aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/lp486e.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/lp486e.c')
-rw-r--r--drivers/net/lp486e.c1352
1 files changed, 1352 insertions, 0 deletions
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
new file mode 100644
index 00000000000..6139f06d7d2
--- /dev/null
+++ b/drivers/net/lp486e.c
@@ -0,0 +1,1352 @@
+/* Intel Professional Workstation/panther ethernet driver */
+/* lp486e.c: A panther 82596 ethernet driver for linux. */
+/*
+ History and copyrights:
+
+ Driver skeleton
+ Written 1993 by Donald Becker.
+ Copyright 1993 United States Government as represented by the Director,
+ National Security Agency. This software may only be used and
+ distributed according to the terms of the GNU General Public License
+ as modified by SRC, incorporated herein by reference.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ Apricot
+ Written 1994 by Mark Evans.
+ This driver is for the Apricot 82596 bus-master interface
+
+ Modularised 12/94 Mark Evans
+
+ Professional Workstation
+ Derived from apricot.c by Ard van Breemen
+ <ard@murphy.nl>|<ard@cstmel.hobby.nl>|<ard@cstmel.nl.eu.org>
+
+ Credits:
+ Thanks to Murphy Software BV for letting me write this in their time.
+ Well, actually, I get payed doing this...
+ (Also: see http://www.murphy.nl for murphy, and my homepage ~ard for
+ more information on the Professional Workstation)
+
+ Present version
+ aeb@cwi.nl
+*/
+/*
+ There are currently two motherboards that I know of in the
+ professional workstation. The only one that I know is the
+ intel panther motherboard. -- ard
+*/
+/*
+The pws is equipped with an intel 82596. This is a very intelligent controller
+which runs its own micro-code. Communication with the hostprocessor is done
+through linked lists of commands and buffers in the hostprocessors memory.
+A complete description of the 82596 is available from intel. Search for
+a file called "29021806.pdf". It is a complete description of the chip itself.
+To use it for the pws some additions are needed regarding generation of
+the PORT and CA signal, and the interrupt glue needed for a pc.
+I/O map:
+PORT SIZE ACTION MEANING
+0xCB0 2 WRITE Lower 16 bits for PORT command
+0xCB2 2 WRITE Upper 16 bits for PORT command, and issue of PORT command
+0xCB4 1 WRITE Generation of CA signal
+0xCB8 1 WRITE Clear interrupt glue
+All other communication is through memory!
+*/
+
+#define SLOW_DOWN_IO udelay(5)
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#define DRV_NAME "lp486e"
+
+/* debug print flags */
+#define LOG_SRCDST 0x80000000
+#define LOG_STATINT 0x40000000
+#define LOG_STARTINT 0x20000000
+
+#define i596_debug debug
+
+static int i596_debug = 0;
+
+static const char * const medianame[] = {
+ "10baseT", "AUI",
+ "10baseT-FD", "AUI-FD",
+};
+
+#define LP486E_TOTAL_SIZE 16
+
+#define I596_NULL (0xffffffff)
+
+#define CMD_EOL 0x8000 /* The last command of the list, stop. */
+#define CMD_SUSP 0x4000 /* Suspend after doing cmd. */
+#define CMD_INTR 0x2000 /* Interrupt after doing cmd. */
+
+#define CMD_FLEX 0x0008 /* Enable flexible memory model */
+
+enum commands {
+ CmdNOP = 0,
+ CmdIASetup = 1,
+ CmdConfigure = 2,
+ CmdMulticastList = 3,
+ CmdTx = 4,
+ CmdTDR = 5,
+ CmdDump = 6,
+ CmdDiagnose = 7
+};
+
+#if 0
+static const char *CUcmdnames[8] = { "NOP", "IASetup", "Configure", "MulticastList",
+ "Tx", "TDR", "Dump", "Diagnose" };
+#endif
+
+/* Status word bits */
+#define STAT_CX 0x8000 /* The CU finished executing a command
+ with the Interrupt bit set */
+#define STAT_FR 0x4000 /* The RU finished receiving a frame */
+#define STAT_CNA 0x2000 /* The CU left the active state */
+#define STAT_RNR 0x1000 /* The RU left the active state */
+#define STAT_ACK (STAT_CX | STAT_FR | STAT_CNA | STAT_RNR)
+#define STAT_CUS 0x0700 /* Status of CU: 0: idle, 1: suspended,
+ 2: active, 3-7: unused */
+#define STAT_RUS 0x00f0 /* Status of RU: 0: idle, 1: suspended,
+ 2: no resources, 4: ready,
+ 10: no resources due to no more RBDs,
+ 12: no more RBDs, other: unused */
+#define STAT_T 0x0008 /* Bus throttle timers loaded */
+#define STAT_ZERO 0x0807 /* Always zero */
+
+#if 0
+static char *CUstates[8] = {
+ "idle", "suspended", "active", 0, 0, 0, 0, 0
+};
+static char *RUstates[16] = {
+ "idle", "suspended", "no resources", 0, "ready", 0, 0, 0,
+ 0, 0, "no RBDs", 0, "out of RBDs", 0, 0, 0
+};
+
+static void
+i596_out_status(int status) {
+ int bad = 0;
+ char *s;
+
