aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/skge.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/skge.c')
-rw-r--r--drivers/net/skge.c244
1 files changed, 164 insertions, 80 deletions
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index b60f0451f6c..e482e7fcbb2 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -42,7 +42,7 @@
#include "skge.h"
#define DRV_NAME "skge"
-#define DRV_VERSION "1.9"
+#define DRV_VERSION "1.10"
#define PFX DRV_NAME " "
#define DEFAULT_TX_RING_SIZE 128
@@ -60,7 +60,7 @@
#define LINK_HZ (HZ/2)
MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver");
-MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
+MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
@@ -132,18 +132,93 @@ static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs,
}
/* Wake on Lan only supported on Yukon chips with rev 1 or above */
-static int wol_supported(const struct skge_hw *hw)
+static u32 wol_supported(const struct skge_hw *hw)
{
- return !((hw->chip_id == CHIP_ID_GENESIS ||
- (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0)));
+ if (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev != 0)
+ return WAKE_MAGIC | WAKE_PHY;
+ else
+ return 0;
+}
+
+static u32 pci_wake_enabled(struct pci_dev *dev)
+{
+ int pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ u16 value;
+
+ /* If device doesn't support PM Capabilities, but request is to disable
+ * wake events, it's a nop; otherwise fail */
+ if (!pm)
+ return 0;
+
+ pci_read_config_word(dev, pm + PCI_PM_PMC, &value);
+
+ value &= PCI_PM_CAP_PME_MASK;
+ value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
+
+ return value != 0;
+}
+
+static void skge_wol_init(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ enum pause_control save_mode;
+ u32 ctrl;
+
+ /* Bring hardware out of reset */
+ skge_write16(hw, B0_CTST, CS_RST_CLR);
+ skge_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
+
+ skge_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+ skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ /* Force to 10/100 skge_reset will re-enable on resume */
+ save_mode = skge->flow_control;
+ skge->flow_control = FLOW_MODE_SYMMETRIC;
+
+ ctrl = skge->advertising;
+ skge->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
+
+ skge_phy_reset(skge);
+
+ skge->flow_control = save_mode;
+ skge->advertising = ctrl;
+
+ /* Set GMAC to no flow control and auto update for speed/duplex */
+ gma_write16(hw, port, GM_GP_CTRL,
+ GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
+ GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
+
+ /* Set WOL address */
+ memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
+ skge->netdev->dev_addr, ETH_ALEN);
+
+ /* Turn on appropriate WOL control bits */
+ skge_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
+ ctrl = 0;
+ if (skge->wol & WAKE_PHY)
+ ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
+
+ if (skge->wol & WAKE_MAGIC)
+ ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
+
+ ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
+ skge_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
+
+ /* block receiver */
+ skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
}
static void skge_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct skge_port *skge = netdev_priv(dev);
- wol->supported = wol_supported(skge->hw) ? WAKE_MAGIC : 0;
- wol->wolopts = skge->wol ? WAKE_MAGIC : 0;
+ wol->supported = wol_supported(skge->hw);
+ wol->wolopts = skge->wol;
