aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/irda/sa1100_ir.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/irda/sa1100_ir.c')
-rw-r--r--drivers/net/irda/sa1100_ir.c1045
1 files changed, 1045 insertions, 0 deletions
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
new file mode 100644
index 00000000000..89f5096cab7
--- /dev/null
+++ b/drivers/net/irda/sa1100_ir.c
@@ -0,0 +1,1045 @@
+/*
+ * linux/drivers/net/irda/sa1100_ir.c
+ *
+ * Copyright (C) 2000-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Infra-red driver for the StrongARM SA1100 embedded microprocessor
+ *
+ * Note that we don't have to worry about the SA1111's DMA bugs in here,
+ * so we use the straight forward dma_map_* functions with a null pointer.
+ *
+ * This driver takes one kernel command line parameter, sa1100ir=, with
+ * the following options:
+ * max_rate:baudrate - set the maximum baud rate
+ * power_leve:level - set the transmitter power level
+ * tx_lpm:0|1 - set transmit low power mode
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/hardware.h>
+#include <asm/mach/irda.h>
+
+static int power_level = 3;
+static int tx_lpm;
+static int max_rate = 4000000;
+
+struct sa1100_irda {
+ unsigned char hscr0;
+ unsigned char utcr4;
+ unsigned char power;
+ unsigned char open;
+
+ int speed;
+ int newspeed;
+
+ struct sk_buff *txskb;
+ struct sk_buff *rxskb;
+ dma_addr_t txbuf_dma;
+ dma_addr_t rxbuf_dma;
+ dma_regs_t *txdma;
+ dma_regs_t *rxdma;
+
+ struct net_device_stats stats;
+ struct device *dev;
+ struct irda_platform_data *pdata;
+ struct irlap_cb *irlap;
+ struct qos_info qos;
+
+ iobuff_t tx_buff;
+ iobuff_t rx_buff;
+};
+
+#define IS_FIR(si) ((si)->speed >= 4000000)
+
+#define HPSIR_MAX_RXLEN 2047
+
+/*
+ * Allocate and map the receive buffer, unless it is already allocated.
+ */
+static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
+{
+ if (si->rxskb)
+ return 0;
+
+ si->rxskb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
+
+ if (!si->rxskb) {
+ printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Align any IP headers that may be contained
+ * within the frame.
+ */
+ skb_reserve(si->rxskb, 1);
+
+ si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
+ HPSIR_MAX_RXLEN,
+ DMA_FROM_DEVICE);
+ return 0;
+}
+
+/*
+ * We want to get here as soon as possible, and get the receiver setup.
+ * We use the existing buffer.
+ */
+static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
+{
+ if (!si->rxskb) {
+ printk(KERN_ERR "sa1100_ir: rx buffer went missing\n");
+ return;
+ }
+
+ /*
+ * First empty receive FIFO
+ */
+ Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+
+ /*
+ * Enable the DMA, receiver and receive interrupt.
+ */
+ sa1100_clear_dma(si->rxdma);
+ sa1100_start_dma(si->rxdma, si->rxbuf_dma, HPSIR_MAX_RXLEN);
+ Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_RXE;
+}
+
+/*
+ * Set the IrDA communications speed.
+ */
+static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
+{
+ unsigned long flags;
+ int brd, ret = -EINVAL;
+
+ switch (speed) {
+ case 9600: case 19200: case 38400:
+ case 57600: case 115200:
+ brd = 3686400 / (16 * speed) - 1;
+
+ /*
+ * Stop the receive DMA.
