diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-4965-commands.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-4965-commands.h | 98 |
1 files changed, 85 insertions, 13 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h index 2703c52750b..00d4ab7c7ac 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h @@ -141,7 +141,8 @@ enum { /****************************************************************************** * (0) - * Header + * Commonly used structures and definitions: + * Command header, rate_n_flags * *****************************************************************************/ @@ -167,6 +168,89 @@ struct iwl4965_cmd_header { u8 data[0]; } __attribute__ ((packed)); +/** + * 4965 rate_n_flags bit fields + * + * rate_n_flags format is used in following 4965 commands: + * REPLY_4965_RX (response only) + * REPLY_TX (both command and response) + * REPLY_TX_LINK_QUALITY_CMD + * + * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"): + * 2-0: 0) 6 Mbps + * 1) 12 Mbps + * 2) 18 Mbps + * 3) 24 Mbps + * 4) 36 Mbps + * 5) 48 Mbps + * 6) 54 Mbps + * 7) 60 Mbps + * + * 3: 0) Single stream (SISO) + * 1) Dual stream (MIMO) + * + * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps FAT duplicate data + * + * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"): + * 3-0: 0xD) 6 Mbps + * 0xF) 9 Mbps + * 0x5) 12 Mbps + * 0x7) 18 Mbps + * 0x9) 24 Mbps + * 0xB) 36 Mbps + * 0x1) 48 Mbps + * 0x3) 54 Mbps + * + * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"): + * 3-0: 10) 1 Mbps + * 20) 2 Mbps + * 55) 5.5 Mbps + * 110) 11 Mbps + */ +#define RATE_MCS_CODE_MSK 0x7 +#define RATE_MCS_MIMO_POS 3 +#define RATE_MCS_MIMO_MSK 0x8 +#define RATE_MCS_HT_DUP_POS 5 +#define RATE_MCS_HT_DUP_MSK 0x20 + +/* (1) HT format, (0) legacy format in bits 7:0 */ +#define RATE_MCS_FLAGS_POS 8 +#define RATE_MCS_HT_POS 8 +#define RATE_MCS_HT_MSK 0x100 + +/* (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ +#define RATE_MCS_CCK_POS 9 +#define RATE_MCS_CCK_MSK 0x200 + +/* (1) Use Green Field preamble */ +#define RATE_MCS_GF_POS 10 +#define RATE_MCS_GF_MSK 0x400 + +/* (1) Use 40Mhz FAT channel width, (0) use 20 MHz legacy channel width */ +#define RATE_MCS_FAT_POS 11 +#define RATE_MCS_FAT_MSK 0x800 + +/* (1) Duplicate data on both 20MHz channels. FAT (bit 11) must be set. */ +#define RATE_MCS_DUP_POS 12 +#define RATE_MCS_DUP_MSK 0x1000 + +/* (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ +#define RATE_MCS_SGI_POS 13 +#define RATE_MCS_SGI_MSK 0x2000 + +/** + * rate_n_flags Tx antenna masks (4965 has 2 transmitters): + * bit14:15 01 B inactive, A active + * 10 B active, A inactive + * 11 Both active + */ +#define RATE_MCS_ANT_A_POS 14 +#define RATE_MCS_ANT_B_POS 15 +#define RATE_MCS_ANT_A_MSK 0x4000 +#define RATE_MCS_ANT_B_MSK 0x8000 +#define RATE_MCS_ANT_AB_MSK 0xc000 + + /****************************************************************************** * (0a) * Alive and Error Commands & Responses: @@ -452,18 +536,6 @@ struct iwl4965_qosparam_cmd { #define STA_MODIFY_DELBA_TID_MSK 0x10 #define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid)) -/* - * Antenna masks: - * bit14:15 01 B inactive, A active - * 10 B active, A inactive - * 11 Both active - */ -#define RATE_MCS_ANT_A_POS 14 -#define RATE_MCS_ANT_B_POS 15 -#define RATE_MCS_ANT_A_MSK 0x4000 -#define RATE_MCS_ANT_B_MSK 0x8000 -#define RATE_MCS_ANT_AB_MSK 0xc000 - struct iwl4965_keyinfo { __le16 key_flags; u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */ |