32 rar_used_count, u32 rar_count); +s32 igb_setup_link(struct e1000_hw *hw); +s32 igb_validate_mdi_setting(struct e1000_hw *hw); +s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, + u32 offset, u8 data); + +void igb_clear_hw_cntrs_base(struct e1000_hw *hw); +void igb_clear_vfta(struct e1000_hw *hw); +void igb_config_collision_dist(struct e1000_hw *hw); +void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); +void igb_put_hw_semaphore(struct e1000_hw *hw); +void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); +s32 igb_check_alt_mac_addr(struct e1000_hw *hw); +void igb_remove_device(struct e1000_hw *hw); +void igb_reset_adaptive(struct e1000_hw *hw); +void igb_update_adaptive(struct e1000_hw *hw); +void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value); + +bool igb_enable_mng_pass_thru(struct e1000_hw *hw); + +enum e1000_mng_mode { + e1000_mng_mode_none = 0, + e1000_mng_mode_asf, + e1000_mng_mode_pt, + e1000_mng_mode_ipmi, + e1000_mng_mode_host_if_only +}; + +#define E1000_FACTPS_MNGCG 0x20000000 + +#define E1000_FWSM_MODE_MASK 0xE +#define E1000_FWSM_MODE_SHIFT 1 + +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 + +#define E1000_HICR_EN 0x01 /* Enable bit - RO */ +/* Driver sets this bit when done to put command in RAM */ +#define E1000_HICR_C 0x02 + +extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); + +#endif diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c new file mode 100644 index 00000000000..2897106fee9 --- /dev/null +++ b/drivers/net/igb/e1000_nvm.c @@ -0,0 +1,605 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/if_ether.h> +#include <linux/delay.h> + +#include "e1000_mac.h" +#include "e1000_nvm.h" + +/** + * e1000_raise_eec_clk - Raise EEPROM clock + * @hw: pointer to the HW structure + * @eecd: pointer to the EEPROM + * + * Enable/Raise the EEPROM clock bit. + **/ +static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) +{ + *eecd = *eecd | E1000_EECD_SK; + wr32(E1000_EECD, *eecd); + wrfl(); + udelay(hw->nvm.delay_usec); +} + +/** + * e1000_lower_eec_clk - Lower EEPROM clock + * @hw: pointer to the HW structure + * @eecd: pointer to the EEPROM + * + * Clear/Lower the EEPROM clock bit. + **/ +static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) +{ + *eecd = *eecd & ~E1000_EECD_SK; + wr32(E1000_EECD, *eecd); + wrfl(); + udelay(hw->nvm.delay_usec); +} + +/** + * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM + * @hw: pointer to the HW structure + * @data: data to send to the EEPROM + * @count: number of bits to shift out + * + * We need to shift 'count' bits out to the EEPROM. So, the value in the + * "data" parameter will be shifted out to the EEPROM one bit at a time. + * In order to do this, "data" must be broken down into bits. + **/ +static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = rd32(E1000_EECD); + u32 mask; + + mask = 0x01 << (count - 1); + if (nvm->type == e1000_nvm_eeprom_microwire) + eecd &= ~E1000_EECD_DO; + else if (nvm->type == e1000_nvm_eeprom_spi) + eecd |= E1000_EECD_DO; + + do { + eecd &= ~E1000_EECD_DI; + + if (data & mask) + eecd |= E1000_EECD_DI; + + wr32(E1000_EECD, eecd); + wrfl(); + + udelay(nvm->delay_usec); + + igb_raise_eec_clk(hw, &eecd); + igb_lower_eec_clk(hw, &eecd); + + mask >>= 1; + } while (mask); + + eecd &= ~E1000_EECD_DI; + wr32(E1000_EECD, eecd); +} + +/** + * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM + * @hw: pointer to the HW structure + * @count: number of bits to shift in + * + * In order to read a register from the EEPROM, we need to shift 'count' bits + * in from the EEPROM. Bits are "shifted in" by raising the clock input to + * the EEPROM (setting the SK bit), and then reading the value of the data out + * "DO" bit. During this "shifting in" process the data in "DI" bit should + * always be clear. + **/ +static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count) +{ + u32 eecd; + u32 i; + u16 data; + + eecd = rd32(E1000_EECD); + + eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); + data = 0; + + for (i = 0; i < count; i++) { + data <<= 1; + igb_raise_eec_clk(hw, &eecd); + + eecd = rd32(E1000_EECD); + + eecd &= ~E1000_EECD_DI; + if (eecd & E1000_EECD_DO) + data |= 1; + + igb_lower_eec_clk(hw, &eecd); + } + + return data; +} + +/** + * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion + * @hw: pointer to the HW structure + * @ee_reg: EEPROM flag for polling + * + * Polls the EEPROM status bit for either read or write completion based + * upon the value of 'ee_reg'. + **/ +static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) +{ + u32 attempts = 100000; + u32 i, reg = 0; + s32 ret_val = -E1000_ERR_NVM; + + for (i = 0; i < attempts; i++) { + if (ee_reg == E1000_NVM_POLL_READ) + reg = rd32(E1000_EERD); + else + reg = rd32(E1000_EEWR); + + if (reg & E1000_NVM_RW_REG_DONE) { + ret_val = 0; + break; + } + + udelay(5); + } + + return ret_val; +} + +/** + * e1000_acquire_nvm - Generic request for access to EEPROM + * @hw: pointer to the HW structure + * + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -E1000_ERR_NVM (-1). + **/ +s32 igb_acquire_nvm(struct e1000_hw *hw) +{ + u32 eecd = rd32(E1000_EECD); + s32 timeout = E1000_NVM_GRANT_ATTEMPTS; + s32 ret_val = 0; + + + wr32(E1000_EECD, eecd | E1000_EECD_REQ); + eecd = rd32(E1000_EECD); + + while (timeout) { + if (eecd & E1000_EECD_GNT) + break; + udelay(5); + eecd = rd32(E1000_EECD); + timeout--; + } + + if (!timeout) { + eecd &= ~E1000_EECD_REQ; + wr32(E1000_EECD, eecd); + hw_dbg(hw, "Could not acquire NVM grant\n"); + ret_val = -E1000_ERR_NVM; + } + + return ret_val; +} + +/** + * e1000_standby_nvm - Return EEPROM to standby state + * @hw: pointer to the HW structure + * + * Return the EEPROM to a standby state. + **/ +static void igb_standby_nvm(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = rd32(E1000_EECD); + + if (nvm->type == e1000_nvm_eeprom_microwire) { + eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); + wr32(E1000_EECD, eecd); + wrfl(); + udelay(nvm->delay_usec); + + igb_raise_eec_clk(hw, &eecd); + + /* Select EEPROM */ + eecd |= E1000_EECD_CS; + wr32(E1000_EECD, eecd); + wrfl(); + udelay(nvm->delay_usec); + + igb_lower_eec_clk(hw, &eecd); + } else if (nvm->type == e1000_nvm_eeprom_spi) { + /* Toggle CS to flush commands */ + eecd |= E1000_EECD_CS; + wr32(E1000_EECD, eecd); + wrfl(); + udelay(nvm->delay_usec); + eecd &= ~E1000_EECD_CS; + wr32(E1000_EECD, eecd); + wrfl(); + udelay(nvm->delay_usec); + } +} + +/** + * e1000_stop_nvm - Terminate EEPROM command + * @hw: pointer to the HW structure + * + * Terminates the current command by inverting the EEPROM's chip select pin. + **/ +static void e1000_stop_nvm(struct e1000_hw *hw) +{ + u32 eecd; + + eecd = rd32(E1000_EECD); + if (hw->nvm.type == e1000_nvm_eeprom_spi) { + /* Pull CS high */ + eecd |= E1000_EECD_CS; + igb_lower_eec_clk(hw, &eecd); + } else if (hw->nvm.type == e1000_nvm_eeprom_microwire) { + /* CS on Microcwire is active-high */ + eecd &= ~(E1000_EECD_CS | E1000_EECD_DI); + wr32(E1000_EECD, eecd); + igb_raise_eec_clk(hw, &eecd); + igb_lower_eec_clk(hw, &eecd); + } +} + +/** + * e1000_release_nvm - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit. + **/ +void igb_release_nvm(struct e1000_hw *hw) +{ + u32 eecd; + + e1000_stop_nvm(hw); + + eecd = rd32(E1000_EECD); + eecd &= ~E1000_EECD_REQ; + wr32(E1000_EECD, eecd); +} + +/** + * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write + * @hw: pointer to the HW structure + * + * Setups the EEPROM for reading and writing. + **/ +static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = rd32(E1000_EECD); + s32 ret_val = 0; + u16 timeout = 0; + u8 spi_stat_reg; + + + if (nvm->type == e1000_nvm_eeprom_microwire) { + /* Clear SK and DI */ + eecd &= ~(E1000_EECD_DI | E1000_EECD_SK); + wr32(E1000_EECD, eecd); + /* Set CS */ + eecd |= E1000_EECD_CS; + wr32(E1000_EECD, eecd); + } else if (nvm->type == e1000_nvm_eeprom_spi) { + /* Clear SK and CS */ + eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); + wr32(E1000_EECD, eecd); + udelay(1); + timeout = NVM_MAX_RETRY_SPI; + + /* + * Read "Status Register" repeatedly until the LSB is cleared. + * The EEPROM will signal that the command has been completed + * by clearing bit 0 of the internal status register. If it's + * not cleared within 'timeout', then error out. + */ + while (timeout) { + igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, + hw->nvm.opcode_bits); + spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8); + if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) + break; + + udelay(5); + igb_standby_nvm(hw); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "SPI NVM Status error\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + } + +out: + return ret_val; +} + +/** + * e1000_read_nvm_eerd - Reads EEPROM using EERD register + * @hw: pointer to the HW structure + * @offset: offset of word in the EEPROM to read + * @words: number of words to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i, eerd = 0; + s32 ret_val = 0; + + /* + * A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + + for (i = 0; i < words; i++) { + eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + + E1000_NVM_RW_REG_START; + + wr32(E1000_EERD, eerd); + ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); + if (ret_val) + break; + + data[i] = (rd32(E1000_EERD) >> + E1000_NVM_RW_REG_DATA); + } + +out: + return ret_val; +} + +/** + * e1000_write_nvm_spi - Write to EEPROM using SPI + * @hw: pointer to the HW structure + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the EEPROM + * + * Writes data to EEPROM at offset using SPI interface. + * + * If e1000_update_nvm_checksum is not called after this function , the + * EEPROM will most likley contain an invalid checksum. + **/ +s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + s32 ret_val; + u16 widx = 0; + + /* + * A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + + ret_val = hw->nvm.ops.acquire_nvm(hw); + if (ret_val) + goto out; + + msleep(10); + + while (widx < words) { + u8 write_opcode = NVM_WRITE_OPCODE_SPI; + + ret_val = igb_ready_nvm_eeprom(hw); + if (ret_val) + goto release; + + igb_standby_nvm(hw); + + /* Send the WRITE ENABLE command (8 bit opcode) */ + igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, + nvm->opcode_bits); + + igb_standby_nvm(hw); + + /* + * Some SPI eeproms use the 8th address bit embedded in the + * opcode + */ + if ((nvm->address_bits == 8) && (offset >= 128)) + write_opcode |= NVM_A8_OPCODE_SPI; + + /* Send the Write command (8-bit opcode + addr) */ + igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); + igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), + nvm->address_bits); + + /* Loop to allow for up to whole page write of eeprom */ + while (widx < words) { + u16 word_out = data[widx]; + word_out = (word_out >> 8) | (word_out << 8); + igb_shift_out_eec_bits(hw, word_out, 16); + widx++; + + if ((((offset + widx) * 2) % nvm->page_size) == 0) { + igb_standby_nvm(hw); + break; + } + } + } + + msleep(10); +release: + hw->nvm.ops.release_nvm(hw); + +out: + return ret_val; +} + +/** + * e1000_read_part_num - Read device part number + * @hw: pointer to the HW structure + * @part_num: pointer to device part number + * + * Reads the product board assembly (PBA) number from the EEPROM and stores + * the value in part_num. + **/ +s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num) +{ + s32 ret_val; + u16 nvm_data; + + ret_val = hw->nvm.ops.read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + goto out; + } + *part_num = (u32)(nvm_data << 16); + + ret_val = hw->nvm.ops.read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + goto out; + } + *part_num |= nvm_data; + +out: + return ret_val; +} + +/** + * e1000_read_mac_addr - Read device MAC address + * @hw: pointer to the HW structure + * + * Reads the device MAC address from the EEPROM and stores the value. + * Since devices with two ports use the same EEPROM, we increment the + * last bit in the MAC address for the second port. + **/ +s32 igb_read_mac_addr(struct e1000_hw *hw) +{ + s32 ret_val = 0; + u16 offset, nvm_data, i; + + for (i = 0; i < ETH_ALEN; i += 2) { + offset = i >> 1; + ret_val = hw->nvm.ops.read_nvm(hw, offset, 1, &nvm_data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + goto out; + } + hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF); + hw->mac.perm_addr[i+1] = (u8)(nvm_data >> 8); + } + + /* Flip last bit of mac address if we're on second port */ + if (hw->bus.func == E1000_FUNC_1) + hw->mac.perm_addr[5] ^= 1; + + for (i = 0; i < ETH_ALEN; i++) + hw->mac.addr[i] = hw->mac.perm_addr[i]; + +out: + return ret_val; +} + +/** + * e1000_validate_nvm_checksum - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +s32 igb_validate_nvm_checksum(struct e1000_hw *hw) +{ + s32 ret_val = 0; + u16 checksum = 0; + u16 i, nvm_data; + + for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { + ret_val = hw->nvm.ops.read_nvm(hw, i, 1, &nvm_data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + goto out; + } + checksum += nvm_data; + } + + if (checksum != (u16) NVM_SUM) { + hw_dbg(hw, "NVM Checksum Invalid\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_update_nvm_checksum - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. + **/ +s32 igb_update_nvm_checksum(struct e1000_hw *hw) +{ + s32 ret_val; + u16 checksum = 0; + u16 i, nvm_data; + + for (i = 0; i < NVM_CHECKSUM_REG; i++) { + ret_val = hw->nvm.ops.read_nvm(hw, i, 1, &nvm_data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (u16) NVM_SUM - checksum; + ret_val = hw->nvm.ops.write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum); + if (ret_val) + hw_dbg(hw, "NVM Write Error while updating checksum.\n"); + +out: + return ret_val; +} + diff --git a/drivers/net/igb/e1000_nvm.h b/drivers/net/igb/e1000_nvm.h new file mode 100644 index 00000000000..1041c34dcbe --- /dev/null +++ b/drivers/net/igb/e1000_nvm.h @@ -0,0 +1,40 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_NVM_H_ +#define _E1000_NVM_H_ + +s32 igb_acquire_nvm(struct e1000_hw *hw); +void igb_release_nvm(struct e1000_hw *hw); +s32 igb_read_mac_addr(struct e1000_hw *hw); +s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num); +s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 igb_validate_nvm_checksum(struct e1000_hw *hw); +s32 igb_update_nvm_checksum(struct e1000_hw *hw); + +#endif diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c new file mode 100644 index 00000000000..08a86b10722 --- /dev/null +++ b/drivers/net/igb/e1000_phy.c @@ -0,0 +1,1807 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/if_ether.h> +#include <linux/delay.h> + +#include "e1000_mac.h" +#include "e1000_phy.h" + +static s32 igb_get_phy_cfg_done(struct e1000_hw *hw); +static void igb_release_phy(struct e1000_hw *hw); +static s32 igb_acquire_phy(struct e1000_hw *hw); +static s32 igb_phy_reset_dsp(struct e1000_hw *hw); +static s32 igb_phy_setup_autoneg(struct e1000_hw *hw); +static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, + u16 *phy_ctrl); +static s32 igb_wait_autoneg(struct e1000_hw *hw); + +/* Cable length tables */ +static const u16 e1000_m88_cable_length_table[] = + { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; +#define M88E1000_CABLE_LENGTH_TABLE_SIZE \ + (sizeof(e1000_m88_cable_length_table) / \ + sizeof(e1000_m88_cable_length_table[0])) + +static const u16 e1000_igp_2_cable_length_table[] = + { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, + 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, + 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, + 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, + 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, + 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, + 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, + 104, 109, 114, 118, 121, 124}; +#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ + (sizeof(e1000_igp_2_cable_length_table) / \ + sizeof(e1000_igp_2_cable_length_table[0])) + +/** + * e1000_check_reset_block - Check if PHY reset is blocked + * @hw: pointer to the HW structure + * + * Read the PHY management control register and check whether a PHY reset + * is blocked. If a reset is not blocked return 0, otherwise + * return E1000_BLK_PHY_RESET (12). + **/ +s32 igb_check_reset_block(struct e1000_hw *hw) +{ + u32 manc; + + manc = rd32(E1000_MANC); + + return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? + E1000_BLK_PHY_RESET : 0; +} + +/** + * e1000_get_phy_id - Retrieve the PHY ID and revision + * @hw: pointer to the HW structure + * + * Reads the PHY registers and stores the PHY ID and possibly the PHY + * revision in the hardware structure. + **/ +s32 igb_get_phy_id(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 phy_id; + + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_ID1, &phy_id); + if (ret_val) + goto out; + + phy->id = (u32)(phy_id << 16); + udelay(20); + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_ID2, &phy_id); + if (ret_val) + goto out; + + phy->id |= (u32)(phy_id & PHY_REVISION_MASK); + phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); + +out: + return ret_val; +} + +/** + * e1000_phy_reset_dsp - Reset PHY DSP + * @hw: pointer to the HW structure + * + * Reset the digital signal processor. + **/ +static s32 igb_phy_reset_dsp(struct e1000_hw *hw) +{ + s32 ret_val; + + ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1); + if (ret_val) + goto out; + + ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0); + +out: + return ret_val; +} + +/** + * e1000_read_phy_reg_mdic - Read MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the MDI control regsiter in the PHY at offset and stores the + * information read to data. + **/ +static s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, mdic = 0; + s32 ret_val = 0; + + if (offset > MAX_PHY_REG_ADDRESS) { + hw_dbg(hw, "PHY Address %d is out of range\n", offset); + ret_val = -E1000_ERR_PARAM; + goto out; + } + + /* + * Set up Op-code, Phy Address, and register offset in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + mdic = ((offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_READ)); + + wr32(E1000_MDIC, mdic); + + /* + * Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { + udelay(50); + mdic = rd32(E1000_MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + hw_dbg(hw, "MDI Read did not complete\n"); + ret_val = -E1000_ERR_PHY; + goto out; + } + if (mdic & E1000_MDIC_ERROR) { + hw_dbg(hw, "MDI Error\n"); + ret_val = -E1000_ERR_PHY; + goto out; + } + *data = (u16) mdic; + +out: + return ret_val; +} + +/** + * e1000_write_phy_reg_mdic - Write MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write to register at offset + * + * Writes data to MDI control register in the PHY at offset. + **/ +static s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, mdic = 0; + s32 ret_val = 0; + + if (offset > MAX_PHY_REG_ADDRESS) { + hw_dbg(hw, "PHY Address %d is out of range\n", offset); + ret_val = -E1000_ERR_PARAM; + goto out; + } + + /* + * Set up Op-code, Phy Address, and register offset in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + mdic = (((u32)data) | + (offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_WRITE)); + + wr32(E1000_MDIC, mdic); + + /* + * Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { + udelay(50); + mdic = rd32(E1000_MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + hw_dbg(hw, "MDI Write did not complete\n"); + ret_val = -E1000_ERR_PHY; + goto out; + } + if (mdic & E1000_MDIC_ERROR) { + hw_dbg(hw, "MDI Error\n"); + ret_val = -E1000_ERR_PHY; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_read_phy_reg_igp - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore, if necessary, then reads the PHY register at offset + * and storing the retrieved information in data. Release any acquired + * semaphores before exiting. + **/ +s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + + ret_val = igb_acquire_phy(hw); + if (ret_val) + goto out; + + if (offset > MAX_PHY_MULTI_PAGE_REG) { + ret_val = igb_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); + if (ret_val) { + igb_release_phy(hw); + goto out; + } + } + + ret_val = igb_read_phy_reg_mdic(hw, + MAX_PHY_REG_ADDRESS & offset, + data); + + igb_release_phy(hw); + +out: + return ret_val; +} + +/** + * e1000_write_phy_reg_igp - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + + ret_val = igb_acquire_phy(hw); + if (ret_val) + goto out; + + if (offset > MAX_PHY_MULTI_PAGE_REG) { + ret_val = igb_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); + if (ret_val) { + igb_release_phy(hw); + goto out; + } + } + + ret_val = igb_write_phy_reg_mdic(hw, + MAX_PHY_REG_ADDRESS & offset, + data); + + igb_release_phy(hw); + +out: + return ret_val; +} + +/** + * e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock + * and downshift values are set also. + **/ +s32 igb_copper_link_setup_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + + if (phy->reset_disable) { + ret_val = 0; + goto out; + } + + /* Enable CRS on TX. This must be set for half-duplex operation. */ + ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + goto out; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + + /* + * Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (phy->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* + * Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if (phy->disable_polarity_correction == 1) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + + ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + goto out; + + if (phy->revision < E1000_REVISION_4) { + /* + * Force TX_CLK in the Extended PHY Specific Control Register + * to 25MHz clock. + */ + ret_val = hw->phy.ops.read_phy_reg(hw, + M88E1000_EXT_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + goto out; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + + if ((phy->revision == E1000_REVISION_2) && + (phy->id == M88E1111_I_PHY_ID)) { + /* 82573L PHY - set the downshift counter to 5x. */ + phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK; + phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X; + } else { + /* Configure Master and Slave downshift values */ + phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); + phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); + } + ret_val = hw->phy.ops.write_phy_reg(hw, + M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + goto out; + } + + /* Commit the changes. */ + ret_val = igb_phy_sw_reset(hw); + if (ret_val) { + hw_dbg(hw, "Error committing the PHY changes\n"); + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_copper_link_setup_igp - Setup igp PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for + * igp PHY's. + **/ +s32 igb_copper_link_setup_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + if (phy->reset_disable) { + ret_val = 0; + goto out; + } + + ret_val = hw->phy.ops.reset_phy(hw); + if (ret_val) { + hw_dbg(hw, "Error resetting the PHY.\n"); + goto out; + } + + /* Wait 15ms for MAC to configure PHY from NVM settings. */ + msleep(15); + + /* + * The NVM settings will configure LPLU in D3 for + * non-IGP1 PHYs. + */ + if (phy->type == e1000_phy_igp) { + /* disable lplu d3 during driver init */ + if (hw->phy.ops.set_d3_lplu_state) + ret_val = hw->phy.ops.set_d3_lplu_state(hw, false); + if (ret_val) { + hw_dbg(hw, "Error Disabling LPLU D3\n"); + goto out; + } + } + + /* disable lplu d0 during driver init */ + ret_val = hw->phy.ops.set_d0_lplu_state(hw, false); + if (ret_val) { + hw_dbg(hw, "Error Disabling LPLU D0\n"); + goto out; + } + /* Configure mdi-mdix settings */ + ret_val = hw->phy.ops.read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data); + if (ret_val) + goto out; + + data &= ~IGP01E1000_PSCR_AUTO_MDIX; + + switch (phy->mdix) { + case 1: + data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 2: + data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 0: + default: + data |= IGP01E1000_PSCR_AUTO_MDIX; + break; + } + ret_val = hw->phy.ops.write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, data); + if (ret_val) + goto out; + + /* set auto-master slave resolution settings */ + if (hw->mac.autoneg) { + /* + * when autonegotiation advertisement is only 1000Mbps then we + * should disable SmartSpeed and enable Auto MasterSlave + * resolution as hardware default. + */ + if (phy->autoneg_advertised == ADVERTISE_1000_FULL) { + /* Disable SmartSpeed */ + ret_val = hw->phy.ops.read_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = hw->phy.ops.write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + + /* Set auto Master/Slave resolution process */ + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_1000T_CTRL, + &data); + if (ret_val) + goto out; + + data &= ~CR_1000T_MS_ENABLE; + ret_val = hw->phy.ops.write_phy_reg(hw, PHY_1000T_CTRL, + data); + if (ret_val) + goto out; + } + + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_1000T_CTRL, &data); + if (ret_val) + goto out; + + /* load defaults for future use */ + phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ? + ((data & CR_1000T_MS_VALUE) ? + e1000_ms_force_master : + e1000_ms_force_slave) : + e1000_ms_auto; + + switch (phy->ms_type) { + case e1000_ms_force_master: + data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + break; + case e1000_ms_force_slave: + data |= CR_1000T_MS_ENABLE; + data &= ~(CR_1000T_MS_VALUE); + break; + case e1000_ms_auto: + data &= ~CR_1000T_MS_ENABLE; + default: + break; + } + ret_val = hw->phy.ops.write_phy_reg(hw, PHY_1000T_CTRL, data); + if (ret_val) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link + * @hw: pointer to the HW structure + * + * Performs initial bounds checking on autoneg advertisement parameter, then + * configure to advertise the full capability. Setup the PHY to autoneg + * and restart the negotiation process between the link partner. If + * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. + **/ +s32 igb_copper_link_autoneg(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_ctrl; + + /* + * Perform some bounds checking on the autoneg advertisement + * parameter. + */ + phy->autoneg_advertised &= phy->autoneg_mask; + + /* + * If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if (phy->autoneg_advertised == 0) + phy->autoneg_advertised = phy->autoneg_mask; + + hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n"); + ret_val = igb_phy_setup_autoneg(hw); + if (ret_val) { + hw_dbg(hw, "Error Setting up Auto-Negotiation\n"); + goto out; + } + hw_dbg(hw, "Restarting Auto-Neg\n"); + + /* + * Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + goto out; + + phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + goto out; + + /* + * Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if (phy->autoneg_wait_to_complete) { + ret_val = igb_wait_autoneg(hw); + if (ret_val) { + hw_dbg(hw, "Error while waiting for " + "autoneg to complete\n"); + goto out; + } + } + + hw->mac.get_link_status = true; + +out: + return ret_val; +} + +/** + * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation + * @hw: pointer to the HW structure + * + * Reads the MII auto-neg advertisement register and/or the 1000T control + * register and if the PHY is already setup for auto-negotiation, then + * return successful. Otherwise, setup advertisement and flow control to + * the appropriate values for the wanted auto-negotiation. + **/ +static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg = 0; + + phy->autoneg_advertised &= phy->autoneg_mask; + + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_AUTONEG_ADV, + &mii_autoneg_adv_reg); + if (ret_val) + goto out; + + if (phy->autoneg_mask & ADVERTISE_1000_FULL) { + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = hw->phy.ops.read_phy_reg(hw, + PHY_1000T_CTRL, + &mii_1000t_ctrl_reg); + if (ret_val) + goto out; + } + + /* + * Need to parse both autoneg_advertised and fc and set up + * the appropriate PHY registers. First we will parse for + * autoneg_advertised software override. Since we can advertise + * a plethora of combinations, we need to check each bit + * individually. + */ + + /* + * First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | + NWAY_AR_100TX_HD_CAPS | + NWAY_AR_10T_FD_CAPS | + NWAY_AR_10T_HD_CAPS); + mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); + + hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised); + + /* Do we want to advertise 10 Mb Half Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_10_HALF) { + hw_dbg(hw, "Advertise 10mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; + } + + /* Do we want to advertise 10 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_10_FULL) { + hw_dbg(hw, "Advertise 10mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; + } + + /* Do we want to advertise 100 Mb Half Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_100_HALF) { + hw_dbg(hw, "Advertise 100mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; + } + + /* Do we want to advertise 100 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_100_FULL) { + hw_dbg(hw, "Advertise 100mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; + } + + /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ + if (phy->autoneg_advertised & ADVERTISE_1000_HALF) + hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n"); + + /* Do we want to advertise 1000 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { + hw_dbg(hw, "Advertise 1000mb Full duplex\n"); + mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; + } + + /* + * Check for a software override of the flow control settings, and + * setup the PHY advertisement registers accordingly. If + * auto-negotiation is enabled, then software will have to set the + * "PAUSE" bits to the correct value in the Auto-Negotiation + * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto- + * negotiation. