aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/tulip/xircom_tulip_cb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tulip/xircom_tulip_cb.c')
-rw-r--r--drivers/net/tulip/xircom_tulip_cb.c1748
1 files changed, 1748 insertions, 0 deletions
diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
new file mode 100644
index 00000000000..32ccb26890c
--- /dev/null
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -0,0 +1,1748 @@
+/* xircom_tulip_cb.c: A Xircom CBE-100 ethernet driver for Linux. */
+/*
+ Written/copyright 1994-1999 by Donald Becker.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ -----------------------------------------------------------
+
+ Linux kernel-specific changes:
+
+ LK1.0 (Ion Badulescu)
+ - Major cleanup
+ - Use 2.4 PCI API
+ - Support ethtool
+ - Rewrite perfect filter/hash code
+ - Use interrupts for media changes
+
+ LK1.1 (Ion Badulescu)
+ - Disallow negotiation of unsupported full-duplex modes
+*/
+
+#define DRV_NAME "xircom_tulip_cb"
+#define DRV_VERSION "0.91+LK1.1"
+#define DRV_RELDATE "October 11, 2001"
+
+#define CARDBUS 1
+
+/* A few user-configurable values. */
+
+#define xircom_debug debug
+#ifdef XIRCOM_DEBUG
+static int xircom_debug = XIRCOM_DEBUG;
+#else
+static int xircom_debug = 1;
+#endif
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 25;
+
+#define MAX_UNITS 4
+/* Used to pass the full-duplex flag, etc. */
+static int full_duplex[MAX_UNITS];
+static int options[MAX_UNITS];
+static int mtu[MAX_UNITS]; /* Jumbo MTU for interfaces. */
+
+/* Keep the ring sizes a power of two for efficiency.
+ Making the Tx ring too large decreases the effectiveness of channel
+ bonding and packet priority.
+ There are no ill effects from too-large receive rings. */
+#define TX_RING_SIZE 16
+#define RX_RING_SIZE 32
+
+/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
+#ifdef __alpha__
+static int rx_copybreak = 1518;
+#else
+static int rx_copybreak = 100;
+#endif
+
+/*
+ Set the bus performance register.
+ Typical: Set 16 longword cache alignment, no burst limit.
+ Cache alignment bits 15:14 Burst length 13:8
+ 0000 No alignment 0x00000000 unlimited 0800 8 longwords
+ 4000 8 longwords 0100 1 longword 1000 16 longwords
+ 8000 16 longwords 0200 2 longwords 2000 32 longwords
+ C000 32 longwords 0400 4 longwords
+ Warning: many older 486 systems are broken and require setting 0x00A04800
+ 8 longword cache alignment, 8 longword burst.
+ ToDo: Non-Intel setting could be better.
+*/
+
+#if defined(__alpha__) || defined(__ia64__) || defined(__x86_64__)
+static int csr0 = 0x01A00000 | 0xE000;
+#elif defined(__powerpc__)
+static int csr0 = 0x01B00000 | 0x8000;
+#elif defined(__sparc__)
+static int csr0 = 0x01B00080 | 0x8000;
+#elif defined(__i386__)
+static int csr0 = 0x01A00000 | 0x8000;
+#else
+#warning Processor architecture undefined!
+static int csr0 = 0x00A00000 | 0x4800;
+#endif
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (4 * HZ)
+#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
+#define PKT_SETUP_SZ 192 /* Size of the setup frame */
+
+/* PCI registers */
+#define PCI_POWERMGMT 0x40
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+
+#include <asm/io.h>
+#include <asm/processor.h> /* Processor type for cache alignment. */
+#include <asm/uaccess.h>
+
+
+/* These identify the driver base version and may not be removed. */
+static char version[] __devinitdata =
+KERN_INFO DRV_NAME ".c derived from tulip.c:v0.91 4/14/99 becker@scyld.com\n"
+KERN_INFO " unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE "\n";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("Xircom CBE-100 ethernet driver");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(debug, int, 0);
+module_param(max_interrupt_work, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param(csr0, int, 0);
+
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+
+#define RUN_AT(x) (jiffies + (x))
+
+/*
+ Theory of Operation
+
+I. Board Compatibility
+
+This device driver was forked from the driver for the DECchip "Tulip",
+Digital's single-chip ethernet controllers for PCI. It supports Xircom's
+almost-Tulip-compatible CBE-100 CardBus adapters.
+
+II. Board-specific settings
+
+PCI bus devices are configured by the system at boot time, so no jumpers
+need to be set on the board. The system BIOS preferably should assign the
+PCI INTA signal to an otherwise unused system IRQ line.
+
+III. Driver operation
+
+IIIa. Ring buffers
+
+The Xircom can use either ring buffers or lists of Tx and Rx descriptors.
+This driver uses statically allocated rings of Rx and Tx descriptors, set at
+compile time by RX/TX_RING_SIZE. This version of the driver allocates skbuffs
+for the Rx ring buffers at open() time and passes the skb->data field to the
+Xircom as receive data buffers. When an incoming frame is less than
+RX_COPYBREAK bytes long, a fresh skbuff is allocated and the frame is
+copied to the new skbuff. When the incoming frame is larger, the skbuff is
+passed directly up the protocol stack and replaced by a newly allocated
+skbuff.
+
+The RX_COPYBREAK value is chosen to trade-off the memory wasted by
+using a full-sized skbuff for small frames vs. the copying costs of larger
+frames. For small frames the copying cost is negligible (esp. considering
+that we are pre-loading the cache with immediately useful header
+information). For large frames the copying cost is non-trivial, and the
+larger copy might flush the cache of useful data. A subtle aspect of this
+choice is that the Xircom only receives into longword aligned buffers, thus
+the IP header at offset 14 isn't longword aligned for further processing.
+Copied frames are put into the new skbuff at an offset of "+2", thus copying
+has the beneficial effect of aligning the IP header and preloading the
+cache.
+
+IIIC. Synchronization
+The driver runs as two independent, single-threaded flows of control. One
+is the send-packet routine, which enforces single-threaded use by the
+dev->tbusy flag. The other thread is the interrupt handler, which is single
+threaded by the hardware and other software.
+
+The send packet thread has partial control over the Tx ring and 'dev->tbusy'
+flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next
+queue slot is empty, it clears the tbusy flag when finished otherwise it sets
+the 'tp->tx_full' flag.
+
+The interrupt handler has exclusive control over the Rx ring and records stats
+from the Tx ring. (The Tx-done interrupt can't be selectively turned off, so
+we can't avoid the interrupt overhead by having the Tx routine reap the Tx
+stats.) After reaping the stats, it marks the queue entry as empty by setting
+the 'base' to zero. Iff the 'tp->tx_full' flag is set, it clears both the
+tx_full and tbusy flags.
