aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/irda
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/irda')
-rw-r--r--drivers/net/irda/Kconfig26
-rw-r--r--drivers/net/irda/Makefile2
-rw-r--r--drivers/net/irda/actisys-sir.c2
-rw-r--r--drivers/net/irda/ali-ircc.c4
-rw-r--r--drivers/net/irda/donauboe.c1
-rw-r--r--drivers/net/irda/irda-usb.c1
-rw-r--r--drivers/net/irda/irport.c2
-rw-r--r--drivers/net/irda/kingsun-sir.c2
-rw-r--r--drivers/net/irda/ks959-sir.c938
-rw-r--r--drivers/net/irda/ksdazzle-sir.c832
-rw-r--r--drivers/net/irda/mcs7780.c5
-rw-r--r--drivers/net/irda/nsc-ircc.c1
-rw-r--r--drivers/net/irda/sir_dev.c4
-rw-r--r--drivers/net/irda/smsc-ircc2.c4
-rw-r--r--drivers/net/irda/stir4200.c3
-rw-r--r--drivers/net/irda/via-ircc.c3
-rw-r--r--drivers/net/irda/vlsi_ir.c2
-rw-r--r--drivers/net/irda/vlsi_ir.h6
-rw-r--r--drivers/net/irda/w83977af_ir.c3
19 files changed, 1806 insertions, 35 deletions
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 2098d0af8ff..65806956728 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -162,7 +162,33 @@ config EP7211_DONGLE
Say Y here if you want to build support for the Cirrus logic
EP7211 chipset's infrared module.
+config KSDAZZLE_DONGLE
+ tristate "KingSun Dazzle IrDA-USB dongle (EXPERIMENTAL)"
+ depends on IRDA && USB && EXPERIMENTAL
+ help
+ Say Y or M here if you want to build support for the KingSun Dazzle
+ IrDA-USB bridge device driver.
+
+ This USB bridge does not conform to the IrDA-USB device class
+ specification, and therefore needs its own specific driver. This
+ dongle supports SIR speeds only (9600 through 115200 bps).
+
+ To compile it as a module, choose M here: the module will be called
+ ksdazzle-sir.
+config KS959_DONGLE
+ tristate "KingSun KS-959 IrDA-USB dongle (EXPERIMENTAL)"
+ depends on IRDA && USB && EXPERIMENTAL
+ help
+ Say Y or M here if you want to build support for the KingSun KS-959
+ IrDA-USB bridge device driver.
+
+ This USB bridge does not conform to the IrDA-USB device class
+ specification, and therefore needs its own specific driver. This
+ dongle supports SIR speeds only (9600 through 57600 bps).
+
+ To compile it as a module, choose M here: the module will be called
+ ks959-sir.
comment "Old SIR device drivers"
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 2808ef5c7b7..fefbb590908 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -47,6 +47,8 @@ obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o
obj-$(CONFIG_TOIM3232_DONGLE) += toim3232-sir.o
obj-$(CONFIG_EP7211_DONGLE) += ep7211-sir.o
obj-$(CONFIG_KINGSUN_DONGLE) += kingsun-sir.o
+obj-$(CONFIG_KSDAZZLE_DONGLE) += ksdazzle-sir.o
+obj-$(CONFIG_KS959_DONGLE) += ks959-sir.o
# The SIR helper module
sir-dev-objs := sir_dev.o sir_dongle.o
diff --git a/drivers/net/irda/actisys-sir.c b/drivers/net/irda/actisys-sir.c
index 9715ab5572e..ccf6ec548a6 100644
--- a/drivers/net/irda/actisys-sir.c
+++ b/drivers/net/irda/actisys-sir.c
@@ -67,7 +67,7 @@ static int actisys_reset(struct sir_dev *);
/* Note : the 220L doesn't support 38400, but we will fix that below */
static unsigned baud_rates[] = { 9600, 19200, 57600, 115200, 38400 };
-#define MAX_SPEEDS (sizeof(baud_rates)/sizeof(baud_rates[0]))
+#define MAX_SPEEDS ARRAY_SIZE(baud_rates)
static struct dongle_driver act220l = {
.owner = THIS_MODULE,
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index f9c889c0dd0..9f584521304 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -360,10 +360,6 @@ static int ali_ircc_open(int i, chipio_t *info)
self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
self->tx_fifo.tail = self->tx_buff.head;
-
- /* Keep track of module usage */
- SET_MODULE_OWNER(dev);
-
/* Override the network functions we need to use */
dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
dev->open = ali_ircc_net_open;
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 3ca47bf6dfe..3e5eca1aa98 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -1660,7 +1660,6 @@ toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid)
}
#endif
- SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pci_dev->dev);
dev->hard_start_xmit = toshoboe_hard_xmit;
dev->open = toshoboe_net_open;
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 3b0fd83fa26..c6355c00fd7 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1635,7 +1635,6 @@ static int irda_usb_probe(struct usb_interface *intf,
if (!net)
goto err_out;
- SET_MODULE_OWNER(net);
SET_NETDEV_DEV(net, &intf->dev);
self = net->priv;
self->netdev = net;
diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
index 20732458f5a..c79caa5d3d7 100644
--- a/drivers/net/irda/irport.c
+++ b/drivers/net/irda/irport.c
@@ -175,8 +175,6 @@ irport_open(int i, unsigned int iobase, unsigned int irq)
self->tx_buff.data = self->tx_buff.head;
self->netdev = dev;
- /* Keep track of module usage */
- SET_MODULE_OWNER(dev);
/* May be overridden by piggyback drivers */
self->interrupt = irport_interrupt;
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
index 4e5101a45c3..648e54b3f00 100644
--- a/drivers/net/irda/kingsun-sir.c
+++ b/drivers/net/irda/kingsun-sir.c
@@ -66,7 +66,6 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/module.h>
#include <linux/kref.h>
#include <linux/usb.h>
#include <linux/device.h>
@@ -488,7 +487,6 @@ static int kingsun_probe(struct usb_interface *intf,
if(!net)
goto err_out1;
- SET_MODULE_OWNER(net);
SET_NETDEV_DEV(net, &intf->dev);
kingsun = netdev_priv(net);
kingsun->irlap = NULL;
diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c
new file mode 100644
index 00000000000..8c257a51341
--- /dev/null
+++ b/drivers/net/irda/ks959-sir.c
@@ -0,0 +1,938 @@
+/*****************************************************************************
+*
+* Filename: ks959-sir.c
+* Version: 0.1.2
+* Description: Irda KingSun KS-959 USB Dongle
+* Status: Experimental
+* Author: Alex Villacís Lasso <a_villacis@palosanto.com>
+* with help from Domen Puncer <domen@coderock.org>
+*
+* Based on stir4200, mcs7780, kingsun-sir drivers.
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+*****************************************************************************/
+
+/*
+ * Following is my most current (2007-07-17) understanding of how the Kingsun
+ * KS-959 dongle is supposed to work. This information was deduced by
+ * reverse-engineering and examining the USB traffic captured with USBSnoopy
+ * from the WinXP driver. Feel free to update here as more of the dongle is
+ * known.
+ *
+ * My most sincere thanks must go to Domen Puncer <domen@coderock.org> for
+ * invaluable help in cracking the obfuscation and padding required for this
+ * dongle.
+ *
+ * General: This dongle exposes one interface with one interrupt IN endpoint.
+ * However, the interrupt endpoint is NOT used at all for this dongle. Instead,
+ * this dongle uses control transfers for everything, including sending and
+ * receiving the IrDA frame data. Apparently the interrupt endpoint is just a
+ * dummy to ensure the dongle has a valid interface to present to the PC.And I
+ * thought the DonShine dongle was weird... In addition, this dongle uses
+ * obfuscation (?!?!), applied at the USB level, to hide the traffic, both sent
+ * and received, from the dongle. I call it obfuscation because the XOR keying
+ * and padding required to produce an USB traffic acceptable for the dongle can
+ * not be explained by any other technical requirement.
+ *
+ * Transmission: To transmit an IrDA frame, the driver must prepare a control
+ * URB with the following as a setup packet:
+ * bRequestType USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE
+ * bRequest 0x09
+ * wValue <length of valid data before padding, little endian>
+ * wIndex 0x0000
+ * wLength <length of padded data>
+ * The payload packet must be manually wrapped and escaped (as in stir4200.c),
+ * then padded and obfuscated before being sent. Both padding and obfuscation
+ * are implemented in the procedure obfuscate_tx_buffer(). Suffice to say, the
+ * designer/programmer of the dongle used his name as a source for the
+ * obfuscation. WTF?!
+ * Apparently the dongle cannot handle payloads larger than 256 bytes. The
+ * driver has to perform fragmentation in order to send anything larger than
+ * this limit.
+ *
+ * Reception: To receive data, the driver must poll the dongle regularly (like
+ * kingsun-sir.c) with control URBs and the following as a setup packet:
+ * bRequestType USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE
+ * bRequest 0x01
+ * wValue 0x0200
+ * wIndex 0x0000
+ * wLength 0x0800 (size of available buffer)
+ * If there is data to be read, it will be returned as the response payload.