}
static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
@@ -151,23 +226,12 @@ static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
struct skge_port *skge = netdev_priv(dev);
struct skge_hw *hw = skge->hw;
- if (wol->wolopts != WAKE_MAGIC && wol->wolopts != 0)
- return -EOPNOTSUPP;
-
- if (wol->wolopts == WAKE_MAGIC && !wol_supported(hw))
+ if (wol->wolopts & wol_supported(hw))
return -EOPNOTSUPP;
- skge->wol = wol->wolopts == WAKE_MAGIC;
-
- if (skge->wol) {
- memcpy_toio(hw->regs + WOL_MAC_ADDR, dev->dev_addr, ETH_ALEN);
-
- skge_write16(hw, WOL_CTRL_STAT,
- WOL_CTL_ENA_PME_ON_MAGIC_PKT |
- WOL_CTL_ENA_MAGIC_PKT_UNIT);
- } else
- skge_write16(hw, WOL_CTRL_STAT, WOL_CTL_DEFAULT);
-
+ skge->wol = wol->wolopts;
+ if (!netif_running(dev))
+ skge_wol_init(skge);
return 0;
}
@@ -749,7 +813,7 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u32 base)
struct skge_element *e;
int i;
- ring->start = kcalloc(sizeof(*e), ring->count, GFP_KERNEL);
+ ring->start = kcalloc(ring->count, sizeof(*e), GFP_KERNEL);
if (!ring->start)
return -ENOMEM;
@@ -2373,6 +2437,9 @@ static int skge_up(struct net_device *dev)
size_t rx_size, tx_size;
int err;
+ if (!is_valid_ether_addr(dev->dev_addr))
+ return -EINVAL;
+
if (netif_msg_ifup(skge))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
@@ -2392,7 +2459,7 @@ static int skge_up(struct net_device *dev)
BUG_ON(skge->dma & 7);
if ((u64)skge->dma >> 32 != ((u64) skge->dma + skge->mem_size) >> 32) {
- printk(KERN_ERR PFX "pci_alloc_consistent region crosses 4G boundary\n");
+ dev_err(&hw->pdev->dev, "pci_alloc_consistent region crosses 4G boundary\n");
err = -EINVAL;
goto free_pci_mem;
}
@@ -2920,6 +2987,7 @@ static int skge_poll(struct net_device *dev, int *budget)
struct skge_hw *hw = skge->hw;
struct skge_ring *ring = &skge->rx_ring;
struct skge_element *e;
+ unsigned long flags;
int to_do = min(dev->quota, *budget);
int work_done = 0;
@@ -2957,12 +3025,12 @@ static int skge_poll(struct net_device *dev, int *budget)
if (work_done >= to_do)
return 1; /* not done */
- spin_lock_irq(&hw->hw_lock);
+ spin_lock_irqsave(&hw->hw_lock, flags);
__netif_rx_complete(dev);
hw->intr_mask |= irqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
skge_read32(hw, B0_IMSK);
- spin_unlock_irq(&hw->hw_lock);
+ spin_unlock_irqrestore(&hw->hw_lock, flags);
return 0;
}
@@ -3000,6 +3068,7 @@ static void skge_mac_intr(struct skge_hw *hw, int port)
/* Handle device specific framing and timeout interrupts */
static void skge_error_irq(struct skge_hw *hw)
{
+ struct pci_dev *pdev = hw->pdev;
u32 hwstatus = skge_read32(hw, B0_HWE_ISRC);
if (hw->chip_id == CHIP_ID_GENESIS) {
@@ -3015,12 +3084,12 @@ static void skge_error_irq(struct skge_hw *hw)
}
if (hwstatus & IS_RAM_RD_PAR) {
- printk(KERN_ERR PFX "Ram read data parity error\n");
+ dev_err(&pdev->dev, "Ram read data parity error\n");
skge_write16(hw, B3_RI_CTRL, RI_CLR_RD_PERR);
}
if (hwstatus & IS_RAM_WR_PAR) {
- printk(KERN_ERR PFX "Ram write data parity error\n");
+ dev_err(&pdev->dev, "Ram write data parity error\n");
skge_write16(hw, B3_RI_CTRL, RI_CLR_WR_PERR);
}
@@ -3031,38 +3100,38 @@ static void skge_error_irq(struct skge_hw *hw)
skge_mac_parity(hw, 1);
if (hwstatus & IS_R1_PAR_ERR) {
- printk(KERN_ERR PFX "%s: receive queue parity error\n",
- hw->dev[0]->name);
+ dev_err(&pdev->dev, "%s: receive queue parity error\n",
+ hw->dev[0]->name);
skge_write32(hw, B0_R1_CSR, CSR_IRQ_CL_P);
}
if (hwstatus & IS_R2_PAR_ERR) {