+ */
+ if (IS_FIR(si))
+ sa1100_stop_dma(si->rxdma);
+
+ local_irq_save(flags);
+
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = HSCR0_UART;
+
+ Ser2UTCR1 = brd >> 8;
+ Ser2UTCR2 = brd;
+
+ /*
+ * Clear status register
+ */
+ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+ Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+
+ if (si->pdata->set_speed)
+ si->pdata->set_speed(si->dev, speed);
+
+ si->speed = speed;
+
+ local_irq_restore(flags);
+ ret = 0;
+ break;
+
+ case 4000000:
+ local_irq_save(flags);
+
+ si->hscr0 = 0;
+
+ Ser2HSSR0 = 0xff;
+ Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+ Ser2UTCR3 = 0;
+
+ si->speed = speed;
+
+ if (si->pdata->set_speed)
+ si->pdata->set_speed(si->dev, speed);
+
+ sa1100_irda_rx_alloc(si);
+ sa1100_irda_rx_dma_start(si);
+
+ local_irq_restore(flags);
+
+ break;
+
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Control the power state of the IrDA transmitter.
+ * State:
+ * 0 - off
+ * 1 - short range, lowest power
+ * 2 - medium range, medium power
+ * 3 - maximum range, high power
+ *
+ * Currently, only assabet is known to support this.
+ */
+static int
+__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
+{
+ int ret = 0;
+ if (si->pdata->set_power)
+ ret = si->pdata->set_power(si->dev, state);
+ return ret;
+}
+
+static inline int
+sa1100_set_power(struct sa1100_irda *si, unsigned int state)
+{
+ int ret;
+
+ ret = __sa1100_irda_set_power(si, state);
+ if (ret == 0)
+ si->power = state;
+
+ return ret;
+}
+
+static int sa1100_irda_startup(struct sa1100_irda *si)
+{
+ int ret;
+
+ /*
+ * Ensure that the ports for this device are setup correctly.
+ */
+ if (si->pdata->startup)
+ si->pdata->startup(si->dev);
+
+ /*
+ * Configure PPC for IRDA - we want to drive TXD2 low.
+ * We also want to drive this pin low during sleep.
+ */
+ PPSR &= ~PPC_TXD2;
+ PSDR &= ~PPC_TXD2;
+ PPDR |= PPC_TXD2;
+
+ /*
+ * Enable HP-SIR modulation, and ensure that the port is disabled.
+ */
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = HSCR0_UART;
+ Ser2UTCR4 = si->utcr4;
+ Ser2UTCR0 = UTCR0_8BitData;
+ Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
+
+ /*
+ * Clear status register
+ */
+ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+
+ ret = sa1100_irda_set_speed(si, si->speed = 9600);
+ if (ret) {
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = 0;
+
+ if (si->pdata->shutdown)
+ si->pdata->shutdown(si->dev);
+ }
+
+ return ret;
+}
+
+static void sa1100_irda_shutdown(struct sa1100_irda *si)
+{
+ /*
+ * Stop all DMA activity.
+ */
+ sa1100_stop_dma(si->rxdma);
+ sa1100_stop_dma(si->txdma);
+
+ /* Disable the port. */
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = 0;
+
+ if (si->pdata->shutdown)
+ si->pdata->shutdown(si->dev);
+}
+
+#ifdef CONFIG_PM
+/*
+ * Suspend the IrDA interface.
+ */
+static int sa1100_irda_suspend(struct device *_dev, u32 state, u32 level)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+ struct sa1100_irda *si;
+
+ if (!dev || level != SUSPEND_DISABLE)
+ return 0;
+
+ si = dev->priv;
+ if (si->open) {
+ /*
+ * Stop the transmit queue
+ */
+ netif_device_detach(dev);
+ disable_irq(dev->irq);
+ sa1100_irda_shutdown(si);
+ __sa1100_irda_set_power(si, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * Resume the IrDA interface.
+ */
+static int sa1100_irda_resume(struct device *_dev, u32 level)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+ struct sa1100_irda *si;
+
+ if (!dev || level != RESUME_ENABLE)
+ return 0;
+
+ si = dev->priv;
+ if (si->open) {
+ /*
+ * If we missed a speed change, initialise at the new speed
+ * directly. It is debatable whether this is actually
+ * required, but in the interests of continuing from where
+ * we left off it is desireable. The converse argument is
+ * that we should re-negotiate at 9600 baud again.