+ * This data is (apparently) not padded, but it is obfuscated. To de-obfuscate
+ * it, the driver must XOR every byte, in sequence, with a value that starts at
+ * 1 and is incremented with each byte processed, and then with 0x55. The value
+ * incremented with each byte processed overflows as an unsigned char. The
+ * resulting bytes form a wrapped SIR frame that is unwrapped and unescaped
+ * as in stir4200.c The incremented value is NOT reset with each frame, but is
+ * kept across the entire session with the dongle. Also, the dongle inserts an
+ * extra garbage byte with value 0x95 (after decoding) every 0xff bytes, which
+ * must be skipped.
+ *
+ * Speed change: To change the speed of the dongle, the driver prepares a
+ * control URB with the following as a setup packet:
+ * bRequestType USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE
+ * bRequest 0x09
+ * wValue 0x0200
+ * wIndex 0x0001
+ * wLength 0x0008 (length of the payload)
+ * The payload is a 8-byte record, apparently identical to the one used in
+ * drivers/usb/serial/cypress_m8.c to change speed:
+ * __u32 baudSpeed;
+ * unsigned int dataBits : 2; // 0 - 5 bits 3 - 8 bits
+ * unsigned int : 1;
+ * unsigned int stopBits : 1;
+ * unsigned int parityEnable : 1;
+ * unsigned int parityType : 1;
+ * unsigned int : 1;
+ * unsigned int reset : 1;
+ * unsigned char reserved[3]; // set to 0
+ *
+ * For now only SIR speeds have been observed with this dongle. Therefore,
+ * nothing is known on what changes (if any) must be done to frame wrapping /
+ * unwrapping for higher than SIR speeds. This driver assumes no change is
+ * necessary and announces support for all the way to 57600 bps. Although the
+ * package announces support for up to 4MBps, tests with a Sony Ericcson K300
+ * phone show corruption when receiving large frames at 115200 bps, the highest
+ * speed announced by the phone. However, transmission at 115200 bps is OK. Go
+ * figure. Since I don't know whether the phone or the dongle is at fault, max
+ * announced speed is 57600 bps until someone produces a device that can run
+ * at higher speeds with this dongle.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/crc32.h>
+
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/crc.h>
+
+#define KS959_VENDOR_ID 0x07d0
+#define KS959_PRODUCT_ID 0x4959
+
+/* These are the currently known USB ids */
+static struct usb_device_id dongles[] = {
+ /* KingSun Co,Ltd IrDA/USB Bridge */
+ {USB_DEVICE(KS959_VENDOR_ID, KS959_PRODUCT_ID)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, dongles);
+
+#define KINGSUN_MTT 0x07
+#define KINGSUN_REQ_RECV 0x01
+#define KINGSUN_REQ_SEND 0x09
+
+#define KINGSUN_RCV_FIFO_SIZE 2048 /* Max length we can receive */
+#define KINGSUN_SND_FIFO_SIZE 2048 /* Max packet we can send */
+#define KINGSUN_SND_PACKET_SIZE 256 /* Max packet dongle can handle */
+
+struct ks959_speedparams {
+ __le32 baudrate; /* baud rate, little endian */
+ __u8 flags;
+ __u8 reserved[3];
+} __attribute__ ((packed));
+
+#define KS_DATA_5_BITS 0x00
+#define KS_DATA_6_BITS 0x01
+#define KS_DATA_7_BITS 0x02
+#define KS_DATA_8_BITS 0x03
+
+#define KS_STOP_BITS_1 0x00
+#define KS_STOP_BITS_2 0x08
+
+#define KS_PAR_DISABLE 0x00
+#define KS_PAR_EVEN 0x10
+#define KS_PAR_ODD 0x30
+#define KS_RESET 0x80
+
+struct ks959_cb {
+ struct usb_device *usbdev; /* init: probe_irda */
+ struct net_device *netdev; /* network layer */
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct net_device_stats stats; /* network statistics */
+ struct qos_info qos;
+
+ struct usb_ctrlrequest *tx_setuprequest;
+ struct urb *tx_urb;
+ __u8 *tx_buf_clear;
+ unsigned int tx_buf_clear_used;
+ unsigned int tx_buf_clear_sent;
+ __u8 *tx_buf_xored;
+
+ struct usb_ctrlrequest *rx_setuprequest;
+ struct urb *rx_urb;
+ __u8 *rx_buf;
+ __u8 rx_variable_xormask;
+ iobuff_t rx_unwrap_buff;
+ struct timeval rx_time;
+
+ struct usb_ctrlrequest *speed_setuprequest;
+ struct urb *speed_urb;
+ struct ks959_speedparams speedparams;
+ unsigned int new_speed;
+
+ spinlock_t lock;
+ int receiving;
+};
+
+/* Procedure to perform the obfuscation/padding expected by the dongle
+ *
+ * buf_cleartext (IN) Cleartext version of the IrDA frame to transmit
+ * len_cleartext (IN) Length of the cleartext version of IrDA frame
+ * buf_xoredtext (OUT) Obfuscated version of frame built by proc
+ * len_maxbuf (OUT) Maximum space available at buf_xoredtext
+ *
+ * (return) length of obfuscated frame with padding
+ *
+ * If not enough space (as indicated by len_maxbuf vs. required padding),
+ * zero is returned
+ *
+ * The value of lookup_string is actually a required portion of the algorithm.
+ * Seems the designer of the dongle wanted to state who exactly is responsible
+ * for implementing obfuscation. Send your best (or other) wishes to him ]:-)
+ */
+static unsigned int obfuscate_tx_buffer(const __u8 * buf_cleartext,
+ unsigned int len_cleartext,
+ __u8 * buf_xoredtext,
+ unsigned int len_maxbuf)
+{
+ unsigned int len_xoredtext;
+
+ /* Calculate required length with padding, check for necessary space */
+ len_xoredtext = ((len_cleartext + 7) & ~0x7) + 0x10;
+ if (len_xoredtext <= len_maxbuf) {
+ static const __u8 lookup_string[] = "wangshuofei19710";
+ __u8 xor_mask;
+
+ /* Unlike the WinXP driver, we *do* clear out the padding */
+ memset(buf_xoredtext, 0, len_xoredtext);
+
+ xor_mask = lookup_string[(len_cleartext & 0x0f) ^ 0x06] ^ 0x55;
+
+ while (len_cleartext-- > 0) {
+ *buf_xoredtext++ = *buf_cleartext++ ^ xor_mask;
+ }
+ } else {
+ len_xoredtext = 0;
+ }
+ return len_xoredtext;
+}
+
+/* Callback transmission routine */
+static void ks959_speed_irq(struct urb *urb)
+{
+ /* unlink, shutdown, unplug, other nasties */
+ if (urb->status != 0) {
+ err("ks959_speed_irq: urb asynchronously failed - %d",
+ urb->status);
+ }
+}
+
+/* Send a control request to change speed of the dongle */
+static int ks959_change_speed(struct ks959_cb *kingsun, unsigned speed)
+{
+ static unsigned int supported_speeds[] = { 2400, 9600, 19200, 38400,
+ 57600, 115200, 576000, 1152000, 4000000, 0
+ };
+ int err;
+ unsigned int i;
+
+ if (kingsun->speed_setuprequest == NULL || kingsun->speed_urb == NULL)
+ return -ENOMEM;
+
+ /* Check that requested speed is among the supported ones */
+ for (i = 0; supported_speeds[i] && supported_speeds[i] != speed; i++) ;
+ if (supported_speeds[i] == 0)
+ return -EOPNOTSUPP;
+
+ memset(&(kingsun->speedparams), 0, sizeof(struct ks959_speedparams));
+ kingsun->speedparams.baudrate = cpu_to_le32(speed);
+ kingsun->speedparams.flags = KS_DATA_8_BITS;
+
+ /* speed_setuprequest pre-filled in ks959_probe */
+ usb_fill_control_urb(kingsun->speed_urb, kingsun->usbdev,
+ usb_sndctrlpipe(kingsun->usbdev, 0),
+ (unsigned char *)kingsun->speed_setuprequest,
+ &(kingsun->speedparams),
+ sizeof(struct ks959_speedparams), ks959_speed_irq,
+ kingsun);
+ kingsun->speed_urb->status = 0;
+ err = usb_submit_urb(kingsun->speed_urb, GFP_ATOMIC);
+
+ return err;
+}
+
+/* Submit one fragment of an IrDA frame to the dongle */
