1 files changed, 555 insertions, 7 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 2dfd982d7d1..c4b5c1a100f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -34,9 +34,11 @@
 struct iwl_priv; /* FIXME: remove */
 #include "iwl-debug.h"
 #include "iwl-eeprom.h"
-#include "iwl-4965.h" /* FIXME: remove */
+#include "iwl-dev.h" /* FIXME: remove */
 #include "iwl-core.h"
+#include "iwl-io.h"
 #include "iwl-rfkill.h"
+#include "iwl-power.h"
 
 
 MODULE_DESCRIPTION("iwl core");
@@ -49,6 +51,45 @@ u32 iwl_debug_level;
 EXPORT_SYMBOL(iwl_debug_level);
 #endif
 
+#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np)    \
+	[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,      \
+				    IWL_RATE_SISO_##s##M_PLCP, \
+				    IWL_RATE_MIMO2_##s##M_PLCP,\
+				    IWL_RATE_MIMO3_##s##M_PLCP,\
+				    IWL_RATE_##r##M_IEEE,      \
+				    IWL_RATE_##ip##M_INDEX,    \
+				    IWL_RATE_##in##M_INDEX,    \
+				    IWL_RATE_##rp##M_INDEX,    \
+				    IWL_RATE_##rn##M_INDEX,    \
+				    IWL_RATE_##pp##M_INDEX,    \
+				    IWL_RATE_##np##M_INDEX }
+
+/*
+ * Parameter order:
+ *   rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
+ *
+ * If there isn't a valid next or previous rate then INV is used which
+ * maps to IWL_RATE_INVALID
+ *
+ */
+const struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT] = {
+	IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2),    /*  1mbps */
+	IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5),          /*  2mbps */
+	IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
+	IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18),      /* 11mbps */
+	IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
+	IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11),       /*  9mbps */
+	IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
+	IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24),   /* 18mbps */
+	IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36),   /* 24mbps */
+	IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
+	IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
+	IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
+	IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
+	/* FIXME:RS:          ^^    should be INV (legacy) */
+};
+EXPORT_SYMBOL(iwl4965_rates);
+
 /* This function both allocates and initializes hw and priv. */
 struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
 		struct ieee80211_ops *hw_ops)
@@ -72,6 +113,14 @@ out:
 }
 EXPORT_SYMBOL(iwl_alloc_all);
 
+void iwl_hw_detect(struct iwl_priv *priv)
+{
+	priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
+	priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
+	pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
+}
+EXPORT_SYMBOL(iwl_hw_detect);
+
 /**
  * iwlcore_clear_stations_table - Clear the driver's station table
  *
@@ -90,7 +139,7 @@ void iwlcore_clear_stations_table(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwlcore_clear_stations_table);
 
