aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/Kconfig')
-rw-r--r--drivers/net/wireless/Kconfig146
1 files changed, 25 insertions, 121 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index e4f9f747de8..8a0823588c5 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -151,6 +151,12 @@ config LIBERTAS_SDIO
---help---
A driver for Marvell Libertas 8385 and 8686 SDIO devices.
+config LIBERTAS_SPI
+ tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
+ depends on LIBERTAS && SPI && GENERIC_GPIO
+ ---help---
+ A driver for Marvell Libertas 8686 SPI devices.
+
config LIBERTAS_DEBUG
bool "Enable full debugging output in the Libertas module."
depends on LIBERTAS
@@ -188,127 +194,6 @@ config AIRO
The driver can be compiled as a module and will be named "airo".
-config HERMES
- tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
- depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
- select WIRELESS_EXT
- select FW_LOADER
- select CRYPTO
- select CRYPTO_MICHAEL_MIC
- ---help---
- A driver for 802.11b wireless cards based on the "Hermes" or
- Intersil HFA384x (Prism 2) MAC controller. This includes the vast
- majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
- - except for the Cisco/Aironet cards. Cards supported include the
- Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
- Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
- IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
- MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
- IPW2011, and Symbol Spectrum24 High Rate amongst others.
-
- This option includes the guts of the driver, but in order to
- actually use a card you will also need to enable support for PCMCIA
- Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
-
- You will also very likely also need the Wireless Tools in order to
- configure your card and that /etc/pcmcia/wireless.opts works :
- <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
-
-config HERMES_CACHE_FW_ON_INIT
- bool "Cache Hermes firmware on driver initialisation"
- depends on HERMES
- default y
- ---help---
- Say Y to cache any firmware required by the Hermes drivers
- on startup. The firmware will remain cached until the
- driver is unloaded. The cache uses 64K of RAM.
-
- Otherwise load the firmware from userspace as required. In
- this case the driver should be unloaded and restarted
- whenever the firmware is changed.
-
- If you are not sure, say Y.
-
-config APPLE_AIRPORT
- tristate "Apple Airport support (built-in)"
- depends on PPC_PMAC && HERMES
- help
- Say Y here to support the Airport 802.11b wireless Ethernet hardware
- built into the Macintosh iBook and other recent PowerPC-based
- Macintosh machines. This is essentially a Lucent Orinoco card with
- a non-standard interface.
-
- This driver does not support the Airport Extreme (802.11b/g). Use
- the BCM43xx driver for Airport Extreme cards.
-
-config PLX_HERMES
- tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
- depends on PCI && HERMES
- help
- Enable support for PCMCIA cards supported by the "Hermes" (aka
- orinoco) driver when used in PLX9052 based PCI adaptors. These
- adaptors are not a full PCMCIA controller but act as a more limited
- PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
- 802.11b PCMCIA cards can be used in desktop machines. The Netgear
- MA301 is such an adaptor.
-
-config TMD_HERMES
- tristate "Hermes in TMD7160 based PCI adaptor support"
- depends on PCI && HERMES
- help
- Enable support for PCMCIA cards supported by the "Hermes" (aka
- orinoco) driver when used in TMD7160 based PCI adaptors. These
- adaptors are not a full PCMCIA controller but act as a more limited
- PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
- 802.11b PCMCIA cards can be used in desktop machines.
-
-config NORTEL_HERMES
- tristate "Nortel emobility PCI adaptor support"
- depends on PCI && HERMES
- help
- Enable support for PCMCIA cards supported by the "Hermes" (aka
- orinoco) driver when used in Nortel emobility PCI adaptors. These
- adaptors are not full PCMCIA controllers, but act as a more limited
- PCI <-> PCMCIA bridge.
-
-config PCI_HERMES
- tristate "Prism 2.5 PCI 802.11b adaptor support"
- depends on PCI && HERMES
- help
- Enable support for PCI and mini-PCI 802.11b wireless NICs based on
- the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
- PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
- common. Some of the built-in wireless adaptors in laptops are of
- this variety.
-
-config PCMCIA_HERMES
- tristate "Hermes PCMCIA card support"
- depends on PCMCIA && HERMES
- ---help---
- A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
- as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
- EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
- others). It should also be usable on various Prism II based cards
- such as the Linksys, D-Link and Farallon Skyline. It should also
- work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
-
- You will very likely need the Wireless Tools in order to
- configure your card and that /etc/pcmcia/wireless.opts works:
- <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
-config PCMCIA_SPECTRUM
- tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
- depends on PCMCIA && HERMES
- ---help---
-
- This is a driver for 802.11b cards using RAM-loadable Symbol
- firmware, such as Symbol Wireless Networker LA4100, CompactFlash
- cards by Socket Communications and Intel PRO/Wireless 2011B.
-
- This driver requires firmware download on startup. Utilities
- for downloading Symbol firmware are available at
- <http://sourceforge.net/projects/orinoco/>
-
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
depends on (PCI || PCMCIA) && WLAN_80211
@@ -343,6 +228,14 @@ config PCMCIA_ATMEL
Enable support for PCMCIA cards containing the
Atmel at76c502 and at76c504 chips.
+config AT76C50X_USB
+ tristate "Atmel at76c503/at76c505/at76c505a USB cards"
+ depends on MAC80211 && WLAN_80211 && USB
+ select FW_LOADER
+ ---help---
+ Enable support for USB Wireless devices using Atmel at76c503,
+ at76c505 or at76c505a chips.
+
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
@@ -580,9 +473,19 @@ config MAC80211_HWSIM
To compile this driver as a module, choose M here: the module will be
called mac80211_hwsim. If unsure, say N.
+config MWL8K
+ tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
+ depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ ---help---
+ This driver supports Marvell TOPDOG 802.11 wireless cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mwl8k. If unsure, say N.
+
source "drivers/net/wireless/p54/Kconfig"
source "drivers/net/wireless/ath5k/Kconfig"
source "drivers/net/wireless/ath9k/Kconfig"
+source "drivers/net/wireless/ar9170/Kconfig"
source "drivers/net/wireless/ipw2x00/Kconfig"
source "drivers/net/wireless/iwlwifi/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
@@ -590,5 +493,6 @@ source "drivers/net/wireless/b43/Kconfig"
source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
source "drivers/net/wireless/rt2x00/Kconfig"
+source "drivers/net/wireless/orinoco/Kconfig"
endmenu