+
+IV. Notes
+
+IVb. References
+
+http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
+http://www.digital.com (search for current 21*4* datasheets and "21X4 SROM")
+http://www.national.com/pf/DP/DP83840A.html
+
+IVc. Errata
+
+*/
+
+/* A full-duplex map for media types. */
+enum MediaIs {
+ MediaIsFD = 1, MediaAlwaysFD=2, MediaIsMII=4, MediaIsFx=8,
+ MediaIs100=16};
+static const char media_cap[] =
+{0,0,0,16, 3,19,16,24, 27,4,7,5, 0,20,23,20 };
+
+/* Offsets to the Command and Status Registers, "CSRs". All accesses
+ must be longword instructions and quadword aligned. */
+enum xircom_offsets {
+ CSR0=0, CSR1=0x08, CSR2=0x10, CSR3=0x18, CSR4=0x20, CSR5=0x28,
+ CSR6=0x30, CSR7=0x38, CSR8=0x40, CSR9=0x48, CSR10=0x50, CSR11=0x58,
+ CSR12=0x60, CSR13=0x68, CSR14=0x70, CSR15=0x78, CSR16=0x04, };
+
+/* The bits in the CSR5 status registers, mostly interrupt sources. */
+enum status_bits {
+ LinkChange=0x08000000,
+ NormalIntr=0x10000, NormalIntrMask=0x00014045,
+ AbnormalIntr=0x8000, AbnormalIntrMask=0x0a00a5a2,
+ ReservedIntrMask=0xe0001a18,
+ EarlyRxIntr=0x4000, BusErrorIntr=0x2000,
+ EarlyTxIntr=0x400, RxDied=0x100, RxNoBuf=0x80, RxIntr=0x40,
+ TxFIFOUnderflow=0x20, TxNoBuf=0x04, TxDied=0x02, TxIntr=0x01,
+};
+
+enum csr0_control_bits {
+ EnableMWI=0x01000000, EnableMRL=0x00800000,
+ EnableMRM=0x00200000, EqualBusPrio=0x02,
+ SoftwareReset=0x01,
+};
+
+enum csr6_control_bits {
+ ReceiveAllBit=0x40000000, AllMultiBit=0x80, PromiscBit=0x40,
+ HashFilterBit=0x01, FullDuplexBit=0x0200,
+ TxThresh10=0x400000, TxStoreForw=0x200000,
+ TxThreshMask=0xc000, TxThreshShift=14,
+ EnableTx=0x2000, EnableRx=0x02,
+ ReservedZeroMask=0x8d930134, ReservedOneMask=0x320c0000,
+ EnableTxRx=(EnableTx | EnableRx),
+};
+
+
+enum tbl_flag {
+ HAS_MII=1, HAS_ACPI=2,
+};
+static struct xircom_chip_table {
+ char *chip_name;
+ int valid_intrs; /* CSR7 interrupt enable settings */
+ int flags;
+} xircom_tbl[] = {
+ { "Xircom Cardbus Adapter",
+ LinkChange | NormalIntr | AbnormalIntr | BusErrorIntr |
+ RxDied | RxNoBuf | RxIntr | TxFIFOUnderflow | TxNoBuf | TxDied | TxIntr,
+ HAS_MII | HAS_ACPI, },
+ { NULL, },
+};
+/* This matches the table above. */
+enum chips {
+ X3201_3,
+};
+
+
+/* The Xircom Rx and Tx buffer descriptors. */
+struct xircom_rx_desc {
+ s32 status;
+ s32 length;
+ u32 buffer1, buffer2;
+};
+
+struct xircom_tx_desc {
+ s32 status;
+ s32 length;
+ u32 buffer1, buffer2; /* We use only buffer 1. */
+};
+
+enum tx_desc0_status_bits {
+ Tx0DescOwned=0x80000000, Tx0DescError=0x8000, Tx0NoCarrier=0x0800,
+ Tx0LateColl=0x0200, Tx0ManyColl=0x0100, Tx0Underflow=0x02,
+};
+enum tx_desc1_status_bits {
+ Tx1ComplIntr=0x80000000, Tx1LastSeg=0x40000000, Tx1FirstSeg=0x20000000,
+ Tx1SetupPkt=0x08000000, Tx1DisableCRC=0x04000000, Tx1RingWrap=0x02000000,
+ Tx1ChainDesc=0x01000000, Tx1NoPad=0x800000, Tx1HashSetup=0x400000,
+ Tx1WholePkt=(Tx1FirstSeg | Tx1LastSeg),
+};
+enum rx_desc0_status_bits {
+ Rx0DescOwned=0x80000000, Rx0DescError=0x8000, Rx0NoSpace=0x4000,
+ Rx0Runt=0x0800, Rx0McastPkt=0x0400, Rx0FirstSeg=0x0200, Rx0LastSeg=0x0100,
+ Rx0HugeFrame=0x80, Rx0CRCError=0x02,
+ Rx0WholePkt=(Rx0FirstSeg | Rx0LastSeg),
+};
+enum rx_desc1_status_bits {
+ Rx1RingWrap=0x02000000, Rx1ChainDesc=0x01000000,
+};
+
+struct xircom_private {
+ struct xircom_rx_desc rx_ring[RX_RING_SIZE];
+ struct xircom_tx_desc tx_ring[TX_RING_SIZE];
+ /* The saved address of a sent-in-place packet/buffer, for skfree(). */
+ struct sk_buff* tx_skbuff[TX_RING_SIZE];
+#ifdef CARDBUS
+ /* The X3201-3 requires 4-byte aligned tx bufs */
+ struct sk_buff* tx_aligned_skbuff[TX_RING_SIZE];
+#endif
+ /* The addresses of receive-in-place skbuffs. */
+ struct sk_buff* rx_skbuff[RX_RING_SIZE];
+ u16 setup_frame[PKT_SETUP_SZ / sizeof(u16)]; /* Pseudo-Tx frame to init address table. */
+ int chip_id;
+ struct net_device_stats stats;
+ unsigned int cur_rx, cur_tx; /* The next free ring entry */
+ unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
+ unsigned int tx_full:1; /* The Tx queue is full. */
+ unsigned int speed100:1;
+ unsigned int full_duplex:1; /* Full-duplex operation requested. */
+ unsigned int autoneg:1;
+ unsigned int default_port:4; /* Last dev->if_port value. */
+ unsigned int open:1;
+ unsigned int csr0; /* CSR0 setting. */
+ unsigned int csr6; /* Current CSR6 control settings. */
+ u16 to_advertise; /* NWay capabilities advertised. */
+ u16 advertising[4];
+ signed char phys[4], mii_cnt; /* MII device addresses. */
+ int saved_if_port;
+ struct pci_dev *pdev;
+ spinlock_t lock;
+};
+
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static void xircom_up(struct net_device *dev);
+static void xircom_down(struct net_device *dev);
+static int xircom_open(struct net_device *dev);
+static void xircom_tx_timeout(struct net_device *dev);
+static void xircom_init_ring(struct net_device *dev);
+static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int xircom_rx(struct net_device *dev);
+static void xircom_media_change(struct net_device *dev);
+static irqreturn_t xircom_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static int xircom_close(struct net_device *dev);
+static struct net_device_stats *xircom_get_stats(struct net_device *dev);
+static int xircom_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void set_rx_mode(struct net_device *dev);
+static void check_duplex(struct net_device *dev);
+static struct ethtool_ops ops;
+
+
+/* The Xircom cards are picky about when certain bits in CSR6 can be
+ manipulated. Keith Owens <kaos@ocs.com.au>. */
+static void outl_CSR6(u32 newcsr6, long ioaddr)
+{
+ const int strict_bits =
+ TxThresh10 | TxStoreForw | TxThreshMask | EnableTxRx | FullDuplexBit;
+ int csr5, csr5_22_20, csr5_19_17, currcsr6, attempts = 200;
+ unsigned long flags;
+ save_flags(flags);
+ cli();
+ /* mask out the reserved bits that always read 0 on the Xircom cards */
+ newcsr6 &= ~ReservedZeroMask;
+ /* or in the reserved bits that always read 1 */
+ newcsr6 |= ReservedOneMask;
+ currcsr6 = inl(ioaddr + CSR6);
+ if (((newcsr6 & strict_bits) == (currcsr6 & strict_bits)) ||
+ ((currcsr6 & ~EnableTxRx) == 0)) {
+ outl(newcsr6, ioaddr + CSR6); /* safe */
+ restore_flags(flags);
+ return;
+ }
+ /* make sure the transmitter and receiver are stopped first */
+ currcsr6 &= ~EnableTxRx;
+ while (1) {
+ csr5 = inl(ioaddr + CSR5);
+ if (csr5 == 0xffffffff)
+ break; /* cannot read csr5, card removed? */
+ csr5_22_20 = csr5 & 0x700000;
+ csr5_19_17 = csr5 & 0x0e0000;
+ if ((csr5_22_20 == 0 || csr5_22_20 == 0x600000) &&
+ (csr5_19_17 == 0 || csr5_19_17 == 0x80000 || csr5_19_17 == 0xc0000))
+ break; /* both are stopped or suspended */
+ if (!--attempts) {
+ printk(KERN_INFO DRV_NAME ": outl_CSR6 too many attempts,"
+ "csr5=0x%08x\n", csr5);
+ outl(newcsr6, ioaddr + CSR6); /* unsafe but do it anyway */
+ restore_flags(flags);
+ return;
+ }
+ outl(currcsr6, ioaddr + CSR6);
+ udelay(1);
+ }
+ /* now it is safe to change csr6 */
+ outl(newcsr6, ioaddr + CSR6);
+ restore_flags(flags);
+}
+
+
+static void __devinit read_mac_address(struct net_device *dev)
+{
+ long ioaddr = dev->base_addr;
+ int i, j;
+ unsigned char tuple, link, data_id, data_count;
+
+ /* Xircom has its address stored in the CIS;
+ * we access it through the boot rom interface for now
+ * this might not work, as the CIS is not parsed but I
+ * (danilo) use the offset I found on my card's CIS !!!
