aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/smc9194.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/smc9194.c')
-rw-r--r--drivers/net/smc9194.c1631
1 files changed, 1631 insertions, 0 deletions
diff --git a/drivers/net/smc9194.c b/drivers/net/smc9194.c
new file mode 100644
index 00000000000..f86697da04d
--- /dev/null
+++ b/drivers/net/smc9194.c
@@ -0,0 +1,1631 @@
+/*------------------------------------------------------------------------
+ . smc9194.c
+ . This is a driver for SMC's 9000 series of Ethernet cards.
+ .
+ . Copyright (C) 1996 by Erik Stahlman
+ . This software may be used and distributed according to the terms
+ . of the GNU General Public License, incorporated herein by reference.
+ .
+ . "Features" of the SMC chip:
+ . 4608 byte packet memory. ( for the 91C92. Others have more )
+ . EEPROM for configuration
+ . AUI/TP selection ( mine has 10Base2/10BaseT select )
+ .
+ . Arguments:
+ . io = for the base address
+ . irq = for the IRQ
+ . ifport = 0 for autodetect, 1 for TP, 2 for AUI ( or 10base2 )
+ .
+ . author:
+ . Erik Stahlman ( erik@vt.edu )
+ . contributors:
+ . Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ .
+ . Hardware multicast code from Peter Cammaert ( pc@denkart.be )
+ .
+ . Sources:
+ . o SMC databook
+ . o skeleton.c by Donald Becker ( becker@scyld.com )
+ . o ( a LOT of advice from Becker as well )
+ .
+ . History:
+ . 12/07/95 Erik Stahlman written, got receive/xmit handled
+ . 01/03/96 Erik Stahlman worked out some bugs, actually usable!!! :-)
+ . 01/06/96 Erik Stahlman cleaned up some, better testing, etc
+ . 01/29/96 Erik Stahlman fixed autoirq, added multicast
+ . 02/01/96 Erik Stahlman 1. disabled all interrupts in smc_reset
+ . 2. got rid of post-decrementing bug -- UGH.
+ . 02/13/96 Erik Stahlman Tried to fix autoirq failure. Added more
+ . descriptive error messages.
+ . 02/15/96 Erik Stahlman Fixed typo that caused detection failure
+ . 02/23/96 Erik Stahlman Modified it to fit into kernel tree
+ . Added support to change hardware address
+ . Cleared stats on opens
+ . 02/26/96 Erik Stahlman Trial support for Kernel 1.2.13
+ . Kludge for automatic IRQ detection
+ . 03/04/96 Erik Stahlman Fixed kernel 1.3.70 +
+ . Fixed bug reported by Gardner Buchanan in
+ . smc_enable, with outw instead of outb
+ . 03/06/96 Erik Stahlman Added hardware multicast from Peter Cammaert
+ . 04/14/00 Heiko Pruessing (SMA Regelsysteme) Fixed bug in chip memory
+ . allocation
+ . 08/20/00 Arnaldo Melo fix kfree(skb) in smc_hardware_send_packet
+ . 12/15/00 Christian Jullien fix "Warning: kfree_skb on hard IRQ"
+ . 11/08/01 Matt Domsch Use common crc32 function
+ ----------------------------------------------------------------------------*/
+
+static const char version[] =
+ "smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)\n";
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+
+#include "smc9194.h"
+
+#define DRV_NAME "smc9194"
+
+/*------------------------------------------------------------------------
+ .
+ . Configuration options, for the experienced user to change.
+ .
+ -------------------------------------------------------------------------*/
+
+/*
+ . Do you want to use 32 bit xfers? This should work on all chips, as
+ . the chipset is designed to accommodate them.
+*/
+#ifdef __sh__
+#undef USE_32_BIT
+#else
+#define USE_32_BIT 1
+#endif
+
+#if defined(__H8300H__) || defined(__H8300S__)
+#define NO_AUTOPROBE
+#undef insl
+#undef outsl
+#define insl(a,b,l) io_insl_noswap(a,b,l)
+#define outsl(a,b,l) io_outsl_noswap(a,b,l)
+#endif
+
+/*
+ .the SMC9194 can be at any of the following port addresses. To change,
+ .for a slightly different card, you can add it to the array. Keep in
+ .mind that the array must end in zero.
+*/
+
+struct devlist {
+ unsigned int port;
+ unsigned int irq;
+};
+
+#if defined(CONFIG_H8S_EDOSK2674)
+static struct devlist smc_devlist[] __initdata = {
+ {.port = 0xf80000, .irq = 16},
+ {.port = 0, .irq = 0 },
+};
+#else
+static struct devlist smc_devlist[] __initdata = {
+ {.port = 0x200, .irq = 0},
+ {.port = 0x220, .irq = 0},
+ {.port = 0x240, .irq = 0},
+ {.port = 0x260, .irq = 0},
+ {.port = 0x280, .irq = 0},
+ {.port = 0x2A0, .irq = 0},
+ {.port = 0x2C0, .irq = 0},
+ {.port = 0x2E0, .irq = 0},
+ {.port = 0x300, .irq = 0},
+ {.port = 0x320, .irq = 0},
+ {.port = 0x340, .irq = 0},
+ {.port = 0x360, .irq = 0},
+ {.port = 0x380, .irq = 0},
+ {.port = 0x3A0, .irq = 0},
+ {.port = 0x3C0, .irq = 0},
+ {.port = 0x3E0, .irq = 0},
+ {.port = 0, .irq = 0},
+};
+#endif
+/*
+ . Wait time for memory to be free. This probably shouldn't be
+ . tuned that much, as waiting for this means nothing else happens
+ . in the system
+*/
+#define MEMORY_WAIT_TIME 16
+
+/*
+ . DEBUGGING LEVELS
+ .
+ . 0 for normal operation
+ . 1 for slightly more details
+ . >2 for various levels of increasingly useless information
+ . 2 for interrupt tracking, status flags
+ . 3 for packet dumps, etc.
+*/
+#define SMC_DEBUG 0
+
+#if (SMC_DEBUG > 2 )
+#define PRINTK3(x) printk x
+#else
+#define PRINTK3(x)
+#endif
+
+#if SMC_DEBUG > 1
+#define PRINTK2(x) printk x
+#else
+#define PRINTK2(x)
+#endif
+
+#ifdef SMC_DEBUG
+#define PRINTK(x) printk x
+#else
+#define PRINTK(x)
+#endif
+
+
+/*------------------------------------------------------------------------
+ .
+ . The internal workings of the driver. If you are changing anything
+ . here with the SMC stuff, you should have the datasheet and known
+ . what you are doing.
+ .
+ -------------------------------------------------------------------------*/
+#define CARDNAME "SMC9194"
+
+
+/* store this information for the driver.. */
+struct smc_local {
+ /*
+ these are things that the kernel wants me to keep, so users
+ can find out semi-useless statistics of how well the card is
+ performing
+ */
+ struct net_device_stats stats;
+
+ /*
+ If I have to wait until memory is available to send
+ a packet, I will store the skbuff here, until I get the
+ desired memory. Then, I'll send it out and free it.