-void iwlcore_reset_qos(struct iwl_priv *priv)
+void iwl_reset_qos(struct iwl_priv *priv)
 {
 	u16 cw_min = 15;
 	u16 cw_max = 1023;
@@ -176,7 +225,289 @@ void iwlcore_reset_qos(struct iwl_priv *priv)
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
-EXPORT_SYMBOL(iwlcore_reset_qos);
+EXPORT_SYMBOL(iwl_reset_qos);
+
+#ifdef CONFIG_IWL4965_HT
+static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
+			      struct ieee80211_ht_info *ht_info,
+			      enum ieee80211_band band)
+{
+	ht_info->cap = 0;
+	memset(ht_info->supp_mcs_set, 0, 16);
+
+	ht_info->ht_supported = 1;
+
+	if (priv->hw_params.fat_channel & BIT(band)) {
+		ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH;
+		ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40;
+		ht_info->supp_mcs_set[4] = 0x01;
+	}
+	ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD;
+	ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20;
+	ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS &
+			     (IWL_MIMO_PS_NONE << 2));
+
+	if (priv->cfg->mod_params->amsdu_size_8K)
+		ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU;
+
+	ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
+	ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
+
+	ht_info->supp_mcs_set[0] = 0xFF;
+	if (priv->hw_params.tx_chains_num >= 2)
+		ht_info->supp_mcs_set[1] = 0xFF;
+	if (priv->hw_params.tx_chains_num >= 3)
+		ht_info->supp_mcs_set[2] = 0xFF;
+}
+#endif /* CONFIG_IWL4965_HT */
+
+static void iwlcore_init_hw_rates(struct iwl_priv *priv,
+			      struct ieee80211_rate *rates)
+{
+	int i;
+
+	for (i = 0; i < IWL_RATE_COUNT; i++) {
+		rates[i].bitrate = iwl4965_rates[i].ieee * 5;
+		rates[i].hw_value = i; /* Rate scaling will work on indexes */
+		rates[i].hw_value_short = i;
+		rates[i].flags = 0;
+		if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
+			/*
+			 * If CCK != 1M then set short preamble rate flag.
+			 */
+			rates[i].flags |=
+				(iwl4965_rates[i].plcp == IWL_RATE_1M_PLCP) ?
+					0 : IEEE80211_RATE_SHORT_PREAMBLE;
+		}
+	}
+}
+
+/**
+ * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
+ */
+static int iwlcore_init_geos(struct iwl_priv *priv)
+{
+	struct iwl_channel_info *ch;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *channels;
+	struct ieee80211_channel *geo_ch;
+	struct ieee80211_rate *rates;
+	int i = 0;
+
+	if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
+	    priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
+		IWL_DEBUG_INFO("Geography modes already initialized.\n");
+		set_bit(STATUS_GEO_CONFIGURED, &priv->status);
+		return 0;
+	}
+
+	channels = kzalloc(sizeof(struct ieee80211_channel) *
+			   priv->channel_count, GFP_KERNEL);
+	if (!channels)
+		return -ENOMEM;
+
+	rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
+			GFP_KERNEL);
+	if (!rates) {
+		kfree(channels);
+		return -ENOMEM;
+	}
+
+	/* 5.2GHz channels start after the 2.4GHz channels */
+	sband = &priv->bands[IEEE80211_BAND_5GHZ];
+	sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
+	/* just OFDM */
+	sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
+	sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
+
+	iwlcore_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_5GHZ);
+
+	sband = &priv->bands[IEEE80211_BAND_2GHZ];
+	sband->channels = channels;
+	/* OFDM & CCK */
+	sband->bitrates = rates;
+	sband->n_bitrates = IWL_RATE_COUNT;
+
+	iwlcore_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_2GHZ);
+
+	priv->ieee_channels = channels;
+	priv->ieee_rates = rates;
+
+	iwlcore_init_hw_rates(priv, rates);
+
+	for (i = 0;  i < priv->channel_count; i++) {
+		ch = &priv->channel_info[i];
+
+		/* FIXME: might be removed if scan is OK */
+		if (!is_channel_valid(ch))
+			continue;
+
+		if (is_channel_a_band(ch))
+			sband =  &priv->bands[IEEE80211_BAND_5GHZ];
+		else
+			sband =  &priv->bands[IEEE80211_BAND_2GHZ];
+
+		geo_ch = &sband->channels[sband->n_channels++];
+
+		geo_ch->center_freq =
+				ieee80211_channel_to_frequency(ch->channel);
+		geo_ch->max_power = ch->max_power_avg;
+		geo_ch->max_antenna_gain = 0xff;
+		geo_ch->hw_value = ch->channel;
+
+		if (is_channel_valid(ch)) {
+			if (!(ch->flags & EEPROM_CHANNEL_IBSS))
+				geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
+
+			if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
+				geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+
+			if (ch->flags & EEPROM_CHANNEL_RADAR)
+				geo_ch->flags |= IEEE80211_CHAN_RADAR;