+static void ks959_send_irq(struct urb *urb);
+static int ks959_submit_tx_fragment(struct ks959_cb *kingsun)
+{
+ unsigned int padlen;
+ unsigned int wraplen;
+ int ret;
+
+ /* Check whether current plaintext can produce a padded buffer that fits
+ within the range handled by the dongle */
+ wraplen = (KINGSUN_SND_PACKET_SIZE & ~0x7) - 0x10;
+ if (wraplen > kingsun->tx_buf_clear_used)
+ wraplen = kingsun->tx_buf_clear_used;
+
+ /* Perform dongle obfuscation. Also remove the portion of the frame that
+ was just obfuscated and will now be sent to the dongle. */
+ padlen = obfuscate_tx_buffer(kingsun->tx_buf_clear, wraplen,
+ kingsun->tx_buf_xored,
+ KINGSUN_SND_PACKET_SIZE);
+
+ /* Calculate how much data can be transmitted in this urb */
+ kingsun->tx_setuprequest->wValue = cpu_to_le16(wraplen);
+ kingsun->tx_setuprequest->wLength = cpu_to_le16(padlen);
+ /* Rest of the fields were filled in ks959_probe */
+ usb_fill_control_urb(kingsun->tx_urb, kingsun->usbdev,
+ usb_sndctrlpipe(kingsun->usbdev, 0),
+ (unsigned char *)kingsun->tx_setuprequest,
+ kingsun->tx_buf_xored, padlen,
+ ks959_send_irq, kingsun);
+ kingsun->tx_urb->status = 0;
+ ret = usb_submit_urb(kingsun->tx_urb, GFP_ATOMIC);
+
+ /* Remember how much data was sent, in order to update at callback */
+ kingsun->tx_buf_clear_sent = (ret == 0) ? wraplen : 0;
+ return ret;
+}
+
+/* Callback transmission routine */
+static void ks959_send_irq(struct urb *urb)
+{
+ struct ks959_cb *kingsun = urb->context;
+ struct net_device *netdev = kingsun->netdev;
+ int ret = 0;
+
+ /* in process of stopping, just drop data */
+ if (!netif_running(kingsun->netdev)) {
+ err("ks959_send_irq: Network not running!");
+ return;
+ }
+
+ /* unlink, shutdown, unplug, other nasties */
+ if (urb->status != 0) {
+ err("ks959_send_irq: urb asynchronously failed - %d",
+ urb->status);
+ return;
+ }
+
+ if (kingsun->tx_buf_clear_used > 0) {
+ /* Update data remaining to be sent */
+ if (kingsun->tx_buf_clear_sent < kingsun->tx_buf_clear_used) {
+ memmove(kingsun->tx_buf_clear,
+ kingsun->tx_buf_clear +
+ kingsun->tx_buf_clear_sent,
+ kingsun->tx_buf_clear_used -
+ kingsun->tx_buf_clear_sent);
+ }
+ kingsun->tx_buf_clear_used -= kingsun->tx_buf_clear_sent;
+ kingsun->tx_buf_clear_sent = 0;
+
+ if (kingsun->tx_buf_clear_used > 0) {
+ /* There is more data to be sent */
+ if ((ret = ks959_submit_tx_fragment(kingsun)) != 0) {
+ err("ks959_send_irq: failed tx_urb submit: %d",
+ ret);
+ switch (ret) {
+ case -ENODEV:
+ case -EPIPE:
+ break;
+ default:
+ kingsun->stats.tx_errors++;
+ netif_start_queue(netdev);
+ }
+ }
+ } else {
+ /* All data sent, send next speed && wake network queue */
+ if (kingsun->new_speed != -1 &&
+ cpu_to_le32(kingsun->new_speed) !=
+ kingsun->speedparams.baudrate)
+ ks959_change_speed(kingsun, kingsun->new_speed);
+
+ netif_wake_queue(netdev);
+ }
+ }
+}
+
+/*
+ * Called from net/core when new frame is available.
+ */
+static int ks959_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct ks959_cb *kingsun;
+ unsigned int wraplen;
+ int ret = 0;
+
+ if (skb == NULL || netdev == NULL)
+ return -EINVAL;
+
+ netif_stop_queue(netdev);
+
+ /* the IRDA wrapping routines don't deal with non linear skb */
+ SKB_LINEAR_ASSERT(skb);
+
+ kingsun = netdev_priv(netdev);
+
+ spin_lock(&kingsun->lock);
+ kingsun->new_speed = irda_get_next_speed(skb);
+
+ /* Append data to the end of whatever data remains to be transmitted */
+ wraplen =
+ async_wrap_skb(skb, kingsun->tx_buf_clear, KINGSUN_SND_FIFO_SIZE);
+ kingsun->tx_buf_clear_used = wraplen;
+
+ if ((ret = ks959_submit_tx_fragment(kingsun)) != 0) {
+ err("ks959_hard_xmit: failed tx_urb submit: %d", ret);
+ switch (ret) {
+ case -ENODEV:
+ case -EPIPE:
+ break;
+ default:
+ kingsun->stats.tx_errors++;
+ netif_start_queue(netdev);
+ }
+ } else {
+ kingsun->stats.tx_packets++;
+ kingsun->stats.tx_bytes += skb->len;
+
+ }
+
+ dev_kfree_skb(skb);
+ spin_unlock(&kingsun->lock);
+
+ return ret;
+}
+
+/* Receive callback function */
+static void ks959_rcv_irq(struct urb *urb)
+{
+ struct ks959_cb *kingsun = urb->context;
+ int ret;
+
+ /* in process of stopping, just drop data */
+ if (!netif_running(kingsun->netdev)) {
+ kingsun->receiving = 0;
+ return;
+ }
+
+ /* unlink, shutdown, unplug, other nasties */
+ if (urb->status != 0) {
+ err("kingsun_rcv_irq: urb asynchronously failed - %d",
+ urb->status);
+ kingsun->receiving = 0;
+ return;
+ }
+
+ if (urb->actual_length > 0) {
+ __u8 *bytes = urb->transfer_buffer;
+ unsigned int i;
+
+ for (i = 0; i < urb->actual_length; i++) {
+ /* De-obfuscation implemented here: variable portion of
+ xormask is incremented, and then used with the encoded
+ byte for the XOR. The result of the operation is used
+ to unwrap the SIR frame. */
+ kingsun->rx_variable_xormask++;
+ bytes[i] =
+ bytes[i] ^ kingsun->rx_variable_xormask ^ 0x55u;
+
+ /* rx_variable_xormask doubles as an index counter so we
+ can skip the byte at 0xff (wrapped around to 0).
+ */
+ if (kingsun->rx_variable_xormask != 0) {
+ async_unwrap_char(kingsun->netdev,
+ &kingsun->stats,
+ &kingsun->rx_unwrap_buff,
+ bytes[i]);
+ }
+ }
+ kingsun->netdev->last_rx = jiffies;
+ do_gettimeofday(&kingsun->rx_time);
+ kingsun->receiving =
+ (kingsun->rx_unwrap_buff.state != OUTSIDE_FRAME) ? 1 : 0;
+ }
+
+ /* This urb has already been filled in kingsun_net_open. Setup
+ packet must be re-filled, but it is assumed that urb keeps the
+ pointer to the initial setup packet, as well as the payload buffer.
+ Setup packet is already pre-filled at ks959_probe.
+ */
+ urb->status = 0;
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+/*
+ * Function kingsun_net_open (dev)
+ *
+ * Network device is taken up. Usually this is done by "ifconfig irda0 up"
+ */
+static int ks959_net_open(struct net_device *netdev)
+{
+ struct ks959_cb *kingsun = netdev_priv(netdev);
+ int err = -ENOMEM;
+ char hwname[16];
+
+ /* At this point, urbs are NULL, and skb is NULL (see kingsun_probe) */
+ kingsun->receiving = 0;
+
+ /* Initialize for SIR to copy data directly into skb. */
+ kingsun->rx_unwrap_buff.in_frame = FALSE;
+ kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
+ kingsun->rx_unwrap_buff.truesize = IRDA_SKB_MAX_MTU;
+ kingsun->rx_unwrap_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
+ if (!kingsun->rx_unwrap_buff.skb)
+ goto free_mem;
+
+ skb_reserve(kingsun->rx_unwrap_buff.skb, 1);
+ kingsun->rx_unwrap_buff.head = kingsun->rx_unwrap_buff.skb->data;
+ do_gettimeofday(&kingsun->rx_time);
+
+ kingsun->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kingsun->rx_urb)
+ goto free_mem;
+
+ kingsun->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kingsun->tx_urb)
+ goto free_mem;
+
+ kingsun->speed_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kingsun->speed_urb)
+ goto free_mem;
+
+ /* Initialize speed for dongle */
+ kingsun->new_speed = 9600;
+ err = ks959_change_speed(kingsun, 9600);
+ if (err < 0)
+ goto free_mem;
+
+ /*
+ * Now that everything should be initialized properly,
+ * Open new IrLAP layer instance to take care of us...
