aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/tulip/dmfe.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tulip/dmfe.c')
-rw-r--r--drivers/net/tulip/dmfe.c204
1 files changed, 138 insertions, 66 deletions
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 7f59a3d4fda..24a29c99ba9 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -143,9 +143,16 @@
#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */
#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */
-#define DMFE_DBUG(dbug_now, msg, value) if (dmfe_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
+#define DMFE_DBUG(dbug_now, msg, value) \
+ do { \
+ if (dmfe_debug || (dbug_now)) \
+ printk(KERN_ERR DRV_NAME ": %s %lx\n",\
+ (msg), (long) (value)); \
+ } while (0)
-#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+#define SHOW_MEDIA_TYPE(mode) \
+ printk (KERN_INFO DRV_NAME ": Change Speed to %sMhz %s duplex\n" , \
+ (mode & 1) ? "100":"10", (mode & 4) ? "full":"half");
/* CR9 definition: SROM/MII */
@@ -163,10 +170,20 @@
#define SROM_V41_CODE 0x14
-#define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);
+#define SROM_CLK_WRITE(data, ioaddr) \
+ outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+ udelay(5);
+
+#define __CHK_IO_SIZE(pci_id, dev_rev) \
+ (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? \
+ DM9102A_IO_SIZE: DM9102_IO_SIZE)
-#define __CHK_IO_SIZE(pci_id, dev_rev) ( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? DM9102A_IO_SIZE: DM9102_IO_SIZE
-#define CHK_IO_SIZE(pci_dev, dev_rev) __CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev)
+#define CHK_IO_SIZE(pci_dev, dev_rev) \
+ (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev))
/* Sten Check */
#define DEVICE net_device
@@ -187,7 +204,7 @@ struct rx_desc {
struct dmfe_board_info {
u32 chip_id; /* Chip vendor/Device ID */
u32 chip_revision; /* Chip revision */
- struct DEVICE *dev; /* net device */
+ struct DEVICE *next_dev; /* next device */
struct pci_dev *pdev; /* PCI device */
spinlock_t lock;
@@ -231,7 +248,6 @@ struct dmfe_board_info {
u8 media_mode; /* user specify media mode */
u8 op_mode; /* real work media mode */
u8 phy_addr;
- u8 link_failed; /* Ever link failed */
u8 wait_reset; /* Hardware failed, need to reset */
u8 dm910x_chk_mode; /* Operating mode check */
u8 first_in_callback; /* Flag to record state */
@@ -329,7 +345,7 @@ static void dmfe_program_DM9802(struct dmfe_board_info *);
static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * );
static void dmfe_set_phyxcer(struct dmfe_board_info *);
-/* DM910X network baord routine ---------------------------- */
+/* DM910X network board routine ---------------------------- */
/*
* Search DM910X board ,allocate space and register it
@@ -356,7 +372,8 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
- printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+ printk(KERN_WARNING DRV_NAME
+ ": 32-bit PCI DMA not available.\n");
err = -ENODEV;
goto err_out_free;
}
@@ -399,11 +416,12 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
/* Init system & device */
db = netdev_priv(dev);
- db->dev = dev;
-
/* Allocate Tx/Rx descriptor memory */
- db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
- db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
+ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) *
+ DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+
+ db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC *
+ TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
db->first_tx_desc_dma = db->desc_pool_dma_ptr;
@@ -428,7 +446,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
dev->poll_controller = &poll_dmfe;
#endif
dev->ethtool_ops = &netdev_ethtool_ops;
- netif_carrier_off(db->dev);
+ netif_carrier_off(dev);
spin_lock_init(&db->lock);
pci_read_config_dword(pdev, 0x50, &pci_pmr);
@@ -440,7 +458,8 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
/* read 64 word srom data */
for (i = 0; i < 64; i++)
- ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
+ ((u16 *) db->srom)[i] =
+ cpu_to_le16(read_srom_word(db->ioaddr, i));