+ *
+ * Doug Ledford: I changed this routine around so that it
+ * walks the CIS memory space, parsing the config items, and
+ * finds the proper lan_node_id tuple and uses the data
+ * stored there.
+ */
+ outl(1 << 12, ioaddr + CSR9); /* enable boot rom access */
+ for (i = 0x100; i < 0x1f7; i += link+2) {
+ outl(i, ioaddr + CSR10);
+ tuple = inl(ioaddr + CSR9) & 0xff;
+ outl(i + 1, ioaddr + CSR10);
+ link = inl(ioaddr + CSR9) & 0xff;
+ outl(i + 2, ioaddr + CSR10);
+ data_id = inl(ioaddr + CSR9) & 0xff;
+ outl(i + 3, ioaddr + CSR10);
+ data_count = inl(ioaddr + CSR9) & 0xff;
+ if ( (tuple == 0x22) &&
+ (data_id == 0x04) && (data_count == 0x06) ) {
+ /*
+ * This is it. We have the data we want.
+ */
+ for (j = 0; j < 6; j++) {
+ outl(i + j + 4, ioaddr + CSR10);
+ dev->dev_addr[j] = inl(ioaddr + CSR9) & 0xff;
+ }
+ break;
+ } else if (link == 0) {
+ break;
+ }
+ }
+}
+
+
+/*
+ * locate the MII interfaces and initialize them.
+ * we disable full-duplex modes here,
+ * because we don't know how to handle them.
+ */
+static void find_mii_transceivers(struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ int phy, phy_idx;
+
+ if (media_cap[tp->default_port] & MediaIsMII) {
+ u16 media2advert[] = { 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200 };
+ tp->to_advertise = media2advert[tp->default_port - 9];
+ } else
+ tp->to_advertise =
+ /*ADVERTISE_100BASE4 | ADVERTISE_100FULL |*/ ADVERTISE_100HALF |
+ /*ADVERTISE_10FULL |*/ ADVERTISE_10HALF | ADVERTISE_CSMA;
+
+ /* Find the connected MII xcvrs.
+ Doing this in open() would allow detecting external xcvrs later,
+ but takes much time. */
+ for (phy = 0, phy_idx = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
+ int mii_status = mdio_read(dev, phy, MII_BMSR);
+ if ((mii_status & (BMSR_100BASE4 | BMSR_100HALF | BMSR_10HALF)) == BMSR_100BASE4 ||
+ ((mii_status & BMSR_100BASE4) == 0 &&
+ (mii_status & (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL | BMSR_10HALF)) != 0)) {
+ int mii_reg0 = mdio_read(dev, phy, MII_BMCR);
+ int mii_advert = mdio_read(dev, phy, MII_ADVERTISE);
+ int reg4 = ((mii_status >> 6) & tp->to_advertise) | ADVERTISE_CSMA;
+ tp->phys[phy_idx] = phy;
+ tp->advertising[phy_idx++] = reg4;
+ printk(KERN_INFO "%s: MII transceiver #%d "
+ "config %4.4x status %4.4x advertising %4.4x.\n",
+ dev->name, phy, mii_reg0, mii_status, mii_advert);
+ }
+ }
+ tp->mii_cnt = phy_idx;
+ if (phy_idx == 0) {
+ printk(KERN_INFO "%s: ***WARNING***: No MII transceiver found!\n",
+ dev->name);
+ tp->phys[0] = 0;
+ }
+}
+
+
+/*
+ * To quote Arjan van de Ven:
+ * transceiver_voodoo() enables the external UTP plug thingy.
+ * it's called voodoo as I stole this code and cannot cross-reference
+ * it with the specification.
+ * Actually it seems to go like this:
+ * - GPIO2 enables the MII itself so we can talk to it. The MII gets reset
+ * so any prior MII settings are lost.
+ * - GPIO0 enables the TP port so the MII can talk to the network.
+ * - a software reset will reset both GPIO pins.
+ * I also moved the software reset here, because doing it in xircom_up()
+ * required enabling the GPIO pins each time, which reset the MII each time.
+ * Thus we couldn't control the MII -- which sucks because we don't know
+ * how to handle full-duplex modes so we *must* disable them.
+ */
+static void transceiver_voodoo(struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ long ioaddr = dev->base_addr;
+
+ /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
+ outl(SoftwareReset, ioaddr + CSR0);
+ udelay(2);
+
+ /* Deassert reset. */
+ outl(tp->csr0, ioaddr + CSR0);
+
+ /* Reset the xcvr interface and turn on heartbeat. */
+ outl(0x0008, ioaddr + CSR15);
+ udelay(5); /* The delays are Xircom-recommended to give the
+ * chipset time to reset the actual hardware
+ * on the PCMCIA card
+ */
+ outl(0xa8050000, ioaddr + CSR15);
+ udelay(5);
+ outl(0xa00f0000, ioaddr + CSR15);
+ udelay(5);
+
+ outl_CSR6(0, ioaddr);
+ //outl_CSR6(FullDuplexBit, ioaddr);
+}
+
+
+static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct net_device *dev;
+ struct xircom_private *tp;
+ static int board_idx = -1;
+ int chip_idx = id->driver_data;
+ long ioaddr;
+ int i;
+ u8 chip_rev;
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+ static int printed_version;
+ if (!printed_version++)
+ printk(version);
+#endif
+
+ //printk(KERN_INFO "xircom_init_one(%s)\n", pci_name(pdev));
+
+ board_idx++;
+
+ if (pci_enable_device(pdev))
+ return -ENODEV;
+
+ pci_set_master(pdev);
+
+ ioaddr = pci_resource_start(pdev, 0);
+ dev = alloc_etherdev(sizeof(*tp));
+ if (!dev) {
+ printk (KERN_ERR DRV_NAME "%d: cannot alloc etherdev, aborting\n", board_idx);
+ return -ENOMEM;
+ }
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ dev->base_addr = ioaddr;
+ dev->irq = pdev->irq;
+
+ if (pci_request_regions(pdev, dev->name)) {
+ printk (KERN_ERR DRV_NAME " %d: cannot reserve PCI resources, aborting\n", board_idx);
+ goto err_out_free_netdev;
+ }
+
+ /* Bring the chip out of sleep mode.
