aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/hermes.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/hermes.h')
-rw-r--r--drivers/net/wireless/hermes.h481
1 files changed, 481 insertions, 0 deletions
diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h
new file mode 100644
index 00000000000..8c9e874c911
--- /dev/null
+++ b/drivers/net/wireless/hermes.h
@@ -0,0 +1,481 @@
+/* hermes.h
+ *
+ * Driver core for the "Hermes" wireless MAC controller, as used in
+ * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
+ * work on the hfa3841 and hfa3842 MAC controller chips used in the
+ * Prism I & II chipsets.
+ *
+ * This is not a complete driver, just low-level access routines for
+ * the MAC controller itself.
+ *
+ * Based on the prism2 driver from Absolute Value Systems' linux-wlan
+ * project, the Linux wvlan_cs driver, Lucent's HCF-Light
+ * (wvlan_hcf.c) library, and the NetBSD wireless driver.
+ *
+ * Copyright (C) 2000, David Gibson, Linuxcare Australia.
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
+ *
+ * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
+ *
+ * This file distributed under the GPL, version 2.
+ */
+
+#ifndef _HERMES_H
+#define _HERMES_H
+
+/* Notes on locking:
+ *
+ * As a module of low level hardware access routines, there is no
+ * locking. Users of this module should ensure that they serialize
+ * access to the hermes_t structure, and to the hardware
+*/
+
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <asm/byteorder.h>
+
+/*
+ * Limits and constants
+ */
+#define HERMES_ALLOC_LEN_MIN (4)
+#define HERMES_ALLOC_LEN_MAX (2400)
+#define HERMES_LTV_LEN_MAX (34)
+#define HERMES_BAP_DATALEN_MAX (4096)
+#define HERMES_BAP_OFFSET_MAX (4096)
+#define HERMES_PORTID_MAX (7)
+#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX+1)
+#define HERMES_PDR_LEN_MAX (260) /* in bytes, from EK */
+#define HERMES_PDA_RECS_MAX (200) /* a guess */
+#define HERMES_PDA_LEN_MAX (1024) /* in bytes, from EK */
+#define HERMES_SCANRESULT_MAX (35)
+#define HERMES_CHINFORESULT_MAX (8)
+#define HERMES_MAX_MULTICAST (16)
+#define HERMES_MAGIC (0x7d1f)
+
+/*
+ * Hermes register offsets
+ */
+#define HERMES_CMD (0x00)
+#define HERMES_PARAM0 (0x02)
+#define HERMES_PARAM1 (0x04)
+#define HERMES_PARAM2 (0x06)
+#define HERMES_STATUS (0x08)
+#define HERMES_RESP0 (0x0A)
+#define HERMES_RESP1 (0x0C)
+#define HERMES_RESP2 (0x0E)
+#define HERMES_INFOFID (0x10)
+#define HERMES_RXFID (0x20)
+#define HERMES_ALLOCFID (0x22)
+#define HERMES_TXCOMPLFID (0x24)
+#define HERMES_SELECT0 (0x18)
+#define HERMES_OFFSET0 (0x1C)
+#define HERMES_DATA0 (0x36)
+#define HERMES_SELECT1 (0x1A)
+#define HERMES_OFFSET1 (0x1E)
+#define HERMES_DATA1 (0x38)
+#define HERMES_EVSTAT (0x30)
+#define HERMES_INTEN (0x32)
+#define HERMES_EVACK (0x34)
+#define HERMES_CONTROL (0x14)
+#define HERMES_SWSUPPORT0 (0x28)
+#define HERMES_SWSUPPORT1 (0x2A)
+#define HERMES_SWSUPPORT2 (0x2C)
+#define HERMES_AUXPAGE (0x3A)
+#define HERMES_AUXOFFSET (0x3C)
+#define HERMES_AUXDATA (0x3E)
+
+/*
+ * CMD register bitmasks
+ */
+#define HERMES_CMD_BUSY (0x8000)
+#define HERMES_CMD_AINFO (0x7f00)
+#define HERMES_CMD_MACPORT (0x0700)
+#define HERMES_CMD_RECL (0x0100)
+#define HERMES_CMD_WRITE (0x0100)
+#define HERMES_CMD_PROGMODE (0x0300)
+#define HERMES_CMD_CMDCODE (0x003f)
+
+/*
+ * STATUS register bitmasks
+ */
+#define HERMES_STATUS_RESULT (0x7f00)
+#define HERMES_STATUS_CMDCODE (0x003f)
+
+/*
+ * OFFSET register bitmasks
+ */
+#define HERMES_OFFSET_BUSY (0x8000)
+#define HERMES_OFFSET_ERR (0x4000)
+#define HERMES_OFFSET_DATAOFF (0x0ffe)
+
+/*
+ * Event register bitmasks (INTEN, EVSTAT, EVACK)
+ */
+#define HERMES_EV_TICK (0x8000)
+#define HERMES_EV_WTERR (0x4000)
+#define HERMES_EV_INFDROP (0x2000)
+#define HERMES_EV_INFO (0x0080)
+#define HERMES_EV_DTIM (0x0020)