/* Set Node address */
for (i = 0; i < 6; i++)
@@ -482,14 +501,17 @@ static void __devexit dmfe_remove_one (struct pci_dev *pdev)
DMFE_DBUG(0, "dmfe_remove_one()", 0);
if (dev) {
+
+ unregister_netdev(dev);
+
pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
db->desc_pool_dma_ptr);
pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
db->buf_pool_ptr, db->buf_pool_dma_ptr);
- unregister_netdev(dev);
pci_release_regions(pdev);
free_netdev(dev); /* free board information */
+
pci_set_drvdata(pdev, NULL);
}
@@ -509,7 +531,8 @@ static int dmfe_open(struct DEVICE *dev)
DMFE_DBUG(0, "dmfe_open", 0);
- ret = request_irq(dev->irq, &dmfe_interrupt, IRQF_SHARED, dev->name, dev);
+ ret = request_irq(dev->irq, &dmfe_interrupt,
+ IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
@@ -518,7 +541,6 @@ static int dmfe_open(struct DEVICE *dev)
db->tx_packet_cnt = 0;
db->tx_queue_cnt = 0;
db->rx_avail_cnt = 0;
- db->link_failed = 1;
db->wait_reset = 0;
db->first_in_callback = 0;
@@ -650,7 +672,8 @@ static int dmfe_start_xmit(struct sk_buff *skb, struct DEVICE *dev)
/* No Tx resource check, it never happen nromally */
if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) {
spin_unlock_irqrestore(&db->lock, flags);
- printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_queue_cnt);
+ printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n",
+ db->tx_queue_cnt);
return 1;
}
@@ -722,7 +745,8 @@ static int dmfe_stop(struct DEVICE *dev)
#if 0
/* show statistic counter */
- printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
+ printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx"
+ " LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
db->tx_fifo_underrun, db->tx_excessive_collision,
db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
@@ -905,7 +929,7 @@ static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag)
static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
{
struct rx_desc *rxptr;
- struct sk_buff *skb;
+ struct sk_buff *skb, *newskb;
int rxlen;
u32 rdes0;
@@ -919,7 +943,9 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
db->rx_avail_cnt--;
db->interval_rx_cnt++;
- pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+ pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2),
+ RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+
if ( (rdes0 & 0x300) != 0x300) {
/* A packet without First/Last flag */
/* reuse this SKB */
@@ -956,9 +982,11 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
} else {
/* Good packet, send to upper layer */
/* Shorst packet used new SKB */
- if ( (rxlen < RX_COPY_SIZE) &&
- ( (skb = dev_alloc_skb(rxlen + 2) )
- != NULL) ) {
+ if ((rxlen < RX_COPY_SIZE) &&
+ ((newskb = dev_alloc_skb(rxlen + 2))
+ != NULL)) {
+
+ skb = newskb;
/* size less than COPY_SIZE, allocate a rxlen SKB */
skb->dev = dev;
skb_reserve(skb, 2); /* 16byte align */
@@ -1069,6 +1097,8 @@ static void dmfe_timer(unsigned long data)
struct dmfe_board_info *db = netdev_priv(dev);
unsigned long flags;
+ int link_ok, link_ok_phy;
+
DMFE_DBUG(0, "dmfe_timer()", 0);
spin_lock_irqsave(&db->lock, flags);
@@ -1078,7 +1108,8 @@ static void dmfe_timer(unsigned long data)
if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) {
db->cr6_data &= ~0x40000;
update_cr6(db->cr6_data, db->ioaddr);
- phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+ phy_write(db->ioaddr,
+ db->phy_addr, 0, 0x1000, db->chip_id);
db->cr6_data |= 0x40000;
update_cr6(db->cr6_data, db->ioaddr);
db->timer.expires = DMFE_TIMER_WUT + HZ * 2;
@@ -1139,21 +1170,41 @@ static void dmfe_timer(unsigned long data)
(db->chip_revision == 0x02000010)) ) {
/* DM9102A Chip */
if (tmp_cr12 & 2)
- tmp_cr12 = 0x0; /* Link failed */
+ link_ok = 0;
else
- tmp_cr12 = 0x3; /* Link OK */
+ link_ok = 1;
}
+ else
+ /*0x43 is used instead of 0x3 because bit 6 should represent
+ link status of external PHY */
+ link_ok = (tmp_cr12 & 0x43) ? 1 : 0;
+
+
+ /* If chip reports that link is failed it could be because external
+ PHY link status pin is not conected correctly to chip
+ To be sure ask PHY too.
