aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k/ath5k.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/ath5k.h')
-rw-r--r--drivers/net/wireless/ath/ath5k/ath5k.h1379
1 files changed, 1379 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
new file mode 100644
index 00000000000..6358233bac9
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -0,0 +1,1379 @@
+/*
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _ATH5K_H
+#define _ATH5K_H
+
+/* TODO: Clean up channel debuging -doesn't work anyway- and start
+ * working on reg. control code using all available eeprom information
+ * -rev. engineering needed- */
+#define CHAN_DEBUG 0
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <net/mac80211.h>
+
+#include "../regd.h"
+
+/* RX/TX descriptor hw structs
+ * TODO: Driver part should only see sw structs */
+#include "desc.h"
+
+/* EEPROM structs/offsets
+ * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
+ * and clean up common bits, then introduce set/get functions in eeprom.c */
+#include "eeprom.h"
+
+/* PCI IDs */
+#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */
+#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */
+#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */
+#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */
+#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */
+#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */
+#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */
+#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */
+#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */
+#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */
+#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */
+#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */
+
+/****************************\
+ GENERIC DRIVER DEFINITIONS
+\****************************/
+
+#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
+ printk(_level "ath5k %s: " _fmt, \
+ ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
+ ##__VA_ARGS__)
+
+#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
+ if (net_ratelimit()) \
+ ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
+ } while (0)
+
+#define ATH5K_INFO(_sc, _fmt, ...) \
+ ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_WARN(_sc, _fmt, ...) \
+ ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_ERR(_sc, _fmt, ...) \
+ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
+
+/*
+ * AR5K REGISTER ACCESS
+ */
+
+/* Some macros to read/write fields */
+
+/* First shift, then mask */
+#define AR5K_REG_SM(_val, _flags) \
+ (((_val) << _flags##_S) & (_flags))
+
+/* First mask, then shift */
+#define AR5K_REG_MS(_val, _flags) \
+ (((_val) & (_flags)) >> _flags##_S)
+
+/* Some registers can hold multiple values of interest. For this
+ * reason when we want to write to these registers we must first
+ * retrieve the values which we do not want to clear (lets call this
+ * old_data) and then set the register with this and our new_value:
+ * ( old_data | new_value) */
+#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \
+ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
+ (((_val) << _flags##_S) & (_flags)), _reg)
+
+#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \
+ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \
+ (_mask)) | (_flags), _reg)
+
+#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \
+ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
+
+#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \
+ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
+
+/* Access to PHY registers */
+#define AR5K_PHY_READ(ah, _reg) \
+ ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
+
+#define AR5K_PHY_WRITE(ah, _reg, _val) \
+ ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
+
+/* Access QCU registers per queue */
+#define AR5K_REG_READ_Q(ah, _reg, _queue) \
+ (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \
+
+#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \
+ ath5k_hw_reg_write(ah, (1 << _queue), _reg)
+
+#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \
+ _reg |= 1 << _queue; \
+} while (0)
+
+#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \
+ _reg &= ~(1 << _queue); \
+} while (0)
+
+/* Used while writing initvals */
+#define AR5K_REG_WAIT(_i) do { \
+ if (_i % 64) \
+ udelay(1); \
+} while (0)
+
+/* Register dumps are done per operation mode */
+#define AR5K_INI_RFGAIN_5GHZ 0
+#define AR5K_INI_RFGAIN_2GHZ 1
+
+/* TODO: Clean this up */
+#define AR5K_INI_VAL_11A 0
+#define AR5K_INI_VAL_11A_TURBO 1
+#define AR5K_INI_VAL_11B 2
+#define AR5K_INI_VAL_11G 3
+#define AR5K_INI_VAL_11G_TURBO 4
+#define AR5K_INI_VAL_XR 0
+#define AR5K_INI_VAL_MAX 5
+
+/* Used for BSSID etc manipulation */
+#define AR5K_LOW_ID(_a)( \
+(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \
+)
+
+#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8)
+
+/*
+ * Some tuneable values (these should be changeable by the user)
+ * TODO: Make use of them and add more options OR use debug/configfs
+ */
+#define AR5K_TUNE_DMA_BEACON_RESP 2
+#define AR5K_TUNE_SW_BEACON_RESP 10
+#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0
+#define AR5K_TUNE_RADAR_ALERT false
+#define AR5K_TUNE_MIN_TX_FIFO_THRES 1
+#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1)
+#define AR5K_TUNE_REGISTER_TIMEOUT 20000
+/* Register for RSSI threshold has a mask of 0xff, so 255 seems to
+ * be the max value. */
+#define AR5K_TUNE_RSSI_THRES 129
+/* This must be set when setting the RSSI threshold otherwise it can
+ * prevent a reset. If AR5K_RSSI_THR is read after writing to it
+ * the BMISS_THRES will be seen as 0, seems harware doesn't keep
+ * track of it. Max value depends on harware. For AR5210 this is just 7.
