aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wan/sdla_ft1.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wan/sdla_ft1.c')
-rw-r--r--drivers/net/wan/sdla_ft1.c344
1 files changed, 344 insertions, 0 deletions
diff --git a/drivers/net/wan/sdla_ft1.c b/drivers/net/wan/sdla_ft1.c
new file mode 100644
index 00000000000..5e3124856eb
--- /dev/null
+++ b/drivers/net/wan/sdla_ft1.c
@@ -0,0 +1,344 @@
+/*****************************************************************************
+* sdla_chdlc.c WANPIPE(tm) Multiprotocol WAN Link Driver. Cisco HDLC module.
+*
+* Authors: Nenad Corbic <ncorbic@sangoma.com>
+* Gideon Hack
+*
+* Copyright: (c) 1995-1999 Sangoma Technologies Inc.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version
+* 2 of the License, or (at your option) any later version.
+* ============================================================================
+* Sep 30, 1999 Nenad Corbic Fixed dynamic IP and route setup.
+* Sep 23, 1999 Nenad Corbic Added SMP support, fixed tracing
+* Sep 13, 1999 Nenad Corbic Split up Port 0 and 1 into separate devices.
+* Jun 02, 1999 Gideon Hack Added support for the S514 adapter.
+* Oct 30, 1998 Jaspreet Singh Added Support for CHDLC API (HDLC STREAMING).
+* Oct 28, 1998 Jaspreet Singh Added Support for Dual Port CHDLC.
+* Aug 07, 1998 David Fong Initial version.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h> /* printk(), and other useful stuff */
+#include <linux/stddef.h> /* offsetof(), etc. */
+#include <linux/errno.h> /* return codes */
+#include <linux/string.h> /* inline memset(), etc. */
+#include <linux/slab.h> /* kmalloc(), kfree() */
+#include <linux/wanrouter.h> /* WAN router definitions */
+#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
+#include <linux/if_arp.h> /* ARPHRD_* defines */
+
+#include <linux/inetdevice.h>
+#include <asm/uaccess.h>
+
+#include <linux/in.h> /* sockaddr_in */
+#include <linux/inet.h>
+#include <linux/if.h>
+#include <asm/byteorder.h> /* htons(), etc. */
+#include <linux/sdlapci.h>
+#include <asm/io.h>
+
+#include <linux/sdla_chdlc.h> /* CHDLC firmware API definitions */
+
+/****** Defines & Macros ****************************************************/
+
+/* reasons for enabling the timer interrupt on the adapter */
+#define TMR_INT_ENABLED_UDP 0x0001
+#define TMR_INT_ENABLED_UPDATE 0x0002
+
+#define CHDLC_DFLT_DATA_LEN 1500 /* default MTU */
+#define CHDLC_HDR_LEN 1
+
+#define IFF_POINTTOPOINT 0x10
+
+#define WANPIPE 0x00
+#define API 0x01
+#define CHDLC_API 0x01
+
+#define PORT(x) (x == 0 ? "PRIMARY" : "SECONDARY" )
+
+
+/******Data Structures*****************************************************/
+
+/* This structure is placed in the private data area of the device structure.
+ * The card structure used to occupy the private area but now the following
+ * structure will incorporate the card structure along with CHDLC specific data
+ */
+
+typedef struct chdlc_private_area
+{
+ struct net_device *slave;
+ sdla_t *card;
+ int TracingEnabled; /* For enabling Tracing */
+ unsigned long curr_trace_addr; /* Used for Tracing */
+ unsigned long start_trace_addr;
+ unsigned long end_trace_addr;
+ unsigned long base_addr_trace_buffer;
+ unsigned long end_addr_trace_buffer;
+ unsigned short number_trace_elements;
+ unsigned available_buffer_space;
+ unsigned long router_start_time;
+ unsigned char route_status;
+ unsigned char route_removed;
+ unsigned long tick_counter; /* For 5s timeout counter */
+ unsigned long router_up_time;
+ u32 IP_address; /* IP addressing */
+ u32 IP_netmask;
+ unsigned char mc; /* Mulitcast support on/off */
+ unsigned short udp_pkt_lgth; /* udp packet processing */
+ char udp_pkt_src;
+ char udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT];
+ unsigned short timer_int_enabled;
+ char update_comms_stats; /* updating comms stats */
+ //FIXME: add driver stats as per frame relay!
