diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_common.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.c | 123 |
1 files changed, 112 insertions, 11 deletions
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 7fd6aeb1b02..a9f4d0e58e1 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -661,7 +661,7 @@ s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind, static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) { u32 i; - u32 rar_entries = hw->mac.num_rx_addrs; + u32 rar_entries = hw->mac.num_rar_entries; /* * If the current mac address is valid, assume it is a software override @@ -705,13 +705,114 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); hw_dbg(hw, " Clearing MTA\n"); - for (i = 0; i < IXGBE_MC_TBL_SIZE; i++) + for (i = 0; i < hw->mac.mcft_size; i++) IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); return 0; } /** + * ixgbe_add_uc_addr - Adds a secondary unicast address. + * @hw: pointer to hardware structure + * @addr: new address + * + * Adds it to unused receive address register or goes into promiscuous mode. + **/ +void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr) +{ + u32 rar_entries = hw->mac.num_rar_entries; + u32 rar; + + hw_dbg(hw, " UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); + + /* + * Place this address in the RAR if there is room, + * else put the controller into promiscuous mode + */ + if (hw->addr_ctrl.rar_used_count < rar_entries) { + rar = hw->addr_ctrl.rar_used_count - + hw->addr_ctrl.mc_addr_in_rar_count; + ixgbe_set_rar(hw, rar, addr, 0, IXGBE_RAH_AV); + hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar); + hw->addr_ctrl.rar_used_count++; + } else { + hw->addr_ctrl.overflow_promisc++; + } + + hw_dbg(hw, "ixgbe_add_uc_addr Complete\n"); +} + +/** + * ixgbe_update_uc_addr_list - Updates MAC list of secondary addresses + * @hw: pointer to hardware structure + * @addr_list: the list of new addresses + * @addr_count: number of addresses + * @next: iterator function to walk the address list + * + * The given list replaces any existing list. Clears the secondary addrs from + * receive address registers. Uses unused receive address registers for the + * first secondary addresses, and falls back to promiscuous mode as needed. + * + * Drivers using secondary unicast addresses must set user_set_promisc when + * manually putting the device into promiscuous mode. + **/ +s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, + u32 addr_count, ixgbe_mc_addr_itr next) +{ + u8 *addr; + u32 i; + u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc; + u32 uc_addr_in_use; + u32 fctrl; + u32 vmdq; + + /* + * Clear accounting of old secondary address list, + * don't count RAR[0] + */ + uc_addr_in_use = hw->addr_ctrl.rar_used_count - + hw->addr_ctrl.mc_addr_in_rar_count - 1; + hw->addr_ctrl.rar_used_count -= uc_addr_in_use; + hw->addr_ctrl.overflow_promisc = 0; + + /* Zero out the other receive addresses */ + hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use); + for (i = 1; i <= uc_addr_in_use; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); + } + + /* Add the new addresses */ + for (i = 0; i < addr_count; i++) { + hw_dbg(hw, " Adding the secondary addresses:\n"); + addr = next(hw, &addr_list, &vmdq); + ixgbe_add_uc_addr(hw, addr); + } + + if (hw->addr_ctrl.overflow_promisc) { + /* enable promisc if not already in overflow or set by user */ + if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { + hw_dbg(hw, " Entering address overflow promisc mode\n"); + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl |= IXGBE_FCTRL_UPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + } + } else { + /* only disable if set by overflow, not by user */ + if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { + hw_dbg(hw, " Leaving address overflow promisc mode\n"); + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl &= ~IXGBE_FCTRL_UPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + } + } + + hw_dbg(hw, "ixgbe_update_uc_addr_list Complete\n"); + return 0; +} + +/** * ixgbe_mta_vector - Determines bit-vector in multicast table to set * @hw: pointer to hardware structure * @mc_addr: the multicast address @@ -794,7 +895,7 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) **/ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) { - u32 rar_entries = hw->mac.num_rx_addrs; + u32 rar_entries = hw->mac.num_rar_entries; hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n", mc_addr[0], mc_addr[1], mc_addr[2], @@ -823,7 +924,7 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) * @hw: pointer to hardware structure * @mc_addr_list: the list of new multicast addresses * @mc_addr_count: number of addresses - * @pad: number of bytes between addresses in the list + * @next: iterator function to walk the multicast address list * * The given list replaces any existing list. Clears the MC addrs from receive * address registers and the multicast table. Uses unsed receive address @@ -831,10 +932,11 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) * multicast table. **/ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, u32 pad) + u32 mc_addr_count, ixgbe_mc_addr_itr next) { u32 i; - u32 rar_entries = hw->mac.num_rx_addrs; + u32 rar_entries = hw->mac.num_rar_entries; + u32 vmdq; /* * Set the new number of MC addresses that we are being requested to @@ -854,14 +956,13 @@ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, /* Clear the MTA */ hw_dbg(hw, " Clearing MTA\n"); - for (i = 0; i < IXGBE_MC_TBL_SIZE; i++) + for (i = 0; i < hw->mac.mcft_size; i++) IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); /* Add the new addresses */ for (i = 0; i < mc_addr_count; i++) { hw_dbg(hw, " Adding the multicast addresses:\n"); - ixgbe_add_mc_addr(hw, mc_addr_list + - (i * (IXGBE_ETH_LENGTH_OF_ADDRESS + pad))); + ixgbe_add_mc_addr(hw, next(hw, &mc_addr_list, &vmdq)); } /* Enable mta */ @@ -884,11 +985,11 @@ static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw) u32 offset; u32 vlanbyte; - for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++) + for (offset = 0; offset < hw->mac.vft_size; offset++) IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) - for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++) + for (offset = 0; offset < hw->mac.vft_size; offset++) IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), 0); |