aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k/pcu.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/pcu.c')
-rw-r--r--drivers/net/wireless/ath/ath5k/pcu.c1174
1 files changed, 1174 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
new file mode 100644
index 00000000000..ec35503f6a4
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -0,0 +1,1174 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*********************************\
+* Protocol Control Unit Functions *
+\*********************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*******************\
+* Generic functions *
+\*******************/
+
+/**
+ * ath5k_hw_set_opmode - Set PCU operating mode
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Initialize PCU for the various operating modes (AP/STA etc)
+ *
+ * NOTE: ah->ah_op_mode must be set before calling this.
+ */
+int ath5k_hw_set_opmode(struct ath5k_hw *ah)
+{
+ u32 pcu_reg, beacon_reg, low_id, high_id;
+
+
+ /* Preserve rest settings */
+ pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
+ pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP
+ | AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0));
+
+ beacon_reg = 0;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ switch (ah->ah_op_mode) {
+ case NL80211_IFTYPE_ADHOC:
+ pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE;
+ beacon_reg |= AR5K_BCR_ADHOC;
+ if (ah->ah_version == AR5K_AR5210)
+ pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
+ break;
+
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
+ pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE;
+ beacon_reg |= AR5K_BCR_AP;
+ if (ah->ah_version == AR5K_AR5210)
+ pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
+ break;
+
+ case NL80211_IFTYPE_STATION:
+ pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_PWR_SV : 0);
+ case NL80211_IFTYPE_MONITOR:
+ pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_NO_PSPOLL : 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Set PCU registers
+ */
+ low_id = AR5K_LOW_ID(ah->ah_sta_id);
+ high_id = AR5K_HIGH_ID(ah->ah_sta_id);
+ ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+ ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+ /*
+ * Set Beacon Control Register on 5210
+ */
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_update - Update mib counters (mac layer statistics)
+ *
+ * @ah: The &struct ath5k_hw
+ * @stats: The &struct ieee80211_low_level_stats we use to track
+ * statistics on the driver
+ *
+ * Reads MIB counters from PCU and updates sw statistics. Must be
+ * called after a MIB interrupt.
+ */
+void ath5k_hw_update_mib_counters(struct ath5k_hw *ah,
+ struct ieee80211_low_level_stats *stats)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Read-And-Clear */
+ stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL);
+ stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL);
+ stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK);
+ stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL);
+
+ /* XXX: Should we use this to track beacon count ?
+ * -we read it anyway to clear the register */
+ ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
+
+ /* Reset profile count registers on 5212*/
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
+ }
+
+ /* TODO: Handle ANI stats */
+}
+
+/**
+ * ath5k_hw_set_ack_bitrate - set bitrate for ACKs
+ *
+ * @ah: The &struct ath5k_hw
+ * @high: Flag to determine if we want to use high transmition rate
+ * for ACKs or not
+ *
+ * If high flag is set, we tell hw to use a set of control rates based on
+ * the current transmition rate (check out control_rates array inside reset.c).
+ * If not hw just uses the lowest rate available for the current modulation
+ * scheme being used (1Mbit for CCK and 6Mbits for OFDM).
+ */
+void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
+{
+ if (ah->ah_version != AR5K_AR5212)
+ return;
+ else {
+ u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
+ if (high)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+ }
+}
+
+
+/******************\
+* ACK/CTS Timeouts *
+\******************/
+
+/**
+ * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+ AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo);
+}
+
+/**
+ * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU
+ *
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK),
+ ah->ah_turbo) <= timeout)
+ return -EINVAL;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
+ ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+ AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo);
+}
+
+/**
+ * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU
+ *
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS),
+ ah->ah_turbo) <= timeout)
+ return -EINVAL;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
+ ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+ return 0;
+}
+
+
+/****************\
+* BSSID handling *
+\****************/
+
+/**
+ * ath5k_hw_get_lladdr - Get station id
+ *
+ * @ah: The &struct ath5k_hw
+ * @mac: The card's mac address
+ *
+ * Initialize ah->ah_sta_id using the mac address provided
+ * (just a memcpy).