+
+} chdlc_private_area_t;
+
+/* Route Status options */
+#define NO_ROUTE 0x00
+#define ADD_ROUTE 0x01
+#define ROUTE_ADDED 0x02
+#define REMOVE_ROUTE 0x03
+
+
+/****** Function Prototypes *************************************************/
+/* WAN link driver entry points. These are called by the WAN router module. */
+static int wpft1_exec (struct sdla *card, void *u_cmd, void *u_data);
+static int chdlc_read_version (sdla_t* card, char* str);
+static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb);
+
+/****** Public Functions ****************************************************/
+
+/*============================================================================
+ * Cisco HDLC protocol initialization routine.
+ *
+ * This routine is called by the main WANPIPE module during setup. At this
+ * point adapter is completely initialized and firmware is running.
+ * o read firmware version (to make sure it's alive)
+ * o configure adapter
+ * o initialize protocol-specific fields of the adapter data space.
+ *
+ * Return: 0 o.k.
+ * < 0 failure.
+ */
+int wpft1_init (sdla_t* card, wandev_conf_t* conf)
+{
+ unsigned char port_num;
+ int err;
+
+ union
+ {
+ char str[80];
+ } u;
+ volatile CHDLC_MAILBOX_STRUCT* mb;
+ CHDLC_MAILBOX_STRUCT* mb1;
+ unsigned long timeout;
+
+ /* Verify configuration ID */
+ if (conf->config_id != WANCONFIG_CHDLC) {
+ printk(KERN_INFO "%s: invalid configuration ID %u!\n",
+ card->devname, conf->config_id);
+ return -EINVAL;
+ }
+
+ /* Use primary port */
+ card->u.c.comm_port = 0;
+
+
+ /* Initialize protocol-specific fields */
+ if(card->hw.type != SDLA_S514){
+ card->mbox = (void *) card->hw.dpmbase;
+ }else{
+ card->mbox = (void *) card->hw.dpmbase + PRI_BASE_ADDR_MB_STRUCT;
+ }
+
+ mb = mb1 = card->mbox;
+
+ if (!card->configured){
+
+ /* The board will place an 'I' in the return code to indicate that it is
+ ready to accept commands. We expect this to be completed in less
+ than 1 second. */
+
+ timeout = jiffies;
+ while (mb->return_code != 'I') /* Wait 1s for board to initialize */
+ if ((jiffies - timeout) > 1*HZ) break;
+
+ if (mb->return_code != 'I') {
+ printk(KERN_INFO
+ "%s: Initialization not completed by adapter\n",
+ card->devname);
+ printk(KERN_INFO "Please contact Sangoma representative.\n");
+ return -EIO;
+ }
+ }
+
+ /* Read firmware version. Note that when adapter initializes, it
+ * clears the mailbox, so it may appear that the first command was
+ * executed successfully when in fact it was merely erased. To work
+ * around this, we execute the first command twice.
+ */
+
+ if (chdlc_read_version(card, u.str))
+ return -EIO;
+
+ printk(KERN_INFO "%s: Running FT1 Configuration firmware v%s\n",
+ card->devname, u.str);
+
+ card->isr = NULL;
+ card->poll = NULL;
+ card->exec = &wpft1_exec;
+ card->wandev.update = NULL;
+ card->wandev.new_if = NULL;
+ card->wandev.del_if = NULL;
+ card->wandev.state = WAN_DUALPORT;
+ card->wandev.udp_port = conf->udp_port;
+
+ card->wandev.new_if_cnt = 0;
+
+ /* This is for the ports link state */
+ card->u.c.state = WAN_DISCONNECTED;
+
+ /* reset the number of times the 'update()' proc has been called */
+ card->u.c.update_call_count = 0;
+
+ card->wandev.ttl = 0x7F;
+ card->wandev.interface = 0;
+
+ card->wandev.clocking = 0;
+
+ port_num = card->u.c.comm_port;
+
+ /* Setup Port Bps */
+
+ card->wandev.bps = 0;
+
+ card->wandev.mtu = MIN_LGTH_CHDLC_DATA_CFG;
+
+ /* Set up the interrupt status area */
+ /* Read the CHDLC Configuration and obtain:
+ * Ptr to shared memory infor struct
+ * Use this pointer to calculate the value of card->u.c.flags !
