aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/tokenring/3c359.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tokenring/3c359.c')
-rw-r--r--drivers/net/tokenring/3c359.c1830
1 files changed, 1830 insertions, 0 deletions
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
new file mode 100644
index 00000000000..0d1dcf42177
--- /dev/null
+++ b/drivers/net/tokenring/3c359.c
@@ -0,0 +1,1830 @@
+/*
+ * 3c359.c (c) 2000 Mike Phillips (mikep@linuxtr.net) All Rights Reserved
+ *
+ * Linux driver for 3Com 3c359 Tokenlink Velocity XL PCI NIC
+ *
+ * Base Driver Olympic:
+ * Written 1999 Peter De Schrijver & Mike Phillips
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ * 7/17/00 - Clean up, version number 0.9.0. Ready to release to the world.
+ *
+ * 2/16/01 - Port up to kernel 2.4.2 ready for submission into the kernel.
+ * 3/05/01 - Last clean up stuff before submission.
+ * 2/15/01 - Finally, update to new pci api.
+ *
+ * To Do:
+ */
+
+/*
+ * Technical Card Details
+ *
+ * All access to data is done with 16/8 bit transfers. The transfer
+ * method really sucks. You can only read or write one location at a time.
+ *
+ * Also, the microcode for the card must be uploaded if the card does not have
+ * the flashrom on board. This is a 28K bloat in the driver when compiled
+ * as a module.
+ *
+ * Rx is very simple, status into a ring of descriptors, dma data transfer,
+ * interrupts to tell us when a packet is received.
+ *
+ * Tx is a little more interesting. Similar scenario, descriptor and dma data
+ * transfers, but we don't have to interrupt the card to tell it another packet
+ * is ready for transmission, we are just doing simple memory writes, not io or mmio
+ * writes. The card can be set up to simply poll on the next
+ * descriptor pointer and when this value is non-zero will automatically download
+ * the next packet. The card then interrupts us when the packet is done.
+ *
+ */
+
+#define XL_DEBUG 0
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/proc_fs.h>
+#include <linux/ptrace.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/trdevice.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+
+#include <net/checksum.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include "3c359.h"
+
+static char version[] __devinitdata =
+"3c359.c v1.2.0 2/17/01 - Mike Phillips (mikep@linuxtr.net)" ;
+
+MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
+MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
+
+/* Module paramters */
+
+/* Ring Speed 0,4,16
+ * 0 = Autosense
+ * 4,16 = Selected speed only, no autosense
+ * This allows the card to be the first on the ring
+ * and become the active monitor.
+ *
+ * WARNING: Some hubs will allow you to insert
+ * at the wrong speed.
+ *
+ * The adapter will _not_ fail to open if there are no
+ * active monitors on the ring, it will simply open up in
+ * its last known ringspeed if no ringspeed is specified.
+ */
+
+static int ringspeed[XL_MAX_ADAPTERS] = {0,} ;
+
+module_param_array(ringspeed, int, NULL, 0);
+MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ;
+
+/* Packet buffer size */
+
+static int pkt_buf_sz[XL_MAX_ADAPTERS] = {0,} ;
+
+module_param_array(pkt_buf_sz, int, NULL, 0) ;
+MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ;
+/* Message Level */
+
+static int message_level[XL_MAX_ADAPTERS] = {0,} ;
+
+module_param_array(message_level, int, NULL, 0) ;
+MODULE_PARM_DESC(message_level, "3c359: Level of reported messages \n") ;
+/*
+ * This is a real nasty way of doing this, but otherwise you
+ * will be stuck with 1555 lines of hex #'s in the code.
+ */
+
+#include "3c359_microcode.h"
+
+static struct pci_device_id xl_pci_tbl[] =
+{
+ {PCI_VENDOR_ID_3COM,PCI_DEVICE_ID_3COM_3C359, PCI_ANY_ID, PCI_ANY_ID, },
+ { } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci,xl_pci_tbl) ;
+
+static int xl_init(struct net_device *dev);
+static int xl_open(struct net_device *dev);
+static int xl_open_hw(struct net_device *dev) ;
+static int xl_hw_reset(struct net_device *dev);
+static int xl_xmit(struct sk_buff *skb, struct net_device *dev);
+static void xl_dn_comp(struct net_device *dev);
+static int xl_close(struct net_device *dev);
+static void xl_set_rx_mode(struct net_device *dev);
+static irqreturn_t xl_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static struct net_device_stats * xl_get_stats(struct net_device *dev);
+static int xl_set_mac_address(struct net_device *dev, void *addr) ;
+static void xl_arb_cmd(struct net_device *dev);
+static void xl_asb_cmd(struct net_device *dev) ;
+static void xl_srb_cmd(struct net_device *dev, int srb_cmd) ;
+static void xl_wait_misr_flags(struct net_device *dev) ;
+static int xl_change_mtu(struct net_device *dev, int mtu);
+static void xl_srb_bh(struct net_device *dev) ;
+static void xl_asb_bh(struct net_device *dev) ;
+static void xl_reset(struct net_device *dev) ;
+static void xl_freemem(struct net_device *dev) ;
+
+
+/* EEProm Access Functions */
+static u16 xl_ee_read(struct net_device *dev, int ee_addr) ;
+static void xl_ee_write(struct net_device *dev, int ee_addr, u16 ee_value) ;
+
+/* Debugging functions */
+#if XL_DEBUG
+static void print_tx_state(struct net_device *dev) ;
+static void print_rx_state(struct net_device *dev) ;
+
+static void print_tx_state(struct net_device *dev)
+{
+
+ struct xl_private *xl_priv = (struct xl_private *)dev->priv ;
+ struct xl_tx_desc *txd ;
+ u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
+ int i ;
+
+ printk("tx_ring_head: %d, tx_ring_tail: %d, free_ent: %d \n",xl_priv->tx_ring_head,
+ xl_priv->tx_ring_tail, xl_priv->free_ring_entries) ;
+ printk("Ring , Address , FSH , DnNextPtr, Buffer, Buffer_Len \n");
+ for (i = 0; i < 16; i++) {
+ txd = &(xl_priv->xl_tx_ring[i]) ;
+ printk("%d, %08lx, %08x, %08x, %08x, %08x \n", i, virt_to_bus(txd),
+ txd->framestartheader, txd->dnnextptr, txd->buffer, txd->buffer_length ) ;
+ }
+
+ printk("DNLISTPTR = %04x \n", readl(xl_mmio + MMIO_DNLISTPTR) );
+
+ printk("DmaCtl = %04x \n", readl(xl_mmio + MMIO_DMA_CTRL) );
+ printk("Queue status = %0x \n",netif_running(dev) ) ;
+}
+
+static void print_rx_state(struct net_device *dev)
+{
+
+ struct xl_private *xl_priv = (struct xl_private *)dev->priv ;
+ struct xl_rx_desc *rxd ;
+ u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
+ int i ;
+
+ printk("rx_ring_tail: %d \n", xl_priv->rx_ring_tail) ;
+ printk("Ring , Address , FrameState , UPNextPtr, FragAddr, Frag_Len \n");
+ for (i = 0; i < 16; i++) {
+ /* rxd = (struct xl_rx_desc *)xl_priv->rx_ring_dma_addr + (i * sizeof(struct xl_rx_desc)) ; */
+ rxd = &(xl_priv->xl_rx_ring[i]) ;
+ printk("%d, %08lx, %08x, %08x, %08x, %08x \n", i, virt_to_bus(rxd),
+ rxd->framestatus, rxd->upnextptr, rxd->upfragaddr, rxd->upfraglen ) ;
+ }
+
+ printk("UPLISTPTR = %04x \n", readl(xl_mmio + MMIO_UPLISTPTR) );
+
+ printk("DmaCtl = %04x \n", readl(xl_mmio + MMIO_DMA_CTRL) );
+ printk("Queue status = %0x \n",netif_running(dev) ) ;
+}
+#endif
+
+/*
+ * Read values from the on-board EEProm. This looks very strange
+ * but you have to wait for the EEProm to get/set the value before
+ * passing/getting the next value from the nic. As with all requests
+ * on this nic it has to be done in two stages, a) tell the nic which
+ * memory address you want to access and b) pass/get the value from the nic.
+ * With the EEProm, you have to wait before and inbetween access a) and b).
+ * As this is only read at initialization time and the wait period is very
+ * small we shouldn't have to worry about scheduling issues.