+ */
+ if (si->newspeed) {
+ si->speed = si->newspeed;
+ si->newspeed = 0;
+ }
+
+ sa1100_irda_startup(si);
+ __sa1100_irda_set_power(si, si->power);
+ enable_irq(dev->irq);
+
+ /*
+ * This automatically wakes up the queue
+ */
+ netif_device_attach(dev);
+ }
+
+ return 0;
+}
+#else
+#define sa1100_irda_suspend NULL
+#define sa1100_irda_resume NULL
+#endif
+
+/*
+ * HP-SIR format interrupt service routines.
+ */
+static void sa1100_irda_hpsir_irq(struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+ int status;
+
+ status = Ser2UTSR0;
+
+ /*
+ * Deal with any receive errors first. The bytes in error may be
+ * the only bytes in the receive FIFO, so we do this first.
+ */
+ while (status & UTSR0_EIF) {
+ int stat, data;
+
+ stat = Ser2UTSR1;
+ data = Ser2UTDR;
+
+ if (stat & (UTSR1_FRE | UTSR1_ROR)) {
+ si->stats.rx_errors++;
+ if (stat & UTSR1_FRE)
+ si->stats.rx_frame_errors++;
+ if (stat & UTSR1_ROR)
+ si->stats.rx_fifo_errors++;
+ } else
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, data);
+
+ status = Ser2UTSR0;
+ }
+
+ /*
+ * We must clear certain bits.
+ */
+ Ser2UTSR0 = status & (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+
+ if (status & UTSR0_RFS) {
+ /*
+ * There are at least 4 bytes in the FIFO. Read 3 bytes
+ * and leave the rest to the block below.
+ */
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, Ser2UTDR);
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, Ser2UTDR);
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, Ser2UTDR);
+ }
+
+ if (status & (UTSR0_RFS | UTSR0_RID)) {
+ /*
+ * Fifo contains more than 1 character.
+ */
+ do {
+ async_unwrap_char(dev, &si->stats, &si->rx_buff,
+ Ser2UTDR);
+ } while (Ser2UTSR1 & UTSR1_RNE);
+
+ dev->last_rx = jiffies;
+ }
+
+ if (status & UTSR0_TFS && si->tx_buff.len) {
+ /*
+ * Transmitter FIFO is not full
+ */
+ do {
+ Ser2UTDR = *si->tx_buff.data++;
+ si->tx_buff.len -= 1;
+ } while (Ser2UTSR1 & UTSR1_TNF && si->tx_buff.len);
+
+ if (si->tx_buff.len == 0) {
+ si->stats.tx_packets++;
+ si->stats.tx_bytes += si->tx_buff.data -
+ si->tx_buff.head;
+
+ /*
+ * We need to ensure that the transmitter has
+ * finished.
+ */
+ do
+ rmb();
+ while (Ser2UTSR1 & UTSR1_TBY);
+
+ /*
+ * Ok, we've finished transmitting. Now enable
+ * the receiver. Sometimes we get a receive IRQ
+ * immediately after a transmit...
+ */
+ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+ Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+
+ if (si->newspeed) {
+ sa1100_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
+ }
+
+ /* I'm hungry! */
+ netif_wake_queue(dev);
+ }
+ }
+}
+
+static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev)
+{
+ struct sk_buff *skb = si->rxskb;
+ dma_addr_t dma_addr;
+ unsigned int len, stat, data;
+
+ if (!skb) {
+ printk(KERN_ERR "sa1100_ir: SKB is NULL!\n");
+ return;
+ }
+
+ /*
+ * Get the current data position.
+ */
+ dma_addr = sa1100_get_dma_pos(si->rxdma);
+ len = dma_addr - si->rxbuf_dma;
+ if (len > HPSIR_MAX_RXLEN)
+ len = HPSIR_MAX_RXLEN;
+ dma_unmap_single(si->dev, si->rxbuf_dma, len, DMA_FROM_DEVICE);
+
+ do {
+ /*
+ * Read Status, and then Data.