+ */
+ struct sk_buff * saved_skb;
+
+ /*
+ . This keeps track of how many packets that I have
+ . sent out. When an TX_EMPTY interrupt comes, I know
+ . that all of these have been sent.
+ */
+ int packets_waiting;
+};
+
+
+/*-----------------------------------------------------------------
+ .
+ . The driver can be entered at any of the following entry points.
+ .
+ .------------------------------------------------------------------ */
+
+/*
+ . This is called by register_netdev(). It is responsible for
+ . checking the portlist for the SMC9000 series chipset. If it finds
+ . one, then it will initialize the device, find the hardware information,
+ . and sets up the appropriate device parameters.
+ . NOTE: Interrupts are *OFF* when this procedure is called.
+ .
+ . NB:This shouldn't be static since it is referred to externally.
+*/
+struct net_device *smc_init(int unit);
+
+/*
+ . The kernel calls this function when someone wants to use the device,
+ . typically 'ifconfig ethX up'.
+*/
+static int smc_open(struct net_device *dev);
+
+/*
+ . Our watchdog timed out. Called by the networking layer
+*/
+static void smc_timeout(struct net_device *dev);
+
+/*
+ . This is called by the kernel in response to 'ifconfig ethX down'. It
+ . is responsible for cleaning up everything that the open routine
+ . does, and maybe putting the card into a powerdown state.
+*/
+static int smc_close(struct net_device *dev);
+
+/*
+ . This routine allows the proc file system to query the driver's
+ . statistics.
+*/
+static struct net_device_stats * smc_query_statistics( struct net_device *dev);
+
+/*
+ . Finally, a call to set promiscuous mode ( for TCPDUMP and related
+ . programs ) and multicast modes.
+*/
+static void smc_set_multicast_list(struct net_device *dev);
+
+
+/*---------------------------------------------------------------
+ .
+ . Interrupt level calls..
+ .
+ ----------------------------------------------------------------*/
+
+/*
+ . Handles the actual interrupt
+*/
+static irqreturn_t smc_interrupt(int irq, void *, struct pt_regs *regs);
+/*
+ . This is a separate procedure to handle the receipt of a packet, to
+ . leave the interrupt code looking slightly cleaner
+*/
+static inline void smc_rcv( struct net_device *dev );
+/*
+ . This handles a TX interrupt, which is only called when an error
+ . relating to a packet is sent.
+*/
+static inline void smc_tx( struct net_device * dev );
+
+/*
+ ------------------------------------------------------------
+ .
+ . Internal routines
+ .
+ ------------------------------------------------------------
+*/
+
+/*
+ . Test if a given location contains a chip, trying to cause as
+ . little damage as possible if it's not a SMC chip.
+*/
+static int smc_probe(struct net_device *dev, int ioaddr);
+
+/*
+ . A rather simple routine to print out a packet for debugging purposes.
+*/
+#if SMC_DEBUG > 2
+static void print_packet( byte *, int );
+#endif
+
+#define tx_done(dev) 1
+
+/* this is called to actually send the packet to the chip */
+static void smc_hardware_send_packet( struct net_device * dev );
+
+/* Since I am not sure if I will have enough room in the chip's ram
+ . to store the packet, I call this routine, which either sends it
+ . now, or generates an interrupt when the card is ready for the
+ . packet */
+static int smc_wait_to_send_packet( struct sk_buff * skb, struct net_device *dev );
+
+/* this does a soft reset on the device */
+static void smc_reset( int ioaddr );
+
+/* Enable Interrupts, Receive, and Transmit */
+static void smc_enable( int ioaddr );
+
+/* this puts the device in an inactive state */
+static void smc_shutdown( int ioaddr );
+
+/* This routine will find the IRQ of the driver if one is not
+ . specified in the input to the device. */
+static int smc_findirq( int ioaddr );
+
+/*
+ . Function: smc_reset( int ioaddr )
+ . Purpose:
+ . This sets the SMC91xx chip to its normal state, hopefully from whatever
+ . mess that any other DOS driver has put it in.
+ .
+ . Maybe I should reset more registers to defaults in here? SOFTRESET should
+ . do that for me.
+ .
+ . Method:
+ . 1. send a SOFT RESET
+ . 2. wait for it to finish
+ . 3. enable autorelease mode
+ . 4. reset the memory management unit
+ . 5. clear all interrupts
+ .
+*/
+static void smc_reset( int ioaddr )
+{
+ /* This resets the registers mostly to defaults, but doesn't
+ affect EEPROM. That seems unnecessary */
+ SMC_SELECT_BANK( 0 );
+ outw( RCR_SOFTRESET, ioaddr + RCR );
+
+ /* this should pause enough for the chip to be happy */
+ SMC_DELAY( );
+
+ /* Set the transmit and receive configuration registers to
+ default values */
+ outw( RCR_CLEAR, ioaddr + RCR );
+ outw( TCR_CLEAR, ioaddr + TCR );
+
+ /* set the control register to automatically
+ release successfully transmitted packets, to make the best
+ use out of our limited memory */
+ SMC_SELECT_BANK( 1 );
+ outw( inw( ioaddr + CONTROL ) | CTL_AUTO_RELEASE , ioaddr + CONTROL );
+
+ /* Reset the MMU */
+ SMC_SELECT_BANK( 2 );
+ outw( MC_RESET, ioaddr + MMU_CMD );
+
+ /* Note: It doesn't seem that waiting for the MMU busy is needed here,
+ but this is a place where future chipsets _COULD_ break. Be wary
+ of issuing another MMU command right after this */
+
+ outb( 0, ioaddr + INT_MASK );
+}
+
+/*
+ . Function: smc_enable
+ . Purpose: let the chip talk to the outside work
+ . Method:
+ . 1. Enable the transmitter
+ . 2. Enable the receiver
+ . 3. Enable interrupts
+*/
+static void smc_enable( int ioaddr )
+{
+ SMC_SELECT_BANK( 0 );
+ /* see the header file for options in TCR/RCR NORMAL*/
+ outw( TCR_NORMAL, ioaddr + TCR );
+ outw( RCR_NORMAL, ioaddr + RCR );
+
+ /* now, enable interrupts */
+ SMC_SELECT_BANK( 2 );
+ outb( SMC_INTERRUPT_MASK, ioaddr + INT_MASK );
+}
+
+/*
+ . Function: smc_shutdown
+ . Purpose: closes down the SMC91xxx chip.
+ . Method:
+ . 1. zero the interrupt mask
+ . 2. clear the enable receive flag
+ . 3. clear the enable xmit flags
+ .
+ . TODO:
+ . (1) maybe utilize power down mode.
