aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath9k/rc.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath9k/rc.h')
-rw-r--r--drivers/net/wireless/ath9k/rc.h316
1 files changed, 316 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h
new file mode 100644
index 00000000000..8f6c28e6519
--- /dev/null
+++ b/drivers/net/wireless/ath9k/rc.h
@@ -0,0 +1,316 @@
+/*
+ * Copyright (c) 2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004 Video54 Technologies, Inc.
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef RC_H
+#define RC_H
+
+#include "ath9k.h"
+/*
+ * Interface definitions for transmit rate control modules for the
+ * Atheros driver.
+ *
+ * A rate control module is responsible for choosing the transmit rate
+ * for each data frame. Management+control frames are always sent at
+ * a fixed rate.
+ *
+ * Only one module may be present at a time; the driver references
+ * rate control interfaces by symbol name. If multiple modules are
+ * to be supported we'll need to switch to a registration-based scheme
+ * as is currently done, for example, for authentication modules.
+ *
+ * An instance of the rate control module is attached to each device
+ * at attach time and detached when the device is destroyed. The module
+ * may associate data with each device and each node (station). Both
+ * sets of storage are opaque except for the size of the per-node storage
+ * which must be provided when the module is attached.
+ *
+ * The rate control module is notified for each state transition and
+ * station association/reassociation. Otherwise it is queried for a
+ * rate for each outgoing frame and provided status from each transmitted
+ * frame. Any ancillary processing is the responsibility of the module
+ * (e.g. if periodic processing is required then the module should setup
+ * it's own timer).
+ *
+ * In addition to the transmit rate for each frame the module must also
+ * indicate the number of attempts to make at the specified rate. If this
+ * number is != ATH_TXMAXTRY then an additional callback is made to setup
+ * additional transmit state. The rate control code is assumed to write
+ * this additional data directly to the transmit descriptor.
+ */
+
+struct ath_softc;
+
+#define TRUE 1
+#define FALSE 0
+
+#define ATH_RATE_MAX 30
+#define MCS_SET_SIZE 128
+
+enum ieee80211_fixed_rate_mode {
+ IEEE80211_FIXED_RATE_NONE = 0,
+ IEEE80211_FIXED_RATE_MCS = 1 /* HT rates */
+};
+
+/*
+ * Use the hal os glue code to get ms time
+ */
+#define IEEE80211_RATE_IDX_ENTRY(val, idx) (((val&(0xff<<(idx*8)))>>(idx*8)))
+
+#define SHORT_PRE 1
+#define LONG_PRE 0
+
+#define WLAN_PHY_HT_20_SS WLAN_RC_PHY_HT_20_SS
+#define WLAN_PHY_HT_20_DS WLAN_RC_PHY_HT_20_DS
+#define WLAN_PHY_HT_20_DS_HGI WLAN_RC_PHY_HT_20_DS_HGI
+#define WLAN_PHY_HT_40_SS WLAN_RC_PHY_HT_40_SS
+#define WLAN_PHY_HT_40_SS_HGI WLAN_RC_PHY_HT_40_SS_HGI
+#define WLAN_PHY_HT_40_DS WLAN_RC_PHY_HT_40_DS
+#define WLAN_PHY_HT_40_DS_HGI WLAN_RC_PHY_HT_40_DS_HGI
+
+#define WLAN_PHY_OFDM PHY_OFDM
+#define WLAN_PHY_CCK PHY_CCK
+
+#define TRUE_20 0x2
+#define TRUE_40 0x4
+#define TRUE_2040 (TRUE_20|TRUE_40)
+#define TRUE_ALL (TRUE_2040|TRUE)
+
+enum {
+ WLAN_RC_PHY_HT_20_SS = 4,
+ WLAN_RC_PHY_HT_20_DS,
+ WLAN_RC_PHY_HT_40_SS,
+ WLAN_RC_PHY_HT_40_DS,
+ WLAN_RC_PHY_HT_20_SS_HGI,
+ WLAN_RC_PHY_HT_20_DS_HGI,
+ WLAN_RC_PHY_HT_40_SS_HGI,
+ WLAN_RC_PHY_HT_40_DS_HGI,
+ WLAN_RC_PHY_MAX
+};
+
+#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \
+ || (_phy == WLAN_RC_PHY_HT_40_DS) \
+ || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \
+ || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+#define WLAN_RC_PHY_40(_phy) ((_phy == WLAN_RC_PHY_HT_40_SS) \
+ || (_phy == WLAN_RC_PHY_HT_40_DS) \
+ || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \
+ || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+#define WLAN_RC_PHY_SGI(_phy) ((_phy == WLAN_RC_PHY_HT_20_SS_HGI) \
+ || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \
+ || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \
+ || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+
+#define WLAN_RC_PHY_HT(_phy) (_phy >= WLAN_RC_PHY_HT_20_SS)
+
+/* Returns the capflag mode */
+#define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ? \
+ (capflag & WLAN_RC_40_FLAG) ? TRUE_40 : TRUE_20 : TRUE))
+
+/* Return TRUE if flag supports HT20 && client supports HT20 or
+ * return TRUE if flag supports HT40 && client supports HT40.