+ printk("status %4.4x:", status);
+ if (status == 0xffff)
+ printk(" strange..\n");
+ else {
+ if (status & STAT_CX)
+ printk(" CU done");
+ if (status & STAT_CNA)
+ printk(" CU stopped");
+ if (status & STAT_FR)
+ printk(" got a frame");
+ if (status & STAT_RNR)
+ printk(" RU stopped");
+ if (status & STAT_T)
+ printk(" throttled");
+ if (status & STAT_ZERO)
+ bad = 1;
+ s = CUstates[(status & STAT_CUS) >> 8];
+ if (!s)
+ bad = 1;
+ else
+ printk(" CU(%s)", s);
+ s = RUstates[(status & STAT_RUS) >> 4];
+ if (!s)
+ bad = 1;
+ else
+ printk(" RU(%s)", s);
+ if (bad)
+ printk(" bad status");
+ printk("\n");
+ }
+}
+#endif
+
+/* Command word bits */
+#define ACK_CX 0x8000
+#define ACK_FR 0x4000
+#define ACK_CNA 0x2000
+#define ACK_RNR 0x1000
+
+#define CUC_START 0x0100
+#define CUC_RESUME 0x0200
+#define CUC_SUSPEND 0x0300
+#define CUC_ABORT 0x0400
+
+#define RX_START 0x0010
+#define RX_RESUME 0x0020
+#define RX_SUSPEND 0x0030
+#define RX_ABORT 0x0040
+
+typedef u32 phys_addr;
+
+static inline phys_addr
+va_to_pa(void *x) {
+ return x ? virt_to_bus(x) : I596_NULL;
+}
+
+static inline void *
+pa_to_va(phys_addr x) {
+ return (x == I596_NULL) ? NULL : bus_to_virt(x);
+}
+
+/* status bits for cmd */
+#define CMD_STAT_C 0x8000 /* CU command complete */
+#define CMD_STAT_B 0x4000 /* CU command in progress */
+#define CMD_STAT_OK 0x2000 /* CU command completed without errors */
+#define CMD_STAT_A 0x1000 /* CU command abnormally terminated */
+
+struct i596_cmd { /* 8 bytes */
+ unsigned short status;
+ unsigned short command;
+ phys_addr pa_next; /* va_to_pa(struct i596_cmd *next) */
+};
+
+#define EOF 0x8000
+#define SIZE_MASK 0x3fff
+
+struct i596_tbd {
+ unsigned short size;
+ unsigned short pad;
+ phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */
+ phys_addr pa_data; /* va_to_pa(char *data) */
+ struct sk_buff *skb;
+};
+
+struct tx_cmd {
+ struct i596_cmd cmd;
+ phys_addr pa_tbd; /* va_to_pa(struct i596_tbd *tbd) */
+ unsigned short size;
+ unsigned short pad;
+};
+
+/* status bits for rfd */
+#define RFD_STAT_C 0x8000 /* Frame reception complete */
+#define RFD_STAT_B 0x4000 /* Frame reception in progress */
+#define RFD_STAT_OK 0x2000 /* Frame received without errors */
+#define RFD_STATUS 0x1fff
+#define RFD_LENGTH_ERR 0x1000
+#define RFD_CRC_ERR 0x0800
+#define RFD_ALIGN_ERR 0x0400
+#define RFD_NOBUFS_ERR 0x0200
+#define RFD_DMA_ERR 0x0100 /* DMA overrun failure to acquire system bus */
+#define RFD_SHORT_FRAME_ERR 0x0080
+#define RFD_NOEOP_ERR 0x0040
+#define RFD_TRUNC_ERR 0x0020
+#define RFD_MULTICAST 0x0002 /* 0: destination had our address
+ 1: destination was broadcast/multicast */
+#define RFD_COLLISION 0x0001
+
+/* receive frame descriptor */
+struct i596_rfd {
+ unsigned short stat;
+ unsigned short cmd;
+ phys_addr pa_next; /* va_to_pa(struct i596_rfd *next) */
+ phys_addr pa_rbd; /* va_to_pa(struct i596_rbd *rbd) */
+ unsigned short count;
+ unsigned short size;
+ char data[1532];
+};
+
+#define RBD_EL 0x8000
+#define RBD_P 0x4000
+#define RBD_SIZEMASK 0x3fff
+#define RBD_EOF 0x8000
+#define RBD_F 0x4000
+
+/* receive buffer descriptor */
+struct i596_rbd {
+ unsigned short size;
+ unsigned short pad;
+ phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */
+ phys_addr pa_data; /* va_to_pa(char *data) */
+ phys_addr pa_prev; /* va_to_pa(struct i596_tbd *prev) */
+
+ /* Driver private part */
+ struct sk_buff *skb;
+};
+
+#define RX_RING_SIZE 64
+#define RX_SKBSIZE (ETH_FRAME_LEN+10)
+#define RX_RBD_SIZE 32
+
+/* System Control Block - 40 bytes */
+struct i596_scb {
+ u16 status; /* 0 */
+ u16 command; /* 2 */
+ phys_addr pa_cmd; /* 4 - va_to_pa(struct i596_cmd *cmd) */
+ phys_addr pa_rfd; /* 8 - va_to_pa(struct i596_rfd *rfd) */
+ u32 crc_err; /* 12 */
+ u32 align_err; /* 16 */
+ u32 resource_err; /* 20 */
+ u32 over_err; /* 24 */
+ u32 rcvdt_err; /* 28 */
+ u32 short_err; /* 32 */
+ u16 t_on; /* 36 */
+ u16 t_off; /* 38 */
+};
+
+/* Intermediate System Configuration Pointer - 8 bytes */
+struct i596_iscp {
+ u32 busy; /* 0 */
+ phys_addr pa_scb; /* 4 - va_to_pa(struct i596_scb *scb) */
+};
+
+/* System Configuration Pointer - 12 bytes */
+struct i596_scp {
+ u32 sysbus; /* 0 */
+ u32 pad; /* 4 */
+ phys_addr pa_iscp; /* 8 - va_to_pa(struct i596_iscp *iscp) */
+};
+
+/* Selftest and dump results - needs 16-byte alignment */
+/*
+ * The size of the dump area is 304 bytes. When the dump is executed
+ * by the Port command an extra word will be appended to the dump area.