+ *
+ * TODO: Remove it once we merge ath5k_softc and ath5k_hw
+ */
+void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ memcpy(mac, ah->ah_sta_id, ETH_ALEN);
+}
+
+/**
+ * ath5k_hw_set_lladdr - Set station id
+ *
+ * @ah: The &struct ath5k_hw
+ * @mac: The card's mac address
+ *
+ * Set station id on hw using the provided mac address
+ */
+int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
+{
+ u32 low_id, high_id;
+ u32 pcu_reg;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /* Set new station ID */
+ memcpy(ah->ah_sta_id, mac, ETH_ALEN);
+
+ pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
+
+ low_id = AR5K_LOW_ID(mac);
+ high_id = AR5K_HIGH_ID(mac);
+
+ ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+ ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_associd - Set BSSID for association
+ *
+ * @ah: The &struct ath5k_hw
+ * @bssid: BSSID
+ * @assoc_id: Assoc id
+ *
+ * Sets the BSSID which trigers the "SME Join" operation
+ */
+void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
+{
+ u32 low_id, high_id;
+ u16 tim_offset = 0;
+
+ /*
+ * Set simple BSSID mask on 5212
+ */
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_bssid_mask),
+ AR5K_BSS_IDM0);
+ ath5k_hw_reg_write(ah, AR5K_HIGH_ID(ah->ah_bssid_mask),
+ AR5K_BSS_IDM1);
+ }
+
+ /*
+ * Set BSSID which triggers the "SME Join" operation
+ */
+ low_id = AR5K_LOW_ID(bssid);
+ high_id = AR5K_HIGH_ID(bssid);
+ ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
+ ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
+ AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
+
+ if (assoc_id == 0) {
+ ath5k_hw_disable_pspoll(ah);
+ return;
+ }
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
+ tim_offset ? tim_offset + 4 : 0);
+
+ ath5k_hw_enable_pspoll(ah, NULL, 0);
+}
+
+/**
+ * ath5k_hw_set_bssid_mask - filter out bssids we listen
+ *
+ * @ah: the &struct ath5k_hw
+ * @mask: the bssid_mask, a u8 array of size ETH_ALEN
+ *
+ * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode and AP mode with a single
+ * BSS every bit matters since we lock to only one BSS. In AP mode with
+ * multiple BSSes (virtual interfaces) not every bit matters because hw must
+ * accept frames for all BSSes and so we tweak some bits of our mac address
+ * in order to have multiple BSSes.
+ *
+ * NOTE: This is a simple filter and does *not* filter out all
+ * relevant frames. Some frames that are not for us might get ACKed from us
+ * by PCU because they just match the mask.
+ *
+ * When handling multiple BSSes you can get the BSSID mask by computing the
+ * set of ~ ( MAC XOR BSSID ) for all bssids we handle.
+ *
+ * When you do this you are essentially computing the common bits of all your
+ * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
+ * the MAC address to obtain the relevant bits and compare the result with
+ * (frame's BSSID & mask) to see if they match.
+ */
+/*
+ * Simple example: on your card you have have two BSSes you have created with
+ * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
+ * There is another BSSID-03 but you are not part of it. For simplicity's sake,
+ * assuming only 4 bits for a mac address and for BSSIDs you can then have:
+ *
+ * \
+ * MAC: 0001 |
+ * BSSID-01: 0100 | --> Belongs to us
+ * BSSID-02: 1001 |
+ * /
+ * -------------------
+ * BSSID-03: 0110 | --> External
+ * -------------------
+ *
+ * Our bssid_mask would then be:
+ *
+ * On loop iteration for BSSID-01:
+ * ~(0001 ^ 0100) -> ~(0101)
+ * -> 1010
+ * bssid_mask = 1010
+ *
+ * On loop iteration for BSSID-02:
+ * bssid_mask &= ~(0001 ^ 1001)
+ * bssid_mask = (1010) & ~(0001 ^ 1001)
+ * bssid_mask = (1010) & ~(1001)
+ * bssid_mask = (1010) & (0110)
+ * bssid_mask = 0010
+ *
+ * A bssid_mask of 0010 means "only pay attention to the second least
+ * significant bit". This is because its the only bit common
+ * amongst the MAC and all BSSIDs we support. To findout what the real
+ * common bit is we can simply "&" the bssid_mask now with any BSSID we have
+ * or our MAC address (we assume the hardware uses the MAC address).