+ . Why not yet? Because while the chip will go into power down mode,
+ . the manual says that it will wake up in response to any I/O requests
+ . in the register space. Empirical results do not show this working.
+*/
+static void smc_shutdown( int ioaddr )
+{
+ /* no more interrupts for me */
+ SMC_SELECT_BANK( 2 );
+ outb( 0, ioaddr + INT_MASK );
+
+ /* and tell the card to stay away from that nasty outside world */
+ SMC_SELECT_BANK( 0 );
+ outb( RCR_CLEAR, ioaddr + RCR );
+ outb( TCR_CLEAR, ioaddr + TCR );
+#if 0
+ /* finally, shut the chip down */
+ SMC_SELECT_BANK( 1 );
+ outw( inw( ioaddr + CONTROL ), CTL_POWERDOWN, ioaddr + CONTROL );
+#endif
+}
+
+
+/*
+ . Function: smc_setmulticast( int ioaddr, int count, dev_mc_list * adds )
+ . Purpose:
+ . This sets the internal hardware table to filter out unwanted multicast
+ . packets before they take up memory.
+ .
+ . The SMC chip uses a hash table where the high 6 bits of the CRC of
+ . address are the offset into the table. If that bit is 1, then the
+ . multicast packet is accepted. Otherwise, it's dropped silently.
+ .
+ . To use the 6 bits as an offset into the table, the high 3 bits are the
+ . number of the 8 bit register, while the low 3 bits are the bit within
+ . that register.
+ .
+ . This routine is based very heavily on the one provided by Peter Cammaert.
+*/
+
+
+static void smc_setmulticast( int ioaddr, int count, struct dev_mc_list * addrs ) {
+ int i;
+ unsigned char multicast_table[ 8 ];
+ struct dev_mc_list * cur_addr;
+ /* table for flipping the order of 3 bits */
+ unsigned char invert3[] = { 0, 4, 2, 6, 1, 5, 3, 7 };
+
+ /* start with a table of all zeros: reject all */
+ memset( multicast_table, 0, sizeof( multicast_table ) );
+
+ cur_addr = addrs;
+ for ( i = 0; i < count ; i ++, cur_addr = cur_addr->next ) {
+ int position;
+
+ /* do we have a pointer here? */
+ if ( !cur_addr )
+ break;
+ /* make sure this is a multicast address - shouldn't this
+ be a given if we have it here ? */
+ if ( !( *cur_addr->dmi_addr & 1 ) )
+ continue;
+
+ /* only use the low order bits */
+ position = ether_crc_le(6, cur_addr->dmi_addr) & 0x3f;
+
+ /* do some messy swapping to put the bit in the right spot */
+ multicast_table[invert3[position&7]] |=
+ (1<<invert3[(position>>3)&7]);
+
+ }
+ /* now, the table can be loaded into the chipset */
+ SMC_SELECT_BANK( 3 );
+
+ for ( i = 0; i < 8 ; i++ ) {
+ outb( multicast_table[i], ioaddr + MULTICAST1 + i );
+ }
+}
+
+/*
+ . Function: smc_wait_to_send_packet( struct sk_buff * skb, struct net_device * )
+ . Purpose:
+ . Attempt to allocate memory for a packet, if chip-memory is not
+ . available, then tell the card to generate an interrupt when it
+ . is available.
+ .
+ . Algorithm:
+ .
+ . o if the saved_skb is not currently null, then drop this packet
+ . on the floor. This should never happen, because of TBUSY.
+ . o if the saved_skb is null, then replace it with the current packet,
+ . o See if I can sending it now.
+ . o (NO): Enable interrupts and let the interrupt handler deal with it.
+ . o (YES):Send it now.
+*/
+static int smc_wait_to_send_packet( struct sk_buff * skb, struct net_device * dev )
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned int ioaddr = dev->base_addr;
+ word length;
+ unsigned short numPages;
+ word time_out;
+
+ netif_stop_queue(dev);
+ /* Well, I want to send the packet.. but I don't know
+ if I can send it right now... */
+
+ if ( lp->saved_skb) {
+ /* THIS SHOULD NEVER HAPPEN. */
+ lp->stats.tx_aborted_errors++;
+ printk(CARDNAME": Bad Craziness - sent packet while busy.\n" );
+ return 1;
+ }
+ lp->saved_skb = skb;
+
+ length = skb->len;
+
+ if (length < ETH_ZLEN) {
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (skb == NULL) {
+ netif_wake_queue(dev);
+ return 0;
+ }
+ length = ETH_ZLEN;
+ }
+
+ /*
+ ** The MMU wants the number of pages to be the number of 256 bytes
+ ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
+ **
+ ** Pkt size for allocating is data length +6 (for additional status words,
+ ** length and ctl!) If odd size last byte is included in this header.
+ */
+ numPages = ((length & 0xfffe) + 6) / 256;
+
+ if (numPages > 7 ) {
+ printk(CARDNAME": Far too big packet error. \n");
+ /* freeing the packet is a good thing here... but should
+ . any packets of this size get down here? */
+ dev_kfree_skb (skb);
+ lp->saved_skb = NULL;
+ /* this IS an error, but, i don't want the skb saved */
+ netif_wake_queue(dev);
+ return 0;
+ }
+ /* either way, a packet is waiting now */
+ lp->packets_waiting++;
+
+ /* now, try to allocate the memory */
+ SMC_SELECT_BANK( 2 );
+ outw( MC_ALLOC | numPages, ioaddr + MMU_CMD );
+ /*
+ . Performance Hack
+ .
+ . wait a short amount of time.. if I can send a packet now, I send
+ . it now. Otherwise, I enable an interrupt and wait for one to be
+ . available.
+ .
+ . I could have handled this a slightly different way, by checking to
+ . see if any memory was available in the FREE MEMORY register. However,
+ . either way, I need to generate an allocation, and the allocation works
+ . no matter what, so I saw no point in checking free memory.
+ */
+ time_out = MEMORY_WAIT_TIME;
+ do {
+ word status;
+
+ status = inb( ioaddr + INTERRUPT );
+ if ( status & IM_ALLOC_INT ) {
+ /* acknowledge the interrupt */
+ outb( IM_ALLOC_INT, ioaddr + INTERRUPT );
+ break;
+ }
+ } while ( -- time_out );
+
+ if ( !time_out ) {
+ /* oh well, wait until the chip finds memory later */
+ SMC_ENABLE_INT( IM_ALLOC_INT );
+ PRINTK2((CARDNAME": memory allocation deferred. \n"));
+ /* it's deferred, but I'll handle it later */
+ return 0;
+ }
+ /* or YES! I can send the packet now.. */
+ smc_hardware_send_packet(dev);
+ netif_wake_queue(dev);
+ return 0;
+}
+
+/*
+ . Function: smc_hardware_send_packet(struct net_device * )
+ . Purpose:
+ . This sends the actual packet to the SMC9xxx chip.
+ .
+ . Algorithm:
+ . First, see if a saved_skb is available.
