diff options
Diffstat (limited to 'drivers/net/netxen/netxen_nic_ethtool.c')
| -rw-r--r-- | drivers/net/netxen/netxen_nic_ethtool.c | 135 |
1 files changed, 53 insertions, 82 deletions
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index 0894a7be022..6b25121cfc1 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2003 - 2006 NetXen, Inc. + * Copyright (C) 2003 - 2009 NetXen, Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -22,12 +22,9 @@ * * Contact Information: * info@netxen.com - * NetXen, - * 3965 Freedom Circle, Fourth floor, - * Santa Clara, CA 95054 - * - * - * ethtool support for netxen nic + * NetXen Inc, + * 18922 Forge Drive + * Cupertino, CA 95014-0701 * */ @@ -473,78 +470,6 @@ netxen_nic_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, return 0; } -#if 0 -static int -netxen_nic_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, - u8 * bytes) -{ - struct netxen_adapter *adapter = netdev_priv(dev); - int offset = eeprom->offset; - static int flash_start; - static int ready_to_flash; - int ret; - - if (flash_start == 0) { - netxen_halt_pegs(adapter); - ret = netxen_flash_unlock(adapter); - if (ret < 0) { - printk(KERN_ERR "%s: Flash unlock failed.\n", - netxen_nic_driver_name); - return ret; - } - printk(KERN_INFO "%s: flash unlocked. \n", - netxen_nic_driver_name); - ret = netxen_flash_erase_secondary(adapter); - if (ret != FLASH_SUCCESS) { - printk(KERN_ERR "%s: Flash erase failed.\n", - netxen_nic_driver_name); - return ret; - } - printk(KERN_INFO "%s: secondary flash erased successfully.\n", - netxen_nic_driver_name); - flash_start = 1; - return 0; - } - - if (offset == NETXEN_BOOTLD_START) { - ret = netxen_flash_erase_primary(adapter); - if (ret != FLASH_SUCCESS) { - printk(KERN_ERR "%s: Flash erase failed.\n", - netxen_nic_driver_name); - return ret; - } - - ret = netxen_rom_se(adapter, NETXEN_USER_START); - if (ret != FLASH_SUCCESS) - return ret; - ret = netxen_rom_se(adapter, NETXEN_FIXED_START); - if (ret != FLASH_SUCCESS) - return ret; - - printk(KERN_INFO "%s: primary flash erased successfully\n", - netxen_nic_driver_name); - - ret = netxen_backup_crbinit(adapter); - if (ret != FLASH_SUCCESS) { - printk(KERN_ERR "%s: CRBinit backup failed.\n", - netxen_nic_driver_name); - return ret; - } - printk(KERN_INFO "%s: CRBinit backup done.\n", - netxen_nic_driver_name); - ready_to_flash = 1; - } - - if (!ready_to_flash) { - printk(KERN_ERR "%s: Invalid write sequence, returning...\n", - netxen_nic_driver_name); - return -EINVAL; - } - - return netxen_rom_fast_write_words(adapter, offset, bytes, eeprom->len); -} -#endif /* 0 */ - static void netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring) { @@ -810,6 +735,53 @@ static int netxen_nic_set_tso(struct net_device *dev, u32 data) return 0; } +static void +netxen_nic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct netxen_adapter *adapter = netdev_priv(dev); + u32 wol_cfg = 0; + + wol->supported = 0; + wol->wolopts = 0; + + if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) + return; + + wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG_NV); + if (wol_cfg & (1UL << adapter->portnum)) + wol->supported |= WAKE_MAGIC; + + wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG); + if (wol_cfg & (1UL << adapter->portnum)) + wol->wolopts |= WAKE_MAGIC; +} + +static int +netxen_nic_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct netxen_adapter *adapter = netdev_priv(dev); + u32 wol_cfg = 0; + + if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) + return -EOPNOTSUPP; + + if (wol->wolopts & ~WAKE_MAGIC) + return -EOPNOTSUPP; + + wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG_NV); + if (!(wol_cfg & (1 << adapter->portnum))) + return -EOPNOTSUPP; + + wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG); + if (wol->wolopts & WAKE_MAGIC) + wol_cfg |= 1UL << adapter->portnum; + else + wol_cfg &= ~(1UL << adapter->portnum); + netxen_nic_reg_write(adapter, NETXEN_WOL_CONFIG, wol_cfg); + + return 0; +} + /* * Set the coalescing parameters. Currently only normal is supported. * If rx_coalesce_usecs == 0 or rx_max_coalesced_frames == 0 then set the @@ -906,9 +878,6 @@ struct ethtool_ops netxen_nic_ethtool_ops = { .get_link = ethtool_op_get_link, .get_eeprom_len = netxen_nic_get_eeprom_len, .get_eeprom = netxen_nic_get_eeprom, -#if 0 - .set_eeprom = netxen_nic_set_eeprom, -#endif .get_ringparam = netxen_nic_get_ringparam, .get_pauseparam = netxen_nic_get_pauseparam, .set_pauseparam = netxen_nic_set_pauseparam, @@ -916,6 +885,8 @@ struct ethtool_ops netxen_nic_ethtool_ops = { .set_sg = ethtool_op_set_sg, .get_tso = netxen_nic_get_tso, .set_tso = netxen_nic_set_tso, + .get_wol = netxen_nic_get_wol, + .set_wol = netxen_nic_set_wol, .self_test = netxen_nic_diag_test, .get_strings = netxen_nic_get_strings, .get_ethtool_stats = netxen_nic_get_ethtool_stats, |