+ *
+ * Now, suppose there's an incoming frame for BSSID-03:
+ *
+ * IFRAME-01: 0110
+ *
+ * An easy eye-inspeciton of this already should tell you that this frame
+ * will not pass our check. This is beacuse the bssid_mask tells the
+ * hardware to only look at the second least significant bit and the
+ * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
+ * as 1, which does not match 0.
+ *
+ * So with IFRAME-01 we *assume* the hardware will do:
+ *
+ * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
+ * --> allow = (0010) == 0000 ? 1 : 0;
+ * --> allow = 0
+ *
+ * Lets now test a frame that should work:
+ *
+ * IFRAME-02: 0001 (we should allow)
+ *
+ * allow = (0001 & 1010) == 1010
+ *
+ * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0;
+ * --> allow = (0010) == (0010)
+ * --> allow = 1
+ *
+ * Other examples:
+ *
+ * IFRAME-03: 0100 --> allowed
+ * IFRAME-04: 1001 --> allowed
+ * IFRAME-05: 1101 --> allowed but its not for us!!!
+ *
+ */
+int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+{
+ u32 low_id, high_id;
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Cache bssid mask so that we can restore it
+ * on reset */
+ memcpy(ah->ah_bssid_mask, mask, ETH_ALEN);
+ if (ah->ah_version == AR5K_AR5212) {
+ low_id = AR5K_LOW_ID(mask);
+ high_id = AR5K_HIGH_ID(mask);
+
+ ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
+ ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
+
+ return 0;
+ }
+
+ return -EIO;
+}
+
+
+/************\
+* RX Control *
+\************/
+
+/**
+ * ath5k_hw_start_rx_pcu - Start RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Starts RX engine on PCU so that hw can process RXed frames
+ * (ACK etc).
+ *
+ * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
+ * TODO: Init ANI here
+ */
+void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/**
+ * at5k_hw_stop_rx_pcu - Stop RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Stops RX engine on PCU
+ *
+ * TODO: Detach ANI here
+ */
+void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/*
+ * Set multicast filter
+ */
+void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ /* Set the multicat filter */
+ ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
+ ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
+}
+
+/*
+ * Set multicast filter by index
+ */
+int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
+{
+
+ ATH5K_TRACE(ah->ah_sc);
+ if (index >= 64)
+ return -EINVAL;
+ else if (index >= 32)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1,
+ (1 << (index - 32)));
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+ return 0;
+}
+
+/*
+ * Clear Multicast filter by index
+ */
+int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
+{
+
+ ATH5K_TRACE(ah->ah_sc);
+ if (index >= 64)
+ return -EINVAL;
+ else if (index >= 32)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1,
+ (1 << (index - 32)));
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_get_rx_filter - Get current rx filter
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the RX filter by reading rx filter and
+ * phy error filter registers. RX filter is used
+ * to set the allowed frame types that PCU will accept
+ * and pass to the driver. For a list of frame types
+ * check out reg.h.
+ */
+u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
+{
+ u32 data, filter = 0;
+
+ ATH5K_TRACE(ah->ah_sc);
+ filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER);
+
+ /*Radar detection for 5212*/
+ if (ah->ah_version == AR5K_AR5212) {
+ data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL);
+
+ if (data & AR5K_PHY_ERR_FIL_RADAR)
+ filter |= AR5K_RX_FILTER_RADARERR;
+ if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK))
+ filter |= AR5K_RX_FILTER_PHYERR;
+ }
+
+ return filter;
+}
+
+/**
+ * ath5k_hw_set_rx_filter - Set rx filter
+ *
+ * @ah: The &struct ath5k_hw
+ * @filter: RX filter mask (see reg.h)
+ *
+ * Sets RX filter register and also handles PHY error filter
+ * register on 5212 and newer chips so that we have proper PHY
+ * error reporting.