+#define HERMES_EV_CMD (0x0010)
+#define HERMES_EV_ALLOC (0x0008)
+#define HERMES_EV_TXEXC (0x0004)
+#define HERMES_EV_TX (0x0002)
+#define HERMES_EV_RX (0x0001)
+
+/*
+ * Command codes
+ */
+/*--- Controller Commands ----------------------------*/
+#define HERMES_CMD_INIT (0x0000)
+#define HERMES_CMD_ENABLE (0x0001)
+#define HERMES_CMD_DISABLE (0x0002)
+#define HERMES_CMD_DIAG (0x0003)
+
+/*--- Buffer Mgmt Commands ---------------------------*/
+#define HERMES_CMD_ALLOC (0x000A)
+#define HERMES_CMD_TX (0x000B)
+
+/*--- Regulate Commands ------------------------------*/
+#define HERMES_CMD_NOTIFY (0x0010)
+#define HERMES_CMD_INQUIRE (0x0011)
+
+/*--- Configure Commands -----------------------------*/
+#define HERMES_CMD_ACCESS (0x0021)
+#define HERMES_CMD_DOWNLD (0x0022)
+
+/*--- Serial I/O Commands ----------------------------*/
+#define HERMES_CMD_READMIF (0x0030)
+#define HERMES_CMD_WRITEMIF (0x0031)
+
+/*--- Debugging Commands -----------------------------*/
+#define HERMES_CMD_TEST (0x0038)
+
+
+/* Test command arguments */
+#define HERMES_TEST_SET_CHANNEL 0x0800
+#define HERMES_TEST_MONITOR 0x0b00
+#define HERMES_TEST_STOP 0x0f00
+
+/* Authentication algorithms */
+#define HERMES_AUTH_OPEN 1
+#define HERMES_AUTH_SHARED_KEY 2
+
+/* WEP settings */
+#define HERMES_WEP_PRIVACY_INVOKED 0x0001
+#define HERMES_WEP_EXCL_UNENCRYPTED 0x0002
+#define HERMES_WEP_HOST_ENCRYPT 0x0010
+#define HERMES_WEP_HOST_DECRYPT 0x0080
+
+/* Symbol hostscan options */
+#define HERMES_HOSTSCAN_SYMBOL_5SEC 0x0001
+#define HERMES_HOSTSCAN_SYMBOL_ONCE 0x0002
+#define HERMES_HOSTSCAN_SYMBOL_PASSIVE 0x0040
+#define HERMES_HOSTSCAN_SYMBOL_BCAST 0x0080
+
+/*
+ * Frame structures and constants
+ */
+
+#define HERMES_DESCRIPTOR_OFFSET 0
+#define HERMES_802_11_OFFSET (14)
+#define HERMES_802_3_OFFSET (14+32)
+#define HERMES_802_2_OFFSET (14+32+14)
+
+#define HERMES_RXSTAT_ERR (0x0003)
+#define HERMES_RXSTAT_BADCRC (0x0001)
+#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002)
+#define HERMES_RXSTAT_MACPORT (0x0700)
+#define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */
+#define HERMES_RXSTAT_MSGTYPE (0xE000)
+#define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */
+#define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */
+#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */
+
+struct hermes_tx_descriptor {
+ u16 status;
+ u16 reserved1;
+ u16 reserved2;
+ u32 sw_support;
+ u8 retry_count;
+ u8 tx_rate;
+ u16 tx_control;
+} __attribute__ ((packed));
+
+#define HERMES_TXSTAT_RETRYERR (0x0001)
+#define HERMES_TXSTAT_AGEDERR (0x0002)
+#define HERMES_TXSTAT_DISCON (0x0004)
+#define HERMES_TXSTAT_FORMERR (0x0008)
+
+#define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */
+#define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */
+#define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */
+#define HERMES_TXCTRL_ALT_RTRY (0x0020)
+
+/* Inquiry constants and data types */
+
+#define HERMES_INQ_TALLIES (0xF100)
+#define HERMES_INQ_SCAN (0xF101)
+#define HERMES_INQ_CHANNELINFO (0xF102)
+#define HERMES_INQ_HOSTSCAN (0xF103)
+#define HERMES_INQ_HOSTSCAN_SYMBOL (0xF104)
+#define HERMES_INQ_LINKSTATUS (0xF200)
+#define HERMES_INQ_SEC_STAT_AGERE (0xF202)
+
+struct hermes_tallies_frame {
+ u16 TxUnicastFrames;
+ u16 TxMulticastFrames;
+ u16 TxFragments;
+ u16 TxUnicastOctets;
+ u16 TxMulticastOctets;
+ u16 TxDeferredTransmissions;
+ u16 TxSingleRetryFrames;
+ u16 TxMultipleRetryFrames;
+ u16 TxRetryLimitExceeded;
+ u16 TxDiscards;
+ u16 RxUnicastFrames;
+ u16 RxMulticastFrames;
+ u16 RxFragments;
+ u16 RxUnicastOctets;
+ u16 RxMulticastOctets;
+ u16 RxFCSErrors;
+ u16 RxDiscards_NoBuffer;
+ u16 TxDiscardsWrongSA;
+ u16 RxWEPUndecryptable;
+ u16 RxMsgInMsgFragments;
+ u16 RxMsgInBadMsgFragments;
