aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/Kconfig')
-rw-r--r--drivers/net/wireless/Kconfig365
1 files changed, 365 insertions, 0 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
new file mode 100644
index 00000000000..0aaa12c0c09
--- /dev/null
+++ b/drivers/net/wireless/Kconfig
@@ -0,0 +1,365 @@
+#
+# Wireless LAN device configuration
+#
+
+menu "Wireless LAN (non-hamradio)"
+ depends on NETDEVICES
+
+config NET_RADIO
+ bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
+ ---help---
+ Support for wireless LANs and everything having to do with radio,
+ but not with amateur radio or FM broadcasting.
+
+ Saying Y here also enables the Wireless Extensions (creates
+ /proc/net/wireless and enables iwconfig access). The Wireless
+ Extension is a generic API allowing a driver to expose to the user
+ space configuration and statistics specific to common Wireless LANs.
+ The beauty of it is that a single set of tool can support all the
+ variations of Wireless LANs, regardless of their type (as long as
+ the driver supports Wireless Extension). Another advantage is that
+ these parameters may be changed on the fly without restarting the
+ driver (or Linux). If you wish to use Wireless Extensions with
+ wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
+ the tools from
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+ Some user-level drivers for scarab devices which don't require
+ special kernel support are available from
+ <ftp://shadow.cabi.net/pub/Linux/>.
+
+# Note : the cards are obsolete (can't buy them anymore), but the drivers
+# are not, as people are still using them...
+comment "Obsolete Wireless cards support (pre-802.11)"
+ depends on NET_RADIO && (INET || ISA || PCMCIA)
+
+config STRIP
+ tristate "STRIP (Metricom starmode radio IP)"
+ depends on NET_RADIO && INET
+ ---help---
+ Say Y if you have a Metricom radio and intend to use Starmode Radio
+ IP. STRIP is a radio protocol developed for the MosquitoNet project
+ (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
+ traffic using Metricom radios. Metricom radios are small, battery
+ powered, 100kbit/sec packet radio transceivers, about the size and
+ weight of a cellular telephone. (You may also have heard them called
+ "Metricom modems" but we avoid the term "modem" because it misleads
+ many people into thinking that you can plug a Metricom modem into a
+ phone line and use it as a modem.)
+
+ You can use STRIP on any Linux machine with a serial port, although
+ it is obviously most useful for people with laptop computers. If you
+ think you might get a Metricom radio in the future, there is no harm
+ in saying Y to STRIP now, except that it makes the kernel a bit
+ bigger.
+
+ To compile this as a module, choose M here: the module will be
+ called strip.
+
+config ARLAN
+ tristate "Aironet Arlan 655 & IC2200 DS support"
+ depends on NET_RADIO && ISA && !64BIT
+ ---help---
+ Aironet makes Arlan, a class of wireless LAN adapters. These use the
+ www.Telxon.com chip, which is also used on several similar cards.
+ This driver is tested on the 655 and IC2200 series cards. Look at
+ <http://www.ylenurme.ee/~elmer/655/> for the latest information.
+
+ The driver is built as two modules, arlan and arlan-proc. The latter
+ is the /proc interface and is not needed most of time.
+
+ On some computers the card ends up in non-valid state after some
+ time. Use a ping-reset script to clear it.
+
+config WAVELAN
+ tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
+ depends on NET_RADIO && ISA
+ ---help---
+ The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
+ a Radio LAN (wireless Ethernet-like Local Area Network) using the
+ radio frequencies 900 MHz and 2.4 GHz.
+
+ This driver support the ISA version of the WaveLAN card. A separate
+ driver for the PCMCIA (PC-card) hardware is available in David
+ Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+ for location).
+
+ If you want to use an ISA WaveLAN card under Linux, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Some more specific
+ information is contained in
+ <file:Documentation/networking/wavelan.txt> and in the source code
+ <file:drivers/net/wavelan.p.h>.
+
+ You will also need the wireless tools package available from
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+ Please read the man pages contained therein.
+
+ To compile this driver as a module, choose M here: the module will be
+ called wavelan.
+
+config PCMCIA_WAVELAN
+ tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
+ depends on NET_RADIO && PCMCIA
+ help
+ Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
+ (PC-card) wireless Ethernet networking card to your computer. This
+ driver is for the non-IEEE-802.11 Wavelan cards.