+ */
+void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
+{
+ u32 data = 0;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Set PHY error filter register on 5212*/
+ if (ah->ah_version == AR5K_AR5212) {
+ if (filter & AR5K_RX_FILTER_RADARERR)
+ data |= AR5K_PHY_ERR_FIL_RADAR;
+ if (filter & AR5K_RX_FILTER_PHYERR)
+ data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK;
+ }
+
+ /*
+ * The AR5210 uses promiscous mode to detect radar activity
+ */
+ if (ah->ah_version == AR5K_AR5210 &&
+ (filter & AR5K_RX_FILTER_RADARERR)) {
+ filter &= ~AR5K_RX_FILTER_RADARERR;
+ filter |= AR5K_RX_FILTER_PROM;
+ }
+
+ /*Zero length DMA (phy error reporting) */
+ if (data)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+
+ /*Write RX Filter register*/
+ ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER);
+
+ /*Write PHY error filter register on 5212*/
+ if (ah->ah_version == AR5K_AR5212)
+ ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL);
+
+}
+
+
+/****************\
+* Beacon control *
+\****************/
+
+/**
+ * ath5k_hw_get_tsf32 - Get a 32bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns lower 32 bits of current TSF
+ */
+u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ return ath5k_hw_reg_read(ah, AR5K_TSF_L32);
+}
+
+/**
+ * ath5k_hw_get_tsf64 - Get the full 64bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the current TSF
+ */
+u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
+{
+ u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+ ATH5K_TRACE(ah->ah_sc);
+
+ return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32);
+}
+
+/**
+ * ath5k_hw_set_tsf64 - Set a new 64bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ * @tsf64: The new 64bit TSF
+ *
+ * Sets the new TSF
+ */
+void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ ath5k_hw_reg_write(ah, tsf64 & 0xffffffff, AR5K_TSF_L32);
+ ath5k_hw_reg_write(ah, (tsf64 >> 32) & 0xffffffff, AR5K_TSF_U32);
+}
+
+/**
+ * ath5k_hw_reset_tsf - Force a TSF reset
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Forces a TSF reset on PCU
+ */
+void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
+{
+ u32 val;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF;
+
+ /*
+ * Each write to the RESET_TSF bit toggles a hardware internal
+ * signal to reset TSF, but if left high it will cause a TSF reset
+ * on the next chip reset as well. Thus we always write the value
+ * twice to clear the signal.
+ */
+ ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+ ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+}
+
+/*
+ * Initialize beacon timers
+ */
+void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
+{
+ u32 timer1, timer2, timer3;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /*
+ * Set the additional timers by mode
+ */
+ switch (ah->ah_op_mode) {
+ case NL80211_IFTYPE_MONITOR:
+ case NL80211_IFTYPE_STATION:
+ /* In STA mode timer1 is used as next wakeup
+ * timer and timer2 as next CFP duration start
+ * timer. Both in 1/8TUs. */
+ /* TODO: PCF handling */
+ if (ah->ah_version == AR5K_AR5210) {
+ timer1 = 0xffffffff;
+ timer2 = 0xffffffff;
+ } else {
+ timer1 = 0x0000ffff;
+ timer2 = 0x0007ffff;
+ }
+ /* Mark associated AP as PCF incapable for now */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PCF);
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_ADHOC_BCN_ATIM);
+ default:
+ /* On non-STA modes timer1 is used as next DMA
+ * beacon alert (DBA) timer and timer2 as next
+ * software beacon alert. Both in 1/8TUs. */
+ timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3;
+ timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3;
+ break;
+ }
+
+ /* Timer3 marks the end of our ATIM window
+ * a zero length window is not allowed because
+ * we 'll get no beacons */
+ timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1);
+
+ /*
+ * Set the beacon register and enable all timers.