+ * For AR5211+ this seems to be up to 255. */
+#define AR5K_TUNE_BMISS_THRES 7
+#define AR5K_TUNE_REGISTER_DWELL_TIME 20000
+#define AR5K_TUNE_BEACON_INTERVAL 100
+#define AR5K_TUNE_AIFS 2
+#define AR5K_TUNE_AIFS_11B 2
+#define AR5K_TUNE_AIFS_XR 0
+#define AR5K_TUNE_CWMIN 15
+#define AR5K_TUNE_CWMIN_11B 31
+#define AR5K_TUNE_CWMIN_XR 3
+#define AR5K_TUNE_CWMAX 1023
+#define AR5K_TUNE_CWMAX_11B 1023
+#define AR5K_TUNE_CWMAX_XR 7
+#define AR5K_TUNE_NOISE_FLOOR -72
+#define AR5K_TUNE_MAX_TXPOWER 63
+#define AR5K_TUNE_DEFAULT_TXPOWER 25
+#define AR5K_TUNE_TPC_TXPOWER false
+#define AR5K_TUNE_HWTXTRIES 4
+
+#define AR5K_INIT_CARR_SENSE_EN 1
+
+/*Swap RX/TX Descriptor for big endian archs*/
+#if defined(__BIG_ENDIAN)
+#define AR5K_INIT_CFG ( \
+ AR5K_CFG_SWTD | AR5K_CFG_SWRD \
+)
+#else
+#define AR5K_INIT_CFG 0x00000000
+#endif
+
+/* Initial values */
+#define AR5K_INIT_CYCRSSI_THR1 2
+#define AR5K_INIT_TX_LATENCY 502
+#define AR5K_INIT_USEC 39
+#define AR5K_INIT_USEC_TURBO 79
+#define AR5K_INIT_USEC_32 31
+#define AR5K_INIT_SLOT_TIME 396
+#define AR5K_INIT_SLOT_TIME_TURBO 480
+#define AR5K_INIT_ACK_CTS_TIMEOUT 1024
+#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800
+#define AR5K_INIT_PROG_IFS 920
+#define AR5K_INIT_PROG_IFS_TURBO 960
+#define AR5K_INIT_EIFS 3440
+#define AR5K_INIT_EIFS_TURBO 6880
+#define AR5K_INIT_SIFS 560
+#define AR5K_INIT_SIFS_TURBO 480
+#define AR5K_INIT_SH_RETRY 10
+#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY
+#define AR5K_INIT_SSH_RETRY 32
+#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY
+#define AR5K_INIT_TX_RETRY 10
+
+#define AR5K_INIT_TRANSMIT_LATENCY ( \
+ (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
+ (AR5K_INIT_USEC) \
+)
+#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \
+ (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
+ (AR5K_INIT_USEC_TURBO) \
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL ( \
+ (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \
+ (AR5K_INIT_PROG_IFS) \
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \
+ (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
+ (AR5K_INIT_PROG_IFS_TURBO) \
+)
+
+/* token to use for aifs, cwmin, cwmax in MadWiFi */
+#define AR5K_TXQ_USEDEFAULT ((u32) -1)
+
+/* GENERIC CHIPSET DEFINITIONS */
+
+/* MAC Chips */
+enum ath5k_version {
+ AR5K_AR5210 = 0,
+ AR5K_AR5211 = 1,
+ AR5K_AR5212 = 2,
+};
+
+/* PHY Chips */
+enum ath5k_radio {
+ AR5K_RF5110 = 0,
+ AR5K_RF5111 = 1,
+ AR5K_RF5112 = 2,
+ AR5K_RF2413 = 3,
+ AR5K_RF5413 = 4,
+ AR5K_RF2316 = 5,
+ AR5K_RF2317 = 6,
+ AR5K_RF2425 = 7,
+};
+
+/*
+ * Common silicon revision/version values
+ */
+
+enum ath5k_srev_type {
+ AR5K_VERSION_MAC,
+ AR5K_VERSION_RAD,
+};
+
+struct ath5k_srev_name {
+ const char *sr_name;
+ enum ath5k_srev_type sr_type;
+ u_int sr_val;
+};
+
+#define AR5K_SREV_UNKNOWN 0xffff
+
+#define AR5K_SREV_AR5210 0x00 /* Crete */
+#define AR5K_SREV_AR5311 0x10 /* Maui 1 */
+#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */
+#define AR5K_SREV_AR5311B 0x30 /* Spirit */
+#define AR5K_SREV_AR5211 0x40 /* Oahu */
+#define AR5K_SREV_AR5212 0x50 /* Venice */
+#define AR5K_SREV_AR5213 0x55 /* ??? */
+#define AR5K_SREV_AR5213A 0x59 /* Hainan */
+#define AR5K_SREV_AR2413 0x78 /* Griffin lite */
+#define AR5K_SREV_AR2414 0x70 /* Griffin */
+#define AR5K_SREV_AR5424 0x90 /* Condor */
+#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */
+#define AR5K_SREV_AR5414 0xa0 /* Eagle */
+#define AR5K_SREV_AR2415 0xb0 /* Talon */
+#define AR5K_SREV_AR5416 0xc0 /* PCI-E */
+#define AR5K_SREV_AR5418 0xca /* PCI-E */
+#define AR5K_SREV_AR2425 0xe0 /* Swan */
+#define AR5K_SREV_AR2417 0xf0 /* Nala */
+
+#define AR5K_SREV_RAD_5110 0x00
+#define AR5K_SREV_RAD_5111 0x10
+#define AR5K_SREV_RAD_5111A 0x15
+#define AR5K_SREV_RAD_2111 0x20
+#define AR5K_SREV_RAD_5112 0x30
+#define AR5K_SREV_RAD_5112A 0x35
+#define AR5K_SREV_RAD_5112B 0x36
+#define AR5K_SREV_RAD_2112 0x40
+#define AR5K_SREV_RAD_2112A 0x45
+#define AR5K_SREV_RAD_2112B 0x46
+#define AR5K_SREV_RAD_2413 0x50
+#define AR5K_SREV_RAD_5413 0x60
+#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */
+#define AR5K_SREV_RAD_2317 0x80
+#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */
+#define AR5K_SREV_RAD_2425 0xa2
+#define AR5K_SREV_RAD_5133 0xc0
+
+#define AR5K_SREV_PHY_5211 0x30
+#define AR5K_SREV_PHY_5212 0x41
+#define AR5K_SREV_PHY_5212A 0x42
+#define AR5K_SREV_PHY_5212B 0x43
+#define AR5K_SREV_PHY_2413 0x45
+#define AR5K_SREV_PHY_5413 0x61
+#define AR5K_SREV_PHY_2425 0x70
+
+/* IEEE defs */
+#define IEEE80211_MAX_LEN 2500
+
+/* TODO add support to mac80211 for vendor-specific rates and modes */
+
+/*
+ * Some of this information is based on Documentation from:
+ *
+ * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
+ *
+ * Modulation for Atheros' eXtended Range - range enhancing extension that is
+ * supposed to double the distance an Atheros client device can keep a
+ * connection with an Atheros access point. This is achieved by increasing
+ * the receiver sensitivity up to, -105dBm, which is about 20dB above what
+ * the 802.11 specifications demand. In addition, new (proprietary) data rates
+ * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
+ *
+ * Please note that can you either use XR or TURBO but you cannot use both,
+ * they are exclusive.