+ Caution: Snooze mode does not work with some boards! */
+ if (xircom_tbl[chip_idx].flags & HAS_ACPI)
+ pci_write_config_dword(pdev, PCI_POWERMGMT, 0);
+
+ /* Stop the chip's Tx and Rx processes. */
+ outl_CSR6(inl(ioaddr + CSR6) & ~EnableTxRx, ioaddr);
+ /* Clear the missed-packet counter. */
+ (volatile int)inl(ioaddr + CSR8);
+
+ tp = netdev_priv(dev);
+
+ spin_lock_init(&tp->lock);
+ tp->pdev = pdev;
+ tp->chip_id = chip_idx;
+ /* BugFixes: The 21143-TD hangs with PCI Write-and-Invalidate cycles. */
+ /* XXX: is this necessary for Xircom? */
+ tp->csr0 = csr0 & ~EnableMWI;
+
+ pci_set_drvdata(pdev, dev);
+
+ /* The lower four bits are the media type. */
+ if (board_idx >= 0 && board_idx < MAX_UNITS) {
+ tp->default_port = options[board_idx] & 15;
+ if ((options[board_idx] & 0x90) || full_duplex[board_idx] > 0)
+ tp->full_duplex = 1;
+ if (mtu[board_idx] > 0)
+ dev->mtu = mtu[board_idx];
+ }
+ if (dev->mem_start)
+ tp->default_port = dev->mem_start;
+ if (tp->default_port) {
+ if (media_cap[tp->default_port] & MediaAlwaysFD)
+ tp->full_duplex = 1;
+ }
+ if (tp->full_duplex)
+ tp->autoneg = 0;
+ else
+ tp->autoneg = 1;
+ tp->speed100 = 1;
+
+ /* The Xircom-specific entries in the device structure. */
+ dev->open = &xircom_open;
+ dev->hard_start_xmit = &xircom_start_xmit;
+ dev->stop = &xircom_close;
+ dev->get_stats = &xircom_get_stats;
+ dev->do_ioctl = &xircom_ioctl;
+#ifdef HAVE_MULTICAST
+ dev->set_multicast_list = &set_rx_mode;
+#endif
+ dev->tx_timeout = xircom_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ SET_ETHTOOL_OPS(dev, &ops);
+
+ transceiver_voodoo(dev);
+
+ read_mac_address(dev);
+
+ if (register_netdev(dev))
+ goto err_out_cleardev;
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
+ printk(KERN_INFO "%s: %s rev %d at %#3lx,",
+ dev->name, xircom_tbl[chip_idx].chip_name, chip_rev, ioaddr);
+ for (i = 0; i < 6; i++)
+ printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]);
+ printk(", IRQ %d.\n", dev->irq);
+
+ if (xircom_tbl[chip_idx].flags & HAS_MII) {
+ find_mii_transceivers(dev);
+ check_duplex(dev);
+ }
+
+ return 0;
+
+err_out_cleardev:
+ pci_set_drvdata(pdev, NULL);
+ pci_release_regions(pdev);
+err_out_free_netdev:
+ free_netdev(dev);
+ return -ENODEV;
+}
+
+
+/* MII transceiver control section.
+ Read and write the MII registers using software-generated serial
+ MDIO protocol. See the MII specifications or DP83840A data sheet
+ for details. */
+
+/* The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
+ met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+ "overclocking" issues or future 66Mhz PCI. */
+#define mdio_delay() inl(mdio_addr)
+
+/* Read and write the MII registers using software-generated serial
+ MDIO protocol. It is just different enough from the EEPROM protocol
+ to not share code. The maxium data clock rate is 2.5 Mhz. */
+#define MDIO_SHIFT_CLK 0x10000
+#define MDIO_DATA_WRITE0 0x00000
+#define MDIO_DATA_WRITE1 0x20000
+#define MDIO_ENB 0x00000 /* Ignore the 0x02000 databook setting. */
+#define MDIO_ENB_IN 0x40000
+#define MDIO_DATA_READ 0x80000
+
+static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
+ int i;
+ int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+ int retval = 0;
+ long ioaddr = dev->base_addr;
+ long mdio_addr = ioaddr + CSR9;
+
+ /* Establish sync by sending at least 32 logic ones. */
+ for (i = 32; i >= 0; i--) {
+ outl(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
+ mdio_delay();
+ outl(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
+ mdio_delay();
+ }
+ /* Shift the read command bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (read_cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0;
+
+ outl(MDIO_ENB | dataval, mdio_addr);
+ mdio_delay();
+ outl(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr);
+ mdio_delay();
+ }
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ outl(MDIO_ENB_IN, mdio_addr);
+ mdio_delay();
+ retval = (retval << 1) | ((inl(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
+ outl(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+ mdio_delay();
+ }
+ return (retval>>1) & 0xffff;
+}
+
+
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
+{
+ int i;
+ int cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+ long ioaddr = dev->base_addr;
+ long mdio_addr = ioaddr + CSR9;
+
+ /* Establish sync by sending 32 logic ones. */
+ for (i = 32; i >= 0; i--) {
+ outl(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
+ mdio_delay();
+ outl(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
+ mdio_delay();
+ }
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval = (cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0;
+ outl(MDIO_ENB | dataval, mdio_addr);
+ mdio_delay();
+ outl(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr);
+ mdio_delay();
+ }
+ /* Clear out extra bits. */
+ for (i = 2; i > 0; i--) {
+ outl(MDIO_ENB_IN, mdio_addr);
+ mdio_delay();
+ outl(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+ mdio_delay();
+ }
+ return;
+}
+
+
+static void
+xircom_up(struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ long ioaddr = dev->base_addr;
+ int i;
+
+ xircom_init_ring(dev);
+ /* Clear the tx ring */
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ tp->tx_skbuff[i] = NULL;
+ tp->tx_ring[i].status = 0;
+ }
+
+ if (xircom_debug > 1)
+ printk(KERN_DEBUG "%s: xircom_up() irq %d.\n", dev->name, dev->irq);
+
+ outl(virt_to_bus(tp->rx_ring), ioaddr + CSR3);
+ outl(virt_to_bus(tp->tx_ring), ioaddr + CSR4);
+
+ tp->saved_if_port = dev->if_port;
+ if (dev->if_port == 0)
+ dev->if_port = tp->default_port;
+
+ tp->csr6 = TxThresh10 /*| FullDuplexBit*/; /* XXX: why 10 and not 100? */
+
+ set_rx_mode(dev);
+
+ /* Start the chip's Tx to process setup frame. */
+ outl_CSR6(tp->csr6, ioaddr);
+ outl_CSR6(tp->csr6 | EnableTx, ioaddr);
+
+ /* Acknowledge all outstanding interrupts sources */
+ outl(xircom_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5);
+ /* Enable interrupts by setting the interrupt mask. */
+ outl(xircom_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
+ /* Enable Rx */
+ outl_CSR6(tp->csr6 | EnableTxRx, ioaddr);
+ /* Rx poll demand */
+ outl(0, ioaddr + CSR2);
+
+ /* Tell the net layer we're ready */
+ netif_start_queue (dev);
+
+ /* Check current media state */
+ xircom_media_change(dev);
+
+ if (xircom_debug > 2) {
+ printk(KERN_DEBUG "%s: Done xircom_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n",
+ dev->name, inl(ioaddr + CSR0), inl(ioaddr + CSR5),
+ inl(ioaddr + CSR6));
+ }
+}
+
+
+static int
+xircom_open(struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+
+ if (request_irq(dev->irq, &xircom_interrupt, SA_SHIRQ, dev->name, dev))
+ return -EAGAIN;
+
+ xircom_up(dev);
+ tp->open = 1;
+
+ return 0;
+}
+
+
+static void xircom_tx_timeout(struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ long ioaddr = dev->base_addr;
+
+ if (media_cap[dev->if_port] & MediaIsMII) {
+ /* Do nothing -- the media monitor should handle this. */
+ if (xircom_debug > 1)
+ printk(KERN_WARNING "%s: Transmit timeout using MII device.\n",
+ dev->name);
+ }
+
+#if defined(way_too_many_messages)
+ if (xircom_debug > 3) {
+ int i;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ u8 *buf = (u8 *)(tp->rx_ring[i].buffer1);
+ int j;
+ printk(KERN_DEBUG "%2d: %8.8x %8.8x %8.8x %8.8x "
+ "%2.2x %2.2x %2.2x.\n",
+ i, (unsigned int)tp->rx_ring[i].status,
+ (unsigned int)tp->rx_ring[i].length,
+ (unsigned int)tp->rx_ring[i].buffer1,
+ (unsigned int)tp->rx_ring[i].buffer2,
+ buf[0], buf[1], buf[2]);
+ for (j = 0; buf[j] != 0xee && j < 1600; j++)
+ if (j < 100) printk(" %2.2x", buf[j]);
+ printk(" j=%d.\n", j);
+ }
+ printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring);
+ for (i = 0; i < RX_RING_SIZE; i++)
+ printk(" %8.8x", (unsigned int)tp->rx_ring[i].status);
+ printk("\n" KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring);
+ for (i = 0; i < TX_RING_SIZE; i++)
+ printk(" %8.8x", (unsigned int)tp->tx_ring[i].status);
+ printk("\n");
+ }
+#endif
+
+ /* Stop and restart the chip's Tx/Rx processes . */
+ outl_CSR6(tp->csr6 | EnableRx, ioaddr);
+ outl_CSR6(tp->csr6 | EnableTxRx, ioaddr);
+ /* Trigger an immediate transmit demand. */
+ outl(0, ioaddr + CSR1);
+
+ dev->trans_start = jiffies;
+ netif_wake_queue (dev);
+ tp->stats.tx_errors++;
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void xircom_init_ring(struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ int i;
+
+ tp->tx_full = 0;
+ tp->cur_rx = tp->cur_tx = 0;
+ tp->dirty_rx = tp->dirty_tx = 0;
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ tp->rx_ring[i].status = 0;
+ tp->rx_ring[i].length = PKT_BUF_SZ;
+ tp->rx_ring[i].buffer2 = virt_to_bus(&tp->rx_ring[i+1]);
+ tp->rx_skbuff[i] = NULL;
+ }
+ /* Mark the last entry as wrapping the ring. */
+ tp->rx_ring[i-1].length = PKT_BUF_SZ | Rx1RingWrap;
+ tp->rx_ring[i-1].buffer2 = virt_to_bus(&tp->rx_ring[0]);
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ /* Note the receive buffer must be longword aligned.