+ * The extra word is a copy of the Dump status word (containing the
+ * C, B, OK bits). [I find 0xa006, with a0 for C+OK and 6 for dump]
+ */
+struct i596_dump {
+ u16 dump[153]; /* (304 = 130h) + 2 bytes */
+};
+
+struct i596_private { /* aligned to a 16-byte boundary */
+ struct i596_scp scp; /* 0 - needs 16-byte alignment */
+ struct i596_iscp iscp; /* 12 */
+ struct i596_scb scb; /* 20 */
+ u32 dummy; /* 60 */
+ struct i596_dump dump; /* 64 - needs 16-byte alignment */
+
+ struct i596_cmd set_add;
+ char eth_addr[8]; /* directly follows set_add */
+
+ struct i596_cmd set_conf;
+ char i596_config[16]; /* directly follows set_conf */
+
+ struct i596_cmd tdr;
+ unsigned long tdr_stat; /* directly follows tdr */
+
+ int last_restart;
+ struct i596_rbd *rbd_list;
+ struct i596_rbd *rbd_tail;
+ struct i596_rfd *rx_tail;
+ struct i596_cmd *cmd_tail;
+ struct i596_cmd *cmd_head;
+ int cmd_backlog;
+ unsigned long last_cmd;
+ struct net_device_stats stats;
+ spinlock_t cmd_lock;
+};
+
+static char init_setup[14] = {
+ 0x8E, /* length 14 bytes, prefetch on */
+ 0xC8, /* default: fifo to 8, monitor off */
+ 0x40, /* default: don't save bad frames (apricot.c had 0x80) */
+ 0x2E, /* (default is 0x26)
+ No source address insertion, 8 byte preamble */
+ 0x00, /* default priority and backoff */
+ 0x60, /* default interframe spacing */
+ 0x00, /* default slot time LSB */
+ 0xf2, /* default slot time and nr of retries */
+ 0x00, /* default various bits
+ (0: promiscuous mode, 1: broadcast disable,
+ 2: encoding mode, 3: transmit on no CRS,
+ 4: no CRC insertion, 5: CRC type,
+ 6: bit stuffing, 7: padding) */
+ 0x00, /* default carrier sense and collision detect */
+ 0x40, /* default minimum frame length */
+ 0xff, /* (default is 0xff, and that is what apricot.c has;
+ elp486.c has 0xfb: Enable crc append in memory.) */
+ 0x00, /* default: not full duplex */
+ 0x7f /* (default is 0x3f) multi IA */
+};
+
+static int i596_open(struct net_device *dev);
+static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t i596_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static int i596_close(struct net_device *dev);
+static struct net_device_stats *i596_get_stats(struct net_device *dev);
+static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
+static void print_eth(char *);
+static void set_multicast_list(struct net_device *dev);
+static void i596_tx_timeout(struct net_device *dev);
+
+static int
+i596_timeout(struct net_device *dev, char *msg, int ct) {
+ struct i596_private *lp;
+ int boguscnt = ct;
+
+ lp = (struct i596_private *) dev->priv;
+ while (lp->scb.command) {
+ if (--boguscnt == 0) {
+ printk("%s: %s timed out - stat %4.4x, cmd %4.4x\n",
+ dev->name, msg,
+ lp->scb.status, lp->scb.command);
+ return 1;
+ }
+ udelay(5);
+ barrier();
+ }
+ return 0;
+}
+
+static inline int
+init_rx_bufs(struct net_device *dev, int num) {
+ struct i596_private *lp;
+ struct i596_rfd *rfd;
+ int i;
+ // struct i596_rbd *rbd;
+
+ lp = (struct i596_private *) dev->priv;
+ lp->scb.pa_rfd = I596_NULL;
+
+ for (i = 0; i < num; i++) {
+ rfd = kmalloc(sizeof(struct i596_rfd), GFP_KERNEL);
+ if (rfd == NULL)
+ break;
+
+ rfd->stat = 0;
+ rfd->pa_rbd = I596_NULL;
+ rfd->count = 0;
+ rfd->size = 1532;
+ if (i == 0) {
+ rfd->cmd = CMD_EOL;
+ lp->rx_tail = rfd;
+ } else {
+ rfd->cmd = 0;
+ }
+ rfd->pa_next = lp->scb.pa_rfd;
+ lp->scb.pa_rfd = va_to_pa(rfd);
+ lp->rx_tail->pa_next = lp->scb.pa_rfd;
+ }
+
+#if 0
+ for (i = 0; i<RX_RBD_SIZE; i++) {
+ rbd = kmalloc(sizeof(struct i596_rbd), GFP_KERNEL);
+ if (rbd) {
+ rbd->pad = 0;
+ rbd->count = 0;
+ rbd->skb = dev_alloc_skb(RX_SKB_SIZE);
+ if (!rbd->skb) {
+ printk("dev_alloc_skb failed");
+ }
+ rbd->next = rfd->rbd;
+ if (i) {
+ rfd->rbd->prev = rbd;
+ rbd->size = RX_SKB_SIZE;
+ } else {
+ rbd->size = (RX_SKB_SIZE | RBD_EL);
+ lp->rbd_tail = rbd;
+ }
+
+ rfd->rbd = rbd;
+ } else {
+ printk("Could not kmalloc rbd\n");
+ }
+ }
+ lp->rbd_tail->next = rfd->rbd;
+#endif
+ return (i);
+}
+
+static inline void
+remove_rx_bufs(struct net_device *dev) {
+ struct i596_private *lp;
+ struct i596_rfd *rfd;
+
+ lp = (struct i596_private *) dev->priv;