+ */
+
+ /* need a dummy read because of PHY's register latch*/
+ phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id);
+ link_ok_phy = (phy_read (db->ioaddr,
+ db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0;
- if ( !(tmp_cr12 & 0x3) && !db->link_failed ) {
+ if (link_ok_phy != link_ok) {
+ DMFE_DBUG (0, "PHY and chip report different link status", 0);
+ link_ok = link_ok | link_ok_phy;
+ }
+
+ if ( !link_ok && netif_carrier_ok(dev)) {
/* Link Failed */
DMFE_DBUG(0, "Link Failed", tmp_cr12);
- db->link_failed = 1;
- netif_carrier_off(db->dev);
+ netif_carrier_off(dev);
/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
/* AUTO or force 1M Homerun/Longrun don't need */
if ( !(db->media_mode & 0x38) )
- phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+ phy_write(db->ioaddr, db->phy_addr,
+ 0, 0x1000, db->chip_id);
/* AUTO mode, if INT phyxcer link failed, select EXT device */
if (db->media_mode & DMFE_AUTO) {
@@ -1162,21 +1213,19 @@ static void dmfe_timer(unsigned long data)
db->cr6_data&=~0x00000200; /* bit9=0, HD mode */
update_cr6(db->cr6_data, db->ioaddr);
}
- } else
- if ((tmp_cr12 & 0x3) && db->link_failed) {
- DMFE_DBUG(0, "Link link OK", tmp_cr12);
- db->link_failed = 0;
-
- /* Auto Sense Speed */
- if ( (db->media_mode & DMFE_AUTO) &&
- dmfe_sense_speed(db) )
- db->link_failed = 1;
- else
- netif_carrier_on(db->dev);
- dmfe_process_mode(db);
- /* SHOW_MEDIA_TYPE(db->op_mode); */
+ } else if (!netif_carrier_ok(dev)) {
+
+ DMFE_DBUG(0, "Link link OK", tmp_cr12);
+
+ /* Auto Sense Speed */
+ if ( !(db->media_mode & DMFE_AUTO) || !dmfe_sense_speed(db)) {
+ netif_carrier_on(dev);
+ SHOW_MEDIA_TYPE(db->op_mode);
}
+ dmfe_process_mode(db);
+ }
+
/* HPNA remote command check */
if (db->HPNA_command & 0xf00) {
db->HPNA_timer--;
@@ -1221,7 +1270,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev)
db->tx_packet_cnt = 0;
db->tx_queue_cnt = 0;
db->rx_avail_cnt = 0;
- db->link_failed = 1;
+ netif_carrier_off(dev);
db->wait_reset = 0;
/* Re-initilize DM910X board */
@@ -1259,7 +1308,8 @@ static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb)
if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
rxptr->rx_skb_ptr = skb;
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev,
+ skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
db->rx_avail_cnt++;
@@ -1291,8 +1341,11 @@ static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioadd
outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
/* rx descriptor start pointer */
- db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
- db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->first_rx_desc = (void *)db->first_tx_desc +
+ sizeof(struct tx_desc) * TX_DESC_CNT;
+
+ db->first_rx_desc_dma = db->first_tx_desc_dma +
+ sizeof(struct tx_desc) * TX_DESC_CNT;
db->rx_insert_ptr = db->first_rx_desc;
db->rx_ready_ptr = db->first_rx_desc;
outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
@@ -1470,7 +1523,8 @@ static void allocate_rx_buffer(struct dmfe_board_info *db)
if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
break;
rxptr->rx_skb_ptr = skb; /* FIXME (?) */
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data,
+ RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
rxptr = rxptr->next_rx_desc;
@@ -1510,7 +1564,8 @@ static u16 read_srom_word(long ioaddr, int offset)
for (i = 16; i > 0; i--) {
outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
udelay(5);
- srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
+ srom_data = (srom_data << 1) |
+ ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
udelay(5);
}
@@ -1537,9 +1592,11 @@ static u8 dmfe_sense_speed(struct dmfe_board_info * db)
if ( (phy_mode & 0x24) == 0x24 ) {
if (db->chip_id == PCI_DM9132_ID) /* DM9132 */
- phy_mode = phy_read(db->ioaddr, db->phy_addr, 7, db->chip_id) & 0xf000;
+ phy_mode = phy_read(db->ioaddr,
+ db->phy_addr, 7, db->chip_id) & 0xf000;
else /* DM9102/DM9102A */