+ dev_alloc_skb() provides 16 byte alignment. But do *not*
+ use skb_reserve() to align the IP header! */
+ struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ);
+ tp->rx_skbuff[i] = skb;
+ if (skb == NULL)
+ break;
+ skb->dev = dev; /* Mark as being used by this device. */
+ tp->rx_ring[i].status = Rx0DescOwned; /* Owned by Xircom chip */
+ tp->rx_ring[i].buffer1 = virt_to_bus(skb->tail);
+ }
+ tp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+
+ /* The Tx buffer descriptor is filled in as needed, but we
+ do need to clear the ownership bit. */
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ tp->tx_skbuff[i] = NULL;
+ tp->tx_ring[i].status = 0;
+ tp->tx_ring[i].buffer2 = virt_to_bus(&tp->tx_ring[i+1]);
+#ifdef CARDBUS
+ if (tp->chip_id == X3201_3)
+ tp->tx_aligned_skbuff[i] = dev_alloc_skb(PKT_BUF_SZ);
+#endif /* CARDBUS */
+ }
+ tp->tx_ring[i-1].buffer2 = virt_to_bus(&tp->tx_ring[0]);
+}
+
+
+static int
+xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ int entry;
+ u32 flag;
+
+ /* Caution: the write order is important here, set the base address
+ with the "ownership" bits last. */
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = tp->cur_tx % TX_RING_SIZE;
+
+ tp->tx_skbuff[entry] = skb;
+#ifdef CARDBUS
+ if (tp->chip_id == X3201_3) {
+ memcpy(tp->tx_aligned_skbuff[entry]->data,skb->data,skb->len);
+ tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data);
+ } else
+#endif
+ tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data);
+
+ if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */
+ flag = Tx1WholePkt; /* No interrupt */
+ } else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) {
+ flag = Tx1WholePkt | Tx1ComplIntr; /* Tx-done intr. */
+ } else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) {
+ flag = Tx1WholePkt; /* No Tx-done intr. */
+ } else {
+ /* Leave room for set_rx_mode() to fill entries. */
+ flag = Tx1WholePkt | Tx1ComplIntr; /* Tx-done intr. */
+ tp->tx_full = 1;
+ }
+ if (entry == TX_RING_SIZE - 1)
+ flag |= Tx1WholePkt | Tx1ComplIntr | Tx1RingWrap;
+
+ tp->tx_ring[entry].length = skb->len | flag;
+ tp->tx_ring[entry].status = Tx0DescOwned; /* Pass ownership to the chip. */
+ tp->cur_tx++;
+ if (tp->tx_full)
+ netif_stop_queue (dev);
+ else
+ netif_wake_queue (dev);
+
+ /* Trigger an immediate transmit demand. */
+ outl(0, dev->base_addr + CSR1);
+
+ dev->trans_start = jiffies;
+
+ return 0;
+}
+
+
+static void xircom_media_change(struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ long ioaddr = dev->base_addr;
+ u16 reg0, reg1, reg4, reg5;
+ u32 csr6 = inl(ioaddr + CSR6), newcsr6;
+
+ /* reset status first */
+ mdio_read(dev, tp->phys[0], MII_BMCR);
+ mdio_read(dev, tp->phys[0], MII_BMSR);
+
+ reg0 = mdio_read(dev, tp->phys[0], MII_BMCR);
+ reg1 = mdio_read(dev, tp->phys[0], MII_BMSR);
+
+ if (reg1 & BMSR_LSTATUS) {
+ /* link is up */
+ if (reg0 & BMCR_ANENABLE) {
+ /* autonegotiation is enabled */
+ reg4 = mdio_read(dev, tp->phys[0], MII_ADVERTISE);
+ reg5 = mdio_read(dev, tp->phys[0], MII_LPA);
+ if (reg4 & ADVERTISE_100FULL && reg5 & LPA_100FULL) {
+ tp->speed100 = 1;
+ tp->full_duplex = 1;
+ } else if (reg4 & ADVERTISE_100HALF && reg5 & LPA_100HALF) {
+ tp->speed100 = 1;
+ tp->full_duplex = 0;
+ } else if (reg4 & ADVERTISE_10FULL && reg5 & LPA_10FULL) {
+ tp->speed100 = 0;
+ tp->full_duplex = 1;
+ } else {
+ tp->speed100 = 0;
+ tp->full_duplex = 0;
+ }
+ } else {
+ /* autonegotiation is disabled */
+ if (reg0 & BMCR_SPEED100)
+ tp->speed100 = 1;
+ else
+ tp->speed100 = 0;
+ if (reg0 & BMCR_FULLDPLX)
+ tp->full_duplex = 1;
+ else
+ tp->full_duplex = 0;
+ }
+ printk(KERN_DEBUG "%s: Link is up, running at %sMbit %s-duplex\n",
+ dev->name,
+ tp->speed100 ? "100" : "10",
+ tp->full_duplex ? "full" : "half");
+ netif_carrier_on(dev);
+ newcsr6 = csr6 & ~FullDuplexBit;
+ if (tp->full_duplex)
+ newcsr6 |= FullDuplexBit;
+ if (newcsr6 != csr6)
+ outl_CSR6(newcsr6, ioaddr + CSR6);
+ } else {
+ printk(KERN_DEBUG "%s: Link is down\n", dev->name);
+ netif_carrier_off(dev);
+ }
+}
+
+
+static void check_duplex(struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ u16 reg0;
+
+ mdio_write(dev, tp->phys[0], MII_BMCR, BMCR_RESET);
+ udelay(500);
+ while (mdio_read(dev, tp->phys[0], MII_BMCR) & BMCR_RESET);
+
+ reg0 = mdio_read(dev, tp->phys[0], MII_BMCR);
+ mdio_write(dev, tp->phys[0], MII_ADVERTISE, tp->advertising[0]);
+
+ if (tp->autoneg) {
+ reg0 &= ~(BMCR_SPEED100 | BMCR_FULLDPLX);
+ reg0 |= BMCR_ANENABLE | BMCR_ANRESTART;
+ } else {
+ reg0 &= ~(BMCR_ANENABLE | BMCR_ANRESTART);
+ if (tp->speed100)
+ reg0 |= BMCR_SPEED100;
+ if (tp->full_duplex)
+ reg0 |= BMCR_FULLDPLX;
+ printk(KERN_DEBUG "%s: Link forced to %sMbit %s-duplex\n",
+ dev->name,
+ tp->speed100 ? "100" : "10",
+ tp->full_duplex ? "full" : "half");
+ }
+ mdio_write(dev, tp->phys[0], MII_BMCR, reg0);
+}
+
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t xircom_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_instance;
+ struct xircom_private *tp = netdev_priv(dev);
+ long ioaddr = dev->base_addr;
+ int csr5, work_budget = max_interrupt_work;
+ int handled = 0;
+
+ spin_lock (&tp->lock);
+
+ do {
+ csr5 = inl(ioaddr + CSR5);
+ /* Acknowledge all of the current interrupt sources ASAP. */
+ outl(csr5 & 0x0001ffff, ioaddr + CSR5);
+
+ if (xircom_debug > 4)
+ printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x.\n",
+ dev->name, csr5, inl(dev->base_addr + CSR5));
+
+ if (csr5 == 0xffffffff)
+ break; /* all bits set, assume PCMCIA card removed */
+
+ if ((csr5 & (NormalIntr|AbnormalIntr)) == 0)
+ break;
+
+ handled = 1;
+
+ if (csr5 & (RxIntr | RxNoBuf))
+ work_budget -= xircom_rx(dev);
+
+ if (csr5 & (TxNoBuf | TxDied | TxIntr)) {
+ unsigned int dirty_tx;
+
+ for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0;
+ dirty_tx++) {
+ int entry = dirty_tx % TX_RING_SIZE;
+ int status = tp->tx_ring[entry].status;
+
+ if (status < 0)
+ break; /* It still hasn't been Txed */
+ /* Check for Rx filter setup frames. */
+ if (tp->tx_skbuff[entry] == NULL)
+ continue;
+
+ if (status & Tx0DescError) {