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * but we do not support receiving pause frames). + * 3: Both Rx and TX flow control (symmetric) are enabled. + * other: No software override. The flow control configuration + * in the EEPROM is used. + */ + switch (hw->fc.type) { + case e1000_fc_none: + /* + * Flow control (RX & TX) is completely disabled by a + * software over-ride. + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case e1000_fc_rx_pause: + /* + * RX Flow control is enabled, and TX Flow control is + * disabled, by a software over-ride. + * + * Since there really isn't a way to advertise that we are + * capable of RX Pause ONLY, we will advertise that we + * support both symmetric and asymmetric RX PAUSE. Later + * (in e1000_config_fc_after_link_up) we will disable the + * hw's ability to send PAUSE frames. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case e1000_fc_tx_pause: + /* + * TX Flow control is enabled, and RX Flow control is + * disabled, by a software over-ride. + */ + mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; + mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; + break; + case e1000_fc_full: + /* + * Flow control (both RX and TX) is enabled by a software + * over-ride. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + ret_val = hw->phy.ops.write_phy_reg(hw, PHY_AUTONEG_ADV, + mii_autoneg_adv_reg); + if (ret_val) + goto out; + + hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); + + if (phy->autoneg_mask & ADVERTISE_1000_FULL) { + ret_val = hw->phy.ops.write_phy_reg(hw, + PHY_1000T_CTRL, + mii_1000t_ctrl_reg); + if (ret_val) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. Clears the + * auto-crossover to force MDI manually. Waits for link and returns + * successful if link up is successful, else -E1000_ERR_PHY (-2). + **/ +s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + goto out; + + igb_phy_force_speed_duplex_setup(hw, &phy_data); + + ret_val = hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + goto out; + + /* + * Clear Auto-Crossover to force MDI manually. IGP requires MDI + * forced whenever speed and duplex are forced. + */ + ret_val = hw->phy.ops.read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, + &phy_data); + if (ret_val) + goto out; + + phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; + phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + + ret_val = hw->phy.ops.write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, + phy_data); + if (ret_val) + goto out; + + hw_dbg(hw, "IGP PSCR: %X\n", phy_data); + + udelay(1); + + if (phy->autoneg_wait_to_complete) { + hw_dbg(hw, + "Waiting for forced speed/duplex link on IGP phy.\n"); + + ret_val = igb_phy_has_link(hw, + PHY_FORCE_LIMIT, + 100000, + &link); + if (ret_val) + goto out; + + if (!link) + hw_dbg(hw, "Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = igb_phy_has_link(hw, + PHY_FORCE_LIMIT, + 100000, + &link); + if (ret_val) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. Clears the + * auto-crossover to force MDI manually. Resets the PHY to commit the + * changes. If time expires while waiting for link up, we reset the DSP. + * After reset, TX_CLK and CRS on TX must be set. Return successful upon + * successful completion, else return corresponding error code. + **/ +s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + /* + * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI + * forced whenever speed and duplex are forced. + */ + ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + goto out; + + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + goto out; + + hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data); + + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + goto out; + + igb_phy_force_speed_duplex_setup(hw, &phy_data); + + /* Reset the phy to commit changes. */ + phy_data |= MII_CR_RESET; + + ret_val = hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + goto out; + + udelay(1); + + if (phy->autoneg_wait_to_complete) { + hw_dbg(hw, + "Waiting for forced speed/duplex link on M88 phy.\n"); + + ret_val = igb_phy_has_link(hw, + PHY_FORCE_LIMIT, + 100000, + &link); + if (ret_val) + goto out; + + if (!link) { + /* + * We didn't get link. + * Reset the DSP and cross our fingers. + */ + ret_val = hw->phy.ops.write_phy_reg(hw, + M88E1000_PHY_PAGE_SELECT, + 0x001d); + if (ret_val) + goto out; + ret_val = igb_phy_reset_dsp(hw); + if (ret_val) + goto out; + } + + /* Try once more */ + ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + goto out; + } + + ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + goto out; + + /* + * Resetting the phy means we need to re-force TX_CLK in the + * Extended PHY Specific Control Register to 25MHz clock from + * the reset value of 2.5MHz. + */ + phy_data |= M88E1000_EPSCR_TX_CLK_25; + ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + goto out; + + /* + * In addition, we must re-enable CRS on Tx for both half and full + * duplex. + */ + ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + goto out; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, + phy_data); + +out: + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex + * @hw: pointer to the HW structure + * @phy_ctrl: pointer to current value of PHY_CONTROL + * + * Forces speed and duplex on the PHY by doing the following: disable flow + * control, force speed/duplex on the MAC, disable auto speed detection, + * disable auto-negotiation, configure duplex, configure speed, configure + * the collision distance, write configuration to CTRL register. The + * caller must write to the PHY_CONTROL register for these settings to + * take affect. + **/ +static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, + u16 *phy_ctrl) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 ctrl; + + /* Turn off flow control when forcing speed/duplex */ + hw->fc.type = e1000_fc_none; + + /* Force speed/duplex on the mac */ + ctrl = rd32(E1000_CTRL); + ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ctrl &= ~E1000_CTRL_SPD_SEL; + + /* Disable Auto Speed Detection */ + ctrl &= ~E1000_CTRL_ASDE; + + /* Disable autoneg on the phy */ + *phy_ctrl &= ~MII_CR_AUTO_NEG_EN; + + /* Forcing Full or Half Duplex? */ + if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { + ctrl &= ~E1000_CTRL_FD; + *phy_ctrl &= ~MII_CR_FULL_DUPLEX; + hw_dbg(hw, "Half Duplex\n"); + } else { + ctrl |= E1000_CTRL_FD; + *phy_ctrl |= MII_CR_FULL_DUPLEX; + hw_dbg(hw, "Full Duplex\n"); + } + + /* Forcing 10mb or 100mb? */ + if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) { + ctrl |= E1000_CTRL_SPD_100; + *phy_ctrl |= MII_CR_SPEED_100; + *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); + hw_dbg(hw, "Forcing 100mb\n"); + } else { + ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); + *phy_ctrl |= MII_CR_SPEED_10; + *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); + hw_dbg(hw, "Forcing 10mb\n"); + } + + igb_config_collision_dist(hw); + + wr32(E1000_CTRL, ctrl); +} + +/** + * e1000_set_d3_lplu_state - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D3 + * and SmartSpeed is disabled when active is true, else clear lplu for D3 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. + **/ +s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + ret_val = hw->phy.ops.read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + &data); + if (ret_val) + goto out; + + if (!active) { + data &= ~IGP02E1000_PM_D3_LPLU; + ret_val = hw->phy.ops.write_phy_reg(hw, + IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + goto out; + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) { + ret_val = hw->phy.ops.read_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = hw->phy.ops.write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } else if (phy->smart_speed == e1000_smart_speed_off) { + ret_val = hw->phy.ops.read_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = hw->phy.ops.write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } + } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || + (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || + (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { + data |= IGP02E1000_PM_D3_LPLU; + ret_val = hw->phy.ops.write_phy_reg(hw, + IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + goto out; + + /* When LPLU is enabled, we should disable SmartSpeed */ + ret_val = hw->phy.ops.read_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = hw->phy.ops.write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + } + +out: + return ret_val; +} + +/** + * e1000_check_downshift - Checks whether a downshift in speed occured + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns 1 + * + * A downshift is detected by querying the PHY link health. + **/ +s32 igb_check_downshift(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, offset, mask; + + switch (phy->type) { + case e1000_phy_m88: + case e1000_phy_gg82563: + offset = M88E1000_PHY_SPEC_STATUS; + mask = M88E1000_PSSR_DOWNSHIFT; + break; + case e1000_phy_igp_2: + case e1000_phy_igp: + case e1000_phy_igp_3: + offset = IGP01E1000_PHY_LINK_HEALTH; + mask = IGP01E1000_PLHR_SS_DOWNGRADE; + break; + default: + /* speed downshift not supported */ + phy->speed_downgraded = false; + ret_val = 0; + goto out; + } + + ret_val = hw->phy.ops.read_phy_reg(hw, offset, &phy_data); + + if (!ret_val) + phy->speed_downgraded = (phy_data & mask) ? true : false; + +out: + return ret_val; +} + +/** + * e1000_check_polarity_m88 - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY specific status register. + **/ +static s32 igb_check_polarity_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &data); + + if (!ret_val) + phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal; + + return ret_val; +} + +/** + * e1000_check_polarity_igp - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY port status register, and the + * current speed (since there is no polarity at 100Mbps). + **/ +static s32 igb_check_polarity_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data, offset, mask; + + /* + * Polarity is determined based on the speed of + * our connection. + */ + ret_val = hw->phy.ops.read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, + &data); + if (ret_val) + goto out; + + if ((data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + offset = IGP01E1000_PHY_PCS_INIT_REG; + mask = IGP01E1000_PHY_POLARITY_MASK; + } else { + /* + * This really only applies to 10Mbps since + * there is no polarity for 100Mbps (always 0). + */ + offset = IGP01E1000_PHY_PORT_STATUS; + mask = IGP01E1000_PSSR_POLARITY_REVERSED; + } + + ret_val = hw->phy.ops.read_phy_reg(hw, offset, &data); + + if (!ret_val) + phy->cable_polarity = (data & mask) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal; + +out: + return ret_val; +} + +/** + * e1000_wait_autoneg - Wait for auto-neg compeletion + * @hw: pointer to the HW structure + * + * Waits for auto-negotiation to complete or for the auto-negotiation time + * limit to expire, which ever happens first. + **/ +static s32 igb_wait_autoneg(struct e1000_hw *hw) +{ + s32 ret_val = 0; + u16 i, phy_status; + + /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ + for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_AUTONEG_COMPLETE) + break; + msleep(100); + } + + /* + * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation + * has completed. + */ + return ret_val; +} + +/** + * e1000_phy_has_link - Polls PHY for link + * @hw: pointer to the HW structure + * @iterations: number of times to poll for link + * @usec_interval: delay between polling attempts + * @success: pointer to whether polling was successful or not + * + * Polls the PHY status register for link, 'iterations' number of times. + **/ +s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations, + u32 usec_interval, bool *success) +{ + s32 ret_val = 0; + u16 i, phy_status; + + for (i = 0; i < iterations; i++) { + /* + * Some PHYs require the PHY_STATUS register to be read + * twice due to the link bit being sticky. No harm doing + * it across the board. + */ + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_LINK_STATUS) + break; + if (usec_interval >= 1000) + mdelay(usec_interval/1000); + else + udelay(usec_interval); + } + + *success = (i < iterations) ? true : false; + + return ret_val; +} + +/** + * e1000_get_cable_length_m88 - Determine cable length for m88 PHY + * @hw: pointer to the HW structure + * + * Reads the PHY specific status register to retrieve the cable length + * information. The cable length is determined by averaging the minimum and + * maximum values to get the "average" cable length. The m88 PHY has four + * possible cable length values, which are: + * Register Value Cable Length + * 0 < 50 meters + * 1 50 - 80 meters + * 2 80 - 110 meters + * 3 110 - 140 meters + * 4 > 140 meters + **/ +s32 igb_get_cable_length_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, index; + + ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, + &phy_data); + if (ret_val) + goto out; + + index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT; + phy->min_cable_length = e1000_m88_cable_length_table[index]; + phy->max_cable_length = e1000_m88_cable_length_table[index+1]; + + phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; + +out: + return ret_val; +} + +/** + * e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY + * @hw: pointer to the HW structure + * + * The automatic gain control (agc) normalizes the amplitude of the + * received signal, adjusting for the attenuation produced by the + * cable. By reading the AGC registers, which reperesent the + * cobination of course and fine gain value, the value can be put + * into a lookup table to obtain the approximate cable length + * for each channel. + **/ +s32 igb_get_cable_length_igp_2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 phy_data, i, agc_value = 0; + u16 cur_agc_index, max_agc_index = 0; + u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; + u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = + {IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D}; + + /* Read the AGC registers for all channels */ + for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { + ret_val = hw->phy.ops.read_phy_reg(hw, agc_reg_array[i], + &phy_data); + if (ret_val) + goto out; + + /* + * Getting bits 15:9, which represent the combination of + * course and fine gain values. The result is a number + * that can be put into the lookup table to obtain the + * approximate cable length. + */ + cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & + IGP02E1000_AGC_LENGTH_MASK; + + /* Array index bound check. */ + if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) || + (cur_agc_index == 0)) { + ret_val = -E1000_ERR_PHY; + goto out; + } + + /* Remove min & max AGC values from calculation. */ + if (e1000_igp_2_cable_length_table[min_agc_index] > + e1000_igp_2_cable_length_table[cur_agc_index]) + min_agc_index = cur_agc_index; + if (e1000_igp_2_cable_length_table[max_agc_index] < + e1000_igp_2_cable_length_table[cur_agc_index]) + max_agc_index = cur_agc_index; + + agc_value += e1000_igp_2_cable_length_table[cur_agc_index]; + } + + agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] + + e1000_igp_2_cable_length_table[max_agc_index]); + agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); + + /* Calculate cable length with the error range of +/- 10 meters. */ + phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ? + (agc_value - IGP02E1000_AGC_RANGE) : 0; + phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE; + + phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; + +out: + return ret_val; +} + +/** + * e1000_get_phy_info_m88 - Retrieve PHY information + * @hw: pointer to the HW structure + * + * Valid for only copper links. Read the PHY status register (sticky read) + * to verify that link is up. Read the PHY special control register to + * determine the polarity and 10base-T extended distance. Read the PHY + * special status register to determine MDI/MDIx and current speed. If + * speed is 1000, then determine cable length, local and remote receiver. + **/ +s32 igb_get_phy_info_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + if (hw->phy.media_type != e1000_media_type_copper) { + hw_dbg(hw, "Phy info is only valid for copper media\n"); + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + ret_val = igb_phy_has_link(hw, 1, 0, &link); + if (ret_val) + goto out; + + if (!link) { + hw_dbg(hw, "Phy info is only valid if link is up\n"); + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + goto out; + + phy->polarity_correction = (phy_data & M88E1000_PSCR_POLARITY_REVERSAL) + ? true + : false; + + ret_val = igb_check_polarity_m88(hw); + if (ret_val) + goto out; + + ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, + &phy_data); + if (ret_val) + goto out; + + phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX) ? true : false; + + if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { + ret_val = hw->phy.ops.get_cable_length(hw); + if (ret_val) + goto out; + + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_1000T_STATUS, + &phy_data); + if (ret_val) + goto out; + + phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + /* Set values to "undefined" */ + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + +out: + return ret_val; +} + +/** + * e1000_get_phy_info_igp - Retrieve igp PHY information + * @hw: pointer to the HW structure + * + * Read PHY status to determine if link is up. If link is up, then + * set/determine 10base-T extended distance and polarity correction. Read + * PHY port status to determine MDI/MDIx and speed. Based on the speed, + * determine on the cable length, local and remote receiver. + **/ +s32 igb_get_phy_info_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + ret_val = igb_phy_has_link(hw, 1, 0, &link); + if (ret_val) + goto out; + + if (!link) { + hw_dbg(hw, "Phy info is only valid if link is up\n"); + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + phy->polarity_correction = true; + + ret_val = igb_check_polarity_igp(hw); + if (ret_val) + goto out; + + ret_val = hw->phy.ops.read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, + &data); + if (ret_val) + goto out; + + phy->is_mdix = (data & IGP01E1000_PSSR_MDIX) ? true : false; + + if ((data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + ret_val = hw->phy.ops.get_cable_length(hw); + if (ret_val) + goto out; + + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_1000T_STATUS, + &data); + if (ret_val) + goto out; + + phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + +out: + return ret_val; +} + +/** + * e1000_phy_sw_reset - PHY software reset + * @hw: pointer to the HW structure + * + * Does a software reset of the PHY by reading the PHY control register and + * setting/write the control register reset bit to the PHY. + **/ +s32 igb_phy_sw_reset(struct e1000_hw *hw) +{ + s32 ret_val; + u16 phy_ctrl; + + ret_val = hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + goto out; + + phy_ctrl |= MII_CR_RESET; + ret_val = hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + goto out; + + udelay(1); + +out: + return ret_val; +} + +/** + * e1000_phy_hw_reset - PHY hardware reset + * @hw: pointer to the HW structure + * + * Verify the reset block is not blocking us from resetting. Acquire + * semaphore (if necessary) and read/set/write the device control reset + * bit in the PHY. Wait the appropriate delay time for the device to + * reset and relase the semaphore (if necessary). + **/ +s32 igb_phy_hw_reset(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u32 ctrl; + + ret_val = igb_check_reset_block(hw); + if (ret_val) { + ret_val = 0; + goto out; + } + + ret_val = igb_acquire_phy(hw); + if (ret_val) + goto out; + + ctrl = rd32(E1000_CTRL); + wr32(E1000_CTRL, ctrl | E1000_CTRL_PHY_RST); + wrfl(); + + udelay(phy->reset_delay_us); + + wr32(E1000_CTRL, ctrl); + wrfl(); + + udelay(150); + + igb_release_phy(hw); + + ret_val = igb_get_phy_cfg_done(hw); + +out: + return ret_val; +} + +/* Internal function pointers */ + +/** + * e1000_get_phy_cfg_done - Generic PHY configuration done + * @hw: pointer to the HW structure + * + * Return success if silicon family did not implement a family specific + * get_cfg_done function. + **/ +static s32 igb_get_phy_cfg_done(struct e1000_hw *hw) +{ + if (hw->phy.ops.get_cfg_done) + return hw->phy.ops.get_cfg_done(hw); + + return 0; +} + +/** + * e1000_release_phy - Generic release PHY + * @hw: pointer to the HW structure + * + * Return if silicon family does not require a semaphore when accessing the + * PHY. + **/ +static void igb_release_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.release_phy) + hw->phy.ops.release_phy(hw); +} + +/** + * e1000_acquire_phy - Generic acquire PHY + * @hw: pointer to the HW structure + * + * Return success if silicon family does not require a semaphore when + * accessing the PHY. + **/ +static s32 igb_acquire_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.acquire_phy) + return hw->phy.ops.acquire_phy(hw); + + return 0; +} + +/** + * e1000_phy_force_speed_duplex - Generic force PHY speed/duplex + * @hw: pointer to the HW structure + * + * When the silicon family has not implemented a forced speed/duplex + * function for the PHY, simply return 0. + **/ +s32 igb_phy_force_speed_duplex(struct e1000_hw *hw) +{ + if (hw->phy.ops.force_speed_duplex) + return hw->phy.ops.force_speed_duplex(hw); + + return 0; +} + +/** + * e1000_phy_init_script_igp3 - Inits the IGP3 PHY + * @hw: pointer to the HW structure + * + * Initializes a Intel Gigabit PHY3 when an EEPROM is not present. + **/ +s32 igb_phy_init_script_igp3(struct e1000_hw *hw) +{ + hw_dbg(hw, "Running IGP 3 PHY init script\n"); + + /* PHY init IGP 3 */ + /* Enable rise/fall, 10-mode work in class-A */ + hw->phy.ops.write_phy_reg(hw, 0x2F5B, 0x9018); + /* Remove all caps from Replica path filter */ + hw->phy.ops.write_phy_reg(hw, 0x2F52, 0x0000); + /* Bias trimming for ADC, AFE and Driver (Default) */ + hw->phy.ops.write_phy_reg(hw, 0x2FB1, 0x8B24); + /* Increase Hybrid poly bias */ + hw->phy.ops.write_phy_reg(hw, 0x2FB2, 0xF8F0); + /* Add 4% to TX amplitude in Giga mode */ + hw->phy.ops.write_phy_reg(hw, 0x2010, 0x10B0); + /* Disable trimming (TTT) */ + hw->phy.ops.write_phy_reg(hw, 0x2011, 0x0000); + /* Poly DC correction to 94.6% + 2% for all channels */ + hw->phy.ops.write_phy_reg(hw, 0x20DD, 0x249A); + /* ABS DC correction to 95.9% */ + hw->phy.ops.write_phy_reg(hw, 0x20DE, 0x00D3); + /* BG temp curve trim */ + hw->phy.ops.write_phy_reg(hw, 0x28B4, 0x04CE); + /* Increasing ADC OPAMP stage 1 currents to max */ + hw->phy.ops.write_phy_reg(hw, 0x2F70, 0x29E4); + /* Force 1000 ( required for enabling PHY regs configuration) */ + hw->phy.ops.write_phy_reg(hw, 0x0000, 0x0140); + /* Set upd_freq to 6 */ + hw->phy.ops.write_phy_reg(hw, 0x1F30, 0x1606); + /* Disable NPDFE */ + hw->phy.ops.write_phy_reg(hw, 0x1F31, 0xB814); + /* Disable adaptive fixed FFE (Default) */ + hw->phy.ops.write_phy_reg(hw, 0x1F35, 0x002A); + /* Enable FFE hysteresis */ + hw->phy.ops.write_phy_reg(hw, 0x1F3E, 0x0067); + /* Fixed FFE for short cable lengths */ + hw->phy.ops.write_phy_reg(hw, 0x1F54, 0x0065); + /* Fixed FFE for medium cable lengths */ + hw->phy.ops.write_phy_reg(hw, 0x1F55, 0x002A); + /* Fixed FFE for long cable lengths */ + hw->phy.ops.write_phy_reg(hw, 0x1F56, 0x002A); + /* Enable Adaptive Clip Threshold */ + hw->phy.ops.write_phy_reg(hw, 0x1F72, 0x3FB0); + /* AHT reset limit to 1 */ + hw->phy.ops.write_phy_reg(hw, 0x1F76, 0xC0FF); + /* Set AHT master delay to 127 msec */ + hw->phy.ops.write_phy_reg(hw, 0x1F77, 0x1DEC); + /* Set scan bits for AHT */ + hw->phy.ops.write_phy_reg(hw, 0x1F78, 0xF9EF); + /* Set AHT Preset bits */ + hw->phy.ops.write_phy_reg(hw, 0x1F79, 0x0210); + /* Change integ_factor of channel A to 3 */ + hw->phy.ops.write_phy_reg(hw, 0x1895, 0x0003); + /* Change prop_factor of channels BCD to 8 */ + hw->phy.ops.write_phy_reg(hw, 0x1796, 0x0008); + /* Change cg_icount + enable integbp for channels BCD */ + hw->phy.ops.write_phy_reg(hw, 0x1798, 0xD008); + /* + * Change cg_icount + enable integbp + change prop_factor_master + * to 8 for channel A + */ + hw->phy.ops.write_phy_reg(hw, 0x1898, 0xD918); + /* Disable AHT in Slave mode on channel A */ + hw->phy.ops.write_phy_reg(hw, 0x187A, 0x0800); + /* + * Enable LPLU and disable AN to 1000 in non-D0a states, + * Enable SPD+B2B + */ + hw->phy.ops.write_phy_reg(hw, 0x0019, 0x008D); + /* Enable restart AN on an1000_dis change */ + hw->phy.ops.write_phy_reg(hw, 0x001B, 0x2080); + /* Enable wh_fifo read clock in 10/100 modes */ + hw->phy.ops.write_phy_reg(hw, 0x0014, 0x0045); + /* Restart AN, Speed selection is 1000 */ + hw->phy.ops.write_phy_reg(hw, 0x0000, 0x1340); + + return 0; +} + diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/igb/e1000_phy.h new file mode 100644 index 00000000000..8f8fe0a780d --- /dev/null +++ b/drivers/net/igb/e1000_phy.h @@ -0,0 +1,98 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_PHY_H_ +#define _E1000_PHY_H_ + +enum e1000_ms_type { + e1000_ms_hw_default = 0, + e1000_ms_force_master, + e1000_ms_force_slave, + e1000_ms_auto +}; + +enum e1000_smart_speed { + e1000_smart_speed_default = 0, + e1000_smart_speed_on, + e1000_smart_speed_off +}; + +s32 igb_check_downshift(struct e1000_hw *hw); +s32 igb_check_reset_block(struct e1000_hw *hw); +s32 igb_copper_link_autoneg(struct e1000_hw *hw); +s32 igb_phy_force_speed_duplex(struct e1000_hw *hw); +s32 igb_copper_link_setup_igp(struct e1000_hw *hw); +s32 igb_copper_link_setup_m88(struct e1000_hw *hw); +s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw); +s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw); +s32 igb_get_cable_length_m88(struct e1000_hw *hw); +s32 igb_get_cable_length_igp_2(struct e1000_hw *hw); +s32 igb_get_phy_id(struct e1000_hw *hw); +s32 igb_get_phy_info_igp(struct e1000_hw *hw); +s32 igb_get_phy_info_m88(struct e1000_hw *hw); +s32 igb_phy_sw_reset(struct e1000_hw *hw); +s32 igb_phy_hw_reset(struct e1000_hw *hw); +s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); +s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active); +s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); +s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations, + u32 usec_interval, bool *success); +s32 igb_phy_init_script_igp3(struct e1000_hw *hw); + +/* IGP01E1000 Specific Registers */ +#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ +#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */ +#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */ +#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */ +#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */ +#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 +#define IGP01E1000_PHY_POLARITY_MASK 0x0078 +#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 +#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */ +#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 + +/* Enable flexible speed on link-up */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */ +#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 +#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 +#define IGP01E1000_PSSR_MDIX 0x0008 +#define IGP01E1000_PSSR_SPEED_MASK 0xC000 +#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 +#define IGP02E1000_PHY_CHANNEL_NUM 4 +#define IGP02E1000_PHY_AGC_A 0x11B1 +#define IGP02E1000_PHY_AGC_B 0x12B1 +#define IGP02E1000_PHY_AGC_C 0x14B1 +#define IGP02E1000_PHY_AGC_D 0x18B1 +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */ +#define IGP02E1000_AGC_LENGTH_MASK 0x7F +#define IGP02E1000_AGC_RANGE 15 + +#define E1000_CABLE_LENGTH_UNDEFINED 0xFF + +#endif diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h new file mode 100644 index 00000000000..ff187b73c69 --- /dev/null +++ b/drivers/net/igb/e1000_regs.h @@ -0,0 +1,270 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_REGS_H_ +#define _E1000_REGS_H_ + +#define E1000_CTRL 0x00000 /* Device Control - RW */ +#define E1000_STATUS 0x00008 /* Device Status - RO */ +#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ +#define E1000_EERD 0x00014 /* EEPROM Read - RW */ +#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ +#define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ +#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ +#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ +#define E1000_FCT 0x00030 /* Flow Control Type - RW */ +#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */ +#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ +#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ +#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ +#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ +#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ +#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ +#define E1000_RCTL 0x00100 /* RX Control - RW */ +#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ +#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ +#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ +#define E1000_EITR(_n) (0x01680 + (0x4 * (_n))) +#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */ +#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */ +#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ +#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ +#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ +#define E1000_TCTL 0x00400 /* TX Control - RW */ +#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */ +#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */ +#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ +#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */ +#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */ +#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */ +#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ +#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_RDFPCQ(_n) (0x02430 + (0x4 * (_n))) +#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */ +/* Split and Replication RX Control - RW */ +/* + * Convenience macros + * + * Note: "_n" is the queue number of the register to be written to. + * + * Example usage: + * E1000_RDBAL_REG(current_rx_queue) + */ +#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) \ + : (0x0C000 + ((_n) * 0x40))) +#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) \ + : (0x0C004 + ((_n) * 0x40))) +#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) \ + : (0x0C008 + ((_n) * 0x40))) +#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) \ + : (0x0C00C + ((_n) * 0x40))) +#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) \ + : (0x0C010 + ((_n) * 0x40))) +#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) \ + : (0x0C018 + ((_n) * 0x40))) +#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) \ + : (0x0C028 + ((_n) * 0x40))) +#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) \ + : (0x0E000 + ((_n) * 0x40))) +#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) \ + : (0x0E004 + ((_n) * 0x40))) +#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) \ + : (0x0E008 + ((_n) * 0x40))) +#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) \ + : (0x0E010 + ((_n) * 0x40))) +#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) \ + : (0x0E018 + ((_n) * 0x40))) +#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) \ + : (0x0E028 + ((_n) * 0x40))) +#define E1000_TARC(_n) (0x03840 + (_n << 8)) +#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8)) +#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8)) +#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) \ + : (0x0E038 + ((_n) * 0x40))) +#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \ + : (0x0E03C + ((_n) * 0x40))) +#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */ +#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */ +#define E1000_DTXCTL 0x03590 /* DMA TX Control - RW */ +#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ +#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ +#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ +#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ +#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ +#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ +#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ +#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ +#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ +#define E1000_COLC 0x04028 /* Collision Count - R/clr */ +#define E1000_DC 0x04030 /* Defer Count - R/clr */ +#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */ +#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ +#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ +#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ +#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */ +#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */ +#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */ +#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */ +#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */ +#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */ +#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */ +#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */ +#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */ +#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */ +#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */ +#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */ +#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */ +#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */ +#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */ +#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */ +#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */ +#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */ +#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */ +#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */ +#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */ +#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */ +#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */ +#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */ +#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */ +#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ +#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */ +#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */ +#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */ +#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */ +#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */ +#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */ +#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */ +#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */ +#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */ +#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */ +#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */ +#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */ +#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */ +#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */ +#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ +#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ +#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +/* Interrupt Cause Rx Packet Timer Expire Count */ +#define E1000_ICRXPTC 0x04104 +/* Interrupt Cause Rx Absolute Timer Expire Count */ +#define E1000_ICRXATC 0x04108 +/* Interrupt Cause Tx Packet Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C +/* Interrupt Cause Tx Absolute Timer Expire Count */ +#define E1000_ICTXATC 0x04110 +/* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQEC 0x04118 +/* Interrupt Cause Tx Queue Minimum Threshold Count */ +#define E1000_ICTXQMTC 0x0411C +/* Interrupt Cause Rx Descriptor Minimum Threshold Count */ +#define E1000_ICRXDMTC 0x04120 +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ +#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */ +#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */ +#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */ +#define E1000_CBTMPC 0x0402C /* Circuit Breaker TX Packet Count */ +#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */ +#define E1000_CBRMPC 0x040FC /* Circuit Breaker RX Packet Count */ +#define E1000_RPTHC 0x04104 /* Rx Packets To Host */ +#define E1000_HGPTC 0x04118 /* Host Good Packets TX Count */ +#define E1000_HTCBDPC 0x04124 /* Host TX Circuit Breaker Dropped Count */ +#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */ +#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */ +#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */ +#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */ +#define E1000_LENERRS 0x04138 /* Length Errors Count */ +#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */ +#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */ +#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */ +#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */ +#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Page - RW */ +#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ +#define E1000_RLPML 0x05004 /* RX Long Packet Max Length */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ +#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ +#define E1000_RA 0x05400 /* Receive Address - RW Array */ +#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ +#define E1000_VMD_CTL 0x0581C /* VMDq Control - RW */ +#define E1000_WUC 0x05800 /* Wakeup Control - RW */ +#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ +#define E1000_WUS 0x05810 /* Wakeup Status - RO */ +#define E1000_MANC 0x05820 /* Management Control - RW */ +#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ +#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ +#define E1000_HOST_IF 0x08800 /* Host Interface */ + +#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ +#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */ +#define E1000_CCMCTL 0x05B48 /* CCM Control Register */ +#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */ +#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ +#define E1000_HICR 0x08F00 /* Host Inteface Control */ + +/* RSS registers */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */ +#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate Interrupt Ext*/ +#define E1000_IMIRVP 0x05AC0 /* Immediate Interrupt RX VLAN Priority - RW */ +/* MSI-X Allocation Register (_i) - RW */ +#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4)) +/* MSI-X Table entry addr low reg 0 - RW */ +#define E1000_MSIXTADD(_i) (0x0C000 + ((_i) * 0x10)) +/* MSI-X Table entry addr upper reg 0 - RW */ +#define E1000_MSIXTUADD(_i) (0x0C004 + ((_i) * 0x10)) +/* MSI-X Table entry message reg 0 - RW */ +#define E1000_MSIXTMSG(_i) (0x0C008 + ((_i) * 0x10)) +/* MSI-X Table entry vector ctrl reg 0 - RW */ +#define E1000_MSIXVCTRL(_i) (0x0C00C + ((_i) * 0x10)) +/* Redirection Table - RW Array */ +#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) +#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */ + +#define E1000_REGISTER(a, reg) reg + +#define wr32(reg, value) (writel(value, hw->hw_addr + reg)) +#define rd32(reg) (readl(hw->hw_addr + reg)) +#define wrfl() ((void)rd32(E1000_STATUS)) + +#define array_wr32(reg, offset, value) \ + (writel(value, hw->hw_addr + reg + ((offset) << 2))) +#define array_rd32(reg, offset) \ + (readl(hw->hw_addr + reg + ((offset) << 2))) + +#endif diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h new file mode 100644 index 00000000000..6b2e7d351d6 --- /dev/null +++ b/drivers/net/igb/igb.h @@ -0,0 +1,300 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + + +/* Linux PRO/1000 Ethernet Driver main header file */ + +#ifndef _IGB_H_ +#define _IGB_H_ + +#include "e1000_mac.h" +#include "e1000_82575.h" + +struct igb_adapter; + +/* Interrupt defines */ +#define IGB_MAX_TX_CLEAN 72 + +#define IGB_MIN_DYN_ITR 3000 +#define IGB_MAX_DYN_ITR 96000 +#define IGB_START_ITR 6000 + +#define IGB_DYN_ITR_PACKET_THRESHOLD 2 +#define IGB_DYN_ITR_LENGTH_LOW 200 +#define IGB_DYN_ITR_LENGTH_HIGH 1000 + +/* TX/RX descriptor defines */ +#define IGB_DEFAULT_TXD 256 +#define IGB_MIN_TXD 80 +#define IGB_MAX_TXD 4096 + +#define IGB_DEFAULT_RXD 256 +#define IGB_MIN_RXD 80 +#define IGB_MAX_RXD 4096 + +#define IGB_DEFAULT_ITR 3 /* dynamic */ +#define IGB_MAX_ITR_USECS 10000 +#define IGB_MIN_ITR_USECS 10 + +/* Transmit and receive queues */ +#define IGB_MAX_RX_QUEUES 4 + +/* RX descriptor control thresholds. + * PTHRESH - MAC will consider prefetch if it has fewer than this number of + * descriptors available in its onboard memory. + * Setting this to 0 disables RX descriptor prefetch. + * HTHRESH - MAC will only prefetch if there are at least this many descriptors + * available in host memory. + * If PTHRESH is 0, this should also be 0. + * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back + * descriptors until either it has this many to write back, or the + * ITR timer expires. + */ +#define IGB_RX_PTHRESH 16 +#define IGB_RX_HTHRESH 8 +#define IGB_RX_WTHRESH 1 + +/* this is the size past which hardware will drop packets when setting LPE=0 */ +#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 + +/* Supported Rx Buffer Sizes */ +#define IGB_RXBUFFER_128 128 /* Used for packet split */ +#define IGB_RXBUFFER_256 256 /* Used for packet split */ +#define IGB_RXBUFFER_512 512 +#define IGB_RXBUFFER_1024 1024 +#define IGB_RXBUFFER_2048 2048 +#define IGB_RXBUFFER_4096 4096 +#define IGB_RXBUFFER_8192 8192 +#define IGB_RXBUFFER_16384 16384 + +/* Packet Buffer allocations */ + + +/* How many Tx Descriptors do we need to call netif_wake_queue ? */ +#define IGB_TX_QUEUE_WAKE 16 +/* How many Rx Buffers do we bundle into one write to the hardware ? */ +#define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */ + +#define AUTO_ALL_MODES 0 +#define IGB_EEPROM_APME 0x0400 + +#ifndef IGB_MASTER_SLAVE +/* Switch to override PHY master/slave setting */ +#define IGB_MASTER_SLAVE e1000_ms_hw_default +#endif + +#define IGB_MNG_VLAN_NONE -1 + +/* wrapper around a pointer to a socket buffer, + * so a DMA handle can be stored along with the buffer */ +struct igb_buffer { + struct sk_buff *skb; + dma_addr_t dma; + union { + /* TX */ + struct { + unsigned long time_stamp; + u32 length; + }; + /* RX */ + struct { + struct page *page; + u64 page_dma; + }; + }; +}; + +struct igb_queue_stats { + u64 packets; + u64 bytes; +}; + +struct igb_ring { + struct igb_adapter *adapter; /* backlink */ + void *desc; /* descriptor ring memory */ + dma_addr_t dma; /* phys address of the ring */ + unsigned int size; /* length of desc. ring in bytes */ + unsigned int count; /* number of desc. in the ring */ + u16 next_to_use; + u16 next_to_clean; + u16 head; + u16 tail; + struct igb_buffer *buffer_info; /* array of buffer info structs */ + + u32 eims_value; + u32 itr_val; + u16 itr_register; + u16 cpu; + + unsigned int total_bytes; + unsigned int total_packets; + + union { + /* TX */ + struct { + spinlock_t tx_clean_lock; + spinlock_t tx_lock; + bool detect_tx_hung; + }; + /* RX */ + struct { + /* arrays of page information for packet split */ + struct sk_buff *pending_skb; + int pending_skb_page; + int no_itr_adjust; + struct igb_queue_stats rx_stats; + struct napi_struct napi; + }; + }; + + char name[IFNAMSIZ + 5]; +}; + +#define IGB_DESC_UNUSED(R) \ + ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \ + (R)->next_to_clean - (R)->next_to_use - 1) + +#define E1000_RX_DESC_ADV(R, i) \ + (&(((union e1000_adv_rx_desc *)((R).desc))[i])) +#define E1000_TX_DESC_ADV(R, i) \ + (&(((union e1000_adv_tx_desc *)((R).desc))[i])) +#define E1000_TX_CTXTDESC_ADV(R, i) \ + (&(((struct e1000_adv_tx_context_desc *)((R).desc))[i])) +#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) +#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc) +#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc) + +/* board specific private data structure */ + +struct igb_adapter { + struct timer_list watchdog_timer; + struct timer_list phy_info_timer; + struct vlan_group *vlgrp; + u16 mng_vlan_id; + u32 bd_number; + u32 rx_buffer_len; + u32 wol; + u32 en_mng_pt; + u16 link_speed; + u16 link_duplex; + unsigned int total_tx_bytes; + unsigned int total_tx_packets; + unsigned int total_rx_bytes; + unsigned int total_rx_packets; + /* Interrupt Throttle Rate */ + u32 itr; + u32 itr_setting; + u16 tx_itr; + u16 rx_itr; + int set_itr; + + struct work_struct reset_task; + struct work_struct watchdog_task; + bool fc_autoneg; + u8 tx_timeout_factor; + struct timer_list blink_timer; + unsigned long led_status; + + /* TX */ + struct igb_ring *tx_ring; /* One per active queue */ + unsigned int restart_queue; + unsigned long tx_queue_len; + u32 txd_cmd; + u32 gotc; + u64 gotc_old; + u64 tpt_old; + u64 colc_old; + u32 tx_timeout_count; + + /* RX */ + struct igb_ring *rx_ring; /* One per active queue */ + int num_tx_queues; + int num_rx_queues; + + u64 hw_csum_err; + u64 hw_csum_good; + u64 rx_hdr_split; + u32 alloc_rx_buff_failed; + bool rx_csum; + u32 gorc; + u64 gorc_old; + u16 rx_ps_hdr_size; + u32 max_frame_size; + u32 min_frame_size; + + /* OS defined structs */ + struct net_device *netdev; + struct napi_struct napi; + struct pci_dev *pdev; + struct net_device_stats net_stats; + + /* structs defined in e1000_hw.h */ + struct e1000_hw hw; + struct e1000_hw_stats stats; + struct e1000_phy_info phy_info; + struct e1000_phy_stats phy_stats; + + u32 test_icr; + struct igb_ring test_tx_ring; + struct igb_ring test_rx_ring; + + int msg_enable; + struct msix_entry *msix_entries; + u32 eims_enable_mask; + + /* to not mess up cache alignment, always add to the bottom */ + unsigned long state; + unsigned int msi_enabled; + + u32 eeprom_wol; +}; + +enum e1000_state_t { + __IGB_TESTING, + __IGB_RESETTING, + __IGB_DOWN +}; + +enum igb_boards { + board_82575, +}; + +extern char igb_driver_name[]; +extern char igb_driver_version[]; + +extern char *igb_get_hw_dev_name(struct e1000_hw *hw); +extern int igb_up(struct igb_adapter *); +extern void igb_down(struct igb_adapter *); +extern void igb_reinit_locked(struct igb_adapter *); +extern void igb_reset(struct igb_adapter *); +extern int igb_set_spd_dplx(struct igb_adapter *, u16); +extern int igb_setup_tx_resources(struct igb_adapter *, struct igb_ring *); +extern int igb_setup_rx_resources(struct igb_adapter *, struct igb_ring *); +extern void igb_update_stats(struct igb_adapter *); +extern void igb_set_ethtool_ops(struct net_device *); + +#endif /* _IGB_H_ */ diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c new file mode 100644 index 00000000000..f69721e4eaa --- /dev/null +++ b/drivers/net/igb/igb_ethtool.c @@ -0,0 +1,1927 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool support for igb */ + +#include <linux/vmalloc.h> +#include <linux/netdevice.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/if_ether.h> +#include <linux/ethtool.h> + +#include "igb.h" + +struct igb_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define IGB_STAT(m) sizeof(((struct igb_adapter *)0)->m), \ + offsetof(struct igb_adapter, m) +static const struct igb_stats igb_gstrings_stats[] = { + { "rx_packets", IGB_STAT(stats.gprc) }, + { "tx_packets", IGB_STAT(stats.gptc) }, + { "rx_bytes", IGB_STAT(stats.gorc) }, + { "tx_bytes", IGB_STAT(stats.gotc) }, + { "rx_broadcast", IGB_STAT(stats.bprc) }, + { "tx_broadcast", IGB_STAT(stats.bptc) }, + { "rx_multicast", IGB_STAT(stats.mprc) }, + { "tx_multicast", IGB_STAT(stats.mptc) }, + { "rx_errors", IGB_STAT(net_stats.rx_errors) }, + { "tx_errors", IGB_STAT(net_stats.tx_errors) }, + { "tx_dropped", IGB_STAT(net_stats.tx_dropped) }, + { "multicast", IGB_STAT(stats.mprc) }, + { "collisions", IGB_STAT(stats.colc) }, + { "rx_length_errors", IGB_STAT(net_stats.rx_length_errors) }, + { "rx_over_errors", IGB_STAT(net_stats.rx_over_errors) }, + { "rx_crc_errors", IGB_STAT(stats.crcerrs) }, + { "rx_frame_errors", IGB_STAT(net_stats.rx_frame_errors) }, + { "rx_no_buffer_count", IGB_STAT(stats.rnbc) }, + { "rx_missed_errors", IGB_STAT(stats.mpc) }, + { "tx_aborted_errors", IGB_STAT(stats.ecol) }, + { "tx_carrier_errors", IGB_STAT(stats.tncrs) }, + { "tx_fifo_errors", IGB_STAT(net_stats.tx_fifo_errors) }, + { "tx_heartbeat_errors", IGB_STAT(net_stats.tx_heartbeat_errors) }, + { "tx_window_errors", IGB_STAT(stats.latecol) }, + { "tx_abort_late_coll", IGB_STAT(stats.latecol) }, + { "tx_deferred_ok", IGB_STAT(stats.dc) }, + { "tx_single_coll_ok", IGB_STAT(stats.scc) }, + { "tx_multi_coll_ok", IGB_STAT(stats.mcc) }, + { "tx_timeout_count", IGB_STAT(tx_timeout_count) }, + { "tx_restart_queue", IGB_STAT(restart_queue) }, + { "rx_long_length_errors", IGB_STAT(stats.roc) }, + { "rx_short_length_errors", IGB_STAT(stats.ruc) }, + { "rx_align_errors", IGB_STAT(stats.algnerrc) }, + { "tx_tcp_seg_good", IGB_STAT(stats.tsctc) }, + { "tx_tcp_seg_failed", IGB_STAT(stats.tsctfc) }, + { "rx_flow_control_xon", IGB_STAT(stats.xonrxc) }, + { "rx_flow_control_xoff", IGB_STAT(stats.xoffrxc) }, + { "tx_flow_control_xon", IGB_STAT(stats.xontxc) }, + { "tx_flow_control_xoff", IGB_STAT(stats.xofftxc) }, + { "rx_long_byte_count", IGB_STAT(stats.gorc) }, + { "rx_csum_offload_good", IGB_STAT(hw_csum_good) }, + { "rx_csum_offload_errors", IGB_STAT(hw_csum_err) }, + { "rx_header_split", IGB_STAT(rx_hdr_split) }, + { "alloc_rx_buff_failed", IGB_STAT(alloc_rx_buff_failed) }, + { "tx_smbus", IGB_STAT(stats.mgptc) }, + { "rx_smbus", IGB_STAT(stats.mgprc) }, + { "dropped_smbus", IGB_STAT(stats.mgpdc) }, +}; + +#define IGB_QUEUE_STATS_LEN \ + ((((((struct igb_adapter *)netdev->priv)->num_rx_queues > 1) ? \ + ((struct igb_adapter *)netdev->priv)->num_rx_queues : 0) + \ + (((((struct igb_adapter *)netdev->priv)->num_tx_queues > 1) ? \ + ((struct igb_adapter *)netdev->priv)->num_tx_queues : 0))) * \ + (sizeof(struct igb_queue_stats) / sizeof(u64))) +#define IGB_GLOBAL_STATS_LEN \ + sizeof(igb_gstrings_stats) / sizeof(struct igb_stats) +#define IGB_STATS_LEN (IGB_GLOBAL_STATS_LEN + IGB_QUEUE_STATS_LEN) +static const char igb_gstrings_test[][ETH_GSTRING_LEN] = { + "Register test (offline)", "Eeprom test (offline)", + "Interrupt test (offline)", "Loopback test (offline)", + "Link test (on/offline)" +}; +#define IGB_TEST_LEN sizeof(igb_gstrings_test) / ETH_GSTRING_LEN + +static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (hw->phy.media_type == e1000_media_type_copper) { + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full| + SUPPORTED_Autoneg | + SUPPORTED_TP); + ecmd->advertising = ADVERTISED_TP; + + if (hw->mac.autoneg == 1) { + ecmd->advertising |= ADVERTISED_Autoneg; + /* the e1000 autoneg seems to match ethtool nicely */ + ecmd->advertising |= hw->phy.autoneg_advertised; + } + + ecmd->port = PORT_TP; + ecmd->phy_address = hw->phy.addr; + } else { + ecmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg); + + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg); + + ecmd->port = PORT_FIBRE; + } + + ecmd->transceiver = XCVR_INTERNAL; + + if (rd32(E1000_STATUS) & E1000_STATUS_LU) { + + adapter->hw.mac.ops.get_speed_and_duplex(hw, + &adapter->link_speed, + &adapter->link_duplex); + ecmd->speed = adapter->link_speed; + + /* unfortunately FULL_DUPLEX != DUPLEX_FULL + * and HALF_DUPLEX != DUPLEX_HALF */ + + if (adapter->link_duplex == FULL_DUPLEX) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) || + hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE; + return 0; +} + +static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* When SoL/IDER sessions are active, autoneg/speed/duplex + * cannot be changed */ + if (igb_check_reset_block(hw)) { + dev_err(&adapter->pdev->dev, "Cannot change link " + "characteristics when SoL/IDER is active.\n"); + return -EINVAL; + } + + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + msleep(1); + + if (ecmd->autoneg == AUTONEG_ENABLE) { + hw->mac.autoneg = 1; + if (hw->phy.media_type == e1000_media_type_fiber) + hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg; + else + hw->phy.autoneg_advertised = ecmd->advertising | + ADVERTISED_TP | + ADVERTISED_Autoneg; + ecmd->advertising = hw->phy.autoneg_advertised; + } else + if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { + clear_bit(__IGB_RESETTING, &adapter->state); + return -EINVAL; + } + + /* reset the link */ + + if (netif_running(adapter->netdev)) { + igb_down(adapter); + igb_up(adapter); + } else + igb_reset(adapter); + + clear_bit(__IGB_RESETTING, &adapter->state); + return 0; +} + +static void igb_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + pause->autoneg = + (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); + + if (hw->fc.type == e1000_fc_rx_pause) + pause->rx_pause = 1; + else if (hw->fc.type == e1000_fc_tx_pause) + pause->tx_pause = 1; + else if (hw->fc.type == e1000_fc_full) { + pause->rx_pause = 1; + pause->tx_pause = 1; + } +} + +static int igb_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int retval = 0; + + adapter->fc_autoneg = pause->autoneg; + + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + msleep(1); + + if (pause->rx_pause && pause->tx_pause) + hw->fc.type = e1000_fc_full; + else if (pause->rx_pause && !pause->tx_pause) + hw->fc.type = e1000_fc_rx_pause; + else if (!pause->rx_pause && pause->tx_pause) + hw->fc.type = e1000_fc_tx_pause; + else if (!pause->rx_pause && !pause->tx_pause) + hw->fc.type = e1000_fc_none; + + hw->fc.original_type = hw->fc.type; + + if (adapter->fc_autoneg == AUTONEG_ENABLE) { + if (netif_running(adapter->netdev)) { + igb_down(adapter); + igb_up(adapter); + } else + igb_reset(adapter); + } else + retval = ((hw->phy.media_type == e1000_media_type_fiber) ? + igb_setup_link(hw) : igb_force_mac_fc(hw)); + + clear_bit(__IGB_RESETTING, &adapter->state); + return retval; +} + +static u32 igb_get_rx_csum(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + return adapter->rx_csum; +} + +static int igb_set_rx_csum(struct net_device *netdev, u32 data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + adapter->rx_csum = data; + + return 0; +} + +static u32 igb_get_tx_csum(struct net_device *netdev) +{ + return (netdev->features & NETIF_F_HW_CSUM) != 0; +} + +static int igb_set_tx_csum(struct net_device *netdev, u32 data) +{ + if (data) + netdev->features |= NETIF_F_HW_CSUM; + else + netdev->features &= ~NETIF_F_HW_CSUM; + + return 0; +} + +static int igb_set_tso(struct net_device *netdev, u32 data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + if (data) + netdev->features |= NETIF_F_TSO; + else + netdev->features &= ~NETIF_F_TSO; + + if (data) + netdev->features |= NETIF_F_TSO6; + else + netdev->features &= ~NETIF_F_TSO6; + + dev_info(&adapter->pdev->dev, "TSO is %s\n", + data ? "Enabled" : "Disabled"); + return 0; +} + +static u32 igb_get_msglevel(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void igb_set_msglevel(struct net_device *netdev, u32 data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} + +static int igb_get_regs_len(struct net_device *netdev) +{ +#define IGB_REGS_LEN 551 + return IGB_REGS_LEN * sizeof(u32); +} + +static void igb_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u8 i; + + memset(p, 0, IGB_REGS_LEN * sizeof(u32)); + + regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id; + + /* General Registers */ + regs_buff[0] = rd32(E1000_CTRL); + regs_buff[1] = rd32(E1000_STATUS); + regs_buff[2] = rd32(E1000_CTRL_EXT); + regs_buff[3] = rd32(E1000_MDIC); + regs_buff[4] = rd32(E1000_SCTL); + regs_buff[5] = rd32(E1000_CONNSW); + regs_buff[6] = rd32(E1000_VET); + regs_buff[7] = rd32(E1000_LEDCTL); + regs_buff[8] = rd32(E1000_PBA); + regs_buff[9] = rd32(E1000_PBS); + regs_buff[10] = rd32(E1000_FRTIMER); + regs_buff[11] = rd32(E1000_TCPTIMER); + + /* NVM Register */ + regs_buff[12] = rd32(E1000_EECD); + + /* Interrupt */ + regs_buff[13] = rd32(E1000_EICR); + regs_buff[14] = rd32(E1000_EICS); + regs_buff[15] = rd32(E1000_EIMS); + regs_buff[16] = rd32(E1000_EIMC); + regs_buff[17] = rd32(E1000_EIAC); + regs_buff[18] = rd32(E1000_EIAM); + regs_buff[19] = rd32(E1000_ICR); + regs_buff[20] = rd32(E1000_ICS); + regs_buff[21] = rd32(E1000_IMS); + regs_buff[22] = rd32(E1000_IMC); + regs_buff[23] = rd32(E1000_IAC); + regs_buff[24] = rd32(E1000_IAM); + regs_buff[25] = rd32(E1000_IMIRVP); + + /* Flow Control */ + regs_buff[26] = rd32(E1000_FCAL); + regs_buff[27] = rd32(E1000_FCAH); + regs_buff[28] = rd32(E1000_FCTTV); + regs_buff[29] = rd32(E1000_FCRTL); + regs_buff[30] = rd32(E1000_FCRTH); + regs_buff[31] = rd32(E1000_FCRTV); + + /* Receive */ + regs_buff[32] = rd32(E1000_RCTL); + regs_buff[33] = rd32(E1000_RXCSUM); + regs_buff[34] = rd32(E1000_RLPML); + regs_buff[35] = rd32(E1000_RFCTL); + regs_buff[36] = rd32(E1000_MRQC); + regs_buff[37] = rd32(E1000_VMD_CTL); + + /* Transmit */ + regs_buff[38] = rd32(E1000_TCTL); + regs_buff[39] = rd32(E1000_TCTL_EXT); + regs_buff[40] = rd32(E1000_TIPG); + regs_buff[41] = rd32(E1000_DTXCTL); + + /* Wake Up */ + regs_buff[42] = rd32(E1000_WUC); + regs_buff[43] = rd32(E1000_WUFC); + regs_buff[44] = rd32(E1000_WUS); + regs_buff[45] = rd32(E1000_IPAV); + regs_buff[46] = rd32(E1000_WUPL); + + /* MAC */ + regs_buff[47] = rd32(E1000_PCS_CFG0); + regs_buff[48] = rd32(E1000_PCS_LCTL); + regs_buff[49] = rd32(E1000_PCS_LSTAT); + regs_buff[50] = rd32(E1000_PCS_ANADV); + regs_buff[51] = rd32(E1000_PCS_LPAB); + regs_buff[52] = rd32(E1000_PCS_NPTX); + regs_buff[53] = rd32(E1000_PCS_LPABNP); + + /* Statistics */ + regs_buff[54] = adapter->stats.crcerrs; + regs_buff[55] = adapter->stats.algnerrc; + regs_buff[56] = adapter->stats.symerrs; + regs_buff[57] = adapter->stats.rxerrc; + regs_buff[58] = adapter->stats.mpc; + regs_buff[59] = adapter->stats.scc; + regs_buff[60] = adapter->stats.ecol; + regs_buff[61] = adapter->stats.mcc; + regs_buff[62] = adapter->stats.latecol; + regs_buff[63] = adapter->stats.colc; + regs_buff[64] = adapter->stats.dc; + regs_buff[65] = adapter->stats.tncrs; + regs_buff[66] = adapter->stats.sec; + regs_buff[67] = adapter->stats.htdpmc; + regs_buff[68] = adapter->stats.rlec; + regs_buff[69] = adapter->stats.xonrxc; + regs_buff[70] = adapter->stats.xontxc; + regs_buff[71] = adapter->stats.xoffrxc; + regs_buff[72] = adapter->stats.xofftxc; + regs_buff[73] = adapter->stats.fcruc; + regs_buff[74] = adapter->stats.prc64; + regs_buff[75] = adapter->stats.prc127; + regs_buff[76] = adapter->stats.prc255; + regs_buff[77] = adapter->stats.prc511; + regs_buff[78] = adapter->stats.prc1023; + regs_buff[79] = adapter->stats.prc1522; + regs_buff[80] = adapter->stats.gprc; + regs_buff[81] = adapter->stats.bprc; + regs_buff[82] = adapter->stats.mprc; + regs_buff[83] = adapter->stats.gptc; + regs_buff[84] = adapter->stats.gorc; + regs_buff[86] = adapter->stats.gotc; + regs_buff[88] = adapter->stats.rnbc; + regs_buff[89] = adapter->stats.ruc; + regs_buff[90] = adapter->stats.rfc; + regs_buff[91] = adapter->stats.roc; + regs_buff[92] = adapter->stats.rjc; + regs_buff[93] = adapter->stats.mgprc; + regs_buff[94] = adapter->stats.mgpdc; + regs_buff[95] = adapter->stats.mgptc; + regs_buff[96] = adapter->stats.tor; + regs_buff[98] = adapter->stats.tot; + regs_buff[100] = adapter->stats.tpr; + regs_buff[101] = adapter->stats.tpt; + regs_buff[102] = adapter->stats.ptc64; + regs_buff[103] = adapter->stats.ptc127; + regs_buff[104] = adapter->stats.ptc255; + regs_buff[105] = adapter->stats.ptc511; + regs_buff[106] = adapter->stats.ptc1023; + regs_buff[107] = adapter->stats.ptc1522; + regs_buff[108] = adapter->stats.mptc; + regs_buff[109] = adapter->stats.bptc; + regs_buff[110] = adapter->stats.tsctc; + regs_buff[111] = adapter->stats.iac; + regs_buff[112] = adapter->stats.rpthc; + regs_buff[113] = adapter->stats.hgptc; + regs_buff[114] = adapter->stats.hgorc; + regs_buff[116] = adapter->stats.hgotc; + regs_buff[118] = adapter->stats.lenerrs; + regs_buff[119] = adapter->stats.scvpc; + regs_buff[120] = adapter->stats.hrmpc; + + /* These should probably be added to e1000_regs.h instead */ + #define E1000_PSRTYPE_REG(_i) (0x05480 + ((_i) * 4)) + #define E1000_RAL(_i) (0x05400 + ((_i) * 8)) + #define E1000_RAH(_i) (0x05404 + ((_i) * 8)) + #define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8)) + #define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4)) + #define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4)) + #define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8)) + #define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8)) + #define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8)) + + for (i = 0; i < 4; i++) + regs_buff[121 + i] = rd32(E1000_SRRCTL(i)); + for (i = 0; i < 4; i++) + regs_buff[125 + i] = rd32(E1000_PSRTYPE_REG(i)); + for (i = 0; i < 4; i++) + regs_buff[129 + i] = rd32(E1000_RDBAL(i)); + for (i = 0; i < 4; i++) + regs_buff[133 + i] = rd32(E1000_RDBAH(i)); + for (i = 0; i < 4; i++) + regs_buff[137 + i] = rd32(E1000_RDLEN(i)); + for (i = 0; i < 4; i++) + regs_buff[141 + i] = rd32(E1000_RDH(i)); + for (i = 0; i < 4; i++) + regs_buff[145 + i] = rd32(E1000_RDT(i)); + for (i = 0; i < 4; i++) + regs_buff[149 + i] = rd32(E1000_RXDCTL(i)); + + for (i = 0; i < 10; i++) + regs_buff[153 + i] = rd32(E1000_EITR(i)); + for (i = 0; i < 8; i++) + regs_buff[163 + i] = rd32(E1000_IMIR(i)); + for (i = 0; i < 8; i++) + regs_buff[171 + i] = rd32(E1000_IMIREXT(i)); + for (i = 0; i < 16; i++) + regs_buff[179 + i] = rd32(E1000_RAL(i)); + for (i = 0; i < 16; i++) + regs_buff[195 + i] = rd32(E1000_RAH(i)); + + for (i = 0; i < 4; i++) + regs_buff[211 + i] = rd32(E1000_TDBAL(i)); + for (i = 0; i < 4; i++) + regs_buff[215 + i] = rd32(E1000_TDBAH(i)); + for (i = 0; i < 4; i++) + regs_buff[219 + i] = rd32(E1000_TDLEN(i)); + for (i = 0; i < 4; i++) + regs_buff[223 + i] = rd32(E1000_TDH(i)); + for (i = 0; i < 4; i++) + regs_buff[227 + i] = rd32(E1000_TDT(i)); + for (i = 0; i < 4; i++) + regs_buff[231 + i] = rd32(E1000_TXDCTL(i)); + for (i = 0; i < 4; i++) + regs_buff[235 + i] = rd32(E1000_TDWBAL(i)); + for (i = 0; i < 4; i++) + regs_buff[239 + i] = rd32(E1000_TDWBAH(i)); + for (i = 0; i < 4; i++) + regs_buff[243 + i] = rd32(E1000_DCA_TXCTRL(i)); + + for (i = 0; i < 4; i++) + regs_buff[247 + i] = rd32(E1000_IP4AT_REG(i)); + for (i = 0; i < 4; i++) + regs_buff[251 + i] = rd32(E1000_IP6AT_REG(i)); + for (i = 0; i < 32; i++) + regs_buff[255 + i] = rd32(E1000_WUPM_REG(i)); + for (i = 0; i < 128; i++) + regs_buff[287 + i] = rd32(E1000_FFMT_REG(i)); + for (i = 0; i < 128; i++) + regs_buff[415 + i] = rd32(E1000_FFVT_REG(i)); + for (i = 0; i < 4; i++) + regs_buff[543 + i] = rd32(E1000_FFLT_REG(i)); + + regs_buff[547] = rd32(E1000_TDFH); + regs_buff[548] = rd32(E1000_TDFT); + regs_buff[549] = rd32(E1000_TDFHS); + regs_buff[550] = rd32(E1000_TDFPC); + +} + +static int igb_get_eeprom_len(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + return adapter->hw.nvm.word_size * 2; +} + +static int igb_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 *eeprom_buff; + int first_word, last_word; + int ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + eeprom->magic = hw->vendor_id | (hw->device_id << 16); + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + + eeprom_buff = kmalloc(sizeof(u16) * + (last_word - first_word + 1), GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + if (hw->nvm.type == e1000_nvm_eeprom_spi) + ret_val = hw->nvm.ops.read_nvm(hw, first_word, + last_word - first_word + 1, + eeprom_buff); + else { + for (i = 0; i < last_word - first_word + 1; i++) { + ret_val = hw->nvm.ops.read_nvm(hw, first_word + i, 1, + &eeprom_buff[i]); + if (ret_val) + break; + } + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), + eeprom->len); + kfree(eeprom_buff); + + return ret_val; +} + +static int igb_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 *eeprom_buff; + void *ptr; + int max_len, first_word, last_word, ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EOPNOTSUPP; + + if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) + return -EFAULT; + + max_len = hw->nvm.word_size * 2; + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + eeprom_buff = kmalloc(max_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ptr = (void *)eeprom_buff; + + if (eeprom->offset & 1) { + /* need read/modify/write of first changed EEPROM word */ + /* only the second byte of the word is being modified */ + ret_val = hw->nvm.ops.read_nvm(hw, first_word, 1, + &eeprom_buff[0]); + ptr++; + } + if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { + /* need read/modify/write of last changed EEPROM word */ + /* only the first byte of the word is being modified */ + ret_val = hw->nvm.ops.read_nvm(hw, last_word, 1, + &eeprom_buff[last_word - first_word]); + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(ptr, bytes, eeprom->len); + + for (i = 0; i < last_word - first_word + 1; i++) + eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]); + + ret_val = hw->nvm.ops.write_nvm(hw, first_word, + last_word - first_word + 1, eeprom_buff); + + /* Update the checksum over the first part of the EEPROM if needed + * and flush shadow RAM for 82573 controllers */ + if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG))) + igb_update_nvm_checksum(hw); + + kfree(eeprom_buff); + return ret_val; +} + +static void igb_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + char firmware_version[32]; + u16 eeprom_data; + + strncpy(drvinfo->driver, igb_driver_name, 32); + strncpy(drvinfo->version, igb_driver_version, 32); + + /* EEPROM image version # is reported as firmware version # for + * 82575 controllers */ + adapter->hw.nvm.ops.read_nvm(&adapter->hw, 5, 1, &eeprom_data); + sprintf(firmware_version, "%d.%d-%d", + (eeprom_data & 0xF000) >> 12, + (eeprom_data & 0x0FF0) >> 4, + eeprom_data & 0x000F); + + strncpy(drvinfo->fw_version, firmware_version, 32); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); + drvinfo->n_stats = IGB_STATS_LEN; + drvinfo->testinfo_len = IGB_TEST_LEN; + drvinfo->regdump_len = igb_get_regs_len(netdev); + drvinfo->eedump_len = igb_get_eeprom_len(netdev); +} + +static void igb_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct igb_ring *tx_ring = adapter->tx_ring; + struct igb_ring *rx_ring = adapter->rx_ring; + + ring->rx_max_pending = IGB_MAX_RXD; + ring->tx_max_pending = IGB_MAX_TXD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = rx_ring->count; + ring->tx_pending = tx_ring->count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static int igb_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct igb_buffer *old_buf; + struct igb_buffer *old_rx_buf; + void *old_desc; + int i, err; + u32 new_rx_count, new_tx_count, old_size; + dma_addr_t old_dma; + + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + return -EINVAL; + + new_rx_count = max(ring->rx_pending, (u32)IGB_MIN_RXD); + new_rx_count = min(new_rx_count, (u32)IGB_MAX_RXD); + new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE); + + new_tx_count = max(ring->tx_pending, (u32)IGB_MIN_TXD); + new_tx_count = min(new_tx_count, (u32)IGB_MAX_TXD); + new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE); + + if ((new_tx_count == adapter->tx_ring->count) && + (new_rx_count == adapter->rx_ring->count)) { + /* nothing to do */ + return 0; + } + + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + msleep(1); + + if (netif_running(adapter->netdev)) + igb_down(adapter); + + /* + * We can't just free everything and then setup again, + * because the ISRs in MSI-X mode get passed pointers + * to the tx and rx ring structs. + */ + if (new_tx_count != adapter->tx_ring->count) { + for (i = 0; i < adapter->num_tx_queues; i++) { + /* Save existing descriptor ring */ + old_buf = adapter->tx_ring[i].buffer_info; + old_desc = adapter->tx_ring[i].desc; + old_size = adapter->tx_ring[i].size; + old_dma = adapter->tx_ring[i].dma; + /* Try to allocate a new one */ + adapter->tx_ring[i].buffer_info = NULL; + adapter->tx_ring[i].desc = NULL; + adapter->tx_ring[i].count = new_tx_count; + err = igb_setup_tx_resources(adapter, + &adapter->tx_ring[i]); + if (err) { + /* Restore the old one so at least + the adapter still works, even if + we failed the request */ + adapter->tx_ring[i].buffer_info = old_buf; + adapter->tx_ring[i].desc = old_desc; + adapter->tx_ring[i].size = old_size; + adapter->tx_ring[i].dma = old_dma; + goto err_setup; + } + /* Free the old buffer manually */ + vfree(old_buf); + pci_free_consistent(adapter->pdev, old_size, + old_desc, old_dma); + } + } + + if (new_rx_count != adapter->rx_ring->count) { + for (i = 0; i < adapter->num_rx_queues; i++) { + + old_rx_buf = adapter->rx_ring[i].buffer_info; + old_desc = adapter->rx_ring[i].desc; + old_size = adapter->rx_ring[i].size; + old_dma = adapter->rx_ring[i].dma; + + adapter->rx_ring[i].buffer_info = NULL; + adapter->rx_ring[i].desc = NULL; + adapter->rx_ring[i].dma = 0; + adapter->rx_ring[i].count = new_rx_count; + err = igb_setup_rx_resources(adapter, + &adapter->rx_ring[i]); + if (err) { + adapter->rx_ring[i].buffer_info = old_rx_buf; + adapter->rx_ring[i].desc = old_desc; + adapter->rx_ring[i].size = old_size; + adapter->rx_ring[i].dma = old_dma; + goto err_setup; + } + + vfree(old_rx_buf); + pci_free_consistent(adapter->pdev, old_size, old_desc, + old_dma); + } + } + + err = 0; +err_setup: + if (netif_running(adapter->netdev)) + igb_up(adapter); + + clear_bit(__IGB_RESETTING, &adapter->state); + return err; +} + +/* ethtool register test data */ +struct igb_reg_test { + u16 reg; + u8 array_len; + u8 test_type; + u32 mask; + u32 write; +}; + +/* In the hardware, registers are laid out either singly, in arrays + * spaced 0x100 bytes apart, or in contiguous tables. We assume + * most tests take place on arrays or single registers (handled + * as a single-element array) and special-case the tables. + * Table tests are always pattern tests. + * + * We also make provision for some required setup steps by specifying + * registers to be written without any read-back testing. + */ + +#define PATTERN_TEST 1 +#define SET_READ_TEST 2 +#define WRITE_NO_TEST 3 +#define TABLE32_TEST 4 +#define TABLE64_TEST_LO 5 +#define TABLE64_TEST_HI 6 + +/* default register test */ +static struct igb_reg_test reg_test_82575[] = { + { E1000_FCAL, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_VET, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + /* Enable all four RX queues before testing. */ + { E1000_RXDCTL(0), 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, + /* RDH is read-only for 82575, only test RDT. */ + { E1000_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 }, + { E1000_FCRTH, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_RCTL, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB }, + { E1000_RCTL, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF }, + { E1000_TCTL, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_TXCW, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF }, + { E1000_RA, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 16, TABLE64_TEST_HI, 0x800FFFFF, 0xFFFFFFFF }, + { E1000_MTA, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data, + int reg, u32 mask, u32 write) +{ + u32 pat, val; + u32 _test[] = + {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; + for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { + writel((_test[pat] & write), (adapter->hw.hw_addr + reg)); + val = readl(adapter->hw.hw_addr + reg); + if (val != (_test[pat] & write & mask)) { + dev_err(&adapter->pdev->dev, "pattern test reg %04X " + "failed: got 0x%08X expected 0x%08X\n", + reg, val, (_test[pat] & write & mask)); + *data = reg; + return 1; + } + } + return 0; +} + +static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data, + int reg, u32 mask, u32 write) +{ + u32 val; + writel((write & mask), (adapter->hw.hw_addr + reg)); + val = readl(adapter->hw.hw_addr + reg); + if ((write & mask) != (val & mask)) { + dev_err(&adapter->pdev->dev, "set/check reg %04X test failed:" + " got 0x%08X expected 0x%08X\n", reg, + (val & mask), (write & mask)); + *data = reg; + return 1; + } + return 0; +} + +#define REG_PATTERN_TEST(reg, mask, write) \ + do { \ + if (reg_pattern_test(adapter, data, reg, mask, write)) \ + return 1; \ + } while (0) + +#define REG_SET_AND_CHECK(reg, mask, write) \ + do { \ + if (reg_set_and_check(adapter, data, reg, mask, write)) \ + return 1; \ + } while (0) + +static int igb_reg_test(struct igb_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + struct igb_reg_test *test; + u32 value, before, after; + u32 i, toggle; + + toggle = 0x7FFFF3FF; + test = reg_test_82575; + + /* Because the status register is such a special case, + * we handle it separately from the rest of the register + * tests. Some bits are read-only, some toggle, and some + * are writable on newer MACs. + */ + before = rd32(E1000_STATUS); + value = (rd32(E1000_STATUS) & toggle); + wr32(E1000_STATUS, toggle); + after = rd32(E1000_STATUS) & toggle; + if (value != after) { + dev_err(&adapter->pdev->dev, "failed STATUS register test " + "got: 0x%08X expected: 0x%08X\n", after, value); + *data = 1; + return 1; + } + /* restore previous status */ + wr32(E1000_STATUS, before); + + /* Perform the remainder of the register test, looping through + * the test table until we either fail or reach the null entry. + */ + while (test->reg) { + for (i = 0; i < test->array_len; i++) { + switch (test->test_type) { + case PATTERN_TEST: + REG_PATTERN_TEST(test->reg + (i * 0x100), + test->mask, + test->write); + break; + case SET_READ_TEST: + REG_SET_AND_CHECK(test->reg + (i * 0x100), + test->mask, + test->write); + break; + case WRITE_NO_TEST: + writel(test->write, + (adapter->hw.hw_addr + test->reg) + + (i * 0x100)); + break; + case TABLE32_TEST: + REG_PATTERN_TEST(test->reg + (i * 4), + test->mask, + test->write); + break; + case TABLE64_TEST_LO: + REG_PATTERN_TEST(test->reg + (i * 8), + test->mask, + test->write); + break; + case TABLE64_TEST_HI: + REG_PATTERN_TEST((test->reg + 4) + (i * 8), + test->mask, + test->write); + break; + } + } + test++; + } + + *data = 0; + return 0; +} + +static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data) +{ + u16 temp; + u16 checksum = 0; + u16 i; + + *data = 0; + /* Read and add up the contents of the EEPROM */ + for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { + if ((adapter->hw.nvm.ops.read_nvm(&adapter->hw, i, 1, &temp)) + < 0) { + *data = 1; + break; + } + checksum += temp; + } + + /* If Checksum is not Correct return error else test passed */ + if ((checksum != (u16) NVM_SUM) && !(*data)) + *data = 2; + + return *data; +} + +static irqreturn_t igb_test_intr(int irq, void *data) +{ + struct net_device *netdev = (struct net_device *) data; + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + adapter->test_icr |= rd32(E1000_ICR); + + return IRQ_HANDLED; +} + +static int igb_intr_test(struct igb_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 mask, i = 0, shared_int = true; + u32 irq = adapter->pdev->irq; + + *data = 0; + + /* Hook up test interrupt handler just for this test */ + if (adapter->msix_entries) { + /* NOTE: we don't test MSI-X interrupts here, yet */ + return 0; + } else if (adapter->msi_enabled) { + shared_int = false; + if (request_irq(irq, &igb_test_intr, 0, netdev->name, netdev)) { + *data = 1; + return -1; + } + } else if (!request_irq(irq, &igb_test_intr, IRQF_PROBE_SHARED, + netdev->name, netdev)) { + shared_int = false; + } else if (request_irq(irq, &igb_test_intr, IRQF_SHARED, + netdev->name, netdev)) { + *data = 1; + return -1; + } + dev_info(&adapter->pdev->dev, "testing %s interrupt\n", + (shared_int ? "shared" : "unshared")); + + /* Disable all the interrupts */ + wr32(E1000_IMC, 0xFFFFFFFF); + msleep(10); + + /* Test each interrupt */ + for (; i < 10; i++) { + /* Interrupt to test */ + mask = 1 << i; + + if (!shared_int) { + /* Disable the interrupt to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + wr32(E1000_IMC, ~mask & 0x00007FFF); + wr32(E1000_ICS, ~mask & 0x00007FFF); + msleep(10); + + if (adapter->test_icr & mask) { + *data = 3; + break; + } + } + + /* Enable the interrupt to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was not posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + wr32(E1000_IMS, mask); + wr32(E1000_ICS, mask); + msleep(10); + + if (!(adapter->test_icr & mask)) { + *data = 4; + break; + } + + if (!shared_int) { + /* Disable the other interrupts to be reported in + * the cause register and then force the other + * interrupts and see if any get posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + wr32(E1000_IMC, ~mask & 0x00007FFF); + wr32(E1000_ICS, ~mask & 0x00007FFF); + msleep(10); + + if (adapter->test_icr) { + *data = 5; + break; + } + } + } + + /* Disable all the interrupts */ + wr32(E1000_IMC, 0xFFFFFFFF); + msleep(10); + + /* Unhook test interrupt handler */ + free_irq(irq, netdev); + + return *data; +} + +static void igb_free_desc_rings(struct igb_adapter *adapter) +{ + struct igb_ring *tx_ring = &adapter->test_tx_ring; + struct igb_ring *rx_ring = &adapter->test_rx_ring; + struct pci_dev *pdev = adapter->pdev; + int i; + + if (tx_ring->desc && tx_ring->buffer_info) { + for (i = 0; i < tx_ring->count; i++) { + struct igb_buffer *buf = &(tx_ring->buffer_info[i]); + if (buf->dma) + pci_unmap_single(pdev, buf->dma, buf->length, + PCI_DMA_TODEVICE); + if (buf->skb) + dev_kfree_skb(buf->skb); + } + } + + if (rx_ring->desc && rx_ring->buffer_info) { + for (i = 0; i < rx_ring->count; i++) { + struct igb_buffer *buf = &(rx_ring->buffer_info[i]); + if (buf->dma) + pci_unmap_single(pdev, buf->dma, + IGB_RXBUFFER_2048, + PCI_DMA_FROMDEVICE); + if (buf->skb) + dev_kfree_skb(buf->skb); + } + } + + if (tx_ring->desc) { + pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, + tx_ring->dma); + tx_ring->desc = NULL; + } + if (rx_ring->desc) { + pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, + rx_ring->dma); + rx_ring->desc = NULL; + } + + kfree(tx_ring->buffer_info); + tx_ring->buffer_info = NULL; + kfree(rx_ring->buffer_info); + rx_ring->buffer_info = NULL; + + return; +} + +static int igb_setup_desc_rings(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct igb_ring *tx_ring = &adapter->test_tx_ring; + struct igb_ring *rx_ring = &adapter->test_rx_ring; + struct pci_dev *pdev = adapter->pdev; + u32 rctl; + int i, ret_val; + + /* Setup Tx descriptor ring and Tx buffers */ + + if (!tx_ring->count) + tx_ring->count = IGB_DEFAULT_TXD; + + tx_ring->buffer_info = kcalloc(tx_ring->count, + sizeof(struct igb_buffer), + GFP_KERNEL); + if (!tx_ring->buffer_info) { + ret_val = 1; + goto err_nomem; + } + + tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc); + tx_ring->size = ALIGN(tx_ring->size, 4096); + tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size, + &tx_ring->dma); + if (!tx_ring->desc) { + ret_val = 2; + goto err_nomem; + } + tx_ring->next_to_use = tx_ring->next_to_clean = 0; + + wr32(E1000_TDBAL(0), + ((u64) tx_ring->dma & 0x00000000FFFFFFFF)); + wr32(E1000_TDBAH(0), ((u64) tx_ring->dma >> 32)); + wr32(E1000_TDLEN(0), + tx_ring->count * sizeof(struct e1000_tx_desc)); + wr32(E1000_TDH(0), 0); + wr32(E1000_TDT(0), 0); + wr32(E1000_TCTL, + E1000_TCTL_PSP | E1000_TCTL_EN | + E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT | + E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT); + + for (i = 0; i < tx_ring->count; i++) { + struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i); + struct sk_buff *skb; + unsigned int size = 1024; + + skb = alloc_skb(size, GFP_KERNEL); + if (!skb) { + ret_val = 3; + goto err_nomem; + } + skb_put(skb, size); + tx_ring->buffer_info[i].skb = skb; + tx_ring->buffer_info[i].length = skb->len; + tx_ring->buffer_info[i].dma = + pci_map_single(pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma); + tx_desc->lower.data = cpu_to_le32(skb->len); + tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP | + E1000_TXD_CMD_IFCS | + E1000_TXD_CMD_RS); + tx_desc->upper.data = 0; + } + + /* Setup Rx descriptor ring and Rx buffers */ + + if (!rx_ring->count) + rx_ring->count = IGB_DEFAULT_RXD; + + rx_ring->buffer_info = kcalloc(rx_ring->count, + sizeof(struct igb_buffer), + GFP_KERNEL); + if (!rx_ring->buffer_info) { + ret_val = 4; + goto err_nomem; + } + + rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc); + rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size, + &rx_ring->dma); + if (!rx_ring->desc) { + ret_val = 5; + goto err_nomem; + } + rx_ring->next_to_use = rx_ring->next_to_clean = 0; + + rctl = rd32(E1000_RCTL); + wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN); + wr32(E1000_RDBAL(0), + ((u64) rx_ring->dma & 0xFFFFFFFF)); + wr32(E1000_RDBAH(0), + ((u64) rx_ring->dma >> 32)); + wr32(E1000_RDLEN(0), rx_ring->size); + wr32(E1000_RDH(0), 0); + wr32(E1000_RDT(0), 0); + rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 | + E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | + (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); + wr32(E1000_RCTL, rctl); + wr32(E1000_SRRCTL(0), 0); + + for (i = 0; i < rx_ring->count; i++) { + struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i); + struct sk_buff *skb; + + skb = alloc_skb(IGB_RXBUFFER_2048 + NET_IP_ALIGN, + GFP_KERNEL); + if (!skb) { + ret_val = 6; + goto err_nomem; + } + skb_reserve(skb, NET_IP_ALIGN); + rx_ring->buffer_info[i].skb = skb; + rx_ring->buffer_info[i].dma = + pci_map_single(pdev, skb->data, IGB_RXBUFFER_2048, + PCI_DMA_FROMDEVICE); + rx_desc->buffer_addr = cpu_to_le64(rx_ring->buffer_info[i].dma); + memset(skb->data, 0x00, skb->len); + } + + return 0; + +err_nomem: + igb_free_desc_rings(adapter); + return ret_val; +} + +static void igb_phy_disable_receiver(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + /* Write out to PHY registers 29 and 30 to disable the Receiver. */ + hw->phy.ops.write_phy_reg(hw, 29, 0x001F); + hw->phy.ops.write_phy_reg(hw, 30, 0x8FFC); + hw->phy.ops.write_phy_reg(hw, 29, 0x001A); + hw->phy.ops.write_phy_reg(hw, 30, 0x8FF0); +} + +static int igb_integrated_phy_loopback(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_reg = 0; + u32 stat_reg = 0; + + hw->mac.autoneg = false; + + if (hw->phy.type == e1000_phy_m88) { + /* Auto-MDI/MDIX Off */ + hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); + /* reset to update Auto-MDI/MDIX */ + hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x9140); + /* autoneg off */ + hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x8140); + } + + ctrl_reg = rd32(E1000_CTRL); + + /* force 1000, set loopback */ + hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x4140); + + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg = rd32(E1000_CTRL); + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ + E1000_CTRL_FD); /* Force Duplex to FULL */ + + if (hw->phy.media_type == e1000_media_type_copper && + hw->phy.type == e1000_phy_m88) + ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ + else { + /* Set the ILOS bit on the fiber Nic if half duplex link is + * detected. */ + stat_reg = rd32(E1000_STATUS); + if ((stat_reg & E1000_STATUS_FD) == 0) + ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); + } + + wr32(E1000_CTRL, ctrl_reg); + + /* Disable the receiver on the PHY so when a cable is plugged in, the + * PHY does not begin to autoneg when a cable is reconnected to the NIC. + */ + if (hw->phy.type == e1000_phy_m88) + igb_phy_disable_receiver(adapter); + + udelay(500); + + return 0; +} + +static int igb_set_phy_loopback(struct igb_adapter *adapter) +{ + return igb_integrated_phy_loopback(adapter); +} + +static int igb_setup_loopback_test(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + + if (hw->phy.media_type == e1000_media_type_fiber || + hw->phy.media_type == e1000_media_type_internal_serdes) { + rctl = rd32(E1000_RCTL); + rctl |= E1000_RCTL_LBM_TCVR; + wr32(E1000_RCTL, rctl); + return 0; + } else if (hw->phy.media_type == e1000_media_type_copper) { + return igb_set_phy_loopback(adapter); + } + + return 7; +} + +static void igb_loopback_cleanup(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + u16 phy_reg; + + rctl = rd32(E1000_RCTL); + rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); + wr32(E1000_RCTL, rctl); + + hw->mac.autoneg = true; + hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_reg); + if (phy_reg & MII_CR_LOOPBACK) { + phy_reg &= ~MII_CR_LOOPBACK; + hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_reg); + igb_phy_sw_reset(hw); + } +} + +static void igb_create_lbtest_frame(struct sk_buff *skb, + unsigned int frame_size) +{ + memset(skb->data, 0xFF, frame_size); + frame_size &= ~1; + memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1); + memset(&skb->data[frame_size / 2 + 10], 0xBE, 1); + memset(&skb->data[frame_size / 2 + 12], 0xAF, 1); +} + +static int igb_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size) +{ + frame_size &= ~1; + if (*(skb->data + 3) == 0xFF) + if ((*(skb->data + frame_size / 2 + 10) == 0xBE) && + (*(skb->data + frame_size / 2 + 12) == 0xAF)) + return 0; + return 13; +} + +static int igb_run_loopback_test(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct igb_ring *tx_ring = &adapter->test_tx_ring; + struct igb_ring *rx_ring = &adapter->test_rx_ring; + struct pci_dev *pdev = adapter->pdev; + int i, j, k, l, lc, good_cnt; + int ret_val = 0; + unsigned long time; + + wr32(E1000_RDT(0), rx_ring->count - 1); + + /* Calculate the loop count based on the largest descriptor ring + * The idea is to wrap the largest ring a number of times using 64 + * send/receive pairs during each loop + */ + + if (rx_ring->count <= tx_ring->count) + lc = ((tx_ring->count / 64) * 2) + 1; + else + lc = ((rx_ring->count / 64) * 2) + 1; + + k = l = 0; + for (j = 0; j <= lc; j++) { /* loop count loop */ + for (i = 0; i < 64; i++) { /* send the packets */ + igb_create_lbtest_frame(tx_ring->buffer_info[k].skb, + 1024); + pci_dma_sync_single_for_device(pdev, + tx_ring->buffer_info[k].dma, + tx_ring->buffer_info[k].length, + PCI_DMA_TODEVICE); + k++; + if (k == tx_ring->count) + k = 0; + } + wr32(E1000_TDT(0), k); + msleep(200); + time = jiffies; /* set the start time for the receive */ + good_cnt = 0; + do { /* receive the sent packets */ + pci_dma_sync_single_for_cpu(pdev, + rx_ring->buffer_info[l].dma, + IGB_RXBUFFER_2048, + PCI_DMA_FROMDEVICE); + + ret_val = igb_check_lbtest_frame( + rx_ring->buffer_info[l].skb, 1024); + if (!ret_val) + good_cnt++; + l++; + if (l == rx_ring->count) + l = 0; + /* time + 20 msecs (200 msecs on 2.4) is more than + * enough time to complete the receives, if it's + * exceeded, break and error off + */ + } while (good_cnt < 64 && jiffies < (time + 20)); + if (good_cnt != 64) { + ret_val = 13; /* ret_val is the same as mis-compare */ + break; + } + if (jiffies >= (time + 20)) { + ret_val = 14; /* error code for time out error */ + break; + } + } /* end loop count loop */ + return ret_val; +} + +static int igb_loopback_test(struct igb_adapter *adapter, u64 *data) +{ + /* PHY loopback cannot be performed if SoL/IDER + * sessions are active */ + if (igb_check_reset_block(&adapter->hw)) { + dev_err(&adapter->pdev->dev, + "Cannot do PHY loopback test " + "when SoL/IDER is active.