+ */
+ stat = Ser2HSSR1;
+ rmb();
+ data = Ser2HSDR;
+
+ if (stat & (HSSR1_CRE | HSSR1_ROR)) {
+ si->stats.rx_errors++;
+ if (stat & HSSR1_CRE)
+ si->stats.rx_crc_errors++;
+ if (stat & HSSR1_ROR)
+ si->stats.rx_frame_errors++;
+ } else
+ skb->data[len++] = data;
+
+ /*
+ * If we hit the end of frame, there's
+ * no point in continuing.
+ */
+ if (stat & HSSR1_EOF)
+ break;
+ } while (Ser2HSSR0 & HSSR0_EIF);
+
+ if (stat & HSSR1_EOF) {
+ si->rxskb = NULL;
+
+ skb_put(skb, len);
+ skb->dev = dev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ si->stats.rx_packets++;
+ si->stats.rx_bytes += len;
+
+ /*
+ * Before we pass the buffer up, allocate a new one.
+ */
+ sa1100_irda_rx_alloc(si);
+
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ } else {
+ /*
+ * Remap the buffer.
+ */
+ si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
+ HPSIR_MAX_RXLEN,
+ DMA_FROM_DEVICE);
+ }
+}
+
+/*
+ * FIR format interrupt service routine. We only have to
+ * handle RX events; transmit events go via the TX DMA handler.
+ *
+ * No matter what, we disable RX, process, and the restart RX.
+ */
+static void sa1100_irda_fir_irq(struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+
+ /*
+ * Stop RX DMA
+ */
+ sa1100_stop_dma(si->rxdma);
+
+ /*
+ * Framing error - we throw away the packet completely.
+ * Clearing RXE flushes the error conditions and data
+ * from the fifo.
+ */
+ if (Ser2HSSR0 & (HSSR0_FRE | HSSR0_RAB)) {
+ si->stats.rx_errors++;
+
+ if (Ser2HSSR0 & HSSR0_FRE)
+ si->stats.rx_frame_errors++;
+
+ /*
+ * Clear out the DMA...
+ */
+ Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+
+ /*
+ * Clear selected status bits now, so we
+ * don't miss them next time around.
+ */
+ Ser2HSSR0 = HSSR0_FRE | HSSR0_RAB;
+ }
+
+ /*
+ * Deal with any receive errors. The any of the lowest
+ * 8 bytes in the FIFO may contain an error. We must read
+ * them one by one. The "error" could even be the end of
+ * packet!
+ */
+ if (Ser2HSSR0 & HSSR0_EIF)
+ sa1100_irda_fir_error(si, dev);
+
+ /*
+ * No matter what happens, we must restart reception.
+ */
+ sa1100_irda_rx_dma_start(si);
+}
+
+static irqreturn_t sa1100_irda_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ if (IS_FIR(((struct sa1100_irda *)dev->priv)))
+ sa1100_irda_fir_irq(dev);
+ else
+ sa1100_irda_hpsir_irq(dev);
+ return IRQ_HANDLED;
+}
+
+/*
+ * TX DMA completion handler.
+ */
+static void sa1100_irda_txdma_irq(void *id)
+{
+ struct net_device *dev = id;
+ struct sa1100_irda *si = dev->priv;
+ struct sk_buff *skb = si->txskb;
+
+ si->txskb = NULL;
+
+ /*
+ * Wait for the transmission to complete. Unfortunately,
+ * the hardware doesn't give us an interrupt to indicate
+ * "end of frame".
+ */
+ do
+ rmb();
+ while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
+
+ /*
+ * Clear the transmit underrun bit.
+ */
+ Ser2HSSR0 = HSSR0_TUR;
+
+ /*
+ * Do we need to change speed? Note that we're lazy
+ * here - we don't free the old rxskb. We don't need
+ * to allocate a buffer either.
+ */
+ if (si->newspeed) {
+ sa1100_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
+ }
+
+ /*
+ * Start reception. This disables the transmitter for
+ * us. This will be using the existing RX buffer.