+
+ To compile this driver as a module, choose M here: the module will be
+ called wavelan_cs. If unsure, say N.
+
+config PCMCIA_NETWAVE
+ tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
+ depends on NET_RADIO && PCMCIA
+ help
+ Say Y here if you intend to attach this type of PCMCIA (PC-card)
+ wireless Ethernet networking card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called netwave_cs. If unsure, say N.
+
+comment "Wireless 802.11 Frequency Hopping cards support"
+ depends on NET_RADIO && PCMCIA
+
+config PCMCIA_RAYCS
+ tristate "Aviator/Raytheon 2.4MHz wireless support"
+ depends on NET_RADIO && PCMCIA
+ ---help---
+ Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
+ (PC-card) wireless Ethernet networking card to your computer.
+ Please read the file <file:Documentation/networking/ray_cs.txt> for
+ details.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ray_cs. If unsure, say N.
+
+comment "Wireless 802.11b ISA/PCI cards support"
+ depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
+
+config AIRO
+ tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
+ depends on NET_RADIO && ISA && (PCI || BROKEN)
+ ---help---
+ This is the standard Linux driver to support Cisco/Aironet ISA and
+ PCI 802.11 wireless cards.
+ It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+ - with or without encryption) as well as card before the Cisco
+ aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+
+ This driver support both the standard Linux Wireless Extensions
+ and Cisco proprietary API, so both the Linux Wireless Tools and the
+ Cisco Linux utilities can be used to configure the card.
+
+ The driver can be compiled as a module and will be named "airo".
+
+config HERMES
+ tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
+ depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA)
+ ---help---
+ A driver for 802.11b wireless cards based based on the "Hermes" or
+ Intersil HFA384x (Prism 2) MAC controller. This includes the vast
+ majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
+ - except for the Cisco/Aironet cards. Cards supported include the
+ Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
+ Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
+ IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
+ MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
+ PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+
+ This option includes the guts of the driver, but in order to
+ actually use a card you will also need to enable support for PCMCIA
+ Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
+
+ You will also very likely also need the Wireless Tools in order to
+ configure your card and that /etc/pcmcia/wireless.opts works :
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
+
+config APPLE_AIRPORT
+ tristate "Apple Airport support (built-in)"
+ depends on PPC_PMAC && HERMES
+ help
+ Say Y here to support the Airport 802.11b wireless Ethernet hardware
+ built into the Macintosh iBook and other recent PowerPC-based
+ Macintosh machines. This is essentially a Lucent Orinoco card with
+ a non-standard interface
+
+config PLX_HERMES
+ tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)"
+ depends on PCI && HERMES && EXPERIMENTAL
+ help
+ Enable support for PCMCIA cards supported by the "Hermes" (aka
+ orinoco) driver when used in PLX9052 based PCI adaptors. These
+ adaptors are not a full PCMCIA controller but act as a more limited
+ PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
+ 802.11b PCMCIA cards can be used in desktop machines. The Netgear
+ MA301 is such an adaptor.
+
+ Support for these adaptors is so far still incomplete and buggy.
+ You have been warned.
+
+config TMD_HERMES
+ tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)"
+ depends on PCI && HERMES && EXPERIMENTAL
+ help
+ Enable support for PCMCIA cards supported by the "Hermes" (aka
+ orinoco) driver when used in TMD7160 based PCI adaptors. These
+ adaptors are not a full PCMCIA controller but act as a more limited
+ PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
+ 802.11b PCMCIA cards can be used in desktop machines.
+
+ Support for these adaptors is so far still incomplete and buggy.
+ You have been warned.
+
+config PCI_HERMES
+ tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)"
+ depends on PCI && HERMES && EXPERIMENTAL
+ help
+ Enable support for PCI and mini-PCI 802.11b wireless NICs based on
+ the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
+ PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
+ common. Some of the built-in wireless adaptors in laptops are of
+ this variety.
+
+config ATMEL
+ tristate "Atmel at76c50x chipset 802.11b support"
+ depends on NET_RADIO && EXPERIMENTAL
+ select FW_LOADER
+ select CRC32
+ ---help---
+ A driver 802.11b wireless cards based on the Atmel fast-vnet
+ chips. This driver supports standard Linux wireless extensions.