+ */
+
+static u16 xl_ee_read(struct net_device *dev, int ee_addr)
+{
+ struct xl_private *xl_priv = (struct xl_private *)dev->priv ;
+ u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
+
+ /* Wait for EEProm to not be busy */
+ writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
+
+ /* Tell EEProm what we want to do and where */
+ writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(EEREAD + ee_addr, xl_mmio + MMIO_MACDATA) ;
+
+ /* Wait for EEProm to not be busy */
+ writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
+
+ /* Tell EEProm what we want to do and where */
+ writel(IO_WORD_WRITE | EECONTROL , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(EEREAD + ee_addr, xl_mmio + MMIO_MACDATA) ;
+
+ /* Finally read the value from the EEProm */
+ writel(IO_WORD_READ | EEDATA , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ return readw(xl_mmio + MMIO_MACDATA) ;
+}
+
+/*
+ * Write values to the onboard eeprom. As with eeprom read you need to
+ * set which location to write, wait, value to write, wait, with the
+ * added twist of having to enable eeprom writes as well.
+ */
+
+static void xl_ee_write(struct net_device *dev, int ee_addr, u16 ee_value)
+{
+ struct xl_private *xl_priv = (struct xl_private *)dev->priv ;
+ u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
+
+ /* Wait for EEProm to not be busy */
+ writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
+
+ /* Enable write/erase */
+ writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(EE_ENABLE_WRITE, xl_mmio + MMIO_MACDATA) ;
+
+ /* Wait for EEProm to not be busy */
+ writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
+
+ /* Put the value we want to write into EEDATA */
+ writel(IO_WORD_WRITE | EEDATA, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(ee_value, xl_mmio + MMIO_MACDATA) ;
+
+ /* Tell EEProm to write eevalue into ee_addr */
+ writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(EEWRITE + ee_addr, xl_mmio + MMIO_MACDATA) ;
+
+ /* Wait for EEProm to not be busy, to ensure write gets done */
+ writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
+
+ return ;
+}
+
+int __devinit xl_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct net_device *dev ;
+ struct xl_private *xl_priv ;
+ static int card_no = -1 ;
+ int i ;
+
+ card_no++ ;
+
+ if (pci_enable_device(pdev)) {
+ return -ENODEV ;
+ }
+
+ pci_set_master(pdev);
+
+ if ((i = pci_request_regions(pdev,"3c359"))) {
+ return i ;
+ } ;
+
+ /*
+ * Allowing init_trdev to allocate the dev->priv structure will align xl_private
+ * on a 32 bytes boundary which we need for the rx/tx descriptors
+ */
+
+ dev = alloc_trdev(sizeof(struct xl_private)) ;
+ if (!dev) {
+ pci_release_regions(pdev) ;
+ return -ENOMEM ;
+ }
+ xl_priv = dev->priv ;
+
+#if XL_DEBUG
+ printk("pci_device: %p, dev:%p, dev->priv: %p, ba[0]: %10x, ba[1]:%10x\n",
+ pdev, dev, dev->priv, (unsigned int)pdev->resource[0].start, (unsigned int)pdev->resource[1].start) ;
+#endif
+
+ dev->irq=pdev->irq;
+ dev->base_addr=pci_resource_start(pdev,0) ;
+ xl_priv->xl_card_name = pci_name(pdev);
+ xl_priv->xl_mmio=ioremap(pci_resource_start(pdev,1), XL_IO_SPACE);
+ xl_priv->pdev = pdev ;
+
+ if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) )
+ xl_priv->pkt_buf_sz = PKT_BUF_SZ ;
+ else
+ xl_priv->pkt_buf_sz = pkt_buf_sz[card_no] ;
+
+ dev->mtu = xl_priv->pkt_buf_sz - TR_HLEN ;
+ xl_priv->xl_ring_speed = ringspeed[card_no] ;
+ xl_priv->xl_message_level = message_level[card_no] ;
+ xl_priv->xl_functional_addr[0] = xl_priv->xl_functional_addr[1] = xl_priv->xl_functional_addr[2] = xl_priv->xl_functional_addr[3] = 0 ;
+ xl_priv->xl_copy_all_options = 0 ;
+
+ if((i = xl_init(dev))) {
+ iounmap(xl_priv->xl_mmio) ;
+ free_netdev(dev) ;
+ pci_release_regions(pdev) ;
+ return i ;
+ }
+
+ dev->open=&xl_open;
+ dev->hard_start_xmit=&xl_xmit;
+ dev->change_mtu=&xl_change_mtu;
+ dev->stop=&xl_close;
+ dev->do_ioctl=NULL;
+ dev->set_multicast_list=&xl_set_rx_mode;
+ dev->get_stats=&xl_get_stats ;
+ dev->set_mac_address=&xl_set_mac_address ;
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ pci_set_drvdata(pdev,dev) ;
+ if ((i = register_netdev(dev))) {
+ printk(KERN_ERR "3C359, register netdev failed\n") ;
+ pci_set_drvdata(pdev,NULL) ;
+ iounmap(xl_priv->xl_mmio) ;
+ free_netdev(dev) ;
+ pci_release_regions(pdev) ;
+ return i ;
+ }
+
+ printk(KERN_INFO "3C359: %s registered as: %s\n",xl_priv->xl_card_name,dev->name) ;
+
+ return 0;
+}
+
+
+static int __init xl_init(struct net_device *dev)
+{
+ struct xl_private *xl_priv = (struct xl_private *)dev->priv ;
+
+ printk(KERN_INFO "%s \n", version);
+ printk(KERN_INFO "%s: I/O at %hx, MMIO at %p, using irq %d\n",
+ xl_priv->xl_card_name, (unsigned int)dev->base_addr ,xl_priv->xl_mmio, dev->irq);
+
+ spin_lock_init(&xl_priv->xl_lock) ;
+
+ return xl_hw_reset(dev) ;
+
+}
+
+
+/*
+ * Hardware reset. This needs to be a separate entity as we need to reset the card
+ * when we change the EEProm settings.
+ */
+
+static int xl_hw_reset(struct net_device *dev)
+{
+ struct xl_private *xl_priv = (struct xl_private *)dev->priv ;
+ u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
+ unsigned long t ;
+ u16 i ;
+ u16 result_16 ;
+ u8 result_8 ;
+ u16 start ;
+ int j ;
+
+ /*
+ * Reset the card. If the card has got the microcode on board, we have
+ * missed the initialization interrupt, so we must always do this.
+ */
+
+ writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ;
+
+ /*
+ * Must wait for cmdInProgress bit (12) to clear before continuing with
+ * card configuration.
+ */
+
+ t=jiffies;
+ while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
+ schedule();
+ if(jiffies-t > 40*HZ) {
+ printk(KERN_ERR "%s: 3COM 3C359 Velocity XL card not responding to global reset.\n", dev->name);
+ return -ENODEV;
+ }
+ }
+
+ /*
+ * Enable pmbar by setting bit in CPAttention
+ */
+
+ writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ result_8 = readb(xl_mmio + MMIO_MACDATA) ;
+ result_8 = result_8 | CPA_PMBARVIS ;
+ writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(result_8, xl_mmio + MMIO_MACDATA) ;
+
+ /*
+ * Read cpHold bit in pmbar, if cleared we have got Flashrom on board.
+ * If not, we need to upload the microcode to the card
+ */
+
+ writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD);
+
+#if XL_DEBUG
+ printk(KERN_INFO "Read from PMBAR = %04x \n", readw(xl_mmio + MMIO_MACDATA)) ;
+#endif
+
+ if ( readw( (xl_mmio + MMIO_MACDATA)) & PMB_CPHOLD ) {
+
+ /* Set PmBar, privateMemoryBase bits (8:2) to 0 */
+
+ writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD);
+ result_16 = readw(xl_mmio + MMIO_MACDATA) ;
+ result_16 = result_16 & ~((0x7F) << 2) ;
+ writel( (IO_WORD_WRITE | PMBAR), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(result_16,xl_mmio + MMIO_MACDATA) ;
+
+ /* Set CPAttention, memWrEn bit */
+
+ writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ result_8 = readb(xl_mmio + MMIO_MACDATA) ;
+ result_8 = result_8 | CPA_MEMWREN ;
+ writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(result_8, xl_mmio + MMIO_MACDATA) ;
+
+ /*
+ * Now to write the microcode into the shared ram
+ * The microcode must finish at position 0xFFFF, so we must subtract
+ * to get the start position for the code
+ */
+
+ start = (0xFFFF - (mc_size) + 1 ) ; /* Looks strange but ensures compiler only uses 16 bit unsigned int for this */
+
+ printk(KERN_INFO "3C359: Uploading Microcode: ");
+
+ for (i = start, j = 0; j < mc_size; i++, j++) {
+ writel(MEM_BYTE_WRITE | 0XD0000 | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(microcode[j],xl_mmio + MMIO_MACDATA) ;
+ if (j % 1024 == 0)
+ printk(".");
+ }
+ printk("\n") ;
+
+ for (i=0;i < 16; i++) {
+ writel( (MEM_BYTE_WRITE | 0xDFFF0) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(microcode[mc_size - 16 + i], xl_mmio + MMIO_MACDATA) ;
+ }
+
+ /*
+ * Have to write the start address of the upload to FFF4, but
+ * the address must be >> 4. You do not want to know how long
+ * it took me to discover this.