- printk(KERN_ERR PFX "%s: receive queue parity error\n",
- hw->dev[1]->name);
+ dev_err(&pdev->dev, "%s: receive queue parity error\n",
+ hw->dev[1]->name);
skge_write32(hw, B0_R2_CSR, CSR_IRQ_CL_P);
}
if (hwstatus & (IS_IRQ_MST_ERR|IS_IRQ_STAT)) {
u16 pci_status, pci_cmd;
- pci_read_config_word(hw->pdev, PCI_COMMAND, &pci_cmd);
- pci_read_config_word(hw->pdev, PCI_STATUS, &pci_status);
+ pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
+ pci_read_config_word(pdev, PCI_STATUS, &pci_status);
- printk(KERN_ERR PFX "%s: PCI error cmd=%#x status=%#x\n",
- pci_name(hw->pdev), pci_cmd, pci_status);
+ dev_err(&pdev->dev, "PCI error cmd=%#x status=%#x\n",
+ pci_cmd, pci_status);
/* Write the error bits back to clear them. */
pci_status &= PCI_STATUS_ERROR_BITS;
skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_write_config_word(hw->pdev, PCI_COMMAND,
+ pci_write_config_word(pdev, PCI_COMMAND,
pci_cmd | PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
- pci_write_config_word(hw->pdev, PCI_STATUS, pci_status);
+ pci_write_config_word(pdev, PCI_STATUS, pci_status);
skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
/* if error still set then just ignore it */
hwstatus = skge_read32(hw, B0_HWE_ISRC);
if (hwstatus & IS_IRQ_STAT) {
- printk(KERN_INFO PFX "unable to clear error (so ignoring them)\n");
+ dev_warn(&hw->pdev->dev, "unable to clear error (so ignoring them)\n");
hw->intr_mask &= ~IS_HW_ERR;
}
}
@@ -3276,8 +3345,8 @@ static int skge_reset(struct skge_hw *hw)
hw->phy_addr = PHY_ADDR_BCOM;
break;
default:
- printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n",
- pci_name(hw->pdev), hw->phy_type);
+ dev_err(&hw->pdev->dev, "unsupported phy type 0x%x\n",
+ hw->phy_type);
return -EOPNOTSUPP;
}
break;
@@ -3292,8 +3361,8 @@ static int skge_reset(struct skge_hw *hw)
break;
default:
- printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
- pci_name(hw->pdev), hw->chip_id);
+ dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
+ hw->chip_id);
return -EOPNOTSUPP;
}
@@ -3333,7 +3402,7 @@ static int skge_reset(struct skge_hw *hw)
/* avoid boards with stuck Hardware error bits */
if ((skge_read32(hw, B0_ISRC) & IS_HW_ERR) &&
(skge_read32(hw, B0_HWE_ISRC) & IS_IRQ_SENSOR)) {
- printk(KERN_WARNING PFX "stuck hardware sensor bit\n");
+ dev_warn(&hw->pdev->dev, "stuck hardware sensor bit\n");
hw->intr_mask &= ~IS_HW_ERR;
}
@@ -3407,7 +3476,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
struct net_device *dev = alloc_etherdev(sizeof(*skge));
if (!dev) {
- printk(KERN_ERR "skge etherdev alloc failed");
+ dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
return NULL;
}
@@ -3451,6 +3520,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
skge->duplex = -1;
skge->speed = -1;
skge->advertising = skge_supported_modes(hw);
+ skge->wol = pci_wake_enabled(hw->pdev) ? wol_supported(hw) : 0;
hw->dev[port] = dev;
@@ -3495,15 +3565,13 @@ static int __devinit skge_probe(struct pci_dev *pdev,
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_ERR PFX "%s cannot enable PCI device\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot enable PCI device\n");
goto err_out;
}
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
- printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot obtain PCI resources\n");
goto err_out_disable_pdev;
}
@@ -3518,8 +3586,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
}
if (err) {
- printk(KERN_ERR PFX "%s no usable DMA configuration\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_out_free_regions;