+ /* Those last are probably not available in very old firmwares */
+ u16 RxDiscards_WEPICVError;
+ u16 RxDiscards_WEPExcluded;
+} __attribute__ ((packed));
+
+/* Grabbed from wlan-ng - Thanks Mark... - Jean II
+ * This is the result of a scan inquiry command */
+/* Structure describing info about an Access Point */
+struct prism2_scan_apinfo {
+ u16 channel; /* Channel where the AP sits */
+ u16 noise; /* Noise level */
+ u16 level; /* Signal level */
+ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
+ u16 beacon_interv; /* Beacon interval */
+ u16 capabilities; /* Capabilities */
+ u16 essid_len; /* ESSID length */
+ u8 essid[32]; /* ESSID of the network */
+ u8 rates[10]; /* Bit rate supported */
+ u16 proberesp_rate; /* Data rate of the response frame */
+ u16 atim; /* ATIM window time, Kus (hostscan only) */
+} __attribute__ ((packed));
+
+/* Same stuff for the Lucent/Agere card.
+ * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */
+struct agere_scan_apinfo {
+ u16 channel; /* Channel where the AP sits */
+ u16 noise; /* Noise level */
+ u16 level; /* Signal level */
+ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
+ u16 beacon_interv; /* Beacon interval */
+ u16 capabilities; /* Capabilities */
+ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+ u16 essid_len; /* ESSID length */
+ u8 essid[32]; /* ESSID of the network */
+} __attribute__ ((packed));
+
+/* Moustafa: Scan structure for Symbol cards */
+struct symbol_scan_apinfo {
+ u8 channel; /* Channel where the AP sits */
+ u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */
+ u16 noise; /* Noise level */
+ u16 level; /* Signal level */
+ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
+ u16 beacon_interv; /* Beacon interval */
+ u16 capabilities; /* Capabilities */
+ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+ u16 essid_len; /* ESSID length */
+ u8 essid[32]; /* ESSID of the network */
+ u16 rates[5]; /* Bit rate supported */
+ u16 basic_rates; /* Basic rates bitmask */
+ u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */
+ u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */
+} __attribute__ ((packed));
+
+union hermes_scan_info {
+ struct agere_scan_apinfo a;
+ struct prism2_scan_apinfo p;
+ struct symbol_scan_apinfo s;
+};
+
+#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000)
+#define HERMES_LINKSTATUS_CONNECTED (0x0001)
+#define HERMES_LINKSTATUS_DISCONNECTED (0x0002)
+#define HERMES_LINKSTATUS_AP_CHANGE (0x0003)
+#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004)
+#define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005)
+#define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006)
+
+struct hermes_linkstatus {
+ u16 linkstatus; /* Link status */
+} __attribute__ ((packed));
+
+struct hermes_response {
+ u16 status, resp0, resp1, resp2;
+};
+
+/* "ID" structure - used for ESSID and station nickname */
+struct hermes_idstring {
+ u16 len;
+ u16 val[16];
+} __attribute__ ((packed));
+
+struct hermes_multicast {
+ u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN];
+} __attribute__ ((packed));
+
+// #define HERMES_DEBUG_BUFFER 1
+#define HERMES_DEBUG_BUFSIZE 4096
+struct hermes_debug_entry {
+ int bap;
+ u16 id, offset;
+ int cycles;
+};
+
+#ifdef __KERNEL__
+
+/* Timeouts */
+#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */
+
+/* Basic control structure */
+typedef struct hermes {
+ void __iomem *iobase;
+ int reg_spacing;
+#define HERMES_16BIT_REGSPACING 0
+#define HERMES_32BIT_REGSPACING 1
+
+ u16 inten; /* Which interrupts should be enabled? */
+
+#ifdef HERMES_DEBUG_BUFFER
+ struct hermes_debug_entry dbuf[HERMES_DEBUG_BUFSIZE];
+ unsigned long dbufp;
+ unsigned long profile[HERMES_BAP_BUSY_TIMEOUT+1];
+#endif
+} hermes_t;
+
+/* Register access convenience macros */
+#define hermes_read_reg(hw, off) \