+ */
+ sprintf(hwname, "usb#%d", kingsun->usbdev->devnum);
+ kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname);
+ if (!kingsun->irlap) {
+ err("ks959-sir: irlap_open failed");
+ goto free_mem;
+ }
+
+ /* Start reception. Setup request already pre-filled in ks959_probe */
+ usb_fill_control_urb(kingsun->rx_urb, kingsun->usbdev,
+ usb_rcvctrlpipe(kingsun->usbdev, 0),
+ (unsigned char *)kingsun->rx_setuprequest,
+ kingsun->rx_buf, KINGSUN_RCV_FIFO_SIZE,
+ ks959_rcv_irq, kingsun);
+ kingsun->rx_urb->status = 0;
+ err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
+ if (err) {
+ err("ks959-sir: first urb-submit failed: %d", err);
+ goto close_irlap;
+ }
+
+ netif_start_queue(netdev);
+
+ /* Situation at this point:
+ - all work buffers allocated
+ - urbs allocated and ready to fill
+ - max rx packet known (in max_rx)
+ - unwrap state machine initialized, in state outside of any frame
+ - receive request in progress
+ - IrLAP layer started, about to hand over packets to send
+ */
+
+ return 0;
+
+ close_irlap:
+ irlap_close(kingsun->irlap);
+ free_mem:
+ usb_free_urb(kingsun->speed_urb);
+ kingsun->speed_urb = NULL;
+ usb_free_urb(kingsun->tx_urb);
+ kingsun->tx_urb = NULL;
+ usb_free_urb(kingsun->rx_urb);
+ kingsun->rx_urb = NULL;
+ if (kingsun->rx_unwrap_buff.skb) {
+ kfree_skb(kingsun->rx_unwrap_buff.skb);
+ kingsun->rx_unwrap_buff.skb = NULL;
+ kingsun->rx_unwrap_buff.head = NULL;
+ }
+ return err;
+}
+
+/*
+ * Function kingsun_net_close (kingsun)
+ *
+ * Network device is taken down. Usually this is done by
+ * "ifconfig irda0 down"
+ */
+static int ks959_net_close(struct net_device *netdev)
+{
+ struct ks959_cb *kingsun = netdev_priv(netdev);
+
+ /* Stop transmit processing */
+ netif_stop_queue(netdev);
+
+ /* Mop up receive && transmit urb's */
+ usb_kill_urb(kingsun->tx_urb);
+ usb_free_urb(kingsun->tx_urb);
+ kingsun->tx_urb = NULL;
+
+ usb_kill_urb(kingsun->speed_urb);
+ usb_free_urb(kingsun->speed_urb);
+ kingsun->speed_urb = NULL;
+
+ usb_kill_urb(kingsun->rx_urb);
+ usb_free_urb(kingsun->rx_urb);
+ kingsun->rx_urb = NULL;
+
+ kfree_skb(kingsun->rx_unwrap_buff.skb);
+ kingsun->rx_unwrap_buff.skb = NULL;
+ kingsun->rx_unwrap_buff.head = NULL;
+ kingsun->rx_unwrap_buff.in_frame = FALSE;
+ kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
+ kingsun->receiving = 0;
+
+ /* Stop and remove instance of IrLAP */
+ if (kingsun->irlap)
+ irlap_close(kingsun->irlap);
+
+ kingsun->irlap = NULL;
+
+ return 0;
+}
+
+/*
+ * IOCTLs : Extra out-of-band network commands...
+ */
+static int ks959_net_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *)rq;
+ struct ks959_cb *kingsun = netdev_priv(netdev);
+ int ret = 0;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* Check if the device is still there */
+ if (netif_device_present(kingsun->netdev))
+ return ks959_change_speed(kingsun, irq->ifr_baudrate);
+ break;
+
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* Check if the IrDA stack is still there */
+ if (netif_running(kingsun->netdev))
+ irda_device_set_media_busy(kingsun->netdev, TRUE);
+ break;
+
+ case SIOCGRECEIVING:
+ /* Only approximately true */
+ irq->ifr_receiving = kingsun->receiving;
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/*
+ * Get device stats (for /proc/net/dev and ifconfig)
+ */
+static struct net_device_stats *ks959_net_get_stats(struct net_device *netdev)
+{
+ struct ks959_cb *kingsun = netdev_priv(netdev);
+ return &kingsun->stats;
+}
+
+/*
+ * This routine is called by the USB subsystem for each new device
+ * in the system. We need to check if the device is ours, and in
+ * this case start handling it.
+ */
+static int ks959_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct ks959_cb *kingsun = NULL;
+ struct net_device *net = NULL;
+ int ret = -ENOMEM;
+
+ /* Allocate network device container. */
+ net = alloc_irdadev(sizeof(*kingsun));
+ if (!net)
+ goto err_out1;
+
+ SET_NETDEV_DEV(net, &intf->dev);
+ kingsun = netdev_priv(net);
+ kingsun->netdev = net;
+ kingsun->usbdev = dev;
+ kingsun->irlap = NULL;
+ kingsun->tx_setuprequest = NULL;
+ kingsun->tx_urb = NULL;
+ kingsun->tx_buf_clear = NULL;
+ kingsun->tx_buf_xored = NULL;
+ kingsun->tx_buf_clear_used = 0;
+ kingsun->tx_buf_clear_sent = 0;
+
+ kingsun->rx_setuprequest = NULL;
+ kingsun->rx_urb = NULL;
+ kingsun->rx_buf = NULL;
+ kingsun->rx_variable_xormask = 0;
+ kingsun->rx_unwrap_buff.in_frame = FALSE;
+ kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
+ kingsun->rx_unwrap_buff.skb = NULL;
+ kingsun->receiving = 0;
+ spin_lock_init(&kingsun->lock);
+
+ kingsun->speed_setuprequest = NULL;
+ kingsun->speed_urb = NULL;
+ kingsun->speedparams.baudrate = 0;
+
+ /* Allocate input buffer */
+ kingsun->rx_buf = kmalloc(KINGSUN_RCV_FIFO_SIZE, GFP_KERNEL);
+ if (!kingsun->rx_buf)
+ goto free_mem;
+
+ /* Allocate input setup packet */
+ kingsun->rx_setuprequest =
+ kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!kingsun->rx_setuprequest)
+ goto free_mem;
+ kingsun->rx_setuprequest->bRequestType =
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ kingsun->rx_setuprequest->bRequest = KINGSUN_REQ_RECV;
+ kingsun->rx_setuprequest->wValue = cpu_to_le16(0x0200);
+ kingsun->rx_setuprequest->wIndex = 0;
+ kingsun->rx_setuprequest->wLength = cpu_to_le16(KINGSUN_RCV_FIFO_SIZE);
+
+ /* Allocate output buffer */
+ kingsun->tx_buf_clear = kmalloc(KINGSUN_SND_FIFO_SIZE, GFP_KERNEL);
+ if (!kingsun->tx_buf_clear)
+ goto free_mem;
+ kingsun->tx_buf_xored = kmalloc(KINGSUN_SND_PACKET_SIZE, GFP_KERNEL);
+ if (!kingsun->tx_buf_xored)
+ goto free_mem;
+
+ /* Allocate and initialize output setup packet */
+ kingsun->tx_setuprequest =
+ kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!kingsun->tx_setuprequest)
+ goto free_mem;
+ kingsun->tx_setuprequest->bRequestType =
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ kingsun->tx_setuprequest->bRequest = KINGSUN_REQ_SEND;
+ kingsun->tx_setuprequest->wValue = 0;
+ kingsun->tx_setuprequest->wIndex = 0;
+ kingsun->tx_setuprequest->wLength = 0;
+
+ /* Allocate and initialize speed setup packet */
+ kingsun->speed_setuprequest =
+ kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!kingsun->speed_setuprequest)
+ goto free_mem;
+ kingsun->speed_setuprequest->bRequestType =
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ kingsun->speed_setuprequest->bRequest = KINGSUN_REQ_SEND;
+ kingsun->speed_setuprequest->wValue = cpu_to_le16(0x0200);
+ kingsun->speed_setuprequest->wIndex = cpu_to_le16(0x0001);
+ kingsun->speed_setuprequest->wLength =
+ cpu_to_le16(sizeof(struct ks959_speedparams));
+
+ printk(KERN_INFO "KingSun KS-959 IRDA/USB found at address %d, "
+ "Vendor: %x, Product: %x\n",
+ dev->devnum, le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&kingsun->qos);
+
+ /* Baud rates known to be supported. Please uncomment if devices (other
+ than a SonyEriccson K300 phone) can be shown to support higher speed
+ with this dongle.
+ */
+ kingsun->qos.baud_rate.bits =
+ IR_2400 | IR_9600 | IR_19200 | IR_38400 | IR_57600;
+ kingsun->qos.min_turn_time.bits &= KINGSUN_MTT;
+ irda_qos_bits_to_value(&kingsun->qos);
+
+ /* Override the network functions we need to use */
+ net->hard_start_xmit = ks959_hard_xmit;
+ net->open = ks959_net_open;
+ net->stop = ks959_net_close;
+ net->get_stats = ks959_net_get_stats;
+ net->do_ioctl = ks959_net_ioctl;
+
+ ret = register_netdev(net);
+ if (ret != 0)
+ goto free_mem;
+
+ info("IrDA: Registered KingSun KS-959 device %s", net->name);
+
+ usb_set_intfdata(intf, kingsun);
+
+ /* Situation at this point:
+ - all work buffers allocated
+ - setup requests pre-filled
+ - urbs not allocated, set to NULL
+ - max rx packet known (is KINGSUN_FIFO_SIZE)
+ - unwrap state machine (partially) initialized, but skb == NULL
+ */
+
+ return 0;
+
+ free_mem:
+ kfree(kingsun->speed_setuprequest);
+ kfree(kingsun->tx_setuprequest);
+ kfree(kingsun->tx_buf_xored);
+ kfree(kingsun->tx_buf_clear);
+ kfree(kingsun->rx_setuprequest);
+ kfree(kingsun->rx_buf);
+ free_netdev(net);
+ err_out1:
+ return ret;
+}
+
+/*
+ * The current device is removed, the USB layer tell us to shut it down...