+ . ( this should NOT be called if there is no 'saved_skb'
+ . Now, find the packet number that the chip allocated
+ . Point the data pointers at it in memory
+ . Set the length word in the chip's memory
+ . Dump the packet to chip memory
+ . Check if a last byte is needed ( odd length packet )
+ . if so, set the control flag right
+ . Tell the card to send it
+ . Enable the transmit interrupt, so I know if it failed
+ . Free the kernel data if I actually sent it.
+*/
+static void smc_hardware_send_packet( struct net_device * dev )
+{
+ struct smc_local *lp = netdev_priv(dev);
+ byte packet_no;
+ struct sk_buff * skb = lp->saved_skb;
+ word length;
+ unsigned int ioaddr;
+ byte * buf;
+
+ ioaddr = dev->base_addr;
+
+ if ( !skb ) {
+ PRINTK((CARDNAME": In XMIT with no packet to send \n"));
+ return;
+ }
+ length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+ buf = skb->data;
+
+ /* If I get here, I _know_ there is a packet slot waiting for me */
+ packet_no = inb( ioaddr + PNR_ARR + 1 );
+ if ( packet_no & 0x80 ) {
+ /* or isn't there? BAD CHIP! */
+ printk(KERN_DEBUG CARDNAME": Memory allocation failed. \n");
+ dev_kfree_skb_any(skb);
+ lp->saved_skb = NULL;
+ netif_wake_queue(dev);
+ return;
+ }
+
+ /* we have a packet address, so tell the card to use it */
+ outb( packet_no, ioaddr + PNR_ARR );
+
+ /* point to the beginning of the packet */
+ outw( PTR_AUTOINC , ioaddr + POINTER );
+
+ PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length ));
+#if SMC_DEBUG > 2
+ print_packet( buf, length );
+#endif
+
+ /* send the packet length ( +6 for status, length and ctl byte )
+ and the status word ( set to zeros ) */
+#ifdef USE_32_BIT
+ outl( (length +6 ) << 16 , ioaddr + DATA_1 );
+#else
+ outw( 0, ioaddr + DATA_1 );
+ /* send the packet length ( +6 for status words, length, and ctl*/
+ outb( (length+6) & 0xFF,ioaddr + DATA_1 );
+ outb( (length+6) >> 8 , ioaddr + DATA_1 );
+#endif
+
+ /* send the actual data
+ . I _think_ it's faster to send the longs first, and then
+ . mop up by sending the last word. It depends heavily
+ . on alignment, at least on the 486. Maybe it would be
+ . a good idea to check which is optimal? But that could take
+ . almost as much time as is saved?
+ */
+#ifdef USE_32_BIT
+ if ( length & 0x2 ) {
+ outsl(ioaddr + DATA_1, buf, length >> 2 );
+#if !defined(__H8300H__) && !defined(__H8300S__)
+ outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
+#else
+ ctrl_outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
+#endif
+ }
+ else
+ outsl(ioaddr + DATA_1, buf, length >> 2 );
+#else
+ outsw(ioaddr + DATA_1 , buf, (length ) >> 1);
+#endif
+ /* Send the last byte, if there is one. */
+
+ if ( (length & 1) == 0 ) {
+ outw( 0, ioaddr + DATA_1 );
+ } else {
+ outb( buf[length -1 ], ioaddr + DATA_1 );
+ outb( 0x20, ioaddr + DATA_1);
+ }
+
+ /* enable the interrupts */
+ SMC_ENABLE_INT( (IM_TX_INT | IM_TX_EMPTY_INT) );
+
+ /* and let the chipset deal with it */
+ outw( MC_ENQUEUE , ioaddr + MMU_CMD );
+
+ PRINTK2((CARDNAME": Sent packet of length %d \n",length));
+
+ lp->saved_skb = NULL;
+ dev_kfree_skb_any (skb);
+
+ dev->trans_start = jiffies;
+
+ /* we can send another packet */
+ netif_wake_queue(dev);
+
+ return;
+}
+
+/*-------------------------------------------------------------------------
+ |
+ | smc_init(int unit)
+ | Input parameters:
+ | dev->base_addr == 0, try to find all possible locations
+ | dev->base_addr == 1, return failure code
+ | dev->base_addr == 2, always allocate space, and return success
+ | dev->base_addr == <anything else> this is the address to check
+ |
+ | Output:
+ | pointer to net_device or ERR_PTR(error)
+ |
+ ---------------------------------------------------------------------------
+*/
+static int io;
+static int irq;
+static int ifport;
+
+struct net_device * __init smc_init(int unit)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct smc_local));
+ static struct devlist *smcdev = smc_devlist;
+ int err = 0;
+
+#ifndef NO_AUTOPROBE
+ smcdev = smc_devlist;
+#endif
+ if (!dev)
+ return ERR_PTR(-ENODEV);
+
+ if (unit >= 0) {
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+ io = dev->base_addr;
+ irq = dev->irq;
+ }
+
+ SET_MODULE_OWNER(dev);
+
+ if (io > 0x1ff) { /* Check a single specified location. */
+ err = smc_probe(dev, io);
+ } else if (io != 0) { /* Don't probe at all. */
+ err = -ENXIO;
+ } else {
+ for (;smcdev->port; smcdev++) {
+ if (smc_probe(dev, smcdev->port) == 0)
+ break;
+ }
+ if (!smcdev->port)
+ err = -ENODEV;
+ }
+ if (err)
+ goto out;
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ return dev;
+out1:
+ free_irq(dev->irq, dev);
+ release_region(dev->base_addr, SMC_IO_EXTENT);
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+
+/*----------------------------------------------------------------------
+ . smc_findirq
+ .
+ . This routine has a simple purpose -- make the SMC chip generate an
+ . interrupt, so an auto-detect routine can detect it, and find the IRQ,
+ ------------------------------------------------------------------------
+*/
+int __init smc_findirq( int ioaddr )
+{
+#ifndef NO_AUTOPROBE
+ int timeout = 20;
+ unsigned long cookie;
+
+
+ cookie = probe_irq_on();
+
+ /*
+ * What I try to do here is trigger an ALLOC_INT. This is done
+ * by allocating a small chunk of memory, which will give an interrupt
+ * when done.
+ */
+
+
+ SMC_SELECT_BANK(2);
+ /* enable ALLOCation interrupts ONLY */
+ outb( IM_ALLOC_INT, ioaddr + INT_MASK );
+
+ /*
+ . Allocate 512 bytes of memory. Note that the chip was just
+ . reset so all the memory is available
+ */
+ outw( MC_ALLOC | 1, ioaddr + MMU_CMD );
+
+ /*
+ . Wait until positive that the interrupt has been generated
+ */
+ while ( timeout ) {
+ byte int_status;
+
+ int_status = inb( ioaddr + INTERRUPT );
+
+ if ( int_status & IM_ALLOC_INT )
+ break; /* got the interrupt */
+ timeout--;
+ }
+ /* there is really nothing that I can do here if timeout fails,
+ as probe_irq_off will return a 0 anyway, which is what I
+ want in this case. Plus, the clean up is needed in both
+ cases. */
+
+ /* DELAY HERE!