+ lp->rx_tail->pa_next = I596_NULL;
+
+ do {
+ rfd = pa_to_va(lp->scb.pa_rfd);
+ lp->scb.pa_rfd = rfd->pa_next;
+ kfree(rfd);
+ } while (rfd != lp->rx_tail);
+
+ lp->rx_tail = NULL;
+
+#if 0
+ for (lp->rbd_list) {
+ }
+#endif
+}
+
+#define PORT_RESET 0x00 /* reset 82596 */
+#define PORT_SELFTEST 0x01 /* selftest */
+#define PORT_ALTSCP 0x02 /* alternate SCB address */
+#define PORT_DUMP 0x03 /* dump */
+
+#define IOADDR 0xcb0 /* real constant */
+#define IRQ 10 /* default IRQ - can be changed by ECU */
+
+/* The 82596 requires two 16-bit write cycles for a port command */
+static inline void
+PORT(phys_addr a, unsigned int cmd) {
+ if (a & 0xf)
+ printk("lp486e.c: PORT: address not aligned\n");
+ outw(((a & 0xffff) | cmd), IOADDR);
+ outw(((a>>16) & 0xffff), IOADDR+2);
+}
+
+static inline void
+CA(void) {
+ outb(0, IOADDR+4);
+ udelay(8);
+}
+
+static inline void
+CLEAR_INT(void) {
+ outb(0, IOADDR+8);
+}
+
+#define SIZE(x) (sizeof(x)/sizeof((x)[0]))
+
+#if 0
+/* selftest or dump */
+static void
+i596_port_do(struct net_device *dev, int portcmd, char *cmdname) {
+ struct i596_private *lp = dev->priv;
+ u16 *outp;
+ int i, m;
+
+ memset((void *)&(lp->dump), 0, sizeof(struct i596_dump));
+ outp = &(lp->dump.dump[0]);
+
+ PORT(va_to_pa(outp), portcmd);
+ mdelay(30); /* random, unmotivated */
+
+ printk("lp486e i82596 %s result:\n", cmdname);
+ for (m = SIZE(lp->dump.dump); m && lp->dump.dump[m-1] == 0; m--)
+ ;
+ for (i = 0; i < m; i++) {
+ printk(" %04x", lp->dump.dump[i]);
+ if (i%8 == 7)
+ printk("\n");
+ }
+ printk("\n");
+}
+#endif
+
+static int
+i596_scp_setup(struct net_device *dev) {
+ struct i596_private *lp = dev->priv;
+ int boguscnt;
+
+ /* Setup SCP, ISCP, SCB */
+ /*
+ * sysbus bits:
+ * only a single byte is significant - here 0x44
+ * 0x80: big endian mode (details depend on stepping)
+ * 0x40: 1
+ * 0x20: interrupt pin is active low
+ * 0x10: lock function disabled
+ * 0x08: external triggering of bus throttle timers
+ * 0x06: 00: 82586 compat mode, 01: segmented mode, 10: linear mode
+ * 0x01: unused
+ */
+ lp->scp.sysbus = 0x00440000; /* linear mode */
+ lp->scp.pad = 0; /* must be zero */
+ lp->scp.pa_iscp = va_to_pa(&(lp->iscp));
+
+ /*
+ * The CPU sets the ISCP to 1 before it gives the first CA()
+ */
+ lp->iscp.busy = 0x0001;
+ lp->iscp.pa_scb = va_to_pa(&(lp->scb));
+
+ lp->scb.command = 0;
+ lp->scb.status = 0;
+ lp->scb.pa_cmd = I596_NULL;
+ /* lp->scb.pa_rfd has been initialised already */
+
+ lp->last_cmd = jiffies;
+ lp->cmd_backlog = 0;
+ lp->cmd_head = NULL;
+
+ /*
+ * Reset the 82596.
+ * We need to wait 10 systemclock cycles, and
+ * 5 serial clock cycles.
+ */
+ PORT(0, PORT_RESET); /* address part ignored */
+ udelay(100);
+
+ /*
+ * Before the CA signal is asserted, the default SCP address
+ * (0x00fffff4) can be changed to a 16-byte aligned value
+ */
+ PORT(va_to_pa(&lp->scp), PORT_ALTSCP); /* change the scp address */
+
+ /*
+ * The initialization procedure begins when a
+ * Channel Attention signal is asserted after a reset.
+ */
+
+ CA();
+
+ /*
+ * The ISCP busy is cleared by the 82596 after the SCB address is read.
+ */
+ boguscnt = 100;
+ while (lp->iscp.busy) {
+ if (--boguscnt == 0) {
+ /* No i82596 present? */
+ printk("%s: i82596 initialization timed out\n",
+ dev->name);
+ return 1;
+ }
+ udelay(5);
+ barrier();
+ }
+ /* I find here boguscnt==100, so no delay was required. */
+
+ return 0;
+}
+
+static int
+init_i596(struct net_device *dev) {
+ struct i596_private *lp;
+
+ if (i596_scp_setup(dev))
+ return 1;
+
+ lp = (struct i596_private *) dev->priv;
+ lp->scb.command = 0;
+
+ memcpy ((void *)lp->i596_config, init_setup, 14);
+ lp->set_conf.command = CmdConfigure;
+ i596_add_cmd(dev, (void *)&lp->set_conf);
+
+ memcpy ((void *)lp->eth_addr, dev->dev_addr, 6);
+ lp->set_add.command = CmdIASetup;
+ i596_add_cmd(dev, (struct i596_cmd *)&lp->set_add);
+
+ lp->tdr.command = CmdTDR;
+ i596_add_cmd(dev, (struct i596_cmd *)&lp->tdr);
+
+ if (lp->scb.command && i596_timeout(dev, "i82596 init", 200))
+ return 1;
+
+ lp->scb.command = RX_START;
+ CA();
+
+ barrier();
+