+
+			if (ch->max_power_avg > priv->max_channel_txpower_limit)
+				priv->max_channel_txpower_limit =
+				    ch->max_power_avg;
+		} else {
+			geo_ch->flags |= IEEE80211_CHAN_DISABLED;
+		}
+
+		/* Save flags for reg domain usage */
+		geo_ch->orig_flags = geo_ch->flags;
+
+		IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
+				ch->channel, geo_ch->center_freq,
+				is_channel_a_band(ch) ?  "5.2" : "2.4",
+				geo_ch->flags & IEEE80211_CHAN_DISABLED ?
+				"restricted" : "valid",
+				 geo_ch->flags);
+	}
+
+	if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
+	     priv->cfg->sku & IWL_SKU_A) {
+		printk(KERN_INFO DRV_NAME
+		       ": Incorrectly detected BG card as ABG.  Please send "
+		       "your PCI ID 0x%04X:0x%04X to maintainer.\n",
+		       priv->pci_dev->device, priv->pci_dev->subsystem_device);
+		priv->cfg->sku &= ~IWL_SKU_A;
+	}
+
+	printk(KERN_INFO DRV_NAME
+	       ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
+	       priv->bands[IEEE80211_BAND_2GHZ].n_channels,
+	       priv->bands[IEEE80211_BAND_5GHZ].n_channels);
+
+	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
+		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+			&priv->bands[IEEE80211_BAND_2GHZ];
+	if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
+		priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+			&priv->bands[IEEE80211_BAND_5GHZ];
+
+	set_bit(STATUS_GEO_CONFIGURED, &priv->status);
+
+	return 0;
+}
+
+/*
+ * iwlcore_free_geos - undo allocations in iwlcore_init_geos
+ */
+void iwlcore_free_geos(struct iwl_priv *priv)
+{
+	kfree(priv->ieee_channels);
+	kfree(priv->ieee_rates);
+	clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
+}
+EXPORT_SYMBOL(iwlcore_free_geos);
+
+#ifdef CONFIG_IWL4965_HT
+static u8 is_single_rx_stream(struct iwl_priv *priv)
+{
+	return !priv->current_ht_config.is_ht ||
+	       ((priv->current_ht_config.supp_mcs_set[1] == 0) &&
+		(priv->current_ht_config.supp_mcs_set[2] == 0)) ||
+	       priv->ps_mode == IWL_MIMO_PS_STATIC;
+}
+#else
+static inline u8 is_single_rx_stream(struct iwl_priv *priv)
+{
+	return 1;
+}
+#endif	/*CONFIG_IWL4965_HT */
+
+/*
+ * Determine how many receiver/antenna chains to use.
+ * More provides better reception via diversity.  Fewer saves power.
+ * MIMO (dual stream) requires at least 2, but works better with 3.
+ * This does not determine *which* chains to use, just how many.
+ */
+static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
+					u8 *idle_state, u8 *rx_state)
+{
+	u8 is_single = is_single_rx_stream(priv);
+	u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
+
+	/* # of Rx chains to use when expecting MIMO. */
+	if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
+		*rx_state = 2;
+	else
+		*rx_state = 3;
+
+	/* # Rx chains when idling and maybe trying to save power */
+	switch (priv->ps_mode) {
+	case IWL_MIMO_PS_STATIC:
+	case IWL_MIMO_PS_DYNAMIC:
+		*idle_state = (is_cam) ? 2 : 1;
+		break;
+	case IWL_MIMO_PS_NONE:
+		*idle_state = (is_cam) ? *rx_state : 1;
+		break;
+	default:
+		*idle_state = 1;
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
+ *
+ * Selects how many and which Rx receivers/antennas/chains to use.
+ * This should not be used for scan command ... it puts data in wrong place.
+ */
+void iwl_set_rxon_chain(struct iwl_priv *priv)
+{
+	u8 is_single = is_single_rx_stream(priv);
+	u8 idle_state, rx_state;
+
+	priv->staging_rxon.rx_chain = 0;
+	rx_state = idle_state = 3;
+
+	/* Tell uCode which antennas are actually connected.
+	 * Before first association, we assume all antennas are connected.
+	 * Just after first association, iwl_chain_noise_calibration()
+	 *    checks which antennas actually *are* connected. */
+	priv->staging_rxon.rx_chain |=
+		    cpu_to_le16(priv->hw_params.valid_rx_ant <<
+						 RXON_RX_CHAIN_VALID_POS);
+
+	/* How many receivers should we use? */
+	iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state);
+	priv->staging_rxon.rx_chain |=
+		cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
+	priv->staging_rxon.rx_chain |=
+		cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
+
+	if (!is_single && (rx_state >= 2) &&
+	    !test_bit(STATUS_POWER_PMI, &priv->status))
+		priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
+	else
+		priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
+
+	IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
+}
+EXPORT_SYMBOL(iwl_set_rxon_chain);
 