+ /* There was an major error, log it. */
+#ifndef final_version
+ if (xircom_debug > 1)
+ printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
+ dev->name, status);
+#endif
+ tp->stats.tx_errors++;
+ if (status & Tx0ManyColl) {
+ tp->stats.tx_aborted_errors++;
+ }
+ if (status & Tx0NoCarrier) tp->stats.tx_carrier_errors++;
+ if (status & Tx0LateColl) tp->stats.tx_window_errors++;
+ if (status & Tx0Underflow) tp->stats.tx_fifo_errors++;
+ } else {
+ tp->stats.tx_bytes += tp->tx_ring[entry].length & 0x7ff;
+ tp->stats.collisions += (status >> 3) & 15;
+ tp->stats.tx_packets++;
+ }
+
+ /* Free the original skb. */
+ dev_kfree_skb_irq(tp->tx_skbuff[entry]);
+ tp->tx_skbuff[entry] = NULL;
+ }
+
+#ifndef final_version
+ if (tp->cur_tx - dirty_tx > TX_RING_SIZE) {
+ printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
+ dev->name, dirty_tx, tp->cur_tx, tp->tx_full);
+ dirty_tx += TX_RING_SIZE;
+ }
+#endif
+
+ if (tp->tx_full &&
+ tp->cur_tx - dirty_tx < TX_RING_SIZE - 2)
+ /* The ring is no longer full */
+ tp->tx_full = 0;
+
+ if (tp->tx_full)
+ netif_stop_queue (dev);
+ else
+ netif_wake_queue (dev);
+
+ tp->dirty_tx = dirty_tx;
+ if (csr5 & TxDied) {
+ if (xircom_debug > 2)
+ printk(KERN_WARNING "%s: The transmitter stopped."
+ " CSR5 is %x, CSR6 %x, new CSR6 %x.\n",
+ dev->name, csr5, inl(ioaddr + CSR6), tp->csr6);
+ outl_CSR6(tp->csr6 | EnableRx, ioaddr);
+ outl_CSR6(tp->csr6 | EnableTxRx, ioaddr);
+ }
+ }
+
+ /* Log errors. */
+ if (csr5 & AbnormalIntr) { /* Abnormal error summary bit. */
+ if (csr5 & LinkChange)
+ xircom_media_change(dev);
+ if (csr5 & TxFIFOUnderflow) {
+ if ((tp->csr6 & TxThreshMask) != TxThreshMask)
+ tp->csr6 += (1 << TxThreshShift); /* Bump up the Tx threshold */
+ else
+ tp->csr6 |= TxStoreForw; /* Store-n-forward. */
+ /* Restart the transmit process. */
+ outl_CSR6(tp->csr6 | EnableRx, ioaddr);
+ outl_CSR6(tp->csr6 | EnableTxRx, ioaddr);
+ }
+ if (csr5 & RxDied) { /* Missed a Rx frame. */
+ tp->stats.rx_errors++;
+ tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff;
+ outl_CSR6(tp->csr6 | EnableTxRx, ioaddr);
+ }
+ /* Clear all error sources, included undocumented ones! */
+ outl(0x0800f7ba, ioaddr + CSR5);
+ }
+ if (--work_budget < 0) {
+ if (xircom_debug > 1)
+ printk(KERN_WARNING "%s: Too much work during an interrupt, "
+ "csr5=0x%8.8x.\n", dev->name, csr5);
+ /* Acknowledge all interrupt sources. */
+ outl(0x8001ffff, ioaddr + CSR5);
+ break;
+ }
+ } while (1);
+
+ if (xircom_debug > 3)
+ printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#4.4x.\n",
+ dev->name, inl(ioaddr + CSR5));
+
+ spin_unlock (&tp->lock);
+ return IRQ_RETVAL(handled);
+}
+
+
+static int
+xircom_rx(struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ int entry = tp->cur_rx % RX_RING_SIZE;
+ int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx;
+ int work_done = 0;
+
+ if (xircom_debug > 4)
+ printk(KERN_DEBUG " In xircom_rx(), entry %d %8.8x.\n", entry,
+ tp->rx_ring[entry].status);
+ /* If we own the next entry, it's a new packet. Send it up. */
+ while (tp->rx_ring[entry].status >= 0) {
+ s32 status = tp->rx_ring[entry].status;
+
+ if (xircom_debug > 5)
+ printk(KERN_DEBUG " In xircom_rx(), entry %d %8.8x.\n", entry,
+ tp->rx_ring[entry].status);
+ if (--rx_work_limit < 0)
+ break;
+ if ((status & 0x38008300) != 0x0300) {
+ if ((status & 0x38000300) != 0x0300) {
+ /* Ignore earlier buffers. */
+ if ((status & 0xffff) != 0x7fff) {
+ if (xircom_debug > 1)
+ printk(KERN_WARNING "%s: Oversized Ethernet frame "
+ "spanned multiple buffers, status %8.8x!\n",
+ dev->name, status);
+ tp->stats.rx_length_errors++;
+ }
+ } else if (status & Rx0DescError) {
+ /* There was a fatal error. */
+ if (xircom_debug > 2)
+ printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
+ dev->name, status);
+ tp->stats.rx_errors++; /* end of a packet.*/
+ if (status & (Rx0Runt | Rx0HugeFrame)) tp->stats.rx_length_errors++;
+ if (status & Rx0CRCError) tp->stats.rx_crc_errors++;
+ }
+ } else {
+ /* Omit the four octet CRC from the length. */
+ short pkt_len = ((status >> 16) & 0x7ff) - 4;
+ struct sk_buff *skb;
+
+#ifndef final_version
+ if (pkt_len > 1518) {
+ printk(KERN_WARNING "%s: Bogus packet size of %d (%#x).\n",
+ dev->name, pkt_len, pkt_len);
+ pkt_len = 1518;
+ tp->stats.rx_length_errors++;
+ }
+#endif
+ /* Check if the packet is long enough to accept without copying
+ to a minimally-sized skbuff. */
+ if (pkt_len < rx_copybreak
+ && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* 16 byte align the IP header */
+#if ! defined(__alpha__)
+ eth_copy_and_sum(skb, bus_to_virt(tp->rx_ring[entry].buffer1),
+ pkt_len, 0);
+ skb_put(skb, pkt_len);
+#else
+ memcpy(skb_put(skb, pkt_len),
+ bus_to_virt(tp->rx_ring[entry].buffer1), pkt_len);
+#endif
+ work_done++;
+ } else { /* Pass up the skb already on the Rx ring. */
+ skb_put(skb = tp->rx_skbuff[entry], pkt_len);
+ tp->rx_skbuff[entry] = NULL;
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ tp->stats.rx_packets++;
+ tp->stats.rx_bytes += pkt_len;
+ }
+ entry = (++tp->cur_rx) % RX_RING_SIZE;
+ }
+
+ /* Refill the Rx ring buffers. */
+ for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) {
+ entry = tp->dirty_rx % RX_RING_SIZE;
+ if (tp->rx_skbuff[entry] == NULL) {
+ struct sk_buff *skb;
+ skb = tp->rx_skbuff[entry] = dev_alloc_skb(PKT_BUF_SZ);
+ if (skb == NULL)
+ break;
+ skb->dev = dev; /* Mark as being used by this device. */
+ tp->rx_ring[entry].buffer1 = virt_to_bus(skb->tail);
+ work_done++;
+ }
+ tp->rx_ring[entry].status = Rx0DescOwned;
+ }
+
+ return work_done;
+}
+
+
+static void
+xircom_down(struct net_device *dev)
+{
+ long ioaddr = dev->base_addr;
+ struct xircom_private *tp = netdev_priv(dev);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ outl(0, ioaddr + CSR7);
+ /* Stop the chip's Tx and Rx processes. */
+ outl_CSR6(inl(ioaddr + CSR6) & ~EnableTxRx, ioaddr);
+
+ if (inl(ioaddr + CSR6) != 0xffffffff)
+ tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff;
+
+ dev->if_port = tp->saved_if_port;
+}
+
+
+static int