+ */
+
+ writel(MEM_WORD_WRITE | 0xDFFF4, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(start >> 4, xl_mmio + MMIO_MACDATA);
+
+ /* Clear the CPAttention, memWrEn Bit */
+
+ writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ result_8 = readb(xl_mmio + MMIO_MACDATA) ;
+ result_8 = result_8 & ~CPA_MEMWREN ;
+ writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(result_8, xl_mmio + MMIO_MACDATA) ;
+
+ /* Clear the cpHold bit in pmbar */
+
+ writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD);
+ result_16 = readw(xl_mmio + MMIO_MACDATA) ;
+ result_16 = result_16 & ~PMB_CPHOLD ;
+ writel( (IO_WORD_WRITE | PMBAR), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(result_16,xl_mmio + MMIO_MACDATA) ;
+
+
+ } /* If microcode upload required */
+
+ /*
+ * The card should now go though a self test procedure and get itself ready
+ * to be opened, we must wait for an srb response with the initialization
+ * information.
+ */
+
+#if XL_DEBUG
+ printk(KERN_INFO "%s: Microcode uploaded, must wait for the self test to complete\n", dev->name);
+#endif
+
+ writew(SETINDENABLE | 0xFFF, xl_mmio + MMIO_COMMAND) ;
+
+ t=jiffies;
+ while ( !(readw(xl_mmio + MMIO_INTSTATUS_AUTO) & INTSTAT_SRB) ) {
+ schedule();
+ if(jiffies-t > 15*HZ) {
+ printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
+ return -ENODEV;
+ }
+ }
+
+ /*
+ * Write the RxBufArea with D000, RxEarlyThresh, TxStartThresh,
+ * DnPriReqThresh, read the tech docs if you want to know what
+ * values they need to be.
+ */
+
+ writel(MMIO_WORD_WRITE | RXBUFAREA, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(0xD000, xl_mmio + MMIO_MACDATA) ;
+
+ writel(MMIO_WORD_WRITE | RXEARLYTHRESH, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(0X0020, xl_mmio + MMIO_MACDATA) ;
+
+ writew( SETTXSTARTTHRESH | 0x40 , xl_mmio + MMIO_COMMAND) ;
+
+ writeb(0x04, xl_mmio + MMIO_DNBURSTTHRESH) ;
+ writeb(0x04, xl_mmio + DNPRIREQTHRESH) ;
+
+ /*
+ * Read WRBR to provide the location of the srb block, have to use byte reads not word reads.
+ * Tech docs have this wrong !!!!
+ */
+
+ writel(MMIO_BYTE_READ | WRBR, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ xl_priv->srb = readb(xl_mmio + MMIO_MACDATA) << 8 ;
+ writel( (MMIO_BYTE_READ | WRBR) + 1, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ xl_priv->srb = xl_priv->srb | readb(xl_mmio + MMIO_MACDATA) ;
+
+#if XL_DEBUG
+ writel(IO_WORD_READ | SWITCHSETTINGS, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ if ( readw(xl_mmio + MMIO_MACDATA) & 2) {
+ printk(KERN_INFO "Default ring speed 4 mbps \n") ;
+ } else {
+ printk(KERN_INFO "Default ring speed 16 mbps \n") ;
+ }
+ printk(KERN_INFO "%s: xl_priv->srb = %04x\n",xl_priv->xl_card_name, xl_priv->srb);
+#endif
+
+ return 0;
+}
+
+static int xl_open(struct net_device *dev)
+{
+ struct xl_private *xl_priv=(struct xl_private *)dev->priv;
+ u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
+ u8 i ;
+ u16 hwaddr[3] ; /* Should be u8[6] but we get word return values */
+ int open_err ;
+
+ u16 switchsettings, switchsettings_eeprom ;
+
+ if(request_irq(dev->irq, &xl_interrupt, SA_SHIRQ , "3c359", dev)) {
+ return -EAGAIN;
+ }
+
+ /*
+ * Read the information from the EEPROM that we need. I know we
+ * should use ntohs, but the word gets stored reversed in the 16
+ * bit field anyway and it all works its self out when we memcpy
+ * it into dev->dev_addr.
+ */
+
+ hwaddr[0] = xl_ee_read(dev,0x10) ;
+ hwaddr[1] = xl_ee_read(dev,0x11) ;
+ hwaddr[2] = xl_ee_read(dev,0x12) ;
+
+ /* Ring speed */
+
+ switchsettings_eeprom = xl_ee_read(dev,0x08) ;
+ switchsettings = switchsettings_eeprom ;
+
+ if (xl_priv->xl_ring_speed != 0) {
+ if (xl_priv->xl_ring_speed == 4)
+ switchsettings = switchsettings | 0x02 ;
+ else
+ switchsettings = switchsettings & ~0x02 ;
+ }
+
+ /* Only write EEProm if there has been a change */
+ if (switchsettings != switchsettings_eeprom) {
+ xl_ee_write(dev,0x08,switchsettings) ;
+ /* Hardware reset after changing EEProm */
+ xl_hw_reset(dev) ;
+ }
+
+ memcpy(dev->dev_addr,hwaddr,dev->addr_len) ;
+
+ open_err = xl_open_hw(dev) ;
+
+ /*
+ * This really needs to be cleaned up with better error reporting.
+ */
+
+ if (open_err != 0) { /* Something went wrong with the open command */
+ if (open_err & 0x07) { /* Wrong speed, retry at different speed */
+ printk(KERN_WARNING "%s: Open Error, retrying at different ringspeed \n", dev->name) ;
+ switchsettings = switchsettings ^ 2 ;
+ xl_ee_write(dev,0x08,switchsettings) ;
+ xl_hw_reset(dev) ;
+ open_err = xl_open_hw(dev) ;
+ if (open_err != 0) {
+ printk(KERN_WARNING "%s: Open error returned a second time, we're bombing out now\n", dev->name);
+ free_irq(dev->irq,dev) ;
+ return -ENODEV ;
+ }
+ } else {
+ printk(KERN_WARNING "%s: Open Error = %04x\n", dev->name, open_err) ;
+ free_irq(dev->irq,dev) ;
+ return -ENODEV ;
+ }
+ }
+
+ /*
+ * Now to set up the Rx and Tx buffer structures
+ */
+ /* These MUST be on 8 byte boundaries */
+ xl_priv->xl_tx_ring = kmalloc((sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE) + 7, GFP_DMA | GFP_KERNEL) ;
+ if (xl_priv->xl_tx_ring == NULL) {
+ printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers.\n",
+ dev->name);
+ free_irq(dev->irq,dev);
+ return -ENOMEM;
+ }
+ xl_priv->xl_rx_ring = kmalloc((sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE) +7, GFP_DMA | GFP_KERNEL) ;
+ if (xl_priv->xl_tx_ring == NULL) {
+ printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers.\n",
+ dev->name);
+ free_irq(dev->irq,dev);
+ kfree(xl_priv->xl_tx_ring);
+ return -ENOMEM;
+ }
+ memset(xl_priv->xl_tx_ring,0,sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE) ;
+ memset(xl_priv->xl_rx_ring,0,sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE) ;
+
+ /* Setup Rx Ring */
+ for (i=0 ; i < XL_RX_RING_SIZE ; i++) {
+ struct sk_buff *skb ;
+
+ skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ;
+ if (skb==NULL)
+ break ;
+
+ skb->dev = dev ;
+ xl_priv->xl_rx_ring[i].upfragaddr = pci_map_single(xl_priv->pdev, skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE) ;
+ xl_priv->xl_rx_ring[i].upfraglen = xl_priv->pkt_buf_sz | RXUPLASTFRAG;
+ xl_priv->rx_ring_skb[i] = skb ;
+ }
+
+ if (i==0) {
+ printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled \n",dev->name) ;
+ free_irq(dev->irq,dev) ;
+ return -EIO ;
+ }
+
+ xl_priv->rx_ring_no = i ;
+ xl_priv->rx_ring_tail = 0 ;
+ xl_priv->rx_ring_dma_addr = pci_map_single(xl_priv->pdev,xl_priv->xl_rx_ring, sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE, PCI_DMA_TODEVICE) ;
+ for (i=0;i<(xl_priv->rx_ring_no-1);i++) {
+ xl_priv->xl_rx_ring[i].upnextptr = xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * (i+1)) ;
+ }
+ xl_priv->xl_rx_ring[i].upnextptr = 0 ;
+
+ writel(xl_priv->rx_ring_dma_addr, xl_mmio + MMIO_UPLISTPTR) ;
+
+ /* Setup Tx Ring */
+
+ xl_priv->tx_ring_dma_addr = pci_map_single(xl_priv->pdev,xl_priv->xl_tx_ring, sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE,PCI_DMA_TODEVICE) ;
+
+ xl_priv->tx_ring_head = 1 ;
+ xl_priv->tx_ring_tail = 255 ; /* Special marker for first packet */
+ xl_priv->free_ring_entries = XL_TX_RING_SIZE ;
+
+ /*
+ * Setup the first dummy DPD entry for polling to start working.