 /**
  * iwlcore_set_rxon_channel - Set the phymode and channel values in staging RXON
@@ -188,7 +519,7 @@ EXPORT_SYMBOL(iwlcore_reset_qos);
  * NOTE:  Does not commit to the hardware; it sets appropriate bit fields
  * in the staging RXON flag structure based on the phymode
  */
-int iwlcore_set_rxon_channel(struct iwl_priv *priv,
+int iwl_set_rxon_channel(struct iwl_priv *priv,
 				enum ieee80211_band band,
 				u16 channel)
 {
@@ -214,7 +545,7 @@ int iwlcore_set_rxon_channel(struct iwl_priv *priv,
 
 	return 0;
 }
-EXPORT_SYMBOL(iwlcore_set_rxon_channel);
+EXPORT_SYMBOL(iwl_set_rxon_channel);
 
 static void iwlcore_init_hw(struct iwl_priv *priv)
 {
@@ -237,15 +568,96 @@ static void iwlcore_init_hw(struct iwl_priv *priv)
 	hw->queues = 4;
 #ifdef CONFIG_IWL4965_HT
 	/* Enhanced value; more queues, to support 11n aggregation */
-	hw->queues = 16;
+	hw->ampdu_queues = 12;
 #endif /* CONFIG_IWL4965_HT */
 }
 
+static int iwlcore_init_drv(struct iwl_priv *priv)
+{
+	int ret;
+	int i;
+
+	priv->retry_rate = 1;
+	priv->ibss_beacon = NULL;
+
+	spin_lock_init(&priv->lock);
+	spin_lock_init(&priv->power_data.lock);
+	spin_lock_init(&priv->sta_lock);
+	spin_lock_init(&priv->hcmd_lock);
+	spin_lock_init(&priv->lq_mngr.lock);
+
+	for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++)
+		INIT_LIST_HEAD(&priv->ibss_mac_hash[i]);
+
+	INIT_LIST_HEAD(&priv->free_frames);
+
+	mutex_init(&priv->mutex);
+
+	/* Clear the driver's (not device's) station table */
+	iwlcore_clear_stations_table(priv);
+
+	priv->data_retry_limit = -1;
+	priv->ieee_channels = NULL;
+	priv->ieee_rates = NULL;
+	priv->band = IEEE80211_BAND_2GHZ;
+
+	priv->iw_mode = IEEE80211_IF_TYPE_STA;
+
+	priv->use_ant_b_for_management_frame = 1; /* start with ant B */
+	priv->ps_mode = IWL_MIMO_PS_NONE;
+
+	/* Choose which receivers/antennas to use */
+	iwl_set_rxon_chain(priv);
+
+	iwl_reset_qos(priv);
+
+	priv->qos_data.qos_active = 0;
+	priv->qos_data.qos_cap.val = 0;
+
+	iwl_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
+
+	priv->rates_mask = IWL_RATES_MASK;
+	/* If power management is turned on, default to AC mode */
+	priv->power_mode = IWL_POWER_AC;
+	priv->user_txpower_limit = IWL_DEFAULT_TX_POWER;
+
+	ret = iwl_init_channel_map(priv);
+	if (ret) {
+		IWL_ERROR("initializing regulatory failed: %d\n", ret);
+		goto err;
+	}
+
+	ret = iwlcore_init_geos(priv);
+	if (ret) {
+		IWL_ERROR("initializing geos failed: %d\n", ret);
+		goto err_free_channel_map;
+	}
+
+	ret = ieee80211_register_hw(priv->hw);
+	if (ret) {
+		IWL_ERROR("Failed to register network device (error %d)\n",
+				ret);
+		goto err_free_geos;
+	}
+
+	priv->hw->conf.beacon_int = 100;
+	priv->mac80211_registered = 1;
+
+	return 0;
+
+err_free_geos:
+	iwlcore_free_geos(priv);
+err_free_channel_map:
+	iwl_free_channel_map(priv);
+err:
+	return ret;
+}
+
 int iwl_setup(struct iwl_priv *priv)
 {
 	int ret = 0;
 	iwlcore_init_hw(priv);
-	ret = priv->cfg->ops->lib->init_drv(priv);
+	ret = iwlcore_init_drv(priv);
 	return ret;
 }
 EXPORT_SYMBOL(iwl_setup);
@@ -263,8 +675,10 @@ int iwlcore_low_level_notify(struct iwl_priv *priv,
 		if (ret)
 			IWL_ERROR("Unable to initialize RFKILL system. "
 				  "Ignoring error: %d\n", ret);
+		iwl_power_initialize(priv);
 		break;
 	case IWLCORE_START_EVT:
+		iwl_power_update_mode(priv, 1);
 		break;
 	case IWLCORE_STOP_EVT:
 		break;
@@ -290,3 +704,137 @@ int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags)
 }
 EXPORT_SYMBOL(iwl_send_statistics_request);
 