+ */
+static void ks959_disconnect(struct usb_interface *intf)
+{
+ struct ks959_cb *kingsun = usb_get_intfdata(intf);
+
+ if (!kingsun)
+ return;
+
+ unregister_netdev(kingsun->netdev);
+
+ /* Mop up receive && transmit urb's */
+ if (kingsun->speed_urb != NULL) {
+ usb_kill_urb(kingsun->speed_urb);
+ usb_free_urb(kingsun->speed_urb);
+ kingsun->speed_urb = NULL;
+ }
+ if (kingsun->tx_urb != NULL) {
+ usb_kill_urb(kingsun->tx_urb);
+ usb_free_urb(kingsun->tx_urb);
+ kingsun->tx_urb = NULL;
+ }
+ if (kingsun->rx_urb != NULL) {
+ usb_kill_urb(kingsun->rx_urb);
+ usb_free_urb(kingsun->rx_urb);
+ kingsun->rx_urb = NULL;
+ }
+
+ kfree(kingsun->speed_setuprequest);
+ kfree(kingsun->tx_setuprequest);
+ kfree(kingsun->tx_buf_xored);
+ kfree(kingsun->tx_buf_clear);
+ kfree(kingsun->rx_setuprequest);
+ kfree(kingsun->rx_buf);
+ free_netdev(kingsun->netdev);
+
+ usb_set_intfdata(intf, NULL);
+}
+
+#ifdef CONFIG_PM
+/* USB suspend, so power off the transmitter/receiver */
+static int ks959_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct ks959_cb *kingsun = usb_get_intfdata(intf);
+
+ netif_device_detach(kingsun->netdev);
+ if (kingsun->speed_urb != NULL)
+ usb_kill_urb(kingsun->speed_urb);
+ if (kingsun->tx_urb != NULL)
+ usb_kill_urb(kingsun->tx_urb);
+ if (kingsun->rx_urb != NULL)
+ usb_kill_urb(kingsun->rx_urb);
+ return 0;
+}
+
+/* Coming out of suspend, so reset hardware */
+static int ks959_resume(struct usb_interface *intf)
+{
+ struct ks959_cb *kingsun = usb_get_intfdata(intf);
+
+ if (kingsun->rx_urb != NULL) {
+ /* Setup request already filled in ks959_probe */
+ usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
+ }
+ netif_device_attach(kingsun->netdev);
+
+ return 0;
+}
+#endif
+
+/*
+ * USB device callbacks
+ */
+static struct usb_driver irda_driver = {
+ .name = "ks959-sir",
+ .probe = ks959_probe,
+ .disconnect = ks959_disconnect,
+ .id_table = dongles,
+#ifdef CONFIG_PM
+ .suspend = ks959_suspend,
+ .resume = ks959_resume,
+#endif
+};
+
+/*
+ * Module insertion
+ */
+static int __init ks959_init(void)
+{
+ return usb_register(&irda_driver);
+}
+
+module_init(ks959_init);
+
+/*
+ * Module removal
+ */
+static void __exit ks959_cleanup(void)
+{
+ /* Deregister the driver and remove all pending instances */
+ usb_deregister(&irda_driver);
+}
+
+module_exit(ks959_cleanup);
+
+MODULE_AUTHOR("Alex Villacís Lasso <a_villacis@palosanto.com>");
+MODULE_DESCRIPTION("IrDA-USB Dongle Driver for KingSun KS-959");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c
new file mode 100644
index 00000000000..d01a28593ce
--- /dev/null
+++ b/drivers/net/irda/ksdazzle-sir.c
@@ -0,0 +1,832 @@
+/*****************************************************************************
+*
+* Filename: ksdazzle.c
+* Version: 0.1.2
+* Description: Irda KingSun Dazzle USB Dongle
+* Status: Experimental
+* Author: Alex Villacís Lasso <a_villacis@palosanto.com>
+*
+* Based on stir4200, mcs7780, kingsun-sir drivers.
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+*****************************************************************************/
+
+/*
+ * Following is my most current (2007-07-26) understanding of how the Kingsun
+ * 07D0:4100 dongle (sometimes known as the MA-660) is supposed to work. This
+ * information was deduced by examining the USB traffic captured with USBSnoopy
+ * from the WinXP driver. Feel free to update here as more of the dongle is
+ * known.
+ *
+ * General: This dongle exposes one interface with two interrupt endpoints, one
+ * IN and one OUT. In this regard, it is similar to what the Kingsun/Donshine
+ * dongle (07c0:4200) exposes. Traffic is raw and needs to be wrapped and
+ * unwrapped manually as in stir4200, kingsun-sir, and ks959-sir.
+ *
+ * Transmission: To transmit an IrDA frame, it is necessary to wrap it, then
+ * split it into multiple segments of up to 7 bytes each, and transmit each in
+ * sequence. It seems that sending a single big block (like kingsun-sir does)
+ * won't work with this dongle. Each segment needs to be prefixed with a value
+ * equal to (unsigned char)0xF8 + <number of bytes in segment>, inside a payload
+ * of exactly 8 bytes. For example, a segment of 1 byte gets prefixed by 0xF9,
+ * and one of 7 bytes gets prefixed by 0xFF. The bytes at the end of the
+ * payload, not considered by the prefix, are ignored (set to 0 by this
+ * implementation).
+ *
+ * Reception: To receive data, the driver must poll the dongle regularly (like
+ * kingsun-sir.c) with interrupt URBs. If data is available, it will be returned
+ * in payloads from 0 to 8 bytes long. When concatenated, these payloads form
+ * a raw IrDA stream that needs to be unwrapped as in stir4200 and kingsun-sir
+ *
+ * Speed change: To change the speed of the dongle, the driver prepares a
+ * control URB with the following as a setup packet:
+ * bRequestType USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE
+ * bRequest 0x09
+ * wValue 0x0200
+ * wIndex 0x0001
+ * wLength 0x0008 (length of the payload)
+ * The payload is a 8-byte record, apparently identical to the one used in
+ * drivers/usb/serial/cypress_m8.c to change speed:
+ * __u32 baudSpeed;
+ * unsigned int dataBits : 2; // 0 - 5 bits 3 - 8 bits
+ * unsigned int : 1;
+ * unsigned int stopBits : 1;
+ * unsigned int parityEnable : 1;
+ * unsigned int parityType : 1;
+ * unsigned int : 1;
+ * unsigned int reset : 1;
+ * unsigned char reserved[3]; // set to 0
+ *
+ * For now only SIR speeds have been observed with this dongle. Therefore,
+ * nothing is known on what changes (if any) must be done to frame wrapping /
+ * unwrapping for higher than SIR speeds. This driver assumes no change is
+ * necessary and announces support for all the way to 115200 bps.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/crc32.h>
+
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/crc.h>
+
+#define KSDAZZLE_VENDOR_ID 0x07d0
+#define KSDAZZLE_PRODUCT_ID 0x4100
+
+/* These are the currently known USB ids */
+static struct usb_device_id dongles[] = {
+ /* KingSun Co,Ltd IrDA/USB Bridge */
+ {USB_DEVICE(KSDAZZLE_VENDOR_ID, KSDAZZLE_PRODUCT_ID)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, dongles);
+
+#define KINGSUN_MTT 0x07
+#define KINGSUN_REQ_RECV 0x01
+#define KINGSUN_REQ_SEND 0x09
+
+#define KINGSUN_SND_FIFO_SIZE 2048 /* Max packet we can send */
+#define KINGSUN_RCV_MAX 2048 /* Max transfer we can receive */
+
+struct ksdazzle_speedparams {
+ __le32 baudrate; /* baud rate, little endian */
+ __u8 flags;
+ __u8 reserved[3];
+} __attribute__ ((packed));
+
+#define KS_DATA_5_BITS 0x00
+#define KS_DATA_6_BITS 0x01
+#define KS_DATA_7_BITS 0x02
+#define KS_DATA_8_BITS 0x03
+
+#define KS_STOP_BITS_1 0x00
+#define KS_STOP_BITS_2 0x08
+
+#define KS_PAR_DISABLE 0x00
+#define KS_PAR_EVEN 0x10
+#define KS_PAR_ODD 0x30
+#define KS_RESET 0x80
+
+#define KINGSUN_EP_IN 0
+#define KINGSUN_EP_OUT 1
+
+struct ksdazzle_cb {
+ struct usb_device *usbdev; /* init: probe_irda */
+ struct net_device *netdev; /* network layer */
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct net_device_stats stats; /* network statistics */
+ struct qos_info qos;
+
+ struct urb *tx_urb;
+ __u8 *tx_buf_clear;
+ unsigned int tx_buf_clear_used;
+ unsigned int tx_buf_clear_sent;
+ __u8 tx_payload[8];
+
+ struct urb *rx_urb;
+ __u8 *rx_buf;
+ iobuff_t rx_unwrap_buff;
+
+ struct usb_ctrlrequest *speed_setuprequest;
+ struct urb *speed_urb;
+ struct ksdazzle_speedparams speedparams;
+ unsigned int new_speed;
+
+ __u8 ep_in;
+ __u8 ep_out;
+