+ */
+
+ xl_priv->xl_tx_ring[0].framestartheader = TXDPDEMPTY ;
+ xl_priv->xl_tx_ring[0].buffer = 0 ;
+ xl_priv->xl_tx_ring[0].buffer_length = 0 ;
+ xl_priv->xl_tx_ring[0].dnnextptr = 0 ;
+
+ writel(xl_priv->tx_ring_dma_addr, xl_mmio + MMIO_DNLISTPTR) ;
+ writel(DNUNSTALL, xl_mmio + MMIO_COMMAND) ;
+ writel(UPUNSTALL, xl_mmio + MMIO_COMMAND) ;
+ writel(DNENABLE, xl_mmio + MMIO_COMMAND) ;
+ writeb(0x40, xl_mmio + MMIO_DNPOLL) ;
+
+ /*
+ * Enable interrupts on the card
+ */
+
+ writel(SETINTENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
+ writel(SETINDENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
+
+ netif_start_queue(dev) ;
+ return 0;
+
+}
+
+static int xl_open_hw(struct net_device *dev)
+{
+ struct xl_private *xl_priv=(struct xl_private *)dev->priv;
+ u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
+ u16 vsoff ;
+ char ver_str[33];
+ int open_err ;
+ int i ;
+ unsigned long t ;
+
+ /*
+ * Okay, let's build up the Open.NIC srb command
+ *
+ */
+
+ writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(OPEN_NIC, xl_mmio + MMIO_MACDATA) ;
+
+ /*
+ * Use this as a test byte, if it comes back with the same value, the command didn't work
+ */
+
+ writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb)+ 2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(0xff,xl_mmio + MMIO_MACDATA) ;
+
+ /* Open options */
+ writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + 8, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(0x00, xl_mmio + MMIO_MACDATA) ;
+ writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + 9, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(0x00, xl_mmio + MMIO_MACDATA) ;
+
+ /*
+ * Node address, be careful here, the docs say you can just put zeros here and it will use
+ * the hardware address, it doesn't, you must include the node address in the open command.
+ */
+
+ if (xl_priv->xl_laa[0]) { /* If using a LAA address */
+ for (i=10;i<16;i++) {
+ writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(xl_priv->xl_laa[i],xl_mmio + MMIO_MACDATA) ;
+ }
+ memcpy(dev->dev_addr,xl_priv->xl_laa,dev->addr_len) ;
+ } else { /* Regular hardware address */
+ for (i=10;i<16;i++) {
+ writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(dev->dev_addr[i-10], xl_mmio + MMIO_MACDATA) ;
+ }
+ }
+
+ /* Default everything else to 0 */
+ for (i = 16; i < 34; i++) {
+ writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(0x00,xl_mmio + MMIO_MACDATA) ;
+ }
+
+ /*
+ * Set the csrb bit in the MISR register
+ */
+
+ xl_wait_misr_flags(dev) ;
+ writel(MEM_BYTE_WRITE | MF_CSRB, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(0xFF, xl_mmio + MMIO_MACDATA) ;
+ writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(MISR_CSRB , xl_mmio + MMIO_MACDATA) ;
+
+ /*
+ * Now wait for the command to run
+ */
+
+ t=jiffies;
+ while (! (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
+ schedule();
+ if(jiffies-t > 40*HZ) {
+ printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
+ break ;
+ }
+ }
+
+ /*
+ * Let's interpret the open response
+ */
+
+ writel( (MEM_BYTE_READ | 0xD0000 | xl_priv->srb)+2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ if (readb(xl_mmio + MMIO_MACDATA)!=0) {
+ open_err = readb(xl_mmio + MMIO_MACDATA) << 8 ;
+ writel( (MEM_BYTE_READ | 0xD0000 | xl_priv->srb) + 7, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ open_err |= readb(xl_mmio + MMIO_MACDATA) ;
+ return open_err ;
+ } else {
+ writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 8, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ xl_priv->asb = ntohs(readw(xl_mmio + MMIO_MACDATA)) ;
+ printk(KERN_INFO "%s: Adapter Opened Details: ",dev->name) ;
+ printk("ASB: %04x",xl_priv->asb ) ;
+ writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 10, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ printk(", SRB: %04x",ntohs(readw(xl_mmio + MMIO_MACDATA)) ) ;
+
+ writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 12, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ xl_priv->arb = ntohs(readw(xl_mmio + MMIO_MACDATA)) ;
+ printk(", ARB: %04x \n",xl_priv->arb ) ;
+ writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 14, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ vsoff = ntohs(readw(xl_mmio + MMIO_MACDATA)) ;
+
+ /*
+ * Interesting, sending the individual characters directly to printk was causing klogd to use
+ * use 100% of processor time, so we build up the string and print that instead.
+ */
+
+ for (i=0;i<0x20;i++) {
+ writel( (MEM_BYTE_READ | 0xD0000 | vsoff) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ ver_str[i] = readb(xl_mmio + MMIO_MACDATA) ;
+ }
+ ver_str[i] = '\0' ;
+ printk(KERN_INFO "%s: Microcode version String: %s \n",dev->name,ver_str);
+ }
+
+ /*
+ * Issue the AckInterrupt
+ */
+ writew(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
+
+ return 0 ;
+}
+
+/*
+ * There are two ways of implementing rx on the 359 NIC, either
+ * interrupt driven or polling. We are going to uses interrupts,
+ * it is the easier way of doing things.
+ *
+ * The Rx works with a ring of Rx descriptors. At initialise time the ring
+ * entries point to the next entry except for the last entry in the ring
+ * which points to 0. The card is programmed with the location of the first
+ * available descriptor and keeps reading the next_ptr until next_ptr is set
+ * to 0. Hopefully with a ring size of 16 the card will never get to read a next_ptr
+ * of 0. As the Rx interrupt is received we copy the frame up to the protocol layers
+ * and then point the end of the ring to our current position and point our current
+ * position to 0, therefore making the current position the last position on the ring.
+ * The last position on the ring therefore loops continually loops around the rx ring.
+ *
+ * rx_ring_tail is the position on the ring to process next. (Think of a snake, the head
+ * expands as the card adds new packets and we go around eating the tail processing the
+ * packets.)
+ *
+ * Undoubtably it could be streamlined and improved upon, but at the moment it works
+ * and the fast path through the routine is fine.
+ *
+ * adv_rx_ring could be inlined to increase performance, but its called a *lot* of times
+ * in xl_rx so would increase the size of the function significantly.
+ */
+
+static void adv_rx_ring(struct net_device *dev) /* Advance rx_ring, cut down on bloat in xl_rx */
+{
+ struct xl_private *xl_priv=(struct xl_private *)dev->priv;
+ int prev_ring_loc ;
+
+ prev_ring_loc = (xl_priv->rx_ring_tail + XL_RX_RING_SIZE - 1) & (XL_RX_RING_SIZE - 1);
+ xl_priv->xl_rx_ring[prev_ring_loc].upnextptr = xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * xl_priv->rx_ring_tail) ;
+ xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus = 0 ;
+ xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upnextptr = 0 ;
+ xl_priv->rx_ring_tail++ ;
+ xl_priv->rx_ring_tail &= (XL_RX_RING_SIZE-1) ;
+
+ return ;
+}
+
+static void xl_rx(struct net_device *dev)
+{
+ struct xl_private *xl_priv=(struct xl_private *)dev->priv;
+ u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
+ struct sk_buff *skb, *skb2 ;
+ int frame_length = 0, copy_len = 0 ;
+ int temp_ring_loc ;
+
+ /*
+ * Receive the next frame, loop around the ring until all frames
+ * have been received.