+ */
+ /* When in AP mode zero timer0 to start TSF */
+ if (ah->ah_op_mode == NL80211_IFTYPE_AP)
+ ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
+
+ ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
+ ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
+ ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
+ ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
+
+ /* Force a TSF reset if requested and enable beacons */
+ if (interval & AR5K_BEACON_RESET_TSF)
+ ath5k_hw_reset_tsf(ah);
+
+ ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
+ AR5K_BEACON_ENABLE),
+ AR5K_BEACON);
+
+ /* Flush any pending BMISS interrupts on ISR by
+ * performing a clear-on-write operation on PISR
+ * register for the BMISS bit (writing a bit on
+ * ISR togles a reset for that bit and leaves
+ * the rest bits intact) */
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR);
+ else
+ ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR);
+
+ /* TODO: Set enchanced sleep registers on AR5212
+ * based on vif->bss_conf params, until then
+ * disable power save reporting.*/
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV);
+
+}
+
+#if 0
+/*
+ * Set beacon timers
+ */
+int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah,
+ const struct ath5k_beacon_state *state)
+{
+ u32 cfp_period, next_cfp, dtim, interval, next_beacon;
+
+ /*
+ * TODO: should be changed through *state
+ * review struct ath5k_beacon_state struct
+ *
+ * XXX: These are used for cfp period bellow, are they
+ * ok ? Is it O.K. for tsf here to be 0 or should we use
+ * get_tsf ?
+ */
+ u32 dtim_count = 0; /* XXX */
+ u32 cfp_count = 0; /* XXX */
+ u32 tsf = 0; /* XXX */
+
+ ATH5K_TRACE(ah->ah_sc);
+ /* Return on an invalid beacon state */
+ if (state->bs_interval < 1)
+ return -EINVAL;
+
+ interval = state->bs_interval;
+ dtim = state->bs_dtim_period;
+
+ /*
+ * PCF support?
+ */
+ if (state->bs_cfp_period > 0) {
+ /*
+ * Enable PCF mode and set the CFP
+ * (Contention Free Period) and timer registers
+ */
+ cfp_period = state->bs_cfp_period * state->bs_dtim_period *
+ state->bs_interval;
+ next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) *
+ state->bs_interval;
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_DEFAULT_ANTENNA |
+ AR5K_STA_ID1_PCF);
+ ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD);
+ ath5k_hw_reg_write(ah, state->bs_cfp_max_duration,
+ AR5K_CFP_DUR);
+ ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period :
+ next_cfp)) << 3, AR5K_TIMER2);
+ } else {
+ /* Disable PCF mode */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_DEFAULT_ANTENNA |
+ AR5K_STA_ID1_PCF);
+ }
+
+ /*
+ * Enable the beacon timer register
+ */
+ ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0);
+
+ /*
+ * Start the beacon timers
+ */
+ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &
+ ~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) |
+ AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0,
+ AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval,
+ AR5K_BEACON_PERIOD), AR5K_BEACON);
+
+ /*
+ * Write new beacon miss threshold, if it appears to be valid
+ * XXX: Figure out right values for min <= bs_bmiss_threshold <= max
+ * and return if its not in range. We can test this by reading value and
+ * setting value to a largest value and seeing which values register.
+ */
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS,
+ state->bs_bmiss_threshold);
+
+ /*
+ * Set sleep control register
+ * XXX: Didn't find this in 5210 code but since this register
+ * exists also in ar5k's 5210 headers i leave it as common code.