+ *
+ */
+#define MODULATION_XR 0x00000200
+/*
+ * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
+ * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
+ * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
+ * channels. To use this feature your Access Point must also suport it.
+ * There is also a distinction between "static" and "dynamic" turbo modes:
+ *
+ * - Static: is the dumb version: devices set to this mode stick to it until
+ * the mode is turned off.
+ * - Dynamic: is the intelligent version, the network decides itself if it
+ * is ok to use turbo. As soon as traffic is detected on adjacent channels
+ * (which would get used in turbo mode), or when a non-turbo station joins
+ * the network, turbo mode won't be used until the situation changes again.
+ * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
+ * monitors the used radio band in order to decide whether turbo mode may
+ * be used or not.
+ *
+ * This article claims Super G sticks to bonding of channels 5 and 6 for
+ * USA:
+ *
+ * http://www.pcworld.com/article/id,113428-page,1/article.html
+ *
+ * The channel bonding seems to be driver specific though. In addition to
+ * deciding what channels will be used, these "Turbo" modes are accomplished
+ * by also enabling the following features:
+ *
+ * - Bursting: allows multiple frames to be sent at once, rather than pausing
+ * after each frame. Bursting is a standards-compliant feature that can be
+ * used with any Access Point.
+ * - Fast frames: increases the amount of information that can be sent per
+ * frame, also resulting in a reduction of transmission overhead. It is a
+ * proprietary feature that needs to be supported by the Access Point.
+ * - Compression: data frames are compressed in real time using a Lempel Ziv
+ * algorithm. This is done transparently. Once this feature is enabled,
+ * compression and decompression takes place inside the chipset, without
+ * putting additional load on the host CPU.
+ *
+ */
+#define MODULATION_TURBO 0x00000080
+
+enum ath5k_driver_mode {
+ AR5K_MODE_11A = 0,
+ AR5K_MODE_11A_TURBO = 1,
+ AR5K_MODE_11B = 2,
+ AR5K_MODE_11G = 3,
+ AR5K_MODE_11G_TURBO = 4,
+ AR5K_MODE_XR = 0,
+ AR5K_MODE_MAX = 5
+};
+
+enum ath5k_ant_mode {
+ AR5K_ANTMODE_DEFAULT = 0, /* default antenna setup */
+ AR5K_ANTMODE_FIXED_A = 1, /* only antenna A is present */
+ AR5K_ANTMODE_FIXED_B = 2, /* only antenna B is present */
+ AR5K_ANTMODE_SINGLE_AP = 3, /* sta locked on a single ap */
+ AR5K_ANTMODE_SECTOR_AP = 4, /* AP with tx antenna set on tx desc */
+ AR5K_ANTMODE_SECTOR_STA = 5, /* STA with tx antenna set on tx desc */
+ AR5K_ANTMODE_DEBUG = 6, /* Debug mode -A -> Rx, B-> Tx- */
+ AR5K_ANTMODE_MAX,
+};
+
+
+/****************\
+ TX DEFINITIONS
+\****************/
+
+/*
+ * TX Status descriptor
+ */
+struct ath5k_tx_status {
+ u16 ts_seqnum;
+ u16 ts_tstamp;
+ u8 ts_status;
+ u8 ts_rate[4];
+ u8 ts_retry[4];
+ u8 ts_final_idx;
+ s8 ts_rssi;
+ u8 ts_shortretry;
+ u8 ts_longretry;
+ u8 ts_virtcol;
+ u8 ts_antenna;
+};
+
+#define AR5K_TXSTAT_ALTRATE 0x80
+#define AR5K_TXERR_XRETRY 0x01
+#define AR5K_TXERR_FILT 0x02
+#define AR5K_TXERR_FIFO 0x04
+
+/**
+ * enum ath5k_tx_queue - Queue types used to classify tx queues.
+ * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
+ * @AR5K_TX_QUEUE_DATA: A normal data queue
+ * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
+ * @AR5K_TX_QUEUE_BEACON: The beacon queue
+ * @AR5K_TX_QUEUE_CAB: The after-beacon queue
+ * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
+ */
+enum ath5k_tx_queue {
+ AR5K_TX_QUEUE_INACTIVE = 0,
+ AR5K_TX_QUEUE_DATA,
+ AR5K_TX_QUEUE_XR_DATA,
+ AR5K_TX_QUEUE_BEACON,
+ AR5K_TX_QUEUE_CAB,
+ AR5K_TX_QUEUE_UAPSD,
+};
+
+#define AR5K_NUM_TX_QUEUES 10
+#define AR5K_NUM_TX_QUEUES_NOQCU 2
+
+/*
+ * Queue syb-types to classify normal data queues.
+ * These are the 4 Access Categories as defined in
+ * WME spec. 0 is the lowest priority and 4 is the
+ * highest. Normal data that hasn't been classified
+ * goes to the Best Effort AC.
+ */
+enum ath5k_tx_queue_subtype {
+ AR5K_WME_AC_BK = 0, /*Background traffic*/
+ AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/
+ AR5K_WME_AC_VI, /*Video traffic*/
+ AR5K_WME_AC_VO, /*Voice traffic*/
+};
+
+/*
+ * Queue ID numbers as returned by the hw functions, each number
+ * represents a hw queue. If hw does not support hw queues
+ * (eg 5210) all data goes in one queue. These match
+ * d80211 definitions (net80211/MadWiFi don't use them).
+ */
+enum ath5k_tx_queue_id {
+ AR5K_TX_QUEUE_ID_NOQCU_DATA = 0,
+ AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1,
+ AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/
+ AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/
+ AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
+ AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
+ AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/
+ AR5K_TX_QUEUE_ID_UAPSD = 8,
+ AR5K_TX_QUEUE_ID_XR_DATA = 9,
+};
+
+/*
+ * Flags to set hw queue's parameters...
+ */
+#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */
+#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */
+#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */
+#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */
+#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */
+#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */
+#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */
+#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */
+#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */
+#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */
+#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/
+#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */
+#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */
+#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/
+
+/*
+ * A struct to hold tx queue's parameters
+ */
+struct ath5k_txq_info {
+ enum ath5k_tx_queue tqi_type;
+ enum ath5k_tx_queue_subtype tqi_subtype;
+ u16 tqi_flags; /* Tx queue flags (see above) */
+ u32 tqi_aifs; /* Arbitrated Interframe Space */
+ s32 tqi_cw_min; /* Minimum Contention Window */
+ s32 tqi_cw_max; /* Maximum Contention Window */
+ u32 tqi_cbr_period; /* Constant bit rate period */
+ u32 tqi_cbr_overflow_limit;
+ u32 tqi_burst_time;
+ u32 tqi_ready_time; /* Not used */
+};
+
+/*
+ * Transmit packet types.
+ * used on tx control descriptor
+ * TODO: Use them inside base.c corectly
+ */
+enum ath5k_pkt_type {
+ AR5K_PKT_TYPE_NORMAL = 0,
+ AR5K_PKT_TYPE_ATIM = 1,
+ AR5K_PKT_TYPE_PSPOLL = 2,
+ AR5K_PKT_TYPE_BEACON = 3,
+ AR5K_PKT_TYPE_PROBE_RESP = 4,
+ AR5K_PKT_TYPE_PIFS = 5,
+};
+
+/*
+ * TX power and TPC settings
+ */
+#define AR5K_TXPOWER_OFDM(_r, _v) ( \
+ ((0 & 1) << ((_v) + 6)) | \
+ (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \
+)
+
+#define AR5K_TXPOWER_CCK(_r, _v) ( \
+ (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \
+)
+
+/*
+ * DMA size definitions (2^n+2)
+ */
+enum ath5k_dmasize {
+ AR5K_DMASIZE_4B = 0,
+ AR5K_DMASIZE_8B,
+ AR5K_DMASIZE_16B,
+ AR5K_DMASIZE_32B,
+ AR5K_DMASIZE_64B,
+ AR5K_DMASIZE_128B,
+ AR5K_DMASIZE_256B,
+ AR5K_DMASIZE_512B
+};
+
+
+/****************\
+ RX DEFINITIONS
+\****************/
+
+/*
+ * RX Status descriptor
+ */
+struct ath5k_rx_status {
+ u16 rs_datalen;
+ u16 rs_tstamp;
+ u8 rs_status;
+ u8 rs_phyerr;
+ s8 rs_rssi;
+ u8 rs_keyix;
+ u8 rs_rate;
+ u8 rs_antenna;
+ u8 rs_more;
+};
+
+#define AR5K_RXERR_CRC 0x01
+#define AR5K_RXERR_PHY 0x02
+#define AR5K_RXERR_FIFO 0x04
+#define AR5K_RXERR_DECRYPT 0x08
+#define AR5K_RXERR_MIC 0x10
+#define AR5K_RXKEYIX_INVALID ((u8) - 1)
+#define AR5K_TXKEYIX_INVALID ((u32) - 1)
+
+
+/**************************\
+ BEACON TIMERS DEFINITIONS
+\**************************/
+
+#define AR5K_BEACON_PERIOD 0x0000ffff
+#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/
+#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/
+
+#if 0
+/**
+ * struct ath5k_beacon_state - Per-station beacon timer state.
