diff options
Diffstat (limited to 'drivers/net/sfc/boards.c')
| -rw-r--r-- | drivers/net/sfc/boards.c | 328 |
1 files changed, 0 insertions, 328 deletions
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c deleted file mode 100644 index 4a4c74c891b..00000000000 --- a/drivers/net/sfc/boards.c +++ /dev/null @@ -1,328 +0,0 @@ -/**************************************************************************** - * Driver for Solarflare Solarstorm network controllers and boards - * Copyright 2007-2008 Solarflare Communications Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation, incorporated herein by reference. - */ - -#include "net_driver.h" -#include "phy.h" -#include "boards.h" -#include "efx.h" -#include "workarounds.h" - -/* Macros for unpacking the board revision */ -/* The revision info is in host byte order. */ -#define BOARD_TYPE(_rev) (_rev >> 8) -#define BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf) -#define BOARD_MINOR(_rev) (_rev & 0xf) - -/* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */ -#define BLINK_INTERVAL (HZ/2) - -static void blink_led_timer(unsigned long context) -{ - struct efx_nic *efx = (struct efx_nic *)context; - struct efx_blinker *bl = &efx->board_info.blinker; - efx->board_info.set_id_led(efx, bl->state); - bl->state = !bl->state; - if (bl->resubmit) - mod_timer(&bl->timer, jiffies + BLINK_INTERVAL); -} - -static void board_blink(struct efx_nic *efx, bool blink) -{ - struct efx_blinker *blinker = &efx->board_info.blinker; - - /* The rtnl mutex serialises all ethtool ioctls, so - * nothing special needs doing here. */ - if (blink) { - blinker->resubmit = true; - blinker->state = false; - setup_timer(&blinker->timer, blink_led_timer, - (unsigned long)efx); - mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL); - } else { - blinker->resubmit = false; - if (blinker->timer.function) - del_timer_sync(&blinker->timer); - efx->board_info.init_leds(efx); - } -} - -/***************************************************************************** - * Support for LM87 sensor chip used on several boards - */ -#define LM87_REG_ALARMS1 0x41 -#define LM87_REG_ALARMS2 0x42 -#define LM87_IN_LIMITS(nr, _min, _max) \ - 0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min -#define LM87_AIN_LIMITS(nr, _min, _max) \ - 0x3B + (nr), _max, 0x1A + (nr), _min -#define LM87_TEMP_INT_LIMITS(_min, _max) \ - 0x39, _max, 0x3A, _min -#define LM87_TEMP_EXT1_LIMITS(_min, _max) \ - 0x37, _max, 0x38, _min - -#define LM87_ALARM_TEMP_INT 0x10 -#define LM87_ALARM_TEMP_EXT1 0x20 - -#if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE) - -static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info, - const u8 *reg_values) -{ - struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info); - int rc; - - if (!client) - return -EIO; - - while (*reg_values) { - u8 reg = *reg_values++; - u8 value = *reg_values++; - rc = i2c_smbus_write_byte_data(client, reg, value); - if (rc) - goto err; - } - - efx->board_info.hwmon_client = client; - return 0; - -err: - i2c_unregister_device(client); - return rc; -} - -static void efx_fini_lm87(struct efx_nic *efx) -{ - i2c_unregister_device(efx->board_info.hwmon_client); -} - -static int efx_check_lm87(struct efx_nic *efx, unsigned mask) -{ - struct i2c_client *client = efx->board_info.hwmon_client; - s32 alarms1, alarms2; - - /* If link is up then do not monitor temperature */ - if (EFX_WORKAROUND_7884(efx) && efx->link_up) - return 0; - - alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1); - alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2); - if (alarms1 < 0) - return alarms1; - if (alarms2 < 0) - return alarms2; - alarms1 &= mask; - alarms2 &= mask >> 8; - if (alarms1 || alarms2) { - EFX_ERR(efx, - "LM87 detected a hardware failure (status %02x:%02x)" - "%s%s\n", - alarms1, alarms2, - (alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "", - (alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : ""); - return -ERANGE; - } - - return 0; -} - -#else /* !CONFIG_SENSORS_LM87 */ - -static inline int -efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info, - const u8 *reg_values) -{ - return 0; -} -static inline void efx_fini_lm87(struct efx_nic *efx) -{ -} -static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask) -{ - return 0; -} - -#endif /* CONFIG_SENSORS_LM87 */ - -/***************************************************************************** - * Support for the SFE4002 - * - */ -static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */ - -static const u8 sfe4002_lm87_regs[] = { - LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */ - LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */ - LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */ - LM87_IN_LIMITS(3, 0xb0, 0xc9), /* 5V: 4.6-5.2V */ - LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */ - LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */ - LM87_AIN_LIMITS(0, 0xa0, 0xb2), /* AIN1: 1.66V +/- 5% */ - LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */ - LM87_TEMP_INT_LIMITS(10, 