+ spinlock_t lock;
+ int receiving;
+};
+
+/* Callback transmission routine */
+static void ksdazzle_speed_irq(struct urb *urb)
+{
+ /* unlink, shutdown, unplug, other nasties */
+ if (urb->status != 0) {
+ err("ksdazzle_speed_irq: urb asynchronously failed - %d",
+ urb->status);
+ }
+}
+
+/* Send a control request to change speed of the dongle */
+static int ksdazzle_change_speed(struct ksdazzle_cb *kingsun, unsigned speed)
+{
+ static unsigned int supported_speeds[] = { 2400, 9600, 19200, 38400,
+ 57600, 115200, 576000, 1152000, 4000000, 0
+ };
+ int err;
+ unsigned int i;
+
+ if (kingsun->speed_setuprequest == NULL || kingsun->speed_urb == NULL)
+ return -ENOMEM;
+
+ /* Check that requested speed is among the supported ones */
+ for (i = 0; supported_speeds[i] && supported_speeds[i] != speed; i++) ;
+ if (supported_speeds[i] == 0)
+ return -EOPNOTSUPP;
+
+ memset(&(kingsun->speedparams), 0, sizeof(struct ksdazzle_speedparams));
+ kingsun->speedparams.baudrate = cpu_to_le32(speed);
+ kingsun->speedparams.flags = KS_DATA_8_BITS;
+
+ /* speed_setuprequest pre-filled in ksdazzle_probe */
+ usb_fill_control_urb(kingsun->speed_urb, kingsun->usbdev,
+ usb_sndctrlpipe(kingsun->usbdev, 0),
+ (unsigned char *)kingsun->speed_setuprequest,
+ &(kingsun->speedparams),
+ sizeof(struct ksdazzle_speedparams),
+ ksdazzle_speed_irq, kingsun);
+ kingsun->speed_urb->status = 0;
+ err = usb_submit_urb(kingsun->speed_urb, GFP_ATOMIC);
+
+ return err;
+}
+
+/* Submit one fragment of an IrDA frame to the dongle */
+static void ksdazzle_send_irq(struct urb *urb);
+static int ksdazzle_submit_tx_fragment(struct ksdazzle_cb *kingsun)
+{
+ unsigned int wraplen;
+ int ret;
+
+ /* We can send at most 7 bytes of payload at a time */
+ wraplen = 7;
+ if (wraplen > kingsun->tx_buf_clear_used)
+ wraplen = kingsun->tx_buf_clear_used;
+
+ /* Prepare payload prefix with used length */
+ memset(kingsun->tx_payload, 0, 8);
+ kingsun->tx_payload[0] = (unsigned char)0xf8 + wraplen;
+ memcpy(kingsun->tx_payload + 1, kingsun->tx_buf_clear, wraplen);
+
+ usb_fill_int_urb(kingsun->tx_urb, kingsun->usbdev,
+ usb_sndintpipe(kingsun->usbdev, kingsun->ep_out),
+ kingsun->tx_payload, 8, ksdazzle_send_irq, kingsun, 1);
+ kingsun->tx_urb->status = 0;
+ ret = usb_submit_urb(kingsun->tx_urb, GFP_ATOMIC);
+
+ /* Remember how much data was sent, in order to update at callback */
+ kingsun->tx_buf_clear_sent = (ret == 0) ? wraplen : 0;
+ return ret;
+}
+
+/* Callback transmission routine */
+static void ksdazzle_send_irq(struct urb *urb)
+{
+ struct ksdazzle_cb *kingsun = urb->context;
+ struct net_device *netdev = kingsun->netdev;
+ int ret = 0;
+
+ /* in process of stopping, just drop data */
+ if (!netif_running(kingsun->netdev)) {
+ err("ksdazzle_send_irq: Network not running!");
+ return;
+ }
+
+ /* unlink, shutdown, unplug, other nasties */
+ if (urb->status != 0) {
+ err("ksdazzle_send_irq: urb asynchronously failed - %d",
+ urb->status);
+ return;
+ }
+
+ if (kingsun->tx_buf_clear_used > 0) {
+ /* Update data remaining to be sent */
+ if (kingsun->tx_buf_clear_sent < kingsun->tx_buf_clear_used) {
+ memmove(kingsun->tx_buf_clear,
+ kingsun->tx_buf_clear +
+ kingsun->tx_buf_clear_sent,
+ kingsun->tx_buf_clear_used -
+ kingsun->tx_buf_clear_sent);
+ }
+ kingsun->tx_buf_clear_used -= kingsun->tx_buf_clear_sent;
+ kingsun->tx_buf_clear_sent = 0;
+
+ if (kingsun->tx_buf_clear_used > 0) {
+ /* There is more data to be sent */
+ if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) {
+ err("ksdazzle_send_irq: failed tx_urb submit: %d", ret);
+ switch (ret) {
+ case -ENODEV:
+ case -EPIPE:
+ break;
+ default:
+ kingsun->stats.tx_errors++;
+ netif_start_queue(netdev);
+ }
+ }
+ } else {
+ /* All data sent, send next speed && wake network queue */
+ if (kingsun->new_speed != -1 &&
+ cpu_to_le32(kingsun->new_speed) !=
+ kingsun->speedparams.baudrate)
+ ksdazzle_change_speed(kingsun,
+ kingsun->new_speed);
+
+ netif_wake_queue(netdev);
+ }
+ }
+}
+
+/*
+ * Called from net/core when new frame is available.
+ */
+static int ksdazzle_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct ksdazzle_cb *kingsun;
+ unsigned int wraplen;
+ int ret = 0;
+
+ if (skb == NULL || netdev == NULL)
+ return -EINVAL;
+
+ netif_stop_queue(netdev);
+
+ /* the IRDA wrapping routines don't deal with non linear skb */
+ SKB_LINEAR_ASSERT(skb);
+
+ kingsun = netdev_priv(netdev);
+
+ spin_lock(&kingsun->lock);
+ kingsun->new_speed = irda_get_next_speed(skb);
+
+ /* Append data to the end of whatever data remains to be transmitted */
+ wraplen =
+ async_wrap_skb(skb, kingsun->tx_buf_clear, KINGSUN_SND_FIFO_SIZE);
+ kingsun->tx_buf_clear_used = wraplen;
+
+ if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) {
+ err("ksdazzle_hard_xmit: failed tx_urb submit: %d", ret);
+ switch (ret) {
+ case -ENODEV:
+ case -EPIPE:
+ break;
+ default:
+ kingsun->stats.tx_errors++;
+ netif_start_queue(netdev);
+ }
+ } else {
+ kingsun->stats.tx_packets++;
+ kingsun->stats.tx_bytes += skb->len;
+
+ }
+
+ dev_kfree_skb(skb);
+ spin_unlock(&kingsun->lock);
+
+ return ret;
+}
+
+/* Receive callback function */
+static void ksdazzle_rcv_irq(struct urb *urb)
+{
+ struct ksdazzle_cb *kingsun = urb->context;
+
+ /* in process of stopping, just drop data */
+ if (!netif_running(kingsun->netdev)) {
+ kingsun->receiving = 0;
+ return;
+ }
+
+ /* unlink, shutdown, unplug, other nasties */
+ if (urb->status != 0) {
+ err("ksdazzle_rcv_irq: urb asynchronously failed - %d",
+ urb->status);
+ kingsun->receiving = 0;
+ return;
+ }
+
+ if (urb->actual_length > 0) {
+ __u8 *bytes = urb->transfer_buffer;
+ unsigned int i;
+
+ for (i = 0; i < urb->actual_length; i++) {
+ async_unwrap_char(kingsun->netdev, &kingsun->stats,
+ &kingsun->rx_unwrap_buff, bytes[i]);
+ }
+ kingsun->netdev->last_rx = jiffies;
+ kingsun->receiving =
+ (kingsun->rx_unwrap_buff.state != OUTSIDE_FRAME) ? 1 : 0;
+ }
+
+ /* This urb has already been filled in ksdazzle_net_open. It is assumed that
+ urb keeps the pointer to the payload buffer.
+ */
+ urb->status = 0;
+ usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+/*
+ * Function ksdazzle_net_open (dev)
+ *
+ * Network device is taken up. Usually this is done by "ifconfig irda0 up"
+ */
+static int ksdazzle_net_open(struct net_device *netdev)
+{
+ struct ksdazzle_cb *kingsun = netdev_priv(netdev);
+ int err = -ENOMEM;
+ char hwname[16];
+
+ /* At this point, urbs are NULL, and skb is NULL (see ksdazzle_probe) */
+ kingsun->receiving = 0;
+
+ /* Initialize for SIR to copy data directly into skb. */
+ kingsun->rx_unwrap_buff.in_frame = FALSE;
+ kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
+ kingsun->rx_unwrap_buff.truesize = IRDA_SKB_MAX_MTU;
+ kingsun->rx_unwrap_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
+ if (!kingsun->rx_unwrap_buff.skb)
+ goto free_mem;
+
+ skb_reserve(kingsun->rx_unwrap_buff.skb, 1);
+ kingsun->rx_unwrap_buff.head = kingsun->rx_unwrap_buff.skb->data;
+
+ kingsun->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kingsun->rx_urb)
+ goto free_mem;
+
+ kingsun->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kingsun->tx_urb)
+ goto free_mem;
+
+ kingsun->speed_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kingsun->speed_urb)
+ goto free_mem;
+
+ /* Initialize speed for dongle */
+ kingsun->new_speed = 9600;
+ err = ksdazzle_change_speed(kingsun, 9600);
+ if (err < 0)
+ goto free_mem;
+
+ /*
+ * Now that everything should be initialized properly,
+ * Open new IrLAP layer instance to take care of us...