+ */
+
+ while (xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & (RXUPDCOMPLETE | RXUPDFULL) ) { /* Descriptor to process */
+
+ if (xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & RXUPDFULL ) { /* UpdFull, Multiple Descriptors used for the frame */
+
+ /*
+ * This is a pain, you need to go through all the descriptors until the last one
+ * for this frame to find the framelength
+ */
+
+ temp_ring_loc = xl_priv->rx_ring_tail ;
+
+ while (xl_priv->xl_rx_ring[temp_ring_loc].framestatus & RXUPDFULL ) {
+ temp_ring_loc++ ;
+ temp_ring_loc &= (XL_RX_RING_SIZE-1) ;
+ }
+
+ frame_length = xl_priv->xl_rx_ring[temp_ring_loc].framestatus & 0x7FFF ;
+
+ skb = dev_alloc_skb(frame_length) ;
+
+ if (skb==NULL) { /* No memory for frame, still need to roll forward the rx ring */
+ printk(KERN_WARNING "%s: dev_alloc_skb failed - multi buffer !\n", dev->name) ;
+ while (xl_priv->rx_ring_tail != temp_ring_loc)
+ adv_rx_ring(dev) ;
+
+ adv_rx_ring(dev) ; /* One more time just for luck :) */
+ xl_priv->xl_stats.rx_dropped++ ;
+
+ writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
+ return ;
+ }
+
+ skb->dev = dev ;
+
+ while (xl_priv->rx_ring_tail != temp_ring_loc) {
+ copy_len = xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen & 0x7FFF ;
+ frame_length -= copy_len ;
+ pci_dma_sync_single_for_cpu(xl_priv->pdev,xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr,xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+ memcpy(skb_put(skb,copy_len), xl_priv->rx_ring_skb[xl_priv->rx_ring_tail]->data, copy_len) ;
+ pci_dma_sync_single_for_device(xl_priv->pdev,xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr,xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+ adv_rx_ring(dev) ;
+ }
+
+ /* Now we have found the last fragment */
+ pci_dma_sync_single_for_cpu(xl_priv->pdev,xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr,xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+ memcpy(skb_put(skb,copy_len), xl_priv->rx_ring_skb[xl_priv->rx_ring_tail]->data, frame_length) ;
+/* memcpy(skb_put(skb,frame_length), bus_to_virt(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr), frame_length) ; */
+ pci_dma_sync_single_for_device(xl_priv->pdev,xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr,xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+ adv_rx_ring(dev) ;
+ skb->protocol = tr_type_trans(skb,dev) ;
+ netif_rx(skb) ;
+
+ } else { /* Single Descriptor Used, simply swap buffers over, fast path */
+
+ frame_length = xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & 0x7FFF ;
+
+ skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ;
+
+ if (skb==NULL) { /* Still need to fix the rx ring */
+ printk(KERN_WARNING "%s: dev_alloc_skb failed in rx, single buffer \n",dev->name) ;
+ adv_rx_ring(dev) ;
+ xl_priv->xl_stats.rx_dropped++ ;
+ writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
+ return ;
+ }
+
+ skb->dev = dev ;
+
+ skb2 = xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] ;
+ pci_unmap_single(xl_priv->pdev, xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr, xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+ skb_put(skb2, frame_length) ;
+ skb2->protocol = tr_type_trans(skb2,dev) ;
+
+ xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] = skb ;
+ xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr = pci_map_single(xl_priv->pdev,skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE) ;
+ xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen = xl_priv->pkt_buf_sz | RXUPLASTFRAG ;
+ adv_rx_ring(dev) ;
+ xl_priv->xl_stats.rx_packets++ ;
+ xl_priv->xl_stats.rx_bytes += frame_length ;
+
+ netif_rx(skb2) ;
+ } /* if multiple buffers */
+ dev->last_rx = jiffies ;
+ } /* while packet to do */
+
+ /* Clear the updComplete interrupt */
+ writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
+ return ;
+}
+
+/*
+ * This is ruthless, it doesn't care what state the card is in it will
+ * completely reset the adapter.
+ */
+
+static void xl_reset(struct net_device *dev)
+{
+ struct xl_private *xl_priv=(struct xl_private *)dev->priv;
+ u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
+ unsigned long t;
+
+ writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ;
+
+ /*
+ * Must wait for cmdInProgress bit (12) to clear before continuing with
+ * card configuration.
+ */
+
+ t=jiffies;
+ while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
+ if(jiffies-t > 40*HZ) {
+ printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
+ break ;
+ }
+ }
+
+}
+
+static void xl_freemem(struct net_device *dev)
+{
+ struct xl_private *xl_priv=(struct xl_private *)dev->priv ;
+ int i ;
+
+ for (i=0;i<XL_RX_RING_SIZE;i++) {
+ dev_kfree_skb_irq(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail]) ;
+ pci_unmap_single(xl_priv->pdev,xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE) ;
+ xl_priv->rx_ring_tail++ ;
+ xl_priv->rx_ring_tail &= XL_RX_RING_SIZE-1;
+ }
+
+ /* unmap ring */
+ pci_unmap_single(xl_priv->pdev,xl_priv->rx_ring_dma_addr, sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE, PCI_DMA_FROMDEVICE) ;
+
+ pci_unmap_single(xl_priv->pdev,xl_priv->tx_ring_dma_addr, sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE, PCI_DMA_TODEVICE) ;
+
+ kfree(xl_priv->xl_rx_ring) ;
+ kfree(xl_priv->xl_tx_ring) ;
+
+ return ;
+}
+
+static irqreturn_t xl_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct xl_private *xl_priv =(struct xl_private *)dev->priv;
+ u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
+ u16 intstatus, macstatus ;
+
+ if (!dev) {
+ printk(KERN_WARNING "Device structure dead, aaahhhh !\n") ;
+ return IRQ_NONE;
+ }
+
+ intstatus = readw(xl_mmio + MMIO_INTSTATUS) ;
+
+ if (!(intstatus & 1)) /* We didn't generate the interrupt */
+ return IRQ_NONE;
+
+ spin_lock(&xl_priv->xl_lock) ;
+
+ /*
+ * Process the interrupt
+ */
+ /*
+ * Something fishy going on here, we shouldn't get 0001 ints, not fatal though.
+ */
+ if (intstatus == 0x0001) {
+ writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
+ printk(KERN_INFO "%s: 00001 int received \n",dev->name) ;
+ } else {
+ if (intstatus & (HOSTERRINT | SRBRINT | ARBCINT | UPCOMPINT | DNCOMPINT | HARDERRINT | (1<<8) | TXUNDERRUN | ASBFINT)) {
+
+ /*
+ * Host Error.
+ * It may be possible to recover from this, but usually it means something
+ * is seriously fubar, so we just close the adapter.
+ */
+
+ if (intstatus & HOSTERRINT) {
+ printk(KERN_WARNING "%s: Host Error, performing global reset, intstatus = %04x \n",dev->name,intstatus) ;
+ writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ;
+ printk(KERN_WARNING "%s: Resetting hardware: \n", dev->name);
+ netif_stop_queue(dev) ;
+ xl_freemem(dev) ;
+ free_irq(dev->irq,dev);
+ xl_reset(dev) ;
+ writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
+ spin_unlock(&xl_priv->xl_lock) ;
+ return IRQ_HANDLED;
+ } /* Host Error */
+
+ if (intstatus & SRBRINT ) { /* Srbc interrupt */
+ writel(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
+ if (xl_priv->srb_queued)
+ xl_srb_bh(dev) ;
+ } /* SRBR Interrupt */
+
+ if (intstatus & TXUNDERRUN) { /* Issue DnReset command */
+ writel(DNRESET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { /* Wait for command to run */
+ /* !!! FIX-ME !!!!