+ * @bs_interval: in TU's, can also include the above flags
+ * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a
+ * Point Coordination Function capable AP
+ */
+struct ath5k_beacon_state {
+ u32 bs_next_beacon;
+ u32 bs_next_dtim;
+ u32 bs_interval;
+ u8 bs_dtim_period;
+ u8 bs_cfp_period;
+ u16 bs_cfp_max_duration;
+ u16 bs_cfp_du_remain;
+ u16 bs_tim_offset;
+ u16 bs_sleep_duration;
+ u16 bs_bmiss_threshold;
+ u32 bs_cfp_next;
+};
+#endif
+
+
+/*
+ * TSF to TU conversion:
+ *
+ * TSF is a 64bit value in usec (microseconds).
+ * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
+ * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
+ */
+#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
+
+
+/*******************************\
+ GAIN OPTIMIZATION DEFINITIONS
+\*******************************/
+
+enum ath5k_rfgain {
+ AR5K_RFGAIN_INACTIVE = 0,
+ AR5K_RFGAIN_ACTIVE,
+ AR5K_RFGAIN_READ_REQUESTED,
+ AR5K_RFGAIN_NEED_CHANGE,
+};
+
+struct ath5k_gain {
+ u8 g_step_idx;
+ u8 g_current;
+ u8 g_target;
+ u8 g_low;
+ u8 g_high;
+ u8 g_f_corr;
+ u8 g_state;
+};
+
+/********************\
+ COMMON DEFINITIONS
+\********************/
+
+#define AR5K_SLOT_TIME_9 396
+#define AR5K_SLOT_TIME_20 880
+#define AR5K_SLOT_TIME_MAX 0xffff
+
+/* channel_flags */
+#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */
+#define CHANNEL_TURBO 0x0010 /* Turbo Channel */
+#define CHANNEL_CCK 0x0020 /* CCK channel */
+#define CHANNEL_OFDM 0x0040 /* OFDM channel */
+#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */
+#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */
+#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */
+#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */
+#define CHANNEL_XR 0x0800 /* XR channel */
+
+#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM)
+#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK)
+#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM)
+#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
+#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
+#define CHANNEL_108A CHANNEL_T
+#define CHANNEL_108G CHANNEL_TG
+#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
+
+#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
+ CHANNEL_TURBO)
+
+#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO)
+#define CHANNEL_MODES CHANNEL_ALL
+
+/*
+ * Used internaly for reset_tx_queue).
+ * Also see struct struct ieee80211_channel.
+ */
+#define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0)
+#define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0)
+
+/*
+ * The following structure is used to map 2GHz channels to
+ * 5GHz Atheros channels.
+ * TODO: Clean up
+ */
+struct ath5k_athchan_2ghz {
+ u32 a2_flags;
+ u16 a2_athchan;
+};
+
+
+/******************\
+ RATE DEFINITIONS
+\******************/
+
+/**
+ * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
+ *
+ * The rate code is used to get the RX rate or set the TX rate on the
+ * hardware descriptors. It is also used for internal modulation control
+ * and settings.
+ *
+ * This is the hardware rate map we are aware of:
+ *
+ * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08
+ * rate_kbps 3000 1000 ? ? ? 2000 500 48000
+ *
+ * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10
+ * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ?
+ *
+ * rate_code 17 18 19 20 21 22 23 24
+ * rate_kbps ? ? ? ? ? ? ? 11000
+ *
+ * rate_code 25 26 27 28 29 30 31 32
+ * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ?
+ *
+ * "S" indicates CCK rates with short preamble.
+ *
+ * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
+ * lowest 4 bits, so they are the same as below with a 0xF mask.
+ * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
+ * We handle this in ath5k_setup_bands().
+ */
+#define AR5K_MAX_RATES 32
+
+/* B */
+#define ATH5K_RATE_CODE_1M 0x1B
+#define ATH5K_RATE_CODE_2M 0x1A
+#define ATH5K_RATE_CODE_5_5M 0x19
+#define ATH5K_RATE_CODE_11M 0x18
+/* A and G */
+#define ATH5K_RATE_CODE_6M 0x0B
+#define ATH5K_RATE_CODE_9M 0x0F
+#define ATH5K_RATE_CODE_12M 0x0A
+#define ATH5K_RATE_CODE_18M 0x0E
+#define ATH5K_RATE_CODE_24M 0x09
+#define ATH5K_RATE_CODE_36M 0x0D
+#define ATH5K_RATE_CODE_48M 0x08
+#define ATH5K_RATE_CODE_54M 0x0C
+/* XR */
+#define ATH5K_RATE_CODE_XR_500K 0x07
+#define ATH5K_RATE_CODE_XR_1M 0x02
+#define ATH5K_RATE_CODE_XR_2M 0x06
+#define ATH5K_RATE_CODE_XR_3M 0x01
+
+/* adding this flag to rate_code enables short preamble */
+#define AR5K_SET_SHORT_PREAMBLE 0x04
+
+/*
+ * Crypto definitions
+ */
+
+#define AR5K_KEYCACHE_SIZE 8
+
+/***********************\
+ HW RELATED DEFINITIONS
+\***********************/
+
+/*
+ * Misc definitions
+ */
+#define AR5K_RSSI_EP_MULTIPLIER (1<<7)
+
+#define AR5K_ASSERT_ENTRY(_e, _s) do { \
+ if (_e >= _s) \
+ return (false); \
+} while (0)
+
+/*
+ * Hardware interrupt abstraction
+ */
+
+/**
+ * enum ath5k_int - Hardware interrupt masks helpers
+ *
+ * @AR5K_INT_RX: mask to identify received frame interrupts, of type
+ * AR5K_ISR_RXOK or AR5K_ISR_RXERR
+ * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
+ * @AR5K_INT_RXNOFRM: No frame received (?)
+ * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
+ * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
+ * LinkPtr is NULL. For more details, refer to:
+ * http://www.freepatentsonline.com/20030225739.html
+ * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
+ * Note that Rx overrun is not always fatal, on some chips we can continue
+ * operation without reseting the card, that's why int_fatal is not
+ * common for all chips.
+ * @AR5K_INT_TX: mask to identify received frame interrupts, of type
+ * AR5K_ISR_TXOK or AR5K_ISR_TXERR
+ * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
+ * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
+ * We currently do increments on interrupt by
+ * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
+ * @AR5K_INT_MIB: Indicates the Management Information Base counters should be
+ * checked. We should do this with ath5k_hw_update_mib_counters() but
+ * it seems we should also then do some noise immunity work.
+ * @AR5K_INT_RXPHY: RX PHY Error
+ * @AR5K_INT_RXKCM: RX Key cache miss
+ * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
+ * beacon that must be handled in software. The alternative is if you
+ * have VEOL support, in that case you let the hardware deal with things.
+ * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
+ * beacons from the AP have associated with, we should probably try to
+ * reassociate. When in IBSS mode this might mean we have not received
+ * any beacons from any local stations. Note that every station in an
+ * IBSS schedules to send beacons at the Target Beacon Transmission Time
+ * (TBTT) with a random backoff.
+ * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
+ * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
+ * until properly handled
+ * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
+ * errors. These types of errors we can enable seem to be of type
+ * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
+ * @AR5K_INT_GLOBAL: Used to clear and set the IER
+ * @AR5K_INT_NOCARD: signals the card has been removed
+ * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
+ * bit value
+ *
+ * These are mapped to take advantage of some common bits
+ * between the MACs, to be able to set intr properties
+ * easier. Some of them are not used yet inside hw.c. Most map
+ * to the respective hw interrupt value as they are common amogst different
+ * MACs.
+ */
+enum ath5k_int {
+ AR5K_INT_RXOK = 0x00000001,
+ AR5K_INT_RXDESC = 0x00000002,
+ AR5K_INT_RXERR = 0x00000004,
+ AR5K_INT_RXNOFRM = 0x00000008,
+ AR5K_INT_RXEOL = 0x00000010,
+ AR5K_INT_RXORN = 0x00000020,
+ AR5K_INT_TXOK = 0x00000040,
+ AR5K_INT_TXDESC = 0x00000080,
+ AR5K_INT_TXERR = 0x00000100,
+ AR5K_INT_TXNOFRM = 0x00000200,
+ AR5K_INT_TXEOL = 0x00000400,
+ AR5K_INT_TXURN = 0x00000800,
+ AR5K_INT_MIB = 0x00001000,
+ AR5K_INT_SWI = 0x00002000,
+ AR5K_INT_RXPHY = 0x00004000,
+ AR5K_INT_RXKCM = 0x00008000,
+ AR5K_INT_SWBA = 0x00010000,
+ AR5K_INT_BRSSI = 0x00020000,
+ AR5K_INT_BMISS = 0x00040000,
+ AR5K_INT_FATAL = 0x00080000, /* Non common */
+ AR5K_INT_BNR = 0x00100000, /* Non common */
+ AR5K_INT_TIM = 0x00200000, /* Non common */
+ AR5K_INT_DTIM = 0x00400000, /* Non common */
+ AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */
+ AR5K_INT_GPIO = 0x01000000,
+ AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */
+ AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */
+ AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */
+ AR5K_INT_QCBRORN = 0x10000000, /* Non common */
+ AR5K_INT_QCBRURN = 0x20000000, /* Non common */
+ AR5K_INT_QTRIG = 0x40000000, /* Non common */
+ AR5K_INT_GLOBAL = 0x80000000,
+
+ AR5K_INT_COMMON = AR5K_INT_RXOK
+ | AR5K_INT_RXDESC
+ | AR5K_INT_RXERR
+ | AR5K_INT_RXNOFRM
+ | AR5K_INT_RXEOL
+ | AR5K_INT_RXORN
+ | AR5K_INT_TXOK
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXERR
+ | AR5K_INT_TXNOFRM
+ | AR5K_INT_TXEOL
+ | AR5K_INT_TXURN
+ | AR5K_INT_MIB
+ | AR5K_INT_SWI
+ | AR5K_INT_RXPHY
+ | AR5K_INT_RXKCM
+ | AR5K_INT_SWBA
+ | AR5K_INT_BRSSI
+ | AR5K_INT_BMISS
+ | AR5K_INT_GPIO
+ | AR5K_INT_GLOBAL,
+
+ AR5K_INT_NOCARD = 0xffffffff
+};
+
+/*
+ * Power management
+ */
+enum ath5k_power_mode {
+ AR5K_PM_UNDEFINED = 0,
+ AR5K_PM_AUTO,
+ AR5K_PM_AWAKE,
+ AR5K_PM_FULL_SLEEP,
+ AR5K_PM_NETWORK_SLEEP,
+};
+
+/*
+ * These match net80211 definitions (not used in
+ * mac80211).