+
+ Many cards based on this chipset do not have flash memory
+ and need their firmware loaded at start-up. If yours is
+ one of these, you will need to provide a firmware image
+ to be loaded into the card by the driver. The Atmel
+ firmware package can be downloaded from
+ <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+ tristate "Atmel at76c506 PCI cards"
+ depends on ATMEL && PCI
+ ---help---
+ Enable support for PCI and mini-PCI cards containing the
+ Atmel at76c506 chip.
+
+# If Pcmcia is compiled in, offer Pcmcia cards...
+comment "Wireless 802.11b Pcmcia/Cardbus cards support"
+ depends on NET_RADIO && PCMCIA
+
+config PCMCIA_HERMES
+ tristate "Hermes PCMCIA card support"
+ depends on NET_RADIO && PCMCIA && HERMES
+ ---help---
+ A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
+ as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
+ EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
+ others). It should also be usable on various Prism II based cards
+ such as the Linksys, D-Link and Farallon Skyline. It should also
+ work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
+
+ To use your PC-cards, you will need supporting software from David
+ Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+ for location). You also want to check out the PCMCIA-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ You will also very likely also need the Wireless Tools in order to
+ configure your card and that /etc/pcmcia/wireless.opts works:
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+config AIRO_CS
+ tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
+ depends on NET_RADIO && PCMCIA
+ ---help---
+ This is the standard Linux driver to support Cisco/Aironet PCMCIA
+ 802.11 wireless cards. This driver is the same as the Aironet
+ driver part of the Linux Pcmcia package.
+ It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+ - with or without encryption) as well as card before the Cisco
+ aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
+ supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
+ 802.11b cards.
+
+ This driver support both the standard Linux Wireless Extensions
+ and Cisco proprietary API, so both the Linux Wireless Tools and the
+ Cisco Linux utilities can be used to configure the card.
+
+ To use your PC-cards, you will need supporting software from David
+ Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+ for location). You also want to check out the PCMCIA-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+config PCMCIA_ATMEL
+ tristate "Atmel at76c502/at76c504 PCMCIA cards"
+ depends on NET_RADIO && ATMEL && PCMCIA
+ select FW_LOADER
+ select CRC32
+ ---help---
+ Enable support for PCMCIA cards containing the
+ Atmel at76c502 and at76c504 chips.
+
+config PCMCIA_WL3501
+ tristate "Planet WL3501 PCMCIA cards"
+ depends on NET_RADIO && EXPERIMENTAL && PCMCIA
+ ---help---
+ A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
+ It has basic support for Linux wireless extensions and initial
+ micro support for ethtool.
+
+comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support"
+ depends on NET_RADIO && PCI
+config PRISM54
+ tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
+ depends on PCI && NET_RADIO && EXPERIMENTAL
+ select FW_LOADER
+ ---help---
+ Enable PCI and Cardbus support for the following chipset based cards:
+
+ ISL3880 - Prism GT 802.11 b/g
+ ISL3877 - Prism Indigo 802.11 a
+ ISL3890 - Prism Duette 802.11 a/b/g
+
+ For a complete list of supported cards visit <http://prism54.org>.
+ Here is the latest confirmed list of supported cards:
+
+ 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+ Allnet ALL0271 PCI Card
+ Compex WL54G Cardbus Card
+ Corega CG-WLCB54GT Cardbus Card
+ D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
+ I-O Data WN-G54/CB Cardbus Card
+ Kobishi XG-300 aka Z-Com Cardbus Card
+ Netgear WG511 Cardbus Card
+ Ovislink WL-5400PCI PCI Card
+ Peabird WLG-PCI PCI Card
+ Sitecom WL-100i Cardbus Card
+ Sitecom WL-110i PCI Card
+ SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
+ SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+ SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+ Z-Com XG-900 PCI Card
+ Zyxel G-100 Cardbus Card
+
+ If you enable this you will need a firmware file as well.
+ You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
+ You can get this non-GPL'd firmware file from the Prism54 project page:
+ <http://prism54.org>
+ You will also need the /etc/hotplug/firmware.agent script from
+ a current hotplug package.
+
+ Note: You need a motherboard with DMA support to use any of these cards
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called prism54.ko.
+
+# yes, this works even when no drivers are selected
+config NET_WIRELESS
+ bool
+ depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
+ default y
+
+endmenu
+