+ Must put a timeout check here ! */
+ /* Empty Loop */
+ }
+ printk(KERN_WARNING "%s: TX Underrun received \n",dev->name) ;
+ writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
+ } /* TxUnderRun */
+
+ if (intstatus & ARBCINT ) { /* Arbc interrupt */
+ xl_arb_cmd(dev) ;
+ } /* Arbc */
+
+ if (intstatus & ASBFINT) {
+ if (xl_priv->asb_queued == 1) {
+ xl_asb_cmd(dev) ;
+ } else if (xl_priv->asb_queued == 2) {
+ xl_asb_bh(dev) ;
+ } else {
+ writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ;
+ }
+ } /* Asbf */
+
+ if (intstatus & UPCOMPINT ) /* UpComplete */
+ xl_rx(dev) ;
+
+ if (intstatus & DNCOMPINT ) /* DnComplete */
+ xl_dn_comp(dev) ;
+
+ if (intstatus & HARDERRINT ) { /* Hardware error */
+ writel(MMIO_WORD_READ | MACSTATUS, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ macstatus = readw(xl_mmio + MMIO_MACDATA) ;
+ printk(KERN_WARNING "%s: MacStatusError, details: ", dev->name);
+ if (macstatus & (1<<14))
+ printk(KERN_WARNING "tchk error: Unrecoverable error \n") ;
+ if (macstatus & (1<<3))
+ printk(KERN_WARNING "eint error: Internal watchdog timer expired \n") ;
+ if (macstatus & (1<<2))
+ printk(KERN_WARNING "aint error: Host tried to perform invalid operation \n") ;
+ printk(KERN_WARNING "Instatus = %02x, macstatus = %02x\n",intstatus,macstatus) ;
+ printk(KERN_WARNING "%s: Resetting hardware: \n", dev->name);
+ netif_stop_queue(dev) ;
+ xl_freemem(dev) ;
+ free_irq(dev->irq,dev);
+ unregister_netdev(dev) ;
+ free_netdev(dev) ;
+ xl_reset(dev) ;
+ writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
+ spin_unlock(&xl_priv->xl_lock) ;
+ return IRQ_HANDLED;
+ }
+ } else {
+ printk(KERN_WARNING "%s: Received Unknown interrupt : %04x \n", dev->name, intstatus) ;
+ writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
+ }
+ }
+
+ /* Turn interrupts back on */
+
+ writel( SETINDENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
+ writel( SETINTENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
+
+ spin_unlock(&xl_priv->xl_lock) ;
+ return IRQ_HANDLED;
+}
+
+/*
+ * Tx - Polling configuration
+ */
+
+static int xl_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct xl_private *xl_priv=(struct xl_private *)dev->priv;
+ struct xl_tx_desc *txd ;
+ int tx_head, tx_tail, tx_prev ;
+ unsigned long flags ;
+
+ spin_lock_irqsave(&xl_priv->xl_lock,flags) ;
+
+ netif_stop_queue(dev) ;
+
+ if (xl_priv->free_ring_entries > 1 ) {
+ /*
+ * Set up the descriptor for the packet
+ */
+ tx_head = xl_priv->tx_ring_head ;
+ tx_tail = xl_priv->tx_ring_tail ;
+
+ txd = &(xl_priv->xl_tx_ring[tx_head]) ;
+ txd->dnnextptr = 0 ;
+ txd->framestartheader = skb->len | TXDNINDICATE ;
+ txd->buffer = pci_map_single(xl_priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE) ;
+ txd->buffer_length = skb->len | TXDNFRAGLAST ;
+ xl_priv->tx_ring_skb[tx_head] = skb ;
+ xl_priv->xl_stats.tx_packets++ ;
+ xl_priv->xl_stats.tx_bytes += skb->len ;
+
+ /*
+ * Set the nextptr of the previous descriptor equal to this descriptor, add XL_TX_RING_SIZE -1
+ * to ensure no negative numbers in unsigned locations.
+ */
+
+ tx_prev = (xl_priv->tx_ring_head + XL_TX_RING_SIZE - 1) & (XL_TX_RING_SIZE - 1) ;
+
+ xl_priv->tx_ring_head++ ;
+ xl_priv->tx_ring_head &= (XL_TX_RING_SIZE - 1) ;
+ xl_priv->free_ring_entries-- ;
+
+ xl_priv->xl_tx_ring[tx_prev].dnnextptr = xl_priv->tx_ring_dma_addr + (sizeof (struct xl_tx_desc) * tx_head) ;
+
+ /* Sneaky, by doing a read on DnListPtr we can force the card to poll on the DnNextPtr */
+ /* readl(xl_mmio + MMIO_DNLISTPTR) ; */
+
+ netif_wake_queue(dev) ;
+
+ spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ;
+
+ return 0;
+ } else {
+ spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ;
+ return 1;
+ }
+
+}
+
+/*
+ * The NIC has told us that a packet has been downloaded onto the card, we must
+ * find out which packet it has done, clear the skb and information for the packet
+ * then advance around the ring for all tranmitted packets
+ */
+
+static void xl_dn_comp(struct net_device *dev)
+{
+ struct xl_private *xl_priv=(struct xl_private *)dev->priv;
+ u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
+ struct xl_tx_desc *txd ;
+
+
+ if (xl_priv->tx_ring_tail == 255) {/* First time */
+ xl_priv->xl_tx_ring[0].framestartheader = 0 ;
+ xl_priv->xl_tx_ring[0].dnnextptr = 0 ;
+ xl_priv->tx_ring_tail = 1 ;
+ }
+
+ while (xl_priv->xl_tx_ring[xl_priv->tx_ring_tail].framestartheader & TXDNCOMPLETE ) {
+ txd = &(xl_priv->xl_tx_ring[xl_priv->tx_ring_tail]) ;
+ pci_unmap_single(xl_priv->pdev,txd->buffer, xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]->len, PCI_DMA_TODEVICE) ;
+ txd->framestartheader = 0 ;
+ txd->buffer = 0xdeadbeef ;
+ txd->buffer_length = 0 ;
+ dev_kfree_skb_irq(xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]) ;
+ xl_priv->tx_ring_tail++ ;
+ xl_priv->tx_ring_tail &= (XL_TX_RING_SIZE - 1) ;
+ xl_priv->free_ring_entries++ ;
+ }
+
+ netif_wake_queue(dev) ;
+
+ writel(ACK_INTERRUPT | DNCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
+}
+
+/*
+ * Close the adapter properly.
+ * This srb reply cannot be handled from interrupt context as we have
+ * to free the interrupt from the driver.
+ */
+
+static int xl_close(struct net_device *dev)
+{
+ struct xl_private *xl_priv = (struct xl_private *) dev->priv ;
+ u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
+ unsigned long t ;
+
+ netif_stop_queue(dev) ;
+
+ /*
+ * Close the adapter, need to stall the rx and tx queues.
+ */
+
+ writew(DNSTALL, xl_mmio + MMIO_COMMAND) ;
+ t=jiffies;
+ while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
+ schedule();
+ if(jiffies-t > 10*HZ) {
+ printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNSTALL not responding.\n", dev->name);
+ break ;
+ }
+ }
+ writew(DNDISABLE, xl_mmio + MMIO_COMMAND) ;
+ t=jiffies;
+ while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
+ schedule();
+ if(jiffies-t > 10*HZ) {
+ printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNDISABLE not responding.\n", dev->name);
+ break ;
+ }
+ }
+ writew(UPSTALL, xl_mmio + MMIO_COMMAND) ;
+ t=jiffies;
+ while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
+ schedule();
+ if(jiffies-t > 10*HZ) {
+ printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPSTALL not responding.\n", dev->name);
+ break ;
+ }
+ }
+
+ /* Turn off interrupts, we will still get the indication though
+ * so we can trap it
+ */
+
+ writel(SETINTENABLE, xl_mmio + MMIO_COMMAND) ;
+
+ xl_srb_cmd(dev,CLOSE_NIC) ;
+
+ t=jiffies;
+ while (!(readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
+ schedule();
+ if(jiffies-t > 10*HZ) {
+ printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-CLOSENIC not responding.\n", dev->name);
+ break ;
+ }
+ }
+ /* Read the srb response from the adapter */
+
+ writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD);
+ if (readb(xl_mmio + MMIO_MACDATA) != CLOSE_NIC) {
+ printk(KERN_INFO "%s: CLOSE_NIC did not get a CLOSE_NIC response \n",dev->name) ;
+ } else {
+ writel((MEM_BYTE_READ | 0xd0000 | xl_priv->srb) +2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ if (readb(xl_mmio + MMIO_MACDATA)==0) {
+ printk(KERN_INFO "%s: Adapter has been closed \n",dev->name) ;
+ writew(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
+
+ xl_freemem(dev) ;
+ free_irq(dev->irq,dev) ;
+ } else {
+ printk(KERN_INFO "%s: Close nic command returned error code %02x\n",dev->name, readb(xl_mmio + MMIO_MACDATA)) ;
+ }
+ }
+
+ /* Reset the upload and download logic */
+
+ writew(UPRESET, xl_mmio + MMIO_COMMAND) ;
+ t=jiffies;
+ while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
+ schedule();
+ if(jiffies-t > 10*HZ) {
+ printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPRESET not responding.\n", dev->name);
+ break ;
+ }
+ }
+ writew(DNRESET, xl_mmio + MMIO_COMMAND) ;
+ t=jiffies;
+ while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
+ schedule();
+ if(jiffies-t > 10*HZ) {
+ printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNRESET not responding.\n", dev->name);
+ break ;
+ }
+ }
+ xl_hw_reset(dev) ;
+ return 0 ;
+}
+
+static void xl_set_rx_mode(struct net_device *dev)
+{
+ struct xl_private *xl_priv = (struct xl_private *) dev->priv ;
+ struct dev_mc_list *dmi ;
+ unsigned char dev_mc_address[4] ;
+ u16 options ;
+ int i ;
+
+ if (dev->flags & IFF_PROMISC)
+ options = 0x0004 ;
+ else
+ options = 0x0000 ;
+
+ if (options ^ xl_priv->xl_copy_all_options) { /* Changed, must send command */
+ xl_priv->xl_copy_all_options = options ;
+ xl_srb_cmd(dev, SET_RECEIVE_MODE) ;
+ return ;
+ }
+
+ dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ;
+
+ for (i=0,dmi=dev->mc_list;i < dev->mc_count; i++,dmi = dmi->next) {
+ dev_mc_address[0] |= dmi->dmi_addr[2] ;
+ dev_mc_address[1] |= dmi->dmi_addr[3] ;
+ dev_mc_address[2] |= dmi->dmi_addr[4] ;
+ dev_mc_address[3] |= dmi->dmi_addr[5] ;
+ }
+
+ if (memcmp(xl_priv->xl_functional_addr,dev_mc_address,4) != 0) { /* Options have changed, run the command */
+ memcpy(xl_priv->xl_functional_addr, dev_mc_address,4) ;
+ xl_srb_cmd(dev, SET_FUNC_ADDRESS) ;
+ }
+ return ;
+}
+
+
+/*
+ * We issued an srb command and now we must read
+ * the response from the completed command.