+xircom_close(struct net_device *dev)
+{
+ long ioaddr = dev->base_addr;
+ struct xircom_private *tp = netdev_priv(dev);
+ int i;
+
+ if (xircom_debug > 1)
+ printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
+ dev->name, inl(ioaddr + CSR5));
+
+ netif_stop_queue(dev);
+
+ if (netif_device_present(dev))
+ xircom_down(dev);
+
+ free_irq(dev->irq, dev);
+
+ /* Free all the skbuffs in the Rx queue. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb = tp->rx_skbuff[i];
+ tp->rx_skbuff[i] = NULL;
+ tp->rx_ring[i].status = 0; /* Not owned by Xircom chip. */
+ tp->rx_ring[i].length = 0;
+ tp->rx_ring[i].buffer1 = 0xBADF00D0; /* An invalid address. */
+ if (skb) {
+ dev_kfree_skb(skb);
+ }
+ }
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ if (tp->tx_skbuff[i])
+ dev_kfree_skb(tp->tx_skbuff[i]);
+ tp->tx_skbuff[i] = NULL;
+ }
+
+ tp->open = 0;
+ return 0;
+}
+
+
+static struct net_device_stats *xircom_get_stats(struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ long ioaddr = dev->base_addr;
+
+ if (netif_device_present(dev))
+ tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff;
+
+ return &tp->stats;
+}
+
+static int xircom_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ ecmd->supported =
+ SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_MII;
+
+ ecmd->advertising = ADVERTISED_MII;
+ if (tp->advertising[0] & ADVERTISE_10HALF)
+ ecmd->advertising |= ADVERTISED_10baseT_Half;
+ if (tp->advertising[0] & ADVERTISE_10FULL)
+ ecmd->advertising |= ADVERTISED_10baseT_Full;
+ if (tp->advertising[0] & ADVERTISE_100HALF)
+ ecmd->advertising |= ADVERTISED_100baseT_Half;
+ if (tp->advertising[0] & ADVERTISE_100FULL)
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
+ if (tp->autoneg) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ ecmd->autoneg = AUTONEG_ENABLE;
+ } else
+ ecmd->autoneg = AUTONEG_DISABLE;
+
+ ecmd->port = PORT_MII;
+ ecmd->transceiver = XCVR_INTERNAL;
+ ecmd->phy_address = tp->phys[0];
+ ecmd->speed = tp->speed100 ? SPEED_100 : SPEED_10;
+ ecmd->duplex = tp->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+ ecmd->maxtxpkt = TX_RING_SIZE / 2;
+ ecmd->maxrxpkt = 0;
+ return 0;
+}
+
+static int xircom_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ u16 autoneg, speed100, full_duplex;
+
+ autoneg = (ecmd->autoneg == AUTONEG_ENABLE);
+ speed100 = (ecmd->speed == SPEED_100);
+ full_duplex = (ecmd->duplex == DUPLEX_FULL);
+
+ tp->autoneg = autoneg;
+ if (speed100 != tp->speed100 ||
+ full_duplex != tp->full_duplex) {
+ tp->speed100 = speed100;
+ tp->full_duplex = full_duplex;
+ /* change advertising bits */
+ tp->advertising[0] &= ~(ADVERTISE_10HALF |
+ ADVERTISE_10FULL |
+ ADVERTISE_100HALF |
+ ADVERTISE_100FULL |
+ ADVERTISE_100BASE4);
+ if (speed100) {
+ if (full_duplex)
+ tp->advertising[0] |= ADVERTISE_100FULL;
+ else
+ tp->advertising[0] |= ADVERTISE_100HALF;
+ } else {
+ if (full_duplex)
+ tp->advertising[0] |= ADVERTISE_10FULL;
+ else
+ tp->advertising[0] |= ADVERTISE_10HALF;
+ }
+ }
+ check_duplex(dev);
+ return 0;
+}
+
+static void xircom_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(tp->pdev));
+}
+
+static struct ethtool_ops ops = {
+ .get_settings = xircom_get_settings,
+ .set_settings = xircom_set_settings,
+ .get_drvinfo = xircom_get_drvinfo,
+};
+
+/* Provide ioctl() calls to examine the MII xcvr state. */
+static int xircom_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ u16 *data = (u16 *)&rq->ifr_ifru;
+ int phy = tp->phys[0] & 0x1f;
+ unsigned long flags;
+
+ switch(cmd) {
+ /* Legacy mii-diag interface */
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ if (tp->mii_cnt)
+ data[0] = phy;
+ else
+ return -ENODEV;
+ return 0;
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ save_flags(flags);
+ cli();
+ data[3] = mdio_read(dev, data[0] & 0x1f, data[1] & 0x1f);
+ restore_flags(flags);
+ return 0;
+ case SIOCSMIIREG: /* Write MII PHY register. */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ save_flags(flags);
+ cli();
+ if (data[0] == tp->phys[0]) {
+ u16 value = data[2];
+ switch (data[1]) {
+ case 0:
+ if (value & (BMCR_RESET | BMCR_ANENABLE))
+ /* Autonegotiation. */
+ tp->autoneg = 1;
+ else {
+ tp->full_duplex = (value & BMCR_FULLDPLX) ? 1 : 0;
+ tp->autoneg = 0;
+ }
+ break;
+ case 4:
+ tp->advertising[0] = value;
+ break;
+ }
+ check_duplex(dev);
+ }
+ mdio_write(dev, data[0] & 0x1f, data[1] & 0x1f, data[2]);
+ restore_flags(flags);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ Note that we only use exclusion around actually queueing the
+ new frame, not around filling tp->setup_frame. This is non-deterministic
+ when re-entered but still correct. */
+static void set_rx_mode(struct net_device *dev)
+{
+ struct xircom_private *tp = netdev_priv(dev);
+ struct dev_mc_list *mclist;
+ long ioaddr = dev->base_addr;
+ int csr6 = inl(ioaddr + CSR6);
+ u16 *eaddrs, *setup_frm;
+ u32 tx_flags;
+ int i;
+
+ tp->csr6 &= ~(AllMultiBit | PromiscBit | HashFilterBit);
+ csr6 &= ~(AllMultiBit | PromiscBit | HashFilterBit);
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ tp->csr6 |= PromiscBit;
+ csr6 |= PromiscBit;
+ goto out;
+ }
+
+ if ((dev->mc_count > 1000) || (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter well -- accept all multicasts. */
+ tp->csr6 |= AllMultiBit;
+ csr6 |= AllMultiBit;
+ goto out;
+ }
+
+ tx_flags = Tx1WholePkt | Tx1SetupPkt | PKT_SETUP_SZ;
+
+ /* Note that only the low-address shortword of setup_frame is valid! */
+ setup_frm = tp->setup_frame;
+ mclist = dev->mc_list;
+
+ /* Fill the first entry with our physical address. */
+ eaddrs = (u16 *)dev->dev_addr;
+ *setup_frm = cpu_to_le16(eaddrs[0]); setup_frm += 2;
+ *setup_frm = cpu_to_le16(eaddrs[1]); setup_frm += 2;
+ *setup_frm = cpu_to_le16(eaddrs[2]); setup_frm += 2;
+
+ if (dev->mc_count > 14) { /* Must use a multicast hash table. */
+ u32 *hash_table = (u32 *)(tp->setup_frame + 4 * 12);
+ u32 hash, hash2;
+
+ tx_flags |= Tx1HashSetup;
+ tp->csr6 |= HashFilterBit;
+ csr6 |= HashFilterBit;
+
+ /* Fill the unused 3 entries with the broadcast address.