+ */
+ sa1100_irda_rx_dma_start(si);
+
+ /*
+ * Account and free the packet.
+ */
+ if (skb) {
+ dma_unmap_single(si->dev, si->txbuf_dma, skb->len, DMA_TO_DEVICE);
+ si->stats.tx_packets ++;
+ si->stats.tx_bytes += skb->len;
+ dev_kfree_skb_irq(skb);
+ }
+
+ /*
+ * Make sure that the TX queue is available for sending
+ * (for retries). TX has priority over RX at all times.
+ */
+ netif_wake_queue(dev);
+}
+
+static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+ int speed = irda_get_next_speed(skb);
+
+ /*
+ * Does this packet contain a request to change the interface
+ * speed? If so, remember it until we complete the transmission
+ * of this frame.
+ */
+ if (speed != si->speed && speed != -1)
+ si->newspeed = speed;
+
+ /*
+ * If this is an empty frame, we can bypass a lot.
+ */
+ if (skb->len == 0) {
+ if (si->newspeed) {
+ si->newspeed = 0;
+ sa1100_irda_set_speed(si, speed);
+ }
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ if (!IS_FIR(si)) {
+ netif_stop_queue(dev);
+
+ si->tx_buff.data = si->tx_buff.head;
+ si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data,
+ si->tx_buff.truesize);
+
+ /*
+ * Set the transmit interrupt enable. This will fire
+ * off an interrupt immediately. Note that we disable
+ * the receiver so we won't get spurious characteres
+ * received.
+ */
+ Ser2UTCR3 = UTCR3_TIE | UTCR3_TXE;
+
+ dev_kfree_skb(skb);
+ } else {
+ int mtt = irda_get_mtt(skb);
+
+ /*
+ * We must not be transmitting...
+ */
+ if (si->txskb)
+ BUG();
+
+ netif_stop_queue(dev);
+
+ si->txskb = skb;
+ si->txbuf_dma = dma_map_single(si->dev, skb->data,
+ skb->len, DMA_TO_DEVICE);
+
+ sa1100_start_dma(si->txdma, si->txbuf_dma, skb->len);
+
+ /*
+ * If we have a mean turn-around time, impose the specified
+ * specified delay. We could shorten this by timing from
+ * the point we received the packet.
+ */
+ if (mtt)
+ udelay(mtt);
+
+ Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_TXE;
+ }
+
+ dev->trans_start = jiffies;
+
+ return 0;
+}
+
+static int
+sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+ struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+ struct sa1100_irda *si = dev->priv;
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH:
+ if (capable(CAP_NET_ADMIN)) {
+ /*
+ * We are unable to set the speed if the
+ * device is not running.
+ */
+ if (si->open) {
+ ret = sa1100_irda_set_speed(si,
+ rq->ifr_baudrate);
+ } else {
+ printk("sa1100_irda_ioctl: SIOCSBANDWIDTH: !netif_running\n");
+ ret = 0;
+ }
+ }
+ break;
+
+ case SIOCSMEDIABUSY:
+ ret = -EPERM;
+ if (capable(CAP_NET_ADMIN)) {
+ irda_device_set_media_busy(dev, TRUE);
+ ret = 0;
+ }
+ break;
+
+ case SIOCGRECEIVING:
+ rq->ifr_receiving = IS_FIR(si) ? 0
+ : si->rx_buff.state != OUTSIDE_FRAME;
+ break;
+
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static struct net_device_stats *sa1100_irda_stats(struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+ return &si->stats;
+}
+
+static int sa1100_irda_start(struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+ int err;
+
+ si->speed = 9600;
+
+ err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
+ if (err)
+ goto err_irq;
+
+ err = sa1100_request_dma(DMA_Ser2HSSPRd, "IrDA receive",
+ NULL, NULL, &si->rxdma);
+ if (err)
+ goto err_rx_dma;
+
+ err = sa1100_request_dma(DMA_Ser2HSSPWr, "IrDA transmit",
+ sa1100_irda_txdma_irq, dev, &si->txdma);
+ if (err)
+ goto err_tx_dma;
+
+ /*
+ * The interrupt must remain disabled for now.