+ * This is used becos some rates overlap between HT20/HT40.
+ */
+
+#define WLAN_RC_PHY_HT_VALID(flag, capflag) (((flag & TRUE_20) && !(capflag \
+ & WLAN_RC_40_FLAG)) || ((flag & TRUE_40) && \
+ (capflag & WLAN_RC_40_FLAG)))
+
+#define WLAN_RC_DS_FLAG (0x01)
+#define WLAN_RC_40_FLAG (0x02)
+#define WLAN_RC_SGI_FLAG (0x04)
+#define WLAN_RC_HT_FLAG (0x08)
+
+/* Index into the rate table */
+#define INIT_RATE_MAX_20 23
+#define INIT_RATE_MAX_40 40
+
+#define RATE_TABLE_SIZE 64
+
+/* XXX: Convert to kdoc */
+struct ath_rate_table {
+ int rate_cnt;
+ struct {
+ int valid; /* Valid for use in rate control */
+ int valid_single_stream;/* Valid for use in rate control
+ for single stream operation */
+ u8 phy; /* CCK/OFDM/TURBO/XR */
+ u32 ratekbps; /* Rate in Kbits per second */
+ u32 user_ratekbps; /* User rate in KBits per second */
+ u8 ratecode; /* rate that goes into
+ hw descriptors */
+ u8 short_preamble; /* Mask for enabling short preamble
+ in rate code for CCK */
+ u8 dot11rate; /* Value that goes into supported
+ rates info element of MLME */
+ u8 ctrl_rate; /* Index of next lower basic rate,
+ used for duration computation */
+ int8_t rssi_ack_validmin; /* Rate control related */
+ int8_t rssi_ack_deltamin; /* Rate control related */
+ u8 base_index; /* base rate index */
+ u8 cw40index; /* 40cap rate index */
+ u8 sgi_index; /* shortgi rate index */
+ u8 ht_index; /* shortgi rate index */
+ u32 max_4ms_framelen; /* Maximum frame length(bytes)
+ for 4ms tx duration */
+ } info[RATE_TABLE_SIZE];
+ u32 probe_interval; /* interval for ratectrl to
+ probe for other rates */
+ u32 rssi_reduce_interval; /* interval for ratectrl
+ to reduce RSSI */
+ u8 initial_ratemax; /* the initial ratemax value used
+ in ath_rc_sib_update() */
+};
+
+#define ATH_RC_PROBE_ALLOWED 0x00000001
+#define ATH_RC_MINRATE_LASTRATE 0x00000002
+#define ATH_RC_SHORT_PREAMBLE 0x00000004
+
+struct ath_rc_series {
+ u8 rix;
+ u8 tries;
+ u8 flags;
+ u32 max_4ms_framelen;
+};
+
+/* rcs_flags definition */
+#define ATH_RC_DS_FLAG 0x01
+#define ATH_RC_CW40_FLAG 0x02 /* CW 40 */
+#define ATH_RC_SGI_FLAG 0x04 /* Short Guard Interval */
+#define ATH_RC_HT_FLAG 0x08 /* HT */
+#define ATH_RC_RTSCTS_FLAG 0x10 /* RTS-CTS */
+
+/*
+ * State structures for new rate adaptation code
+ */
+#define MAX_TX_RATE_TBL 64
+#define MAX_TX_RATE_PHY 48
+
+struct ath_tx_ratectrl_state {
+ int8_t rssi_thres; /* required rssi for this rate (dB) */
+ u8 per; /* recent estimate of packet error rate (%) */
+};
+
+struct ath_tx_ratectrl {
+ struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; /* state */
+ int8_t rssi_last; /* last ack rssi */
+ int8_t rssi_last_lookup; /* last ack rssi used for lookup */
+ int8_t rssi_last_prev; /* previous last ack rssi */
+ int8_t rssi_last_prev2; /* 2nd previous last ack rssi */
+ int32_t rssi_sum_cnt; /* count of rssi_sum for averaging */
+ int32_t rssi_sum_rate; /* rate that we are averaging */
+ int32_t rssi_sum; /* running sum of rssi for averaging */
+ u32 valid_txrate_mask; /* mask of valid rates */
+ u8 rate_table_size; /* rate table size */