- phy_mode = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0xf000;
+ phy_mode = phy_read(db->ioaddr,
+ db->phy_addr, 17, db->chip_id) & 0xf000;
/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
switch (phy_mode) {
case 0x1000: db->op_mode = DMFE_10MHF; break;
@@ -1576,8 +1633,11 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *db)
/* DM9009 Chip: Phyxcer reg18 bit12=0 */
if (db->chip_id == PCI_DM9009_ID) {
- phy_reg = phy_read(db->ioaddr, db->phy_addr, 18, db->chip_id) & ~0x1000;
- phy_write(db->ioaddr, db->phy_addr, 18, phy_reg, db->chip_id);
+ phy_reg = phy_read(db->ioaddr,
+ db->phy_addr, 18, db->chip_id) & ~0x1000;
+
+ phy_write(db->ioaddr,
+ db->phy_addr, 18, phy_reg, db->chip_id);
}
/* Phyxcer capability setting */
@@ -1650,10 +1710,12 @@ static void dmfe_process_mode(struct dmfe_board_info *db)
case DMFE_100MHF: phy_reg = 0x2000; break;
case DMFE_100MFD: phy_reg = 0x2100; break;
}
- phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+ phy_write(db->ioaddr,
+ db->phy_addr, 0, phy_reg, db->chip_id);
if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
mdelay(20);
- phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+ phy_write(db->ioaddr,
+ db->phy_addr, 0, phy_reg, db->chip_id);
}
}
}
@@ -1663,7 +1725,8 @@ static void dmfe_process_mode(struct dmfe_board_info *db)
* Write a word to Phy register
*/
-static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id)
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+ u16 phy_data, u32 chip_id)
{
u16 i;
unsigned long ioaddr;
@@ -1689,11 +1752,13 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data
/* Send Phy address */
for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+ phy_write_1bit(ioaddr,
+ phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
/* Send register address */
for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0);
+ phy_write_1bit(ioaddr,
+ offset & i ? PHY_DATA_1 : PHY_DATA_0);
/* written trasnition */
phy_write_1bit(ioaddr, PHY_DATA_1);
@@ -1701,7 +1766,8 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data
/* Write a word data to PHY controller */
for ( i = 0x8000; i > 0; i >>= 1)
- phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
+ phy_write_1bit(ioaddr,
+ phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
}
}
@@ -1738,11 +1804,13 @@ static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
/* Send Phy address */
for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+ phy_write_1bit(ioaddr,
+ phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
/* Send register address */
for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0);
+ phy_write_1bit(ioaddr,
+ offset & i ? PHY_DATA_1 : PHY_DATA_0);
/* Skip transition state */
phy_read_1bit(ioaddr);
@@ -1963,7 +2031,8 @@ static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db)
/* Check remote device status match our setting ot not */
if ( phy_reg != (db->HPNA_command & 0x0f00) ) {
- phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
+ phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command,
+ db->chip_id);
db->HPNA_timer=8;
} else
db->HPNA_timer=600; /* Match, every 10 minutes, check */
@@ -2003,8 +2072,11 @@ module_param(HPNA_tx_cmd, byte, 0);
module_param(HPNA_NoiseFloor, byte, 0);
module_param(SF_mode, byte, 0);
MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)");
-MODULE_PARM_DESC(mode, "Davicom DM9xxx: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
-MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function (bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)");
+MODULE_PARM_DESC(mode, "Davicom DM9xxx: "
+ "Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
+
+MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
+ "(bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)");
/* Description:
* when user used insmod to add module, system invoked init_module()
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-15 23:02:52 +0000