+/**
+ * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
+ *   using sample data 100 bytes apart.  If these sample points are good,
+ *   it's a pretty good bet that everything between them is good, too.
+ */
+static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
+{
+	u32 val;
+	int ret = 0;
+	u32 errcnt = 0;
+	u32 i;
+
+	IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
+
+	ret = iwl_grab_nic_access(priv);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
+		/* read data comes through single port, auto-incr addr */
+		/* NOTE: Use the debugless read so we don't flood kernel log
+		 * if IWL_DL_IO is set */
+		iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
+			i + RTC_INST_LOWER_BOUND);
+		val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+		if (val != le32_to_cpu(*image)) {
+			ret = -EIO;
+			errcnt++;
+			if (errcnt >= 3)
+				break;
+		}
+	}
+
+	iwl_release_nic_access(priv);
+
+	return ret;
+}
+
+/**
+ * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host,
+ *     looking at all data.
+ */
+static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
+				 u32 len)
+{
+	u32 val;
+	u32 save_len = len;
+	int ret = 0;
+	u32 errcnt;
+
+	IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
+
+	ret = iwl_grab_nic_access(priv);
+	if (ret)
+		return ret;
+
+	iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND);
+
+	errcnt = 0;
+	for (; len > 0; len -= sizeof(u32), image++) {
+		/* read data comes through single port, auto-incr addr */
+		/* NOTE: Use the debugless read so we don't flood kernel log
+		 * if IWL_DL_IO is set */
+		val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+		if (val != le32_to_cpu(*image)) {
+			IWL_ERROR("uCode INST section is invalid at "
+				  "offset 0x%x, is 0x%x, s/b 0x%x\n",
+				  save_len - len, val, le32_to_cpu(*image));
+			ret = -EIO;
+			errcnt++;
+			if (errcnt >= 20)
+				break;
+		}
+	}
+
+	iwl_release_nic_access(priv);
+
+	if (!errcnt)
+		IWL_DEBUG_INFO
+		    ("ucode image in INSTRUCTION memory is good\n");
+
+	return ret;
+}
+
+/**
+ * iwl_verify_ucode - determine which instruction image is in SRAM,
+ *    and verify its contents
+ */
+int iwl_verify_ucode(struct iwl_priv *priv)
+{
+	__le32 *image;
+	u32 len;
+	int ret;
+
+	/* Try bootstrap */
+	image = (__le32 *)priv->ucode_boot.v_addr;
+	len = priv->ucode_boot.len;
+	ret = iwlcore_verify_inst_sparse(priv, image, len);
+	if (!ret) {
+		IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
+		return 0;
+	}
+
+	/* Try initialize */
+	image = (__le32 *)priv->ucode_init.v_addr;
+	len = priv->ucode_init.len;
+	ret = iwlcore_verify_inst_sparse(priv, image, len);
+	if (!ret) {
+		IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
+		return 0;
+	}
+
+	/* Try runtime/protocol */
+	image = (__le32 *)priv->ucode_code.v_addr;
+	len = priv->ucode_code.len;
+	ret = iwlcore_verify_inst_sparse(priv, image, len);
+	if (!ret) {
+		IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
+		return 0;
+	}
+
+	IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
+
+	/* Since nothing seems to match, show first several data entries in
+	 * instruction SRAM, so maybe visual inspection will give a clue.
+	 * Selection of bootstrap image (vs. other images) is arbitrary. */
+	image = (__le32 *)priv->ucode_boot.v_addr;
+	len = priv->ucode_boot.len;
+	ret = iwl_verify_inst_full(priv, image, len);
+
+	return ret;
+}
+EXPORT_SYMBOL(iwl_verify_ucode);
+