+ On a fast machine, the status might change before the interrupt
+ is given to the processor. This means that the interrupt was
+ never detected, and probe_irq_off fails to report anything.
+ This should fix probe_irq_* problems.
+ */
+ SMC_DELAY();
+ SMC_DELAY();
+
+ /* and disable all interrupts again */
+ outb( 0, ioaddr + INT_MASK );
+
+ /* and return what I found */
+ return probe_irq_off(cookie);
+#else /* NO_AUTOPROBE */
+ struct devlist *smcdev;
+ for (smcdev = smc_devlist; smcdev->port; smcdev++) {
+ if (smcdev->port == ioaddr)
+ return smcdev->irq;
+ }
+ return 0;
+#endif
+}
+
+/*----------------------------------------------------------------------
+ . Function: smc_probe( int ioaddr )
+ .
+ . Purpose:
+ . Tests to see if a given ioaddr points to an SMC9xxx chip.
+ . Returns a 0 on success
+ .
+ . Algorithm:
+ . (1) see if the high byte of BANK_SELECT is 0x33
+ . (2) compare the ioaddr with the base register's address
+ . (3) see if I recognize the chip ID in the appropriate register
+ .
+ .---------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------
+ . Here I do typical initialization tasks.
+ .
+ . o Initialize the structure if needed
+ . o print out my vanity message if not done so already
+ . o print out what type of hardware is detected
+ . o print out the ethernet address
+ . o find the IRQ
+ . o set up my private data
+ . o configure the dev structure with my subroutines
+ . o actually GRAB the irq.
+ . o GRAB the region
+ .-----------------------------------------------------------------
+*/
+static int __init smc_probe(struct net_device *dev, int ioaddr)
+{
+ int i, memory, retval;
+ static unsigned version_printed;
+ unsigned int bank;
+
+ const char *version_string;
+ const char *if_string;
+
+ /* registers */
+ word revision_register;
+ word base_address_register;
+ word configuration_register;
+ word memory_info_register;
+ word memory_cfg_register;
+
+ /* Grab the region so that no one else tries to probe our ioports. */
+ if (!request_region(ioaddr, SMC_IO_EXTENT, DRV_NAME))
+ return -EBUSY;
+
+ dev->irq = irq;
+ dev->if_port = ifport;
+
+ /* First, see if the high byte is 0x33 */
+ bank = inw( ioaddr + BANK_SELECT );
+ if ( (bank & 0xFF00) != 0x3300 ) {
+ retval = -ENODEV;
+ goto err_out;
+ }
+ /* The above MIGHT indicate a device, but I need to write to further
+ test this. */
+ outw( 0x0, ioaddr + BANK_SELECT );
+ bank = inw( ioaddr + BANK_SELECT );
+ if ( (bank & 0xFF00 ) != 0x3300 ) {
+ retval = -ENODEV;
+ goto err_out;
+ }
+#if !defined(CONFIG_H8S_EDOSK2674)
+ /* well, we've already written once, so hopefully another time won't
+ hurt. This time, I need to switch the bank register to bank 1,
+ so I can access the base address register */
+ SMC_SELECT_BANK(1);
+ base_address_register = inw( ioaddr + BASE );
+ if ( ioaddr != ( base_address_register >> 3 & 0x3E0 ) ) {
+ printk(CARDNAME ": IOADDR %x doesn't match configuration (%x)."
+ "Probably not a SMC chip\n",
+ ioaddr, base_address_register >> 3 & 0x3E0 );
+ /* well, the base address register didn't match. Must not have
+ been a SMC chip after all. */
+ retval = -ENODEV;
+ goto err_out;
+ }
+#else
+ (void)base_address_register; /* Warning suppression */
+#endif
+
+
+ /* check if the revision register is something that I recognize.
+ These might need to be added to later, as future revisions
+ could be added. */
+ SMC_SELECT_BANK(3);
+ revision_register = inw( ioaddr + REVISION );
+ if ( !chip_ids[ ( revision_register >> 4 ) & 0xF ] ) {
+ /* I don't recognize this chip, so... */
+ printk(CARDNAME ": IO %x: Unrecognized revision register:"
+ " %x, Contact author. \n", ioaddr, revision_register );
+
+ retval = -ENODEV;
+ goto err_out;
+ }
+
+ /* at this point I'll assume that the chip is an SMC9xxx.
+ It might be prudent to check a listing of MAC addresses
+ against the hardware address, or do some other tests. */
+
+ if (version_printed++ == 0)
+ printk("%s", version);
+
+ /* fill in some of the fields */
+ dev->base_addr = ioaddr;
+
+ /*
+ . Get the MAC address ( bank 1, regs 4 - 9 )
+ */
+ SMC_SELECT_BANK( 1 );
+ for ( i = 0; i < 6; i += 2 ) {
+ word address;
+
+ address = inw( ioaddr + ADDR0 + i );
+ dev->dev_addr[ i + 1] = address >> 8;
+ dev->dev_addr[ i ] = address & 0xFF;
+ }
+
+ /* get the memory information */
+
+ SMC_SELECT_BANK( 0 );
+ memory_info_register = inw( ioaddr + MIR );
+ memory_cfg_register = inw( ioaddr + MCR );
+ memory = ( memory_cfg_register >> 9 ) & 0x7; /* multiplier */
+ memory *= 256 * ( memory_info_register & 0xFF );
+
+ /*
+ Now, I want to find out more about the chip. This is sort of
+ redundant, but it's cleaner to have it in both, rather than having
+ one VERY long probe procedure.
+ */
+ SMC_SELECT_BANK(3);
+ revision_register = inw( ioaddr + REVISION );
+ version_string = chip_ids[ ( revision_register >> 4 ) & 0xF ];
+ if ( !version_string ) {
+ /* I shouldn't get here because this call was done before.... */
+ retval = -ENODEV;
+ goto err_out;
+ }
+
+ /* is it using AUI or 10BaseT ? */
+ if ( dev->if_port == 0 ) {
+ SMC_SELECT_BANK(1);
+ configuration_register = inw( ioaddr + CONFIG );
+ if ( configuration_register & CFG_AUI_SELECT )
+ dev->if_port = 2;
+ else
+ dev->if_port = 1;
+ }
+ if_string = interfaces[ dev->if_port - 1 ];
+
+ /* now, reset the chip, and put it into a known state */
+ smc_reset( ioaddr );
+
+ /*
+ . If dev->irq is 0, then the device has to be banged on to see
+ . what the IRQ is.
+ .
+ . This banging doesn't always detect the IRQ, for unknown reasons.
+ . a workaround is to reset the chip and try again.
+ .
