aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/sky2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sky2.c')
-rw-r--r--drivers/net/sky2.c42
1 files changed, 18 insertions, 24 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 67ecd66f26d..16616f5440d 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -10,8 +10,7 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -699,16 +698,10 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
}
-/* Assign Ram Buffer allocation.
- * start and end are in units of 4k bytes
- * ram registers are in units of 64bit words
- */
-static void sky2_ramset(struct sky2_hw *hw, u16 q, u8 startk, u8 endk)
+/* Assign Ram Buffer allocation in units of 64bit (8 bytes) */
+static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 end)
{
- u32 start, end;
-
- start = startk * 4096/8;
- end = (endk * 4096/8) - 1;
+ pr_debug(PFX "q %d %#x %#x\n", q, start, end);
sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
sky2_write32(hw, RB_ADDR(q, RB_START), start);
@@ -717,7 +710,7 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u8 startk, u8 endk)
sky2_write32(hw, RB_ADDR(q, RB_RP), start);
if (q == Q_R1 || q == Q_R2) {
- u32 space = (endk - startk) * 4096/8;
+ u32 space = end - start + 1;
u32 tp = space - space/4;
/* On receive queue's set the thresholds
@@ -1199,19 +1192,16 @@ static int sky2_up(struct net_device *dev)
sky2_mac_init(hw, port);
- /* Determine available ram buffer space (in 4K blocks).
- * Note: not sure about the FE setting below yet
- */
- if (hw->chip_id == CHIP_ID_YUKON_FE)
- ramsize = 4;
- else
- ramsize = sky2_read8(hw, B2_E_0);
+ /* Determine available ram buffer space in qwords. */
+ ramsize = sky2_read8(hw, B2_E_0) * 4096/8;
- /* Give transmitter one third (rounded up) */
- rxspace = ramsize - (ramsize + 2) / 3;
+ if (ramsize > 6*1024/8)
+ rxspace = ramsize - (ramsize + 2) / 3;
+ else
+ rxspace = ramsize / 2;
- sky2_ramset(hw, rxqaddr[port], 0, rxspace);
- sky2_ramset(hw, txqaddr[port], rxspace, ramsize);
+ sky2_ramset(hw, rxqaddr[port], 0, rxspace-1);
+ sky2_ramset(hw, txqaddr[port], rxspace, ramsize-1);
/* Make sure SyncQ is disabled */
sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
@@ -3248,7 +3238,11 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
dev->poll = sky2_poll;
dev->weight = NAPI_WEIGHT;
#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = sky2_netpoll;
+ /* Network console (only works on port 0)
+ * because netpoll makes assumptions about NAPI
+ */
+ if (port == 0)
+ dev->poll_controller = sky2_netpoll;
#endif
sky2 = netdev_priv(dev);