+ if (lp->scb.command && i596_timeout(dev, "Receive Unit start", 100))
+ return 1;
+
+ return 0;
+}
+
+/* Receive a single frame */
+static inline int
+i596_rx_one(struct net_device *dev, struct i596_private *lp,
+ struct i596_rfd *rfd, int *frames) {
+
+ if (rfd->stat & RFD_STAT_OK) {
+ /* a good frame */
+ int pkt_len = (rfd->count & 0x3fff);
+ struct sk_buff *skb = dev_alloc_skb(pkt_len);
+
+ (*frames)++;
+
+ if (rfd->cmd & CMD_EOL)
+ printk("Received on EOL\n");
+
+ if (skb == NULL) {
+ printk ("%s: i596_rx Memory squeeze, "
+ "dropping packet.\n", dev->name);
+ lp->stats.rx_dropped++;
+ return 1;
+ }
+
+ skb->dev = dev;
+ memcpy(skb_put(skb,pkt_len), rfd->data, pkt_len);
+
+ skb->protocol = eth_type_trans(skb,dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ lp->stats.rx_packets++;
+ } else {
+#if 0
+ printk("Frame reception error status %04x\n",
+ rfd->stat);
+#endif
+ lp->stats.rx_errors++;
+ if (rfd->stat & RFD_COLLISION)
+ lp->stats.collisions++;
+ if (rfd->stat & RFD_SHORT_FRAME_ERR)
+ lp->stats.rx_length_errors++;
+ if (rfd->stat & RFD_DMA_ERR)
+ lp->stats.rx_over_errors++;
+ if (rfd->stat & RFD_NOBUFS_ERR)
+ lp->stats.rx_fifo_errors++;
+ if (rfd->stat & RFD_ALIGN_ERR)
+ lp->stats.rx_frame_errors++;
+ if (rfd->stat & RFD_CRC_ERR)
+ lp->stats.rx_crc_errors++;
+ if (rfd->stat & RFD_LENGTH_ERR)
+ lp->stats.rx_length_errors++;
+ }
+ rfd->stat = rfd->count = 0;
+ return 0;
+}
+
+static int
+i596_rx(struct net_device *dev) {
+ struct i596_private *lp = (struct i596_private *) dev->priv;
+ struct i596_rfd *rfd;
+ int frames = 0;
+
+ while (1) {
+ rfd = pa_to_va(lp->scb.pa_rfd);
+ if (!rfd) {
+ printk(KERN_ERR "i596_rx: NULL rfd?\n");
+ return 0;
+ }
+#if 1
+ if (rfd->stat && !(rfd->stat & (RFD_STAT_C | RFD_STAT_B)))
+ printk("SF:%p-%04x\n", rfd, rfd->stat);
+#endif
+ if (!(rfd->stat & RFD_STAT_C))
+ break; /* next one not ready */
+ if (i596_rx_one(dev, lp, rfd, &frames))
+ break; /* out of memory */
+ rfd->cmd = CMD_EOL;
+ lp->rx_tail->cmd = 0;
+ lp->rx_tail = rfd;
+ lp->scb.pa_rfd = rfd->pa_next;
+ barrier();
+ }
+
+ return frames;
+}
+
+static void
+i596_cleanup_cmd(struct net_device *dev) {
+ struct i596_private *lp;
+ struct i596_cmd *cmd;
+
+ lp = (struct i596_private *) dev->priv;
+ while (lp->cmd_head) {
+ cmd = (struct i596_cmd *)lp->cmd_head;
+
+ lp->cmd_head = pa_to_va(lp->cmd_head->pa_next);
+ lp->cmd_backlog--;
+
+ switch ((cmd->command) & 0x7) {
+ case CmdTx: {
+ struct tx_cmd *tx_cmd = (struct tx_cmd *) cmd;
+ struct i596_tbd * tx_cmd_tbd;
+ tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd);
+
+ dev_kfree_skb_any(tx_cmd_tbd->skb);
+
+ lp->stats.tx_errors++;
+ lp->stats.tx_aborted_errors++;
+
+ cmd->pa_next = I596_NULL;
+ kfree((unsigned char *)tx_cmd);
+ netif_wake_queue(dev);
+ break;
+ }
+ case CmdMulticastList: {
+ // unsigned short count = *((unsigned short *) (ptr + 1));
+
+ cmd->pa_next = I596_NULL;
+ kfree((unsigned char *)cmd);
+ break;
+ }
+ default: {
+ cmd->pa_next = I596_NULL;
+ break;
+ }
+ }
+ barrier();
+ }
+
+ if (lp->scb.command && i596_timeout(dev, "i596_cleanup_cmd", 100))
+ ;
+
+ lp->scb.pa_cmd = va_to_pa(lp->cmd_head);
+}
+
+static void i596_reset(struct net_device *dev, struct i596_private *lp, int ioaddr) {
+
+ if (lp->scb.command && i596_timeout(dev, "i596_reset", 100))
+ ;
+
+ netif_stop_queue(dev);
+
+ lp->scb.command = CUC_ABORT | RX_ABORT;
+ CA();
+ barrier();
+
+ /* wait for shutdown */
+ if (lp->scb.command && i596_timeout(dev, "i596_reset(2)", 400))
+ ;
+
+ i596_cleanup_cmd(dev);
+ i596_rx(dev);
+
+ netif_start_queue(dev);
+ /*dev_kfree_skb(skb, FREE_WRITE);*/
+ init_i596(dev);
+}
+
+static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd) {
+ struct i596_private *lp = dev->priv;
+ int ioaddr = dev->base_addr;
+ unsigned long flags;
+
+ cmd->status = 0;
+ cmd->command |= (CMD_EOL | CMD_INTR);
+ cmd->pa_next = I596_NULL;
+
+ spin_lock_irqsave(&lp->cmd_lock, flags);
+
+ if (lp->cmd_head) {
+ lp->cmd_tail->pa_next = va_to_pa(cmd);
+ } else {
+ lp->cmd_head = cmd;
+ if (lp->scb.command && i596_timeout(dev, "i596_add_cmd", 100))
+ ;
+ lp->scb.pa_cmd = va_to_pa(cmd);
+ lp->scb.command = CUC_START;
+ CA();
+ }