+ . Interestingly, the DOS packet driver *SETS* the IRQ on the card to
+ . be what is requested on the command line. I don't do that, mostly
+ . because the card that I have uses a non-standard method of accessing
+ . the IRQs, and because this _should_ work in most configurations.
+ .
+ . Specifying an IRQ is done with the assumption that the user knows
+ . what (s)he is doing. No checking is done!!!!
+ .
+ */
+ if ( dev->irq < 2 ) {
+ int trials;
+
+ trials = 3;
+ while ( trials-- ) {
+ dev->irq = smc_findirq( ioaddr );
+ if ( dev->irq )
+ break;
+ /* kick the card and try again */
+ smc_reset( ioaddr );
+ }
+ }
+ if (dev->irq == 0 ) {
+ printk(CARDNAME": Couldn't autodetect your IRQ. Use irq=xx.\n");
+ retval = -ENODEV;
+ goto err_out;
+ }
+
+ /* now, print out the card info, in a short format.. */
+
+ printk("%s: %s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ", dev->name,
+ version_string, revision_register & 0xF, ioaddr, dev->irq,
+ if_string, memory );
+ /*
+ . Print the Ethernet address
+ */
+ printk("ADDR: ");
+ for (i = 0; i < 5; i++)
+ printk("%2.2x:", dev->dev_addr[i] );
+ printk("%2.2x \n", dev->dev_addr[5] );
+
+ /* set the private data to zero by default */
+ memset(dev->priv, 0, sizeof(struct smc_local));
+
+ /* Grab the IRQ */
+ retval = request_irq(dev->irq, &smc_interrupt, 0, DRV_NAME, dev);
+ if (retval) {
+ printk("%s: unable to get IRQ %d (irqval=%d).\n", DRV_NAME,
+ dev->irq, retval);
+ goto err_out;
+ }
+
+ dev->open = smc_open;
+ dev->stop = smc_close;
+ dev->hard_start_xmit = smc_wait_to_send_packet;
+ dev->tx_timeout = smc_timeout;
+ dev->watchdog_timeo = HZ/20;
+ dev->get_stats = smc_query_statistics;
+ dev->set_multicast_list = smc_set_multicast_list;
+
+ return 0;
+
+err_out:
+ release_region(ioaddr, SMC_IO_EXTENT);
+ return retval;
+}
+
+#if SMC_DEBUG > 2
+static void print_packet( byte * buf, int length )
+{
+#if 0
+ int i;
+ int remainder;
+ int lines;
+
+ printk("Packet of length %d \n", length );
+ lines = length / 16;
+ remainder = length % 16;
+
+ for ( i = 0; i < lines ; i ++ ) {
+ int cur;
+
+ for ( cur = 0; cur < 8; cur ++ ) {
+ byte a, b;
+
+ a = *(buf ++ );
+ b = *(buf ++ );
+ printk("%02x%02x ", a, b );
+ }
+ printk("\n");
+ }
+ for ( i = 0; i < remainder/2 ; i++ ) {
+ byte a, b;
+
+ a = *(buf ++ );
+ b = *(buf ++ );
+ printk("%02x%02x ", a, b );
+ }
+ printk("\n");
+#endif
+}
+#endif
+
+
+/*
+ * Open and Initialize the board
+ *
+ * Set up everything, reset the card, etc ..
+ *
+ */
+static int smc_open(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+
+ int i; /* used to set hw ethernet address */
+
+ /* clear out all the junk that was put here before... */
+ memset(dev->priv, 0, sizeof(struct smc_local));
+
+ /* reset the hardware */
+
+ smc_reset( ioaddr );
+ smc_enable( ioaddr );
+
+ /* Select which interface to use */
+
+ SMC_SELECT_BANK( 1 );
+ if ( dev->if_port == 1 ) {
+ outw( inw( ioaddr + CONFIG ) & ~CFG_AUI_SELECT,
+ ioaddr + CONFIG );
+ }
+ else if ( dev->if_port == 2 ) {
+ outw( inw( ioaddr + CONFIG ) | CFG_AUI_SELECT,
+ ioaddr + CONFIG );
+ }
+
+ /*
+ According to Becker, I have to set the hardware address
+ at this point, because the (l)user can set it with an
+ ioctl. Easily done...
+ */
+ SMC_SELECT_BANK( 1 );
+ for ( i = 0; i < 6; i += 2 ) {
+ word address;
+
+ address = dev->dev_addr[ i + 1 ] << 8 ;
+ address |= dev->dev_addr[ i ];
+ outw( address, ioaddr + ADDR0 + i );
+ }
+
+ netif_start_queue(dev);
+ return 0;
+}
+
+/*--------------------------------------------------------
+ . Called by the kernel to send a packet out into the void
+ . of the net. This routine is largely based on
+ . skeleton.c, from Becker.
+ .--------------------------------------------------------
+*/
+
+static void smc_timeout(struct net_device *dev)
+{
+ /* If we get here, some higher level has decided we are broken.
+ There should really be a "kick me" function call instead. */
+ printk(KERN_WARNING CARDNAME": transmit timed out, %s?\n",
+ tx_done(dev) ? "IRQ conflict" :
+ "network cable problem");
+ /* "kick" the adaptor */
+ smc_reset( dev->base_addr );
+ smc_enable( dev->base_addr );
+ dev->trans_start = jiffies;
+ /* clear anything saved */
+ ((struct smc_local *)dev->priv)->saved_skb = NULL;
+ netif_wake_queue(dev);
+}
+
+/*-------------------------------------------------------------
+ .
+ . smc_rcv - receive a packet from the card
+ .
+ . There is ( at least ) a packet waiting to be read from
+ . chip-memory.
+ .
+ . o Read the status
+ . o If an error, record it
+ . o otherwise, read in the packet
+ --------------------------------------------------------------
+*/
+static void smc_rcv(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ int packet_number;
+ word status;
+ word packet_length;
+
+ /* assume bank 2 */
+
+ packet_number = inw( ioaddr + FIFO_PORTS );
+
+ if ( packet_number & FP_RXEMPTY ) {
+ /* we got called , but nothing was on the FIFO */
+ PRINTK((CARDNAME ": WARNING: smc_rcv with nothing on FIFO. \n"));
+ /* don't need to restore anything */
+ return;
+ }
+
+ /* start reading from the start of the packet */
+ outw( PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER );
+
+ /* First two words are status and packet_length */
+ status = inw( ioaddr + DATA_1 );
+ packet_length = inw( ioaddr + DATA_1 );
+
+ packet_length &= 0x07ff; /* mask off top bits */
+
+ PRINTK2(("RCV: STATUS %4x LENGTH %4x\n", status, packet_length ));
+ /*
+ . the packet length contains 3 extra words :
+ . status, length, and an extra word with an odd byte .
