diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-3945-commands.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-3945-commands.h | 85 |
1 files changed, 66 insertions, 19 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h index 794db78c932..3d3c7e3d37e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h @@ -121,7 +121,7 @@ enum { REPLY_TX_PWR_TABLE_CMD = 0x97, MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ - /* BT config command */ + /* Bluetooth device coexistance config command */ REPLY_BT_CONFIG = 0x9b, /* 4965 Statistics */ @@ -144,25 +144,42 @@ enum { * *****************************************************************************/ +/* iwl3945_cmd_header flags value */ #define IWL_CMD_FAILED_MSK 0x40 +/** + * struct iwl3945_cmd_header + * + * This header format appears in the beginning of each command sent from the + * driver, and each response/notification received from uCode. + */ struct iwl3945_cmd_header { - u8 cmd; - u8 flags; - /* We have 15 LSB to use as we please (MSB indicates - * a frame Rx'd from the HW). We encode the following - * information into the sequence field: + u8 cmd; /* Command ID: REPLY_RXON, etc. */ + u8 flags; /* IWL_CMD_* */ + /* + * The driver sets up the sequence number to values of its chosing. + * uCode does not use this value, but passes it back to the driver + * when sending the response to each driver-originated command, so + * the driver can match the response to the command. Since the values + * don't get used by uCode, the driver may set up an arbitrary format. + * + * There is one exception: uCode sets bit 15 when it originates + * the response/notification, i.e. when the response/notification + * is not a direct response to a command sent by the driver. For + * example, uCode issues REPLY_3945_RX when it sends a received frame + * to the driver; it is not a direct response to any driver command. * - * 0:7 index in fifo - * 8:13 fifo selection - * 14:14 bit indicating if this packet references the 'extra' - * storage at the end of the memory queue - * 15:15 (Rx indication) + * The Linux driver uses the following format: * + * 0:7 index/position within Tx queue + * 8:13 Tx queue selection + * 14:14 driver sets this to indicate command is in the 'huge' + * storage at the end of the command buffers, i.e. scan cmd + * 15:15 uCode sets this in uCode-originated response/notification */ __le16 sequence; - /* command data follows immediately */ + /* command or response/notification data follows immediately */ u8 data[0]; } __attribute__ ((packed)); @@ -176,15 +193,22 @@ struct iwl3945_cmd_header { #define INITIALIZE_SUBTYPE (9) /* - * REPLY_ALIVE = 0x1 (response only, not a command) + * ("Initialize") REPLY_ALIVE = 0x1 (response only, not a command) + * + * uCode issues this "initialize alive" notification once the initialization + * uCode image has completed its work, and is ready to load the runtime image. + * This is the *first* "alive" notification that the driver will receive after + * rebooting uCode; the "initialize" alive is indicated by subtype field == 9. + * + * See comments documenting "BSM" (bootstrap state machine). */ -struct iwl3945_alive_resp { +struct iwl3945_init_alive_resp { u8 ucode_minor; u8 ucode_major; __le16 reserved1; u8 sw_rev[8]; u8 ver_type; - u8 ver_subtype; + u8 ver_subtype; /* "9" for initialize alive */ __le16 reserved2; __le32 log_event_table_ptr; __le32 error_event_table_ptr; @@ -192,16 +216,39 @@ struct iwl3945_alive_resp { __le32 is_valid; } __attribute__ ((packed)); -struct iwl3945_init_alive_resp { + +/** + * REPLY_ALIVE = 0x1 (response only, not a command) + * + * uCode issues this "alive" notification once the runtime image is ready + * to receive commands from the driver. This is the *second* "alive" + * notification that the driver will receive after rebooting uCode; + * this "alive" is indicated by subtype field != 9. + * + * See comments documenting "BSM" (bootstrap state machine). + * + * This response includes two pointers to structures within the device's + * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging: + * + * 1) log_event_table_ptr indicates base of the event log. This traces + * a 256-entry history of uCode execution within a circular buffer. + * + * 2) error_event_table_ptr indicates base of the error log. This contains + * information about any uCode error that occurs. + * + * The Linux driver can print both logs to the system log when a uCode error + * occurs. + */ +struct iwl3945_alive_resp { u8 ucode_minor; u8 ucode_major; __le16 reserved1; u8 sw_rev[8]; u8 ver_type; - u8 ver_subtype; + u8 ver_subtype; /* not "9" for runtime alive */ __le16 reserved2; - __le32 log_event_table_ptr; - __le32 error_event_table_ptr; + __le32 log_event_table_ptr; /* SRAM address for event log */ + __le32 error_event_table_ptr; /* SRAM address for error log */ __le32 timestamp; __le32 is_valid; } __attribute__ ((packed)); |