aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/sb1250-mac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sb1250-mac.c')
-rw-r--r--drivers/net/sb1250-mac.c109
1 files changed, 70 insertions, 39 deletions
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index aa4ca182175..f2be9f83f09 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2001,2002,2003 Broadcom Corporation
+ * Copyright (C) 2001,2002,2003,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -43,6 +43,7 @@
#define SBMAC_ETH0_HWADDR "40:00:00:00:01:00"
#define SBMAC_ETH1_HWADDR "40:00:00:00:01:01"
#define SBMAC_ETH2_HWADDR "40:00:00:00:01:02"
+#define SBMAC_ETH3_HWADDR "40:00:00:00:01:03"
#endif
@@ -57,7 +58,7 @@ static char version1[] __devinitdata =
#define CONFIG_SBMAC_COALESCE
-#define MAX_UNITS 3 /* More are supported, limit only on options */
+#define MAX_UNITS 4 /* More are supported, limit only on options */
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (2*HZ)
@@ -85,11 +86,11 @@ MODULE_PARM_DESC(noisy_mii, "MII status messages");
The media type is usually passed in 'options[]'.
*/
#ifdef MODULE
-static int options[MAX_UNITS] = {-1, -1, -1};
+static int options[MAX_UNITS] = {-1, -1, -1, -1};
module_param_array(options, int, NULL, S_IRUGO);
MODULE_PARM_DESC(options, "1-" __MODULE_STRING(MAX_UNITS));
-static int full_duplex[MAX_UNITS] = {-1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1};
module_param_array(full_duplex, int, NULL, S_IRUGO);
MODULE_PARM_DESC(full_duplex, "1-" __MODULE_STRING(MAX_UNITS));
#endif
@@ -105,13 +106,26 @@ MODULE_PARM_DESC(int_timeout, "Timeout value");
#endif
#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_defs.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_mac.h>
-#include <asm/sibyte/sb1250_dma.h>
#include <asm/sibyte/sb1250_int.h>
+#else
+#error invalid SiByte MAC configuation
+#endif
#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/sb1250_mac.h>
+#include <asm/sibyte/sb1250_dma.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#define UNIT_INT(n) (K_BCM1480_INT_MAC_0 + ((n) * 2))
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
+#define UNIT_INT(n) (K_INT_MAC_0 + (n))
+#else
+#error invalid SiByte MAC configuation
+#endif
/**********************************************************************
* Simple types
@@ -1476,10 +1490,10 @@ static void sbmac_channel_start(struct sbmac_softc *s)
* and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above
* Use a larger RD_THRSH for gigabit
*/
- if (periph_rev >= 2)
- th_value = 64;
- else
+ if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2)
th_value = 28;
+ else
+ th_value = 64;
fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */
((s->sbm_speed == sbmac_speed_1000)
@@ -1589,13 +1603,17 @@ static void sbmac_channel_start(struct sbmac_softc *s)
* Turn on the rest of the bits in the enable register
*/
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ __raw_writeq(M_MAC_RXDMA_EN0 |
+ M_MAC_TXDMA_EN0, s->sbm_macenable);
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
__raw_writeq(M_MAC_RXDMA_EN0 |
M_MAC_TXDMA_EN0 |
M_MAC_RX_ENABLE |
M_MAC_TX_ENABLE, s->sbm_macenable);
-
-
-
+#else
+#error invalid SiByte MAC configuation
+#endif
#ifdef CONFIG_SBMAC_COALESCE
/*
@@ -1786,11 +1804,12 @@ static void sbmac_set_iphdr_offset(struct sbmac_softc *sc)
reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15);
__raw_writeq(reg, sc->sbm_rxfilter);
- /* read system identification to determine revision */
- if (periph_rev >= 2) {
- sc->rx_hw_checksum = ENABLE;
- } else {
+ /* BCM1250 pass1 didn't have hardware checksum. Everything
+ later does. */
+ if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2) {
sc->rx_hw_checksum = DISABLE;
+ } else {
+ sc->rx_hw_checksum = ENABLE;
}
}
@@ -2220,7 +2239,7 @@ static void sbmac_setmulti(struct sbmac_softc *sc)
-#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
+#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) || defined(SBMAC_ETH3_HWADDR)
/**********************************************************************
* SBMAC_PARSE_XDIGIT(str)
*
@@ -2792,7 +2811,7 @@ static int sbmac_close(struct net_device *dev)
-#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
+#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) || defined(SBMAC_ETH3_HWADDR)
static void
sbmac_setup_hwaddr(int chan,char *addr)
{
@@ -2818,25 +2837,7 @@ sbmac_init_module(void)
unsigned long port;
int chip_max_units;
- /*
- * For bringup when not using the firmware, we can pre-fill
- * the MAC addresses using the environment variables
- * specified in this file (or maybe from the config file?)
- */
-#ifdef SBMAC_ETH0_HWADDR
- sbmac_setup_hwaddr(0,SBMAC_ETH0_HWADDR);
-#endif
-#ifdef SBMAC_ETH1_HWADDR
- sbmac_setup_hwaddr(1,SBMAC_ETH1_HWADDR);
-#endif
-#ifdef SBMAC_ETH2_HWADDR
- sbmac_setup_hwaddr(2,SBMAC_ETH2_HWADDR);
-#endif
-
- /*
- * Walk through the Ethernet controllers and find
- * those who have their MAC addresses set.
- */
+ /* Set the number of available units based on the SOC type. */
switch (soc_type) {
case K_SYS_SOC_TYPE_BCM1250:
case K_SYS_SOC_TYPE_BCM1250_ALT:
@@ -2848,6 +2849,10 @@ sbmac_init_module(void)
case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */
chip_max_units = 2;
break;
+ case K_SYS_SOC_TYPE_BCM1x55:
+ case K_SYS_SOC_TYPE_BCM1x80:
+ chip_max_units = 4;
+ break;
default:
chip_max_units = 0;
break;
@@ -2855,6 +2860,32 @@ sbmac_init_module(void)
if (chip_max_units > MAX_UNITS)
chip_max_units = MAX_UNITS;
+ /*
+ * For bringup when not using the firmware, we can pre-fill
+ * the MAC addresses using the environment variables
+ * specified in this file (or maybe from the config file?)
+ */
+#ifdef SBMAC_ETH0_HWADDR
+ if (chip_max_units > 0)
+ sbmac_setup_hwaddr(0,SBMAC_ETH0_HWADDR);
+#endif
+#ifdef SBMAC_ETH1_HWADDR
+ if (chip_max_units > 1)
+ sbmac_setup_hwaddr(1,SBMAC_ETH1_HWADDR);
+#endif
+#ifdef SBMAC_ETH2_HWADDR
+ if (chip_max_units > 2)
+ sbmac_setup_hwaddr(2,SBMAC_ETH2_HWADDR);
+#endif
+#ifdef SBMAC_ETH3_HWADDR
+ if (chip_max_units > 3)
+ sbmac_setup_hwaddr(3,SBMAC_ETH3_HWADDR);
+#endif
+
+ /*
+ * Walk through the Ethernet controllers and find
+ * those who have their MAC addresses set.
+ */
for (idx = 0; idx < chip_max_units; idx++) {
/*
@@ -2886,7 +2917,7 @@ sbmac_init_module(void)
printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port);
- dev->irq = K_INT_MAC_0 + idx;
+ dev->irq = UNIT_INT(idx);
dev->base_addr = port;
dev->mem_end = 0;
if (sbmac_init(dev, idx)) {
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 11:36:44 +0000