+ */
+ packet_length -= 6;
+
+ if ( !(status & RS_ERRORS ) ){
+ /* do stuff to make a new packet */
+ struct sk_buff * skb;
+ byte * data;
+
+ /* read one extra byte */
+ if ( status & RS_ODDFRAME )
+ packet_length++;
+
+ /* set multicast stats */
+ if ( status & RS_MULTICAST )
+ lp->stats.multicast++;
+
+ skb = dev_alloc_skb( packet_length + 5);
+
+ if ( skb == NULL ) {
+ printk(KERN_NOTICE CARDNAME ": Low memory, packet dropped.\n");
+ lp->stats.rx_dropped++;
+ goto done;
+ }
+
+ /*
+ ! This should work without alignment, but it could be
+ ! in the worse case
+ */
+
+ skb_reserve( skb, 2 ); /* 16 bit alignment */
+
+ skb->dev = dev;
+ data = skb_put( skb, packet_length);
+
+#ifdef USE_32_BIT
+ /* QUESTION: Like in the TX routine, do I want
+ to send the DWORDs or the bytes first, or some
+ mixture. A mixture might improve already slow PIO
+ performance */
+ PRINTK3((" Reading %d dwords (and %d bytes) \n",
+ packet_length >> 2, packet_length & 3 ));
+ insl(ioaddr + DATA_1 , data, packet_length >> 2 );
+ /* read the left over bytes */
+ insb( ioaddr + DATA_1, data + (packet_length & 0xFFFFFC),
+ packet_length & 0x3 );
+#else
+ PRINTK3((" Reading %d words and %d byte(s) \n",
+ (packet_length >> 1 ), packet_length & 1 ));
+ insw(ioaddr + DATA_1 , data, packet_length >> 1);
+ if ( packet_length & 1 ) {
+ data += packet_length & ~1;
+ *(data++) = inb( ioaddr + DATA_1 );
+ }
+#endif
+#if SMC_DEBUG > 2
+ print_packet( data, packet_length );
+#endif
+
+ skb->protocol = eth_type_trans(skb, dev );
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += packet_length;
+ } else {
+ /* error ... */
+ lp->stats.rx_errors++;
+
+ if ( status & RS_ALGNERR ) lp->stats.rx_frame_errors++;
+ if ( status & (RS_TOOSHORT | RS_TOOLONG ) )
+ lp->stats.rx_length_errors++;
+ if ( status & RS_BADCRC) lp->stats.rx_crc_errors++;
+ }
+
+done:
+ /* error or good, tell the card to get rid of this packet */
+ outw( MC_RELEASE, ioaddr + MMU_CMD );
+}
+
+
+/*************************************************************************
+ . smc_tx
+ .
+ . Purpose: Handle a transmit error message. This will only be called
+ . when an error, because of the AUTO_RELEASE mode.
+ .
+ . Algorithm:
+ . Save pointer and packet no
+ . Get the packet no from the top of the queue
+ . check if it's valid ( if not, is this an error??? )
+ . read the status word
+ . record the error
+ . ( resend? Not really, since we don't want old packets around )
+ . Restore saved values
+ ************************************************************************/
+static void smc_tx( struct net_device * dev )
+{
+ int ioaddr = dev->base_addr;
+ struct smc_local *lp = netdev_priv(dev);
+ byte saved_packet;
+ byte packet_no;
+ word tx_status;
+
+
+ /* assume bank 2 */
+
+ saved_packet = inb( ioaddr + PNR_ARR );
+ packet_no = inw( ioaddr + FIFO_PORTS );
+ packet_no &= 0x7F;
+
+ /* select this as the packet to read from */
+ outb( packet_no, ioaddr + PNR_ARR );
+
+ /* read the first word from this packet */
+ outw( PTR_AUTOINC | PTR_READ, ioaddr + POINTER );
+
+ tx_status = inw( ioaddr + DATA_1 );
+ PRINTK3((CARDNAME": TX DONE STATUS: %4x \n", tx_status ));
+
+ lp->stats.tx_errors++;
+ if ( tx_status & TS_LOSTCAR ) lp->stats.tx_carrier_errors++;
+ if ( tx_status & TS_LATCOL ) {
+ printk(KERN_DEBUG CARDNAME
+ ": Late collision occurred on last xmit.\n");
+ lp->stats.tx_window_errors++;
+ }
+#if 0
+ if ( tx_status & TS_16COL ) { ... }
+#endif
+
+ if ( tx_status & TS_SUCCESS ) {
+ printk(CARDNAME": Successful packet caused interrupt \n");
+ }
+ /* re-enable transmit */
+ SMC_SELECT_BANK( 0 );
+ outw( inw( ioaddr + TCR ) | TCR_ENABLE, ioaddr + TCR );
+
+ /* kill the packet */
+ SMC_SELECT_BANK( 2 );
+ outw( MC_FREEPKT, ioaddr + MMU_CMD );
+
+ /* one less packet waiting for me */
+ lp->packets_waiting--;
+
+ outb( saved_packet, ioaddr + PNR_ARR );
+ return;
+}
+
+/*--------------------------------------------------------------------
+ .
+ . This is the main routine of the driver, to handle the device when
+ . it needs some attention.
+ .
+ . So:
+ . first, save state of the chipset
+ . branch off into routines to handle each case, and acknowledge
+ . each to the interrupt register
+ . and finally restore state.
+ .