+ (ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing )))
+#define hermes_write_reg(hw, off, val) \
+ (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing)))
+#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name)
+#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val))
+
+/* Function prototypes */
+void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing);
+int hermes_init(hermes_t *hw);
+int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+ struct hermes_response *resp);
+int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
+
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
+ u16 id, u16 offset);
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
+ u16 id, u16 offset);
+int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
+ u16 *length, void *buf);
+int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
+ u16 length, const void *value);
+
+/* Inline functions */
+
+static inline int hermes_present(hermes_t *hw)
+{
+ return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC;
+}
+
+static inline void hermes_set_irqmask(hermes_t *hw, u16 events)
+{
+ hw->inten = events;
+ hermes_write_regn(hw, INTEN, events);
+}
+
+static inline int hermes_enable_port(hermes_t *hw, int port)
+{
+ return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
+ 0, NULL);
+}
+
+static inline int hermes_disable_port(hermes_t *hw, int port)
+{
+ return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
+ 0, NULL);
+}
+
+/* Initiate an INQUIRE command (tallies or scan). The result will come as an
+ * information frame in __orinoco_ev_info() */
+static inline int hermes_inquire(hermes_t *hw, u16 rid)
+{
+ return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
+}
+
+#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 )
+#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 )
+
+/* Note that for the next two, the count is in 16-bit words, not bytes */
+static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count)
+{
+ off = off << hw->reg_spacing;
+ ioread16_rep(hw->iobase + off, buf, count);
+}
+
+static inline void hermes_write_words(struct hermes *hw, int off, const void *buf, unsigned count)
+{
+ off = off << hw->reg_spacing;
+ iowrite16_rep(hw->iobase + off, buf, count);
+}
+
+static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count)
+{
+ unsigned i;
+
+ off = off << hw->reg_spacing;
+
+ for (i = 0; i < count; i++)
+ iowrite16(0, hw->iobase + off);
+}
+
+#define HERMES_READ_RECORD(hw, bap, rid, buf) \
+ (hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf)))
+#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
+ (hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf)))
+
+static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word)
+{
+ u16 rec;
+ int err;
+
+ err = HERMES_READ_RECORD(hw, bap, rid, &rec);
+ *word = le16_to_cpu(rec);
+ return err;
+}
+
+static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word)
+{
+ u16 rec = cpu_to_le16(word);
+ return HERMES_WRITE_RECORD(hw, bap, rid, &rec);
+}
+
+#else /* ! __KERNEL__ */
+
+/* These are provided for the benefit of userspace drivers and testing programs
+ which use ioperm() or iopl() */
+
+#define hermes_read_reg(base, off) (inw((base) + (off)))
+#define hermes_write_reg(base, off, val) (outw((val), (base) + (off)))
+
+#define hermes_read_regn(base, name) (hermes_read_reg((base), HERMES_##name))
+#define hermes_write_regn(base, name, val) (hermes_write_reg((base), HERMES_##name, (val)))
+
+/* Note that for the next two, the count is in 16-bit words, not bytes */
+#define hermes_read_data(base, off, buf, count) (insw((base) + (off), (buf), (count)))
+#define hermes_write_data(base, off, buf, count) (outsw((base) + (off), (buf), (count)))
+
+#endif /* ! __KERNEL__ */
+
+#endif /* _HERMES_H */