+ */
+ AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR,
+ (state->bs_sleep_duration - 3) << 3);
+
+ /*
+ * Set enhanced sleep registers on 5212
+ */
+ if (ah->ah_version == AR5K_AR5212) {
+ if (state->bs_sleep_duration > state->bs_interval &&
+ roundup(state->bs_sleep_duration, interval) ==
+ state->bs_sleep_duration)
+ interval = state->bs_sleep_duration;
+
+ if (state->bs_sleep_duration > dtim && (dtim == 0 ||
+ roundup(state->bs_sleep_duration, dtim) ==
+ state->bs_sleep_duration))
+ dtim = state->bs_sleep_duration;
+
+ if (interval > dtim)
+ return -EINVAL;
+
+ next_beacon = interval == dtim ? state->bs_next_dtim :
+ state->bs_next_beacon;
+
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM((state->bs_next_dtim - 3) << 3,
+ AR5K_SLEEP0_NEXT_DTIM) |
+ AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) |
+ AR5K_SLEEP0_ENH_SLEEP_EN |
+ AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0);
+
+ ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3,
+ AR5K_SLEEP1_NEXT_TIM) |
+ AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1);
+
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) |
+ AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2);
+ }
+
+ return 0;
+}
+
+/*
+ * Reset beacon timers
+ */
+void ath5k_hw_reset_beacon(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ /*
+ * Disable beacon timer
+ */
+ ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
+
+ /*
+ * Disable some beacon register values
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF);
+ ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON);
+}
+
+/*
+ * Wait for beacon queue to finish
+ */
+int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr)
+{
+ unsigned int i;
+ int ret;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* 5210 doesn't have QCU*/
+ if (ah->ah_version == AR5K_AR5210) {
+ /*
+ * Wait for beaconn queue to finish by checking
+ * Control Register and Beacon Status Register.
+ */
+ for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) {
+ if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F)
+ ||
+ !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F))
+ break;
+ udelay(10);
+ }
+
+ /* Timeout... */
+ if (i <= 0) {
+ /*
+ * Re-schedule the beacon queue
+ */
+ ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1);
+ ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+ AR5K_BCR);
+
+ return -EIO;
+ }
+ ret = 0;
+ } else {
+ /*5211/5212*/
+ ret = ath5k_hw_register_timeout(ah,
+ AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON),
+ AR5K_QCU_STS_FRMPENDCNT, 0, false);
+
+ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON))
+ return -EIO;
+ }
+
+ return ret;
+}
+#endif
+
+
+/*********************\
+* Key table functions *
+\*********************/
+
+/*
+ * Reset a key entry on the table
+ */
+int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
+{
+ unsigned int i, type;
+ u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET;
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+ type = ath5k_hw_reg_read(ah, AR5K_KEYTABLE_TYPE(entry));
+
+ for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
+ ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
+
+ /* Reset associated MIC entry if TKIP
+ * is enabled located at offset (entry + 64) */
+ if (type == AR5K_KEYTABLE_TYPE_TKIP) {
+ AR5K_ASSERT_ENTRY(micentry, AR5K_KEYTABLE_SIZE);
+ for (i = 0; i < AR5K_KEYCACHE_SIZE / 2 ; i++)
+ ath5k_hw_reg_write(ah, 0,
+ AR5K_KEYTABLE_OFF(micentry, i));
+ }
+
+ /*
+ * Set NULL encryption on AR5212+
+ *
+ * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5)
+ * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007
+ *
+ * Note2: Windows driver (ndiswrapper) sets this to
+ * 0x00000714 instead of 0x00000007
+ */
+ if (ah->ah_version >= AR5K_AR5211) {
+ ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
+ AR5K_KEYTABLE_TYPE(entry));
+
+ if (type == AR5K_KEYTABLE_TYPE_TKIP) {
+ ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
+ AR5K_KEYTABLE_TYPE(micentry));
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Check if a table entry is valid
+ */
+int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+ /* Check the validation flag at the end of the entry */
+ return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) &
+ AR5K_KEYTABLE_VALID;
+}
+
+static
+int ath5k_keycache_type(const struct ieee80211_key_conf *key)
+{
+ switch (key->alg) {
+ case ALG_TKIP:
+ return AR5K_KEYTABLE_TYPE_TKIP;
+ case ALG_CCMP:
+ return AR5K_KEYTABLE_TYPE_CCM;
+ case ALG_WEP:
+ if (key->keylen == WLAN_KEY_LEN_WEP40)
+ return AR5K_KEYTABLE_TYPE_40;
+ else if (key->keylen == WLAN_KEY_LEN_WEP104)
+ return AR5K_KEYTABLE_TYPE_104;
+ return -EINVAL;
+ default:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+/*
+ * Set a key entry on the table
+ */
+int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
+ const struct ieee80211_key_conf *key, const u8 *mac)
+{
+ unsigned int i;
+ int keylen;
+ __le32 key_v[5] = {};
+ __le32 key0 = 0, key1 = 0;
+ __le32 *rxmic, *txmic;
+ int keytype;
+ u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET;
+ bool is_tkip;
+ const u8 *key_ptr;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ is_tkip = (key->alg == ALG_TKIP);
+
+ /*
+ * key->keylen comes in from mac80211 in bytes.