+ */
+ disable_irq(dev->irq);
+
+ /*
+ * Setup the serial port for the specified speed.
+ */
+ err = sa1100_irda_startup(si);
+ if (err)
+ goto err_startup;
+
+ /*
+ * Open a new IrLAP layer instance.
+ */
+ si->irlap = irlap_open(dev, &si->qos, "sa1100");
+ err = -ENOMEM;
+ if (!si->irlap)
+ goto err_irlap;
+
+ /*
+ * Now enable the interrupt and start the queue
+ */
+ si->open = 1;
+ sa1100_set_power(si, power_level); /* low power mode */
+ enable_irq(dev->irq);
+ netif_start_queue(dev);
+ return 0;
+
+err_irlap:
+ si->open = 0;
+ sa1100_irda_shutdown(si);
+err_startup:
+ sa1100_free_dma(si->txdma);
+err_tx_dma:
+ sa1100_free_dma(si->rxdma);
+err_rx_dma:
+ free_irq(dev->irq, dev);
+err_irq:
+ return err;
+}
+
+static int sa1100_irda_stop(struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+
+ disable_irq(dev->irq);
+ sa1100_irda_shutdown(si);
+
+ /*
+ * If we have been doing DMA receive, make sure we
+ * tidy that up cleanly.
+ */
+ if (si->rxskb) {
+ dma_unmap_single(si->dev, si->rxbuf_dma, HPSIR_MAX_RXLEN,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb(si->rxskb);
+ si->rxskb = NULL;
+ }
+
+ /* Stop IrLAP */
+ if (si->irlap) {
+ irlap_close(si->irlap);
+ si->irlap = NULL;
+ }
+
+ netif_stop_queue(dev);
+ si->open = 0;
+
+ /*
+ * Free resources
+ */
+ sa1100_free_dma(si->txdma);
+ sa1100_free_dma(si->rxdma);
+ free_irq(dev->irq, dev);
+
+ sa1100_set_power(si, 0);
+
+ return 0;
+}
+
+static int sa1100_irda_init_iobuf(iobuff_t *io, int size)
+{
+ io->head = kmalloc(size, GFP_KERNEL | GFP_DMA);
+ if (io->head != NULL) {
+ io->truesize = size;
+ io->in_frame = FALSE;
+ io->state = OUTSIDE_FRAME;
+ io->data = io->head;
+ }
+ return io->head ? 0 : -ENOMEM;
+}
+
+static int sa1100_irda_probe(struct device *_dev)
+{
+ struct platform_device *pdev = to_platform_device(_dev);
+ struct net_device *dev;
+ struct sa1100_irda *si;
+ unsigned int baudrate_mask;
+ int err;
+
+ if (!pdev->dev.platform_data)
+ return -EINVAL;
+
+ err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_1;
+ err = request_mem_region(__PREG(Ser2HSCR0), 0x1c, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_2;
+ err = request_mem_region(__PREG(Ser2HSCR2), 0x04, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_3;
+
+ dev = alloc_irdadev(sizeof(struct sa1100_irda));
+ if (!dev)
+ goto err_mem_4;
+
+ si = dev->priv;
+ si->dev = &pdev->dev;
+ si->pdata = pdev->dev.platform_data;
+
+ /*
+ * Initialise the HP-SIR buffers
+ */
+ err = sa1100_irda_init_iobuf(&si->rx_buff, 14384);
+ if (err)
+ goto err_mem_5;
+ err = sa1100_irda_init_iobuf(&si->tx_buff, 4000);
+ if (err)
+ goto err_mem_5;
+
+ dev->hard_start_xmit = sa1100_irda_hard_xmit;
+ dev->open = sa1100_irda_start;
+ dev->stop = sa1100_irda_stop;
+ dev->do_ioctl = sa1100_irda_ioctl;
+ dev->get_stats = sa1100_irda_stats;
+ dev->irq = IRQ_Ser2ICP;
+
+ irda_init_max_qos_capabilies(&si->qos);
+
+ /*
+ * We support original IRDA up to 115k2. (we don't currently
+ * support 4Mbps). Min Turn Time set to 1ms or greater.