60), /* board */ - LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */ - 0 -}; - -static struct i2c_board_info sfe4002_hwmon_info = { - I2C_BOARD_INFO("lm87", 0x2e), - .platform_data = &sfe4002_lm87_channel, -}; - -/****************************************************************************/ -/* LED allocations. Note that on rev A0 boards the schematic and the reality - * differ: red and green are swapped. Below is the fixed (A1) layout (there - * are only 3 A0 boards in existence, so no real reason to make this - * conditional). - */ -#define SFE4002_FAULT_LED (2) /* Red */ -#define SFE4002_RX_LED (0) /* Green */ -#define SFE4002_TX_LED (1) /* Amber */ - -static void sfe4002_init_leds(struct efx_nic *efx) -{ - /* Set the TX and RX LEDs to reflect status and activity, and the - * fault LED off */ - xfp_set_led(efx, SFE4002_TX_LED, - QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT); - xfp_set_led(efx, SFE4002_RX_LED, - QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT); - xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF); -} - -static void sfe4002_set_id_led(struct efx_nic *efx, bool state) -{ - xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON : - QUAKE_LED_OFF); -} - -static int sfe4002_check_hw(struct efx_nic *efx) -{ - /* A0 board rev. 4002s report a temperature fault the whole time - * (bad sensor) so we mask it out. */ - unsigned alarm_mask = - (efx->board_info.major == 0 && efx->board_info.minor == 0) ? - ~LM87_ALARM_TEMP_EXT1 : ~0; - - return efx_check_lm87(efx, alarm_mask); -} - -static int sfe4002_init(struct efx_nic *efx) -{ - int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs); - if (rc) - return rc; - efx->board_info.monitor = sfe4002_check_hw; - efx->board_info.init_leds = sfe4002_init_leds; - efx->board_info.set_id_led = sfe4002_set_id_led; - efx->board_info.blink = board_blink; - efx->board_info.fini = efx_fini_lm87; - return 0; -} - -/***************************************************************************** - * Support for the SFN4112F - * - */ -static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */ - -static const u8 sfn4112f_lm87_regs[] = { - LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */ - LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */ - LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */ - LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */ - LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */ - LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */ - LM87_TEMP_INT_LIMITS(10, 60), /* board */ - LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */ - 0 -}; - -static struct i2c_board_info sfn4112f_hwmon_info = { - I2C_BOARD_INFO("lm87", 0x2e), - .platform_data = &sfn4112f_lm87_channel, -}; - -#define SFN4112F_ACT_LED 0 -#define SFN4112F_LINK_LED 1 - -static void sfn4112f_init_leds(struct efx_nic *efx) -{ - xfp_set_led(efx, SFN4112F_ACT_LED, - QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT); - xfp_set_led(efx, SFN4112F_LINK_LED, - QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT); -} - -static void sfn4112f_set_id_led(struct efx_nic *efx, bool state) -{ - xfp_set_led(efx, SFN4112F_LINK_LED, - state ? QUAKE_LED_ON : QUAKE_LED_OFF); -} - -static int sfn4112f_check_hw(struct efx_nic *efx) -{ - /* Mask out unused sensors */ - return efx_check_lm87(efx, ~0x48); -} - -static int sfn4112f_init(struct efx_nic *efx) -{ - int rc = efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs); - if (rc) - return rc; - efx->board_info.monitor = sfn4112f_check_hw; - efx->board_info.init_leds = sfn4112f_init_leds; - efx->board_info.set_id_led = sfn4112f_set_id_led; - efx->board_info.blink = board_blink; - efx->board_info.fini = efx_fini_lm87; - return 0; -} - -/* This will get expanded as board-specific details get moved out of the - * PHY drivers. */ -struct efx_board_data { - enum efx_board_type type; - const char *ref_model; - const char *gen_type; - int (*init) (struct efx_nic *nic); -}; - - -static struct efx_board_data board_data[] = { - { EFX_BOARD_SFE4001, "SFE4001", "10GBASE-T adapter", sfe4001_init }, - { EFX_BOARD_SFE4002, "SFE4002", "XFP adapter", sfe4002_init }, - { EFX_BOARD_SFN4111T, "SFN4111T", "100/1000/10GBASE-T adapter", - sfn4111t_init }, - { EFX_BOARD_SFN4112F, "SFN4112F", "SFP+ adapter", - sfn4112f_init }, -}; - -void efx_set_board_info(struct efx_nic *efx, u16 revision_info) -{ - struct efx_board_data *data = NULL; - int i; - - efx->board_info.type = BOARD_TYPE(revision_info); - efx->board_info.major = BOARD_MAJOR(revision_info); - efx->board_info.minor = BOARD_MINOR(revision_info); - - for (i = 0; i < ARRAY_SIZE(board_data); i++) - if (board_data[i].type == efx->board_info.type) - data = &board_data[i]; - - if (data) { - EFX_INFO(efx, "board is %s rev %c%d\n", - (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC) - ? data->ref_model : data->gen_type, - 'A' + efx->board_info.major, efx->board_info.minor); - efx->board_info.init = data->init; - } else { - EFX_ERR(efx, "unknown board type %d\n", efx->board_info.type); - } -} |