+ * TKIP is 128 bit + 128 bit mic
+ */
+ keylen = (is_tkip) ? (128 / 8) : key->keylen;
+
+ if (entry > AR5K_KEYTABLE_SIZE ||
+ (is_tkip && micentry > AR5K_KEYTABLE_SIZE))
+ return -EOPNOTSUPP;
+
+ if (unlikely(keylen > 16))
+ return -EOPNOTSUPP;
+
+ keytype = ath5k_keycache_type(key);
+ if (keytype < 0)
+ return keytype;
+
+ /*
+ * each key block is 6 bytes wide, written as pairs of
+ * alternating 32 and 16 bit le values.
+ */
+ key_ptr = key->key;
+ for (i = 0; keylen >= 6; keylen -= 6) {
+ memcpy(&key_v[i], key_ptr, 6);
+ i += 2;
+ key_ptr += 6;
+ }
+ if (keylen)
+ memcpy(&key_v[i], key_ptr, keylen);
+
+ /* intentionally corrupt key until mic is installed */
+ if (is_tkip) {
+ key0 = key_v[0] = ~key_v[0];
+ key1 = key_v[1] = ~key_v[1];
+ }
+
+ for (i = 0; i < ARRAY_SIZE(key_v); i++)
+ ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
+ AR5K_KEYTABLE_OFF(entry, i));
+
+ ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry));
+
+ if (is_tkip) {
+ /* Install rx/tx MIC */
+ rxmic = (__le32 *) &key->key[16];
+ txmic = (__le32 *) &key->key[24];
+
+ if (ah->ah_combined_mic) {
+ key_v[0] = rxmic[0];
+ key_v[1] = cpu_to_le32(le32_to_cpu(txmic[0]) >> 16);
+ key_v[2] = rxmic[1];
+ key_v[3] = cpu_to_le32(le32_to_cpu(txmic[0]) & 0xffff);
+ key_v[4] = txmic[1];
+ } else {
+ key_v[0] = rxmic[0];
+ key_v[1] = 0;
+ key_v[2] = rxmic[1];
+ key_v[3] = 0;
+ key_v[4] = 0;
+ }
+ for (i = 0; i < ARRAY_SIZE(key_v); i++)
+ ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
+ AR5K_KEYTABLE_OFF(micentry, i));
+
+ ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
+ AR5K_KEYTABLE_TYPE(micentry));
+ ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC0(micentry));
+ ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC1(micentry));
+
+ /* restore first 2 words of key */
+ ath5k_hw_reg_write(ah, le32_to_cpu(~key0),
+ AR5K_KEYTABLE_OFF(entry, 0));
+ ath5k_hw_reg_write(ah, le32_to_cpu(~key1),
+ AR5K_KEYTABLE_OFF(entry, 1));
+ }
+
+ return ath5k_hw_set_key_lladdr(ah, entry, mac);
+}
+
+int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac)
+{
+ u32 low_id, high_id;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /* Invalid entry (key table overflow) */
+ AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+ /* MAC may be NULL if it's a broadcast key. In this case no need to
+ * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
+ if (!mac) {
+ low_id = 0xffffffff;
+ high_id = 0xffff | AR5K_KEYTABLE_VALID;
+ } else {
+ low_id = AR5K_LOW_ID(mac);
+ high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
+ }
+
+ ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
+ ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry));
+
+ return 0;
+}
+