+ u8 rate_max; /* max rate that has recently worked */
+ u8 probe_rate; /* rate we are probing at */
+ u32 rssi_time; /* msec timestamp for last ack rssi */
+ u32 rssi_down_time; /* msec timestamp for last down step */
+ u32 probe_time; /* msec timestamp for last probe */
+ u8 hw_maxretry_pktcnt; /* num packets since we got
+ HW max retry error */
+ u8 max_valid_rate; /* maximum number of valid rate */
+ u8 valid_rate_index[MAX_TX_RATE_TBL]; /* valid rate index */
+ u32 per_down_time; /* msec timstamp for last
+ PER down step */
+
+ /* 11n state */
+ u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX]; /* valid rate count */
+ u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL];
+ u8 rc_phy_mode;
+ u8 rate_max_phy; /* Phy index for the max rate */
+ u32 rate_max_lastused; /* msec timstamp of when we
+ last used rateMaxPhy */
+ u32 probe_interval; /* interval for ratectrl to probe
+ for other rates */
+};
+
+struct ath_rateset {
+ u8 rs_nrates;
+ u8 rs_rates[ATH_RATE_MAX];
+};
+
+/* per-device state */
+struct ath_rate_softc {
+ /* phy tables that contain rate control data */
+ const void *hw_rate_table[WIRELESS_MODE_MAX];
+ int fixedrix; /* -1 or index of fixed rate */
+};
+
+/* per-node state */
+struct ath_rate_node {
+ struct ath_tx_ratectrl tx_ratectrl; /* rate control state proper */
+ u32 prev_data_rix; /* rate idx of last data frame */
+
+ /* map of rate ix -> negotiated rate set ix */
+ u8 rixmap[MAX_TX_RATE_TBL];
+
+ /* map of ht rate ix -> negotiated rate set ix */
+ u8 ht_rixmap[MAX_TX_RATE_TBL];
+
+ u8 ht_cap; /* ht capabilities */
+ u8 ant_tx; /* current transmit antenna */
+
+ u8 single_stream; /* When TRUE, only single
+ stream Tx possible */
+ struct ath_rateset neg_rates; /* Negotiated rates */
+ struct ath_rateset neg_ht_rates; /* Negotiated HT rates */
+ struct ath_rate_softc *asc; /* back pointer to atheros softc */
+ struct ath_vap *avp; /* back pointer to vap */
+};
+
+/* Driver data of ieee80211_tx_info */
+struct ath_tx_info_priv {
+ struct ath_rc_series rcs[4];
+ struct ath_tx_status tx;
+ int n_frames;
+ int n_bad_frames;
+ u8 min_rate;
+};
+
+/*
+ * Attach/detach a rate control module.
+ */
+struct ath_rate_softc *ath_rate_attach(struct ath_hal *ah);
+void ath_rate_detach(struct ath_rate_softc *asc);
+
+/*
+ * Update/reset rate control state for 802.11 state transitions.
+ * Important mostly as the analog to ath_rate_newassoc when operating
+ * in station mode.
+ */
+void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv);
+void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp);
+
+/*
+ * Return the tx rate series.
+ */
+void ath_rate_findrate(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv,
+ int num_tries, int num_rates,
+ unsigned int rcflag, struct ath_rc_series[],
+ int *is_probe, int isretry);
+/*
+ * Return rate index for given Dot11 Rate.
+ */
+u8 ath_rate_findrateix(struct ath_softc *sc,
+ u8 dot11_rate);
+
+/* Routines to register/unregister rate control algorithm */
+int ath_rate_control_register(void);
+void ath_rate_control_unregister(void);
+
+#endif /* RC_H */