+ * TODO: Clean this up
+ */
+#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/
+#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/
+#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/
+#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/
+#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/
+
+/* GPIO-controlled software LED */
+#define AR5K_SOFTLED_PIN 0
+#define AR5K_SOFTLED_ON 0
+#define AR5K_SOFTLED_OFF 1
+
+/*
+ * Chipset capabilities -see ath5k_hw_get_capability-
+ * get_capability function is not yet fully implemented
+ * in ath5k so most of these don't work yet...
+ * TODO: Implement these & merge with _TUNE_ stuff above
+ */
+enum ath5k_capability_type {
+ AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */
+ AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */
+ AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */
+ AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */
+ AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */
+ AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */
+ AR5K_CAP_VEOL = 7, /* Supports virtual EOL */
+ AR5K_CAP_COMPRESSION = 8, /* Supports compression */
+ AR5K_CAP_BURST = 9, /* Supports packet bursting */
+ AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */
+ AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */
+ AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */
+ AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */
+ AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */
+ AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */
+ AR5K_CAP_XR = 16, /* Supports XR mode */
+ AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */
+ AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */
+ AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */
+ AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */
+};
+
+
+/* XXX: we *may* move cap_range stuff to struct wiphy */
+struct ath5k_capabilities {
+ /*
+ * Supported PHY modes
+ * (ie. CHANNEL_A, CHANNEL_B, ...)
+ */
+ DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
+
+ /*
+ * Frequency range (without regulation restrictions)
+ */
+ struct {
+ u16 range_2ghz_min;
+ u16 range_2ghz_max;
+ u16 range_5ghz_min;
+ u16 range_5ghz_max;
+ } cap_range;
+
+ /*
+ * Values stored in the EEPROM (some of them...)
+ */
+ struct ath5k_eeprom_info cap_eeprom;
+
+ /*
+ * Queue information
+ */
+ struct {
+ u8 q_tx_num;
+ } cap_queues;
+};
+
+
+/***************************************\
+ HARDWARE ABSTRACTION LAYER STRUCTURE
+\***************************************/
+
+/*
+ * Misc defines
+ */
+
+#define AR5K_MAX_GPIO 10
+#define AR5K_MAX_RF_BANKS 8
+
+/* TODO: Clean up and merge with ath5k_softc */
+struct ath5k_hw {
+ u32 ah_magic;
+
+ struct ath5k_softc *ah_sc;
+ void __iomem *ah_iobase;
+
+ enum ath5k_int ah_imr;
+
+ enum nl80211_iftype ah_op_mode;
+ enum ath5k_power_mode ah_power_mode;
+ struct ieee80211_channel ah_current_channel;
+ bool ah_turbo;
+ bool ah_calibration;
+ bool ah_running;
+ bool ah_single_chip;
+ bool ah_combined_mic;
+
+ u32 ah_mac_srev;
+ u16 ah_mac_version;
+ u16 ah_mac_revision;
+ u16 ah_phy_revision;
+ u16 ah_radio_5ghz_revision;
+ u16 ah_radio_2ghz_revision;
+
+ enum ath5k_version ah_version;
+ enum ath5k_radio ah_radio;
+ u32 ah_phy;
+
+ bool ah_5ghz;
+ bool ah_2ghz;
+
+#define ah_modes ah_capabilities.cap_mode
+#define ah_ee_version ah_capabilities.cap_eeprom.ee_version
+
+ u32 ah_atim_window;
+ u32 ah_aifs;
+ u32 ah_cw_min;
+ u32 ah_cw_max;
+ bool ah_software_retry;
+ u32 ah_limit_tx_retries;
+
+ /* Antenna Control */
+ u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
+ u8 ah_ant_mode;
+ u8 ah_tx_ant;
+ u8 ah_def_ant;
+
+ u8 ah_sta_id[ETH_ALEN];
+
+ /* Current BSSID we are trying to assoc to / create.
+ * This is passed by mac80211 on config_interface() and cached here for
+ * use in resets */
+ u8 ah_bssid[ETH_ALEN];
+ u8 ah_bssid_mask[ETH_ALEN];
+
+ u32 ah_gpio[AR5K_MAX_GPIO];
+ int ah_gpio_npins;
+
+ struct ath_regulatory ah_regulatory;
+ struct ath5k_capabilities ah_capabilities;
+
+ struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES];
+ u32 ah_txq_status;
+ u32 ah_txq_imr_txok;
+ u32 ah_txq_imr_txerr;
+ u32 ah_txq_imr_txurn;
+ u32 ah_txq_imr_txdesc;
+ u32 ah_txq_imr_txeol;
+ u32 ah_txq_imr_cbrorn;
+ u32 ah_txq_imr_cbrurn;
+ u32 ah_txq_imr_qtrig;
+ u32 ah_txq_imr_nofrm;
+ u32 ah_txq_isr;
+ u32 *ah_rf_banks;
+ size_t ah_rf_banks_size;
+ size_t ah_rf_regs_count;
+ struct ath5k_gain ah_gain;
+ u8 ah_offset[AR5K_MAX_RF_BANKS];
+
+
+ struct {
+ /* Temporary tables used for interpolation */
+ u8 tmpL[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_POWER_TABLE_SIZE];
+ u8 tmpR[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_POWER_TABLE_SIZE];
+ u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2];
+ u16 txp_rates_power_table[AR5K_MAX_RATES];
+ u8 txp_min_idx;
+ bool txp_tpc;
+ /* Values in 0.25dB units */
+ s16 txp_min_pwr;
+ s16 txp_max_pwr;
+ /* Values in 0.5dB units */
+ s16 txp_offset;
+ s16 txp_ofdm;
+ s16 txp_cck_ofdm_gainf_delta;
+ /* Value in dB units */
+ s16 txp_cck_ofdm_pwr_delta;
+ } ah_txpower;
+
+ struct {
+ bool r_enabled;
+ int r_last_alert;
+ struct ieee80211_channel r_last_channel;
+ } ah_radar;
+
+ /* noise floor from last periodic calibration */
+ s32 ah_noise_floor;
+
+ /*
+ * Function pointers
+ */
+ int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ u32 size, unsigned int flags);
+ int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
+ unsigned int, unsigned int, unsigned int, unsigned int,
+ unsigned int, unsigned int, unsigned int);
+ int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ unsigned int, unsigned int, unsigned int, unsigned int,
+ unsigned int, unsigned int);
+ int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ struct ath5k_tx_status *);
+ int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ struct ath5k_rx_status *);
+};
+
+/*
+ * Prototypes
+ */
+
+/* Attach/Detach Functions */
+extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
+extern void ath5k_hw_detach(struct ath5k_hw *ah);
+
+/* LED functions */
+extern int ath5k_init_leds(struct ath5k_softc *sc);
+extern void ath5k_led_enable(struct ath5k_softc *sc);
+extern void ath5k_led_off(struct ath5k_softc *sc);
+extern void ath5k_unregister_leds(struct ath5k_softc *sc);
+
+/* Reset Functions */
+extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
+extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel);
+/* Power management functions */
+extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
+
+/* DMA Related Functions */
+extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
+extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
+extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
+extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
+extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
+extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
+ u32 phys_addr);
+extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
+/* Interrupt handling */
+extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
+extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
+extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum
+ath5k_int new_mask);
+extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats);
+
+/* EEPROM access functions */
+extern int ath5k_eeprom_init(struct ath5k_hw *ah);
+extern void ath5k_eeprom_detach(struct ath5k_hw *ah);
+extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
+extern bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah);
+
+/* Protocol Control Unit Functions */
+extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
+/* BSSID Functions */
+extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
+extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
+extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
+extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
+/* Receive start/stop functions */
+extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
+extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
+/* RX Filter functions */
+extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
+extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
+extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
+extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
+extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
+/* Beacon control functions */
+extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
+extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
+extern void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64);
+extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
+extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
+#if 0
+extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state);
+extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah);
+extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr);
+#endif
+/* ACK bit rate */
+void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
+/* ACK/CTS Timeouts */
+extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
+extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
+extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
+extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
+/* Key table (WEP) functions */
+extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
+extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
+extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
+extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
+
+/* Queue Control Unit, DFS Control Unit Functions */
+extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+ const struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
+ enum ath5k_tx_queue queue_type,
+ struct ath5k_txq_info *queue_info);
+extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
+extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
+extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
+extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
+
+/* Hardware Descriptor Functions */
+extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
+
+/* GPIO Functions */
+extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
+extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
+extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
+extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
+extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
+extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
+
+/* rfkill Functions */
+extern void ath5k_rfkill_hw_start(struct ath5k_hw *ah);
+extern void ath5k_rfkill_hw_stop(struct ath5k_hw *ah);
+
+/* Misc functions */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
+extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
+extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
+extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
+
+/* Initial register settings functions */
+extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
+
+/* Initialize RF */
+extern int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ unsigned int mode);
+extern int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq);
+extern enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah);
+extern int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah);
+/* PHY/RF channel functions */
+extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
+extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
+/* PHY calibration */
+extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
+extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+/* Spur mitigation */
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel);
+void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel);
+/* Misc PHY functions */
+extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
+extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+/* Antenna control */
+extern void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode);
+extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant);
+extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
+/* TX power setup */
+extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower);
+extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
+
+/*
+ * Functions used internaly
+ */
+
+/*
+ * Translate usec to hw clock units
+ * TODO: Half/quarter rate
+ */
+static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
+{
+ return turbo ? (usec * 80) : (usec * 40);
+}
+
+/*
+ * Translate hw clock units to usec
+ * TODO: Half/quarter rate
+ */
+static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
+{
+ return turbo ? (clock / 80) : (clock / 40);
+}
+
+/*
+ * Read from a register
+ */
+static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
+{
+ return ioread32(ah->ah_iobase + reg);
+}
+
+/*
+ * Write to a register
+ */
+static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
+{
+ iowrite32(val, ah->ah_iobase + reg);
+}
+
+#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY)
+/*
+ * Check if a register write has been completed
+ */
+static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag,
+ u32 val, bool is_set)
+{
+ int i;
+ u32 data;
+
+ for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
+ data = ath5k_hw_reg_read(ah, reg);
+ if (is_set && (data & flag))
+ break;
+ else if ((data & flag) == val)
+ break;
+ udelay(15);
+ }
+
+ return (i <= 0) ? -EAGAIN : 0;
+}
+#endif
+
+static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
+{
+ u32 retval = 0, bit, i;
+
+ for (i = 0; i < bits; i++) {
+ bit = (val >> i) & 1;
+ retval = (retval << 1) | bit;
+ }
+
+ return retval;
+}
+
+static inline int ath5k_pad_size(int hdrlen)
+{
+ return (hdrlen < 24) ? 0 : hdrlen & 3;
+}
+
+#endif