\n"); + *data = 0; + goto out; + } + *data = igb_setup_desc_rings(adapter); + if (*data) + goto out; + *data = igb_setup_loopback_test(adapter); + if (*data) + goto err_loopback; + *data = igb_run_loopback_test(adapter); + igb_loopback_cleanup(adapter); + +err_loopback: + igb_free_desc_rings(adapter); +out: + return *data; +} + +static int igb_link_test(struct igb_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + *data = 0; + if (hw->phy.media_type == e1000_media_type_internal_serdes) { + int i = 0; + hw->mac.serdes_has_link = false; + + /* On some blade server designs, link establishment + * could take as long as 2-3 minutes */ + do { + hw->mac.ops.check_for_link(&adapter->hw); + if (hw->mac.serdes_has_link) + return *data; + msleep(20); + } while (i++ < 3750); + + *data = 1; + } else { + hw->mac.ops.check_for_link(&adapter->hw); + if (hw->mac.autoneg) + msleep(4000); + + if (!(rd32(E1000_STATUS) & + E1000_STATUS_LU)) + *data = 1; + } + return *data; +} + +static void igb_diag_test(struct net_device *netdev, + struct ethtool_test *eth_test, u64 *data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + u16 autoneg_advertised; + u8 forced_speed_duplex, autoneg; + bool if_running = netif_running(netdev); + + set_bit(__IGB_TESTING, &adapter->state); + if (eth_test->flags == ETH_TEST_FL_OFFLINE) { + /* Offline tests */ + + /* save speed, duplex, autoneg settings */ + autoneg_advertised = adapter->hw.phy.autoneg_advertised; + forced_speed_duplex = adapter->hw.mac.forced_speed_duplex; + autoneg = adapter->hw.mac.autoneg; + + dev_info(&adapter->pdev->dev, "offline testing starting\n"); + + /* Link test performed before hardware reset so autoneg doesn't + * interfere with test result */ + if (igb_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + if (if_running) + /* indicate we're in test mode */ + dev_close(netdev); + else + igb_reset(adapter); + + if (igb_reg_test(adapter, &data[0])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + igb_reset(adapter); + if (igb_eeprom_test(adapter, &data[1])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + igb_reset(adapter); + if (igb_intr_test(adapter, &data[2])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + igb_reset(adapter); + if (igb_loopback_test(adapter, &data[3])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* restore speed, duplex, autoneg settings */ + adapter->hw.phy.autoneg_advertised = autoneg_advertised; + adapter->hw.mac.forced_speed_duplex = forced_speed_duplex; + adapter->hw.mac.autoneg = autoneg; + + /* force this routine to wait until autoneg complete/timeout */ + adapter->hw.phy.autoneg_wait_to_complete = true; + igb_reset(adapter); + adapter->hw.phy.autoneg_wait_to_complete = false; + + clear_bit(__IGB_TESTING, &adapter->state); + if (if_running) + dev_open(netdev); + } else { + dev_info(&adapter->pdev->dev, "online testing starting\n"); + /* Online tests */ + if (igb_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* Online tests aren't run; pass by default */ + data[0] = 0; + data[1] = 0; + data[2] = 0; + data[3] = 0; + + clear_bit(__IGB_TESTING, &adapter->state); + } + msleep_interruptible(4 * 1000); +} + +static int igb_wol_exclusion(struct igb_adapter *adapter, + struct ethtool_wolinfo *wol) +{ + struct e1000_hw *hw = &adapter->hw; + int retval = 1; /* fail by default */ + + switch (hw->device_id) { + case E1000_DEV_ID_82575GB_QUAD_COPPER: + /* WoL not supported */ + wol->supported = 0; + break; + case E1000_DEV_ID_82575EB_FIBER_SERDES: + /* Wake events not supported on port B */ + if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) { + wol->supported = 0; + break; + } + /* return success for non excluded adapter ports */ + retval = 0; + break; + default: + /* dual port cards only support WoL on port A from now on + * unless it was enabled in the eeprom for port B + * so exclude FUNC_1 ports from having WoL enabled */ + if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1 && + !adapter->eeprom_wol) { + wol->supported = 0; + break; + } + + retval = 0; + } + + return retval; +} + +static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC; + wol->wolopts = 0; + + /* this function will set ->supported = 0 and return 1 if wol is not + * supported by this hardware */ + if (igb_wol_exclusion(adapter, wol)) + return; + + /* apply any specific unsupported masks here */ + switch (adapter->hw.device_id) { + default: + break; + } + + if (adapter->wol & E1000_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & E1000_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & E1000_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & E1000_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + + return; +} + +static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + if (igb_wol_exclusion(adapter, wol)) + return wol->wolopts ? -EOPNOTSUPP : 0; + + switch (hw->device_id) { + default: + break; + } + + /* these settings will always override what we currently have */ + adapter->wol = 0; + + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= E1000_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= E1000_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= E1000_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= E1000_WUFC_MAG; + + return 0; +} + +/* toggle LED 4 times per second = 2 "blinks" per second */ +#define IGB_ID_INTERVAL (HZ/4) + +/* bit defines for adapter->led_status */ +#define IGB_LED_ON 0 + +static int igb_phys_id(struct net_device *netdev, u32 data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) + data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); + + igb_blink_led(hw); + msleep_interruptible(data * 1000); + + igb_led_off(hw); + clear_bit(IGB_LED_ON, &adapter->led_status); + igb_cleanup_led(hw); + + return 0; +} + +static int igb_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) || + ((ec->rx_coalesce_usecs > 3) && + (ec->rx_coalesce_usecs < IGB_MIN_ITR_USECS)) || + (ec->rx_coalesce_usecs == 2)) + return -EINVAL; + + /* convert to rate of irq's per second */ + if (ec->rx_coalesce_usecs <= 3) + adapter->itr_setting = ec->rx_coalesce_usecs; + else + adapter->itr_setting = (1000000 / ec->rx_coalesce_usecs); + + if (netif_running(netdev)) + igb_reinit_locked(adapter); + + return 0; +} + +static int igb_get_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + if (adapter->itr_setting <= 3) + ec->rx_coalesce_usecs = adapter->itr_setting; + else + ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting; + + return 0; +} + + +static int igb_nway_reset(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + if (netif_running(netdev)) + igb_reinit_locked(adapter); + return 0; +} + +static int igb_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return IGB_STATS_LEN; + case ETH_SS_TEST: + return IGB_TEST_LEN; + default: + return -ENOTSUPP; + } +} + +static void igb_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + u64 *queue_stat; + int stat_count = sizeof(struct igb_queue_stats) / sizeof(u64); + int j; + int i; + + igb_update_stats(adapter); + for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) { + char *p = (char *)adapter+igb_gstrings_stats[i].stat_offset; + data[i] = (igb_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + for (j = 0; j < adapter->num_rx_queues; j++) { + int k; + queue_stat = (u64 *)&adapter->rx_ring[j].rx_stats; + for (k = 0; k < stat_count; k++) + data[i + k] = queue_stat[k]; + i += k; + } +} + +static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_TEST: + memcpy(data, *igb_gstrings_test, + IGB_TEST_LEN*ETH_GSTRING_LEN); + break; + case ETH_SS_STATS: + for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) { + memcpy(p, igb_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_tx_queues; i++) { + sprintf(p, "tx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + sprintf(p, "rx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + } +/* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */ + break; + } +} + +static struct ethtool_ops igb_ethtool_ops = { + .get_settings = igb_get_settings, + .set_settings = igb_set_settings, + .get_drvinfo = igb_get_drvinfo, + .get_regs_len = igb_get_regs_len, + .get_regs = igb_get_regs, + .get_wol = igb_get_wol, + .set_wol = igb_set_wol, + .get_msglevel = igb_get_msglevel, + .set_msglevel = igb_set_msglevel, + .nway_reset = igb_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = igb_get_eeprom_len, + .get_eeprom = igb_get_eeprom, + .set_eeprom = igb_set_eeprom, + .get_ringparam = igb_get_ringparam, + .set_ringparam = igb_set_ringparam, + .get_pauseparam = igb_get_pauseparam, + .set_pauseparam = igb_set_pauseparam, + .get_rx_csum = igb_get_rx_csum, + .set_rx_csum = igb_set_rx_csum, + .get_tx_csum = igb_get_tx_csum, + .set_tx_csum = igb_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = igb_set_tso, + .self_test = igb_diag_test, + .get_strings = igb_get_strings, + .phys_id = igb_phys_id, + .get_sset_count = igb_get_sset_count, + .get_ethtool_stats = igb_get_ethtool_stats, + .get_coalesce = igb_get_coalesce, + .set_coalesce = igb_set_coalesce, +}; + +void igb_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &igb_ethtool_ops); +} diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c new file mode 100644 index 00000000000..f3c144d5d72 --- /dev/null +++ b/drivers/net/igb/igb_main.c @@ -0,0 +1,4138 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/pagemap.h> +#include <linux/netdevice.h> +#include <linux/tcp.h> +#include <linux/ipv6.h> +#include <net/checksum.h> +#include <net/ip6_checksum.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/if_ether.h> + +#include "igb.h" + +#define DRV_VERSION "1.0.8-k2" +char igb_driver_name[] = "igb"; +char igb_driver_version[] = DRV_VERSION; +static const char igb_driver_string[] = + "Intel(R) Gigabit Ethernet Network Driver"; +static const char igb_copyright[] = "Copyright (c) 2007 Intel Corporation."; + + +static const struct e1000_info *igb_info_tbl[] = { + [board_82575] = &e1000_82575_info, +}; + +static struct pci_device_id igb_pci_tbl[] = { + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 }, + /* required last entry */ + {0, } +}; + +MODULE_DEVICE_TABLE(pci, igb_pci_tbl); + +void igb_reset(struct igb_adapter *); +static int igb_setup_all_tx_resources(struct igb_adapter *); +static int igb_setup_all_rx_resources(struct igb_adapter *); +static void igb_free_all_tx_resources(struct igb_adapter *); +static void igb_free_all_rx_resources(struct igb_adapter *); +static void igb_free_tx_resources(struct igb_adapter *, struct igb_ring *); +static void igb_free_rx_resources(struct igb_adapter *, struct igb_ring *); +void igb_update_stats(struct igb_adapter *); +static int igb_probe(struct pci_dev *, const struct pci_device_id *); +static void __devexit igb_remove(struct pci_dev *pdev); +static int igb_sw_init(struct igb_adapter *); +static int igb_open(struct net_device *); +static int igb_close(struct net_device *); +static void igb_configure_tx(struct igb_adapter *); +static void igb_configure_rx(struct igb_adapter *); +static void igb_setup_rctl(struct igb_adapter *); +static void igb_clean_all_tx_rings(struct igb_adapter *); +static void igb_clean_all_rx_rings(struct igb_adapter *); +static void igb_clean_tx_ring(struct igb_adapter *, struct igb_ring *); +static void igb_clean_rx_ring(struct igb_adapter *, struct igb_ring *); +static void igb_set_multi(struct net_device *); +static void igb_update_phy_info(unsigned long); +static void igb_watchdog(unsigned long); +static void igb_watchdog_task(struct work_struct *); +static int igb_xmit_frame_ring_adv(struct sk_buff *, struct net_device *, + struct igb_ring *); +static int igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *); +static struct net_device_stats *igb_get_stats(struct net_device *); +static int igb_change_mtu(struct net_device *, int); +static int igb_set_mac(struct net_device *, void *); +static irqreturn_t igb_intr(int irq, void *); +static irqreturn_t igb_intr_msi(int irq, void *); +static irqreturn_t igb_msix_other(int irq, void *); +static irqreturn_t igb_msix_rx(int irq, void *); +static irqreturn_t igb_msix_tx(int irq, void *); +static int igb_clean_rx_ring_msix(struct napi_struct *, int); +static bool igb_clean_tx_irq(struct igb_adapter *, struct igb_ring *); +static int igb_clean(struct napi_struct *, int); +static bool igb_clean_rx_irq_adv(struct igb_adapter *, + struct igb_ring *, int *, int); +static void igb_alloc_rx_buffers_adv(struct igb_adapter *, + struct igb_ring *, int); +static int igb_ioctl(struct net_device *, struct ifreq *, int cmd); +static void igb_tx_timeout(struct net_device *); +static void igb_reset_task(struct work_struct *); +static void igb_vlan_rx_register(struct net_device *, struct vlan_group *); +static void igb_vlan_rx_add_vid(struct net_device *, u16); +static void igb_vlan_rx_kill_vid(struct net_device *, u16); +static void igb_restore_vlan(struct igb_adapter *); + +static int igb_suspend(struct pci_dev *, pm_message_t); +#ifdef CONFIG_PM +static int igb_resume(struct pci_dev *); +#endif +static void igb_shutdown(struct pci_dev *); + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* for netdump / net console */ +static void igb_netpoll(struct net_device *); +#endif + +static pci_ers_result_t igb_io_error_detected(struct pci_dev *, + pci_channel_state_t); +static pci_ers_result_t igb_io_slot_reset(struct pci_dev *); +static void igb_io_resume(struct pci_dev *); + +static struct pci_error_handlers igb_err_handler = { + .error_detected = igb_io_error_detected, + .slot_reset = igb_io_slot_reset, + .resume = igb_io_resume, +}; + + +static struct pci_driver igb_driver = { + .name = igb_driver_name, + .id_table = igb_pci_tbl, + .probe = igb_probe, + .remove = __devexit_p(igb_remove), +#ifdef CONFIG_PM + /* Power Managment Hooks */ + .suspend = igb_suspend, + .resume = igb_resume, +#endif + .shutdown = igb_shutdown, + .err_handler = &igb_err_handler +}; + +MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>"); +MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +#ifdef DEBUG +/** + * igb_get_hw_dev_name - return device name string + * used by hardware layer to print debugging information + **/ +char *igb_get_hw_dev_name(struct e1000_hw *hw) +{ + struct igb_adapter *adapter = hw->back; + return adapter->netdev->name; +} +#endif + +/** + * igb_init_module - Driver Registration Routine + * + * igb_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + **/ +static int __init igb_init_module(void) +{ + int ret; + printk(KERN_INFO "%s - version %s\n", + igb_driver_string, igb_driver_version); + + printk(KERN_INFO "%s\n", igb_copyright); + + ret = pci_register_driver(&igb_driver); + return ret; +} + +module_init(igb_init_module); + +/** + * igb_exit_module - Driver Exit Cleanup Routine + * + * igb_exit_module is called just before the driver is removed + * from memory. + **/ +static void __exit igb_exit_module(void) +{ + pci_unregister_driver(&igb_driver); +} + +module_exit(igb_exit_module); + +/** + * igb_alloc_queues - Allocate memory for all rings + * @adapter: board private structure to initialize + * + * We allocate one ring per queue at run-time since we don't know the + * number of queues at compile-time. + **/ +static int igb_alloc_queues(struct igb_adapter *adapter) +{ + int i; + + adapter->tx_ring = kcalloc(adapter->num_tx_queues, + sizeof(struct igb_ring), GFP_KERNEL); + if (!adapter->tx_ring) + return -ENOMEM; + + adapter->rx_ring = kcalloc(adapter->num_rx_queues, + sizeof(struct igb_ring), GFP_KERNEL); + if (!adapter->rx_ring) { + kfree(adapter->tx_ring); + return -ENOMEM; + } + + for (i = 0; i < adapter->num_rx_queues; i++) { + struct igb_ring *ring = &(adapter->rx_ring[i]); + ring->adapter = adapter; + ring->itr_register = E1000_ITR; + + if (!ring->napi.poll) + netif_napi_add(adapter->netdev, &ring->napi, igb_clean, + adapter->napi.weight / + adapter->num_rx_queues); + } + return 0; +} + +#define IGB_N0_QUEUE -1 +static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue, + int tx_queue, int msix_vector) +{ + u32 msixbm = 0; + struct e1000_hw *hw = &adapter->hw; + /* The 82575 assigns vectors using a bitmask, which matches the + bitmask for the EICR/EIMS/EIMC registers. To assign one + or more queues to a vector, we write the appropriate bits + into the MSIXBM register for that vector. */ + if (rx_queue > IGB_N0_QUEUE) { + msixbm = E1000_EICR_RX_QUEUE0 << rx_queue; + adapter->rx_ring[rx_queue].eims_value = msixbm; + } + if (tx_queue > IGB_N0_QUEUE) { + msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue; + adapter->tx_ring[tx_queue].eims_value = + E1000_EICR_TX_QUEUE0 << tx_queue; + } + array_wr32(E1000_MSIXBM(0), msix_vector, msixbm); +} + +/** + * igb_configure_msix - Configure MSI-X hardware + * + * igb_configure_msix sets up the hardware to properly + * generate MSI-X interrupts. + **/ +static void igb_configure_msix(struct igb_adapter *adapter) +{ + u32 tmp; + int i, vector = 0; + struct e1000_hw *hw = &adapter->hw; + + adapter->eims_enable_mask = 0; + + for (i = 0; i < adapter->num_tx_queues; i++) { + struct igb_ring *tx_ring = &adapter->tx_ring[i]; + igb_assign_vector(adapter, IGB_N0_QUEUE, i, vector++); + adapter->eims_enable_mask |= tx_ring->eims_value; + if (tx_ring->itr_val) + writel(1000000000 / (tx_ring->itr_val * 256), + hw->hw_addr + tx_ring->itr_register); + else + writel(1, hw->hw_addr + tx_ring->itr_register); + } + + for (i = 0; i < adapter->num_rx_queues; i++) { + struct igb_ring *rx_ring = &adapter->rx_ring[i]; + igb_assign_vector(adapter, i, IGB_N0_QUEUE, vector++); + adapter->eims_enable_mask |= rx_ring->eims_value; + if (rx_ring->itr_val) + writel(1000000000 / (rx_ring->itr_val * 256), + hw->hw_addr + rx_ring->itr_register); + else + writel(1, hw->hw_addr + rx_ring->itr_register); + } + + + /* set vector for other causes, i.e. link changes */ + array_wr32(E1000_MSIXBM(0), vector++, + E1000_EIMS_OTHER); + + /* disable IAM for ICR interrupt bits */ + wr32(E1000_IAM, 0); + + tmp = rd32(E1000_CTRL_EXT); + /* enable MSI-X PBA support*/ + tmp |= E1000_CTRL_EXT_PBA_CLR; + + /* Auto-Mask interrupts upon ICR read. */ + tmp |= E1000_CTRL_EXT_EIAME; + tmp |= E1000_CTRL_EXT_IRCA; + + wr32(E1000_CTRL_EXT, tmp); + adapter->eims_enable_mask |= E1000_EIMS_OTHER; + + wrfl(); +} + +/** + * igb_request_msix - Initialize MSI-X interrupts + * + * igb_request_msix allocates MSI-X vectors and requests interrupts from the + * kernel. + **/ +static int igb_request_msix(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int i, err = 0, vector = 0; + + vector = 0; + + for (i = 0; i < adapter->num_tx_queues; i++) { + struct igb_ring *ring = &(adapter->tx_ring[i]); + sprintf(ring->name, "%s-tx%d", netdev->name, i); + err = request_irq(adapter->msix_entries[vector].vector, + &igb_msix_tx, 0, ring->name, + &(adapter->tx_ring[i])); + if (err) + goto out; + ring->itr_register = E1000_EITR(0) + (vector << 2); + ring->itr_val = adapter->itr; + vector++; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + struct igb_ring *ring = &(adapter->rx_ring[i]); + if (strlen(netdev->name) < (IFNAMSIZ - 5)) + sprintf(ring->name, "%s-rx%d", netdev->name, i); + else + memcpy(ring->name, netdev->name, IFNAMSIZ); + err = request_irq(adapter->msix_entries[vector].vector, + &igb_msix_rx, 0, ring->name, + &(adapter->rx_ring[i])); + if (err) + goto out; + ring->itr_register = E1000_EITR(0) + (vector << 2); + ring->itr_val = adapter->itr; + vector++; + } + + err = request_irq(adapter->msix_entries[vector].vector, + &igb_msix_other, 0, netdev->name, netdev); + if (err) + goto out; + + adapter->napi.poll = igb_clean_rx_ring_msix; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].napi.poll = adapter->napi.poll; + igb_configure_msix(adapter); + return 0; +out: + return err; +} + +static void igb_reset_interrupt_capability(struct igb_adapter *adapter) +{ + if (adapter->msix_entries) { + pci_disable_msix(adapter->pdev); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + } else if (adapter->msi_enabled) + pci_disable_msi(adapter->pdev); + return; +} + + +/** + * igb_set_interrupt_capability - set MSI or MSI-X if supported + * + * Attempt to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +static void igb_set_interrupt_capability(struct igb_adapter *adapter) +{ + int err; + int numvecs, i; + + numvecs = adapter->num_tx_queues + adapter->num_rx_queues + 1; + adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry), + GFP_KERNEL); + if (!adapter->msix_entries) + goto msi_only; + + for (i = 0; i < numvecs; i++) + adapter->msix_entries[i].entry = i; + + err = pci_enable_msix(adapter->pdev, + adapter->msix_entries, + numvecs); + if (err == 0) + return; + + igb_reset_interrupt_capability(adapter); + + /* If we can't do MSI-X, try MSI */ +msi_only: + adapter->num_rx_queues = 1; + if (!pci_enable_msi(adapter->pdev)) + adapter->msi_enabled = 1; + return; +} + +/** + * igb_request_irq - initialize interrupts + * + * Attempts to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +static int igb_request_irq(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + int err = 0; + + if (adapter->msix_entries) { + err = igb_request_msix(adapter); + if (!err) { + struct e1000_hw *hw = &adapter->hw; + /* enable IAM, auto-mask, + * DO NOT USE EIAME or IAME in legacy mode */ + wr32(E1000_IAM, IMS_ENABLE_MASK); + goto request_done; + } + /* fall back to MSI */ + igb_reset_interrupt_capability(adapter); + if (!pci_enable_msi(adapter->pdev)) + adapter->msi_enabled = 1; + igb_free_all_tx_resources(adapter); + igb_free_all_rx_resources(adapter); + adapter->num_rx_queues = 1; + igb_alloc_queues(adapter); + } + if (adapter->msi_enabled) { + err = request_irq(adapter->pdev->irq, &igb_intr_msi, 0, + netdev->name, netdev); + if (!err) + goto request_done; + /* fall back to legacy interrupts */ + igb_reset_interrupt_capability(adapter); + adapter->msi_enabled = 0; + } + + err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED, + netdev->name, netdev); + + if (err) { + dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n", + err); + goto request_done; + } + + /* enable IAM, auto-mask */ + wr32(E1000_IAM, IMS_ENABLE_MASK); + +request_done: + return err; +} + +static void igb_free_irq(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + if (adapter->msix_entries) { + int vector = 0, i; + + for (i = 0; i < adapter->num_tx_queues; i++) + free_irq(adapter->msix_entries[vector++].vector, + &(adapter->tx_ring[i])); + for (i = 0; i < adapter->num_rx_queues; i++) + free_irq(adapter->msix_entries[vector++].vector, + &(adapter->rx_ring[i])); + + free_irq(adapter->msix_entries[vector++].vector, netdev); + return; + } + + free_irq(adapter->pdev->irq, netdev); +} + +/** + * igb_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + **/ +static void igb_irq_disable(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + if (adapter->msix_entries) { + wr32(E1000_EIMC, ~0); + wr32(E1000_EIAC, 0); + } + wr32(E1000_IMC, ~0); + wrfl(); + synchronize_irq(adapter->pdev->irq); +} + +/** + * igb_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + **/ +static void igb_irq_enable(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + if (adapter->msix_entries) { + wr32(E1000_EIMS, + adapter->eims_enable_mask); + wr32(E1000_EIAC, + adapter->eims_enable_mask); + wr32(E1000_IMS, E1000_IMS_LSC); + } else + wr32(E1000_IMS, IMS_ENABLE_MASK); +} + +static void igb_update_mng_vlan(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + u16 vid = adapter->hw.mng_cookie.vlan_id; + u16 old_vid = adapter->mng_vlan_id; + if (adapter->vlgrp) { + if (!vlan_group_get_device(adapter->vlgrp, vid)) { + if (adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { + igb_vlan_rx_add_vid(netdev, vid); + adapter->mng_vlan_id = vid; + } else + adapter->mng_vlan_id = IGB_MNG_VLAN_NONE; + + if ((old_vid != (u16)IGB_MNG_VLAN_NONE) && + (vid != old_vid) && + !vlan_group_get_device(adapter->vlgrp, old_vid)) + igb_vlan_rx_kill_vid(netdev, old_vid); + } else + adapter->mng_vlan_id = vid; + } +} + +/** + * igb_release_hw_control - release control of the h/w to f/w + * @adapter: address of board private structure + * + * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that the + * driver is no longer loaded. + * + **/ +static void igb_release_hw_control(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_ext; + + /* Let firmware take over control of h/w */ + ctrl_ext = rd32(E1000_CTRL_EXT); + wr32(E1000_CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); +} + + +/** + * igb_get_hw_control - get control of the h/w from f/w + * @adapter: address of board private structure + * + * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that + * the driver is loaded. + * + **/ +static void igb_get_hw_control(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_ext; + + /* Let firmware know the driver has taken over */ + ctrl_ext = rd32(E1000_CTRL_EXT); + wr32(E1000_CTRL_EXT, + ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); +} + +static void igb_init_manageability(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + if (adapter->en_mng_pt) { + u32 manc2h = rd32(E1000_MANC2H); + u32 manc = rd32(E1000_MANC); + + /* disable hardware interception of ARP */ + manc &= ~(E1000_MANC_ARP_EN); + + /* enable receiving management packets to the host */ + /* this will probably generate destination unreachable messages + * from the host OS, but the packets will be handled on SMBUS */ + manc |= E1000_MANC_EN_MNG2HOST; +#define E1000_MNG2HOST_PORT_623 (1 << 5) +#define E1000_MNG2HOST_PORT_664 (1 << 6) + manc2h |= E1000_MNG2HOST_PORT_623; + manc2h |= E1000_MNG2HOST_PORT_664; + wr32(E1000_MANC2H, manc2h); + + wr32(E1000_MANC, manc); + } +} + +static void igb_release_manageability(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + if (adapter->en_mng_pt) { + u32 manc = rd32(E1000_MANC); + + /* re-enable hardware interception of ARP */ + manc |= E1000_MANC_ARP_EN; + manc &= ~E1000_MANC_EN_MNG2HOST; + + /* don't explicitly have to mess with MANC2H since + * MANC has an enable disable that gates MANC2H */ + + /* XXX stop the hardware watchdog ? */ + wr32(E1000_MANC, manc); + } +} + +/** + * igb_configure - configure the hardware for RX and TX + * @adapter: private board structure + **/ +static void igb_configure(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int i; + + igb_get_hw_control(adapter); + igb_set_multi(netdev); + + igb_restore_vlan(adapter); + igb_init_manageability(adapter); + + igb_configure_tx(adapter); + igb_setup_rctl(adapter); + igb_configure_rx(adapter); + /* call IGB_DESC_UNUSED which always leaves + * at least 1 descriptor unused to make sure + * next_to_use != next_to_clean */ + for (i = 0; i < adapter->num_rx_queues; i++) { + struct igb_ring *ring = &adapter->rx_ring[i]; + igb_alloc_rx_buffers_adv(adapter, ring, IGB_DESC_UNUSED(ring)); + } + + + adapter->tx_queue_len = netdev->tx_queue_len; +} + + +/** + * igb_up - Open the interface and prepare it to handle traffic + * @adapter: board private structure + **/ + +int igb_up(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + + /* hardware has been reset, we need to reload some things */ + igb_configure(adapter); + + clear_bit(__IGB_DOWN, &adapter->state); + + napi_enable(&adapter->napi); + + if (adapter->msix_entries) { + for (i = 0; i < adapter->num_rx_queues; i++) + napi_enable(&adapter->rx_ring[i].napi); + igb_configure_msix(adapter); + } + + /* Clear any pending interrupts. */ + rd32(E1000_ICR); + igb_irq_enable(adapter); + + /* Fire a link change interrupt to start the watchdog. */ + wr32(E1000_ICS, E1000_ICS_LSC); + return 0; +} + +void igb_down(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 tctl, rctl; + int i; + + /* signal that we're down so the interrupt handler does not + * reschedule our watchdog timer */ + set_bit(__IGB_DOWN, &adapter->state); + + /* disable receives in the hardware */ + rctl = rd32(E1000_RCTL); + wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN); + /* flush and sleep below */ + + netif_stop_queue(netdev); + + /* disable transmits in the hardware */ + tctl = rd32(E1000_TCTL); + tctl &= ~E1000_TCTL_EN; + wr32(E1000_TCTL, tctl); + /* flush both disables and wait for them to finish */ + wrfl(); + msleep(10); + + napi_disable(&adapter->napi); + + if (adapter->msix_entries) + for (i = 0; i < adapter->num_rx_queues; i++) + napi_disable(&adapter->rx_ring[i].napi); + igb_irq_disable(adapter); + + del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->phy_info_timer); + + netdev->tx_queue_len = adapter->tx_queue_len; + netif_carrier_off(netdev); + adapter->link_speed = 0; + adapter->link_duplex = 0; + + igb_reset(adapter); + igb_clean_all_tx_rings(adapter); + igb_clean_all_rx_rings(adapter); +} + +void igb_reinit_locked(struct igb_adapter *adapter) +{ + WARN_ON(in_interrupt()); + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + msleep(1); + igb_down(adapter); + igb_up(adapter); + clear_bit(__IGB_RESETTING, &adapter->state); +} + +void igb_reset(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_fc_info *fc = &adapter->hw.fc; + u32 pba = 0, tx_space, min_tx_space, min_rx_space; + u16 hwm; + + /* Repartition Pba for greater than 9k mtu + * To take effect CTRL.RST is required. + */ + pba = E1000_PBA_34K; + + if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { + /* adjust PBA for jumbo frames */ + wr32(E1000_PBA, pba); + + /* To maintain wire speed transmits, the Tx FIFO should be + * large enough to accommodate two full transmit packets, + * rounded up to the next 1KB and expressed in KB. Likewise, + * the Rx FIFO should be large enough to accommodate at least + * one full receive packet and is similarly rounded up and + * expressed in KB. */ + pba = rd32(E1000_PBA); + /* upper 16 bits has Tx packet buffer allocation size in KB */ + tx_space = pba >> 16; + /* lower 16 bits has Rx packet buffer allocation size in KB */ + pba &= 0xffff; + /* the tx fifo also stores 16 bytes of information about the tx + * but don't include ethernet FCS because hardware appends it */ + min_tx_space = (adapter->max_frame_size + + sizeof(struct e1000_tx_desc) - + ETH_FCS_LEN) * 2; + min_tx_space = ALIGN(min_tx_space, 1024); + min_tx_space >>= 10; + /* software strips receive CRC, so leave room for it */ + min_rx_space = adapter->max_frame_size; + min_rx_space = ALIGN(min_rx_space, 1024); + min_rx_space >>= 10; + + /* If current Tx allocation is less than the min Tx FIFO size, + * and the min Tx FIFO size is less than the current Rx FIFO + * allocation, take space away from current Rx allocation */ + if (tx_space < min_tx_space && + ((min_tx_space - tx_space) < pba)) { + pba = pba - (min_tx_space - tx_space); + + /* if short on rx space, rx wins and must trump tx + * adjustment */ + if (pba < min_rx_space) + pba = min_rx_space; + } + } + wr32(E1000_PBA, pba); + + /* flow control settings */ + /* The high water mark must be low enough to fit one full frame + * (or the size used for early receive) above it in the Rx FIFO. + * Set it to the lower of: + * - 90% of the Rx FIFO size, or + * - the full Rx FIFO size minus one full frame */ + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - adapter->max_frame_size)); + + fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */ + fc->low_water = fc->high_water - 8; + fc->pause_time = 0xFFFF; + fc->send_xon = 1; + fc->type = fc->original_type; + + /* Allow time for pending master requests to run */ + adapter->hw.mac.ops.reset_hw(&adapter->hw); + wr32(E1000_WUC, 0); + + if (adapter->hw.mac.ops.init_hw(&adapter->hw)) + dev_err(&adapter->pdev->dev, "Hardware Error\n"); + + igb_update_mng_vlan(adapter); + + /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ + wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE); + + igb_reset_adaptive(&adapter->hw); + adapter->hw.phy.ops.get_phy_info(&adapter->hw); + igb_release_manageability(adapter); +} + +/** + * igb_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in igb_pci_tbl + * + * Returns 0 on success, negative on failure + * + * igb_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +static int __devinit igb_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct igb_adapter *adapter; + struct e1000_hw *hw; + const struct e1000_info *ei = igb_info_tbl[ent->driver_data]; + unsigned long mmio_start, mmio_len; + static int cards_found; + int i, err, pci_using_dac; + u16 eeprom_data = 0; + u16 eeprom_apme_mask = IGB_EEPROM_APME; + u32 part_num; + + err = pci_enable_device(pdev); + if (err) + return err; + + pci_using_dac = 0; + err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + if (!err) { + err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (!err) + pci_using_dac = 1; + } else { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + dev_err(&pdev->dev, "No usable DMA " + "configuration, aborting\n"); + goto err_dma; + } + } + } + + err = pci_request_regions(pdev, igb_driver_name); + if (err) + goto err_pci_reg; + + pci_set_master(pdev); + + err = -ENOMEM; + netdev = alloc_etherdev(sizeof(struct igb_adapter)); + if (!netdev) + goto err_alloc_etherdev; + + SET_NETDEV_DEV(netdev, &pdev->dev); + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + hw = &adapter->hw; + hw->back = adapter; + adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE; + + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + + err = -EIO; + adapter->hw.hw_addr = ioremap(mmio_start, mmio_len); + if (!adapter->hw.hw_addr) + goto err_ioremap; + + netdev->open = &igb_open; + netdev->stop = &igb_close; + netdev->get_stats = &igb_get_stats; + netdev->set_multicast_list = &igb_set_multi; + netdev->set_mac_address = &igb_set_mac; + netdev->change_mtu = &igb_change_mtu; + netdev->do_ioctl = &igb_ioctl; + igb_set_ethtool_ops(netdev); + netdev->tx_timeout = &igb_tx_timeout; + netdev->watchdog_timeo = 5 * HZ; + netif_napi_add(netdev, &adapter->napi, igb_clean, 64); + netdev->vlan_rx_register = igb_vlan_rx_register; + netdev->vlan_rx_add_vid = igb_vlan_rx_add_vid; + netdev->vlan_rx_kill_vid = igb_vlan_rx_kill_vid; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = igb_netpoll; +#endif + netdev->hard_start_xmit = &igb_xmit_frame_adv; + + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + + netdev->mem_start = mmio_start; + netdev->mem_end = mmio_start + mmio_len; + + adapter->bd_number = cards_found; + + /* PCI config space info */ + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->revision_id = pdev->revision; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_device_id = pdev->subsystem_device; + + /* setup the private structure */ + hw->back = adapter; + /* Copy the default MAC, PHY and NVM function pointers */ + memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops)); + memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops)); + memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops)); + /* Initialize skew-specific constants */ + err = ei->get_invariants(hw); + if (err) + goto err_hw_init; + + err = igb_sw_init(adapter); + if (err) + goto err_sw_init; + + igb_get_bus_info_pcie(hw); + + hw->phy.autoneg_wait_to_complete = false; + hw->mac.adaptive_ifs = true; + + /* Copper options */ + if (hw->phy.media_type == e1000_media_type_copper) { + hw->phy.mdix = AUTO_ALL_MODES; + hw->phy.disable_polarity_correction = false; + hw->phy.ms_type = e1000_ms_hw_default; + } + + if (igb_check_reset_block(hw)) + dev_info(&pdev->dev, + "PHY reset is blocked due to SOL/IDER session.\n"); + + netdev->features = NETIF_F_SG | + NETIF_F_HW_CSUM | + NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER; + + netdev->features |= NETIF_F_TSO; + + netdev->features |= NETIF_F_TSO6; + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + + netdev->features |= NETIF_F_LLTX; + adapter->en_mng_pt = igb_enable_mng_pass_thru(&adapter->hw); + + /* before reading the NVM, reset the controller to put the device in a + * known good starting state */ + hw->mac.ops.reset_hw(hw); + + /* make sure the NVM is good */ + if (igb_validate_nvm_checksum(hw) < 0) { + dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n"); + err = -EIO; + goto err_eeprom; + } + + /* copy the MAC address out of the NVM */ + if (hw->mac.ops.read_mac_addr(hw)) + dev_err(&pdev->dev, "NVM Read Error\n"); + + memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); + memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); + + if (!is_valid_ether_addr(netdev->perm_addr)) { + dev_err(&pdev->dev, "Invalid MAC Address\n"); + err = -EIO; + goto err_eeprom; + } + + init_timer(&adapter->watchdog_timer); + adapter->watchdog_timer.function = &igb_watchdog; + adapter->watchdog_timer.data = (unsigned long) adapter; + + init_timer(&adapter->phy_info_timer); + adapter->phy_info_timer.function = &igb_update_phy_info; + adapter->phy_info_timer.data = (unsigned long) adapter; + + INIT_WORK(&adapter->reset_task, igb_reset_task); + INIT_WORK(&adapter->watchdog_task, igb_watchdog_task); + + /* Initialize link & ring properties that are user-changeable */ + adapter->tx_ring->count = 256; + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].count = adapter->tx_ring->count; + adapter->rx_ring->count = 256; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].count = adapter->rx_ring->count; + + adapter->fc_autoneg = true; + hw->mac.autoneg = true; + hw->phy.autoneg_advertised = 0x2f; + + hw->fc.original_type = e1000_fc_default; + hw->fc.type = e1000_fc_default; + + adapter->itr_setting = 3; + adapter->itr = IGB_START_ITR; + + igb_validate_mdi_setting(hw); + + adapter->rx_csum = 1; + + /* Initial Wake on LAN setting If APM wake is enabled in the EEPROM, + * enable the ACPI Magic Packet filter + */ + + if (hw->bus.func == 0 || + hw->device_id == E1000_DEV_ID_82575EB_COPPER) + hw->nvm.ops.read_nvm(hw, NVM_INIT_CONTROL3_PORT_A, 1, + &eeprom_data); + + if (eeprom_data & eeprom_apme_mask) + adapter->eeprom_wol |= E1000_WUFC_MAG; + + /* now that we have the eeprom settings, apply the special cases where + * the eeprom may be wrong or the board simply won't support wake on + * lan on a particular port */ + switch (pdev->device) { + case E1000_DEV_ID_82575GB_QUAD_COPPER: + adapter->eeprom_wol = 0; + break; + case E1000_DEV_ID_82575EB_FIBER_SERDES: + /* Wake events only supported on port A for dual fiber + * regardless of eeprom setting */ + if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) + adapter->eeprom_wol = 0; + break; + } + + /* initialize the wol settings based on the eeprom settings */ + adapter->wol = adapter->eeprom_wol; + + /* reset the hardware with the new settings */ + igb_reset(adapter); + + /* let the f/w know that the h/w is now under the control of the + * driver. */ + igb_get_hw_control(adapter); + + /* tell the stack to leave us alone until igb_open() is called */ + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + strcpy(netdev->name, "eth%d"); + err = register_netdev(netdev); + if (err) + goto err_register; + + dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n"); + /* print bus type/speed/width info */ + dev_info(&pdev->dev, + "%s: (PCIe:%s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n", + netdev->name, + ((hw->bus.speed == e1000_bus_speed_2500) + ? "2.5Gb/s" : "unknown"), + ((hw->bus.width == e1000_bus_width_pcie_x4) + ? "Width x4" : (hw->bus.width == e1000_bus_width_pcie_x1) + ? "Width x1" : "unknown"), + netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2], + netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]); + + igb_read_part_num(hw, &part_num); + dev_info(&pdev->dev, "%s: PBA No: %06x-%03x\n", netdev->name, + (part_num >> 8), (part_num & 0xff)); + + dev_info(&pdev->dev, + "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n", + adapter->msix_entries ? "MSI-X" : + adapter->msi_enabled ? "MSI" : "legacy", + adapter->num_rx_queues, adapter->num_tx_queues); + + cards_found++; + return 0; + +err_register: + igb_release_hw_control(adapter); +err_eeprom: + if (!igb_check_reset_block(hw)) + hw->phy.ops.reset_phy(hw); + + if (hw->flash_address) + iounmap(hw->flash_address); + + igb_remove_device(hw); + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); +err_sw_init: +err_hw_init: + iounmap(hw->hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} + +/** + * igb_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * igb_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void __devexit igb_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + + /* flush_scheduled work may reschedule our watchdog task, so + * explicitly disable watchdog tasks from being rescheduled */ + set_bit(__IGB_DOWN, &adapter->state); + del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->phy_info_timer); + + flush_scheduled_work(); + + + igb_release_manageability(adapter); + + /* Release control of h/w to f/w. If f/w is AMT enabled, this + * would have already happened in close and is redundant. */ + igb_release_hw_control(adapter); + + unregister_netdev(netdev); + + if (!igb_check_reset_block(&adapter->hw)) + adapter->hw.phy.ops.reset_phy(&adapter->hw); + + igb_remove_device(&adapter->hw); + igb_reset_interrupt_capability(adapter); + + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); + + iounmap(adapter->hw.hw_addr); + if (adapter->hw.flash_address) + iounmap(adapter->hw.flash_address); + pci_release_regions(pdev); + + free_netdev(netdev); + + pci_disable_device(pdev); +} + +/** + * igb_sw_init - Initialize general software structures (struct igb_adapter) + * @adapter: board private structure to initialize + * + * igb_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ +static int __devinit igb_sw_init(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + + pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); + + adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE; + adapter->rx_ps_hdr_size = 0; /* disable packet split */ + adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + + /* Number of supported queues. */ + /* Having more queues than CPUs doesn't make sense. */ + adapter->num_tx_queues = 1; + adapter->num_rx_queues = min(IGB_MAX_RX_QUEUES, num_online_cpus()); + + igb_set_interrupt_capability(adapter); + + if (igb_alloc_queues(adapter)) { + dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + + /* Explicitly disable IRQ since the NIC can be in any state. */ + igb_irq_disable(adapter); + + set_bit(__IGB_DOWN, &adapter->state); + return 0; +} + +/** + * igb_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ +static int igb_open(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int err; + int i; + + /* disallow open during test */ + if (test_bit(__IGB_TESTING, &adapter->state)) + return -EBUSY; + + /* allocate transmit descriptors */ + err = igb_setup_all_tx_resources(adapter); + if (err) + goto err_setup_tx; + + /* allocate receive descriptors */ + err = igb_setup_all_rx_resources(adapter); + if (err) + goto err_setup_rx; + + /* e1000_power_up_phy(adapter); */ + + adapter->mng_vlan_id = IGB_MNG_VLAN_NONE; + if ((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN)) + igb_update_mng_vlan(adapter); + + /* before we allocate an interrupt, we must be ready to handle it. + * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt + * as soon as we call pci_request_irq, so we have to setup our + * clean_rx handler before we do so. */ + igb_configure(adapter); + + err = igb_request_irq(adapter); + if (err) + goto err_req_irq; + + /* From here on the code is the same as igb_up() */ + clear_bit(__IGB_DOWN, &adapter->state); + + napi_enable(&adapter->napi); + if (adapter->msix_entries) + for (i = 0; i < adapter->num_rx_queues; i++) + napi_enable(&adapter->rx_ring[i].napi); + + igb_irq_enable(adapter); + + /* Clear any pending interrupts. */ + rd32(E1000_ICR); + /* Fire a link status change interrupt to start the watchdog. */ + wr32(E1000_ICS, E1000_ICS_LSC); + + return 0; + +err_req_irq: + igb_release_hw_control(adapter); + /* e1000_power_down_phy(adapter); */ + igb_free_all_rx_resources(adapter); +err_setup_rx: + igb_free_all_tx_resources(adapter); +err_setup_tx: + igb_reset(adapter); + + return err; +} + +/** + * igb_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the driver's control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int igb_close(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + WARN_ON(test_bit(__IGB_RESETTING, &adapter->state)); + igb_down(adapter); + + igb_free_irq(adapter); + + igb_free_all_tx_resources(adapter); + igb_free_all_rx_resources(adapter); + + /* kill manageability vlan ID if supported, but not if a vlan with + * the same ID is registered on the host OS (let 8021q kill it) */ + if ((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && + !(adapter->vlgrp && + vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) + igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + + return 0; +} + +/** + * igb_setup_tx_resources - allocate Tx resources (Descriptors) + * @adapter: board private structure + * @tx_ring: tx descriptor ring (for a specific queue) to setup + * + * Return 0 on success, negative on failure + **/ + +int igb_setup_tx_resources(struct igb_adapter *adapter, + struct igb_ring *tx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + int size; + + size = sizeof(struct igb_buffer) * tx_ring->count; + tx_ring->buffer_info = vmalloc(size); + if (!tx_ring->buffer_info) + goto err; + memset(tx_ring->buffer_info, 0, size); + + /* round up to nearest 4K */ + tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc) + + sizeof(u32); + tx_ring->size = ALIGN(tx_ring->size, 4096); + + tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size, + &tx_ring->dma); + + if (!tx_ring->desc) + goto err; + + tx_ring->adapter = adapter; + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + spin_lock_init(&tx_ring->tx_clean_lock); + spin_lock_init(&tx_ring->tx_lock); + return 0; + +err: + vfree(tx_ring->buffer_info); + dev_err(&adapter->pdev->dev, + "Unable to allocate memory for the transmit descriptor ring\n"); + return -ENOMEM; +} + +/** + * igb_setup_all_tx_resources - wrapper to allocate Tx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * Return 0 on success, negative on failure + **/ +static int igb_setup_all_tx_resources(struct igb_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_tx_queues; i++) { + err = igb_setup_tx_resources(adapter, &adapter->tx_ring[i]); + if (err) { + dev_err(&adapter->pdev->dev, + "Allocation for Tx Queue %u failed\n", i); + for (i--; i >= 0; i--) + igb_free_tx_resources(adapter, + &adapter->tx_ring[i]); + break; + } + } + + return err; +} + +/** + * igb_configure_tx - Configure transmit Unit after Reset + * @adapter: board private structure + * + * Configure the Tx unit of the MAC after a reset. + **/ +static void igb_configure_tx(struct igb_adapter *adapter) +{ + u64 tdba, tdwba; + struct e1000_hw *hw = &adapter->hw; + u32 tctl; + u32 txdctl, txctrl; + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) { + struct igb_ring *ring = &(adapter->tx_ring[i]); + + wr32(E1000_TDLEN(i), + ring->count * sizeof(struct e1000_tx_desc)); + tdba = ring->dma; + wr32(E1000_TDBAL(i), + tdba & 0x00000000ffffffffULL); + wr32(E1000_TDBAH(i), tdba >> 32); + + tdwba = ring->dma + ring->count * sizeof(struct e1000_tx_desc); + tdwba |= 1; /* enable head wb */ + wr32(E1000_TDWBAL(i), + tdwba & 0x00000000ffffffffULL); + wr32(E1000_TDWBAH(i), tdwba >> 32); + + ring->head = E1000_TDH(i); + ring->tail = E1000_TDT(i); + writel(0, hw->hw_addr + ring->tail); + writel(0, hw->hw_addr + ring->head); + txdctl = rd32(E1000_TXDCTL(i)); + txdctl |= E1000_TXDCTL_QUEUE_ENABLE; + wr32(E1000_TXDCTL(i), txdctl); + + /* Turn off Relaxed Ordering on head write-backs. The + * writebacks MUST be delivered in order or it will + * completely screw up our bookeeping. + */ + txctrl = rd32(E1000_DCA_TXCTRL(i)); + txctrl &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN; + wr32(E1000_DCA_TXCTRL(i), txctrl); + } + + + + /* Use the default values for the Tx Inter Packet Gap (IPG) timer */ + + /* Program the Transmit Control Register */ + + tctl = rd32(E1000_TCTL); + tctl &= ~E1000_TCTL_CT; + tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | + (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); + + igb_config_collision_dist(hw); + + /* Setup Transmit Descriptor Settings for eop descriptor */ + adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_RS; + + /* Enable transmits */ + tctl |= E1000_TCTL_EN; + + wr32(E1000_TCTL, tctl); +} + +/** + * igb_setup_rx_resources - allocate Rx resources (Descriptors) + * @adapter: board private structure + * @rx_ring: rx descriptor ring (for a specific queue) to setup + * + * Returns 0 on success, negative on failure + **/ + +int igb_setup_rx_resources(struct igb_adapter *adapter, + struct igb_ring *rx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + int size, desc_len; + + size = sizeof(struct igb_buffer) * rx_ring->count; + rx_ring->buffer_info = vmalloc(size); + if (!rx_ring->buffer_info) + goto err; + memset(rx_ring->buffer_info, 0, size); + + desc_len = sizeof(union e1000_adv_rx_desc); + + /* Round up to nearest 4K */ + rx_ring->size = rx_ring->count * desc_len; + rx_ring->size = ALIGN(rx_ring->size, 4096); + + rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size, + &rx_ring->dma); + + if (!rx_ring->desc) + goto err; + + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + rx_ring->pending_skb = NULL; + + rx_ring->adapter = adapter; + /* FIXME: do we want to setup ring->napi->poll here? */ + rx_ring->napi.poll = adapter->napi.poll; + + return 0; + +err: + vfree(rx_ring->buffer_info); + dev_err(&adapter->pdev->dev, "Unable to allocate memory for " + "the receive descriptor ring\n"); + return -ENOMEM; +} + +/** + * igb_setup_all_rx_resources - wrapper to allocate Rx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * Return 0 on success, negative on failure + **/ +static int igb_setup_all_rx_resources(struct igb_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_rx_queues; i++) { + err = igb_setup_rx_resources(adapter, &adapter->rx_ring[i]); + if (err) { + dev_err(&adapter->pdev->dev, + "Allocation for Rx Queue %u failed\n", i); + for (i--; i >= 0; i--) + igb_free_rx_resources(adapter, + &adapter->rx_ring[i]); + break; + } + } + + return err; +} + +/** + * igb_setup_rctl - configure the receive control registers + * @adapter: Board private structure + **/ +static void igb_setup_rctl(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + u32 srrctl = 0; + int i; + + rctl = rd32(E1000_RCTL); + + rctl &= ~(3 << E1000_RCTL_MO_SHIFT); + + rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | + E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | + (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); + + /* disable the stripping of CRC because it breaks + * BMC firmware connected over SMBUS + rctl |= E1000_RCTL_SECRC; + */ + + rctl &= ~E1000_RCTL_SBP; + + if (adapter->netdev->mtu <= ETH_DATA_LEN) + rctl &= ~E1000_RCTL_LPE; + else + rctl |= E1000_RCTL_LPE; + if (adapter->rx_buffer_len <= IGB_RXBUFFER_2048) { + /* Setup buffer sizes */ + rctl &= ~E1000_RCTL_SZ_4096; + rctl |= E1000_RCTL_BSEX; + switch (adapter->rx_buffer_len) { + case IGB_RXBUFFER_256: + rctl |= E1000_RCTL_SZ_256; + rctl &= ~E1000_RCTL_BSEX; + break; + case IGB_RXBUFFER_512: + rctl |= E1000_RCTL_SZ_512; + rctl &= ~E1000_RCTL_BSEX; + break; + case IGB_RXBUFFER_1024: + rctl |= E1000_RCTL_SZ_1024; + rctl &= ~E1000_RCTL_BSEX; + break; + case IGB_RXBUFFER_2048: + default: + rctl |= E1000_RCTL_SZ_2048; + rctl &= ~E1000_RCTL_BSEX; + break; + case IGB_RXBUFFER_4096: + rctl |= E1000_RCTL_SZ_4096; + break; + case IGB_RXBUFFER_8192: + rctl |= E1000_RCTL_SZ_8192; + break; + case IGB_RXBUFFER_16384: + rctl |= E1000_RCTL_SZ_16384; + break; + } + } else { + rctl &= ~E1000_RCTL_BSEX; + srrctl = adapter->rx_buffer_len >> E1000_SRRCTL_BSIZEPKT_SHIFT; + } + + /* 82575 and greater support packet-split where the protocol + * header is placed in skb->data and the packet data is + * placed in pages hanging off of skb_shinfo(skb)->nr_frags. + * In the case of a non-split, skb->data is linearly filled, + * followed by the page buffers. Therefore, skb->data is + * sized to hold the largest protocol header. + */ + /* allocations using alloc_page take too long for regular MTU + * so only enable packet split for jumbo frames */ + if (rctl & E1000_RCTL_LPE) { + adapter->rx_ps_hdr_size = IGB_RXBUFFER_128; + srrctl = adapter->rx_ps_hdr_size << + E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; + /* buffer size is ALWAYS one page */ + srrctl |= PAGE_SIZE >> E1000_SRRCTL_BSIZEPKT_SHIFT; + srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; + } else { + adapter->rx_ps_hdr_size = 0; + srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF; + } + + for (i = 0; i < adapter->num_rx_queues; i++) + wr32(E1000_SRRCTL(i), srrctl); + + wr32(E1000_RCTL, rctl); +} + +/** + * igb_configure_rx - Configure receive Unit after Reset + * @adapter: board private structure + * + * Configure the Rx unit of the MAC after a reset. + **/ +static void igb_configure_rx(struct igb_adapter *adapter) +{ + u64 rdba; + struct e1000_hw *hw = &adapter->hw; + u32 rctl, rxcsum; + u32 rxdctl; + int i; + + /* disable receives while setting up the descriptors */ + rctl = rd32(E1000_RCTL); + wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN); + wrfl(); + mdelay(10); + + if (adapter->itr_setting > 3) + wr32(E1000_ITR, + 1000000000 / (adapter->itr * 256)); + + /* Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring */ + for (i = 0; i < adapter->num_rx_queues; i++) { + struct igb_ring *ring = &(adapter->rx_ring[i]); + rdba = ring->dma; + wr32(E1000_RDBAL(i), + rdba & 0x00000000ffffffffULL); + wr32(E1000_RDBAH(i), rdba >> 32); + wr32(E1000_RDLEN(i), + ring->count * sizeof(union e1000_adv_rx_desc)); + + ring->head = E1000_RDH(i); + ring->tail = E1000_RDT(i); + writel(0, hw->hw_addr + ring->tail); + writel(0, hw->hw_addr + ring->head); + + rxdctl = rd32(E1000_RXDCTL(i)); + rxdctl |= E1000_RXDCTL_QUEUE_ENABLE; + rxdctl &= 0xFFF00000; + rxdctl |= IGB_RX_PTHRESH; + rxdctl |= IGB_RX_HTHRESH << 8; + rxdctl |= IGB_RX_WTHRESH << 16; + wr32(E1000_RXDCTL(i), rxdctl); + } + + if (adapter->num_rx_queues > 1) { + u32 random[10]; + u32 mrqc; + u32 j, shift; + union e1000_reta { + u32 dword; + u8 bytes[4]; + } reta; + + get_random_bytes(&random[0], 40); + + shift = 6; + for (j = 0; j < (32 * 4); j++) { + reta.bytes[j & 3] = + (j % adapter->num_rx_queues) << shift; + if ((j & 3) == 3) + writel(reta.dword, + hw->hw_addr + E1000_RETA(0) + (j & ~3)); + } + mrqc = E1000_MRQC_ENABLE_RSS_4Q; + + /* Fill out hash function seeds */ + for (j = 0; j < 10; j++) + array_wr32(E1000_RSSRK(0), j, random[j]); + + mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 | + E1000_MRQC_RSS_FIELD_IPV4_TCP); + mrqc |= (E1000_MRQC_RSS_FIELD_IPV6 | + E1000_MRQC_RSS_FIELD_IPV6_TCP); + mrqc |= (E1000_MRQC_RSS_FIELD_IPV4_UDP | + E1000_MRQC_RSS_FIELD_IPV6_UDP); + mrqc |= (E1000_MRQC_RSS_FIELD_IPV6_UDP_EX | + E1000_MRQC_RSS_FIELD_IPV6_TCP_EX); + + + wr32(E1000_MRQC, mrqc); + + /* Multiqueue and raw packet checksumming are mutually + * exclusive. Note that this not the same as TCP/IP + * checksumming, which works fine. */ + rxcsum = rd32(E1000_RXCSUM); + rxcsum |= E1000_RXCSUM_PCSD; + wr32(E1000_RXCSUM, rxcsum); + } else { + /* Enable Receive Checksum Offload for TCP and UDP */ + rxcsum = rd32(E1000_RXCSUM); + if (adapter->rx_csum) { + rxcsum |= E1000_RXCSUM_TUOFL; + + /* Enable IPv4 payload checksum for UDP fragments + * Must be used in conjunction with packet-split. */ + if (adapter->rx_ps_hdr_size) + rxcsum |= E1000_RXCSUM_IPPCSE; + } else { + rxcsum &= ~E1000_RXCSUM_TUOFL; + /* don't need to clear IPPCSE as it defaults to 0 */ + } + wr32(E1000_RXCSUM, rxcsum); + } + + if (adapter->vlgrp) + wr32(E1000_RLPML, + adapter->max_frame_size + VLAN_TAG_SIZE); + else + wr32(E1000_RLPML, adapter->max_frame_size); + + /* Enable Receives */ + wr32(E1000_RCTL, rctl); +} + +/** + * igb_free_tx_resources - Free Tx Resources per Queue + * @adapter: board private structure + * @tx_ring: Tx descriptor ring for a specific queue + * + * Free all transmit software resources + **/ +static void igb_free_tx_resources(struct igb_adapter *adapter, + struct igb_ring *tx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + + igb_clean_tx_ring(adapter, tx_ring); + + vfree(tx_ring->buffer_info); + tx_ring->buffer_info = NULL; + + pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma); + + tx_ring->desc = NULL; +} + +/** + * igb_free_all_tx_resources - Free Tx Resources for All Queues + * @adapter: board private structure + * + * Free all transmit software resources + **/ +static void igb_free_all_tx_resources(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + igb_free_tx_resources(adapter, &adapter->tx_ring[i]); +} + +static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter, + struct igb_buffer *buffer_info) +{ + if (buffer_info->dma) { + pci_unmap_page(adapter->pdev, + buffer_info->dma, + buffer_info->length, + PCI_DMA_TODEVICE); + buffer_info->dma = 0; + } + if (buffer_info->skb) { + dev_kfree_skb_any(buffer_info->skb); + buffer_info->skb = NULL; + } + buffer_info->time_stamp = 0; + /* buffer_info must be completely set up in the transmit path */ +} + +/** + * igb_clean_tx_ring - Free Tx Buffers + * @adapter: board private structure + * @tx_ring: ring to be cleaned + **/ +static void igb_clean_tx_ring(struct igb_adapter *adapter, + struct igb_ring *tx_ring) +{ + struct igb_buffer *buffer_info; + unsigned long size; + unsigned int i; + + if (!tx_ring->buffer_info) + return; + /* Free all the Tx ring sk_buffs */ + + for (i = 0; i < tx_ring->count; i++) { + buffer_info = &tx_ring->buffer_info[i]; + igb_unmap_and_free_tx_resource(adapter, buffer_info); + } + + size = sizeof(struct igb_buffer) * tx_ring->count; + memset(tx_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + + memset(tx_ring->desc, 0, tx_ring->size); + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + + writel(0, adapter->hw.hw_addr + tx_ring->head); + writel(0, adapter->hw.hw_addr + tx_ring->tail); +} + +/** + * igb_clean_all_tx_rings - Free Tx Buffers for all queues + * @adapter: board private structure + **/ +static void igb_clean_all_tx_rings(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + igb_clean_tx_ring(adapter, &adapter->tx_ring[i]); +} + +/** + * igb_free_rx_resources - Free Rx Resources + * @adapter: board private structure + * @rx_ring: ring to clean the resources from + * + * Free all receive software resources + **/ +static void igb_free_rx_resources(struct igb_adapter *adapter, + struct igb_ring *rx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + + igb_clean_rx_ring(adapter, rx_ring); + + vfree(rx_ring->buffer_info); + rx_ring->buffer_info = NULL; + + pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma); + + rx_ring->desc = NULL; +} + +/** + * igb_free_all_rx_resources - Free Rx Resources for All Queues + * @adapter: board private structure + * + * Free all receive software resources + **/ +static void igb_free_all_rx_resources(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + igb_free_rx_resources(adapter, &adapter->rx_ring[i]); +} + +/** + * igb_clean_rx_ring - Free Rx Buffers per Queue + * @adapter: board private structure + * @rx_ring: ring to free buffers from + **/ +static void igb_clean_rx_ring(struct igb_adapter *adapter, + struct igb_ring *rx_ring) +{ + struct igb_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; + + if (!rx_ring->buffer_info) + return; + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rx_ring->count; i++) { + buffer_info = &rx_ring->buffer_info[i]; + if (buffer_info->dma) { + if (adapter->rx_ps_hdr_size) + pci_unmap_single(pdev, buffer_info->dma, + adapter->rx_ps_hdr_size, + PCI_DMA_FROMDEVICE); + else + pci_unmap_single(pdev, buffer_info->dma, + adapter->rx_buffer_len, + PCI_DMA_FROMDEVICE); + buffer_info->dma = 0; + } + + if (buffer_info->skb) { + dev_kfree_skb(buffer_info->skb); + buffer_info->skb = NULL; + } + if (buffer_info->page) { + pci_unmap_page(pdev, buffer_info->page_dma, + PAGE_SIZE, PCI_DMA_FROMDEVICE); + put_page(buffer_info->page); + buffer_info->page = NULL; + buffer_info->page_dma = 0; + } + } + + /* there also may be some cached data from a chained receive */ + if (rx_ring->pending_skb) { + dev_kfree_skb(rx_ring->pending_skb); + rx_ring->pending_skb = NULL; + } + + size = sizeof(struct igb_buffer) * rx_ring->count; + memset(rx_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(rx_ring->desc, 0, rx_ring->size); + + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + + writel(0, adapter->hw.hw_addr + rx_ring->head); + writel(0, adapter->hw.hw_addr + rx_ring->tail); +} + +/** + * igb_clean_all_rx_rings - Free Rx Buffers for all queues + * @adapter: board private structure + **/ +static void igb_clean_all_rx_rings(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + igb_clean_rx_ring(adapter, &adapter->rx_ring[i]); +} + +/** + * igb_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int igb_set_mac(struct net_device *netdev, void *p) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len); + + adapter->hw.mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, 0); + + return 0; +} + +/** + * igb_set_multi - Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_multi entry point is called whenever the multicast address + * list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper multicast, + * promiscuous mode, and all-multi behavior. + **/ +static void igb_set_multi(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct e1000_mac_info *mac = &hw->mac; + struct dev_mc_list *mc_ptr; + u8 *mta_list; + u32 rctl; + int i; + + /* Check for Promiscuous and All Multicast modes */ + + rctl = rd32(E1000_RCTL); + + if (netdev->flags & IFF_PROMISC) + rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); + else if (netdev->flags & IFF_ALLMULTI) { + rctl |= E1000_RCTL_MPE; + rctl &= ~E1000_RCTL_UPE; + } else + rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); + + wr32(E1000_RCTL, rctl); + + if (!netdev->mc_count) { + /* nothing to program, so clear mc list */ + igb_update_mc_addr_list(hw, NULL, 0, 1, + mac->rar_entry_count); + return; + } + + mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC); + if (!mta_list) + return; + + /* The shared function expects a packed array of only addresses. */ + mc_ptr = netdev->mc_list; + + for (i = 0; i < netdev->mc_count; i++) { + if (!mc_ptr) + break; + memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN); + mc_ptr = mc_ptr->next; + } + igb_update_mc_addr_list(hw, mta_list, i, 1, mac->rar_entry_count); + kfree(mta_list); +} + +/* Need to wait a few seconds after link up to get diagnostic information from + * the phy */ +static void igb_update_phy_info(unsigned long data) +{ + struct igb_adapter *adapter = (struct igb_adapter *) data; + adapter->hw.phy.ops.get_phy_info(&adapter->hw); +} + +/** + * igb_watchdog - Timer Call-back + * @data: pointer to adapter cast into an unsigned long + **/ +static void igb_watchdog(unsigned long data) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + /* Do the rest outside of interrupt context */ + schedule_work(&adapter->watchdog_task); +} + +static void igb_watchdog_task(struct work_struct *work) +{ + struct igb_adapter *adapter = container_of(work, + struct igb_adapter, watchdog_task); + struct e1000_hw *hw = &adapter->hw; + + struct net_device *netdev = adapter->netdev; + struct igb_ring *tx_ring = adapter->tx_ring; + struct e1000_mac_info *mac = &adapter->hw.mac; + u32 link; + s32 ret_val; + + if ((netif_carrier_ok(netdev)) && + (rd32(E1000_STATUS) & E1000_STATUS_LU)) + goto link_up; + + ret_val = hw->mac.ops.check_for_link(&adapter->hw); + if ((ret_val == E1000_ERR_PHY) && + (hw->phy.type == e1000_phy_igp_3) && + (rd32(E1000_CTRL) & + E1000_PHY_CTRL_GBE_DISABLE)) + dev_info(&adapter->pdev->dev, + "Gigabit has been disabled, downgrading speed\n"); + + if ((hw->phy.media_type == e1000_media_type_internal_serdes) && + !(rd32(E1000_TXCW) & E1000_TXCW_ANE)) + link = mac->serdes_has_link; + else + link = rd32(E1000_STATUS) & + E1000_STATUS_LU; + + if (link) { + if (!netif_carrier_ok(netdev)) { + u32 ctrl; + hw->mac.ops.get_speed_and_duplex(&adapter->hw, + &adapter->link_speed, + &adapter->link_duplex); + + ctrl = rd32(E1000_CTRL); + dev_info(&adapter->pdev->dev, + "NIC Link is Up %d Mbps %s, " + "Flow Control: %s\n", + adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "Full Duplex" : "Half Duplex", + ((ctrl & E1000_CTRL_TFCE) && (ctrl & + E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl & + E1000_CTRL_RFCE) ? "RX" : ((ctrl & + E1000_CTRL_TFCE) ? "TX" : "None"))); + + /* tweak tx_queue_len according to speed/duplex and + * adjust the timeout factor */ + netdev->tx_queue_len = adapter->tx_queue_len; + adapter->tx_timeout_factor = 1; + switch (adapter->link_speed) { + case SPEED_10: + netdev->tx_queue_len = 10; + adapter->tx_timeout_factor = 14; + break; + case SPEED_100: + netdev->tx_queue_len = 100; + /* maybe add some timeout factor ? */ + break; + } + + netif_carrier_on(netdev); + netif_wake_queue(netdev); + + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); + } + } else { + if (netif_carrier_ok(netdev)) { + adapter->link_speed = 0; + adapter->link_duplex = 0; + dev_info(&adapter->pdev->dev, "NIC Link is Down\n"); + netif_carrier_off(netdev); + netif_stop_queue(netdev); + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); + } + } + +link_up: + igb_update_stats(adapter); + + mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old; + adapter->tpt_old = adapter->stats.tpt; + mac->collision_delta = adapter->stats.colc - adapter->colc_old; + adapter->colc_old = adapter->stats.colc; + + adapter->gorc = adapter->stats.gorc - adapter->gorc_old; + adapter->gorc_old = adapter->stats.gorc; + adapter->gotc = adapter->stats.gotc - adapter->gotc_old; + adapter->gotc_old = adapter->stats.gotc; + + igb_update_adaptive(&adapter->hw); + + if (!netif_carrier_ok(netdev)) { + if (IGB_DESC_UNUSED(tx_ring) + 1 < tx_ring->count) { + /* We've lost link, so the controller stops DMA, + * but we've got queued Tx work that's never going + * to get done, so reset controller to flush Tx. + * (Do the reset outside of interrupt context). */ + adapter->tx_timeout_count++; + schedule_work(&adapter->reset_task); + } + } + + /* Cause software interrupt to ensure rx ring is cleaned */ + wr32(E1000_ICS, E1000_ICS_RXDMT0); + + /* Force detection of hung controller every watchdog period */ + tx_ring->detect_tx_hung = true; + + /* Reset the timer */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + 2 * HZ)); +} + +enum latency_range { + lowest_latency = 0, + low_latency = 1, + bulk_latency = 2, + latency_invalid = 255 +}; + + +static void igb_lower_rx_eitr(struct igb_adapter *adapter, + struct igb_ring *rx_ring) +{ + struct e1000_hw *hw = &adapter->hw; + int new_val; + + new_val = rx_ring->itr_val / 2; + if (new_val < IGB_MIN_DYN_ITR) + new_val = IGB_MIN_DYN_ITR; + + if (new_val != rx_ring->itr_val) { + rx_ring->itr_val = new_val; + wr32(rx_ring->itr_register, + 1000000000 / (new_val * 256)); + } +} + +static void igb_raise_rx_eitr(struct igb_adapter *adapter, + struct igb_ring *rx_ring) +{ + struct e1000_hw *hw = &adapter->hw; + int new_val; + + new_val = rx_ring->itr_val * 2; + if (new_val > IGB_MAX_DYN_ITR) + new_val = IGB_MAX_DYN_ITR; + + if (new_val != rx_ring->itr_val) { + rx_ring->itr_val = new_val; + wr32(rx_ring->itr_register, + 1000000000 / (new_val * 256)); + } +} + +/** + * igb_update_itr - update the dynamic ITR value based on statistics + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. + * this functionality is controlled by the InterruptThrottleRate module + * parameter (see igb_param.c) + * NOTE: These calculations are only valid when operating in a single- + * queue environment. + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + **/ +static unsigned int igb_update_itr(struct igb_adapter *adapter, u16 itr_setting, + int packets, int bytes) +{ + unsigned int retval = itr_setting; + + if (packets == 0) + goto update_itr_done; + + switch (itr_setting) { + case lowest_latency: + /* handle TSO and jumbo frames */ + if (bytes/packets > 8000) + retval = bulk_latency; + else if ((packets < 5) && (bytes > 512)) + retval = low_latency; + break; + case low_latency: /* 50 usec aka 20000 ints/s */ + if (bytes > 10000) { + /* this if handles the TSO accounting */ + if (bytes/packets > 8000) { + retval = bulk_latency; + } else if ((packets < 10) || ((bytes/packets) > 1200)) { + retval = bulk_latency; + } else if ((packets > 35)) { + retval = lowest_latency; + } + } else if (bytes/packets > 2000) { + retval = bulk_latency; + } else if (packets <= 2 && bytes < 512) { + retval = lowest_latency; + } + break; + case bulk_latency: /* 250 usec aka 4000 ints/s */ + if (bytes > 25000) { + if (packets > 35) + retval = low_latency; + } else if (bytes < 6000) { + retval = low_latency; + } + break; + } + +update_itr_done: + return retval; +} + +static void igb_set_itr(struct igb_adapter *adapter, u16 itr_register, + int rx_only) +{ + u16 current_itr; + u32 new_itr = adapter->itr; + + /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ + if (adapter->link_speed != SPEED_1000) { + current_itr = 0; + new_itr = 4000; + goto set_itr_now; + } + + adapter->rx_itr = igb_update_itr(adapter, + adapter->rx_itr, + adapter->rx_ring->total_packets, + adapter->rx_ring->total_bytes); + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) + adapter->rx_itr = low_latency; + + if (!rx_only) { + adapter->tx_itr = igb_update_itr(adapter, + adapter->tx_itr, + adapter->tx_ring->total_packets, + adapter->tx_ring->total_bytes); + /* conservative mode (itr 3) eliminates the + * lowest_latency setting */ + if (adapter->itr_setting == 3 && + adapter->tx_itr == lowest_latency) + adapter->tx_itr = low_latency; + + current_itr = max(adapter->rx_itr, adapter->tx_itr); + } else { + current_itr = adapter->rx_itr; + } + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = 70000; + break; + case low_latency: + new_itr = 20000; /* aka hwitr = ~200 */ + break; + case bulk_latency: + new_itr = 4000; + break; + default: + break; + } + +set_itr_now: + if (new_itr != adapter->itr) { + /* this attempts to bias the interrupt rate towards Bulk + * by adding intermediate steps when interrupt rate is + * increasing */ + new_itr = new_itr > adapter->itr ? + min(adapter->itr + (new_itr >> 2), new_itr) : + new_itr; + /* Don't write the value here; it resets the adapter's + * internal timer, and causes us to delay far longer than + * we should between interrupts. Instead, we write the ITR + * value at the beginning of the next interrupt so the timing + * ends up being correct. + */ + adapter->itr = new_itr; + adapter->set_itr = 1; + } + + return; +} + + +#define IGB_TX_FLAGS_CSUM 0x00000001 +#define IGB_TX_FLAGS_VLAN 0x00000002 +#define IGB_TX_FLAGS_TSO 0x00000004 +#define IGB_TX_FLAGS_IPV4 0x00000008 +#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000 +#define IGB_TX_FLAGS_VLAN_SHIFT 16 + +static inline int igb_tso_adv(struct igb_adapter *adapter, + struct igb_ring *tx_ring, + struct sk_buff *skb, u32 tx_flags, u8 *hdr_len) +{ + struct e1000_adv_tx_context_desc *context_desc; + unsigned int i; + int err; + struct igb_buffer *buffer_info; + u32 info = 0, tu_cmd = 0; + u32 mss_l4len_idx, l4len; + *hdr_len = 0; + + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (err) + return err; + } + + l4len = tcp_hdrlen(skb); + *hdr_len += l4len; + + if (skb->protocol == htons(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + iph->tot_len = 0; + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, + IPPROTO_TCP, + 0); + } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { + ipv6_hdr(skb)->payload_len = 0; + tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + } + + i = tx_ring->next_to_use; + + buffer_info = &tx_ring->buffer_info[i]; + context_desc = E1000_TX_CTXTDESC_ADV(*tx_ring, i); + /* VLAN MACLEN IPLEN */ + if (tx_flags & IGB_TX_FLAGS_VLAN) + info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK); + info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT); + *hdr_len += skb_network_offset(skb); + info |= skb_network_header_len(skb); + *hdr_len += skb_network_header_len(skb); + context_desc->vlan_macip_lens = cpu_to_le32(info); + + /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ + tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT); + + if (skb->protocol == htons(ETH_P_IP)) + tu_cmd |= E1000_ADVTXD_TUCMD_IPV4; + tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP; + + context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd); + + /* MSS L4LEN IDX */ + mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT); + mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT); + + /* Context index must be unique per ring. Luckily, so is the interrupt + * mask value. */ + mss_l4len_idx |= tx_ring->eims_value >> 4; + + context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); + context_desc->seqnum_seed = 0; + + buffer_info->time_stamp = jiffies; + buffer_info->dma = 0; + i++; + if (i == tx_ring->count) + i = 0; + + tx_ring->next_to_use = i; + + return true; +} + +static inline bool igb_tx_csum_adv(struct igb_adapter *adapter, + struct igb_ring *tx_ring, + struct sk_buff *skb, u32 tx_flags) +{ + struct e1000_adv_tx_context_desc *context_desc; + unsigned int i; + struct igb_buffer *buffer_info; + u32 info = 0, tu_cmd = 0; + + if ((skb->ip_summed == CHECKSUM_PARTIAL) || + (tx_flags & IGB_TX_FLAGS_VLAN)) { + i = tx_ring->next_to_use; + buffer_info = &tx_ring->buffer_info[i]; + context_desc = E1000_TX_CTXTDESC_ADV(*tx_ring, i); + + if (tx_flags & IGB_TX_FLAGS_VLAN) + info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK); + info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT); + if (skb->ip_summed == CHECKSUM_PARTIAL) + info |= skb_network_header_len(skb); + + context_desc->vlan_macip_lens = cpu_to_le32(info); + + tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT); + + if (skb->ip_summed == CHECKSUM_PARTIAL) { + if (skb->protocol == htons(ETH_P_IP)) + tu_cmd |= E1000_ADVTXD_TUCMD_IPV4; + if (skb->sk && (skb->sk->sk_protocol == IPPROTO_TCP)) + tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP; + } + + context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd); + context_desc->seqnum_seed = 0; + context_desc->mss_l4len_idx = + cpu_to_le32(tx_ring->eims_value >> 4); + + buffer_info->time_stamp = jiffies; + buffer_info->dma = 0; + + i++; + if (i == tx_ring->count) + i = 0; + tx_ring->next_to_use = i; + + return true; + } + + + return false; +} + +#define IGB_MAX_TXD_PWR 16 +#define IGB_MAX_DATA_PER_TXD (1<<IGB_MAX_TXD_PWR) + +static inline int igb_tx_map_adv(struct igb_adapter *adapter, + struct igb_ring *tx_ring, + struct sk_buff *skb) +{ + struct igb_buffer *buffer_info; + unsigned int len = skb_headlen(skb); + unsigned int count = 0, i; + unsigned int f; + + i = tx_ring->next_to_use; + + buffer_info = &tx_ring->buffer_info[i]; + BUG_ON(len >= IGB_MAX_DATA_PER_TXD); + buffer_info->length = len; + /* set time_stamp *before* dma to help avoid a possible race */ + buffer_info->time_stamp = jiffies; + buffer_info->dma = pci_map_single(adapter->pdev, skb->data, len, + PCI_DMA_TODEVICE); + count++; + i++; + if (i == tx_ring->count) + i = 0; + + for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) { + struct skb_frag_struct *frag; + + frag = &skb_shinfo(skb)->frags[f]; + len = frag->size; + + buffer_info = &tx_ring->buffer_info[i]; + BUG_ON(len >= IGB_MAX_DATA_PER_TXD); + buffer_info->length = len; + buffer_info->time_stamp = jiffies; + buffer_info->dma = pci_map_page(adapter->pdev, + frag->page, + frag->page_offset, + len, + PCI_DMA_TODEVICE); + + count++; + i++; + if (i == tx_ring->count) + i = 0; + } + + i = (i == 0) ? tx_ring->count - 1 : i - 1; + tx_ring->buffer_info[i].skb = skb; + + return count; +} + +static inline void igb_tx_queue_adv(struct igb_adapter *adapter, + struct igb_ring *tx_ring, + int tx_flags, int count, u32 paylen, + u8 hdr_len) +{ + union e1000_adv_tx_desc *tx_desc = NULL; + struct igb_buffer *buffer_info; + u32 olinfo_status = 0, cmd_type_len; + unsigned int i; + + cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS | + E1000_ADVTXD_DCMD_DEXT); + + if (tx_flags & IGB_TX_FLAGS_VLAN) + cmd_type_len |= E1000_ADVTXD_DCMD_VLE; + + if (tx_flags & IGB_TX_FLAGS_TSO) { + cmd_type_len |= E1000_ADVTXD_DCMD_TSE; + + /* insert tcp checksum */ + olinfo_status |= E1000_TXD_POPTS_TXSM << 8; + + /* insert ip checksum */ + if (tx_flags & IGB_TX_FLAGS_IPV4) + olinfo_status |= E1000_TXD_POPTS_IXSM << 8; + + } else if (tx_flags & IGB_TX_FLAGS_CSUM) { + olinfo_status |= E1000_TXD_POPTS_TXSM << 8; + } + + if (tx_flags & (IGB_TX_FLAGS_CSUM | IGB_TX_FLAGS_TSO | + IGB_TX_FLAGS_VLAN)) + olinfo_status |= tx_ring->eims_value >> 4; + + olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT); + + i = tx_ring->next_to_use; + while (count--) { + buffer_info = &tx_ring->buffer_info[i]; + tx_desc = E1000_TX_DESC_ADV(*tx_ring, i); + tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); + tx_desc->read.cmd_type_len = + cpu_to_le32(cmd_type_len | buffer_info->length); + tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); + i++; + if (i == tx_ring->count) + i = 0; + } + + tx_desc->read.cmd_type_len |= cpu_to_le32(adapter->txd_cmd); + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). */ + wmb(); + + tx_ring->next_to_use = i; + writel(i, adapter->hw.hw_addr + tx_ring->tail); + /* we need this if more than one processor can write to our tail + * at a time, it syncronizes IO on IA64/Altix systems */ + mmiowb(); +} + +static int __igb_maybe_stop_tx(struct net_device *netdev, + struct igb_ring *tx_ring, int size) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + netif_stop_queue(netdev); + /* Herbert's original patch had: + * smp_mb__after_netif_stop_queue(); + * but since that doesn't exist yet, just open code it. */ + smp_mb(); + + /* We need to check again in a case another CPU has just + * made room available. */ + if (IGB_DESC_UNUSED(tx_ring) < size) + return -EBUSY; + + /* A reprieve! */ + netif_start_queue(netdev); + ++adapter->restart_queue; + return 0; +} + +static int igb_maybe_stop_tx(struct net_device *netdev, + struct igb_ring *tx_ring, int size) +{ + if (IGB_DESC_UNUSED(tx_ring) >= size) + return 0; + return __igb_maybe_stop_tx(netdev, tx_ring, size); +} + +#define TXD_USE_COUNT(S) (((S) >> (IGB_MAX_TXD_PWR)) + 1) + +static int igb_xmit_frame_ring_adv(struct sk_buff *skb, + struct net_device *netdev, + struct igb_ring *tx_ring) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + unsigned int tx_flags = 0; + unsigned int len; + unsigned long irq_flags; + u8 hdr_len = 0; + int tso = 0; + + len = skb_headlen(skb); + + if (test_bit(__IGB_DOWN, &adapter->state)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (skb->len <= 0) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (!spin_trylock_irqsave(&tx_ring->tx_lock, irq_flags)) + /* Collision - tell upper layer to requeue */ + return NETDEV_TX_LOCKED; + + /* need: 1 descriptor per page, + * + 2 desc gap to keep tail from touching head, + * + 1 desc for skb->data, + * + 1 desc for context descriptor, + * otherwise try next time */ + if (igb_maybe_stop_tx(netdev, tx_ring, skb_shinfo(skb)->nr_frags + 4)) { + /* this is a hard error */ + spin_unlock_irqrestore(&tx_ring->tx_lock, irq_flags); + return NETDEV_TX_BUSY; + } + + if (adapter->vlgrp && vlan_tx_tag_present(skb)) { + tx_flags |= IGB_TX_FLAGS_VLAN; + tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT); + } + + tso = skb_is_gso(skb) ? igb_tso_adv(adapter, tx_ring, skb, tx_flags, + &hdr_len) : 0; + + if (tso < 0) { + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&tx_ring->tx_lock, irq_flags); + return NETDEV_TX_OK; + } + + if (tso) + tx_flags |= IGB_TX_FLAGS_TSO; + else if (igb_tx_csum_adv(adapter, tx_ring, skb, tx_flags)) + if (skb->ip_summed == CHECKSUM_PARTIAL) + tx_flags |= IGB_TX_FLAGS_CSUM; + + if (skb->protocol == htons(ETH_P_IP)) + tx_flags |= IGB_TX_FLAGS_IPV4; + + igb_tx_queue_adv(adapter, tx_ring, tx_flags, + igb_tx_map_adv(adapter, tx_ring, skb), + skb->len, hdr_len); + + netdev->trans_start = jiffies; + + /* Make sure there is space in the ring for the next send. */ + igb_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 4); + + spin_unlock_irqrestore(&tx_ring->tx_lock, irq_flags); + return NETDEV_TX_OK; +} + +static int igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct igb_ring *tx_ring = &adapter->tx_ring[0]; + + /* This goes back to the question of how to logically map a tx queue + * to a flow. Right now, performance is impacted slightly negatively + * if using multiple tx queues. If the stack breaks away from a + * single qdisc implementation, we can look at this again. */ + return (igb_xmit_frame_ring_adv(skb, netdev, tx_ring)); +} + +/** + * igb_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + **/ +static void igb_tx_timeout(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* Do the reset outside of interrupt context */ + adapter->tx_timeout_count++; + schedule_work(&adapter->reset_task); + wr32(E1000_EICS, adapter->eims_enable_mask & + ~(E1000_EIMS_TCP_TIMER | E1000_EIMS_OTHER)); +} + +static void igb_reset_task(struct work_struct *work) +{ + struct igb_adapter *adapter; + adapter = container_of(work, struct igb_adapter, reset_task); + + igb_reinit_locked(adapter); +} + +/** + * igb_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are actually updated from the timer callback. + **/ +static struct net_device_stats * +igb_get_stats(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + /* only return the current stats */ + return &adapter->net_stats; +} + +/** + * igb_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + **/ +static int igb_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + + if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || + (max_frame > MAX_JUMBO_FRAME_SIZE)) { + dev_err(&adapter->pdev->dev, "Invalid MTU setting\n"); + return -EINVAL; + } + +#define MAX_STD_JUMBO_FRAME_SIZE 9234 + if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { + dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n"); + return -EINVAL; + } + + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + msleep(1); + /* igb_down has a dependency on max_frame_size */ + adapter->max_frame_size = max_frame; + if (netif_running(netdev)) + igb_down(adapter); + + /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN + * means we reserve 2 more, this pushes us to allocate from the next + * larger slab size. + * i.e. RXBUFFER_2048 --> size-4096 slab + */ + + if (max_frame <= IGB_RXBUFFER_256) + adapter->rx_buffer_len = IGB_RXBUFFER_256; + else if (max_frame <= IGB_RXBUFFER_512) + adapter->rx_buffer_len = IGB_RXBUFFER_512; + else if (max_frame <= IGB_RXBUFFER_1024) + adapter->rx_buffer_len = IGB_RXBUFFER_1024; + else if (max_frame <= IGB_RXBUFFER_2048) + adapter->rx_buffer_len = IGB_RXBUFFER_2048; + else + adapter->rx_buffer_len = IGB_RXBUFFER_4096; + /* adjust allocation if LPE protects us, and we aren't using SBP */ + if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || + (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)) + adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE; + + dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n", + netdev->mtu, new_mtu); + netdev->mtu = new_mtu; + + if (netif_running(netdev)) + igb_up(adapter); + else + igb_reset(adapter); + + clear_bit(__IGB_RESETTING, &adapter->state); + + return 0; +} + +/** + * igb_update_stats - Update the board statistics counters + * @adapter: board private structure + **/ + +void igb_update_stats(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + u16 phy_tmp; + +#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF + + /* + * Prevent stats update while adapter is being reset, or if the pci + * connection is down. + */ + if (adapter->link_speed == 0) + return; + if (pci_channel_offline(pdev)) + return; + + adapter->stats.crcerrs += rd32(E1000_CRCERRS); + adapter->stats.gprc += rd32(E1000_GPRC); + adapter->stats.gorc += rd32(E1000_GORCL); + rd32(E1000_GORCH); /* clear GORCL */ + adapter->stats.bprc += rd32(E1000_BPRC); + adapter->stats.mprc += rd32(E1000_MPRC); + adapter->stats.roc += rd32(E1000_ROC); + + adapter->stats.prc64 += rd32(E1000_PRC64); + adapter->stats.prc127 += rd32(E1000_PRC127); + adapter->stats.prc255 += rd32(E1000_PRC255); + adapter->stats.prc511 += rd32(E1000_PRC511); + adapter->stats.prc1023 += rd32(E1000_PRC1023); + adapter->stats.prc1522 += rd32(E1000_PRC1522); + adapter->stats.symerrs += rd32(E1000_SYMERRS); + adapter->stats.sec += rd32(E1000_SEC); + + adapter->stats.mpc += rd32(E1000_MPC); + adapter->stats.scc += rd32(E1000_SCC); + adapter->stats.ecol += rd32(E1000_ECOL); + adapter->stats.mcc += rd32(E1000_MCC); + adapter->stats.latecol += rd32(E1000_LATECOL); + adapter->stats.dc += rd32(E1000_DC); + adapter->stats.rlec += rd32(E1000_RLEC); + adapter->stats.xonrxc += rd32(E1000_XONRXC); + adapter->stats.xontxc += rd32(E1000_XONTXC); + adapter->stats.xoffrxc += rd32(E1000_XOFFRXC); + adapter->stats.xofftxc += rd32(E1000_XOFFTXC); + adapter->stats.fcruc += rd32(E1000_FCRUC); + adapter->stats.gptc += rd32(E1000_GPTC); + adapter->stats.gotc += rd32(E1000_GOTCL); + rd32(E1000_GOTCH); /* clear GOTCL */ + adapter->stats.rnbc += rd32(E1000_RNBC); + adapter->stats.ruc += rd32(E1000_RUC); + adapter->stats.rfc += rd32(E1000_RFC); + adapter->stats.rjc += rd32(E1000_RJC); + adapter->stats.tor += rd32(E1000_TORH); + adapter->stats.tot += rd32(E1000_TOTH); + adapter->stats.tpr += rd32(E1000_TPR); + + adapter->stats.ptc64 += rd32(E1000_PTC64); + adapter->stats.ptc127 += rd32(E1000_PTC127); + adapter->stats.ptc255 += rd32(E1000_PTC255); + adapter->stats.ptc511 += rd32(E1000_PTC511); + adapter->stats.ptc1023 += rd32(E1000_PTC1023); + adapter->stats.ptc1522 += rd32(E1000_PTC1522); + + adapter->stats.mptc += rd32(E1000_MPTC); + adapter->stats.bptc += rd32(E1000_BPTC); + + /* used for adaptive IFS */ + + hw->mac.tx_packet_delta = rd32(E1000_TPT); + adapter->stats.tpt += hw->mac.tx_packet_delta; + hw->mac.collision_delta = rd32(E1000_COLC); + adapter->stats.colc += hw->mac.collision_delta; + + adapter->stats.algnerrc += rd32(E1000_ALGNERRC); + adapter->stats.rxerrc += rd32(E1000_RXERRC); + adapter->stats.tncrs += rd32(E1000_TNCRS); + adapter->stats.tsctc += rd32(E1000_TSCTC); + adapter->stats.tsctfc += rd32(E1000_TSCTFC); + + adapter->stats.iac += rd32(E1000_IAC); + adapter->stats.icrxoc += rd32(E1000_ICRXOC); + adapter->stats.icrxptc += rd32(E1000_ICRXPTC); + adapter->stats.icrxatc += rd32(E1000_ICRXATC); + adapter->stats.ictxptc += rd32(E1000_ICTXPTC); + adapter->stats.ictxatc += rd32(E1000_ICTXATC); + adapter->stats.ictxqec += rd32(E1000_ICTXQEC); + adapter->stats.ictxqmtc += rd32(E1000_ICTXQMTC); + adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC); + + /* Fill out the OS statistics structure */ + adapter->net_stats.multicast = adapter->stats.mprc; + adapter->net_stats.collisions = adapter->stats.colc; + + /* Rx Errors */ + + /* RLEC on some newer hardware can be incorrect so build + * our own version based on RUC and ROC */ + adapter->net_stats.rx_errors = adapter->stats.rxerrc + + adapter->stats.crcerrs + adapter->stats.algnerrc + + adapter->stats.ruc + adapter->stats.roc + + adapter->stats.cexterr; + adapter->net_stats.rx_length_errors = adapter->stats.ruc + + adapter->stats.roc; + adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; + adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc; + adapter->net_stats.rx_missed_errors = adapter->stats.mpc; + + /* Tx Errors */ + adapter->net_stats.tx_errors = adapter->stats.ecol + + adapter->stats.latecol; + adapter->net_stats.tx_aborted_errors = adapter->stats.ecol; + adapter->net_stats.tx_window_errors = adapter->stats.latecol; + adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs; + + /* Tx Dropped needs to be maintained elsewhere */ + + /* Phy Stats */ + if (hw->phy.media_type == e1000_media_type_copper) { + if ((adapter->link_speed == SPEED_1000) && + (!hw->phy.ops.read_phy_reg(hw, PHY_1000T_STATUS, + &phy_tmp))) { + phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; + adapter->phy_stats.idle_errors += phy_tmp; + } + } + + /* Management Stats */ + adapter->stats.mgptc += rd32(E1000_MGTPTC); + adapter->stats.mgprc += rd32(E1000_MGTPRC); + adapter->stats.mgpdc += rd32(E1000_MGTPDC); +} + + +static irqreturn_t igb_msix_other(int irq, void *data) +{ + struct net_device *netdev = data; + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 eicr; + /* disable interrupts from the "other" bit, avoid re-entry */ + wr32(E1000_EIMC, E1000_EIMS_OTHER); + + eicr = rd32(E1000_EICR); + + if (eicr & E1000_EIMS_OTHER) { + u32 icr = rd32(E1000_ICR); + /* reading ICR causes bit 31 of EICR to be cleared */ + if (!