aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/irda/act200l-sir.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/irda/act200l-sir.c')
-rw-r--r--drivers/net/irda/act200l-sir.c257
1 files changed, 257 insertions, 0 deletions
diff --git a/drivers/net/irda/act200l-sir.c b/drivers/net/irda/act200l-sir.c
new file mode 100644
index 00000000000..d8b89c74aab
--- /dev/null
+++ b/drivers/net/irda/act200l-sir.c
@@ -0,0 +1,257 @@
+/*********************************************************************
+ *
+ * Filename: act200l.c
+ * Version: 0.8
+ * Description: Implementation for the ACTiSYS ACT-IR200L dongle
+ * Status: Experimental.
+ * Author: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
+ * Created at: Fri Aug 3 17:35:42 2001
+ * Modified at: Fri Aug 17 10:22:40 2001
+ * Modified by: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
+ *
+ * Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+static int act200l_reset(struct sir_dev *dev);
+static int act200l_open(struct sir_dev *dev);
+static int act200l_close(struct sir_dev *dev);
+static int act200l_change_speed(struct sir_dev *dev, unsigned speed);
+
+/* Regsiter 0: Control register #1 */
+#define ACT200L_REG0 0x00
+#define ACT200L_TXEN 0x01 /* Enable transmitter */
+#define ACT200L_RXEN 0x02 /* Enable receiver */
+
+/* Register 1: Control register #2 */
+#define ACT200L_REG1 0x10
+#define ACT200L_LODB 0x01 /* Load new baud rate count value */
+#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
+
+/* Register 4: Output Power register */
+#define ACT200L_REG4 0x40
+#define ACT200L_OP0 0x01 /* Enable LED1C output */
+#define ACT200L_OP1 0x02 /* Enable LED2C output */
+#define ACT200L_BLKR 0x04
+
+/* Register 5: Receive Mode register */
+#define ACT200L_REG5 0x50
+#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
+
+/* Register 6: Receive Sensitivity register #1 */
+#define ACT200L_REG6 0x60
+#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
+#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
+
+/* Register 7: Receive Sensitivity register #2 */
+#define ACT200L_REG7 0x70
+#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
+
+/* Register 8,9: Baud Rate Dvider register #1,#2 */
+#define ACT200L_REG8 0x80
+#define ACT200L_REG9 0x90
+
+#define ACT200L_2400 0x5f
+#define ACT200L_9600 0x17
+#define ACT200L_19200 0x0b
+#define ACT200L_38400 0x05
+#define ACT200L_57600 0x03
+#define ACT200L_115200 0x01
+
+/* Register 13: Control register #3 */
+#define ACT200L_REG13 0xd0
+#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
+
+/* Register 15: Status register */
+#define ACT200L_REG15 0xf0
+
+/* Register 21: Control register #4 */
+#define ACT200L_REG21 0x50
+#define ACT200L_EXCK 0x02 /* Disable clock output driver */
+#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
+
+static struct dongle_driver act200l = {
+ .owner = THIS_MODULE,
+ .driver_name = "ACTiSYS ACT-IR200L",
+ .type = IRDA_ACT200L_DONGLE,
+ .open = act200l_open,
+ .close = act200l_close,
+ .reset = act200l_reset,
+ .set_speed = act200l_change_speed,
+};
+
+static int __init act200l_sir_init(void)
+{
+ return irda_register_dongle(&act200l);
+}
+
+static void __exit act200l_sir_cleanup(void)
+{
+ irda_unregister_dongle(&act200l);
+}
+
+static int act200l_open(struct sir_dev *dev)
+{
+ struct qos_info *qos = &dev->qos;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ /* Power on the dongle */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Set the speeds we can accept */
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ qos->min_turn_time.bits = 0x03;
+ irda_qos_bits_to_value(qos);
+
+ /* irda thread waits 50 msec for power settling */
+
+ return 0;
+}
+
+static int act200l_close(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ /* Power off the dongle */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ return 0;
+}
+
+/*
+ * Function act200l_change_speed (dev, speed)
+ *
+ * Set the speed for the ACTiSYS ACT-IR200L type dongle.
+ *
+ */
+static int act200l_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ u8 control[3];
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ /* Clear DTR and set RTS to enter command mode */
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+
+ switch (speed) {
+ default:
+ ret = -EINVAL;
+ /* fall through */
+ case 9600:
+ control[0] = ACT200L_REG8 | (ACT200L_9600 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
+ break;
+ case 19200:
+ control[0] = ACT200L_REG8 | (ACT200L_19200 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
+ break;
+ case 38400:
+ control[0] = ACT200L_REG8 | (ACT200L_38400 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
+ break;
+ case 57600:
+ control[0] = ACT200L_REG8 | (ACT200L_57600 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
+ break;
+ case 115200:
+ control[0] = ACT200L_REG8 | (ACT200L_115200 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
+ break;
+ }
+ control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;
+
+ /* Write control bytes */
+ sirdev_raw_write(dev, control, 3);
+ msleep(5);
+
+ /* Go back to normal mode */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ dev->speed = speed;
+ return ret;
+}
+
+/*
+ * Function act200l_reset (driver)
+ *
+ * Reset the ACTiSYS ACT-IR200L type dongle.
+ */
+
+#define ACT200L_STATE_WAIT1_RESET (SIRDEV_STATE_DONGLE_RESET+1)
+#define ACT200L_STATE_WAIT2_RESET (SIRDEV_STATE_DONGLE_RESET+2)
+
+static int act200l_reset(struct sir_dev *dev)
+{
+ unsigned state = dev->fsm.substate;
+ unsigned delay = 0;
+ u8 control[9] = {
+ ACT200L_REG15,
+ ACT200L_REG13 | ACT200L_SHDW,
+ ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
+ ACT200L_REG13,
+ ACT200L_REG7 | ACT200L_ENPOS,
+ ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1,
+ ACT200L_REG5 | ACT200L_RWIDL,
+ ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR,
+ ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN
+ };
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ switch (state) {
+ case SIRDEV_STATE_DONGLE_RESET:
+ /* Reset the dongle : set RTS low for 25 ms */
+ sirdev_set_dtr_rts(dev, TRUE, FALSE);
+ state = ACT200L_STATE_WAIT1_RESET;
+ delay = 50;
+ break;
+
+ case ACT200L_STATE_WAIT1_RESET:
+ /* Clear DTR and set RTS to enter command mode */
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+
+ udelay(25); /* better wait for some short while */
+
+ /* Write control bytes */
+ sirdev_raw_write(dev, control, sizeof(control));
+ state = ACT200L_STATE_WAIT2_RESET;
+ delay = 15;
+ break;
+
+ case ACT200L_STATE_WAIT2_RESET:
+ /* Go back to normal mode */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+ dev->speed = 9600;
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n", __FUNCTION__, state);
+ ret = -1;
+ break;
+ }
+ dev->fsm.substate = state;
+ return (delay > 0) ? delay : ret;
+}
+
+MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
+MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */
+
+module_init(act200l_sir_init);
+module_exit(act200l_sir_cleanup);