+ lp->cmd_tail = cmd;
+ lp->cmd_backlog++;
+
+ lp->cmd_head = pa_to_va(lp->scb.pa_cmd);
+ spin_unlock_irqrestore(&lp->cmd_lock, flags);
+
+ if (lp->cmd_backlog > 16) {
+ int tickssofar = jiffies - lp->last_cmd;
+ if (tickssofar < HZ/4)
+ return;
+
+ printk(KERN_WARNING "%s: command unit timed out, status resetting.\n", dev->name);
+ i596_reset(dev, lp, ioaddr);
+ }
+}
+
+static int i596_open(struct net_device *dev)
+{
+ int i;
+
+ i = request_irq(dev->irq, &i596_interrupt, SA_SHIRQ, dev->name, dev);
+ if (i) {
+ printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
+ return i;
+ }
+
+ if ((i = init_rx_bufs(dev, RX_RING_SIZE)) < RX_RING_SIZE)
+ printk(KERN_ERR "%s: only able to allocate %d receive buffers\n", dev->name, i);
+
+ if (i < 4) {
+ free_irq(dev->irq, dev);
+ return -EAGAIN;
+ }
+ netif_start_queue(dev);
+ init_i596(dev);
+ return 0; /* Always succeed */
+}
+
+static int i596_start_xmit (struct sk_buff *skb, struct net_device *dev) {
+ struct i596_private *lp = dev->priv;
+ struct tx_cmd *tx_cmd;
+ short length;
+
+ length = skb->len;
+
+ if (length < ETH_ZLEN) {
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (skb == NULL)
+ return 0;
+ length = ETH_ZLEN;
+ }
+
+ dev->trans_start = jiffies;
+
+ tx_cmd = (struct tx_cmd *) kmalloc ((sizeof (struct tx_cmd) + sizeof (struct i596_tbd)), GFP_ATOMIC);
+ if (tx_cmd == NULL) {
+ printk(KERN_WARNING "%s: i596_xmit Memory squeeze, dropping packet.\n", dev->name);
+ lp->stats.tx_dropped++;
+ dev_kfree_skb (skb);
+ } else {
+ struct i596_tbd *tx_cmd_tbd;
+ tx_cmd_tbd = (struct i596_tbd *) (tx_cmd + 1);
+ tx_cmd->pa_tbd = va_to_pa (tx_cmd_tbd);
+ tx_cmd_tbd->pa_next = I596_NULL;
+
+ tx_cmd->cmd.command = (CMD_FLEX | CmdTx);
+
+ tx_cmd->pad = 0;
+ tx_cmd->size = 0;
+ tx_cmd_tbd->pad = 0;
+ tx_cmd_tbd->size = (EOF | length);
+
+ tx_cmd_tbd->pa_data = va_to_pa (skb->data);
+ tx_cmd_tbd->skb = skb;
+
+ if (i596_debug & LOG_SRCDST)
+ print_eth (skb->data);
+
+ i596_add_cmd (dev, (struct i596_cmd *) tx_cmd);
+
+ lp->stats.tx_packets++;
+ }
+
+ return 0;
+}
+
+static void
+i596_tx_timeout (struct net_device *dev) {
+ struct i596_private *lp = dev->priv;
+ int ioaddr = dev->base_addr;
+
+ /* Transmitter timeout, serious problems. */
+ printk(KERN_WARNING "%s: transmit timed out, status resetting.\n", dev->name);
+ lp->stats.tx_errors++;
+
+ /* Try to restart the adaptor */
+ if (lp->last_restart == lp->stats.tx_packets) {
+ printk ("Resetting board.\n");
+
+ /* Shutdown and restart */
+ i596_reset (dev, lp, ioaddr);
+ } else {
+ /* Issue a channel attention signal */
+ printk ("Kicking board.\n");
+ lp->scb.command = (CUC_START | RX_START);
+ CA();
+ lp->last_restart = lp->stats.tx_packets;
+ }
+ netif_wake_queue(dev);
+}
+
+static void print_eth(char *add)
+{
+ int i;
+
+ printk ("Dest ");
+ for (i = 0; i < 6; i++)
+ printk(" %2.2X", (unsigned char) add[i]);
+ printk ("\n");
+
+ printk ("Source");
+ for (i = 0; i < 6; i++)
+ printk(" %2.2X", (unsigned char) add[i+6]);
+ printk ("\n");
+
+ printk ("type %2.2X%2.2X\n",
+ (unsigned char) add[12], (unsigned char) add[13]);
+}
+
+static int __init lp486e_probe(struct net_device *dev) {
+ struct i596_private *lp;
+ unsigned char eth_addr[6] = { 0, 0xaa, 0, 0, 0, 0 };
+ unsigned char *bios;
+ int i, j;
+ int ret = -ENOMEM;
+ static int probed;
+
+ if (probed)
+ return -ENODEV;
+ probed++;
+
+ if (!request_region(IOADDR, LP486E_TOTAL_SIZE, DRV_NAME)) {
+ printk(KERN_ERR "lp486e: IO address 0x%x in use\n", IOADDR);
+ return -EBUSY;
+ }
+
+ lp = (struct i596_private *) dev->priv;
+ spin_lock_init(&lp->cmd_lock);
+
+ /*
+ * Do we really have this thing?
+ */
+ if (i596_scp_setup(dev)) {
+ ret = -ENODEV;
+ goto err_out_kfree;
+ }
+
+ dev->base_addr = IOADDR;
+ dev->irq = IRQ;
+
+
+ /*
+ * How do we find the ethernet address? I don't know.
+ * One possibility is to look at the EISA configuration area
+ * [0xe8000-0xe9fff]. This contains the ethernet address
+ * but not at a fixed address - things depend on setup options.
+ *
+ * If we find no address, or the wrong address, use
+ * ifconfig eth0 hw ether a1:a2:a3:a4:a5:a6
+ * with the value found in the BIOS setup.