+ */
+
+static void xl_srb_bh(struct net_device *dev)
+{
+ struct xl_private *xl_priv = (struct xl_private *) dev->priv ;
+ u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
+ u8 srb_cmd, ret_code ;
+ int i ;
+
+ writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ srb_cmd = readb(xl_mmio + MMIO_MACDATA) ;
+ writel((MEM_BYTE_READ | 0xd0000 | xl_priv->srb) +2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ ret_code = readb(xl_mmio + MMIO_MACDATA) ;
+
+ /* Ret_code is standard across all commands */
+
+ switch (ret_code) {
+ case 1:
+ printk(KERN_INFO "%s: Command: %d - Invalid Command code\n",dev->name,srb_cmd) ;
+ break ;
+ case 4:
+ printk(KERN_INFO "%s: Command: %d - Adapter is closed, must be open for this command \n",dev->name,srb_cmd) ;
+ break ;
+
+ case 6:
+ printk(KERN_INFO "%s: Command: %d - Options Invalid for command \n",dev->name,srb_cmd) ;
+ break ;
+
+ case 0: /* Successful command execution */
+ switch (srb_cmd) {
+ case READ_LOG: /* Returns 14 bytes of data from the NIC */
+ if(xl_priv->xl_message_level)
+ printk(KERN_INFO "%s: READ.LOG 14 bytes of data ",dev->name) ;
+ /*
+ * We still have to read the log even if message_level = 0 and we don't want
+ * to see it
+ */
+ for (i=0;i<14;i++) {
+ writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ if(xl_priv->xl_message_level)
+ printk("%02x:",readb(xl_mmio + MMIO_MACDATA)) ;
+ }
+ printk("\n") ;
+ break ;
+ case SET_FUNC_ADDRESS:
+ if(xl_priv->xl_message_level)
+ printk(KERN_INFO "%s: Functional Address Set \n",dev->name) ;
+ break ;
+ case CLOSE_NIC:
+ if(xl_priv->xl_message_level)
+ printk(KERN_INFO "%s: Received CLOSE_NIC interrupt in interrupt handler \n",dev->name) ;
+ break ;
+ case SET_MULTICAST_MODE:
+ if(xl_priv->xl_message_level)
+ printk(KERN_INFO "%s: Multicast options successfully changed\n",dev->name) ;
+ break ;
+ case SET_RECEIVE_MODE:
+ if(xl_priv->xl_message_level) {
+ if (xl_priv->xl_copy_all_options == 0x0004)
+ printk(KERN_INFO "%s: Entering promiscuous mode \n", dev->name) ;
+ else
+ printk(KERN_INFO "%s: Entering normal receive mode \n",dev->name) ;
+ }
+ break ;
+
+ } /* switch */
+ break ;
+ } /* switch */
+ return ;
+}
+
+static struct net_device_stats * xl_get_stats(struct net_device *dev)
+{
+ struct xl_private *xl_priv = (struct xl_private *) dev->priv ;
+ return (struct net_device_stats *) &xl_priv->xl_stats;
+}
+
+static int xl_set_mac_address (struct net_device *dev, void *addr)
+{
+ struct sockaddr *saddr = addr ;
+ struct xl_private *xl_priv = (struct xl_private *)dev->priv ;
+
+ if (netif_running(dev)) {
+ printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ;
+ return -EIO ;
+ }
+
+ memcpy(xl_priv->xl_laa, saddr->sa_data,dev->addr_len) ;
+
+ if (xl_priv->xl_message_level) {
+ printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev->name, xl_priv->xl_laa[0],
+ xl_priv->xl_laa[1], xl_priv->xl_laa[2],
+ xl_priv->xl_laa[3], xl_priv->xl_laa[4],
+ xl_priv->xl_laa[5]);
+ }
+
+ return 0 ;
+}
+
+static void xl_arb_cmd(struct net_device *dev)
+{
+ struct xl_private *xl_priv = (struct xl_private *) dev->priv;
+ u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
+ u8 arb_cmd ;
+ u16 lan_status, lan_status_diff ;
+
+ writel( ( MEM_BYTE_READ | 0xD0000 | xl_priv->arb), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ arb_cmd = readb(xl_mmio + MMIO_MACDATA) ;
+
+ if (arb_cmd == RING_STATUS_CHANGE) { /* Ring.Status.Change */
+ writel( ( (MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+
+ printk(KERN_INFO "%s: Ring Status Change: New Status = %04x\n", dev->name, ntohs(readw(xl_mmio + MMIO_MACDATA) )) ;
+
+ lan_status = ntohs(readw(xl_mmio + MMIO_MACDATA));
+
+ /* Acknowledge interrupt, this tells nic we are done with the arb */
+ writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
+
+ lan_status_diff = xl_priv->xl_lan_status ^ lan_status ;
+
+ if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) {
+ if (lan_status_diff & LSC_LWF)
+ printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name);
+ if (lan_status_diff & LSC_ARW)
+ printk(KERN_WARNING "%s: Auto removal error\n",dev->name);
+ if (lan_status_diff & LSC_FPE)
+ printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name);
+ if (lan_status_diff & LSC_RR)
+ printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name);
+
+ /* Adapter has been closed by the hardware */
+
+ netif_stop_queue(dev);
+ xl_freemem(dev) ;
+ free_irq(dev->irq,dev);
+
+ printk(KERN_WARNING "%s: Adapter has been closed \n", dev->name) ;
+ } /* If serious error */
+
+ if (xl_priv->xl_message_level) {
+ if (lan_status_diff & LSC_SIG_LOSS)
+ printk(KERN_WARNING "%s: No receive signal detected \n", dev->name) ;
+ if (lan_status_diff & LSC_HARD_ERR)
+ printk(KERN_INFO "%s: Beaconing \n",dev->name);
+ if (lan_status_diff & LSC_SOFT_ERR)
+ printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame \n",dev->name);
+ if (lan_status_diff & LSC_TRAN_BCN)
+ printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name);
+ if (lan_status_diff & LSC_SS)
+ printk(KERN_INFO "%s: Single Station on the ring \n", dev->name);
+ if (lan_status_diff & LSC_RING_REC)
+ printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name);
+ if (lan_status_diff & LSC_FDX_MODE)
+ printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name);
+ }
+
+ if (lan_status_diff & LSC_CO) {
+ if (xl_priv->xl_message_level)
+ printk(KERN_INFO "%s: Counter Overflow \n", dev->name);
+ /* Issue READ.LOG command */
+ xl_srb_cmd(dev, READ_LOG) ;
+ }
+
+ /* There is no command in the tech docs to issue the read_sr_counters */
+ if (lan_status_diff & LSC_SR_CO) {
+ if (xl_priv->xl_message_level)
+ printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name);
+ }
+
+ xl_priv->xl_lan_status = lan_status ;
+
+ } /* Lan.change.status */
+ else if ( arb_cmd == RECEIVE_DATA) { /* Received.Data */
+#if XL_DEBUG
+ printk(KERN_INFO "Received.Data \n") ;
+#endif
+ writel( ((MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ xl_priv->mac_buffer = ntohs(readw(xl_mmio + MMIO_MACDATA)) ;
+
+ /* Now we are going to be really basic here and not do anything
+ * with the data at all. The tech docs do not give me enough
+ * information to calculate the buffers properly so we're
+ * just going to tell the nic that we've dealt with the frame
+ * anyway.