+ At least one entry *must* contain the broadcast address!!!*/
+ for (i = 0; i < 3; i++) {
+ *setup_frm = 0xffff; setup_frm += 2;
+ *setup_frm = 0xffff; setup_frm += 2;
+ *setup_frm = 0xffff; setup_frm += 2;
+ }
+
+ /* Truly brain-damaged hash filter layout */
+ /* XXX: not sure if I should take the last or the first 9 bits */
+ for (i = 0; i < dev->mc_count; i++, mclist = mclist->next) {
+ u32 *hptr;
+ hash = ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x1ff;
+ if (hash < 384) {
+ hash2 = hash + ((hash >> 4) << 4) +
+ ((hash >> 5) << 5);
+ } else {
+ hash -= 384;
+ hash2 = 64 + hash + (hash >> 4) * 80;
+ }
+ hptr = &hash_table[hash2 & ~0x1f];
+ *hptr |= cpu_to_le32(1 << (hash2 & 0x1f));
+ }
+ } else {
+ /* We have <= 14 mcast addresses so we can use Xircom's
+ wonderful 16-address perfect filter. */
+ for (i = 0; i < dev->mc_count; i++, mclist = mclist->next) {
+ eaddrs = (u16 *)mclist->dmi_addr;
+ *setup_frm = cpu_to_le16(eaddrs[0]); setup_frm += 2;
+ *setup_frm = cpu_to_le16(eaddrs[1]); setup_frm += 2;
+ *setup_frm = cpu_to_le16(eaddrs[2]); setup_frm += 2;
+ }
+ /* Fill the unused entries with the broadcast address.
+ At least one entry *must* contain the broadcast address!!!*/
+ for (; i < 15; i++) {
+ *setup_frm = 0xffff; setup_frm += 2;
+ *setup_frm = 0xffff; setup_frm += 2;
+ *setup_frm = 0xffff; setup_frm += 2;
+ }
+ }
+
+ /* Now add this frame to the Tx list. */
+ if (tp->cur_tx - tp->dirty_tx > TX_RING_SIZE - 2) {
+ /* Same setup recently queued, we need not add it. */
+ /* XXX: Huh? All it means is that the Tx list is full...*/
+ } else {
+ unsigned long flags;
+ unsigned int entry;
+ int dummy = -1;
+
+ save_flags(flags); cli();
+ entry = tp->cur_tx++ % TX_RING_SIZE;
+
+ if (entry != 0) {
+ /* Avoid a chip errata by prefixing a dummy entry. */
+ tp->tx_skbuff[entry] = NULL;
+ tp->tx_ring[entry].length =
+ (entry == TX_RING_SIZE - 1) ? Tx1RingWrap : 0;
+ tp->tx_ring[entry].buffer1 = 0;
+ /* race with chip, set Tx0DescOwned later */
+ dummy = entry;
+ entry = tp->cur_tx++ % TX_RING_SIZE;
+ }
+
+ tp->tx_skbuff[entry] = NULL;
+ /* Put the setup frame on the Tx list. */
+ if (entry == TX_RING_SIZE - 1)
+ tx_flags |= Tx1RingWrap; /* Wrap ring. */
+ tp->tx_ring[entry].length = tx_flags;
+ tp->tx_ring[entry].buffer1 = virt_to_bus(tp->setup_frame);
+ tp->tx_ring[entry].status = Tx0DescOwned;
+ if (tp->cur_tx - tp->dirty_tx >= TX_RING_SIZE - 2) {
+ tp->tx_full = 1;
+ netif_stop_queue (dev);
+ }
+ if (dummy >= 0)
+ tp->tx_ring[dummy].status = Tx0DescOwned;
+ restore_flags(flags);
+ /* Trigger an immediate transmit demand. */
+ outl(0, ioaddr + CSR1);
+ }
+
+out:
+ outl_CSR6(csr6, ioaddr);
+}
+
+
+static struct pci_device_id xircom_pci_table[] = {
+ { 0x115D, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, X3201_3 },
+ {0},
+};
+MODULE_DEVICE_TABLE(pci, xircom_pci_table);
+
+
+#ifdef CONFIG_PM
+static int xircom_suspend(struct pci_dev *pdev, u32 state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct xircom_private *tp = netdev_priv(dev);
+ printk(KERN_INFO "xircom_suspend(%s)\n", dev->name);
+ if (tp->open)
+ xircom_down(dev);
+
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, 3);
+
+ return 0;
+}
+
+
+static int xircom_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct xircom_private *tp = netdev_priv(dev);
+ printk(KERN_INFO "xircom_resume(%s)\n", dev->name);
+
+ pci_set_power_state(pdev,0);
+ pci_enable_device(pdev);
+ pci_restore_state(pdev);
+
+ /* Bring the chip out of sleep mode.
+ Caution: Snooze mode does not work with some boards! */
+ if (xircom_tbl[tp->chip_id].flags & HAS_ACPI)
+ pci_write_config_dword(tp->pdev, PCI_POWERMGMT, 0);
+
+ transceiver_voodoo(dev);
+ if (xircom_tbl[tp->chip_id].flags & HAS_MII)
+ check_duplex(dev);
+
+ if (tp->open)
+ xircom_up(dev);
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+
+static void __devexit xircom_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ printk(KERN_INFO "xircom_remove_one(%s)\n", dev->name);
+ unregister_netdev(dev);
+ pci_release_regions(pdev);
+ free_netdev(dev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+
+static struct pci_driver xircom_driver = {
+ .name = DRV_NAME,
+ .id_table = xircom_pci_table,
+ .probe = xircom_init_one,
+ .remove = __devexit_p(xircom_remove_one),
+#ifdef CONFIG_PM
+ .suspend = xircom_suspend,
+ .resume = xircom_resume
+#endif /* CONFIG_PM */
+};
+
+
+static int __init xircom_init(void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+ printk(version);
+#endif
+ return pci_module_init(&xircom_driver);
+}
+
+
+static void __exit xircom_exit(void)
+{
+ pci_unregister_driver(&xircom_driver);
+}
+
+module_init(xircom_init)
+module_exit(xircom_exit)
+
+/*
+ * Local variables:
+ * c-indent-level: 4
+ * c-basic-offset: 4
+ * tab-width: 4
+ * End:
+ */