+ */
+ mb1->buffer_length = 0;
+ mb1->command = READ_CHDLC_CONFIGURATION;
+ err = sdla_exec(mb1) ? mb1->return_code : CMD_TIMEOUT;
+ if(err != COMMAND_OK) {
+ chdlc_error(card, err, mb1);
+ return -EIO;
+ }
+
+ if(card->hw.type == SDLA_S514){
+ card->u.c.flags = (void *)(card->hw.dpmbase +
+ (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
+ ptr_shared_mem_info_struct));
+ }else{
+ card->u.c.flags = (void *)(card->hw.dpmbase +
+ (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
+ ptr_shared_mem_info_struct % SDLA_WINDOWSIZE));
+ }
+
+ card->wandev.state = WAN_FT1_READY;
+ printk(KERN_INFO "%s: FT1 Config Ready !\n",card->devname);
+
+ return 0;
+}
+
+static int wpft1_exec(sdla_t *card, void *u_cmd, void *u_data)
+{
+ CHDLC_MAILBOX_STRUCT* mbox = card->mbox;
+ int len;
+
+ if (copy_from_user((void*)&mbox->command, u_cmd, sizeof(ft1_exec_cmd_t))){
+ return -EFAULT;
+ }
+
+ len = mbox->buffer_length;
+
+ if (len) {
+ if( copy_from_user((void*)&mbox->data, u_data, len)){
+ return -EFAULT;
+ }
+ }
+
+ /* execute command */
+ if (!sdla_exec(mbox)){
+ return -EIO;
+ }
+
+ /* return result */
+ if( copy_to_user(u_cmd, (void*)&mbox->command, sizeof(ft1_exec_cmd_t))){
+ return -EFAULT;
+ }
+
+ len = mbox->buffer_length;
+
+ if (len && u_data && copy_to_user(u_data, (void*)&mbox->data, len)){
+ return -EFAULT;
+ }
+
+ return 0;
+
+}
+
+/*============================================================================
+ * Read firmware code version.
+ * Put code version as ASCII string in str.
+ */
+static int chdlc_read_version (sdla_t* card, char* str)
+{
+ CHDLC_MAILBOX_STRUCT* mb = card->mbox;
+ int len;
+ char err;
+ mb->buffer_length = 0;
+ mb->command = READ_CHDLC_CODE_VERSION;
+ err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
+
+ if(err != COMMAND_OK) {
+ chdlc_error(card,err,mb);
+ }
+ else if (str) { /* is not null */
+ len = mb->buffer_length;
+ memcpy(str, mb->data, len);
+ str[len] = '\0';
+ }
+ return (err);
+}
+
+/*============================================================================
+ * Firmware error handler.
+ * This routine is called whenever firmware command returns non-zero
+ * return code.
+ *
+ * Return zero if previous command has to be cancelled.
+ */
+static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb)
+{
+ unsigned cmd = mb->command;
+
+ switch (err) {
+
+ case CMD_TIMEOUT:
+ printk(KERN_ERR "%s: command 0x%02X timed out!\n",
+ card->devname, cmd);
+ break;
+
+ case S514_BOTH_PORTS_SAME_CLK_MODE:
+ if(cmd == SET_CHDLC_CONFIGURATION) {
+ printk(KERN_INFO
+ "%s: Configure both ports for the same clock source\n",
+ card->devname);
+ break;
+ }
+
+ default:
+ printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n",
+ card->devname, cmd, err);
+ }
+
+ return 0;
+}
+
+MODULE_LICENSE("GPL");