+ */
+ bios = bus_to_virt(0xe8000);
+ for (j = 0; j < 0x2000; j++) {
+ if (bios[j] == 0 && bios[j+1] == 0xaa && bios[j+2] == 0) {
+ printk("%s: maybe address at BIOS 0x%x:",
+ dev->name, 0xe8000+j);
+ for (i = 0; i < 6; i++) {
+ eth_addr[i] = bios[i+j];
+ printk(" %2.2X", eth_addr[i]);
+ }
+ printk("\n");
+ }
+ }
+
+ printk("%s: lp486e 82596 at %#3lx, IRQ %d,",
+ dev->name, dev->base_addr, dev->irq);
+ for (i = 0; i < 6; i++)
+ printk(" %2.2X", dev->dev_addr[i] = eth_addr[i]);
+ printk("\n");
+
+ /* The LP486E-specific entries in the device structure. */
+ dev->open = &i596_open;
+ dev->stop = &i596_close;
+ dev->hard_start_xmit = &i596_start_xmit;
+ dev->get_stats = &i596_get_stats;
+ dev->set_multicast_list = &set_multicast_list;
+ dev->watchdog_timeo = 5*HZ;
+ dev->tx_timeout = i596_tx_timeout;
+
+#if 0
+ /* selftest reports 0x320925ae - don't know what that means */
+ i596_port_do(dev, PORT_SELFTEST, "selftest");
+ i596_port_do(dev, PORT_DUMP, "dump");
+#endif
+ return 0;
+
+err_out_kfree:
+ release_region(IOADDR, LP486E_TOTAL_SIZE);
+ return ret;
+}
+
+static inline void
+i596_handle_CU_completion(struct net_device *dev,
+ struct i596_private *lp,
+ unsigned short status,
+ unsigned short *ack_cmdp) {
+ struct i596_cmd *cmd;
+ int frames_out = 0;
+ int commands_done = 0;
+ int cmd_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->cmd_lock, flags);
+ cmd = lp->cmd_head;
+
+ while (lp->cmd_head && (lp->cmd_head->status & CMD_STAT_C)) {
+ cmd = lp->cmd_head;
+
+ lp->cmd_head = pa_to_va(lp->cmd_head->pa_next);
+ lp->cmd_backlog--;
+
+ commands_done++;
+ cmd_val = cmd->command & 0x7;
+#if 0
+ printk("finished CU %s command (%d)\n",
+ CUcmdnames[cmd_val], cmd_val);
+#endif
+ switch (cmd_val) {
+ case CmdTx:
+ {
+ struct tx_cmd *tx_cmd;
+ struct i596_tbd *tx_cmd_tbd;
+
+ tx_cmd = (struct tx_cmd *) cmd;
+ tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd);
+
+ frames_out++;
+ if (cmd->status & CMD_STAT_OK) {
+ if (i596_debug)
+ print_eth(pa_to_va(tx_cmd_tbd->pa_data));
+ } else {
+ lp->stats.tx_errors++;
+ if (i596_debug)
+ printk("transmission failure:%04x\n",
+ cmd->status);
+ if (cmd->status & 0x0020)
+ lp->stats.collisions++;
+ if (!(cmd->status & 0x0040))
+ lp->stats.tx_heartbeat_errors++;
+ if (cmd->status & 0x0400)
+ lp->stats.tx_carrier_errors++;
+ if (cmd->status & 0x0800)
+ lp->stats.collisions++;
+ if (cmd->status & 0x1000)
+ lp->stats.tx_aborted_errors++;
+ }
+ dev_kfree_skb_irq(tx_cmd_tbd->skb);
+
+ cmd->pa_next = I596_NULL;
+ kfree((unsigned char *)tx_cmd);
+ netif_wake_queue(dev);
+ break;
+ }
+
+ case CmdMulticastList:
+ cmd->pa_next = I596_NULL;
+ kfree((unsigned char *)cmd);
+ break;
+
+ case CmdTDR:
+ {
+ unsigned long status = *((unsigned long *) (cmd + 1));
+ if (status & 0x8000) {
+ if (i596_debug)
+ printk("%s: link ok.\n", dev->name);
+ } else {
+ if (status & 0x4000)
+ printk("%s: Transceiver problem.\n",
+ dev->name);
+ if (status & 0x2000)
+ printk("%s: Termination problem.\n",
+ dev->name);
+ if (status & 0x1000)
+ printk("%s: Short circuit.\n",
+ dev->name);
+ printk("%s: Time %ld.\n",
+ dev->name, status & 0x07ff);
+ }
+ }
+ default:
+ cmd->pa_next = I596_NULL;
+ lp->last_cmd = jiffies;
+
+ }
+ barrier();
+ }
+
+ cmd = lp->cmd_head;
+ while (cmd && (cmd != lp->cmd_tail)) {
+ cmd->command &= 0x1fff;
+ cmd = pa_to_va(cmd->pa_next);
+ barrier();
+ }
+
+ if (lp->cmd_head)
+ *ack_cmdp |= CUC_START;
+ lp->scb.pa_cmd = va_to_pa(lp->cmd_head);
+ spin_unlock_irqrestore(&lp->cmd_lock, flags);
+}
+
+static irqreturn_t
+i596_interrupt (int irq, void *dev_instance, struct pt_regs *regs) {
+ struct net_device *dev = (struct net_device *) dev_instance;
+ struct i596_private *lp;
+ unsigned short status, ack_cmd = 0;
+ int frames_in = 0;
+
+ lp = (struct i596_private *) dev->priv;
+
+ /*
+ * The 82596 examines the command, performs the required action,
+ * and then clears the SCB command word.
+ */
+ if (lp->scb.command && i596_timeout(dev, "interrupt", 40))
+ ;
+
+ /*
+ * The status word indicates the status of the 82596.
+ * It is modified only by the 82596.
+ *
+ * [So, we must not clear it. I find often status 0xffff,
+ * which is not one of the values allowed by the docs.]
