diff options
Diffstat (limited to 'drivers/net/wireless/ath9k/main.c')
| -rw-r--r-- | drivers/net/wireless/ath9k/main.c | 94 |
1 files changed, 9 insertions, 85 deletions
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index b25c8f9670d..b1b1e7f3b0b 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -21,8 +21,6 @@ #define ATH_PCI_VERSION "0.1" -#define IEEE80211_HTCAP_MAXRXAMPDU_FACTOR 13 - static char *dev_info = "ath9k"; MODULE_AUTHOR("Atheros Communications"); @@ -297,41 +295,6 @@ static void ath9k_rx_prepare(struct ath_softc *sc, rx_status->flag |= RX_FLAG_TSFT; } -static u8 parse_mpdudensity(u8 mpdudensity) -{ - /* - * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": - * 0 for no restriction - * 1 for 1/4 us - * 2 for 1/2 us - * 3 for 1 us - * 4 for 2 us - * 5 for 4 us - * 6 for 8 us - * 7 for 16 us - */ - switch (mpdudensity) { - case 0: - return 0; - case 1: - case 2: - case 3: - /* Our lower layer calculations limit our precision to - 1 microsecond */ - return 1; - case 4: - return 2; - case 5: - return 4; - case 6: - return 8; - case 7: - return 16; - default: - return 0; - } -} - static void ath9k_ht_conf(struct ath_softc *sc, struct ieee80211_bss_conf *bss_conf) { @@ -479,8 +442,6 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, tx_info->status.rates[0].count = tx_status->retries + 1; ieee80211_tx_status(hw, skb); - if (an) - ath_node_put(sc, an, ATH9K_BH_STATUS_CHANGE); } int _ath_rx_indicate(struct ath_softc *sc, @@ -518,10 +479,6 @@ int _ath_rx_indicate(struct ath_softc *sc, rx_status.flag |= RX_FLAG_DECRYPTED; } - spin_lock_bh(&sc->node_lock); - an = ath_node_find(sc, hdr->addr2); - spin_unlock_bh(&sc->node_lock); - if (an) { ath_rx_input(sc, an, skb, status, &st); @@ -913,11 +870,6 @@ static int ath_attach(u16 devid, if (error != 0) return error; - /* Init nodes */ - - INIT_LIST_HEAD(&sc->node_list); - spin_lock_init(&sc->node_lock); - /* get mac address from hardware and set in mac80211 */ SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr); @@ -1404,50 +1356,22 @@ static void ath9k_configure_filter(struct ieee80211_hw *hw, __func__, sc->rx_filter); } +/* Only a single interface is currently supported, + so pass 0 as the interface id to ath_node_attach */ + static void ath9k_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd cmd, struct ieee80211_sta *sta) { struct ath_softc *sc = hw->priv; - struct ath_node *an; - unsigned long flags; - - spin_lock_irqsave(&sc->node_lock, flags); - an = ath_node_find(sc, sta->addr); - spin_unlock_irqrestore(&sc->node_lock, flags); switch (cmd) { case STA_NOTIFY_ADD: - spin_lock_irqsave(&sc->node_lock, flags); - if (!an) { - ath_node_attach(sc, sta->addr, 0); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a node: %pM\n", - __func__, sta->addr); - } else { - ath_node_get(sc, sta->addr); - } - - /* XXX: Is this right? Can the capabilities change? */ - an = ath_node_find(sc, sta->addr); - an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + - sta->ht_cap.ampdu_factor); - an->mpdudensity = - parse_mpdudensity(sta->ht_cap.ampdu_density); - - spin_unlock_irqrestore(&sc->node_lock, flags); + ath_node_attach(sc, sta, 0); break; case STA_NOTIFY_REMOVE: - if (!an) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Removal of a non-existent node\n", - __func__); - else { - ath_node_put(sc, an, ATH9K_BH_STATUS_INTACT); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Put a node: %pM\n", - __func__, - sta->addr); - } + ath_node_detach(sc, sta); break; default: break; @@ -1595,21 +1519,21 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, switch (action) { case IEEE80211_AMPDU_RX_START: - ret = ath_rx_aggr_start(sc, sta->addr, tid, ssn); + ret = ath_rx_aggr_start(sc, sta, tid, ssn); if (ret < 0) DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to start RX aggregation\n", __func__); break; case IEEE80211_AMPDU_RX_STOP: - ret = ath_rx_aggr_stop(sc, sta->addr, tid); + ret = ath_rx_aggr_stop(sc, sta, tid); if (ret < 0) DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to stop RX aggregation\n", __func__); break; case IEEE80211_AMPDU_TX_START: - ret = ath_tx_aggr_start(sc, sta->addr, tid, ssn); + ret = ath_tx_aggr_start(sc, sta, tid, ssn); if (ret < 0) DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to start TX aggregation\n", @@ -1618,7 +1542,7 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid); break; case IEEE80211_AMPDU_TX_STOP: - ret = ath_tx_aggr_stop(sc, sta->addr, tid); + ret = ath_tx_aggr_stop(sc, sta, tid); if (ret < 0) DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to stop TX aggregation\n", |