+ ---------------------------------------------------------------------*/
+
+static irqreturn_t smc_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+{
+ struct net_device *dev = dev_id;
+ int ioaddr = dev->base_addr;
+ struct smc_local *lp = netdev_priv(dev);
+
+ byte status;
+ word card_stats;
+ byte mask;
+ int timeout;
+ /* state registers */
+ word saved_bank;
+ word saved_pointer;
+ int handled = 0;
+
+
+ PRINTK3((CARDNAME": SMC interrupt started \n"));
+
+ saved_bank = inw( ioaddr + BANK_SELECT );
+
+ SMC_SELECT_BANK(2);
+ saved_pointer = inw( ioaddr + POINTER );
+
+ mask = inb( ioaddr + INT_MASK );
+ /* clear all interrupts */
+ outb( 0, ioaddr + INT_MASK );
+
+
+ /* set a timeout value, so I don't stay here forever */
+ timeout = 4;
+
+ PRINTK2((KERN_WARNING CARDNAME ": MASK IS %x \n", mask ));
+ do {
+ /* read the status flag, and mask it */
+ status = inb( ioaddr + INTERRUPT ) & mask;
+ if (!status )
+ break;
+
+ handled = 1;
+
+ PRINTK3((KERN_WARNING CARDNAME
+ ": Handling interrupt status %x \n", status ));
+
+ if (status & IM_RCV_INT) {
+ /* Got a packet(s). */
+ PRINTK2((KERN_WARNING CARDNAME
+ ": Receive Interrupt\n"));
+ smc_rcv(dev);
+ } else if (status & IM_TX_INT ) {
+ PRINTK2((KERN_WARNING CARDNAME
+ ": TX ERROR handled\n"));
+ smc_tx(dev);
+ outb(IM_TX_INT, ioaddr + INTERRUPT );
+ } else if (status & IM_TX_EMPTY_INT ) {
+ /* update stats */
+ SMC_SELECT_BANK( 0 );
+ card_stats = inw( ioaddr + COUNTER );
+ /* single collisions */
+ lp->stats.collisions += card_stats & 0xF;
+ card_stats >>= 4;
+ /* multiple collisions */
+ lp->stats.collisions += card_stats & 0xF;
+
+ /* these are for when linux supports these statistics */
+
+ SMC_SELECT_BANK( 2 );
+ PRINTK2((KERN_WARNING CARDNAME
+ ": TX_BUFFER_EMPTY handled\n"));
+ outb( IM_TX_EMPTY_INT, ioaddr + INTERRUPT );
+ mask &= ~IM_TX_EMPTY_INT;
+ lp->stats.tx_packets += lp->packets_waiting;
+ lp->packets_waiting = 0;
+
+ } else if (status & IM_ALLOC_INT ) {
+ PRINTK2((KERN_DEBUG CARDNAME
+ ": Allocation interrupt \n"));
+ /* clear this interrupt so it doesn't happen again */
+ mask &= ~IM_ALLOC_INT;
+
+ smc_hardware_send_packet( dev );
+
+ /* enable xmit interrupts based on this */
+ mask |= ( IM_TX_EMPTY_INT | IM_TX_INT );
+
+ /* and let the card send more packets to me */
+ netif_wake_queue(dev);
+
+ PRINTK2((CARDNAME": Handoff done successfully.\n"));
+ } else if (status & IM_RX_OVRN_INT ) {
+ lp->stats.rx_errors++;
+ lp->stats.rx_fifo_errors++;
+ outb( IM_RX_OVRN_INT, ioaddr + INTERRUPT );
+ } else if (status & IM_EPH_INT ) {
+ PRINTK((CARDNAME ": UNSUPPORTED: EPH INTERRUPT \n"));
+ } else if (status & IM_ERCV_INT ) {
+ PRINTK((CARDNAME ": UNSUPPORTED: ERCV INTERRUPT \n"));
+ outb( IM_ERCV_INT, ioaddr + INTERRUPT );
+ }
+ } while ( timeout -- );
+
+
+ /* restore state register */
+ SMC_SELECT_BANK( 2 );
+ outb( mask, ioaddr + INT_MASK );
+
+ PRINTK3(( KERN_WARNING CARDNAME ": MASK is now %x \n", mask ));
+ outw( saved_pointer, ioaddr + POINTER );
+
+ SMC_SELECT_BANK( saved_bank );
+
+ PRINTK3((CARDNAME ": Interrupt done\n"));
+ return IRQ_RETVAL(handled);
+}
+
+
+/*----------------------------------------------------
+ . smc_close
+ .
+ . this makes the board clean up everything that it can
+ . and not talk to the outside world. Caused by
+ . an 'ifconfig ethX down'
+ .
+ -----------------------------------------------------*/
+static int smc_close(struct net_device *dev)
+{
+ netif_stop_queue(dev);
+ /* clear everything */
+ smc_shutdown( dev->base_addr );
+
+ /* Update the statistics here. */
+ return 0;
+}
+
+/*------------------------------------------------------------
+ . Get the current statistics.
+ . This may be called with the card open or closed.
+ .-------------------------------------------------------------*/
+static struct net_device_stats* smc_query_statistics(struct net_device *dev) {
+ struct smc_local *lp = netdev_priv(dev);
+
+ return &lp->stats;
+}
+
+/*-----------------------------------------------------------
+ . smc_set_multicast_list
+ .
+ . This routine will, depending on the values passed to it,
+ . either make it accept multicast packets, go into
+ . promiscuous mode ( for TCPDUMP and cousins ) or accept
+ . a select set of multicast packets
+*/
+static void smc_set_multicast_list(struct net_device *dev)
+{
+ short ioaddr = dev->base_addr;
+
+ SMC_SELECT_BANK(0);
+ if ( dev->flags & IFF_PROMISC )
+ outw( inw(ioaddr + RCR ) | RCR_PROMISC, ioaddr + RCR );
+
+/* BUG? I never disable promiscuous mode if multicasting was turned on.
+ Now, I turn off promiscuous mode, but I don't do anything to multicasting
+ when promiscuous mode is turned on.
+*/
+
+ /* Here, I am setting this to accept all multicast packets.
+ I don't need to zero the multicast table, because the flag is
+ checked before the table is
+ */
+ else if (dev->flags & IFF_ALLMULTI)
+ outw( inw(ioaddr + RCR ) | RCR_ALMUL, ioaddr + RCR );
+
+ /* We just get all multicast packets even if we only want them
+ . from one source. This will be changed at some future
+ . point. */
+ else if (dev->mc_count ) {
+ /* support hardware multicasting */
+
+ /* be sure I get rid of flags I might have set */
+ outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL),
+ ioaddr + RCR );
+ /* NOTE: this has to set the bank, so make sure it is the
+ last thing called. The bank is set to zero at the top */
+ smc_setmulticast( ioaddr, dev->mc_count, dev->mc_list );
+ }
+ else {
+ outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL),
+ ioaddr + RCR );
+
+ /*
+ since I'm disabling all multicast entirely, I need to
+ clear the multicast list
+ */
+ SMC_SELECT_BANK( 3 );
+ outw( 0, ioaddr + MULTICAST1 );
+ outw( 0, ioaddr + MULTICAST2 );
+ outw( 0, ioaddr + MULTICAST3 );
+ outw( 0, ioaddr + MULTICAST4 );
+ }
+}
+
+#ifdef MODULE
+
+static struct net_device *devSMC9194;
+MODULE_LICENSE("GPL");
+
+module_param(io, int, 0);
+module_param(irq, int, 0);
+module_param(ifport, int, 0);
+MODULE_PARM_DESC(io, "SMC 99194 I/O base address");
+MODULE_PARM_DESC(irq, "SMC 99194 IRQ number");
+MODULE_PARM_DESC(ifport, "SMC 99194 interface port (0-default, 1-TP, 2-AUI)");
+
+int init_module(void)
+{
+ if (io == 0)
+ printk(KERN_WARNING
+ CARDNAME": You shouldn't use auto-probing with insmod!\n" );
+
+ /* copy the parameters from insmod into the device structure */
+ devSMC9194 = smc_init(-1);
+ if (IS_ERR(devSMC9194))
+ return PTR_ERR(devSMC9194);
+ return 0;
+}
+
+void cleanup_module(void)
+{
+ unregister_netdev(devSMC9194);
+ free_irq(devSMC9194->irq, devSMC9194);
+ release_region(devSMC9194->base_addr, SMC_IO_EXTENT);
+ free_netdev(devSMC9194);
+}
+
+#endif /* MODULE */