diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-commands.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-commands.h | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 39ede5727fe..6188c54113b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -283,7 +283,7 @@ struct iwl3945_power_per_rate { * 1) Dual stream (MIMO) * 2) Triple stream (MIMO) * - * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps FAT duplicate data + * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data * * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"): * 3-0: 0xD) 6 Mbps @@ -320,11 +320,11 @@ struct iwl3945_power_per_rate { #define RATE_MCS_GF_POS 10 #define RATE_MCS_GF_MSK 0x400 -/* Bit 11: (1) Use 40Mhz FAT chnl width, (0) use 20 MHz legacy chnl width */ -#define RATE_MCS_FAT_POS 11 -#define RATE_MCS_FAT_MSK 0x800 +/* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */ +#define RATE_MCS_HT40_POS 11 +#define RATE_MCS_HT40_MSK 0x800 -/* Bit 12: (1) Duplicate data on both 20MHz chnls. FAT (bit 11) must be set. */ +/* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */ #define RATE_MCS_DUP_POS 12 #define RATE_MCS_DUP_MSK 0x1000 @@ -459,7 +459,7 @@ struct iwl_init_alive_resp { /* calibration values from "initialize" uCode */ __le32 voltage; /* signed, higher value is lower voltage */ - __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for FAT channel*/ + __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for HT40 */ __le32 therm_r2[2]; /* signed */ __le32 therm_r3[2]; /* signed */ __le32 therm_r4[2]; /* signed */ @@ -610,7 +610,7 @@ enum { #define RXON_FLG_HT_OPERATING_MODE_POS (23) #define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23) -#define RXON_FLG_FAT_PROT_MSK cpu_to_le32(0x2 << 23) +#define RXON_FLG_HT40_PROT_MSK cpu_to_le32(0x2 << 23) #define RXON_FLG_CHANNEL_MODE_POS (25) #define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25) @@ -891,7 +891,7 @@ struct iwl_qosparam_cmd { #define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18) #define STA_FLG_MAX_AGG_SIZE_POS (19) #define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19) -#define STA_FLG_FAT_EN_MSK cpu_to_le32(1 << 21) +#define STA_FLG_HT40_EN_MSK cpu_to_le32(1 << 21) #define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22) #define STA_FLG_AGG_MPDU_DENSITY_POS (23) #define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23) @@ -1984,10 +1984,10 @@ struct iwl_link_qual_agg_params { * a) Use this same initial rate for first 3 entries. * b) Find next lower available rate using same mode (SISO or MIMO), * use for next 3 entries. If no lower rate available, switch to - * legacy mode (no FAT channel, no MIMO, no short guard interval). + * legacy mode (no HT40 channel, no MIMO, no short guard interval). * c) If using MIMO, set command's mimo_delimiter to number of entries * using MIMO (3 or 6). - * d) After trying 2 HT rates, switch to legacy mode (no FAT channel, + * d) After trying 2 HT rates, switch to legacy mode (no HT40 channel, * no MIMO, no short guard interval), at the next lower bit rate * (e.g. if second HT bit rate was 54, try 48 legacy), and follow * legacy procedure for remaining table entries. @@ -3017,7 +3017,7 @@ struct iwl_statistics_cmd { * one channel that has just been scanned. */ #define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2) -#define STATISTICS_REPLY_FLG_FAT_MODE_MSK cpu_to_le32(0x8) +#define STATISTICS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8) struct iwl3945_notif_statistics { __le32 flag; |