+ */
+
+ dev->last_rx = jiffies ;
+ /* Acknowledge interrupt, this tells nic we are done with the arb */
+ writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
+
+ /* Is the ASB free ? */
+
+ xl_priv->asb_queued = 0 ;
+ writel( ((MEM_BYTE_READ | 0xD0000 | xl_priv->asb) + 2), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ if (readb(xl_mmio + MMIO_MACDATA) != 0xff) {
+ xl_priv->asb_queued = 1 ;
+
+ xl_wait_misr_flags(dev) ;
+
+ writel(MEM_BYTE_WRITE | MF_ASBFR, xl_mmio + MMIO_MAC_ACCESS_CMD);
+ writeb(0xff, xl_mmio + MMIO_MACDATA) ;
+ writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(MISR_ASBFR, xl_mmio + MMIO_MACDATA) ;
+ return ;
+ /* Drop out and wait for the bottom half to be run */
+ }
+
+ xl_asb_cmd(dev) ;
+
+ } else {
+ printk(KERN_WARNING "%s: Received unknown arb (xl_priv) command: %02x \n",dev->name,arb_cmd) ;
+ }
+
+ /* Acknowledge the arb interrupt */
+
+ writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
+
+ return ;
+}
+
+
+/*
+ * There is only one asb command, but we can get called from different
+ * places.
+ */
+
+static void xl_asb_cmd(struct net_device *dev)
+{
+ struct xl_private *xl_priv = (struct xl_private *) dev->priv ;
+ u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
+
+ if (xl_priv->asb_queued == 1)
+ writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ;
+
+ writel(MEM_BYTE_WRITE | 0xd0000 | xl_priv->asb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(0x81, xl_mmio + MMIO_MACDATA) ;
+
+ writel(MEM_WORD_WRITE | 0xd0000 | xl_priv->asb | 6, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(ntohs(xl_priv->mac_buffer), xl_mmio + MMIO_MACDATA) ;
+
+ xl_wait_misr_flags(dev) ;
+
+ writel(MEM_BYTE_WRITE | MF_RASB, xl_mmio + MMIO_MAC_ACCESS_CMD);
+ writeb(0xff, xl_mmio + MMIO_MACDATA) ;
+
+ writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(MISR_RASB, xl_mmio + MMIO_MACDATA) ;
+
+ xl_priv->asb_queued = 2 ;
+
+ return ;
+}
+
+/*
+ * This will only get called if there was an error
+ * from the asb cmd.
+ */
+static void xl_asb_bh(struct net_device *dev)
+{
+ struct xl_private *xl_priv = (struct xl_private *) dev->priv ;
+ u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
+ u8 ret_code ;
+
+ writel(MMIO_BYTE_READ | 0xd0000 | xl_priv->asb | 2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ ret_code = readb(xl_mmio + MMIO_MACDATA) ;
+ switch (ret_code) {
+ case 0x01:
+ printk(KERN_INFO "%s: ASB Command, unrecognized command code \n",dev->name) ;
+ break ;
+ case 0x26:
+ printk(KERN_INFO "%s: ASB Command, unexpected receive buffer \n", dev->name) ;
+ break ;
+ case 0x40:
+ printk(KERN_INFO "%s: ASB Command, Invalid Station ID \n", dev->name) ;
+ break ;
+ }
+ xl_priv->asb_queued = 0 ;
+ writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ;
+ return ;
+}
+
+/*
+ * Issue srb commands to the nic
+ */
+
+static void xl_srb_cmd(struct net_device *dev, int srb_cmd)
+{
+ struct xl_private *xl_priv = (struct xl_private *) dev->priv ;
+ u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
+
+ switch (srb_cmd) {
+ case READ_LOG:
+ writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(READ_LOG, xl_mmio + MMIO_MACDATA) ;
+ break;
+
+ case CLOSE_NIC:
+ writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(CLOSE_NIC, xl_mmio + MMIO_MACDATA) ;
+ break ;
+
+ case SET_RECEIVE_MODE:
+ writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(SET_RECEIVE_MODE, xl_mmio + MMIO_MACDATA) ;
+ writel(MEM_WORD_WRITE | 0xD0000 | xl_priv->srb | 4, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writew(xl_priv->xl_copy_all_options, xl_mmio + MMIO_MACDATA) ;
+ break ;
+
+ case SET_FUNC_ADDRESS:
+ writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(SET_FUNC_ADDRESS, xl_mmio + MMIO_MACDATA) ;
+ writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 6 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(xl_priv->xl_functional_addr[0], xl_mmio + MMIO_MACDATA) ;
+ writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 7 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(xl_priv->xl_functional_addr[1], xl_mmio + MMIO_MACDATA) ;
+ writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 8 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(xl_priv->xl_functional_addr[2], xl_mmio + MMIO_MACDATA) ;
+ writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 9 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(xl_priv->xl_functional_addr[3], xl_mmio + MMIO_MACDATA) ;
+ break ;
+ } /* switch */
+
+
+ xl_wait_misr_flags(dev) ;
+
+ /* Write 0xff to the CSRB flag */
+ writel(MEM_BYTE_WRITE | MF_CSRB , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(0xFF, xl_mmio + MMIO_MACDATA) ;
+ /* Set csrb bit in MISR register to process command */
+ writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(MISR_CSRB, xl_mmio + MMIO_MACDATA) ;
+ xl_priv->srb_queued = 1 ;
+
+ return ;
+}
+
+/*
+ * This is nasty, to use the MISR command you have to wait for 6 memory locations
+ * to be zero. This is the way the driver does on other OS'es so we should be ok with
+ * the empty loop.
+ */
+
+static void xl_wait_misr_flags(struct net_device *dev)
+{
+ struct xl_private *xl_priv = (struct xl_private *) dev->priv ;
+ u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
+
+ int i ;
+
+ writel(MMIO_BYTE_READ | MISR_RW, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ if (readb(xl_mmio + MMIO_MACDATA) != 0) { /* Misr not clear */
+ for (i=0; i<6; i++) {
+ writel(MEM_BYTE_READ | 0xDFFE0 | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ while (readb(xl_mmio + MMIO_MACDATA) != 0 ) {} ; /* Empty Loop */
+ }
+ }
+
+ writel(MMIO_BYTE_WRITE | MISR_AND, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
+ writeb(0x80, xl_mmio + MMIO_MACDATA) ;
+
+ return ;
+}
+
+/*
+ * Change mtu size, this should work the same as olympic
+ */
+
+static int xl_change_mtu(struct net_device *dev, int mtu)
+{
+ struct xl_private *xl_priv = (struct xl_private *) dev->priv;
+ u16 max_mtu ;
+
+ if (xl_priv->xl_ring_speed == 4)
+ max_mtu = 4500 ;
+ else
+ max_mtu = 18000 ;
+
+ if (mtu > max_mtu)
+ return -EINVAL ;
+ if (mtu < 100)
+ return -EINVAL ;
+
+ dev->mtu = mtu ;
+ xl_priv->pkt_buf_sz = mtu + TR_HLEN ;
+
+ return 0 ;
+}
+
+static void __devexit xl_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct xl_private *xl_priv=(struct xl_private *)dev->priv;
+
+ unregister_netdev(dev);
+ iounmap(xl_priv->xl_mmio) ;
+ pci_release_regions(pdev) ;
+ pci_set_drvdata(pdev,NULL) ;
+ free_netdev(dev);
+ return ;
+}
+
+static struct pci_driver xl_3c359_driver = {
+ .name = "3c359",
+ .id_table = xl_pci_tbl,
+ .probe = xl_probe,
+ .remove = __devexit_p(xl_remove_one),
+};
+
+static int __init xl_pci_init (void)
+{
+ return pci_module_init (&xl_3c359_driver);
+}
+
+
+static void __exit xl_pci_cleanup (void)
+{
+ pci_unregister_driver (&xl_3c359_driver);
+}
+
+module_init(xl_pci_init);
+module_exit(xl_pci_cleanup);
+
+MODULE_LICENSE("GPL") ;