(icr & E1000_ICR_LSC)) + goto no_link_interrupt; + hw->mac.get_link_status = 1; + /* guard against interrupt when we're going down */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + +no_link_interrupt: + wr32(E1000_IMS, E1000_IMS_LSC); + wr32(E1000_EIMS, E1000_EIMS_OTHER); + + return IRQ_HANDLED; +} + +static irqreturn_t igb_msix_tx(int irq, void *data) +{ + struct igb_ring *tx_ring = data; + struct igb_adapter *adapter = tx_ring->adapter; + struct e1000_hw *hw = &adapter->hw; + + if (!tx_ring->itr_val) + wr32(E1000_EIMC, tx_ring->eims_value); + + tx_ring->total_bytes = 0; + tx_ring->total_packets = 0; + if (!igb_clean_tx_irq(adapter, tx_ring)) + /* Ring was not completely cleaned, so fire another interrupt */ + wr32(E1000_EICS, tx_ring->eims_value); + + if (!tx_ring->itr_val) + wr32(E1000_EIMS, tx_ring->eims_value); + return IRQ_HANDLED; +} + +static irqreturn_t igb_msix_rx(int irq, void *data) +{ + struct igb_ring *rx_ring = data; + struct igb_adapter *adapter = rx_ring->adapter; + struct e1000_hw *hw = &adapter->hw; + + if (!rx_ring->itr_val) + wr32(E1000_EIMC, rx_ring->eims_value); + + if (netif_rx_schedule_prep(adapter->netdev, &rx_ring->napi)) { + rx_ring->total_bytes = 0; + rx_ring->total_packets = 0; + rx_ring->no_itr_adjust = 0; + __netif_rx_schedule(adapter->netdev, &rx_ring->napi); + } else { + if (!rx_ring->no_itr_adjust) { + igb_lower_rx_eitr(adapter, rx_ring); + rx_ring->no_itr_adjust = 1; + } + } + + return IRQ_HANDLED; +} + + +/** + * igb_intr_msi - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ +static irqreturn_t igb_intr_msi(int irq, void *data) +{ + struct net_device *netdev = data; + struct igb_adapter *adapter = netdev_priv(netdev); + struct napi_struct *napi = &adapter->napi; + struct e1000_hw *hw = &adapter->hw; + /* read ICR disables interrupts using IAM */ + u32 icr = rd32(E1000_ICR); + + /* Write the ITR value calculated at the end of the + * previous interrupt. + */ + if (adapter->set_itr) { + wr32(E1000_ITR, + 1000000000 / (adapter->itr * 256)); + adapter->set_itr = 0; + } + + /* read ICR disables interrupts using IAM */ + if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { + hw->mac.get_link_status = 1; + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + + if (netif_rx_schedule_prep(netdev, napi)) { + adapter->tx_ring->total_bytes = 0; + adapter->tx_ring->total_packets = 0; + adapter->rx_ring->total_bytes = 0; + adapter->rx_ring->total_packets = 0; + __netif_rx_schedule(netdev, napi); + } + + return IRQ_HANDLED; +} + +/** + * igb_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ +static irqreturn_t igb_intr(int irq, void *data) +{ + struct net_device *netdev = data; + struct igb_adapter *adapter = netdev_priv(netdev); + struct napi_struct *napi = &adapter->napi; + struct e1000_hw *hw = &adapter->hw; + /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No + * need for the IMC write */ + u32 icr = rd32(E1000_ICR); + u32 eicr = 0; + if (!icr) + return IRQ_NONE; /* Not our interrupt */ + + /* Write the ITR value calculated at the end of the + * previous interrupt. + */ + if (adapter->set_itr) { + wr32(E1000_ITR, + 1000000000 / (adapter->itr * 256)); + adapter->set_itr = 0; + } + + /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is + * not set, then the adapter didn't send an interrupt */ + if (!(icr & E1000_ICR_INT_ASSERTED)) + return IRQ_NONE; + + eicr = rd32(E1000_EICR); + + if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { + hw->mac.get_link_status = 1; + /* guard against interrupt when we're going down */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + + if (netif_rx_schedule_prep(netdev, napi)) { + adapter->tx_ring->total_bytes = 0; + adapter->rx_ring->total_bytes = 0; + adapter->tx_ring->total_packets = 0; + adapter->rx_ring->total_packets = 0; + __netif_rx_schedule(netdev, napi); + } + + return IRQ_HANDLED; +} + +/** + * igb_clean - NAPI Rx polling callback + * @adapter: board private structure + **/ +static int igb_clean(struct napi_struct *napi, int budget) +{ + struct igb_adapter *adapter = container_of(napi, struct igb_adapter, + napi); + struct net_device *netdev = adapter->netdev; + int tx_clean_complete = 1, work_done = 0; + int i; + + /* Must NOT use netdev_priv macro here. */ + adapter = netdev->priv; + + /* Keep link state information with original netdev */ + if (!netif_carrier_ok(netdev)) + goto quit_polling; + + /* igb_clean is called per-cpu. This lock protects tx_ring[i] from + * being cleaned by multiple cpus simultaneously. A failure obtaining + * the lock means tx_ring[i] is currently being cleaned anyway. */ + for (i = 0; i < adapter->num_tx_queues; i++) { + if (spin_trylock(&adapter->tx_ring[i].tx_clean_lock)) { + tx_clean_complete &= igb_clean_tx_irq(adapter, + &adapter->tx_ring[i]); + spin_unlock(&adapter->tx_ring[i].tx_clean_lock); + } + } + + for (i = 0; i < adapter->num_rx_queues; i++) + igb_clean_rx_irq_adv(adapter, &adapter->rx_ring[i], &work_done, + adapter->rx_ring[i].napi.weight); + + /* If no Tx and not enough Rx work done, exit the polling mode */ + if ((tx_clean_complete && (work_done < budget)) || + !netif_running(netdev)) { +quit_polling: + if (adapter->itr_setting & 3) + igb_set_itr(adapter, E1000_ITR, false); + netif_rx_complete(netdev, napi); + if (!test_bit(__IGB_DOWN, &adapter->state)) + igb_irq_enable(adapter); + return 0; + } + + return 1; +} + +static int igb_clean_rx_ring_msix(struct napi_struct *napi, int budget) +{ + struct igb_ring *rx_ring = container_of(napi, struct igb_ring, napi); + struct igb_adapter *adapter = rx_ring->adapter; + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + int work_done = 0; + + /* Keep link state information with original netdev */ + if (!netif_carrier_ok(netdev)) + goto quit_polling; + + igb_clean_rx_irq_adv(adapter, rx_ring, &work_done, budget); + + + /* If not enough Rx work done, exit the polling mode */ + if ((work_done == 0) || !netif_running(netdev)) { +quit_polling: + netif_rx_complete(netdev, napi); + + wr32(E1000_EIMS, rx_ring->eims_value); + if ((adapter->itr_setting & 3) && !rx_ring->no_itr_adjust && + (rx_ring->total_packets > IGB_DYN_ITR_PACKET_THRESHOLD)) { + int mean_size = rx_ring->total_bytes / + rx_ring->total_packets; + if (mean_size < IGB_DYN_ITR_LENGTH_LOW) + igb_raise_rx_eitr(adapter, rx_ring); + else if (mean_size > IGB_DYN_ITR_LENGTH_HIGH) + igb_lower_rx_eitr(adapter, rx_ring); + } + return 0; + } + + return 1; +} +/** + * igb_clean_tx_irq - Reclaim resources after transmit completes + * @adapter: board private structure + * returns true if ring is completely cleaned + **/ +static bool igb_clean_tx_irq(struct igb_adapter *adapter, + struct igb_ring *tx_ring) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + struct e1000_tx_desc *tx_desc; + struct igb_buffer *buffer_info; + struct sk_buff *skb; + unsigned int i; + u32 head, oldhead; + unsigned int count = 0; + bool cleaned = false; + bool retval = true; + unsigned int total_bytes = 0, total_packets = 0; + + rmb(); + head = *(volatile u32 *)((struct e1000_tx_desc *)tx_ring->desc + + tx_ring->count); + head = le32_to_cpu(head); + i = tx_ring->next_to_clean; + while (1) { + while (i != head) { + cleaned = true; + tx_desc = E1000_TX_DESC(*tx_ring, i); + buffer_info = &tx_ring->buffer_info[i]; + skb = buffer_info->skb; + + if (skb) { + unsigned int segs, bytecount; + /* gso_segs is currently only valid for tcp */ + segs = skb_shinfo(skb)->gso_segs ?: 1; + /* multiply data chunks by size of headers */ + bytecount = ((segs - 1) * skb_headlen(skb)) + + skb->len; + total_packets += segs; + total_bytes += bytecount; + } + + igb_unmap_and_free_tx_resource(adapter, buffer_info); + tx_desc->upper.data = 0; + + i++; + if (i == tx_ring->count) + i = 0; + + count++; + if (count == IGB_MAX_TX_CLEAN) { + retval = false; + goto done_cleaning; + } + } + oldhead = head; + rmb(); + head = *(volatile u32 *)((struct e1000_tx_desc *)tx_ring->desc + + tx_ring->count); + head = le32_to_cpu(head); + if (head == oldhead) + goto done_cleaning; + } /* while (1) */ + +done_cleaning: + tx_ring->next_to_clean = i; + + if (unlikely(cleaned && + netif_carrier_ok(netdev) && + IGB_DESC_UNUSED(tx_ring) >= IGB_TX_QUEUE_WAKE)) { + /* Make sure that anybody stopping the queue after this + * sees the new next_to_clean. + */ + smp_mb(); + if (netif_queue_stopped(netdev) && + !(test_bit(__IGB_DOWN, &adapter->state))) { + netif_wake_queue(netdev); + ++adapter->restart_queue; + } + } + + if (tx_ring->detect_tx_hung) { + /* Detect a transmit hang in hardware, this serializes the + * check with the clearing of time_stamp and movement of i */ + tx_ring->detect_tx_hung = false; + if (tx_ring->buffer_info[i].time_stamp && + time_after(jiffies, tx_ring->buffer_info[i].time_stamp + + (adapter->tx_timeout_factor * HZ)) + && !(rd32(E1000_STATUS) & + E1000_STATUS_TXOFF)) { + + tx_desc = E1000_TX_DESC(*tx_ring, i); + /* detected Tx unit hang */ + dev_err(&adapter->pdev->dev, + "Detected Tx Unit Hang\n" + " Tx Queue <%lu>\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + " head (WB) <%x>\n" + "buffer_info[next_to_clean]\n" + " time_stamp <%lx>\n" + " jiffies <%lx>\n" + " desc.status <%x>\n", + (unsigned long)((tx_ring - adapter->tx_ring) / + sizeof(struct igb_ring)), + readl(adapter->hw.hw_addr + tx_ring->head), + readl(adapter->hw.hw_addr + tx_ring->tail), + tx_ring->next_to_use, + tx_ring->next_to_clean, + head, + tx_ring->buffer_info[i].time_stamp, + jiffies, + tx_desc->upper.fields.status); + netif_stop_queue(netdev); + } + } + tx_ring->total_bytes += total_bytes; + tx_ring->total_packets += total_packets; + adapter->net_stats.tx_bytes += total_bytes; + adapter->net_stats.tx_packets += total_packets; + return retval; +} + + +/** + * igb_receive_skb - helper function to handle rx indications + * @adapter: board private structure + * @status: descriptor status field as written by hardware + * @vlan: descriptor vlan field as written by hardware (no le/be conversion) + * @skb: pointer to sk_buff to be indicated to stack + **/ +static void igb_receive_skb(struct igb_adapter *adapter, u8 status, u16 vlan, + struct sk_buff *skb) +{ + if (adapter->vlgrp && (status & E1000_RXD_STAT_VP)) + vlan_hwaccel_receive_skb(skb, adapter->vlgrp, + le16_to_cpu(vlan) & + E1000_RXD_SPC_VLAN_MASK); + else + netif_receive_skb(skb); +} + + +static inline void igb_rx_checksum_adv(struct igb_adapter *adapter, + u32 status_err, struct sk_buff *skb) +{ + skb->ip_summed = CHECKSUM_NONE; + + /* Ignore Checksum bit is set or checksum is disabled through ethtool */ + if ((status_err & E1000_RXD_STAT_IXSM) || !adapter->rx_csum) + return; + /* TCP/UDP checksum error bit is set */ + if (status_err & + (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) { + /* let the stack verify checksum errors */ + adapter->hw_csum_err++; + return; + } + /* It must be a TCP or UDP packet with a valid checksum */ + if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)) + skb->ip_summed = CHECKSUM_UNNECESSARY; + + adapter->hw_csum_good++; +} + +static bool igb_clean_rx_irq_adv(struct igb_adapter *adapter, + struct igb_ring *rx_ring, + int *work_done, int budget) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + union e1000_adv_rx_desc *rx_desc , *next_rxd; + struct igb_buffer *buffer_info , *next_buffer; + struct sk_buff *skb; + unsigned int i, j; + u32 length, hlen, staterr; + bool cleaned = false; + int cleaned_count = 0; + unsigned int total_bytes = 0, total_packets = 0; + + i = rx_ring->next_to_clean; + rx_desc = E1000_RX_DESC_ADV(*rx_ring, i); + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + + while (staterr & E1000_RXD_STAT_DD) { + if (*work_done >= budget) + break; + (*work_done)++; + buffer_info = &rx_ring->buffer_info[i]; + + /* HW will not DMA in data larger than the given buffer, even + * if it parses the (NFS, of course) header to be larger. In + * that case, it fills the header buffer and spills the rest + * into the page. + */ + hlen = le16_to_cpu((rx_desc->wb.lower.lo_dword.hdr_info & + E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT); + if (hlen > adapter->rx_ps_hdr_size) + hlen = adapter->rx_ps_hdr_size; + + length = le16_to_cpu(rx_desc->wb.upper.length); + cleaned = true; + cleaned_count++; + + if (rx_ring->pending_skb != NULL) { + skb = rx_ring->pending_skb; + rx_ring->pending_skb = NULL; + j = rx_ring->pending_skb_page; + } else { + skb = buffer_info->skb; + prefetch(skb->data - NET_IP_ALIGN); + buffer_info->skb = NULL; + if (hlen) { + pci_unmap_single(pdev, buffer_info->dma, + adapter->rx_ps_hdr_size + + NET_IP_ALIGN, + PCI_DMA_FROMDEVICE); + skb_put(skb, hlen); + } else { + pci_unmap_single(pdev, buffer_info->dma, + adapter->rx_buffer_len + + NET_IP_ALIGN, + PCI_DMA_FROMDEVICE); + skb_put(skb, length); + goto send_up; + } + j = 0; + } + + while (length) { + pci_unmap_page(pdev, buffer_info->page_dma, + PAGE_SIZE, PCI_DMA_FROMDEVICE); + buffer_info->page_dma = 0; + skb_fill_page_desc(skb, j, buffer_info->page, + 0, length); + buffer_info->page = NULL; + + skb->len += length; + skb->data_len += length; + skb->truesize += length; + rx_desc->wb.upper.status_error = 0; + if (staterr & E1000_RXD_STAT_EOP) + break; + + j++; + cleaned_count++; + i++; + if (i == rx_ring->count) + i = 0; + + buffer_info = &rx_ring->buffer_info[i]; + rx_desc = E1000_RX_DESC_ADV(*rx_ring, i); + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + length = le16_to_cpu(rx_desc->wb.upper.length); + if (!(staterr & E1000_RXD_STAT_DD)) { + rx_ring->pending_skb = skb; + rx_ring->pending_skb_page = j; + goto out; + } + } +send_up: + pskb_trim(skb, skb->len - 4); + i++; + if (i == rx_ring->count) + i = 0; + next_rxd = E1000_RX_DESC_ADV(*rx_ring, i); + prefetch(next_rxd); + next_buffer = &rx_ring->buffer_info[i]; + + if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) { + dev_kfree_skb_irq(skb); + goto next_desc; + } + rx_ring->no_itr_adjust |= (staterr & E1000_RXD_STAT_DYNINT); + + total_bytes += skb->len; + total_packets++; + + igb_rx_checksum_adv(adapter, staterr, skb); + + skb->protocol = eth_type_trans(skb, netdev); + + igb_receive_skb(adapter, staterr, rx_desc->wb.upper.vlan, skb); + + netdev->last_rx = jiffies; + +next_desc: + rx_desc->wb.upper.status_error = 0; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= IGB_RX_BUFFER_WRITE) { + igb_alloc_rx_buffers_adv(adapter, rx_ring, + cleaned_count); + cleaned_count = 0; + } + + /* use prefetched values */ + rx_desc = next_rxd; + buffer_info = next_buffer; + + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + } +out: + rx_ring->next_to_clean = i; + cleaned_count = IGB_DESC_UNUSED(rx_ring); + + if (cleaned_count) + igb_alloc_rx_buffers_adv(adapter, rx_ring, cleaned_count); + + rx_ring->total_packets += total_packets; + rx_ring->total_bytes += total_bytes; + rx_ring->rx_stats.packets += total_packets; + rx_ring->rx_stats.bytes += total_bytes; + adapter->net_stats.rx_bytes += total_bytes; + adapter->net_stats.rx_packets += total_packets; + return cleaned; +} + + +/** + * igb_alloc_rx_buffers_adv - Replace used receive buffers; packet split + * @adapter: address of board private structure + **/ +static void igb_alloc_rx_buffers_adv(struct igb_adapter *adapter, + struct igb_ring *rx_ring, + int cleaned_count) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + union e1000_adv_rx_desc *rx_desc; + struct igb_buffer *buffer_info; + struct sk_buff *skb; + unsigned int i; + + i = rx_ring->next_to_use; + buffer_info = &rx_ring->buffer_info[i]; + + while (cleaned_count--) { + rx_desc = E1000_RX_DESC_ADV(*rx_ring, i); + + if (adapter->rx_ps_hdr_size && !buffer_info->page) { + buffer_info->page = alloc_page(GFP_ATOMIC); + if (!buffer_info->page) { + adapter->alloc_rx_buff_failed++; + goto no_buffers; + } + buffer_info->page_dma = + pci_map_page(pdev, + buffer_info->page, + 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + } + + if (!buffer_info->skb) { + int bufsz; + + if (adapter->rx_ps_hdr_size) + bufsz = adapter->rx_ps_hdr_size; + else + bufsz = adapter->rx_buffer_len; + bufsz += NET_IP_ALIGN; + skb = netdev_alloc_skb(netdev, bufsz); + + if (!skb) { + adapter->alloc_rx_buff_failed++; + goto no_buffers; + } + + /* Make buffer alignment 2 beyond a 16 byte boundary + * this will result in a 16 byte aligned IP header after + * the 14 byte MAC header is removed + */ + skb_reserve(skb, NET_IP_ALIGN); + + buffer_info->skb = skb; + buffer_info->dma = pci_map_single(pdev, skb->data, + bufsz, + PCI_DMA_FROMDEVICE); + + } + /* Refresh the desc even if buffer_addrs didn't change because + * each write-back erases this info. */ + if (adapter->rx_ps_hdr_size) { + rx_desc->read.pkt_addr = + cpu_to_le64(buffer_info->page_dma); + rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma); + } else { + rx_desc->read.pkt_addr = + cpu_to_le64(buffer_info->dma); + rx_desc->read.hdr_addr = 0; + } + + i++; + if (i == rx_ring->count) + i = 0; + buffer_info = &rx_ring->buffer_info[i]; + } + +no_buffers: + if (rx_ring->next_to_use != i) { + rx_ring->next_to_use = i; + if (i == 0) + i = (rx_ring->count - 1); + else + i--; + + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). */ + wmb(); + writel(i, adapter->hw.hw_addr + rx_ring->tail); + } +} + +/** + * igb_mii_ioctl - + * @netdev: + * @ifreq: + * @cmd: + **/ +static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct mii_ioctl_data *data = if_mii(ifr); + + if (adapter->hw.phy.media_type != e1000_media_type_copper) + return -EOPNOTSUPP; + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = adapter->hw.phy.addr; + break; + case SIOCGMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (adapter->hw.phy.ops.read_phy_reg(&adapter->hw, + data->reg_num + & 0x1F, &data->val_out)) + return -EIO; + break; + case SIOCSMIIREG: + default: + return -EOPNOTSUPP; + } + return 0; +} + +/** + * igb_ioctl - + * @netdev: + * @ifreq: + * @cmd: + **/ +static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return igb_mii_ioctl(netdev, ifr, cmd); + default: + return -EOPNOTSUPP; + } +} + +static void igb_vlan_rx_register(struct net_device *netdev, + struct vlan_group *grp) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ctrl, rctl; + + igb_irq_disable(adapter); + adapter->vlgrp = grp; + + if (grp) { + /* enable VLAN tag insert/strip */ + ctrl = rd32(E1000_CTRL); + ctrl |= E1000_CTRL_VME; + wr32(E1000_CTRL, ctrl); + + /* enable VLAN receive filtering */ + rctl = rd32(E1000_RCTL); + rctl |= E1000_RCTL_VFE; + rctl &= ~E1000_RCTL_CFIEN; + wr32(E1000_RCTL, rctl); + igb_update_mng_vlan(adapter); + wr32(E1000_RLPML, + adapter->max_frame_size + VLAN_TAG_SIZE); + } else { + /* disable VLAN tag insert/strip */ + ctrl = rd32(E1000_CTRL); + ctrl &= ~E1000_CTRL_VME; + wr32(E1000_CTRL, ctrl); + + /* disable VLAN filtering */ + rctl = rd32(E1000_RCTL); + rctl &= ~E1000_RCTL_VFE; + wr32(E1000_RCTL, rctl); + if (adapter->mng_vlan_id != (u16)IGB_MNG_VLAN_NONE) { + igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + adapter->mng_vlan_id = IGB_MNG_VLAN_NONE; + } + wr32(E1000_RLPML, + adapter->max_frame_size); + } + + if (!test_bit(__IGB_DOWN, &adapter->state)) + igb_irq_enable(adapter); +} + +static void igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 vfta, index; + + if ((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && + (vid == adapter->mng_vlan_id)) + return; + /* add VID to filter table */ + index = (vid >> 5) & 0x7F; + vfta = array_rd32(E1000_VFTA, index); + vfta |= (1 << (vid & 0x1F)); + igb_write_vfta(&adapter->hw, index, vfta); +} + +static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 vfta, index; + + igb_irq_disable(adapter); + vlan_group_set_device(adapter->vlgrp, vid, NULL); + + if (!test_bit(__IGB_DOWN, &adapter->state)) + igb_irq_enable(adapter); + + if ((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && + (vid == adapter->mng_vlan_id)) { + /* release control to f/w */ + igb_release_hw_control(adapter); + return; + } + + /* remove VID from filter table */ + index = (vid >> 5) & 0x7F; + vfta = array_rd32(E1000_VFTA, index); + vfta &= ~(1 << (vid & 0x1F)); + igb_write_vfta(&adapter->hw, index, vfta); +} + +static void igb_restore_vlan(struct igb_adapter *adapter) +{ + igb_vlan_rx_register(adapter->netdev, adapter->vlgrp); + + if (adapter->vlgrp) { + u16 vid; + for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { + if (!vlan_group_get_device(adapter->vlgrp, vid)) + continue; + igb_vlan_rx_add_vid(adapter->netdev, vid); + } + } +} + +int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx) +{ + struct e1000_mac_info *mac = &adapter->hw.mac; + + mac->autoneg = 0; + + /* Fiber NICs only allow 1000 gbps Full duplex */ + if ((adapter->hw.phy.media_type == e1000_media_type_fiber) && + spddplx != (SPEED_1000 + DUPLEX_FULL)) { + dev_err(&adapter->pdev->dev, + "Unsupported Speed/Duplex configuration\n"); + return -EINVAL; + } + + switch (spddplx) { + case SPEED_10 + DUPLEX_HALF: + mac->forced_speed_duplex = ADVERTISE_10_HALF; + break; + case SPEED_10 + DUPLEX_FULL: + mac->forced_speed_duplex = ADVERTISE_10_FULL; + break; + case SPEED_100 + DUPLEX_HALF: + mac->forced_speed_duplex = ADVERTISE_100_HALF; + break; + case SPEED_100 + DUPLEX_FULL: + mac->forced_speed_duplex = ADVERTISE_100_FULL; + break; + case SPEED_1000 + DUPLEX_FULL: + mac->autoneg = 1; + adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL; + break; + case SPEED_1000 + DUPLEX_HALF: /* not supported */ + default: + dev_err(&adapter->pdev->dev, + "Unsupported Speed/Duplex configuration\n"); + return -EINVAL; + } + return 0; +} + + +static int igb_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ctrl, ctrl_ext, rctl, status; + u32 wufc = adapter->wol; +#ifdef CONFIG_PM + int retval = 0; +#endif + + netif_device_detach(netdev); + + if (netif_running(netdev)) { + WARN_ON(test_bit(__IGB_RESETTING, &adapter->state)); + igb_down(adapter); + igb_free_irq(adapter); + } + +#ifdef CONFIG_PM + retval = pci_save_state(pdev); + if (retval) + return retval; +#endif + + status = rd32(E1000_STATUS); + if (status & E1000_STATUS_LU) + wufc &= ~E1000_WUFC_LNKC; + + if (wufc) { + igb_setup_rctl(adapter); + igb_set_multi(netdev); + + /* turn on all-multi mode if wake on multicast is enabled */ + if (wufc & E1000_WUFC_MC) { + rctl = rd32(E1000_RCTL); + rctl |= E1000_RCTL_MPE; + wr32(E1000_RCTL, rctl); + } + + ctrl = rd32(E1000_CTRL); + /* advertise wake from D3Cold */ + #define E1000_CTRL_ADVD3WUC 0x00100000 + /* phy power management enable */ + #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 + ctrl |= E1000_CTRL_ADVD3WUC; + wr32(E1000_CTRL, ctrl); + + if (adapter->hw.phy.media_type == e1000_media_type_fiber || + adapter->hw.phy.media_type == + e1000_media_type_internal_serdes) { + /* keep the laser running in D3 */ + ctrl_ext = rd32(E1000_CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA; + wr32(E1000_CTRL_EXT, ctrl_ext); + } + + /* Allow time for pending master requests to run */ + igb_disable_pcie_master(&adapter->hw); + + wr32(E1000_WUC, E1000_WUC_PME_EN); + wr32(E1000_WUFC, wufc); + pci_enable_wake(pdev, PCI_D3hot, 1); + pci_enable_wake(pdev, PCI_D3cold, 1); + } else { + wr32(E1000_WUC, 0); + wr32(E1000_WUFC, 0); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + } + + igb_release_manageability(adapter); + + /* make sure adapter isn't asleep if manageability is enabled */ + if (adapter->en_mng_pt) { + pci_enable_wake(pdev, PCI_D3hot, 1); + pci_enable_wake(pdev, PCI_D3cold, 1); + } + + /* Release control of h/w to f/w. If f/w is AMT enabled, this + * would have already happened in close and is redundant. */ + igb_release_hw_control(adapter); + + pci_disable_device(pdev); + + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +#ifdef CONFIG_PM +static int igb_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, + "igb: Cannot enable PCI device from suspend\n"); + return err; + } + pci_set_master(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + if (netif_running(netdev)) { + err = igb_request_irq(adapter); + if (err) + return err; + } + + /* e1000_power_up_phy(adapter); */ + + igb_reset(adapter); + wr32(E1000_WUS, ~0); + + igb_init_manageability(adapter); + + if (netif_running(netdev)) + igb_up(adapter); + + netif_device_attach(netdev); + + /* let the f/w know that the h/w is now under the control of the + * driver. */ + igb_get_hw_control(adapter); + + return 0; +} +#endif + +static void igb_shutdown(struct pci_dev *pdev) +{ + igb_suspend(pdev, PMSG_SUSPEND); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void igb_netpoll(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + int i; + int work_done = 0; + + igb_irq_disable(adapter); + for (i = 0; i < adapter->num_tx_queues; i++) + igb_clean_tx_irq(adapter, &adapter->tx_ring[i]); + + for (i = 0; i < adapter->num_rx_queues; i++) + igb_clean_rx_irq_adv(adapter, &adapter->rx_ring[i], + &work_done, + adapter->rx_ring[i].napi.weight); + + igb_irq_enable(adapter); +} +#endif /* CONFIG_NET_POLL_CONTROLLER */ + +/** + * igb_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + + netif_device_detach(netdev); + + if (netif_running(netdev)) + igb_down(adapter); + pci_disable_device(pdev); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * igb_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. Implementation + * resembles the first-half of the igb_resume routine. + */ +static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + pci_set_master(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + igb_reset(adapter); + wr32(E1000_WUS, ~0); + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * igb_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. Implementation resembles the + * second-half of the igb_resume routine. + */ +static void igb_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + + igb_init_manageability(adapter); + + if (netif_running(netdev)) { + if (igb_up(adapter)) { + dev_err(&pdev->dev, "igb_up failed after reset\n"); + return; + } + } + + netif_device_attach(netdev); + + /* let the f/w know that the h/w is now under the control of the + * driver. */ + igb_get_hw_control(adapter); + +} + +/* igb_main.c */ |