+ */
+ sprintf(hwname, "usb#%d", kingsun->usbdev->devnum);
+ kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname);
+ if (!kingsun->irlap) {
+ err("ksdazzle-sir: irlap_open failed");
+ goto free_mem;
+ }
+
+ /* Start reception. */
+ usb_fill_int_urb(kingsun->rx_urb, kingsun->usbdev,
+ usb_rcvintpipe(kingsun->usbdev, kingsun->ep_in),
+ kingsun->rx_buf, KINGSUN_RCV_MAX, ksdazzle_rcv_irq,
+ kingsun, 1);
+ kingsun->rx_urb->status = 0;
+ err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
+ if (err) {
+ err("ksdazzle-sir: first urb-submit failed: %d", err);
+ goto close_irlap;
+ }
+
+ netif_start_queue(netdev);
+
+ /* Situation at this point:
+ - all work buffers allocated
+ - urbs allocated and ready to fill
+ - max rx packet known (in max_rx)
+ - unwrap state machine initialized, in state outside of any frame
+ - receive request in progress
+ - IrLAP layer started, about to hand over packets to send
+ */
+
+ return 0;
+
+ close_irlap:
+ irlap_close(kingsun->irlap);
+ free_mem:
+ usb_free_urb(kingsun->speed_urb);
+ kingsun->speed_urb = NULL;
+ usb_free_urb(kingsun->tx_urb);
+ kingsun->tx_urb = NULL;
+ usb_free_urb(kingsun->rx_urb);
+ kingsun->rx_urb = NULL;
+ if (kingsun->rx_unwrap_buff.skb) {
+ kfree_skb(kingsun->rx_unwrap_buff.skb);
+ kingsun->rx_unwrap_buff.skb = NULL;
+ kingsun->rx_unwrap_buff.head = NULL;
+ }
+ return err;
+}
+
+/*
+ * Function ksdazzle_net_close (dev)
+ *
+ * Network device is taken down. Usually this is done by
+ * "ifconfig irda0 down"
+ */
+static int ksdazzle_net_close(struct net_device *netdev)
+{
+ struct ksdazzle_cb *kingsun = netdev_priv(netdev);
+
+ /* Stop transmit processing */
+ netif_stop_queue(netdev);
+
+ /* Mop up receive && transmit urb's */
+ usb_kill_urb(kingsun->tx_urb);
+ usb_free_urb(kingsun->tx_urb);
+ kingsun->tx_urb = NULL;
+
+ usb_kill_urb(kingsun->speed_urb);
+ usb_free_urb(kingsun->speed_urb);
+ kingsun->speed_urb = NULL;
+
+ usb_kill_urb(kingsun->rx_urb);
+ usb_free_urb(kingsun->rx_urb);
+ kingsun->rx_urb = NULL;
+
+ kfree_skb(kingsun->rx_unwrap_buff.skb);
+ kingsun->rx_unwrap_buff.skb = NULL;
+ kingsun->rx_unwrap_buff.head = NULL;
+ kingsun->rx_unwrap_buff.in_frame = FALSE;
+ kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
+ kingsun->receiving = 0;
+
+ /* Stop and remove instance of IrLAP */
+ irlap_close(kingsun->irlap);
+
+ kingsun->irlap = NULL;
+
+ return 0;
+}
+
+/*
+ * IOCTLs : Extra out-of-band network commands...
+ */
+static int ksdazzle_net_ioctl(struct net_device *netdev, struct ifreq *rq,
+ int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *)rq;
+ struct ksdazzle_cb *kingsun = netdev_priv(netdev);
+ int ret = 0;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* Check if the device is still there */
+ if (netif_device_present(kingsun->netdev))
+ return ksdazzle_change_speed(kingsun,
+ irq->ifr_baudrate);
+ break;
+
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* Check if the IrDA stack is still there */
+ if (netif_running(kingsun->netdev))
+ irda_device_set_media_busy(kingsun->netdev, TRUE);
+ break;
+
+ case SIOCGRECEIVING:
+ /* Only approximately true */
+ irq->ifr_receiving = kingsun->receiving;
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/*
+ * Get device stats (for /proc/net/dev and ifconfig)
+ */
+static struct net_device_stats *ksdazzle_net_get_stats(struct net_device
+ *netdev)
+{
+ struct ksdazzle_cb *kingsun = netdev_priv(netdev);
+ return &kingsun->stats;
+}
+
+/*
+ * This routine is called by the USB subsystem for each new device
+ * in the system. We need to check if the device is ours, and in
+ * this case start handling it.
+ */
+static int ksdazzle_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct ksdazzle_cb *kingsun = NULL;
+ struct net_device *net = NULL;
+ int ret = -ENOMEM;
+ int pipe, maxp_in, maxp_out;
+ __u8 ep_in;
+ __u8 ep_out;
+
+ /* Check that there really are two interrupt endpoints. Check based on the
+ one in drivers/usb/input/usbmouse.c
+ */
+ interface = intf->cur_altsetting;
+ if (interface->desc.bNumEndpoints != 2) {
+ err("ksdazzle: expected 2 endpoints, found %d",
+ interface->desc.bNumEndpoints);
+ return -ENODEV;
+ }
+ endpoint = &interface->endpoint[KINGSUN_EP_IN].desc;
+ if (!usb_endpoint_is_int_in(endpoint)) {
+ err("ksdazzle: endpoint 0 is not interrupt IN");
+ return -ENODEV;
+ }
+
+ ep_in = endpoint->bEndpointAddress;
+ pipe = usb_rcvintpipe(dev, ep_in);
+ maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+ if (maxp_in > 255 || maxp_in <= 1) {
+ err("ksdazzle: endpoint 0 has max packet size %d not in range [2..255]", maxp_in);
+ return -ENODEV;
+ }
+
+ endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc;
+ if (!usb_endpoint_is_int_out(endpoint)) {
+ err("ksdazzle: endpoint 1 is not interrupt OUT");
+ return -ENODEV;
+ }
+
+ ep_out = endpoint->bEndpointAddress;
+ pipe = usb_sndintpipe(dev, ep_out);
+ maxp_out = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+ /* Allocate network device container. */
+ net = alloc_irdadev(sizeof(*kingsun));
+ if (!net)
+ goto err_out1;
+
+ SET_NETDEV_DEV(net, &intf->dev);
+ kingsun = netdev_priv(net);
+ kingsun->netdev = net;
+ kingsun->usbdev = dev;
+ kingsun->ep_in = ep_in;
+ kingsun->ep_out = ep_out;
+ kingsun->irlap = NULL;
+ kingsun->tx_urb = NULL;
+ kingsun->tx_buf_clear = NULL;
+ kingsun->tx_buf_clear_used = 0;
+ kingsun->tx_buf_clear_sent = 0;
+
+ kingsun->rx_urb = NULL;
+ kingsun->rx_buf = NULL;
+ kingsun->rx_unwrap_buff.in_frame = FALSE;
+ kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
+ kingsun->rx_unwrap_buff.skb = NULL;
+ kingsun->receiving = 0;
+ spin_lock_init(&kingsun->lock);
+
+ kingsun->speed_setuprequest = NULL;
+ kingsun->speed_urb = NULL;
+ kingsun->speedparams.baudrate = 0;
+
+ /* Allocate input buffer */
+ kingsun->rx_buf = kmalloc(KINGSUN_RCV_MAX, GFP_KERNEL);
+ if (!kingsun->rx_buf)
+ goto free_mem;
+
+ /* Allocate output buffer */
+ kingsun->tx_buf_clear = kmalloc(KINGSUN_SND_FIFO_SIZE, GFP_KERNEL);
+ if (!kingsun->tx_buf_clear)
+ goto free_mem;
+
+ /* Allocate and initialize speed setup packet */
+ kingsun->speed_setuprequest =
+ kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!kingsun->speed_setuprequest)
+ goto free_mem;
+ kingsun->speed_setuprequest->bRequestType =
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ kingsun->speed_setuprequest->bRequest = KINGSUN_REQ_SEND;
+ kingsun->speed_setuprequest->wValue = cpu_to_le16(0x0200);
+ kingsun->speed_setuprequest->wIndex = cpu_to_le16(0x0001);
+ kingsun->speed_setuprequest->wLength =
+ cpu_to_le16(sizeof(struct ksdazzle_speedparams));
+
+ printk(KERN_INFO "KingSun/Dazzle IRDA/USB found at address %d, "
+ "Vendor: %x, Product: %x\n",
+ dev->devnum, le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&kingsun->qos);
+
+ /* Baud rates known to be supported. Please uncomment if devices (other
+ than a SonyEriccson K300 phone) can be shown to support higher speeds
+ with this dongle.
+ */
+ kingsun->qos.baud_rate.bits =
+ IR_2400 | IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200;
+ kingsun->qos.min_turn_time.bits &= KINGSUN_MTT;
+ irda_qos_bits_to_value(&kingsun->qos);
+
+ /* Override the network functions we need to use */
+ net->hard_start_xmit = ksdazzle_hard_xmit;
+ net->open = ksdazzle_net_open;
+ net->stop = ksdazzle_net_close;
+ net->get_stats = ksdazzle_net_get_stats;
+ net->do_ioctl = ksdazzle_net_ioctl;
+
+ ret = register_netdev(net);
+ if (ret != 0)
+ goto free_mem;
+
+ info("IrDA: Registered KingSun/Dazzle device %s", net->name);
+
+ usb_set_intfdata(intf, kingsun);
+
+ /* Situation at this point:
+ - all work buffers allocated
+ - setup requests pre-filled
+ - urbs not allocated, set to NULL
+ - max rx packet known (is KINGSUN_FIFO_SIZE)
+ - unwrap state machine (partially) initialized, but skb == NULL
+ */
+
+ return 0;
+
+ free_mem:
+ kfree(kingsun->speed_setuprequest);
+ kfree(kingsun->tx_buf_clear);
+ kfree(kingsun->rx_buf);
+ free_netdev(net);
+ err_out1:
+ return ret;
+}
+
+/*
+ * The current device is removed, the USB layer tell us to shut it down...