}
@@ -3537,8 +3604,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw) {
- printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot allocate hardware struct\n");
goto err_out_free_regions;
}
@@ -3549,8 +3615,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
if (!hw->regs) {
- printk(KERN_ERR PFX "%s: cannot map device registers\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot map device registers\n");
goto err_out_free_hw;
}
@@ -3566,23 +3631,19 @@ static int __devinit skge_probe(struct pci_dev *pdev,
if (!dev)
goto err_out_led_off;
- if (!is_valid_ether_addr(dev->dev_addr)) {
- printk(KERN_ERR PFX "%s: bad (zero?) ethernet address in rom\n",
- pci_name(pdev));
- err = -EIO;
- goto err_out_free_netdev;
- }
+ /* Some motherboards are broken and has zero in ROM. */
+ if (!is_valid_ether_addr(dev->dev_addr))
+ dev_warn(&pdev->dev, "bad (zero?) ethernet address in rom\n");
err = register_netdev(dev);
if (err) {
- printk(KERN_ERR PFX "%s: cannot register net device\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot register net device\n");
goto err_out_free_netdev;
}
err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, dev->name, hw);
if (err) {
- printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
+ dev_err(&pdev->dev, "%s: cannot assign irq %d\n",
dev->name, pdev->irq);
goto err_out_unregister;
}
@@ -3593,7 +3654,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
skge_show_addr(dev1);
else {
/* Failure to register second port need not be fatal */
- printk(KERN_WARNING PFX "register of second port failed\n");
+ dev_warn(&pdev->dev, "register of second port failed\n");
hw->dev[1] = NULL;
free_netdev(dev1);
}
@@ -3658,28 +3719,46 @@ static void __devexit skge_remove(struct pci_dev *pdev)
}
#ifdef CONFIG_PM
+static int vaux_avail(struct pci_dev *pdev)
+{
+ int pm_cap;
+
+ pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pm_cap) {
+ u16 ctl;
+ pci_read_config_word(pdev, pm_cap + PCI_PM_PMC, &ctl);
+ if (ctl & PCI_PM_CAP_AUX_POWER)
+ return 1;
+ }
+ return 0;
+}
+
+
static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct skge_hw *hw = pci_get_drvdata(pdev);
- int i, wol = 0;
+ int i, err, wol = 0;
+
+ err = pci_save_state(pdev);
+ if (err)
+ return err;
- pci_save_state(pdev);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
+ struct skge_port *skge = netdev_priv(dev);
- if (netif_running(dev)) {
- struct skge_port *skge = netdev_priv(dev);
+ if (netif_running(dev))
+ skge_down(dev);
+ if (skge->wol)
+ skge_wol_init(skge);
- netif_carrier_off(dev);
- if (skge->wol)
- netif_stop_queue(dev);
- else
- skge_down(dev);
- wol |= skge->wol;
- }
- netif_device_detach(dev);
+ wol |= skge->wol;
}
+ if (wol && vaux_avail(pdev))
+ skge_write8(hw, B0_POWER_CTRL,
+ PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF);
+
skge_write32(hw, B0_IMSK, 0);
pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
@@ -3692,8 +3771,14 @@ static int skge_resume(struct pci_dev *pdev)
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, err;
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
+ err = pci_set_power_state(pdev, PCI_D0);
+ if (err)
+ goto out;
+
+ err = pci_restore_state(pdev);
+ if (err)
+ goto out;
+
pci_enable_wake(pdev, PCI_D0, 0);
err = skge_reset(hw);
@@ -3703,7 +3788,6 @@ static int skge_resume(struct pci_dev *pdev)
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
- netif_device_attach(dev);
if (netif_running(dev)) {
err = skge_up(dev);