+ */
+ baudrate_mask = IR_9600;
+
+ switch (max_rate) {
+ case 4000000: baudrate_mask |= IR_4000000 << 8;
+ case 115200: baudrate_mask |= IR_115200;
+ case 57600: baudrate_mask |= IR_57600;
+ case 38400: baudrate_mask |= IR_38400;
+ case 19200: baudrate_mask |= IR_19200;
+ }
+
+ si->qos.baud_rate.bits &= baudrate_mask;
+ si->qos.min_turn_time.bits = 7;
+
+ irda_qos_bits_to_value(&si->qos);
+
+ si->utcr4 = UTCR4_HPSIR;
+ if (tx_lpm)
+ si->utcr4 |= UTCR4_Z1_6us;
+
+ /*
+ * Initially enable HP-SIR modulation, and ensure that the port
+ * is disabled.
+ */
+ Ser2UTCR3 = 0;
+ Ser2UTCR4 = si->utcr4;
+ Ser2HSCR0 = HSCR0_UART;
+
+ err = register_netdev(dev);
+ if (err == 0)
+ dev_set_drvdata(&pdev->dev, dev);
+
+ if (err) {
+ err_mem_5:
+ kfree(si->tx_buff.head);
+ kfree(si->rx_buff.head);
+ free_netdev(dev);
+ err_mem_4:
+ release_mem_region(__PREG(Ser2HSCR2), 0x04);
+ err_mem_3:
+ release_mem_region(__PREG(Ser2HSCR0), 0x1c);
+ err_mem_2:
+ release_mem_region(__PREG(Ser2UTCR0), 0x24);
+ }
+ err_mem_1:
+ return err;
+}
+
+static int sa1100_irda_remove(struct device *_dev)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+
+ if (dev) {
+ struct sa1100_irda *si = dev->priv;
+ unregister_netdev(dev);
+ kfree(si->tx_buff.head);
+ kfree(si->rx_buff.head);
+ free_netdev(dev);
+ }
+
+ release_mem_region(__PREG(Ser2HSCR2), 0x04);
+ release_mem_region(__PREG(Ser2HSCR0), 0x1c);
+ release_mem_region(__PREG(Ser2UTCR0), 0x24);
+
+ return 0;
+}
+
+static struct device_driver sa1100ir_driver = {
+ .name = "sa11x0-ir",
+ .bus = &platform_bus_type,
+ .probe = sa1100_irda_probe,
+ .remove = sa1100_irda_remove,
+ .suspend = sa1100_irda_suspend,
+ .resume = sa1100_irda_resume,
+};
+
+static int __init sa1100_irda_init(void)
+{
+ /*
+ * Limit power level a sensible range.
+ */
+ if (power_level < 1)
+ power_level = 1;
+ if (power_level > 3)
+ power_level = 3;
+
+ return driver_register(&sa1100ir_driver);
+}
+
+static void __exit sa1100_irda_exit(void)
+{
+ driver_unregister(&sa1100ir_driver);
+}
+
+module_init(sa1100_irda_init);
+module_exit(sa1100_irda_exit);
+module_param(power_level, int, 0);
+module_param(tx_lpm, int, 0);
+module_param(max_rate, int, 0);
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("StrongARM SA1100 IrDA driver");
+MODULE_LICENSE("GPL");
+MODULE_PARM_DESC(power_level, "IrDA power level, 1 (low) to 3 (high)");
+MODULE_PARM_DESC(tx_lpm, "Enable transmitter low power (1.6us) mode");
+MODULE_PARM_DESC(max_rate, "Maximum baud rate (4000000, 115200, 57600, 38400, 19200, 9600)");