+ */
+static void ksdazzle_disconnect(struct usb_interface *intf)
+{
+ struct ksdazzle_cb *kingsun = usb_get_intfdata(intf);
+
+ if (!kingsun)
+ return;
+
+ unregister_netdev(kingsun->netdev);
+
+ /* Mop up receive && transmit urb's */
+ usb_kill_urb(kingsun->speed_urb);
+ usb_free_urb(kingsun->speed_urb);
+ kingsun->speed_urb = NULL;
+
+ usb_kill_urb(kingsun->tx_urb);
+ usb_free_urb(kingsun->tx_urb);
+ kingsun->tx_urb = NULL;
+
+ usb_kill_urb(kingsun->rx_urb);
+ usb_free_urb(kingsun->rx_urb);
+ kingsun->rx_urb = NULL;
+
+ kfree(kingsun->speed_setuprequest);
+ kfree(kingsun->tx_buf_clear);
+ kfree(kingsun->rx_buf);
+ free_netdev(kingsun->netdev);
+
+ usb_set_intfdata(intf, NULL);
+}
+
+#ifdef CONFIG_PM
+/* USB suspend, so power off the transmitter/receiver */
+static int ksdazzle_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct ksdazzle_cb *kingsun = usb_get_intfdata(intf);
+
+ netif_device_detach(kingsun->netdev);
+ if (kingsun->speed_urb != NULL)
+ usb_kill_urb(kingsun->speed_urb);
+ if (kingsun->tx_urb != NULL)
+ usb_kill_urb(kingsun->tx_urb);
+ if (kingsun->rx_urb != NULL)
+ usb_kill_urb(kingsun->rx_urb);
+ return 0;
+}
+
+/* Coming out of suspend, so reset hardware */
+static int ksdazzle_resume(struct usb_interface *intf)
+{
+ struct ksdazzle_cb *kingsun = usb_get_intfdata(intf);
+
+ if (kingsun->rx_urb != NULL) {
+ /* Setup request already filled in ksdazzle_probe */
+ usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
+ }
+ netif_device_attach(kingsun->netdev);
+
+ return 0;
+}
+#endif
+
+/*
+ * USB device callbacks
+ */
+static struct usb_driver irda_driver = {
+ .name = "ksdazzle-sir",
+ .probe = ksdazzle_probe,
+ .disconnect = ksdazzle_disconnect,
+ .id_table = dongles,
+#ifdef CONFIG_PM
+ .suspend = ksdazzle_suspend,
+ .resume = ksdazzle_resume,
+#endif
+};
+
+/*
+ * Module insertion
+ */
+static int __init ksdazzle_init(void)
+{
+ return usb_register(&irda_driver);
+}
+
+module_init(ksdazzle_init);
+
+/*
+ * Module removal
+ */
+static void __exit ksdazzle_cleanup(void)
+{
+ /* Deregister the driver and remove all pending instances */
+ usb_deregister(&irda_driver);
+}
+
+module_exit(ksdazzle_cleanup);
+
+MODULE_AUTHOR("Alex Villacís Lasso <a_villacis@palosanto.com>");
+MODULE_DESCRIPTION("IrDA-USB Dongle Driver for KingSun Dazzle");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index 0de867288a4..0b769192d4c 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -50,7 +50,6 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/module.h>
#include <linux/kref.h>
#include <linux/usb.h>
#include <linux/device.h>
@@ -465,7 +464,7 @@ static void mcs_unwrap_fir(struct mcs_cb *mcs, __u8 *buf, int len)
}
fcs = ~(crc32_le(~0, buf, new_len));
- if(fcs != le32_to_cpu(get_unaligned((u32 *)(buf+new_len)))) {
+ if(fcs != le32_to_cpu(get_unaligned((__le32 *)(buf+new_len)))) {
IRDA_ERROR("crc error calc 0x%x len %d\n", fcs, new_len);
mcs->stats.rx_errors++;
mcs->stats.rx_crc_errors++;
@@ -899,8 +898,6 @@ static int mcs_probe(struct usb_interface *intf,
IRDA_DEBUG(1, "MCS7780 USB-IrDA bridge found at %d.\n", udev->devnum);
- /* what is it realy for? */
- SET_MODULE_OWNER(ndev);
SET_NETDEV_DEV(ndev, &intf->dev);
ret = usb_reset_configuration(udev);
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index d96c89751a7..12b9378c587 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -437,7 +437,6 @@ static int __init nsc_ircc_open(chipio_t *info)
self->tx_fifo.tail = self->tx_buff.head;
/* Override the network functions we need to use */
- SET_MODULE_OWNER(dev);
dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
dev->open = nsc_ircc_net_open;
dev->stop = nsc_ircc_net_close;
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index 9d6c8f391b2..6078e03de9a 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -414,7 +414,7 @@ EXPORT_SYMBOL(sirdev_raw_read);
int sirdev_set_dtr_rts(struct sir_dev *dev, int dtr, int rts)
{
int ret = -ENXIO;
- if (dev->drv->set_dtr_rts != 0)
+ if (dev->drv->set_dtr_rts)
ret = dev->drv->set_dtr_rts(dev, dtr, rts);
return ret;
}
@@ -913,8 +913,6 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
dev->drv = drv;
dev->netdev = ndev;
- SET_MODULE_OWNER(ndev);
-
/* Override the network functions we need to use */
ndev->hard_start_xmit = sirdev_hard_xmit;
ndev->open = sirdev_open;
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 36ab98386be..7e7b5828214 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -81,7 +81,7 @@ MODULE_LICENSE("GPL");
static int smsc_nopnp = 1;
module_param_named(nopnp, smsc_nopnp, bool, 0);
-MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
+MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings, defaults to true");
#define DMA_INVAL 255
static int ircc_dma = DMA_INVAL;
@@ -519,8 +519,6 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u
goto err_out1;
}
- SET_MODULE_OWNER(dev);
-
dev->hard_start_xmit = smsc_ircc_hard_xmit_sir;
#if SMSC_IRCC2_C_NET_TIMEOUT
dev->tx_timeout = smsc_ircc_timeout;
diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
index 755aa444a4d..042bc2f0417 100644
--- a/drivers/net/irda/stir4200.c
+++ b/drivers/net/irda/stir4200.c
@@ -332,7 +332,7 @@ static void fir_eof(struct stir_cb *stir)
}
fcs = ~(crc32_le(~0, rx_buff->data, len));
- if (fcs != le32_to_cpu(get_unaligned((u32 *)(rx_buff->data+len)))) {
+ if (fcs != le32_to_cpu(get_unaligned((__le32 *)(rx_buff->data+len)))) {
pr_debug("crc error calc 0x%x len %d\n", fcs, len);
stir->stats.rx_errors++;
stir->stats.rx_crc_errors++;
@@ -1034,7 +1034,6 @@ static int stir_probe(struct usb_interface *intf,
if(!net)
goto err_out1;
- SET_MODULE_OWNER(net);
SET_NETDEV_DEV(net, &intf->dev);
stir = netdev_priv(net);
stir->netdev = net;
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index ff5358574d0..126ec7c8680 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -429,9 +429,6 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
self->tx_fifo.tail = self->tx_buff.head;
- /* Keep track of module usage */
- SET_MODULE_OWNER(dev);
-
/* Override the network functions we need to use */
dev->hard_start_xmit = via_ircc_hard_xmit_sir;
dev->open = via_ircc_net_open;
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index 0538ca9ce05..acd082a96a4 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -1584,8 +1584,6 @@ static int vlsi_irda_init(struct net_device *ndev)
vlsi_irda_dev_t *idev = ndev->priv;
struct pci_dev *pdev = idev->pdev;
- SET_MODULE_OWNER(ndev);
-
ndev->irq = pdev->irq;
ndev->base_addr = pci_resource_start(pdev,0);
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index ca12a609641..c8b9c74eea5 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -537,10 +537,10 @@ calc_width_bits(unsigned baudrate, unsigned widthselect, unsigned clockselect)
*/
struct ring_descr_hw {
- volatile u16 rd_count; /* tx/rx count [11:0] */
- u16 reserved;
+ volatile __le16 rd_count; /* tx/rx count [11:0] */
+ __le16 reserved;
union {
- u32 addr; /* [23:0] of the buffer's busaddress */
+ __le32 addr; /* [23:0] of the buffer's busaddress */
struct {
u8 addr_res[3];
volatile u8 status; /* descriptor status */
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index 5182e800cc1..9fd2451b0fb 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -232,9 +232,6 @@ int w83977af_open(int i, unsigned int iobase, unsigned int irq,
self->rx_buff.data = self->rx_buff.head;
self->netdev = dev;
- /* Keep track of module usage */
- SET_MODULE_OWNER(dev);
-
/* Override the network functions we need to use */
dev->hard_start_xmit = w83977af_hard_xmit;
dev->open = w83977af_net_open;