+ */
+ status = lp->scb.status;
+#if 0
+ if (i596_debug) {
+ printk("%s: i596 interrupt, ", dev->name);
+ i596_out_status(status);
+ }
+#endif
+ /* Impossible, but it happens - perhaps when we get
+ a receive interrupt but scb.pa_rfd is I596_NULL. */
+ if (status == 0xffff) {
+ printk("%s: i596_interrupt: got status 0xffff\n", dev->name);
+ goto out;
+ }
+
+ ack_cmd = (status & STAT_ACK);
+
+ if (status & (STAT_CX | STAT_CNA))
+ i596_handle_CU_completion(dev, lp, status, &ack_cmd);
+
+ if (status & (STAT_FR | STAT_RNR)) {
+ /* Restart the receive unit when it got inactive somehow */
+ if ((status & STAT_RNR) && netif_running(dev))
+ ack_cmd |= RX_START;
+
+ if (status & STAT_FR) {
+ frames_in = i596_rx(dev);
+ if (!frames_in)
+ printk("receive frame reported, but no frames\n");
+ }
+ }
+
+ /* acknowledge the interrupt */
+ /*
+ if ((lp->scb.pa_cmd != I596_NULL) && netif_running(dev))
+ ack_cmd |= CUC_START;
+ */
+
+ if (lp->scb.command && i596_timeout(dev, "i596 interrupt", 100))
+ ;
+
+ lp->scb.command = ack_cmd;
+
+ CLEAR_INT();
+ CA();
+
+ out:
+ return IRQ_HANDLED;
+}
+
+static int i596_close(struct net_device *dev) {
+ struct i596_private *lp = dev->priv;
+
+ netif_stop_queue(dev);
+
+ if (i596_debug)
+ printk("%s: Shutting down ethercard, status was %4.4x.\n",
+ dev->name, lp->scb.status);
+
+ lp->scb.command = (CUC_ABORT | RX_ABORT);
+ CA();
+
+ i596_cleanup_cmd(dev);
+
+ if (lp->scb.command && i596_timeout(dev, "i596_close", 200))
+ ;
+
+ free_irq(dev->irq, dev);
+ remove_rx_bufs(dev);
+
+ return 0;
+}
+
+static struct net_device_stats * i596_get_stats(struct net_device *dev) {
+ struct i596_private *lp = dev->priv;
+
+ return &lp->stats;
+}
+
+/*
+* Set or clear the multicast filter for this adaptor.
+*/
+
+static void set_multicast_list(struct net_device *dev) {
+ struct i596_private *lp = dev->priv;
+ struct i596_cmd *cmd;
+
+ if (i596_debug > 1)
+ printk ("%s: set multicast list %d\n",
+ dev->name, dev->mc_count);
+
+ if (dev->mc_count > 0) {
+ struct dev_mc_list *dmi;
+ char *cp;
+ cmd = (struct i596_cmd *)kmalloc(sizeof(struct i596_cmd)+2+dev->mc_count*6, GFP_ATOMIC);
+ if (cmd == NULL) {
+ printk (KERN_ERR "%s: set_multicast Memory squeeze.\n", dev->name);
+ return;
+ }
+ cmd->command = CmdMulticastList;
+ *((unsigned short *) (cmd + 1)) = dev->mc_count * 6;
+ cp = ((char *)(cmd + 1))+2;
+ for (dmi = dev->mc_list; dmi != NULL; dmi = dmi->next) {
+ memcpy(cp, dmi,6);
+ cp += 6;
+ }
+ if (i596_debug & LOG_SRCDST)
+ print_eth (((char *)(cmd + 1)) + 2);
+ i596_add_cmd(dev, cmd);
+ } else {
+ if (lp->set_conf.pa_next != I596_NULL) {
+ return;
+ }
+ if (dev->mc_count == 0 && !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
+ if (dev->flags & IFF_ALLMULTI)
+ dev->flags |= IFF_PROMISC;
+ lp->i596_config[8] &= ~0x01;
+ } else {
+ lp->i596_config[8] |= 0x01;
+ }
+
+ i596_add_cmd(dev, (struct i596_cmd *) &lp->set_conf);
+ }
+}
+
+MODULE_AUTHOR("Ard van Breemen <ard@cstmel.nl.eu.org>");
+MODULE_DESCRIPTION("Intel Panther onboard i82596 driver");
+MODULE_LICENSE("GPL");
+
+static struct net_device *dev_lp486e;
+static int full_duplex;
+static int options;
+static int io = IOADDR;
+static int irq = IRQ;
+
+module_param(debug, int, 0);
+//module_param(max_interrupt_work, int, 0);
+//module_param(reverse_probe, int, 0);
+//module_param(rx_copybreak, int, 0);
+module_param(options, int, 0);
+module_param(full_duplex, int, 0);
+
+static int __init lp486e_init_module(void) {
+ int err;
+ struct net_device *dev = alloc_etherdev(sizeof(struct i596_private));
+ if (!dev)
+ return -ENOMEM;
+
+ dev->irq = irq;
+ dev->base_addr = io;
+ err = lp486e_probe(dev);
+ if (err) {
+ free_netdev(dev);
+ return err;
+ }
+ err = register_netdev(dev);
+ if (err) {
+ release_region(dev->base_addr, LP486E_TOTAL_SIZE);
+ free_netdev(dev);
+ return err;
+ }
+ dev_lp486e = dev;
+ full_duplex = 0;
+ options = 0;
+ return 0;
+}
+
+static void __exit lp486e_cleanup_module(void) {
+ unregister_netdev(dev_lp486e);
+ release_region(dev_lp486e->base_addr, LP486E_TOTAL_SIZE);
+ free_netdev(dev_lp486e);
+}
+
+module_init(lp486e_init_module);
+module_exit(lp486e_cleanup_module);